In view of the structure and action behavior of mechatronic systems,a method of searching fault propagation paths called maximum-probability path search(MPPS)is proposed,aiming to determine all possible failure propag...In view of the structure and action behavior of mechatronic systems,a method of searching fault propagation paths called maximum-probability path search(MPPS)is proposed,aiming to determine all possible failure propagation paths with their lengths if faults occur.First,the physical structure system,function behavior,and complex network theory are integrated to define a system structural-action network(SSAN).Second,based on the concept of SSAN,two properties of nodes and edges,i.e.,the topological property and reliability property,are combined to define the failure propagation property.Third,the proposed MPPS model provides all fault propagation paths and possible failure rates of nodes on these paths.Finally,numerical experiments have been implemented to show the accuracy and advancement compared with the methods of Function Space Iteration(FSI)and the algorithm of Ant Colony Optimization(ACO).展开更多
The interconnection of urban critical infrastructure poses new challenges to the secure operation of power grid‐centric urban lifeline systems.The interdependencies among infrastructure systems increase the risk of c...The interconnection of urban critical infrastructure poses new challenges to the secure operation of power grid‐centric urban lifeline systems.The interdependencies among infrastructure systems increase the risk of cascading fault propagation,thereby threatening urban public safety.Coupling modelling and fault propagation simulation of urban lifeline systems provide a foundation for analysing disaster evolution mechanisms and support research on resilience assessment and enhancement technologies.In this paper,a coupling modelling and simulation method for urban lifeline systems under extreme disaster scenarios is proposed.First,based on fault propagation analysis requirements,the basic principles for coupling modelling are established,and simulation models suitable for lifeline systems under different time scales are analysed.Second,a co-simulation method combining time-driven and event-driven mechanisms is designed.Customised interfaces for information exchange between systems are developed based on mature simulation software,enabling the simulation of the disaster impact propagation process.Finally,the effectiveness of the proposed method is verified using a constructed urban lifeline coupling test system.展开更多
Based on high-resolution remote sensing image interpretation, digital elevation model 3-D analysis, field geologic field investigation, trenching engineering, and ground-penetrating radar, synthetic research on the ev...Based on high-resolution remote sensing image interpretation, digital elevation model 3-D analysis, field geologic field investigation, trenching engineering, and ground-penetrating radar, synthetic research on the evolution of the Yuguang Basin South Margin Fault （YBSMF） in northwest Beijing was carried out. We found that the propagation and growth of faults most often occurred often at two locations： the fault overlapping zone and the uneven or rough fault segment. Through detailed observation and analysis of all cropouts of faults along the YBSMF from zone a to zone i, we identified three major factors that dominate or affect fault propagation and growth. First, the irregularity of fault geometry determine the propagation and growth of the fault, and therefore, the faults always propagate and grow at such irregular fault segments. The fault finally cuts off and eliminates its irregularity, making the fault geometry and fault plane smoother than before, which contributes to the slipping movement of the half-graben block in the basin. Second, the scale of the irregularity of the fault geometry affects the result of fault propagation and growth, that is, the degree of the cutting off of fault irregularity. The degree of cutting off decreases as irregularity scale increases. Third, the maximum possible slip displacement of the fault segment influences the duration of fault propagation and growth. The duration at the central segments with a large slip displacement is longer than that at the end segments with a smaller slippage value.展开更多
Computational complexity of complex system multiple fault diagnosis is a puzzle at all times. Based on the well known Mozetic＇s approach, a novel hierarchical model-based diagnosis methodology is put forward for impr...Computational complexity of complex system multiple fault diagnosis is a puzzle at all times. Based on the well known Mozetic＇s approach, a novel hierarchical model-based diagnosis methodology is put forward for improving efficency of multi-fault recognition and localization. Structural abstraction and weighted fault propagation graphs are combined to build diagnosis model. The graphs have weighted arcs with fault propagation probabilities and propagation strength. For solving the problem of coupled faults, two diagnosis strategies are used： one is the Lagrangian relaxation and the primal heuristic algorithms; another is the method of propagation strength. Finally, an applied example shows the applicability of the approach and experimental results are given to show the superiority of the presented technique.展开更多
This paper has proposed a fault detecting method for DC supplied permanent magnet synchronize motor(PMSM)drive systems by monitoring the drive DC input current.This method is based on the fault signal propagation from...This paper has proposed a fault detecting method for DC supplied permanent magnet synchronize motor(PMSM)drive systems by monitoring the drive DC input current.This method is based on the fault signal propagation from the torque disturbance on the motor shaft to the inverter input currents.The accuracy of this fault signal propagation is verified by the Matlab simulation and experiment tests with the emulated faulty conditions.The feasible of this approach is shown by the experimental test conducted by the Spectra test rig with the real gearbox fault.This detection scheme is also suitable for monitoring other drive components such as the power converter or the motor itself using only one set of current transducers mounted at the DC input side.展开更多
The Tunisian Dorsal backland is the Eastern Atlas side of maghrebides. Field data of Fahs area allowed us to develop new interpretations and to characterize the main structural features of the studied devices (Jebel R...The Tunisian Dorsal backland is the Eastern Atlas side of maghrebides. Field data of Fahs area allowed us to develop new interpretations and to characterize the main structural features of the studied devices (Jebel Rouas and Ruissate). Heritage of Zaghouan accident, Triassic salt movements and strike-direction of major synsedimentary faults are the principal causes and results of the skinned and superimposed geometric architecture, generated by the reversed extensional (Jurassic-Cretaceous) tectonics. The actual geometry of Jebel Rouas and Ruissate represents a fault propagation fold, affecting Jurassic and Cretaceous sets. The backland of this thrust fault defines an imbrications structures of Barremian series. Tectonic records activities show the existence of angular unconformities (Oligocene and Eocene series on the Cretaceous sets considered as bedrock), slumps, tectonic breccias and synsedimentary faults are all of them controlled by a deep major accident;N-S to NE-SW and NW-SE. Features of the study area are probably related first;to the blockage of Zaghouan thrust oriented NE-SW in the foreland;then, to the intense halokinetic activity, which facilitates the layers displacement acting as decollment level. The detailed structural and stratigraphic study of Fahs area and its neighbors shows the presence of an intense tangential tectonic during upper Miocene, affecting Meso-Cenozoic sets, because all the structures involved are sealed by Oligocene and Miocene thinned series. This is accentuated by the existence of different sets of decollment at different depths, which are represented by a displacement to the SE through the backland of the Tunisian Dorsal. We define these features as an imbrication and thrusting Out of sequence system.展开更多
The research area is situated in the western part of Tarim basin,which includes Awati depression and Bachu uplifted block. It underwent three times processes of compression in a large scale and a near term extension s...The research area is situated in the western part of Tarim basin,which includes Awati depression and Bachu uplifted block. It underwent three times processes of compression in a large scale and a near term extension since Cambrian. The first compression occurred during Middle Cambrian to Devonian, which formed fault band folds in NW axial direction. They were "under-water uplift"and distributed all over the research area. The second compression occurred in Late Permian and formed fault band folds and a few fault propagation folds in NS axial direction. They are developed near Tumuxiuke fault belt and the northern research area. The western anticline is bigger than the eastern one in extent and size. The third compression occurred during Palaeogene to Quaternary and formed tumuxiuke fault belt and fault propagation folds in NW direction. They are distributed over the south part of the research area. Tumuxiuke fault belt is a big scale dextral reversed strike-slip fault belt; it transformed or destroyed the fold structure of the research area. A short-term extension occurred during Early Permian. Tarim Basin is in the rift forming stage of craton, and there exist widespread basic volcanic rocks, basic intrusive bodies and dikes.展开更多
Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to id...Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.展开更多
Fault analysis is a frequently used side-channel attack for cryptanalysis.However,existing fault attack methods usually involve complex fault fusion analysis or computation-intensive statistical analysis of massive fa...Fault analysis is a frequently used side-channel attack for cryptanalysis.However,existing fault attack methods usually involve complex fault fusion analysis or computation-intensive statistical analysis of massive fault traces.In this work,we take a property-based formal verification approach to fault analysis.We derive fine-grained formal models for automatic fault propagation and fusion,which establish a mathematical foundation for precise measurement and formal reasoning of fault effects.We extract the correlations in fault effects in order to create properties for fault verification.We further propose a method for key recovery,by formally checking when the extracted properties can be satisfied with partial keys as the search variables.Experimental results using both unprotected and masked advanced encryption standard(AES)implementations show that our method has a key search complexity of 216,which only requires two correct and faulty ciphertext pairs to determine the secret key,and does not assume knowledge about fault location or pattern.展开更多
The early detection of cascading failure plays an important role in the safe and stable operation of the power system with high penetration of renewable energy.This paper proposes a fault propagation dynamic model bas...The early detection of cascading failure plays an important role in the safe and stable operation of the power system with high penetration of renewable energy.This paper proposes a fault propagation dynamic model based on the epidemic model,and further puts forward a method to detect the development of cascading failures.Through the simulation of the IEEE 39-bus and 118-bus systems,this model is proven to be valid and capable of providing practical technical support for the prevention of cascading failures in power systems with high penetration of renewable energy.This paper also provides an analysis method for the choice of different protection and control measures at each stage of cascading failure,which has critical significance and follow-up value.展开更多
基金Project(2017JBZ103)supported by the Fundamental Research Funds for the Central Universities,China
文摘In view of the structure and action behavior of mechatronic systems,a method of searching fault propagation paths called maximum-probability path search(MPPS)is proposed,aiming to determine all possible failure propagation paths with their lengths if faults occur.First,the physical structure system,function behavior,and complex network theory are integrated to define a system structural-action network(SSAN).Second,based on the concept of SSAN,two properties of nodes and edges,i.e.,the topological property and reliability property,are combined to define the failure propagation property.Third,the proposed MPPS model provides all fault propagation paths and possible failure rates of nodes on these paths.Finally,numerical experiments have been implemented to show the accuracy and advancement compared with the methods of Function Space Iteration(FSI)and the algorithm of Ant Colony Optimization(ACO).
基金supported by the National Key Research and Development Program of China,Grant:2022YFB2405500The Science and Technology Project of State Grid Corporation of China,Grant:52094023001HShanghai Electric Power Research Institute,State Grid Corporation of China,Grant:52094023003J.
文摘The interconnection of urban critical infrastructure poses new challenges to the secure operation of power grid‐centric urban lifeline systems.The interdependencies among infrastructure systems increase the risk of cascading fault propagation,thereby threatening urban public safety.Coupling modelling and fault propagation simulation of urban lifeline systems provide a foundation for analysing disaster evolution mechanisms and support research on resilience assessment and enhancement technologies.In this paper,a coupling modelling and simulation method for urban lifeline systems under extreme disaster scenarios is proposed.First,based on fault propagation analysis requirements,the basic principles for coupling modelling are established,and simulation models suitable for lifeline systems under different time scales are analysed.Second,a co-simulation method combining time-driven and event-driven mechanisms is designed.Customised interfaces for information exchange between systems are developed based on mature simulation software,enabling the simulation of the disaster impact propagation process.Finally,the effectiveness of the proposed method is verified using a constructed urban lifeline coupling test system.
基金financially supported by the Yuguang Basin 1:50000 Geological Mapping Project (no. 201210916),a subsubject of Active Fault Seismic Hazard Assessment Project of China's Key Area for Surveillance and Protection
文摘Based on high-resolution remote sensing image interpretation, digital elevation model 3-D analysis, field geologic field investigation, trenching engineering, and ground-penetrating radar, synthetic research on the evolution of the Yuguang Basin South Margin Fault （YBSMF） in northwest Beijing was carried out. We found that the propagation and growth of faults most often occurred often at two locations： the fault overlapping zone and the uneven or rough fault segment. Through detailed observation and analysis of all cropouts of faults along the YBSMF from zone a to zone i, we identified three major factors that dominate or affect fault propagation and growth. First, the irregularity of fault geometry determine the propagation and growth of the fault, and therefore, the faults always propagate and grow at such irregular fault segments. The fault finally cuts off and eliminates its irregularity, making the fault geometry and fault plane smoother than before, which contributes to the slipping movement of the half-graben block in the basin. Second, the scale of the irregularity of the fault geometry affects the result of fault propagation and growth, that is, the degree of the cutting off of fault irregularity. The degree of cutting off decreases as irregularity scale increases. Third, the maximum possible slip displacement of the fault segment influences the duration of fault propagation and growth. The duration at the central segments with a large slip displacement is longer than that at the end segments with a smaller slippage value.
文摘Computational complexity of complex system multiple fault diagnosis is a puzzle at all times. Based on the well known Mozetic＇s approach, a novel hierarchical model-based diagnosis methodology is put forward for improving efficency of multi-fault recognition and localization. Structural abstraction and weighted fault propagation graphs are combined to build diagnosis model. The graphs have weighted arcs with fault propagation probabilities and propagation strength. For solving the problem of coupled faults, two diagnosis strategies are used： one is the Lagrangian relaxation and the primal heuristic algorithms; another is the method of propagation strength. Finally, an applied example shows the applicability of the approach and experimental results are given to show the superiority of the presented technique.
基金This work is supported by the Ningbo Science and Technology Bureau,China under Grant 2014A35007 and 2013A31012.
文摘This paper has proposed a fault detecting method for DC supplied permanent magnet synchronize motor(PMSM)drive systems by monitoring the drive DC input current.This method is based on the fault signal propagation from the torque disturbance on the motor shaft to the inverter input currents.The accuracy of this fault signal propagation is verified by the Matlab simulation and experiment tests with the emulated faulty conditions.The feasible of this approach is shown by the experimental test conducted by the Spectra test rig with the real gearbox fault.This detection scheme is also suitable for monitoring other drive components such as the power converter or the motor itself using only one set of current transducers mounted at the DC input side.
文摘The Tunisian Dorsal backland is the Eastern Atlas side of maghrebides. Field data of Fahs area allowed us to develop new interpretations and to characterize the main structural features of the studied devices (Jebel Rouas and Ruissate). Heritage of Zaghouan accident, Triassic salt movements and strike-direction of major synsedimentary faults are the principal causes and results of the skinned and superimposed geometric architecture, generated by the reversed extensional (Jurassic-Cretaceous) tectonics. The actual geometry of Jebel Rouas and Ruissate represents a fault propagation fold, affecting Jurassic and Cretaceous sets. The backland of this thrust fault defines an imbrications structures of Barremian series. Tectonic records activities show the existence of angular unconformities (Oligocene and Eocene series on the Cretaceous sets considered as bedrock), slumps, tectonic breccias and synsedimentary faults are all of them controlled by a deep major accident;N-S to NE-SW and NW-SE. Features of the study area are probably related first;to the blockage of Zaghouan thrust oriented NE-SW in the foreland;then, to the intense halokinetic activity, which facilitates the layers displacement acting as decollment level. The detailed structural and stratigraphic study of Fahs area and its neighbors shows the presence of an intense tangential tectonic during upper Miocene, affecting Meso-Cenozoic sets, because all the structures involved are sealed by Oligocene and Miocene thinned series. This is accentuated by the existence of different sets of decollment at different depths, which are represented by a displacement to the SE through the backland of the Tunisian Dorsal. We define these features as an imbrication and thrusting Out of sequence system.
文摘The research area is situated in the western part of Tarim basin,which includes Awati depression and Bachu uplifted block. It underwent three times processes of compression in a large scale and a near term extension since Cambrian. The first compression occurred during Middle Cambrian to Devonian, which formed fault band folds in NW axial direction. They were "under-water uplift"and distributed all over the research area. The second compression occurred in Late Permian and formed fault band folds and a few fault propagation folds in NS axial direction. They are developed near Tumuxiuke fault belt and the northern research area. The western anticline is bigger than the eastern one in extent and size. The third compression occurred during Palaeogene to Quaternary and formed tumuxiuke fault belt and fault propagation folds in NW direction. They are distributed over the south part of the research area. Tumuxiuke fault belt is a big scale dextral reversed strike-slip fault belt; it transformed or destroyed the fold structure of the research area. A short-term extension occurred during Early Permian. Tarim Basin is in the rift forming stage of craton, and there exist widespread basic volcanic rocks, basic intrusive bodies and dikes.
文摘Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.
基金supported by the National Key R&D Program of China(No.2021YFB3100901)the National Natural Science Foundation of China(Nos.62074131 and 62004176).
文摘Fault analysis is a frequently used side-channel attack for cryptanalysis.However,existing fault attack methods usually involve complex fault fusion analysis or computation-intensive statistical analysis of massive fault traces.In this work,we take a property-based formal verification approach to fault analysis.We derive fine-grained formal models for automatic fault propagation and fusion,which establish a mathematical foundation for precise measurement and formal reasoning of fault effects.We extract the correlations in fault effects in order to create properties for fault verification.We further propose a method for key recovery,by formally checking when the extracted properties can be satisfied with partial keys as the search variables.Experimental results using both unprotected and masked advanced encryption standard(AES)implementations show that our method has a key search complexity of 216,which only requires two correct and faulty ciphertext pairs to determine the secret key,and does not assume knowledge about fault location or pattern.
基金supported by the National Natural Science Foundation of China under U22B6006。
文摘The early detection of cascading failure plays an important role in the safe and stable operation of the power system with high penetration of renewable energy.This paper proposes a fault propagation dynamic model based on the epidemic model,and further puts forward a method to detect the development of cascading failures.Through the simulation of the IEEE 39-bus and 118-bus systems,this model is proven to be valid and capable of providing practical technical support for the prevention of cascading failures in power systems with high penetration of renewable energy.This paper also provides an analysis method for the choice of different protection and control measures at each stage of cascading failure,which has critical significance and follow-up value.
