Proton exchange membrane fuel cells(PEMFCs)constitute a promising avenue for environmentally friendly power generation.However,the reliance on unsustainable platinum-based electrocatalysts used at the electrodes poses...Proton exchange membrane fuel cells(PEMFCs)constitute a promising avenue for environmentally friendly power generation.However,the reliance on unsustainable platinum-based electrocatalysts used at the electrodes poses challenges to the commercial viability of PEMFCs.Non-platinum group metal(non-PGM)alternatives,like nitrogen-coordinated transition metals in atomic dispersion(M–N–C catalysts),show significant potential.This work presents a comparative study of two distinct sets of Fe–N–C materials,prepared by pyrolyzing hybrid composites of polyaniline(PANI)and iron(Ⅱ)chloride on a hard template.One set uses bipyridine(BPy)as an additional nitrogen source and iron ligand,offering an innovative approach.The findings reveal that the choice of pyrolysis temperature and atmosphere influences the catalyst properties.The use of ammonia in pyrolysis emerges as a crucial parameter for promoting atomic dispersion of iron,as well as increasing surface area and porosity.The optimal catalyst,prepared using BPy and ammonia,exhibits a half-wave potential of 0.834 V in 0.5 M H_(2)SO_(4)(catalyst loading of 0.6 mg cm^(-2)),a mass activity exceeding 3 A g^(-1)and high stability in acidic electrolyte,positioning it as a promising non-PGM structure in the field.展开更多
[目的]为进一步拓展单原子催化剂在亚硝酸盐还原制氨领域的应用,提出了一种铁-氮-碳(Fe-N-C)单原子催化剂电催化亚硝酸盐还原制氨的新体系.[方法]以二氧化硅为硬模板,2,6-二氨基吡啶为碳氮前驱体,硝酸铁为金属盐,通过“热解-刻蚀”策略...[目的]为进一步拓展单原子催化剂在亚硝酸盐还原制氨领域的应用,提出了一种铁-氮-碳(Fe-N-C)单原子催化剂电催化亚硝酸盐还原制氨的新体系.[方法]以二氧化硅为硬模板,2,6-二氨基吡啶为碳氮前驱体,硝酸铁为金属盐,通过“热解-刻蚀”策略制备了Fe-N-C单原子催化剂,并将其应用于亚硝酸盐制氨反应.[结果]多种结构表征结果显示,Fe-N-C催化剂表面的Fe物种呈现高度分散特征并以单原子形式存在.此外,Fe物种的化学环境主要是+2和+3价混合态,且通过与4个吡啶氮配位而稳定存在,即Fe-N-C催化剂的金属中心微观配位环境为Fe-N4结构.与纯氮碳(N-C)载体相比,本研究制备的Fe-N-C催化剂具有优异的亚硝酸盐还原性能,不仅表现出更高的起始还原电位(0 V vs可逆氢电极),具有接近100%的产氨法拉第效率和高的氨产率[8.4 mg/(h·cm^(2))],并且在连续20次催化循环测试中显示出优异的催化稳定性.[结论]本研究制备的Fe-N-C单原子催化剂对亚硝酸盐还原制氨具有优异的电催化活性,其高活性可能来源于对NO_(2)^(-)的显著吸附,并进一步促进活性氢参与脱氧加氢过程.该Fe-N-C单原子催化亚硝酸盐还原体系可为后续合成氨的活性中心设计提供指导方向.展开更多
Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel ce...Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel cells(PEMFCs),however suffer from low site density of active Fe-N4 moiety and limited mass transport during the catalytic reaction.To address these challenges,we report a three-dimensional(3D) metal-organic frameworks(MOF)-derived Fe-N-C single-atom catalyst.In this well-designed Fe-N-C catalyst,the micro-scale interconnected skeleton,the nano-scale ordered pores and the atomic-scale abundant carbon edge defects inside the skeleton significantly enhance the site density of active Fe-N4 moiety,thus improving the Fe utilization in the final catalyst.Moreover,the combination of the above mentioned micro-and nano-scale structures greatly facilitates the mass transport in the 3D Fe-N-C catalyst.Therefore,the multiscale engineered Fe-N-C single-atom catalyst achieves excellent ORR performance under acidic condition and affords a significantly enhanced current density and power density in PEMFC.Our findings may open new opportunities for the rational design of FeN-C catalysts through multiscale structural engineering.展开更多
Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication ...Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.展开更多
Designing highly efficient non-precious based electrocatalysts for oxygen reduction reaction(ORR) is of significance for the rapid development of metal-air batteries.Herein,a hydrothermal-pyrolysis method is employed ...Designing highly efficient non-precious based electrocatalysts for oxygen reduction reaction(ORR) is of significance for the rapid development of metal-air batteries.Herein,a hydrothermal-pyrolysis method is employed to fabricate Fe,N co-doped porous carbon materials as effective ORR electrocatalyst through adopting graphitic carbon nitride(g-C_(3)N_(4)) as both the self-sacrificial templates and N sources.The gC_(3)N_(4)provides a high concentration of unsaturated pyridine-type N to coordinate with iron to form Fe-N active sites.Through adjusting the Fe doping amounts,it is proved that appropriate Fe doping content is conducive to the construction of abundant defects and active sites of Fe-N.The as-prepared catalyst exhibits superior electrocatalytic ORR performance in alkaline media with half-wave potential(E_(1/2)=0.82 V) and onset potential(E_(onset)=0.95 V),equivalent to the commercial Pt/C catalyst.Moreover,there is almost no activity loss after 10 k continuous cyclic voltammetry cycles and methanol tolerance,indicating the excellent durability and superior methanol tolerance.Remarkably,when assembled as the cathode in a Zn-air battery,the device displays a power density of 99 mW/cm^(2),an open-circuit potential of 1.48 V and long-term discharge-charge cycling stability,indicating the promising potential to substitute the Pt catalyst for practical application.展开更多
A novel coordination polymer, [Fe(C 5H 4NCOO) 2] n, was synthesized by hydrothermal reaction and characterized by elemental analysis as well as IR spectroscopy. The crystal structure (with a novel 3-D network) of this...A novel coordination polymer, [Fe(C 5H 4NCOO) 2] n, was synthesized by hydrothermal reaction and characterized by elemental analysis as well as IR spectroscopy. The crystal structure (with a novel 3-D network) of this compound belongs to monoclinic, space group P2 1/n, a=0.49544(1) nm, b=1.32443(2) nm, c=1.04983(1) nm, β=101.586(1)°. The diffuse reflectance spectra (200～2500 nm) showed that the polymer had strong absorbance in 375～563 nm (E g≈2.5 eV) region and weak absorbance from 720 to 2500 nm (near infrared spectra).展开更多
基金funding from the Hellenic Foundation for Research and Innovation(HFRI)under grant agreement No 3655.
文摘Proton exchange membrane fuel cells(PEMFCs)constitute a promising avenue for environmentally friendly power generation.However,the reliance on unsustainable platinum-based electrocatalysts used at the electrodes poses challenges to the commercial viability of PEMFCs.Non-platinum group metal(non-PGM)alternatives,like nitrogen-coordinated transition metals in atomic dispersion(M–N–C catalysts),show significant potential.This work presents a comparative study of two distinct sets of Fe–N–C materials,prepared by pyrolyzing hybrid composites of polyaniline(PANI)and iron(Ⅱ)chloride on a hard template.One set uses bipyridine(BPy)as an additional nitrogen source and iron ligand,offering an innovative approach.The findings reveal that the choice of pyrolysis temperature and atmosphere influences the catalyst properties.The use of ammonia in pyrolysis emerges as a crucial parameter for promoting atomic dispersion of iron,as well as increasing surface area and porosity.The optimal catalyst,prepared using BPy and ammonia,exhibits a half-wave potential of 0.834 V in 0.5 M H_(2)SO_(4)(catalyst loading of 0.6 mg cm^(-2)),a mass activity exceeding 3 A g^(-1)and high stability in acidic electrolyte,positioning it as a promising non-PGM structure in the field.
文摘[目的]为进一步拓展单原子催化剂在亚硝酸盐还原制氨领域的应用,提出了一种铁-氮-碳(Fe-N-C)单原子催化剂电催化亚硝酸盐还原制氨的新体系.[方法]以二氧化硅为硬模板,2,6-二氨基吡啶为碳氮前驱体,硝酸铁为金属盐,通过“热解-刻蚀”策略制备了Fe-N-C单原子催化剂,并将其应用于亚硝酸盐制氨反应.[结果]多种结构表征结果显示,Fe-N-C催化剂表面的Fe物种呈现高度分散特征并以单原子形式存在.此外,Fe物种的化学环境主要是+2和+3价混合态,且通过与4个吡啶氮配位而稳定存在,即Fe-N-C催化剂的金属中心微观配位环境为Fe-N4结构.与纯氮碳(N-C)载体相比,本研究制备的Fe-N-C催化剂具有优异的亚硝酸盐还原性能,不仅表现出更高的起始还原电位(0 V vs可逆氢电极),具有接近100%的产氨法拉第效率和高的氨产率[8.4 mg/(h·cm^(2))],并且在连续20次催化循环测试中显示出优异的催化稳定性.[结论]本研究制备的Fe-N-C单原子催化剂对亚硝酸盐还原制氨具有优异的电催化活性,其高活性可能来源于对NO_(2)^(-)的显著吸附,并进一步促进活性氢参与脱氧加氢过程.该Fe-N-C单原子催化亚硝酸盐还原体系可为后续合成氨的活性中心设计提供指导方向.
基金supported by the National Natural Science Foundation of China(51722103,52071231 and 51571149)the Natural Science Foundation of Tianjin City(19JCJQJC61900)。
文摘Atomically dispersed iron-nitrogen-carbon(Fe-N-C) catalysts have emerged as the most promising alternative to the expensive Pt-based catalysts for the oxygen reduction reaction(ORR) in proton exchange membrane fuel cells(PEMFCs),however suffer from low site density of active Fe-N4 moiety and limited mass transport during the catalytic reaction.To address these challenges,we report a three-dimensional(3D) metal-organic frameworks(MOF)-derived Fe-N-C single-atom catalyst.In this well-designed Fe-N-C catalyst,the micro-scale interconnected skeleton,the nano-scale ordered pores and the atomic-scale abundant carbon edge defects inside the skeleton significantly enhance the site density of active Fe-N4 moiety,thus improving the Fe utilization in the final catalyst.Moreover,the combination of the above mentioned micro-and nano-scale structures greatly facilitates the mass transport in the 3D Fe-N-C catalyst.Therefore,the multiscale engineered Fe-N-C single-atom catalyst achieves excellent ORR performance under acidic condition and affords a significantly enhanced current density and power density in PEMFC.Our findings may open new opportunities for the rational design of FeN-C catalysts through multiscale structural engineering.
基金supported financially by the National Natural Science Foundation of China,China(Grant No.51702180,51572136,91963113,21703116,51372127,51873096)The Scientific and Technical Development Project of Qingdao,China(Grant No.18-2-2-52-jch)+1 种基金The Taishan Scholar Advantage and Characteristic Discipline Team of Eco Chemical Process and TechnologyThe Natural Science Foundation of Hebei Province(B2019204009)。
文摘Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.
基金supported by the National Natural Science Foundation of China (Nos. U1804255 and 51872076)the Program for Innovative Research Team of Henan Scientific Committee (No. CXTD2014033)+1 种基金the Project of Central Plains Science and Technology Innovation Leading Talents,Henan Province(No. 194200510001)the Scientific and Technological Research Project,Henan province (No. 212102210651)。
文摘Designing highly efficient non-precious based electrocatalysts for oxygen reduction reaction(ORR) is of significance for the rapid development of metal-air batteries.Herein,a hydrothermal-pyrolysis method is employed to fabricate Fe,N co-doped porous carbon materials as effective ORR electrocatalyst through adopting graphitic carbon nitride(g-C_(3)N_(4)) as both the self-sacrificial templates and N sources.The gC_(3)N_(4)provides a high concentration of unsaturated pyridine-type N to coordinate with iron to form Fe-N active sites.Through adjusting the Fe doping amounts,it is proved that appropriate Fe doping content is conducive to the construction of abundant defects and active sites of Fe-N.The as-prepared catalyst exhibits superior electrocatalytic ORR performance in alkaline media with half-wave potential(E_(1/2)=0.82 V) and onset potential(E_(onset)=0.95 V),equivalent to the commercial Pt/C catalyst.Moreover,there is almost no activity loss after 10 k continuous cyclic voltammetry cycles and methanol tolerance,indicating the excellent durability and superior methanol tolerance.Remarkably,when assembled as the cathode in a Zn-air battery,the device displays a power density of 99 mW/cm^(2),an open-circuit potential of 1.48 V and long-term discharge-charge cycling stability,indicating the promising potential to substitute the Pt catalyst for practical application.
文摘研制高活性的Fe/N/C氧还原催化剂对于降低燃料电池成本、实现商业化应用有重要意义.为实现Fe/N/C催化剂的理性设计,需要深入研究其活性位结构.本文发展一种研究活性位结构的新策略,以预先合成好的聚间苯二胺基Fe/N/C催化剂(Pm PDA-Fe Nx/C)为起始物,对其在1000~1500 o C高温下再次进行热处理并使其失活,通过关联催化剂热处理前后的结构变化与氧还原催化性能来揭示活性位结构.实验结果表明,随着热处理温度升高,活性中心结构被破坏,铁原子析出团聚并形成纳米颗粒,氮元素挥发损失,导致催化剂失活.XPS分析显示,低结合能含氮物种的含量与催化剂的ORR活性呈良好的正相关性,表明活性中心很可能是由吡啶N和Fe-N物种构成的.
文摘A novel coordination polymer, [Fe(C 5H 4NCOO) 2] n, was synthesized by hydrothermal reaction and characterized by elemental analysis as well as IR spectroscopy. The crystal structure (with a novel 3-D network) of this compound belongs to monoclinic, space group P2 1/n, a=0.49544(1) nm, b=1.32443(2) nm, c=1.04983(1) nm, β=101.586(1)°. The diffuse reflectance spectra (200～2500 nm) showed that the polymer had strong absorbance in 375～563 nm (E g≈2.5 eV) region and weak absorbance from 720 to 2500 nm (near infrared spectra).
