The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operatin...The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operating in a single medium.To ensure the reliable and stable completion of tasks by AAVs,this paper proposes a tiltable quadcopter AAV to mitigate the potential issue of rotor failure,which can lead to high-speed spinning or damage during cross-media transitions.Experimental validation demonstrates that this tiltable quadcopter AAV can transform into a dual-rotor or triple-rotor configuration after losing one or two rotors,allowing it to perform cross-domain movements with enhanced stability and maintain task completion.This enhancement significantly improves its fault tolerance and task reliability.展开更多
The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of th...The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.展开更多
This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify...This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify collision-free trajectory generation and fault-tolerant control.To deal with the fault-induced force imbalances,the Riemannian metric is proposed to coordinate nominal controllers and the global one.Then,Riemannianbased trajectory length optimization is solved by gradient's dynamic model-heat flow PDE,under which a feasible trajectory satisfying motion constraints is achieved to guide the faulty system.Such virtual control force emerges autonomously through this metric adjustments.Further,the tracking error is rigorously proven to be exponential boundedness.Simulation results confirm the validity of these theoretical findings.展开更多
Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate...Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.展开更多
The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may ...The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.展开更多
Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in ...Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in harsh environments,where critical components such as windings and permanent magnets(PMs)are susceptible to failures.These faults can lead to a significant degradation in performance,posing substantial challenges to the reliable operation of PMSMs.This paper presents a comprehensive review of common fault types in PMSMs,along with their corresponding fault diagnosis and fault-tolerant control strategies.The underlying mechanisms of typical faults are systematically analyzed,followed by a detailed comparison of various diagnostic and fault-tolerant control methods to evaluate their respective advantages and limitations.Finally,the review concludes by identifying key research gaps in PMSM fault diagnosis and fault-tolerant control,while proposing potential future directions for advancing this field.展开更多
Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,th...Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,the presence of a DC offset in the measured current can disrupt the regulation of grid currents and significantly degrade system performance.In this work,a fault-tolerant control approach is introduced to counteract the impact of such offset faults through a dedicated current compensation mechanism.The proposed solution is built around two main stages:(i)detecting and isolating DC offset faults that may appear in one or multiple phases of the measured grid currents,and(ii)estimating the fault magnitude and reconstructing the corrected current signal.The offset magnitude is obtained analytically by examining the grid current projected onto the synchronous d-axis at the grid angular frequency,eliminating the need for any additional sensing hardware.Simulation and experimental investigations conducted under several fault scenarios confirm the robustness of the proposed strategy and highlight significant improvements in detection speed and diagnostic accuracy.展开更多
Fault tolerance is essential for reliable and sustainable smart city infrastructure.Interconnected IoT systems must function under frequent faults,limited resources,and complex conditions.Existing research covers vari...Fault tolerance is essential for reliable and sustainable smart city infrastructure.Interconnected IoT systems must function under frequent faults,limited resources,and complex conditions.Existing research covers various fault-tolerant methods.However,current reviews often lack system-level critique and multidimensional analysis.This study provides a structured review of fault tolerance strategies across layered IoT architectures in smart cities.It evaluates fault detection,containment,and recovery techniques using specific metrics.These include fault visibility,propagation depth,containment score,and energy-resilience trade-offs.The analysis uses comparative tables,architecture-aware discussions,and conceptual plots.It investigates the impact of fault tolerance on decision-making in Supervisory Control And Data Acquisition(SCADA)systems,sensor networks,and real-time controllers.Simulation results and logic-based design support the relationships between evaluation metrics.Findings show a common reliance on redundancy and reactive methods.Many techniques fail to address cross-layer propagation,context-aware adaptation,and silent fault impact on user trust.The study combines these overlooked aspects into a system-level framework.This survey identifies performance bottlenecks and supports the design of adaptive,energy-efficient,and transparent IoT systems.The results contribute to bridging technical reliability with public trust,supporting scalable and responsible smart city development.展开更多
In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is co...In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is constructed by fusing the system state and the reference trajectory, which aims to transform the optimal fault-tolerant tracking control design with actuator faults into the optimal regulation problem of the conventional nonlinear error system. Subsequently, in order to ensure the normal execution of the online learning algorithm, a stability criterion condition is created to obtain an initial admissible tracking policy. Then, the constructed model neural network(NN) is pretrained to recognize the system dynamics and calculate trajectory control. The critic and action NNs are constructed to output the approximate cost function and approximate tracking control,respectively. The Hamilton-Jacobi-Bellman equation of the error system is solved online through the action-critic framework. In theoretical analysis, it is proved that all concerned signals are uniformly ultimately bounded according to the Lyapunov principle.The tracking control law can approach the optimal tracking control within a finite approximation error. Finally, two experimental examples are conducted to indicate the effectiveness and superiority of the developed fault-tolerant tracking control scheme.展开更多
This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challen...This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challenges inherent in conventional neural network training,an improved self-organizing radial basis function neural network(SRBFNN)with an input-dependent variable structure is developed.Furthermore,a novel selforganizing RBFNN-based observer is introduced to estimate system states across all dimensions.Leveraging the reconstructed states,the proposed adaptive controller effectively compensates for all uncertainties,including estimation errors in the observer,ensuring accurate state tracking with reduced control effort.The uniform ultimate boundedness of all closed-loop signals and tracking errors is rigorously established via Lyapunov stability analysis.Finally,simulations on two different nonlinear systems comprehensively validate the effectiveness and superiority of the proposed control approach.展开更多
The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes th...The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes the sensor prone to failure.Sensor failure has the potential to compromise aircraft safety.In order to improve the safety of the aircraft braking system,a fault detection and fault-tolerant control(FDFTC)strategy for the aircraft brake pressure sensor is designed.Firstly,a model based on a bidirectional long short-term memory(Bi-LSTM)network is constructed to estimate the brake pressure.Then,the residual sequence is obtained by comparing the measured pressure with the estimated pressure.On this basis,the improved sequential probability ratio test(SPRT)method based on mathematical statistics is applied to analyze the residual sequence to detect the fault.Finally,simulation and hardware-in-the-loop(HIL)testing results indicate that the proposed FDFTC strategy can detect sensor faults in time and efficiently complete braking when faults occur.Hence,the proposed FDFTC strategy can effectively deal with the faults of the aircraft brake pressure sensor,which is of great significance to improve the reliability and safety of the aircraft.展开更多
This paper is devoted to adaptive attitude tracking control for rigid spacecraft in the presence of parametric uncertainties, actuator faults and external disturbance. Specifically, a dynamic model is established base...This paper is devoted to adaptive attitude tracking control for rigid spacecraft in the presence of parametric uncertainties, actuator faults and external disturbance. Specifically, a dynamic model is established based on one-tank spacecraft, which explicitly takes into account changing Center of Mass(CM). Then, a control scheme is proposed to achieve attitude tracking.Benefiting from explicitly considering the changing CM during the controller design process, the proposed scheme possesses good robustness to parametric uncertainties with less fuel consumption.Moreover, a fault-tolerant control algorithm is proposed to accommodate actuator faults with no need of knowing the actuators' fault information. Lyapunov-based analysis is provided and the closed-loop system stability is rigorously proved. Finally, numerical simulations are presented to illustrate the effectiveness of the proposed controllers.展开更多
This paper presents the recent developments in Fault-Tolerant Cooperative Control(FTCC)of multiple unmanned aerial vehicles(multi-UAVs).To facilitate the analyses of FTCC methods for multi-UAVs.the formation control s...This paper presents the recent developments in Fault-Tolerant Cooperative Control(FTCC)of multiple unmanned aerial vehicles(multi-UAVs).To facilitate the analyses of FTCC methods for multi-UAVs.the formation control strategies under fault-free flight conditions of multi-UAVs are first summarized and analyzed,including the leader-following,behavior-based,virtual structure,collision avoidance,algebraic graph-based,and close formation control methods,which are viewed as the cooperative control methods for multi-UAVs at the pre-fault stage.Then,by considering the various faults encountered by the multi-UAVs,the state-of-the-art developments on individual,leader-following,and distributed FTCC schemes for multi-UAVs are reviewed in detail.Finally,conclusions and challenging issues towards future developments are presented.展开更多
A kind of networked control system with network-induced delay and packet dropout, modeled on asynchronous dynamical systems was tested, and the integrity design of the networked control system with sensors failures an...A kind of networked control system with network-induced delay and packet dropout, modeled on asynchronous dynamical systems was tested, and the integrity design of the networked control system with sensors failures and actuators failures was analyzed using hybrid systems technique based on the robust fault-tolerant control theory. The parametric expression of controller is given based on the feasible solution of linear matrix inequality. The simulation results are provided on the basis of detailed theoretical analysis, which further demonstrate the validity of the proposed schema.展开更多
This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation.For the proposed aircraft, comp...This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation.For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured Hinfinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control（MRAC） method, even with serious actuator saturation.展开更多
This paper studies time-varying fault-tolerant formation tracking problems for the multiple cruise missile system under directed topologies subjected to actuator failures. Firstly, the timevarying fault-tolerant forma...This paper studies time-varying fault-tolerant formation tracking problems for the multiple cruise missile system under directed topologies subjected to actuator failures. Firstly, the timevarying fault-tolerant formation tracking process for the multiple cruise missile system is divided into the guidance loop and the control loop. Then protocols are constructed to accomplish distributed fault-tolerant formation tracking in the guidance loop with the adaptive updating mechanism, in the condition where neither the knowledge about actuator malfunctions nor any global information of the communication topology remains available. Moreover, sufficient conditions to accomplish formation tracking are presented, and it is shown that the multiple cruise missile system can carry on the predefined time-varying fault-tolerant control (FTC) formation tracking through the active disturbances rejection controller (ADRC) and the proportion integration (PI) controller by the way of the fault-tolerant protocol utilizing the designed strategies, in the event of actuator failures. At last, numerical analysis and simulation are designed to verify the theoretical results.展开更多
Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor fault...Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor faults occur. But there is scarcely any research focusing on fault diagnosis and fault-tolerant control of Hall sensor used in PMSM. From this standpoint, the Hall sensor faults which may occur during the PMSM operating are theoretically analyzed. According to the analysis results, the fault diagnosis algorithm of Hall sensor, which is based on three rules, is proposed to classify the fault phenomena accurately. The rotor phase estimation algorithms, based on one or two Hall sensor(s), are initialized to engender the fault-tolerant control algorithm. The fault diagnosis algorithm can detect 60 Hall fault phenomena in total as well as all detections can be fulfilled in 1/138 rotor rotation period. The fault-tolerant control algorithm can achieve a smooth torque production which means the same control effect as normal control mode (with three Hall sensors). Finally, the PMSM bench test verifies the accuracy and rapidity of fault diagnosis and fault-tolerant control strategies. The fault diagnosis algorithm can detect all Hall sensor faults promptly and fault-tolerant control algorithm allows the PMSM to face failure conditions of one or two Hall sensor(s). In addition, the transitions between health-control and fault-tolerant control conditions are smooth without any additional noise and harshness. Proposed algorithms can deal with the Hall sensor faults of PMSM in real applications, and can be provided to realize the fault diagnosis and fault-tolerant control of PMSM.展开更多
In this paper,the satellite attitude control system subject to parametric perturbations,external disturbances,time-varying input delays,actuator faults and saturation is studied.In order to make the controller archite...In this paper,the satellite attitude control system subject to parametric perturbations,external disturbances,time-varying input delays,actuator faults and saturation is studied.In order to make the controller architecture simple and practical,the closed-loop system is transformed into a disturbance-free nominal system and an equivalent disturbance firstly.The equivalent disturbance represents all above uncertainties and actuator failures of the original system.Then a robust controller is proposed in a simple composition consisting of a nominal controller and a robust compensator.The nominal controller is designed for the transformed nominal system.The robust compensator is developed from a second-order filter to restrict the influence of the equivalent disturbance.Stability analysis indicates that both attitude tracking errors and compensator states can converge into the given neighborhood of the origin in finite time.To verify the effectiveness of the proposed control law,numerical simulations are carried out in different cases.Presented results demonstrate that the high-precision attitude tracking control can be achieved by the proposed fault-tolerant control law.Furthermore,multiple system performances including the control accuracy and energy consumption index are fully discussed under a series of compensator parameters.展开更多
Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes w...Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller (ILRGCC). A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities (LMIs), and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.展开更多
Implementing a control system over a communication network induces inevitable time delays that may degrade performance and even cause instability. One of the most effective ways to reduce the negative effect of delays...Implementing a control system over a communication network induces inevitable time delays that may degrade performance and even cause instability. One of the most effective ways to reduce the negative effect of delays on the performance of networked control system (NCS) is to reduce network traffic. In this paper, adjustable deadbands are explored as a solution to reduce network traffic in NCS. A method of fault-tolerant control of networked control system is presented, which takes into account system response as well as network traffic. The integrity design for a kind of NCS with sensor failures and actuator failures is analyzed based on robust fault-tolerant control theory and information scheduling. After detailed theoretical analysis, the paper also provides the simulation results, which further validate the proposed scheme.展开更多
基金supported by Southern Marine Science and Engineering Guangdong Laboratory Grant No.SML2023SP229。
文摘The cross-domain capabilities of aerial-aquatic vehicles(AAVs)hold significant potential for future airsea integrated combat operations.However,the failure rate of AAVs is higher than that of unmanned systems operating in a single medium.To ensure the reliable and stable completion of tasks by AAVs,this paper proposes a tiltable quadcopter AAV to mitigate the potential issue of rotor failure,which can lead to high-speed spinning or damage during cross-media transitions.Experimental validation demonstrates that this tiltable quadcopter AAV can transform into a dual-rotor or triple-rotor configuration after losing one or two rotors,allowing it to perform cross-domain movements with enhanced stability and maintain task completion.This enhancement significantly improves its fault tolerance and task reliability.
基金Supported by the National Key R&D Program of China(2021YFB2011300)the National Natural Science Foundation of China(52275044,52205299)+1 种基金the Zhejiang Provincial Natural Science Foundation of China(Z23E050032)the China Postdoctoral Science Foundation(2022M710304).
文摘The operating environment of the diesel engine air path system is complex and may be affected by external random disturbances.Potentially leading to faults.This paper addresses the fault-tolerant control problem of the diesel engine air path system,assuming that the system may simultaneously be affected by actuator faults and external random disturbances,a disturbance observer-based sliding mode controller is designed.Through the linear matrix inequality technique for solving observer and controller gains,optimal gain matrices can be obtained,eliminating the manual adjustment process of controller parameters and reducing the chattering phenomenon of the sliding mode surface.Finally,the effectiveness of the proposed method is verified through simulation analysis.
基金supported in part by the National Natural Science Foundation of China under Grant 62303144,62020106003,U22A2044in part by the Zhejiang Provincial Natural Science Foundation of China under Grant LQ23F030013.
文摘This paper investigates the issue of fault-tolerant control for swarm systems subject to switched graphs,actuator faults and obstacles.A geometric-based partial differential equation(PDE)framework is proposed to unify collision-free trajectory generation and fault-tolerant control.To deal with the fault-induced force imbalances,the Riemannian metric is proposed to coordinate nominal controllers and the global one.Then,Riemannianbased trajectory length optimization is solved by gradient's dynamic model-heat flow PDE,under which a feasible trajectory satisfying motion constraints is achieved to guide the faulty system.Such virtual control force emerges autonomously through this metric adjustments.Further,the tracking error is rigorously proven to be exponential boundedness.Simulation results confirm the validity of these theoretical findings.
基金supported by Nguyen Tat Thanh University,Ho Chi Minh City,Vietnam,provided with the facilities required to carry out this work.
文摘Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.
基金supported in part by the National Natural Science Foundation of China under Grants 61991404,62103093 and 62473089the Research Program of the Liaoning Liaohe Laboratory,China under Grant LLL23ZZ-05-01+5 种基金the Key Research and Development Program of Liaoning Province of China under Grant 2023JH26/10200011the 111 Project 2.0 of China under Grant B08015,the National Key Research and Development Program of China under Grant 2022YFB3305905the Xingliao Talent Program of Liaoning Province of China under Grant XLYC2203130the Natural Science Foundation of Liaoning Province of China under Grants 2024JH3/10200012 and 2023-MS-087the Open Research Project of the State Key Laboratory of Industrial Control Technology of China under Grant ICT2024B12the Fundamental Research Funds for the Central Universities of China under Grants N2108003 and N2424004.
文摘The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.
基金supported by National Natural Science Foundation of China under Project 52437003 and 52421004in part by the National Key R&D Program of China under Project 2023YFB3406000in part by Heilongjiang Provincial Natural Science Foundation under Project YQ2022E029.
文摘Permanent-magnet synchronous machines(PMSMs)are widely used in robotics,rail transportation,and electric vehicles owing to their high power density,high efficiency,and high power factor.However,PMSMs often operate in harsh environments,where critical components such as windings and permanent magnets(PMs)are susceptible to failures.These faults can lead to a significant degradation in performance,posing substantial challenges to the reliable operation of PMSMs.This paper presents a comprehensive review of common fault types in PMSMs,along with their corresponding fault diagnosis and fault-tolerant control strategies.The underlying mechanisms of typical faults are systematically analyzed,followed by a detailed comparison of various diagnostic and fault-tolerant control methods to evaluate their respective advantages and limitations.Finally,the review concludes by identifying key research gaps in PMSM fault diagnosis and fault-tolerant control,while proposing potential future directions for advancing this field.
文摘Three-phase grid-connected inverters(GCIs)are essential components in distributed generation systems,where the accuracy of current measurement circuits is fundamental for reliable closed-loop operation.Nevertheless,the presence of a DC offset in the measured current can disrupt the regulation of grid currents and significantly degrade system performance.In this work,a fault-tolerant control approach is introduced to counteract the impact of such offset faults through a dedicated current compensation mechanism.The proposed solution is built around two main stages:(i)detecting and isolating DC offset faults that may appear in one or multiple phases of the measured grid currents,and(ii)estimating the fault magnitude and reconstructing the corrected current signal.The offset magnitude is obtained analytically by examining the grid current projected onto the synchronous d-axis at the grid angular frequency,eliminating the need for any additional sensing hardware.Simulation and experimental investigations conducted under several fault scenarios confirm the robustness of the proposed strategy and highlight significant improvements in detection speed and diagnostic accuracy.
文摘Fault tolerance is essential for reliable and sustainable smart city infrastructure.Interconnected IoT systems must function under frequent faults,limited resources,and complex conditions.Existing research covers various fault-tolerant methods.However,current reviews often lack system-level critique and multidimensional analysis.This study provides a structured review of fault tolerance strategies across layered IoT architectures in smart cities.It evaluates fault detection,containment,and recovery techniques using specific metrics.These include fault visibility,propagation depth,containment score,and energy-resilience trade-offs.The analysis uses comparative tables,architecture-aware discussions,and conceptual plots.It investigates the impact of fault tolerance on decision-making in Supervisory Control And Data Acquisition(SCADA)systems,sensor networks,and real-time controllers.Simulation results and logic-based design support the relationships between evaluation metrics.Findings show a common reliance on redundancy and reactive methods.Many techniques fail to address cross-layer propagation,context-aware adaptation,and silent fault impact on user trust.The study combines these overlooked aspects into a system-level framework.This survey identifies performance bottlenecks and supports the design of adaptive,energy-efficient,and transparent IoT systems.The results contribute to bridging technical reliability with public trust,supporting scalable and responsible smart city development.
基金supported in part by the National Natural Science Foundation of China(62222301,62373012,62473012,62021003)the National Science and Technology Major Project(2021ZD0112302,2021ZD0112301)the Beijing Natural Science Foundation(JQ19013)
文摘In this paper, a fault-tolerant-based online critic learning algorithm is developed to solve the optimal tracking control issue for nonaffine nonlinear systems with actuator faults.First, a novel augmented plant is constructed by fusing the system state and the reference trajectory, which aims to transform the optimal fault-tolerant tracking control design with actuator faults into the optimal regulation problem of the conventional nonlinear error system. Subsequently, in order to ensure the normal execution of the online learning algorithm, a stability criterion condition is created to obtain an initial admissible tracking policy. Then, the constructed model neural network(NN) is pretrained to recognize the system dynamics and calculate trajectory control. The critic and action NNs are constructed to output the approximate cost function and approximate tracking control,respectively. The Hamilton-Jacobi-Bellman equation of the error system is solved online through the action-critic framework. In theoretical analysis, it is proved that all concerned signals are uniformly ultimately bounded according to the Lyapunov principle.The tracking control law can approach the optimal tracking control within a finite approximation error. Finally, two experimental examples are conducted to indicate the effectiveness and superiority of the developed fault-tolerant tracking control scheme.
基金supported in part by the National Natural Science Foundation of China(62033008,62188101,62173343,62073339)the Natural Science Foundation of Shandong Province of China(ZR2024MF072,ZR2022ZD34)the Research Fund for the Taishan Scholar Project of Shandong Province of China.
文摘This article presents an adaptive fault-tolerant tracking control strategy for unknown affine nonlinear systems subject to actuator faults and external disturbances.To address the hyperparameter initialization challenges inherent in conventional neural network training,an improved self-organizing radial basis function neural network(SRBFNN)with an input-dependent variable structure is developed.Furthermore,a novel selforganizing RBFNN-based observer is introduced to estimate system states across all dimensions.Leveraging the reconstructed states,the proposed adaptive controller effectively compensates for all uncertainties,including estimation errors in the observer,ensuring accurate state tracking with reduced control effort.The uniform ultimate boundedness of all closed-loop signals and tracking errors is rigorously established via Lyapunov stability analysis.Finally,simulations on two different nonlinear systems comprehensively validate the effectiveness and superiority of the proposed control approach.
基金Supported by National Natural Science Foundation of China(Grant No.52205045)National Key Research and Development Program of China(Grant No.2021YFB2011300)+2 种基金Aeronautical Science Foundation of China(Grant No.2022Z029051001)Zhejiang Provincial Natural Science Foundation of China(Grant No.LZ24E050006)Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Nanjing University of Aeronautics and Astronautics)(Grant No.MCAS-E-0224G01).
文摘The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft.However,the braking system is often exposed to high temperatures and strong vibration working environments,which makes the sensor prone to failure.Sensor failure has the potential to compromise aircraft safety.In order to improve the safety of the aircraft braking system,a fault detection and fault-tolerant control(FDFTC)strategy for the aircraft brake pressure sensor is designed.Firstly,a model based on a bidirectional long short-term memory(Bi-LSTM)network is constructed to estimate the brake pressure.Then,the residual sequence is obtained by comparing the measured pressure with the estimated pressure.On this basis,the improved sequential probability ratio test(SPRT)method based on mathematical statistics is applied to analyze the residual sequence to detect the fault.Finally,simulation and hardware-in-the-loop(HIL)testing results indicate that the proposed FDFTC strategy can detect sensor faults in time and efficiently complete braking when faults occur.Hence,the proposed FDFTC strategy can effectively deal with the faults of the aircraft brake pressure sensor,which is of great significance to improve the reliability and safety of the aircraft.
基金supported partially by the National Natural Science Foundation of China(Nos.61522301,61633003)
文摘This paper is devoted to adaptive attitude tracking control for rigid spacecraft in the presence of parametric uncertainties, actuator faults and external disturbance. Specifically, a dynamic model is established based on one-tank spacecraft, which explicitly takes into account changing Center of Mass(CM). Then, a control scheme is proposed to achieve attitude tracking.Benefiting from explicitly considering the changing CM during the controller design process, the proposed scheme possesses good robustness to parametric uncertainties with less fuel consumption.Moreover, a fault-tolerant control algorithm is proposed to accommodate actuator faults with no need of knowing the actuators' fault information. Lyapunov-based analysis is provided and the closed-loop system stability is rigorously proved. Finally, numerical simulations are presented to illustrate the effectiveness of the proposed controllers.
基金supported in part by National Natural Science Foundation of China(Nos.61833013,62003162,62020106003,61873055)Natural Science Foundation of Jiangsu Province of China(No.BK20200416)+4 种基金China Postdoctoral Science Foundation(Nos.2020TQ0151,2020M681590)State Key Laboratory of Synthetical Automation for Process Industries,Northeastern University,Shenyang,China(No.2019-KF-23-05)111 ProjectChina(No.B20007)Natural Sciences and Engineering Research Council of Canada.
文摘This paper presents the recent developments in Fault-Tolerant Cooperative Control(FTCC)of multiple unmanned aerial vehicles(multi-UAVs).To facilitate the analyses of FTCC methods for multi-UAVs.the formation control strategies under fault-free flight conditions of multi-UAVs are first summarized and analyzed,including the leader-following,behavior-based,virtual structure,collision avoidance,algebraic graph-based,and close formation control methods,which are viewed as the cooperative control methods for multi-UAVs at the pre-fault stage.Then,by considering the various faults encountered by the multi-UAVs,the state-of-the-art developments on individual,leader-following,and distributed FTCC schemes for multi-UAVs are reviewed in detail.Finally,conclusions and challenging issues towards future developments are presented.
基金This project was supported by the National Natural Science Foundation of China (60274014)Doctor Foundation of China Education Ministry (20020487006).
文摘A kind of networked control system with network-induced delay and packet dropout, modeled on asynchronous dynamical systems was tested, and the integrity design of the networked control system with sensors failures and actuators failures was analyzed using hybrid systems technique based on the robust fault-tolerant control theory. The parametric expression of controller is given based on the feasible solution of linear matrix inequality. The simulation results are provided on the basis of detailed theoretical analysis, which further demonstrate the validity of the proposed schema.
文摘This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation.For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured Hinfinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control（MRAC） method, even with serious actuator saturation.
基金supported by the Natural Science Foundation of China(61101004 61803014)
文摘This paper studies time-varying fault-tolerant formation tracking problems for the multiple cruise missile system under directed topologies subjected to actuator failures. Firstly, the timevarying fault-tolerant formation tracking process for the multiple cruise missile system is divided into the guidance loop and the control loop. Then protocols are constructed to accomplish distributed fault-tolerant formation tracking in the guidance loop with the adaptive updating mechanism, in the condition where neither the knowledge about actuator malfunctions nor any global information of the communication topology remains available. Moreover, sufficient conditions to accomplish formation tracking are presented, and it is shown that the multiple cruise missile system can carry on the predefined time-varying fault-tolerant control (FTC) formation tracking through the active disturbances rejection controller (ADRC) and the proportion integration (PI) controller by the way of the fault-tolerant protocol utilizing the designed strategies, in the event of actuator failures. At last, numerical analysis and simulation are designed to verify the theoretical results.
基金supported by National Natural Science Foundation of China(Grant No. 51275264)National Hi-tech Research and Development Program of China(863 Program, Grant No. 2011AA11A269)
文摘Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor faults occur. But there is scarcely any research focusing on fault diagnosis and fault-tolerant control of Hall sensor used in PMSM. From this standpoint, the Hall sensor faults which may occur during the PMSM operating are theoretically analyzed. According to the analysis results, the fault diagnosis algorithm of Hall sensor, which is based on three rules, is proposed to classify the fault phenomena accurately. The rotor phase estimation algorithms, based on one or two Hall sensor(s), are initialized to engender the fault-tolerant control algorithm. The fault diagnosis algorithm can detect 60 Hall fault phenomena in total as well as all detections can be fulfilled in 1/138 rotor rotation period. The fault-tolerant control algorithm can achieve a smooth torque production which means the same control effect as normal control mode (with three Hall sensors). Finally, the PMSM bench test verifies the accuracy and rapidity of fault diagnosis and fault-tolerant control strategies. The fault diagnosis algorithm can detect all Hall sensor faults promptly and fault-tolerant control algorithm allows the PMSM to face failure conditions of one or two Hall sensor(s). In addition, the transitions between health-control and fault-tolerant control conditions are smooth without any additional noise and harshness. Proposed algorithms can deal with the Hall sensor faults of PMSM in real applications, and can be provided to realize the fault diagnosis and fault-tolerant control of PMSM.
基金supported by the APSCO(Asia-Pacific Space Cooperation Organization)Student Small Satellite(SSS)Project(Microsatellite SSS-1,No.APSCO/ET&DM/SSS/IMP_C_001)。
文摘In this paper,the satellite attitude control system subject to parametric perturbations,external disturbances,time-varying input delays,actuator faults and saturation is studied.In order to make the controller architecture simple and practical,the closed-loop system is transformed into a disturbance-free nominal system and an equivalent disturbance firstly.The equivalent disturbance represents all above uncertainties and actuator failures of the original system.Then a robust controller is proposed in a simple composition consisting of a nominal controller and a robust compensator.The nominal controller is designed for the transformed nominal system.The robust compensator is developed from a second-order filter to restrict the influence of the equivalent disturbance.Stability analysis indicates that both attitude tracking errors and compensator states can converge into the given neighborhood of the origin in finite time.To verify the effectiveness of the proposed control law,numerical simulations are carried out in different cases.Presented results demonstrate that the high-precision attitude tracking control can be achieved by the proposed fault-tolerant control law.Furthermore,multiple system performances including the control accuracy and energy consumption index are fully discussed under a series of compensator parameters.
基金Supported in part by NSFC/RGC joint Research Scheme （N-HKUST639/09）, the National Natural Science Foundation of China （61104058, 61273101）, Guangzhou Scientific and Technological Project （2012J5100032）, Nansha district independent innovation project （201103003）, China Postdoctoral Science Foundation （2012M511367, 2012M511368）, and Doctor Scientific Research Foundation of Liaoning Province （20121046）.
文摘Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller (ILRGCC). A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities (LMIs), and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.
基金Supported by National Natural Science Foundation of P. R. China (60274014)the Specialized Research Fund for Doctoral Program of Higher Education of P. R. China (20020487006)
文摘Implementing a control system over a communication network induces inevitable time delays that may degrade performance and even cause instability. One of the most effective ways to reduce the negative effect of delays on the performance of networked control system (NCS) is to reduce network traffic. In this paper, adjustable deadbands are explored as a solution to reduce network traffic in NCS. A method of fault-tolerant control of networked control system is presented, which takes into account system response as well as network traffic. The integrity design for a kind of NCS with sensor failures and actuator failures is analyzed based on robust fault-tolerant control theory and information scheduling. After detailed theoretical analysis, the paper also provides the simulation results, which further validate the proposed scheme.
