A new solid acid catalyst,SO4^2-/TiO2 modified with tin,was prepared using a sol-gel method and its physicochemical properties were revealed by nitrogen adsorption-desorption,X-ray powder diffraction,scanning electron...A new solid acid catalyst,SO4^2-/TiO2 modified with tin,was prepared using a sol-gel method and its physicochemical properties were revealed by nitrogen adsorption-desorption,X-ray powder diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,infrared spectroscopy of adsorbed pyridine,temperature-programmed desorption of ammonia and thermal gravimetric analysis.The structure,acidity and thermal stability of the SO4^2-/TiO2-SnO2 catalyst were studied.Incorporating tin enlarged the specific surface area and decreased crystallite size of the SO4^2-/TiO2 catalyst.The total acid sites of the modified catalyst increased and Bronsted acid strength remarkably increased with increasing tin content.The decomposition temperature of sulfate radical in the modified catalyst was 100 ℃ greater and its mass loss was more than twice that of the SO4^2-/TiO2 catalyst.The SO4^2-/TiO2-SnO2 catalyst was designed to synthesize 1,6-hexanediol diacrylate by esterification of 1,6-hexanediol with crylic acid.The yield of 1,6-hexanediol diacrylate exceeded 87% under the optimal reaction conditions：crylic acid to 1,6-hexanediol molar ratio = 3.5,catalyst loading = 7%,reaction temperature = 130 ℃ and reaction time = 3 h.The modified catalyst exhibited excellent reusability and after 10 cycles the conversion of 1,6-hexanediol was above 81%.展开更多
A novel K2O and La2O3 promoted nickel catalyst supported on a-Al2O3 was prepared by co-impregnation method,and it exhibited higher activity and 6-aminocapronitrile selectivity than Ni/a-Al2O3 during the hydrogenation ...A novel K2O and La2O3 promoted nickel catalyst supported on a-Al2O3 was prepared by co-impregnation method,and it exhibited higher activity and 6-aminocapronitrile selectivity than Ni/a-Al2O3 during the hydrogenation of adiponitrile in the absence of ammonia,i.e.,K2O and La2O3 improved the performance of the nickel-based catalyst.展开更多
The utilization of CO2 as raw material for chemical synthesis has the potential for substantial economic and green benefits. Thermal decomposition of hexamethylene-1,6-dicarbamate （HDC） is a promising approach for i...The utilization of CO2 as raw material for chemical synthesis has the potential for substantial economic and green benefits. Thermal decomposition of hexamethylene-1,6-dicarbamate （HDC） is a promising approach for indirect utilization of CO2 to produce hexamethylene-1,6-diisocyanate （HDI）. In this work, a green route was developed for the synthesis of HD1 by thermal decomposition of HDC over Co3O4/ZSM-5 catalyst, using chlorobenzene as low boiling point solvent. Different metal oxide supported catalysts were prepared by incipient wetness impregnation （IWI）, PEG-additive （PEG） and deposition precipitation with ammonia evaporation （DP） methods. Their catalytic performances for the thermal decomposition of HDC were tested. The catalyst screening results showed that Co3O4/ZSM-525 catalysts prepared by different methods showed different performances in the order of Co3O4/ZSM-5 25（PEG） 〉 Co3O4/ZSM-525（IWI） 〉 Co3O4/ZSM-525（DP）. The physicochemical properties of Co3O4/ZSM- 52s catalyst were characterized by XRD, FTIR, N2 adsorption-desorption measurements, NH3-TPD and XPS. The superior catalytic performance of Co3O4/ZSM-52S（PEG） catalyst was attributed to its relative surface content of Co3 ＋, surface lattice oxygen content and total acidity. Under the optimized reaction conditions： 6.5% HDC concentration in chlorobenzene, 1 wt% Co3O4/ZSM-525（PEG） catalyst, 250℃ temperature, 2.5 h time, 800 ml.min 1 nitrogen flow rate and 1.0 MPa pressure, the HDC conversion and HDI yield could reach 100% and 92.8% respectively. The Co3O4/ZSM-525（PEG） catalyst could be facilely separated from the reaction mixture, and reused without degradation in catalytic performance. Furthermore, a possible reaction mechanism was proposed based on the physicochemical properties of the Co3O4/ZSM-5 25 catalysts.展开更多
A set of mono-and bimetallic（Zn-Co） supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N2adsorption-desorption m...A set of mono-and bimetallic（Zn-Co） supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co2O4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate（HDC） to hexamethylene–1,6–diisocyanate（HDI） were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.展开更多
Electrocatalytic nitrogen reduction reaction(NRR)is an environmentally friendly method for sustainable ammonia synthesis under ambient conditions.Searching for efficient NRR electrocatalysts with high activity and sel...Electrocatalytic nitrogen reduction reaction(NRR)is an environmentally friendly method for sustainable ammonia synthesis under ambient conditions.Searching for efficient NRR electrocatalysts with high activity and selectivity is currently urgent but remains great challenge.Herein,we systematically investigate the NRR catalytic activities of single and double transition metal atoms(TM=Fe,Co,Ni and Mo)anchored on g-C_(6)N_(6) monolayers by performing first-principles calculation.Based on the stability,activity,and selectivity analysis,Mo_(2)@g-C_(6)N_(6) monolayer is screened out as the most promising candidate for NRR.Further exploration of the reaction mechanism demonstrates that the Mo dimer anchored on g-C_(6)N_(6) can sufficiently activate and efficiently reduce the inert nitrogen molecule to ammonia through a preferred distal pathway with a particularly low limiting potential of -0.06 V.In addition,we find that Mo_(2)@g-C_(6)N_(6) has excellent NRR selectivity over the competing hydrogen evolution reaction,with the Faradaic efficiency being 100%.Our work not only predicts a kind of ideal NRR electrocatalyst but also encouraging more experimental and theoretical efforts to develop novel double-atom catalysts(DACs)for NRR.展开更多
The influences of catalyst concentration, reaction temperature and pressure, feed rate, and water content on the liquid phase oxidation of 2,6-diisopropylnaphthalene to 2,6-naphthalenedicarboxylic acid (2,6-NDCA)were ...The influences of catalyst concentration, reaction temperature and pressure, feed rate, and water content on the liquid phase oxidation of 2,6-diisopropylnaphthalene to 2,6-naphthalenedicarboxylic acid (2,6-NDCA)were studied in a 1 L titanium reactor using air as oxidant, acetic acid as solvent, and a Co-Mn-Br mixture as catalyst, and the optimum operation conditions were obtained in the experimental range.Meanwhile, the promotor effects of individual CO2 and Ni 2+ and their combined use on the activity of Co-Mn-Br catalyst were discussed.Based on the results of the batch experiments, a continuous process for making 2,6-NDCA was developed.The yield of 2,6-NDCA increased from 69% to 73% and the purity of 2,6-NDCA could be up to 95% with the increasing of reaction time.展开更多
文摘A new solid acid catalyst,SO4^2-/TiO2 modified with tin,was prepared using a sol-gel method and its physicochemical properties were revealed by nitrogen adsorption-desorption,X-ray powder diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,infrared spectroscopy of adsorbed pyridine,temperature-programmed desorption of ammonia and thermal gravimetric analysis.The structure,acidity and thermal stability of the SO4^2-/TiO2-SnO2 catalyst were studied.Incorporating tin enlarged the specific surface area and decreased crystallite size of the SO4^2-/TiO2 catalyst.The total acid sites of the modified catalyst increased and Bronsted acid strength remarkably increased with increasing tin content.The decomposition temperature of sulfate radical in the modified catalyst was 100 ℃ greater and its mass loss was more than twice that of the SO4^2-/TiO2 catalyst.The SO4^2-/TiO2-SnO2 catalyst was designed to synthesize 1,6-hexanediol diacrylate by esterification of 1,6-hexanediol with crylic acid.The yield of 1,6-hexanediol diacrylate exceeded 87% under the optimal reaction conditions：crylic acid to 1,6-hexanediol molar ratio = 3.5,catalyst loading = 7%,reaction temperature = 130 ℃ and reaction time = 3 h.The modified catalyst exhibited excellent reusability and after 10 cycles the conversion of 1,6-hexanediol was above 81%.
文摘A novel K2O and La2O3 promoted nickel catalyst supported on a-Al2O3 was prepared by co-impregnation method,and it exhibited higher activity and 6-aminocapronitrile selectivity than Ni/a-Al2O3 during the hydrogenation of adiponitrile in the absence of ammonia,i.e.,K2O and La2O3 improved the performance of the nickel-based catalyst.
基金National Natural Science Foundation of China(21476244 and 21406245)Youth Innovation Promotion Association CAS
文摘The utilization of CO2 as raw material for chemical synthesis has the potential for substantial economic and green benefits. Thermal decomposition of hexamethylene-1,6-dicarbamate （HDC） is a promising approach for indirect utilization of CO2 to produce hexamethylene-1,6-diisocyanate （HDI）. In this work, a green route was developed for the synthesis of HD1 by thermal decomposition of HDC over Co3O4/ZSM-5 catalyst, using chlorobenzene as low boiling point solvent. Different metal oxide supported catalysts were prepared by incipient wetness impregnation （IWI）, PEG-additive （PEG） and deposition precipitation with ammonia evaporation （DP） methods. Their catalytic performances for the thermal decomposition of HDC were tested. The catalyst screening results showed that Co3O4/ZSM-525 catalysts prepared by different methods showed different performances in the order of Co3O4/ZSM-5 25（PEG） 〉 Co3O4/ZSM-525（IWI） 〉 Co3O4/ZSM-525（DP）. The physicochemical properties of Co3O4/ZSM- 52s catalyst were characterized by XRD, FTIR, N2 adsorption-desorption measurements, NH3-TPD and XPS. The superior catalytic performance of Co3O4/ZSM-52S（PEG） catalyst was attributed to its relative surface content of Co3 ＋, surface lattice oxygen content and total acidity. Under the optimized reaction conditions： 6.5% HDC concentration in chlorobenzene, 1 wt% Co3O4/ZSM-525（PEG） catalyst, 250℃ temperature, 2.5 h time, 800 ml.min 1 nitrogen flow rate and 1.0 MPa pressure, the HDC conversion and HDI yield could reach 100% and 92.8% respectively. The Co3O4/ZSM-525（PEG） catalyst could be facilely separated from the reaction mixture, and reused without degradation in catalytic performance. Furthermore, a possible reaction mechanism was proposed based on the physicochemical properties of the Co3O4/ZSM-5 25 catalysts.
基金supported by National Natural Science Foundation of China(Nos.21476244 and 21406245)Youth Innovation Promotion Association CAS
文摘A set of mono-and bimetallic（Zn-Co） supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co2O4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate（HDC） to hexamethylene–1,6–diisocyanate（HDI） were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.
基金supported by the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(No.2020KJ008)the Natural Science Foundation of Tianjin(No.18JCQNJC76000)+3 种基金the College Students'Innovation and Entrepreneurship Training Program of Tianjin(No.202110065112)Science and Technology Research Project of Hubei Provincial De-partment of Education(No.D20212603)Hubei University of Arts and Science(Nos.2020kypytd002,XK2021024)China Scholarship Council.
文摘Electrocatalytic nitrogen reduction reaction(NRR)is an environmentally friendly method for sustainable ammonia synthesis under ambient conditions.Searching for efficient NRR electrocatalysts with high activity and selectivity is currently urgent but remains great challenge.Herein,we systematically investigate the NRR catalytic activities of single and double transition metal atoms(TM=Fe,Co,Ni and Mo)anchored on g-C_(6)N_(6) monolayers by performing first-principles calculation.Based on the stability,activity,and selectivity analysis,Mo_(2)@g-C_(6)N_(6) monolayer is screened out as the most promising candidate for NRR.Further exploration of the reaction mechanism demonstrates that the Mo dimer anchored on g-C_(6)N_(6) can sufficiently activate and efficiently reduce the inert nitrogen molecule to ammonia through a preferred distal pathway with a particularly low limiting potential of -0.06 V.In addition,we find that Mo_(2)@g-C_(6)N_(6) has excellent NRR selectivity over the competing hydrogen evolution reaction,with the Faradaic efficiency being 100%.Our work not only predicts a kind of ideal NRR electrocatalyst but also encouraging more experimental and theoretical efforts to develop novel double-atom catalysts(DACs)for NRR.
文摘The influences of catalyst concentration, reaction temperature and pressure, feed rate, and water content on the liquid phase oxidation of 2,6-diisopropylnaphthalene to 2,6-naphthalenedicarboxylic acid (2,6-NDCA)were studied in a 1 L titanium reactor using air as oxidant, acetic acid as solvent, and a Co-Mn-Br mixture as catalyst, and the optimum operation conditions were obtained in the experimental range.Meanwhile, the promotor effects of individual CO2 and Ni 2+ and their combined use on the activity of Co-Mn-Br catalyst were discussed.Based on the results of the batch experiments, a continuous process for making 2,6-NDCA was developed.The yield of 2,6-NDCA increased from 69% to 73% and the purity of 2,6-NDCA could be up to 95% with the increasing of reaction time.
