Using gradually regression analysis to establish the driving force model of utilized change of cultivated land in Gonghe County, and using path analysis, correlation analysis, partial correlation analysis and system d...Using gradually regression analysis to establish the driving force model of utilized change of cultivated land in Gonghe County, and using path analysis, correlation analysis, partial correlation analysis and system dynamics method to inspect the effect of driving changing on cultivated land change under different change situations. Driving factors, action mechanism and process of utilized change of cultivated land were analyzed from the county territory scale level. At last, some corresponding policies and measures were put forward.展开更多
Using path analysis, correlation analysis, partial correlation analysis and system dynamics method to study the driving force of cultivated land in Qinghai Lake Area, and using gradually regression analysis to establi...Using path analysis, correlation analysis, partial correlation analysis and system dynamics method to study the driving force of cultivated land in Qinghai Lake Area, and using gradually regression analysis to establish the driving force model of utilized change of cultivated land. Driving factors, action mechanism and process of utilized change of cultivated land were analyzed, and the differences during all factors were compared. The study provides some decision basis for sustainable utilization and management of land resources in Qinghai Lake Area.展开更多
Seismic force reduction factor(SFRF) spectra of shear-type multi-degree-of-freedom(MDOF) structures are investigated. The modified Clough model, capable of considering the strength-degradation/hardening and stiffnessd...Seismic force reduction factor(SFRF) spectra of shear-type multi-degree-of-freedom(MDOF) structures are investigated. The modified Clough model, capable of considering the strength-degradation/hardening and stiffnessdegradation, is adopted. The SFRF mean spectra using 102 earthquake records on a typical site soil type(type C) are constructed with the period abscissa being divided into three period ranges to maintain the peak features at the two sitespecific characteristic periods. Based on a large number of results, it is found that the peak value of SFRF spectra may also exist for MDOF, induced by large high-mode contributions to elastic base shear, besides the mentioned two peak values. The variations of the stiffness ratio λk and the strength ratio λF of the top to bottom story are both considered. It is found that the SFRFs for λF ≤λk are smaller than those for λF > λk. A SFRF modification factor for MDOF systems is proposed with respect to SDOF. It is found that this factor is significantly affected by the story number and ductility. With a specific λF(= λk0.75), SFRF mean spectra are constructed and simple solutions are presented for MDOF systems. For frames satisfying the strong column/weak beam requirement, an approximate treatment in the MDOF shear-beam model is to assign a post-limit stiffness 15%-35% of the initial stiffness to the hysteretic curve. SFRF spectra for MDOF systems with 0.2 and 0.3 times the post-limit stiffness are remarkably larger than those without post-limit stiffness. Thus, the findings that frames with beam hinges have smaller ductility demand are explained through the large post-limit stiffness.展开更多
Incomplete development of the lung secondary to extreme prematurity or pulmonary hypoplasia causes significant morbidity and mortality during the neonatal period. Currently, the management is primarily supportive with...Incomplete development of the lung secondary to extreme prematurity or pulmonary hypoplasia causes significant morbidity and mortality during the neonatal period. Currently, the management is primarily supportive with no specific treatment to stimulate the growth and development of the lung. Mechanical forces generated inside the fetal lung by constant distention pressure and "breathing-like movements" are a major determinant of fetal lung development. However, the mechanisms by which lung cells sense these mechanical signals to promote lung development are not well-defined. Tracheal ligation has been used not only experimentally but also in human fetuses affected by severe congenital diaphragmatic hernia to stimulate lung growth and decrease the degree of pulmonary hypoplasia. Past investigations suggested that the increase of intratracheal pressure after tracheal ligation releases soluble factors that are critical for lung development. Studies from our laboratory have shown that mechanical strain of fetal type Ⅱ epithelial cells, simulating mechanical forces in utero, promotes differentiation via release of epidermal growth factor receptor ligands heparin binding epidermal growth factor-like growth factor and transforming growth factor alpha. The identification of growth factors released by mechanical forces that are importantfor normal lung development could lead to novel treatments to accelerate lung development.展开更多
The observables of continuous eigenvalues are de?ned in an in?nite-dimensional ket space. The complete set of such eigenstates demands a spectrum density factor, for example, for the photons in the free space and elec...The observables of continuous eigenvalues are de?ned in an in?nite-dimensional ket space. The complete set of such eigenstates demands a spectrum density factor, for example, for the photons in the free space and electrons in the vacuum. From the derivation of the Casimir force without an arti?cial regulator we determine the explicit expression of the spectrum density factor for the photon ?eld to be an exponential function. The undetermined constant in the function is ?xed by the experimental data for the Lamb shift. With that, we predict that there exists a correction to the Casimir force.展开更多
The present paper investigates the methods for estimating the maximum(positive)and the minimum(negative)peak wind force coefficients on domed free roofs based on the quasi-steady theory and the peak factor method,in w...The present paper investigates the methods for estimating the maximum(positive)and the minimum(negative)peak wind force coefficients on domed free roofs based on the quasi-steady theory and the peak factor method,in which the experimental results obtained from our previous studies(2019,2025)are used.Focus is on the distributions of the peak wind force coefficients along the centerline parallel to the wind direction considering that domed free roof is an axisymmetric body.Empirical formulas are provided to the distributions of mean wind force coefficient,RMS(root mean square)fluctuating wind force coefficient and peak factors as a function of the rise/span ratio of the roof and the turbulence intensity of the approach flow in the along-wind direction at the mean roof height.The proposed methods are validated by the experimental results for the peak wind force coefficients.The methods would provide useful information to structural engineers when estimating the design wind loads on cladding/components of domed free roofs.展开更多
Objective To supply a scientific basis for standardizing the normal reference value of forced vital capacity(FVC)of Chinese younger women.Methods We studied the relationship between the normal reference value of 21767...Objective To supply a scientific basis for standardizing the normal reference value of forced vital capacity(FVC)of Chinese younger women.Methods We studied the relationship between the normal reference value of 21767 samples of FVC of younger women and eight geographical factors in 157 areas in China.Results It was found that the correlation between geographical factors and the normal reference value of FVC of younger women was quite significant(F=5.884,P=0.000).By adopting the method of mathematical regression analysis,one regression equation was inferred:=3.146+0.00006919X1+0.01315X4-0.006966X6+0.09524X8±0.254.In the above equation,is the normal reference value of younger women’ FVC(L);X1 is the altitude(m);X4 is the annual mean air temperature(℃);X6 is the annual mean relative humidity(%);X8 is the annual mean wind speed(m/s);0.254 is the value of the residual standard deviation.Conclusion If geographical values are obtained in a certain area,the normal reference value of FVC of younger women in this area can be obtained by using the regression equation.Furthermore,according to the geographical factors,China can be divided into eight regions:Northeast China Region,North China Region,Shanxi-Shaanxi-Inner Mongolia Region,middle and lower reaches of the Yangzte River Region,Southeast China Region,Northwest China Region,Southwest China Region,and Qinghai-Tibet Plateau Region.展开更多
The fracture behavior of superconducting tapes with central and edge oblique cracks subject to electromagnetic forces is investigated. Maxwell's equations and the critical state-Bean model are used to analytically...The fracture behavior of superconducting tapes with central and edge oblique cracks subject to electromagnetic forces is investigated. Maxwell's equations and the critical state-Bean model are used to analytically determine the magnetic flux density and electromagnetic force distributions in superconducting tapes containing central and edge oblique cracks. The distributed dislocation technique(DDT) transforms the mixed boundary value problem into a Cauchy singular integral equation, which is then solved by the Gauss-Chebyshev quadrature method to determine the stress intensity factors(SIFs).The model's accuracy is validated by comparing the calculated electromagnetic force distribution for the edge oblique crack and the SIFs for both crack types with the existing results. The findings indicate that the current and electromagnetic forces are significantly affected by the crack length and oblique angle. Specifically, for central oblique cracks, a smaller oblique angle enhances the risk of crack propagation, and a higher initial magnetization intensity poses greater danger under field cooling(FC) excitation. In contrast, for edge oblique cracks, a larger angle increases the likelihood of tape fractures. This study provides important insights into the fracture behavior and mechanical failure mechanisms of superconducting tapes with oblique cracks.展开更多
Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nan...Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nanofluids taking account of the volume fraction φ. The Navier-Stokes equations are solved numerically by alternating an implicit method (Method ADI) for various Rayleigh numbers varies as 103, 104 and 105. The nanofluid used is aluminum oxide with water Pr = 6.2;solid volume fraction φ is varied as 0%, 5% and 10%. Inclination angle Φ varies from 0° to 90° with a step the 15° and the form report varies as R = 0.25, 0.5, 1 and 4. The problem considered is a two-dimensional heat transfer enclosure. The vertical walls are differentially heated;the right is cold when the left is hot. The horizontal walls are assumed to be insulated. The nanofluid in the cavity is considered as incompressible, Newtonian and laminar flow. The nanoparticles are assumed to have a shape and a uniform size. However, it is supposed that the two fluid phases and nanoparticles are in a state of thermal equilibrium and they sink at the same speed. The thermophysical properties of nanofluids are assumed to be constant at the exception of the variation of density in the force of buoyancy, which is based on the approximation of Boussinesq values.展开更多
This study aimed to discuss the phased evolution problems in driving forces of regional tourism industry in China from the perspective of temporal and spatial variation of provincial tourism destinations since reform ...This study aimed to discuss the phased evolution problems in driving forces of regional tourism industry in China from the perspective of temporal and spatial variation of provincial tourism destinations since reform and opening-up,then its own conclusion was drawn out and suggestions to sustainable development of regional tourism industry were put forward.展开更多
Identifying the driving forces that cause changes in forest ecosystem services related to water conservation is essential for the design of interventions that could enhance positive impacts as well as minimizing negat...Identifying the driving forces that cause changes in forest ecosystem services related to water conservation is essential for the design of interventions that could enhance positive impacts as well as minimizing negative impacts. In this study, we propose an assessment concept framework model for indirect-direct-ecosystem service （IN-DI-ESS） driving forces within this context and method for index construction that considers the selection of a robust and parsimonious variable set. Factor analysis was integrated into two-stage data envelopment analysis （TS-DEA） to determine the driving forces and their effects on water conservation services in forest ecosystems at the provincial scale in China. The results showed the following. 1） Ten indicators with factor scores more than 0.8 were selected as the minimum data set. Four indicators comprising population density, per capita gross domestic product, irrigation efficiency, and per capita food consumption were the indirect driving factors, and six indicators comprising precipitation, farmland into forestry or pasture, forest cover, habitat area, water footprint, and wood extraction were the direct driving forces. 2） Spearman＇s rank correlation test was performed to compare the overall effectiveness in two periods： stage 1 and stage 2. The calculated coefficients were 0.245, 0.136, and 0.579, respectively, whereas the tabulated value was 0.562. This indicates that the driving forces obviously differed in terms of their contribution to the overall effectiveness and they caused changes in water conservation services in different stages. In terms of the variations in different driving force effects in the years 2000 and 2010, the overall, stage 1, and stage 2 variances were 0.020, 0.065, and 0.079 in 2000, respectively, and 0.018, 0.063, and 0.071 in 2010. This also indicates that heterogeneous driving force effects were obvious in the process during the same period. Identifying the driving forces that affect service changes and evaluating their efficiency have significant policy implications for the management of forest ecosystem services. Advanced effectiveness measures for weak regions could be improved in an appropriate manner. In this study, we showed that factor analysis coupled with TS-DEA based on the IN-D1-ESS framework can increase the parsimony of driving force indicators, as well as interpreting the interactions among indirect and direct driving forces with forest ecosystem water conservation services, and reducing the uncertainty related to the internal consistency during data selection.展开更多
By selecting impact factors of driving force and formulating evaluation criteria of the impacts, the evaluation system of corresponding driving force impact of land use change was established. Taking Lu'an mining ...By selecting impact factors of driving force and formulating evaluation criteria of the impacts, the evaluation system of corresponding driving force impact of land use change was established. Taking Lu'an mining area as an example, the specific impact factors of coal mine were comprehensively evaluated and analyzed in order to carry out qualitative and quantitative analysis for the driving force of mining-land use change. The principal component analysis shows that the social and economic development in mining area from 2000 to 2007 demonstrates continuous accelerate trends, and the impacts of its overall driving force to land use change are increased gradually. The socio-economic factors have more impacts to mining-land use change than those of the natural resources. The main driving force of mining-land use change also include population, technological progress and policy.展开更多
The shear stress generated by the wind on the land surface is the driving force that results in the wind erosion of the soil.It is an independent factor influencing soil wind erosion.The factors related to wind erosiv...The shear stress generated by the wind on the land surface is the driving force that results in the wind erosion of the soil.It is an independent factor influencing soil wind erosion.The factors related to wind erosivity,known as submodels,mainly include the weather factor(WF)in revised wind erosion equation(RWEQ),the erosion submodel(ES)in wind erosion prediction system(WEPS),as well as the drift potential(DP)in wind energy environmental assessment.However,the essential factors of WF and ES contain wind,soil characteristics and surface coverings,which therefore results in the interdependence between WF or ES and other factors(e.g.,soil erodible factor)in soil erosion models.Considering that DP is a relative indicator of the wind energy environment and does not have the value of expressing wind to induce shear stress on the surface.Therefore,a new factor is needed to express accurately wind erosivity.Based on the theoretical basis that the soil loss by wind erosion(Q)is proportional to the shear stress of the wind on the soil surface,a new model of wind driving force(WDF)was established,which expresses the potential capacity of wind to drive soil mass in per unit area and a period of time.Through the calculations in the typical area,the WDF,WF and DP are compared and analyzed from the theoretical basis,construction goal,problem-solving ability and typical area application;the spatial distribution of soil wind erosion intensity was concurrently compared with the spatial distributions of the WDF,WF and DP values in the typical area.The results indicate that the WDF is better to reflect the potential capacity of wind erosivity than WF and DP,and that the WDF model is a good model with universal applicability and can be logically incorporated into the soil wind erosion models.展开更多
The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to m...The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and back pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.展开更多
Constituting the reasonable control models of the wrinkle limit blank holder forces is the sticking point of the processes of the deep drawing with variable blank-holder forces, especially in the square-box forming. T...Constituting the reasonable control models of the wrinkle limit blank holder forces is the sticking point of the processes of the deep drawing with variable blank-holder forces, especially in the square-box forming. To begin with, a mode of segmenting flange of the square-box into eight zones is put forward according to the fact that the uniformity of flange deforming can be improved by control-ling segment blank-holders. Considering the integral influence of shear stress, a new concept, strain relaxation factor is defined. Hereby, the law of distribution of stress and stain in the deforming flange of square-box is achieved. Then based on these mechanical analysis models and the energy principle, the wrinkling flexivity functions of the straight flange and the circle flange are given, and the corresponding formulae of wrinkling limit blank-holder force in these two situations are also educed. In these processes, ply-anisotropy, strain hardening, thickness and friction are considered. In the end, a calculating example is designed to validate the rationality of the formulae of wrinkling limit blank-holder force, at the same time, the influences of the ply-anisotropy exponent and the strain hardening exponent on the wrinkle limit blank holder forces are also analyzed.展开更多
With the rapid development of my country’s economy, the demand for infrastructure construction is also increasing. However, in most areas of China, the terrains are mountainous and hilly. Some projects have to be bui...With the rapid development of my country’s economy, the demand for infrastructure construction is also increasing. However, in most areas of China, the terrains are mountainous and hilly. Some projects have to be built on steep slopes. Choosing viaducts or half-bridges on high-steep slopes is not only conducive to the protection of the surrounding environment, but also conducive to the stability of the slope. Bridges usually choose the form of pile </span><span style="font-family:Verdana;">foundation-high pier bridge. This paper uses numerical simulation to study and analyze the bridge pile foundation of the slope section. Relying on actual</span><span style="font-family:Verdana;"> engineering, use the finite element software ABAQUS6.14 to establish a three-dimensional finite element model to study the bearing mechanism and mechanical characteristics of the pile foundation under vertical load, horizontal load and inclined load, discuss the influence of the nature of the soil around the pile and the stiffness of the pile body on the deformation and internal force of the bridge pile foundation in the slope section. The analysis results show that the horizontal load has a great influence on the horizontal displacement of the pile, but has a small influence on the vertical displacement, and the vertical load is just the opposite. Inclined load has obvious “p-Δ” effect. The increase in soil elastic modulus and pile stiffness will reduce the displacement of the pile foundation, but after reaching a certain range, the displacement of the pile foundation will tend to be stable. Therefore, in actual engineering, if the displacement of the pile foundation fails to meet the requirements, the hardness of the soil and the stiffness of the pile can be appropriately increased, but not blindly.展开更多
To numerically study the impact of total temperature distortion on a transonic compressor with reduced computational costs,a Body-Force Model(BFM)is developed.Firstly,the interactions between the distorted flow and th...To numerically study the impact of total temperature distortion on a transonic compressor with reduced computational costs,a Body-Force Model(BFM)is developed.Firstly,the interactions between the distorted flow and the compressor are analyzed using full-annulus Unsteady Reynolds-Averaged Navier-Stokes(URANS)results and the orbit method.It is found that the induced swirl distortion and the mass flux nonuniformity are intensified in the compressor upstream flow field.A correction factor is thus added to the BFM to account for the effect of the induced swirl,which is crucial for the accurate representation of distortion transfer in the intake.Then,steady simulations with large-amplitude 180circumferential total temperature distortion are performed using the developed BFM.It is shown that the distorted compressor map simulated with the BFM matches well with URANS results.The circumferential phase shift of total temperature and the generation of the additional total pressure distortion across the rotor are in line with the time-averaged URANS flow field.The compressor upstream effects on the distorted inflow can also be exactly captured.All above-mentioned results demonstrate the BFM developed in this paper can effectively capture the distorted flow features inside the compressor,and significantly reduce the computational costs by five orders of magnitude compared with URANS.展开更多
The Symmetric Galerkin Boundary Element Method is advantageous for the linear elastic fracture and crackgrowth analysis of solid structures,because only boundary and crack-surface elements are needed.However,for engin...The Symmetric Galerkin Boundary Element Method is advantageous for the linear elastic fracture and crackgrowth analysis of solid structures,because only boundary and crack-surface elements are needed.However,for engineering structures subjected to body forces such as rotational inertia and gravitational loads,additional domain integral terms in the Galerkin boundary integral equation will necessitate meshing of the interior of the domain.In this study,weakly-singular SGBEM for fracture analysis of three-dimensional structures considering rotational inertia and gravitational forces are developed.By using divergence theorem or alternatively the radial integration method,the domain integral terms caused by body forces are transformed into boundary integrals.And due to the weak singularity of the formulated boundary integral equations,a simple Gauss-Legendre quadrature with a few integral points is sufficient for numerically evaluating the SGBEM equations.Some numerical examples are presented to verify this approach and results are compared with benchmark solutions.展开更多
Change trend of cultivated land and construction land in Hubei Province is analyzed.The years 1998-2003 are the reduction period of cultivated land;the years 2004-2007 are the increase period of cultivated land;the ye...Change trend of cultivated land and construction land in Hubei Province is analyzed.The years 1998-2003 are the reduction period of cultivated land;the years 2004-2007 are the increase period of cultivated land;the years 1988-2002 are the slow growth period of construction land;and the years of 2003 and 2007 are the increase period of construction land.Based on related social economic statistical data in 1988-2007,human driving forces on cultivated land and construction land in Hubei Province are analyzed quantitatively and comparatively by using SPSS software and mathematical statistics method.Result shows that driving force factors have negative driving effect on cultivated land,and positive driving effect on construction land.Driving force factors have significant differences of driving effects on cultivated land and construction land.Three principal components affecting the changes of cultivated land and construction land are policy,population and economic development level,and gap between urban and rural living standards.The three principal components have different degrees of sensitivity on the two land use types and the effects direction are reverse.The other factor driving abilities are relatively weak,and these factors have relatively stronger driving force on construction land than that on cultivated land.It is put forward that Hubei Province should implement rational allocation of land resources and scientific and rational use in order to ensure land security and to realize the sustainable development of regional economy and society based on the intensive land use,the planning policy constraints,and the agricultural and industrial production.展开更多
Based on the experimental data of crop yield, soil water and fertility of a dryland farming ecosystem in northwest China, asystematic analysis is carried out to study the dynamics of dryland farming ecosystem producti...Based on the experimental data of crop yield, soil water and fertility of a dryland farming ecosystem in northwest China, asystematic analysis is carried out to study the dynamics of dryland farming ecosystem productivity and its limitingfactors. This paper also discusses which of the two limiting factors, i.e., soil water or fertility, is the primary factor and theirdynamics. The result shows that fertility is the primary limiting factor when the productivity is rather low. As chemicalfertilizer input increases and the productivity promotes, water gradually becomes the primary limiting factor. Chemicalfertilizers and plastic film mulching are the two major driving forces that determine the crop productivity and its stabilityin these areas.展开更多
基金Supported by the National Social Science Fund(06XMZ014)~~
文摘Using gradually regression analysis to establish the driving force model of utilized change of cultivated land in Gonghe County, and using path analysis, correlation analysis, partial correlation analysis and system dynamics method to inspect the effect of driving changing on cultivated land change under different change situations. Driving factors, action mechanism and process of utilized change of cultivated land were analyzed from the county territory scale level. At last, some corresponding policies and measures were put forward.
基金Supported by The Regional Sustainable Development of the Qing-TibetPlateau(2004)~~
文摘Using path analysis, correlation analysis, partial correlation analysis and system dynamics method to study the driving force of cultivated land in Qinghai Lake Area, and using gradually regression analysis to establish the driving force model of utilized change of cultivated land. Driving factors, action mechanism and process of utilized change of cultivated land were analyzed, and the differences during all factors were compared. The study provides some decision basis for sustainable utilization and management of land resources in Qinghai Lake Area.
基金Supported by:National Key Research and Development Program of China under Grant No.2016YFC0701201
文摘Seismic force reduction factor(SFRF) spectra of shear-type multi-degree-of-freedom(MDOF) structures are investigated. The modified Clough model, capable of considering the strength-degradation/hardening and stiffnessdegradation, is adopted. The SFRF mean spectra using 102 earthquake records on a typical site soil type(type C) are constructed with the period abscissa being divided into three period ranges to maintain the peak features at the two sitespecific characteristic periods. Based on a large number of results, it is found that the peak value of SFRF spectra may also exist for MDOF, induced by large high-mode contributions to elastic base shear, besides the mentioned two peak values. The variations of the stiffness ratio λk and the strength ratio λF of the top to bottom story are both considered. It is found that the SFRFs for λF ≤λk are smaller than those for λF > λk. A SFRF modification factor for MDOF systems is proposed with respect to SDOF. It is found that this factor is significantly affected by the story number and ductility. With a specific λF(= λk0.75), SFRF mean spectra are constructed and simple solutions are presented for MDOF systems. For frames satisfying the strong column/weak beam requirement, an approximate treatment in the MDOF shear-beam model is to assign a post-limit stiffness 15%-35% of the initial stiffness to the hysteretic curve. SFRF spectra for MDOF systems with 0.2 and 0.3 times the post-limit stiffness are remarkably larger than those without post-limit stiffness. Thus, the findings that frames with beam hinges have smaller ductility demand are explained through the large post-limit stiffness.
基金Supported by National Institutes of Health,Grant R01 HD052670
文摘Incomplete development of the lung secondary to extreme prematurity or pulmonary hypoplasia causes significant morbidity and mortality during the neonatal period. Currently, the management is primarily supportive with no specific treatment to stimulate the growth and development of the lung. Mechanical forces generated inside the fetal lung by constant distention pressure and "breathing-like movements" are a major determinant of fetal lung development. However, the mechanisms by which lung cells sense these mechanical signals to promote lung development are not well-defined. Tracheal ligation has been used not only experimentally but also in human fetuses affected by severe congenital diaphragmatic hernia to stimulate lung growth and decrease the degree of pulmonary hypoplasia. Past investigations suggested that the increase of intratracheal pressure after tracheal ligation releases soluble factors that are critical for lung development. Studies from our laboratory have shown that mechanical strain of fetal type Ⅱ epithelial cells, simulating mechanical forces in utero, promotes differentiation via release of epidermal growth factor receptor ligands heparin binding epidermal growth factor-like growth factor and transforming growth factor alpha. The identification of growth factors released by mechanical forces that are importantfor normal lung development could lead to novel treatments to accelerate lung development.
基金Supported by the National Natural Science Foundation of China under Grant No.11774316the Natural Science Foundation of Zhejiang Province under Grant No.Z15A050001
文摘The observables of continuous eigenvalues are de?ned in an in?nite-dimensional ket space. The complete set of such eigenstates demands a spectrum density factor, for example, for the photons in the free space and electrons in the vacuum. From the derivation of the Casimir force without an arti?cial regulator we determine the explicit expression of the spectrum density factor for the photon ?eld to be an exponential function. The undetermined constant in the function is ?xed by the experimental data for the Lamb shift. With that, we predict that there exists a correction to the Casimir force.
文摘The present paper investigates the methods for estimating the maximum(positive)and the minimum(negative)peak wind force coefficients on domed free roofs based on the quasi-steady theory and the peak factor method,in which the experimental results obtained from our previous studies(2019,2025)are used.Focus is on the distributions of the peak wind force coefficients along the centerline parallel to the wind direction considering that domed free roof is an axisymmetric body.Empirical formulas are provided to the distributions of mean wind force coefficient,RMS(root mean square)fluctuating wind force coefficient and peak factors as a function of the rise/span ratio of the roof and the turbulence intensity of the approach flow in the along-wind direction at the mean roof height.The proposed methods are validated by the experimental results for the peak wind force coefficients.The methods would provide useful information to structural engineers when estimating the design wind loads on cladding/components of domed free roofs.
基金supported by the National Natural Science Foundation of China(No.40671005)
文摘Objective To supply a scientific basis for standardizing the normal reference value of forced vital capacity(FVC)of Chinese younger women.Methods We studied the relationship between the normal reference value of 21767 samples of FVC of younger women and eight geographical factors in 157 areas in China.Results It was found that the correlation between geographical factors and the normal reference value of FVC of younger women was quite significant(F=5.884,P=0.000).By adopting the method of mathematical regression analysis,one regression equation was inferred:=3.146+0.00006919X1+0.01315X4-0.006966X6+0.09524X8±0.254.In the above equation,is the normal reference value of younger women’ FVC(L);X1 is the altitude(m);X4 is the annual mean air temperature(℃);X6 is the annual mean relative humidity(%);X8 is the annual mean wind speed(m/s);0.254 is the value of the residual standard deviation.Conclusion If geographical values are obtained in a certain area,the normal reference value of FVC of younger women in this area can be obtained by using the regression equation.Furthermore,according to the geographical factors,China can be divided into eight regions:Northeast China Region,North China Region,Shanxi-Shaanxi-Inner Mongolia Region,middle and lower reaches of the Yangzte River Region,Southeast China Region,Northwest China Region,Southwest China Region,and Qinghai-Tibet Plateau Region.
基金Project supported by the National Natural Science Foundation of China (Nos. 12232005 and 12072101)the Ningxia Natural Science Foundation of China (No. 2024AAC04004)。
文摘The fracture behavior of superconducting tapes with central and edge oblique cracks subject to electromagnetic forces is investigated. Maxwell's equations and the critical state-Bean model are used to analytically determine the magnetic flux density and electromagnetic force distributions in superconducting tapes containing central and edge oblique cracks. The distributed dislocation technique(DDT) transforms the mixed boundary value problem into a Cauchy singular integral equation, which is then solved by the Gauss-Chebyshev quadrature method to determine the stress intensity factors(SIFs).The model's accuracy is validated by comparing the calculated electromagnetic force distribution for the edge oblique crack and the SIFs for both crack types with the existing results. The findings indicate that the current and electromagnetic forces are significantly affected by the crack length and oblique angle. Specifically, for central oblique cracks, a smaller oblique angle enhances the risk of crack propagation, and a higher initial magnetization intensity poses greater danger under field cooling(FC) excitation. In contrast, for edge oblique cracks, a larger angle increases the likelihood of tape fractures. This study provides important insights into the fracture behavior and mechanical failure mechanisms of superconducting tapes with oblique cracks.
文摘Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nanofluids taking account of the volume fraction φ. The Navier-Stokes equations are solved numerically by alternating an implicit method (Method ADI) for various Rayleigh numbers varies as 103, 104 and 105. The nanofluid used is aluminum oxide with water Pr = 6.2;solid volume fraction φ is varied as 0%, 5% and 10%. Inclination angle Φ varies from 0° to 90° with a step the 15° and the form report varies as R = 0.25, 0.5, 1 and 4. The problem considered is a two-dimensional heat transfer enclosure. The vertical walls are differentially heated;the right is cold when the left is hot. The horizontal walls are assumed to be insulated. The nanofluid in the cavity is considered as incompressible, Newtonian and laminar flow. The nanoparticles are assumed to have a shape and a uniform size. However, it is supposed that the two fluid phases and nanoparticles are in a state of thermal equilibrium and they sink at the same speed. The thermophysical properties of nanofluids are assumed to be constant at the exception of the variation of density in the force of buoyancy, which is based on the approximation of Boussinesq values.
基金Supported by Henan Province philosophy social sciences planned project gradualness research results(2008BJJ012)~~
文摘This study aimed to discuss the phased evolution problems in driving forces of regional tourism industry in China from the perspective of temporal and spatial variation of provincial tourism destinations since reform and opening-up,then its own conclusion was drawn out and suggestions to sustainable development of regional tourism industry were put forward.
基金Under the auspices of Science and Technology Service Network Initiative Project of the Chinese Academy of Sciences(No.KFJ-EW-STS-002)
文摘Identifying the driving forces that cause changes in forest ecosystem services related to water conservation is essential for the design of interventions that could enhance positive impacts as well as minimizing negative impacts. In this study, we propose an assessment concept framework model for indirect-direct-ecosystem service （IN-DI-ESS） driving forces within this context and method for index construction that considers the selection of a robust and parsimonious variable set. Factor analysis was integrated into two-stage data envelopment analysis （TS-DEA） to determine the driving forces and their effects on water conservation services in forest ecosystems at the provincial scale in China. The results showed the following. 1） Ten indicators with factor scores more than 0.8 were selected as the minimum data set. Four indicators comprising population density, per capita gross domestic product, irrigation efficiency, and per capita food consumption were the indirect driving factors, and six indicators comprising precipitation, farmland into forestry or pasture, forest cover, habitat area, water footprint, and wood extraction were the direct driving forces. 2） Spearman＇s rank correlation test was performed to compare the overall effectiveness in two periods： stage 1 and stage 2. The calculated coefficients were 0.245, 0.136, and 0.579, respectively, whereas the tabulated value was 0.562. This indicates that the driving forces obviously differed in terms of their contribution to the overall effectiveness and they caused changes in water conservation services in different stages. In terms of the variations in different driving force effects in the years 2000 and 2010, the overall, stage 1, and stage 2 variances were 0.020, 0.065, and 0.079 in 2000, respectively, and 0.018, 0.063, and 0.071 in 2010. This also indicates that heterogeneous driving force effects were obvious in the process during the same period. Identifying the driving forces that affect service changes and evaluating their efficiency have significant policy implications for the management of forest ecosystem services. Advanced effectiveness measures for weak regions could be improved in an appropriate manner. In this study, we showed that factor analysis coupled with TS-DEA based on the IN-D1-ESS framework can increase the parsimony of driving force indicators, as well as interpreting the interactions among indirect and direct driving forces with forest ecosystem water conservation services, and reducing the uncertainty related to the internal consistency during data selection.
基金Project(MTKJ2010-377)supported by the Sci-tech Plan Project of China National Coal AssociationProject(B2006-18)supported by the Doctor Fund of Henan Polytechnic University
文摘By selecting impact factors of driving force and formulating evaluation criteria of the impacts, the evaluation system of corresponding driving force impact of land use change was established. Taking Lu'an mining area as an example, the specific impact factors of coal mine were comprehensively evaluated and analyzed in order to carry out qualitative and quantitative analysis for the driving force of mining-land use change. The principal component analysis shows that the social and economic development in mining area from 2000 to 2007 demonstrates continuous accelerate trends, and the impacts of its overall driving force to land use change are increased gradually. The socio-economic factors have more impacts to mining-land use change than those of the natural resources. The main driving force of mining-land use change also include population, technological progress and policy.
基金This work was supported by the National Natural Science Foundation of China(41330746,41630747).
文摘The shear stress generated by the wind on the land surface is the driving force that results in the wind erosion of the soil.It is an independent factor influencing soil wind erosion.The factors related to wind erosivity,known as submodels,mainly include the weather factor(WF)in revised wind erosion equation(RWEQ),the erosion submodel(ES)in wind erosion prediction system(WEPS),as well as the drift potential(DP)in wind energy environmental assessment.However,the essential factors of WF and ES contain wind,soil characteristics and surface coverings,which therefore results in the interdependence between WF or ES and other factors(e.g.,soil erodible factor)in soil erosion models.Considering that DP is a relative indicator of the wind energy environment and does not have the value of expressing wind to induce shear stress on the surface.Therefore,a new factor is needed to express accurately wind erosivity.Based on the theoretical basis that the soil loss by wind erosion(Q)is proportional to the shear stress of the wind on the soil surface,a new model of wind driving force(WDF)was established,which expresses the potential capacity of wind to drive soil mass in per unit area and a period of time.Through the calculations in the typical area,the WDF,WF and DP are compared and analyzed from the theoretical basis,construction goal,problem-solving ability and typical area application;the spatial distribution of soil wind erosion intensity was concurrently compared with the spatial distributions of the WDF,WF and DP values in the typical area.The results indicate that the WDF is better to reflect the potential capacity of wind erosivity than WF and DP,and that the WDF model is a good model with universal applicability and can be logically incorporated into the soil wind erosion models.
文摘The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and back pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.
文摘Constituting the reasonable control models of the wrinkle limit blank holder forces is the sticking point of the processes of the deep drawing with variable blank-holder forces, especially in the square-box forming. To begin with, a mode of segmenting flange of the square-box into eight zones is put forward according to the fact that the uniformity of flange deforming can be improved by control-ling segment blank-holders. Considering the integral influence of shear stress, a new concept, strain relaxation factor is defined. Hereby, the law of distribution of stress and stain in the deforming flange of square-box is achieved. Then based on these mechanical analysis models and the energy principle, the wrinkling flexivity functions of the straight flange and the circle flange are given, and the corresponding formulae of wrinkling limit blank-holder force in these two situations are also educed. In these processes, ply-anisotropy, strain hardening, thickness and friction are considered. In the end, a calculating example is designed to validate the rationality of the formulae of wrinkling limit blank-holder force, at the same time, the influences of the ply-anisotropy exponent and the strain hardening exponent on the wrinkle limit blank holder forces are also analyzed.
文摘With the rapid development of my country’s economy, the demand for infrastructure construction is also increasing. However, in most areas of China, the terrains are mountainous and hilly. Some projects have to be built on steep slopes. Choosing viaducts or half-bridges on high-steep slopes is not only conducive to the protection of the surrounding environment, but also conducive to the stability of the slope. Bridges usually choose the form of pile </span><span style="font-family:Verdana;">foundation-high pier bridge. This paper uses numerical simulation to study and analyze the bridge pile foundation of the slope section. Relying on actual</span><span style="font-family:Verdana;"> engineering, use the finite element software ABAQUS6.14 to establish a three-dimensional finite element model to study the bearing mechanism and mechanical characteristics of the pile foundation under vertical load, horizontal load and inclined load, discuss the influence of the nature of the soil around the pile and the stiffness of the pile body on the deformation and internal force of the bridge pile foundation in the slope section. The analysis results show that the horizontal load has a great influence on the horizontal displacement of the pile, but has a small influence on the vertical displacement, and the vertical load is just the opposite. Inclined load has obvious “p-Δ” effect. The increase in soil elastic modulus and pile stiffness will reduce the displacement of the pile foundation, but after reaching a certain range, the displacement of the pile foundation will tend to be stable. Therefore, in actual engineering, if the displacement of the pile foundation fails to meet the requirements, the hardness of the soil and the stiffness of the pile can be appropriately increased, but not blindly.
基金the National Science and Technology Major Project,China(Nos.J2019-Ⅱ-0020-0041 and J2019-Ⅱ-0017-0038)the Science Center for Gas Turbine Project,China(No.P2022-A-Ⅱ-002-001)the National Natural Science Foundation of China(No.52206061).
文摘To numerically study the impact of total temperature distortion on a transonic compressor with reduced computational costs,a Body-Force Model(BFM)is developed.Firstly,the interactions between the distorted flow and the compressor are analyzed using full-annulus Unsteady Reynolds-Averaged Navier-Stokes(URANS)results and the orbit method.It is found that the induced swirl distortion and the mass flux nonuniformity are intensified in the compressor upstream flow field.A correction factor is thus added to the BFM to account for the effect of the induced swirl,which is crucial for the accurate representation of distortion transfer in the intake.Then,steady simulations with large-amplitude 180circumferential total temperature distortion are performed using the developed BFM.It is shown that the distorted compressor map simulated with the BFM matches well with URANS results.The circumferential phase shift of total temperature and the generation of the additional total pressure distortion across the rotor are in line with the time-averaged URANS flow field.The compressor upstream effects on the distorted inflow can also be exactly captured.All above-mentioned results demonstrate the BFM developed in this paper can effectively capture the distorted flow features inside the compressor,and significantly reduce the computational costs by five orders of magnitude compared with URANS.
基金support of the National Natural Science Foundation of China(12072011).
文摘The Symmetric Galerkin Boundary Element Method is advantageous for the linear elastic fracture and crackgrowth analysis of solid structures,because only boundary and crack-surface elements are needed.However,for engineering structures subjected to body forces such as rotational inertia and gravitational loads,additional domain integral terms in the Galerkin boundary integral equation will necessitate meshing of the interior of the domain.In this study,weakly-singular SGBEM for fracture analysis of three-dimensional structures considering rotational inertia and gravitational forces are developed.By using divergence theorem or alternatively the radial integration method,the domain integral terms caused by body forces are transformed into boundary integrals.And due to the weak singularity of the formulated boundary integral equations,a simple Gauss-Legendre quadrature with a few integral points is sufficient for numerically evaluating the SGBEM equations.Some numerical examples are presented to verify this approach and results are compared with benchmark solutions.
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(KZCX2-YW-315-4)the National Key Project of Scientific and Technical Supporting Program(2007BAC03A01)+1 种基金the Foundation for Excellent Middle Age and Youth Innovation Team in Colleges and Universities of Hubei Province(T200708)the Natural Science Foundation of Hubei Province(2006BAB15B02)
文摘Change trend of cultivated land and construction land in Hubei Province is analyzed.The years 1998-2003 are the reduction period of cultivated land;the years 2004-2007 are the increase period of cultivated land;the years 1988-2002 are the slow growth period of construction land;and the years of 2003 and 2007 are the increase period of construction land.Based on related social economic statistical data in 1988-2007,human driving forces on cultivated land and construction land in Hubei Province are analyzed quantitatively and comparatively by using SPSS software and mathematical statistics method.Result shows that driving force factors have negative driving effect on cultivated land,and positive driving effect on construction land.Driving force factors have significant differences of driving effects on cultivated land and construction land.Three principal components affecting the changes of cultivated land and construction land are policy,population and economic development level,and gap between urban and rural living standards.The three principal components have different degrees of sensitivity on the two land use types and the effects direction are reverse.The other factor driving abilities are relatively weak,and these factors have relatively stronger driving force on construction land than that on cultivated land.It is put forward that Hubei Province should implement rational allocation of land resources and scientific and rational use in order to ensure land security and to realize the sustainable development of regional economy and society based on the intensive land use,the planning policy constraints,and the agricultural and industrial production.
基金supported by the National Natural Science Foundation of China(90102012)the Chinese Ecosystem Research Network(2001BA508B18
文摘Based on the experimental data of crop yield, soil water and fertility of a dryland farming ecosystem in northwest China, asystematic analysis is carried out to study the dynamics of dryland farming ecosystem productivity and its limitingfactors. This paper also discusses which of the two limiting factors, i.e., soil water or fertility, is the primary factor and theirdynamics. The result shows that fertility is the primary limiting factor when the productivity is rather low. As chemicalfertilizer input increases and the productivity promotes, water gradually becomes the primary limiting factor. Chemicalfertilizers and plastic film mulching are the two major driving forces that determine the crop productivity and its stabilityin these areas.
