To address prediction errors and limited information extraction in machine learning(ML)-based interval prediction,a hybrid model was proposed for interval estimation and failure assessment of step-like landslides unde...To address prediction errors and limited information extraction in machine learning(ML)-based interval prediction,a hybrid model was proposed for interval estimation and failure assessment of step-like landslides under uncertainty.The model decomposed displacements into trend and periodic components via Variational Mode Decomposition(VMD)and K-shape clustering.The Residual and Moving Block Bootstrap methods were used to generate pseudo datasets.Polynomial regressionwas adopted for trend forecasting,whereas the Dense Convolutional Network(DenseNet)and Long Short-Term Memory(LSTM)networks were employed for periodic displacement prediction.An Extreme Learning Machine(ELM)was used to estimate the noise variance,enabling the construction of Prediction Intervals(PIs)and quantificationof displacement uncertainty.Failure probabilities(Pf)were derived from PIs using an improved tangential angle criterion and reliability analysis.The model was validated on three step-like landslides in the Three Gorges Reservoir Area,achieving stability assessment accuracies of 99.88%(XD01),99.93%(ZG93),99.89%(ZG118),and 100%for ZG110 and ZG111 across the Baishuihe and Bazimen landslides.For the Shuping landslide,the predictions aligned with fieldobservations before and after the 2014–2015 remediation,with P_(f)remaining near zero post-2015 except for occasional peaks.The model outperformed conventional ML approaches by yielding narrower PIs.At XD01 with 90%PI nominal confidencelevel(PINC),the coverage width-based criterion(CWC)and PI average width(PIAW)were 3.38 mm.The mean values of the PIs exhibited high accuracy,with a Mean Absolute Error(MAE)of 0.28 mm and Root Mean Square Error(RMSE)of 0.39 mm.These results demonstrate the robustness of the proposed model in improving landslide risk assessment and decision-making under uncertainty.展开更多
This study presents an innovative approach to calculating the failure probability of slopes by incorporating fuzzylimit-state functions,a method that significantly enhances the accuracy and efficiency of slope stabili...This study presents an innovative approach to calculating the failure probability of slopes by incorporating fuzzylimit-state functions,a method that significantly enhances the accuracy and efficiency of slope stability analysis.Unlike traditional probabilistic techniques,this approach utilizes a least squares support vector machine(LSSVM)optimized with a grey wolf optimizer(GWO)and K-fold cross-validation(CV)to approximate the limit-statefunction,thus reducing computational complexity.The novelty of this work lies in its application to one-dimensional(1D),two-dimensional(2D),and three-dimensional(3D)slope models,demonstrating its versatility andhigh precision.The proposed method consistently achieves error margins within 3%of Monte Carlo simulation(MCS)results,while substantially reducing computation time,particularly for 2D and 3D models.This makes theapproach highly practical for real-world engineering applications.Furthermore,by applying fuzzy mathematics tohandle uncertainties in geotechnical properties,the method offers a more realistic and comprehensive understandingof slope stability.As water is the main factor influencing the stability of slopes,this aspect is investigatedby calculating the phreatic line after the change in water level.Relevant examples are used to show that the failureprobability of a slope under water wading condition can increase by more than 20%(increase rates in 1D,2D and3D conditions being 25%,27%and 31%,respectively)compared with the natural condition.The influence ofdiverse fuzzy membership functions—linear,normal,and Cauchy—on failure probability is also considered.Thisresearch not only provides a strategy for better calculation of the slope failure probability but also pioneers theintegration of computational intelligence,fuzzy logic and fluid-dynamics in geotechnical engineering,presentingan innovative and efficient tool for slope stability analysis.展开更多
The R F first order second moment method will produce more error for calculating the reliability of welded engineering pipe structures when the failure function is seriously nonlinear and the random variables don...The R F first order second moment method will produce more error for calculating the reliability of welded engineering pipe structures when the failure function is seriously nonlinear and the random variables don′t serve as normal distribution. In order to increase the computing accuracy of reliability, an improved FOSM method is used for calculating the failure probability of welded pipes with flaws in this paper. Because of solving the problems of the linear expansion of failure function at the failure point and constructing equivalent normal variables, the new algorithm can greatly improve the calculating accuracy of probability of the welded pipes with cracks. The examples show that this method is simple, efficient and accurate for reliability safety assessment of the welded pipes with cracks. It can save more time than the Monte Carlo method does, so that the improved FOSM method is recommended for engineering reliability safety assessment of the welded pipes with flaws.展开更多
The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathe...The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathematical descriptions,namely,limit state functions of failure modes.Several problems are to be solved in the use of traditional methods for gravity dams.One is how to define the limit state function really reflecting the mechanical mechanism of the failure mode;another is how to understand the relationship among failure modes and enable the probability of the whole structure to be determined.Performing SFP analysis for a gravity dam system is a challenging task.This work proposes a novel nonlinear finite-element-based SFP analysis method for gravity dams.Firstly,reasonable nonlinear constitutive modes for dam concrete,concrete/rock interface and rock foundation are respectively introduced according to corresponding mechanical mechanisms.Meanwhile the response surface(RS) method is used to model limit state functions of main failure modes through the Monte Carlo(MC) simulation results of the dam-interface-foundation interaction finite element(FE) analysis.Secondly,a numerical SFP method is studied to compute the probabilities of several failure modes efficiently by simple matrix integration operations.Then,the nonlinear FE-based SFP analysis methodology for gravity dams considering correlated failure modes with the additional sensitivity analysis is proposed.Finally,a comprehensive computational platform for interfacing the proposed method with the open source FE code Code Aster is developed via a freely available MATLAB software tool(FERUM).This methodology is demonstrated by a case study of an existing gravity dam analysis,in which the dominant failure modes are identified,and the corresponding performance functions are established.Then,the dam failure probability of the structural system is obtained by the proposed method considering the correlation relationship of main failure modes on the basis of the mechanical mechanism analysis with the MC-FE simulations.展开更多
Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a l...Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a limited probabilistic basis on extreme load combinations.Additionally,the performance of engineering structures will be deteriorated by the aggressive environments during their service periods,such as chloride attack,concrete carbonation,and wind-induced fatigue.This study presents a probabilistic methodology to assess the time-dependent failure probability of RC bridges with chloride-induced corrosion under the multiple hazards of earthquakes and strong winds.The loss of cross-section area of reinforcements and the reduction in strength of reinforcing steel and concrete cover induced by the chloride attack are considered.Moreover,the Poisson model is employed to obtain the occurrence probabilities of the individual and concurrent earthquake and strong wind events.The convolution integral is used to determine the joint probability distribution of combined load effects under simultaneous earthquakes and strong winds.Numerical results indicate that the structural failure probability under multiple hazards increases significantly during the bridge′s life-cycle due to the chloride corrosion effect.The contribution of each hazard event on the total structural failure probability varies with time.Thus,neglecting the combined influences of multiple hazards and chloride-induced corrosion may bring erroneous predictions in failure probability estimates of RC bridges.展开更多
Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced acc...Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced according to numerical analysis theory. After complicated multi-independent variables implicit functional function was simplified to be a single independent variable implicit function and rule of calculating derivative for composite function was combined with principle of the mean deviations method, an approximative solution format of implicit functional function was established through Taylor expansion series and iterative solution approach of reliability degree index was given synchronously. An engineering example was analyzed by the method. The result shows its absolute error is only 0.78% as compared with accurate solution.展开更多
Historically,landslides have been the primary type of geological disaster worldwide.Generally,the stability of reservoir banks is primarily affected by rainfall and reservoir water level fluctuations.Moreover,the stab...Historically,landslides have been the primary type of geological disaster worldwide.Generally,the stability of reservoir banks is primarily affected by rainfall and reservoir water level fluctuations.Moreover,the stability of reservoir banks changes with the long-term dynamics of external disastercausing factors.Thus,assessing the time-varying reliability of reservoir landslides remains a challenge.In this paper,a machine learning(ML)based approach is proposed to analyze the long-term reliability of reservoir bank landslides in spatially variable soils through time series prediction.This study systematically investigated the prediction performances of three ML algorithms,i.e.multilayer perceptron(MLP),convolutional neural network(CNN),and long short-term memory(LSTM).Additionally,the effects of the data quantity and data ratio on the predictive power of deep learning models are considered.The results show that all three ML models can accurately depict the changes in the time-varying failure probability of reservoir landslides.The CNN model outperforms both the MLP and LSTM models in predicting the failure probability.Furthermore,selecting the right data ratio can improve the prediction accuracy of the failure probability obtained by ML models.展开更多
The uncertainties of some key influence factors on coal crushing,such as rock strength,pore pressure and magnitude and orientation of three principal stresses,can lead to the uncertainty of coal crushing and make it v...The uncertainties of some key influence factors on coal crushing,such as rock strength,pore pressure and magnitude and orientation of three principal stresses,can lead to the uncertainty of coal crushing and make it very difficult to predict coal crushing under the condition of in-situ reservoir.To account for the uncertainty involved in coal crushing,a deterministic prediction model of coal crushing under the condition of in-situ reservoir was established based on Hoek-Brown criterion.Through this model,key influence factors on coal crushing were selected as random variables and the corresponding probability density functions were determined by combining experiment data and Latin Hypercube method.Then,to analyze the uncertainty of coal crushing,the firstorder second-moment method and the presented model were combined to address the failure probability involved in coal crushing analysis.Using the presented method,the failure probabilities of coal crushing were analyzed for WS5-5 well in Ningwu basin,China,and the relations between failure probability and the influence factors were furthermore discussed.The results show that the failure probabilities of WS5-5 CBM well vary from 0.6 to 1.0; moreover,for the coal seam section at depth of 784.3-785 m,the failure probabilities are equal to 1,which fit well with experiment results; the failure probability of coal crushing presents nonlinear growth relationships with the increase of principal stress difference and the decrease of uniaxial compressive strength.展开更多
A general failure probability simulation and deviation evaluation methods were presented for fuzzy safety state and fuzzy failure state. And the corresponding number integral method was simultaneously established. As ...A general failure probability simulation and deviation evaluation methods were presented for fuzzy safety state and fuzzy failure state. And the corresponding number integral method was simultaneously established. As the distribution of state variable and the membership of the state variable to the fuzzy safety set were normal, the general failure probability of the single failure mode had precise analytic solution, which was used to verify the precision of the presented methods. The results show that the evaluation of the simulation method convergences to the analytic solution with the number increase of the sampling. The above methods for the single failure mode was extended to the multi-mode by the expansion and probability principles. The presented methods were applied to the engineering problem. For the number of significant mode is not too many, the high precision solution can be given by the presented number simulation and number integral methods, which is illustrated by the engineering examples. In addition, the application scope of the methods was discussed.展开更多
Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction ...Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction method based on conditional probability theory is proposed to solve the sensitivity analysis based on the approximate analytic method.The relevant concepts are introduced to characterize the correlation between failure modes by the reliability index and correlation coefficient,and conditional normal fractile the for the multi-dimensional conditional failure analysis is proposed based on the two-dimensional normal distribution function.Thus the calculation of system failure probability can be represented as a summation of conditional probability terms,which is convenient to be computed by iterative solving sequentially.Further the system sensitivity solution is transformed into the derivation process of the failure probability correlation coefficient of each failure mode.Numerical examples results show that it is feasible to apply the idea of failure mode relevancy to failure probability sensitivity analysis,and it can avoid multi-dimension integral calculation and reduce complexity and difficulty.Compared with the product of conditional marginalmethod,a wider value range of correlation coefficient for reliability analysis is confirmed and an acceptable accuracy can be obtained with less computational cost.展开更多
Methodology for the reliability analysis of hydraulic gravity dam is the key technology in current hydropower construction.Reliability analysis for the dynamical dam safety should be divided into two phases:failure mo...Methodology for the reliability analysis of hydraulic gravity dam is the key technology in current hydropower construction.Reliability analysis for the dynamical dam safety should be divided into two phases:failure mode identification and the calculation of the failure probability.Both of them are studied based on the mathematical statistics and structure reliability theory considering two kinds of uncertainty characters(earthquake variability and material randomness).Firstly,failure mode identification method is established based on the dynamical limit state system and verified through example of Koyna Dam so that the statistical law of progressive failure process in dam body are revealed; Secondly,for the calculation of the failure probability,mathematical model and formula are established according to the characteristics of gravity dam,which include three levels,that is element failure,path failure and system failure.A case study is presented to show the practical application of theoretical method and results of these methods.展开更多
A probabilistic model is proposed that uses observation data to estimate failure probabilities during excavations.The model integrates a Bayesian network and distanced-based Bayesian model updating.In the network,the ...A probabilistic model is proposed that uses observation data to estimate failure probabilities during excavations.The model integrates a Bayesian network and distanced-based Bayesian model updating.In the network,the movement of a retaining wall is selected as the indicator of failure,and the observed ground surface settlement is used to update the soil parameters.The responses of wall deflection and ground surface settlement are accurately predicted using finite element analysis.An artificial neural network is employed to construct the response surface relationship using the aforementioned input factors.The proposed model effectively estimates the uncertainty of influential factors.A case study of a braced excavation is presented to demonstrate the feasibility of the proposed approach.The update results facilitate accurate estimates according to the target value,from which the corresponding probabilities of failure are obtained.The proposed model enables failure probabilities to be determined with real-time result updating.展开更多
To analyze the effect of the region of the model inputs on the model output,a novel concept about contribution to the sample failure probability plot(CSFP) is proposed based on the contribution to the sample mean plot...To analyze the effect of the region of the model inputs on the model output,a novel concept about contribution to the sample failure probability plot(CSFP) is proposed based on the contribution to the sample mean plot(CSM) and the contribution to the sample variance plot(CSV).The CSFP can be used to analyze the effect of the region of the model inputs on the failure probability.After the definition of CSFP,its property and the differences between CSFP and CSV/CSM are discussed.The proposed CSFP can not only provide the information about which input affects the failure probability mostly,but also identify the contribution of the regions of the input to the failure probability mostly.By employing the Kriging model method on optimized sample points,a solution for CSFP is obtained.The computational cost for solving CSFP is greatly decreased because of the efficiency of Kriging surrogate model.Some examples are used to illustrate the validity of the proposed CSFP and the applicability and feasibility of the Kriging surrogate method based solution for CSFP.展开更多
Coal mining in groundwater-rich coal fields will trigger failure of overlying strata,resulting in the formation of water-conducting fracture zone(WCFZ)and potentially leading to water-inrush accidents.In this study,a ...Coal mining in groundwater-rich coal fields will trigger failure of overlying strata,resulting in the formation of water-conducting fracture zone(WCFZ)and potentially leading to water-inrush accidents.In this study,a reliability model with consideration of spatial variability and uncertainty of strength parameters was proposed to predict the failure behaviour of overlying strata during coal mining in groundwater-rich coalfields.Rock strength parameters,including cohesion,internal friction angle,uniaxial tensile strength,and softening coefficient,are treated as random variables to determine the rock failure uncertainty.The experimental results of these geomechanical parameters at different positions are interpolated by the Kriging interpolation method.Spatially,the interpolated values are arranged as the average value of each random variable to demonstrate their autocorrelation.Furthermore,based on Mohr–Coulomb yield criterion,a performance function is deduced to calculate the failure probabilities of overburden rocks to evaluate the spatial scale of WCFZ.As a typical case,the failure features of adjacent overlying strata of No.7121 mining face in Qidong Coal Mine is analyzed.The results show that the risks of water-inrush are high when the mining face advances to 260–380 m and 1120–1240 m,which aligns with both field monitoring results and borehole observation results.The proposed model holds significant implications for prevention of water-inrush accidents in groundwater-rich coal mines.展开更多
The zero_failure data research is a new field in the recent years, but it is required urgently in practical projects, so the work has more theory and practical values. In this paper, for zero_failure data (t i,n i...The zero_failure data research is a new field in the recent years, but it is required urgently in practical projects, so the work has more theory and practical values. In this paper, for zero_failure data (t i,n i) at moment t i , if the prior distribution of the failure probability p i=p{T【t i} is quasi_exponential distribution, the author gives the p i Bayesian estimation and hierarchical Bayesian estimation and the reliability under zero_failure date condition is also obtained.展开更多
The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the...The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability. This is a major advancement in bridge design specifications. However, LRFD is only calibrated for dead and live loads. In cases when extreme loads are significant, they need to be individually assessed. Combining regular loads with extreme loads has been a major challenge, mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure. To overcome these difficulties, this paper suggests a methodology of comprehensive reliability, by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant. Based on these conditions, the extreme loads （also referred to as multiple hazard or MH loads） can be broken down into single effects. In Part II of this paper, a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example. There are three major steps in establishing load factors from MH load distributions： （1） formulate the failure probabilities; （2） normalize various load distributions; and （3） establish design limit state equations. This paper describes the formulation of the failure probabilities of single and combined loads.展开更多
In the field of the system reliability analysis with multiple failure modes,the advances mainly involve only random uncertainty.The upper bound of the system failure probability with multiple failure modes is usually ...In the field of the system reliability analysis with multiple failure modes,the advances mainly involve only random uncertainty.The upper bound of the system failure probability with multiple failure modes is usually employed to quantify the safety level under Random and Interval Hybrid Uncertainty(RI-HU).At present,there is a lack of an efficient and accurate method for estimating the upper bound of the system failure probability.This paper proposed an efficient Kriging model based on numerical simulation algorithm to solve the system reliability analysis under RI-HU.This method proposes a system learning function to train the system Kriging models of the system limit state surface.The convergent Kriging models are used to replace the limit state functions of the system multi-mode for identifying the state of the random sample.The proposed system learning function can adaptively select the failure mode contributing most to the system failure probability from the system and update its Kriging model.Thus,the efficiency of the Kriging training process can be improved by avoiding updating the Kriging models contributing less to estimating the system failure probability.The presented examples illustrate the superiority of the proposed method.展开更多
In this paper, an estimation method for reliability parameter in the case of zero-failuare data-synthetic estimation method is given. For zero-failure data of double-parameter exponential distribution, a hierarchical ...In this paper, an estimation method for reliability parameter in the case of zero-failuare data-synthetic estimation method is given. For zero-failure data of double-parameter exponential distribution, a hierarchical Bayesian estimation of the failure probability is presented. After failure information is introduced, hierarchical Bayesian estimation and synthetic estimation of the failure probability, as well as synthetic estimation of reliability are given. Calculation and analysis are performed regarding practical problems in case that life distribution of an engine obeys double-parameter exponential distribution.展开更多
According to the assumption of intrinsic relationship between ultimate strain energy density and microcrack nucleation,this work developed a fracture failure model to estimate the fracture toughness of A508-III steel ...According to the assumption of intrinsic relationship between ultimate strain energy density and microcrack nucleation,this work developed a fracture failure model to estimate the fracture toughness of A508-III steel in the ductile-to-brittle transition region.The fracture toughness and uniaxial tension tests at different temperatures were carried out to determine the relationship between nucleation parameter and ultimate strain energy density,from which the evolutions of fracture toughness of A508-III ferritic steel for different cumulative failure probabilities at different temperatures were predicted.The fracture failure model can well describe the fracture toughness distribution of A508-III steel in the ductile-to-brittle transition region.Compared with the master curve method,this model has better temperature adaptability.It is more convenient to calibrate the parameters of this model compared with the traditional Beremin model,and without complex finite element analysis.展开更多
It is assumed that the storm wave takes place once a year during the design period, and Nhistories of storm waves are generated on the basis of wave spectrum corresponding to the N-year design period. The responses of...It is assumed that the storm wave takes place once a year during the design period, and Nhistories of storm waves are generated on the basis of wave spectrum corresponding to the N-year design period. The responses of the breakwater to the N histories of storm waves in the N-year design period are calculated by mass-spring-dashpot mode and taken as a set of samples. The failure probability of caisson breakwaters during the design period of N years is obtained by the statistical analysis of many sets of samples. It is the key issue to improve the efficiency of the common Monte Carlo simulation method in the failure probability estimation of caisson breakwaters in the complete life cycle. In this paper, the kernel method of importance sampling, which can greatly increase the efficiency of failure probability calculation of caisson breakwaters, is proposed to estimate the failure probability of caisson breakwaters in the complete life cycle. The effectiveness of the kernel method is investigated by an example. It is indicated that the calculation efficiency of the kernel method is over 10 times the common Monte Carlo simulation method.展开更多
基金funding support from the National Science Fund for Distinguished Young Scholars(Grant No.52125904)the National Key R&D Plan(Grant No.2022YFC3004403)the National Natural Science Foundation of China(Grant No.52039008).
文摘To address prediction errors and limited information extraction in machine learning(ML)-based interval prediction,a hybrid model was proposed for interval estimation and failure assessment of step-like landslides under uncertainty.The model decomposed displacements into trend and periodic components via Variational Mode Decomposition(VMD)and K-shape clustering.The Residual and Moving Block Bootstrap methods were used to generate pseudo datasets.Polynomial regressionwas adopted for trend forecasting,whereas the Dense Convolutional Network(DenseNet)and Long Short-Term Memory(LSTM)networks were employed for periodic displacement prediction.An Extreme Learning Machine(ELM)was used to estimate the noise variance,enabling the construction of Prediction Intervals(PIs)and quantificationof displacement uncertainty.Failure probabilities(Pf)were derived from PIs using an improved tangential angle criterion and reliability analysis.The model was validated on three step-like landslides in the Three Gorges Reservoir Area,achieving stability assessment accuracies of 99.88%(XD01),99.93%(ZG93),99.89%(ZG118),and 100%for ZG110 and ZG111 across the Baishuihe and Bazimen landslides.For the Shuping landslide,the predictions aligned with fieldobservations before and after the 2014–2015 remediation,with P_(f)remaining near zero post-2015 except for occasional peaks.The model outperformed conventional ML approaches by yielding narrower PIs.At XD01 with 90%PI nominal confidencelevel(PINC),the coverage width-based criterion(CWC)and PI average width(PIAW)were 3.38 mm.The mean values of the PIs exhibited high accuracy,with a Mean Absolute Error(MAE)of 0.28 mm and Root Mean Square Error(RMSE)of 0.39 mm.These results demonstrate the robustness of the proposed model in improving landslide risk assessment and decision-making under uncertainty.
基金Ministry of Education,Center for Scientific Research and Development of Higher Education Institutions“Innovative Application of Virtual Simulation Technology in Vocational Education Teaching”Special Project,Project No.ZJXF2022110.
文摘This study presents an innovative approach to calculating the failure probability of slopes by incorporating fuzzylimit-state functions,a method that significantly enhances the accuracy and efficiency of slope stability analysis.Unlike traditional probabilistic techniques,this approach utilizes a least squares support vector machine(LSSVM)optimized with a grey wolf optimizer(GWO)and K-fold cross-validation(CV)to approximate the limit-statefunction,thus reducing computational complexity.The novelty of this work lies in its application to one-dimensional(1D),two-dimensional(2D),and three-dimensional(3D)slope models,demonstrating its versatility andhigh precision.The proposed method consistently achieves error margins within 3%of Monte Carlo simulation(MCS)results,while substantially reducing computation time,particularly for 2D and 3D models.This makes theapproach highly practical for real-world engineering applications.Furthermore,by applying fuzzy mathematics tohandle uncertainties in geotechnical properties,the method offers a more realistic and comprehensive understandingof slope stability.As water is the main factor influencing the stability of slopes,this aspect is investigatedby calculating the phreatic line after the change in water level.Relevant examples are used to show that the failureprobability of a slope under water wading condition can increase by more than 20%(increase rates in 1D,2D and3D conditions being 25%,27%and 31%,respectively)compared with the natural condition.The influence ofdiverse fuzzy membership functions—linear,normal,and Cauchy—on failure probability is also considered.Thisresearch not only provides a strategy for better calculation of the slope failure probability but also pioneers theintegration of computational intelligence,fuzzy logic and fluid-dynamics in geotechnical engineering,presentingan innovative and efficient tool for slope stability analysis.
文摘The R F first order second moment method will produce more error for calculating the reliability of welded engineering pipe structures when the failure function is seriously nonlinear and the random variables don′t serve as normal distribution. In order to increase the computing accuracy of reliability, an improved FOSM method is used for calculating the failure probability of welded pipes with flaws in this paper. Because of solving the problems of the linear expansion of failure function at the failure point and constructing equivalent normal variables, the new algorithm can greatly improve the calculating accuracy of probability of the welded pipes with cracks. The examples show that this method is simple, efficient and accurate for reliability safety assessment of the welded pipes with cracks. It can save more time than the Monte Carlo method does, so that the improved FOSM method is recommended for engineering reliability safety assessment of the welded pipes with flaws.
基金Projects(51409167,51139001,51179066)supported by the National Natural Science Foundation of ChinaProjects(201401022,201501036)supported by the Ministry of Water Resources Public Welfare Industry Research Special Fund,ChinaProjects(GG201532,GG201546)supported by the Scientific and Technological Research for Water Conservancy,Henan Province,China
文摘The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathematical descriptions,namely,limit state functions of failure modes.Several problems are to be solved in the use of traditional methods for gravity dams.One is how to define the limit state function really reflecting the mechanical mechanism of the failure mode;another is how to understand the relationship among failure modes and enable the probability of the whole structure to be determined.Performing SFP analysis for a gravity dam system is a challenging task.This work proposes a novel nonlinear finite-element-based SFP analysis method for gravity dams.Firstly,reasonable nonlinear constitutive modes for dam concrete,concrete/rock interface and rock foundation are respectively introduced according to corresponding mechanical mechanisms.Meanwhile the response surface(RS) method is used to model limit state functions of main failure modes through the Monte Carlo(MC) simulation results of the dam-interface-foundation interaction finite element(FE) analysis.Secondly,a numerical SFP method is studied to compute the probabilities of several failure modes efficiently by simple matrix integration operations.Then,the nonlinear FE-based SFP analysis methodology for gravity dams considering correlated failure modes with the additional sensitivity analysis is proposed.Finally,a comprehensive computational platform for interfacing the proposed method with the open source FE code Code Aster is developed via a freely available MATLAB software tool(FERUM).This methodology is demonstrated by a case study of an existing gravity dam analysis,in which the dominant failure modes are identified,and the corresponding performance functions are established.Then,the dam failure probability of the structural system is obtained by the proposed method considering the correlation relationship of main failure modes on the basis of the mechanical mechanism analysis with the MC-FE simulations.
基金Supported by:Fundamental Research Funds for the Central Universities under Grant No.2021QN1022。
文摘Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a limited probabilistic basis on extreme load combinations.Additionally,the performance of engineering structures will be deteriorated by the aggressive environments during their service periods,such as chloride attack,concrete carbonation,and wind-induced fatigue.This study presents a probabilistic methodology to assess the time-dependent failure probability of RC bridges with chloride-induced corrosion under the multiple hazards of earthquakes and strong winds.The loss of cross-section area of reinforcements and the reduction in strength of reinforcing steel and concrete cover induced by the chloride attack are considered.Moreover,the Poisson model is employed to obtain the occurrence probabilities of the individual and concurrent earthquake and strong wind events.The convolution integral is used to determine the joint probability distribution of combined load effects under simultaneous earthquakes and strong winds.Numerical results indicate that the structural failure probability under multiple hazards increases significantly during the bridge′s life-cycle due to the chloride corrosion effect.The contribution of each hazard event on the total structural failure probability varies with time.Thus,neglecting the combined influences of multiple hazards and chloride-induced corrosion may bring erroneous predictions in failure probability estimates of RC bridges.
基金Project(50378036) supported by the National Natural Science Foundation of ChinaProject(200503) supported by Foundation of Communications Department of Hunan Province, China
文摘Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced according to numerical analysis theory. After complicated multi-independent variables implicit functional function was simplified to be a single independent variable implicit function and rule of calculating derivative for composite function was combined with principle of the mean deviations method, an approximative solution format of implicit functional function was established through Taylor expansion series and iterative solution approach of reliability degree index was given synchronously. An engineering example was analyzed by the method. The result shows its absolute error is only 0.78% as compared with accurate solution.
基金supported by the National Natural Science Foundation of China(Grant No.52308340)the Innovative Projects of Universities in Guangdong(Grant No.2022KTSCX208)Sichuan Transportation Science and Technology Project(Grant No.2018-ZL-01).
文摘Historically,landslides have been the primary type of geological disaster worldwide.Generally,the stability of reservoir banks is primarily affected by rainfall and reservoir water level fluctuations.Moreover,the stability of reservoir banks changes with the long-term dynamics of external disastercausing factors.Thus,assessing the time-varying reliability of reservoir landslides remains a challenge.In this paper,a machine learning(ML)based approach is proposed to analyze the long-term reliability of reservoir bank landslides in spatially variable soils through time series prediction.This study systematically investigated the prediction performances of three ML algorithms,i.e.multilayer perceptron(MLP),convolutional neural network(CNN),and long short-term memory(LSTM).Additionally,the effects of the data quantity and data ratio on the predictive power of deep learning models are considered.The results show that all three ML models can accurately depict the changes in the time-varying failure probability of reservoir landslides.The CNN model outperforms both the MLP and LSTM models in predicting the failure probability.Furthermore,selecting the right data ratio can improve the prediction accuracy of the failure probability obtained by ML models.
基金Project(51204201)supported by the National Natural Science Foundation of ChinaProjects(2011ZX05036-001,2011ZX05037-004)supported by the National Science and Technology Major Program of China+1 种基金Project(2010CB226706)supported by the National Basic Research Program of ChinaProject(11CX04050A)supported by the Fundamental Research Funds for the Central Universities of China
文摘The uncertainties of some key influence factors on coal crushing,such as rock strength,pore pressure and magnitude and orientation of three principal stresses,can lead to the uncertainty of coal crushing and make it very difficult to predict coal crushing under the condition of in-situ reservoir.To account for the uncertainty involved in coal crushing,a deterministic prediction model of coal crushing under the condition of in-situ reservoir was established based on Hoek-Brown criterion.Through this model,key influence factors on coal crushing were selected as random variables and the corresponding probability density functions were determined by combining experiment data and Latin Hypercube method.Then,to analyze the uncertainty of coal crushing,the firstorder second-moment method and the presented model were combined to address the failure probability involved in coal crushing analysis.Using the presented method,the failure probabilities of coal crushing were analyzed for WS5-5 well in Ningwu basin,China,and the relations between failure probability and the influence factors were furthermore discussed.The results show that the failure probabilities of WS5-5 CBM well vary from 0.6 to 1.0; moreover,for the coal seam section at depth of 784.3-785 m,the failure probabilities are equal to 1,which fit well with experiment results; the failure probability of coal crushing presents nonlinear growth relationships with the increase of principal stress difference and the decrease of uniaxial compressive strength.
文摘A general failure probability simulation and deviation evaluation methods were presented for fuzzy safety state and fuzzy failure state. And the corresponding number integral method was simultaneously established. As the distribution of state variable and the membership of the state variable to the fuzzy safety set were normal, the general failure probability of the single failure mode had precise analytic solution, which was used to verify the precision of the presented methods. The results show that the evaluation of the simulation method convergences to the analytic solution with the number increase of the sampling. The above methods for the single failure mode was extended to the multi-mode by the expansion and probability principles. The presented methods were applied to the engineering problem. For the number of significant mode is not too many, the high precision solution can be given by the presented number simulation and number integral methods, which is illustrated by the engineering examples. In addition, the application scope of the methods was discussed.
基金This research is supported by National Key Research and Development Project(Grant Number 2019YFD0901002)Also Natural Science Foundation of Liaoning Province(Grant Number 20170540105)Liaoning Province Education Foundation(Grant Number JL201913)are gratefully acknowledged.
文摘Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction method based on conditional probability theory is proposed to solve the sensitivity analysis based on the approximate analytic method.The relevant concepts are introduced to characterize the correlation between failure modes by the reliability index and correlation coefficient,and conditional normal fractile the for the multi-dimensional conditional failure analysis is proposed based on the two-dimensional normal distribution function.Thus the calculation of system failure probability can be represented as a summation of conditional probability terms,which is convenient to be computed by iterative solving sequentially.Further the system sensitivity solution is transformed into the derivation process of the failure probability correlation coefficient of each failure mode.Numerical examples results show that it is feasible to apply the idea of failure mode relevancy to failure probability sensitivity analysis,and it can avoid multi-dimension integral calculation and reduce complexity and difficulty.Compared with the product of conditional marginalmethod,a wider value range of correlation coefficient for reliability analysis is confirmed and an acceptable accuracy can be obtained with less computational cost.
基金Projects(51021004,51379141)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China
文摘Methodology for the reliability analysis of hydraulic gravity dam is the key technology in current hydropower construction.Reliability analysis for the dynamical dam safety should be divided into two phases:failure mode identification and the calculation of the failure probability.Both of them are studied based on the mathematical statistics and structure reliability theory considering two kinds of uncertainty characters(earthquake variability and material randomness).Firstly,failure mode identification method is established based on the dynamical limit state system and verified through example of Koyna Dam so that the statistical law of progressive failure process in dam body are revealed; Secondly,for the calculation of the failure probability,mathematical model and formula are established according to the characteristics of gravity dam,which include three levels,that is element failure,path failure and system failure.A case study is presented to show the practical application of theoretical method and results of these methods.
基金This work is supported by the Chinese Scholarship Council.
文摘A probabilistic model is proposed that uses observation data to estimate failure probabilities during excavations.The model integrates a Bayesian network and distanced-based Bayesian model updating.In the network,the movement of a retaining wall is selected as the indicator of failure,and the observed ground surface settlement is used to update the soil parameters.The responses of wall deflection and ground surface settlement are accurately predicted using finite element analysis.An artificial neural network is employed to construct the response surface relationship using the aforementioned input factors.The proposed model effectively estimates the uncertainty of influential factors.A case study of a braced excavation is presented to demonstrate the feasibility of the proposed approach.The update results facilitate accurate estimates according to the target value,from which the corresponding probabilities of failure are obtained.The proposed model enables failure probabilities to be determined with real-time result updating.
基金supported by the National Natural Science Foundation of China (Grant No. 51175425)the Aviation Foundation (Grant No.2011ZA53015)
文摘To analyze the effect of the region of the model inputs on the model output,a novel concept about contribution to the sample failure probability plot(CSFP) is proposed based on the contribution to the sample mean plot(CSM) and the contribution to the sample variance plot(CSV).The CSFP can be used to analyze the effect of the region of the model inputs on the failure probability.After the definition of CSFP,its property and the differences between CSFP and CSV/CSM are discussed.The proposed CSFP can not only provide the information about which input affects the failure probability mostly,but also identify the contribution of the regions of the input to the failure probability mostly.By employing the Kriging model method on optimized sample points,a solution for CSFP is obtained.The computational cost for solving CSFP is greatly decreased because of the efficiency of Kriging surrogate model.Some examples are used to illustrate the validity of the proposed CSFP and the applicability and feasibility of the Kriging surrogate method based solution for CSFP.
基金supported by the National Natural Science Foundation of China(42102208)the National Natural Science Foundation of China(41972256).
文摘Coal mining in groundwater-rich coal fields will trigger failure of overlying strata,resulting in the formation of water-conducting fracture zone(WCFZ)and potentially leading to water-inrush accidents.In this study,a reliability model with consideration of spatial variability and uncertainty of strength parameters was proposed to predict the failure behaviour of overlying strata during coal mining in groundwater-rich coalfields.Rock strength parameters,including cohesion,internal friction angle,uniaxial tensile strength,and softening coefficient,are treated as random variables to determine the rock failure uncertainty.The experimental results of these geomechanical parameters at different positions are interpolated by the Kriging interpolation method.Spatially,the interpolated values are arranged as the average value of each random variable to demonstrate their autocorrelation.Furthermore,based on Mohr–Coulomb yield criterion,a performance function is deduced to calculate the failure probabilities of overburden rocks to evaluate the spatial scale of WCFZ.As a typical case,the failure features of adjacent overlying strata of No.7121 mining face in Qidong Coal Mine is analyzed.The results show that the risks of water-inrush are high when the mining face advances to 260–380 m and 1120–1240 m,which aligns with both field monitoring results and borehole observation results.The proposed model holds significant implications for prevention of water-inrush accidents in groundwater-rich coal mines.
文摘The zero_failure data research is a new field in the recent years, but it is required urgently in practical projects, so the work has more theory and practical values. In this paper, for zero_failure data (t i,n i) at moment t i , if the prior distribution of the failure probability p i=p{T【t i} is quasi_exponential distribution, the author gives the p i Bayesian estimation and hierarchical Bayesian estimation and the reliability under zero_failure date condition is also obtained.
基金Federal Highway Administration at the University at Buffalo Under Contract Number DTFH61-08-C-00012
文摘The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability. This is a major advancement in bridge design specifications. However, LRFD is only calibrated for dead and live loads. In cases when extreme loads are significant, they need to be individually assessed. Combining regular loads with extreme loads has been a major challenge, mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure. To overcome these difficulties, this paper suggests a methodology of comprehensive reliability, by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant. Based on these conditions, the extreme loads （also referred to as multiple hazard or MH loads） can be broken down into single effects. In Part II of this paper, a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example. There are three major steps in establishing load factors from MH load distributions： （1） formulate the failure probabilities; （2） normalize various load distributions; and （3） establish design limit state equations. This paper describes the formulation of the failure probabilities of single and combined loads.
文摘In the field of the system reliability analysis with multiple failure modes,the advances mainly involve only random uncertainty.The upper bound of the system failure probability with multiple failure modes is usually employed to quantify the safety level under Random and Interval Hybrid Uncertainty(RI-HU).At present,there is a lack of an efficient and accurate method for estimating the upper bound of the system failure probability.This paper proposed an efficient Kriging model based on numerical simulation algorithm to solve the system reliability analysis under RI-HU.This method proposes a system learning function to train the system Kriging models of the system limit state surface.The convergent Kriging models are used to replace the limit state functions of the system multi-mode for identifying the state of the random sample.The proposed system learning function can adaptively select the failure mode contributing most to the system failure probability from the system and update its Kriging model.Thus,the efficiency of the Kriging training process can be improved by avoiding updating the Kriging models contributing less to estimating the system failure probability.The presented examples illustrate the superiority of the proposed method.
文摘In this paper, an estimation method for reliability parameter in the case of zero-failuare data-synthetic estimation method is given. For zero-failure data of double-parameter exponential distribution, a hierarchical Bayesian estimation of the failure probability is presented. After failure information is introduced, hierarchical Bayesian estimation and synthetic estimation of the failure probability, as well as synthetic estimation of reliability are given. Calculation and analysis are performed regarding practical problems in case that life distribution of an engine obeys double-parameter exponential distribution.
基金This work is financially supported by the National Natural Science Foundation of China(Grant Nos.11872320 and 12072294)the fund of Science and Technology on Reactor Fuel and Materials Laboratory.
文摘According to the assumption of intrinsic relationship between ultimate strain energy density and microcrack nucleation,this work developed a fracture failure model to estimate the fracture toughness of A508-III steel in the ductile-to-brittle transition region.The fracture toughness and uniaxial tension tests at different temperatures were carried out to determine the relationship between nucleation parameter and ultimate strain energy density,from which the evolutions of fracture toughness of A508-III ferritic steel for different cumulative failure probabilities at different temperatures were predicted.The fracture failure model can well describe the fracture toughness distribution of A508-III steel in the ductile-to-brittle transition region.Compared with the master curve method,this model has better temperature adaptability.It is more convenient to calibrate the parameters of this model compared with the traditional Beremin model,and without complex finite element analysis.
基金financially supported by the National Natural Science Foundation of China(Grant No.51279128)the Innovative Research Groups Science Foundation of China(Grant No.51321065)the Construction Science and Technology Project of Ministry of Transport of the People's Republic of China(Grant No.2013328224070)
文摘It is assumed that the storm wave takes place once a year during the design period, and Nhistories of storm waves are generated on the basis of wave spectrum corresponding to the N-year design period. The responses of the breakwater to the N histories of storm waves in the N-year design period are calculated by mass-spring-dashpot mode and taken as a set of samples. The failure probability of caisson breakwaters during the design period of N years is obtained by the statistical analysis of many sets of samples. It is the key issue to improve the efficiency of the common Monte Carlo simulation method in the failure probability estimation of caisson breakwaters in the complete life cycle. In this paper, the kernel method of importance sampling, which can greatly increase the efficiency of failure probability calculation of caisson breakwaters, is proposed to estimate the failure probability of caisson breakwaters in the complete life cycle. The effectiveness of the kernel method is investigated by an example. It is indicated that the calculation efficiency of the kernel method is over 10 times the common Monte Carlo simulation method.
