Monocolumn composite bucket foundation is a new type of offshore wind energy foundation.Its bearing characteristics under shallow bedrock conditions and complex geological conditions have not been extensively studied....Monocolumn composite bucket foundation is a new type of offshore wind energy foundation.Its bearing characteristics under shallow bedrock conditions and complex geological conditions have not been extensively studied.Therefore,to analyze its bearing characteristics under complex conditions-such as silty soil,chalky soil,and shallow bedrock-this paper employs finite element software to establish various soil combination scenarios.The load-displacement curves of the foundations under these scenarios are calculated to subsequently evaluate the horizontal ultimate bearing capacity.This study investigates the effects of shallow bedrock depth,the type of soil above the bedrock,the thickness of layered soil,and the quality of layered soil on the bearing characteristics of the monocolumn composite bucket foundation.Based on the principle of single-variable control,the ultimate bearing capacity characteristics of the foundation under different conditions are compared.The distribution of soil pressure inside and outside the bucket wall on the compressed side of the foundation,along with the plastic strain of the soil at the base of the foundation,is also analyzed.In conclusion,shallow bedrock somewhat reduces foundation bearing capacity.Under shallow bedrock conditions,the degree of influence on foundation bearing capacity characteristics can considerably vary on different upper soils.The thickness of each soil layer and the depth to bedrock in stratified soils also affect the bearing capacity of the foundation.The findings of this paper provide a theoretical reference for related foundation design and construction.In practice,the bearing performance of the foundation can be enhanced by improvingthe soil quality in the bucket,adjusting the penetration depth,adjusting the percentage of different types of soil layers in the bucket,and applying other technical construction methods.展开更多
The problems noted in the structures built on wooden foundation piles in a lake environment required various works to strengthen over time.This work mainly consists of the recovery of the foundation mass by micropiles...The problems noted in the structures built on wooden foundation piles in a lake environment required various works to strengthen over time.This work mainly consists of the recovery of the foundation mass by micropiles due to the increase in loads on the structures,or the recovery of the foundation mass by injection,which is carried out when voids form between the ground and the wooden foundation elements.The high cost of foundation reinforcement methods led the National Agency for the Development of Tourist Heritage in Benin(ANPT)to replace the wooden foundation piles with reinforced concrete piles in the implementation of the project“reinventing the lakeside city of Ganvié”.This article presents an artisanal technology for the creation of reinforced concrete foundation piles in a lake environment.On-site examples made it possible to evaluate the performance of this artisanal implementation technique.The installation of these piles is carried out following manual drilling,followed by the installation of reinforcement and the pouring of concrete on site.The implementation of reinforced concrete foundation piles in place of the wooden ones studied in this article only impacted the infrastructure of the homes of the lakeside town of Ganviébut not the superstructure,which preserved the old traditional wooden architecture and thatched roofs.Thus,the ambition to move this city of Ganviéfrom the stage of a lake village to that of a floating city is very successful.This will contribute to improving the environment and living conditions of the populations and will promote economic development through tourism.展开更多
On the afternoon of May 3Oth,the parallel forum"Strengthening the Judicial Foundations of Shared Values of Mankind,"as a component of the 4th Dialogue on Exchanges and Mutual Learning among Civilisations,was...On the afternoon of May 3Oth,the parallel forum"Strengthening the Judicial Foundations of Shared Values of Mankind,"as a component of the 4th Dialogue on Exchanges and Mutual Learning among Civilisations,was held in Dunhuang.More than 50 experts and scholars from nine countries,including China,Germany and the United Kingdom,engaged in in-depth discussions on the topic.展开更多
In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of th...In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of the post-expanded arm grouting pile was explored through model tests.The test results indicate that the post-expanded arm grouting pile can increase the contact area between the pile and soil,and can improve the strength of the soil.The horizontal bearing capacity of the post-expanded arm grouting pile was approximately 3 times that of the conventional pile.It also shows that the larger the plate diameter ratio or grouting volume,the higher the horizontal bearing capacity of the post-expanded arm grouting pile.The maximum bending moment of the post-expanded arm grouting pile was located at the pile plate,and the displacement zero point of the new pile was higher than that of the conventional pile.The soil resistance at the pile plate was significantly higher than that of conventional piles,indicating that the pile plate effectively enhances the soil resistance.The improved p-y curve model and horizontal bearing capacity calculation method for the post-expanded arm grouting pile were proposed by considering the pile plate diameter factor.This method was finally verified by experimental results.The results of this study can provide a reference for calculating the horizontal bearing capacity of the post-expanded arm grouting pile.展开更多
The coastal region of Fujian contains numerous existing stone masonry structures,many of which are constructed on soft soil sites.Previous studies have shown that the soil-structure interaction(SSI)effect on soft soil...The coastal region of Fujian contains numerous existing stone masonry structures,many of which are constructed on soft soil sites.Previous studies have shown that the soil-structure interaction(SSI)effect on soft soil foundations can prolong the structure's natural vibration period and enhance its seismic response.We develops a soilstructure interaction system model and a comparative rigid foundation model using the finite element software LS-DYNA to investigate the impact of SSI on the dynamic characteristics and seismic response of stone structures.The results indicate that the SSI effect alters stone structures'dynamic properties and seismic response.This alteration is evident in the extended natural vibration period,which reduces overall stiffness,increases interstory displacement angles,and slightly decreases the acceleration response.Under both SSI and FIX systems,the structural failure mode is characterized by the external collapse of the second-story stone walls,which causes the roof stone slabs to lose support and fall,leading to overall collapse.The FIX system demonstrates better structural integrity and stability with slower crack development.In contrast,the SSI system exhibits cracks that appear earlier and develop more rapidly,causing more severe damage.The research findings provide a theoretical basis for the seismic reinforcement of existing stone structures on soft soil foundations.展开更多
Clay deposits typically exhibit significant degrees of heterogeneity and anisotropy in their strength and stiffness properties.Such non-monotonic responses can significantly impact the stability analysis and design of...Clay deposits typically exhibit significant degrees of heterogeneity and anisotropy in their strength and stiffness properties.Such non-monotonic responses can significantly impact the stability analysis and design of overlying shallow foundations.In this study,the undrained bearing capacity of shallow foundations resting on inhomogeneous and anisotropic clay layers subjected to oblique-eccentric combined loading is investigated through a comprehensive series of finite element limit analysis(FELA)based on the well-established lower-bound theorem and second-order cone programming(SOCP).The heterogeneity of normally consolidated(NC)clays is simulated by adopting a well-known general model of undrained shear strength increasing linearly with depth.In contrast,for overconsolidated(OC)clays,the variation of undrained shear strength with depth is considered to follow a bilinear trend.Furthermore,the inherent anisotropy is accounted for by adopting different values of undrained shear strength along different directions within the soil medium,employing an iterative-based algorithm.The results of numerical simulations are utilized to investigate the influences of natural soil heterogeneity and inherent anisotropy on the ultimate bearing capacity,failure envelope,and failure mechanism of shallow foundations subjected to the various combinations of vertical-horizontal(V-H)and vertical-moment(V-M)loads.展开更多
To study the dynamic response rules of pile foundations of mega-bridges over faults in strong seismic areas,a finite element model of the pile foundation-soil-fault interaction of the Haiwen Bridge is established.The ...To study the dynamic response rules of pile foundations of mega-bridges over faults in strong seismic areas,a finite element model of the pile foundation-soil-fault interaction of the Haiwen Bridge is established.The 0.2-0.6 g peak acceleration of the 5010 seismic waves is input to study the effect of the seismic wave of different intensities and the distance changes between the fault and the pile foundation on the dynamic response of the pile body.The results show that the soil layer covering the bedrock amplifies the peak pile acceleration,and the amplifying effect decreases with increasing seismic wave intensity.However,bedrock has less of an effect on peak acceleration.The relative pile displacement shows the mechanical properties of elastic long piles.The pile foundation generates a large bending moment at the bedrock face and the upper soil layer interface,and a large shear force at the pile top and the soft-hard soil body interface.The relative displacement,bending,and shear bearing characteristics of the pile foundations on the upper and lower plates of the fault are significantly different.The deformation characteristics are affected by faults in a region ten times the pile diameter.Analysis of the dynamic p-y curves shows that the soil resistance on the pile side of the lower plate at the same depth is greater than that of the upper plate.Sensitivity of the dynamic response of pile foundations on either side of the fault to the effects of seismic intensity and distance between the pile foundation and the fault:distance l seismic intensity q.展开更多
The feasibility of constructing shallow foundations on saturated sands remains uncertain.Seismic design standards simply stipulate that geotechnical investigations for a shallow foundation on such soils shall be condu...The feasibility of constructing shallow foundations on saturated sands remains uncertain.Seismic design standards simply stipulate that geotechnical investigations for a shallow foundation on such soils shall be conducted to mitigate the effects of the liquefaction hazard.This study investigates the seismic behavior of strip foundations on typical two-layered soil profiles-a natural loose sand layer supported by a dense sand layer.Coupled nonlinear dynamic analyses have been conducted to calculate response parameters,including seismic settlement,the acceleration response on the ground surface,and excess pore pressure beneath strip foundations.A novel liquefaction potential index(LPI_(footing)),based on excess pore pressure ratios across a given region of soil mass beneath footings is introduced to classify liquefaction severity into three distinct levels:minor,moderate,and severe.To validate the proposed LPI_(footing),the foundation settlement is evaluated for the different liquefaction potential classes.A classification tree model has been grown to predict liquefaction susceptibility,utilizing various input variables,including earthquake intensity on the ground surface,foundation pressure,sand permeability,and top layer thickness.Moreover,a nonlinear regression function has been established to map LPI_(footing) in relation to these input predictors.The models have been constructed using a substantial dataset comprising 13,824 excess pore pressure ratio time histories.The performance of the developed models has been examined using various methods,including the 10-fold cross-validation method.The predictive capability of the tree also has been validated through existing experimental studies.The results indicate that the classification tree is not only interpretable but also highly predictive,with a testing accuracy level of 78.1%.The decision tree provides valuable insights for engineers assessing liquefaction potential beneath strip foundations.展开更多
Under the combination of currents and waves, seabed scour occurs around offshore wind turbine foundations, which affects the stability and safe operation of offshore wind turbines. In this study, physical model experi...Under the combination of currents and waves, seabed scour occurs around offshore wind turbine foundations, which affects the stability and safe operation of offshore wind turbines. In this study, physical model experiments under unidirectional flow, bidirectional flow, and wave-current interactions with different flow directions around the pile group foundation were first conducted to investigate the development of scour around the pile group foundation.Additionally, a three-dimensional scour numerical model was established via the open-source software REEF3D to simulate the flow field and scour around the prototype-scale foundation. The impact of flow on scour was discussed.Under unidirectional flow, scour equilibrium was reached more quickly, with the maximum scour depth reaching approximately 1.2 times the pile diameter and the extent of the scour hole spanning about 4.9 times the pile diameter.Compared with those under unidirectional flow, the scour depths under combinations of currents and waves, as well as bidirectional flow, were slightly smaller. However, the morphology of scour holes was more uniform and symmetrical. The numerical simulation results show good agreement with the experimental data, demonstrating the impact of varying flow directions on the velocity distribution around the foundation, the morphology of scour holes, and the location of the maximum scour depth.展开更多
In recent years,offshore wind turbines have rap-idly developed,and many pile foundations installed earlier are now approaching decommissioning.Thus,the efficient removal of pile foundations has become a critical issue...In recent years,offshore wind turbines have rap-idly developed,and many pile foundations installed earlier are now approaching decommissioning.Thus,the efficient removal of pile foundations has become a critical issue for the sustainable development of offshore wind energy.To ad-dress this issue,this paper systematically investigates three methods for the recovery of pile foundations using physical model experiments:water injection+lifting,air injection+lifting,and air retention+water injection.The experimental results show that the water injection+lifting method exhibits remarkable advantages in recovering large-diameter and in-clined pile foundations;however,realigning inclined piles during recovery remains challenging,and a risk of pile over-turning exists.The air injection+lifting method proves ef-fective for realigning inclined piles but presents a risk of air expulsion failure,which may affect the continuity and stabil-ity of the recovery process.By contrast,the air retention+water injection method combines the characteristics of water injection and air injection techniques,effectively avoiding air expulsion failure and exhibiting pronounced displacement jumps during pile uplift.These findings provide a valuable reference for future decommissioning practices of offshore wind pile foundations,offer important engineering applica-tion value,and contribute positively to the sustainable devel-opment of the offshore wind industry.展开更多
To analyze the band gap characteristics of phononic crystals,a two-dimensional phononic crystal plate model with an elastic foundation was first established.The plane wave expansion method was used to compute the disp...To analyze the band gap characteristics of phononic crystals,a two-dimensional phononic crystal plate model with an elastic foundation was first established.The plane wave expansion method was used to compute the dispersion curves of this phononic crystal model,and the results were compared with those from the finite element method to verify their accuracy.Subsequently,a parameter study explored the effects of the elastic foundation coeffi-cient and coverage ratio on the band gap.The results indicate that as the coverage ratio of the elastic foundation increases,the band gap significantly expands,reaching its maximum value at 100%coverage.Additionally,as the elastic foundation stiffness increases,the band gap gradually widens and converges toward fixed boundary conditions.The study also investigated the band gap of phononic crystal plates with defects,finding that the vibrational energy concentrates at the defect unit cell.Furthermore,the defect band frequency can be effectively modulated by adjusting the coefficient of the elastic foundation,providing a theoretical basis for achieving efficient energy conversion.展开更多
Four different types of film-forming agents were added to the foundation formulations,and their effects on the makeup-holding properties of the foundations on human facial skin were determined by Visia-CR.The study sh...Four different types of film-forming agents were added to the foundation formulations,and their effects on the makeup-holding properties of the foundations on human facial skin were determined by Visia-CR.The study showed that there was a significant difference between the sample group with film-forming agent and the blank control group,indicating that the addition of film-forming agent had an effect on the makeup-holding performance of the foundation;the makeup-holding effect of the foundation formulated with trimethylsiloxysilicate or(acrylates/dimethicone copolymer,cyclopentasiloxane)was better than that of the foundation formulated with polymethylsilsesquioxane or VP/hexadecene copolymer.This experiment is of guidance significance for the formulation design of long-lasting foundation.展开更多
The Euler-Bernoulli(E-B)beam theory is combined with Green-Lindsay's(G-L)generalized thermoelasticity theory to analyze the vibration of microbeams.The frequency control equation,based on the two-parameter Winkler...The Euler-Bernoulli(E-B)beam theory is combined with Green-Lindsay's(G-L)generalized thermoelasticity theory to analyze the vibration of microbeams.The frequency control equation,based on the two-parameter Winkler-Pasternak elastic foundation for simply-supported microbeams,is presented.This study investigates the effects of the side-to-thickness ratio and relaxation time parameters on the vibrational natural frequency of thermoelastic microbeam resonators.The frequencies derived from the present model are compared with those from Lord and Shulman's(L-S)theory.The fourthorder solutions for natural vibration frequencies are graphically displayed for comparison.Therefore,attention should be paid to the use of effective foundations to prevent microbeam damage caused by contraction and expansion problems caused by high temperatures.展开更多
In this paper, the effects of the stiffness of circular, square and strip foundation structures and bonding effects were analyzed. Presented analysis was oriented on the influence of stiffness system ＂foundation--sub...In this paper, the effects of the stiffness of circular, square and strip foundation structures and bonding effects were analyzed. Presented analysis was oriented on the influence of stiffness system ＂foundation--subsoil＂ and bonds （bi-directional bond and one-directional bond with and without friction）. The results of numerical calculations have proved that the relative stiffness of system ＂foundation--subsoil＂ affect considerably the value and the distribution of contact stresses （vertical normal and shear stresses） in the foundation gap and value of the displacements （settlement, deflection and relative deformations） of foundation. From the numerical point of view, this problem was solved by deformation variant of the FEM （finite element method）. The numerically obtained results were presented in the graphical and tabular forms. Obtained results were qualitative and quantitative compared with one another. From the calculation results it is obvious that relative stiffness of the system ＂foundation structure--subsoil＂ substantially affects distribution of contact stresses in the foundation subsoil and displacements （settlement, deflection and relative deformations, flexibility） of foundation. In the case of flexible foundations, the bond on the contact surfaces must be considered during the calculation. On the other hand, the effects of friction on the contact surface between the foundation and subsoil affect the distribution of contact stresses and deformations only to smaller extent.展开更多
Although the load applied to pile foundations is usually a combination of vertical and lateral components,there have been few investigations on the behavior of piles subjected to combined loadings.Those few studies le...Although the load applied to pile foundations is usually a combination of vertical and lateral components,there have been few investigations on the behavior of piles subjected to combined loadings.Those few studies led to inconsistent results with regard to the effects of vertical loads on the lateral response of piles.A series of three-dimensional(3D) finite differences analyses is conducted to evaluate the influence of vertical loads on the lateral performance of pile foundations.Three idealized sandy and clayey soil profiles are considered:a homogeneous soil layer,a layer with modulus proportional to depth,and two-layered strata.The pile material is modeled as linearly elastic,while the soil is idealized using the Mohr-Coulomb constitutive model with a non-associated flow rule.In order to confirm the findings of this study,soils in some cases are further modeled using more sophisticated models(i.e.CYsoil model for sandy soils and modified Cam-Clay(MCC) model for clayey soils).Numerical results showed that the lateral resistance of the piles does not appear to vary considerably with the vertical load in sandy soil especially at the loosest state.However,the presence of a vertical load on a pile embedded in homogeneous or inhomogeneous clay is detrimental to its lateral capacity,and it is unconservative to design piles in clays assuming that there is no interaction between vertical and lateral loads.Moreover,the current results indicate that the effect of vertical loads on the lateral response of piles embedded in twolayered strata depends on the characteristics of soil not only surrounding the piles but also located beneath their tips.展开更多
Geotechnical engineering deals with materials（e.g. soil and rock） that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these mate...Geotechnical engineering deals with materials（e.g. soil and rock） that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence（AI） is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.展开更多
Semi-deep foundations socketed in rocks are considered to be a viable option for the foundations in the presence of heavy load imposed by high-rise structures, due to the low settlement and high bearing capacity. In t...Semi-deep foundations socketed in rocks are considered to be a viable option for the foundations in the presence of heavy load imposed by high-rise structures, due to the low settlement and high bearing capacity. In the optimum design of semi-deep foundations, prediction of the shaft bearing capacity, rs, of foundations socketed in rocks is thus critically important. In this study, the unconfined compressive strength(UCS), qu, has been applied in order to investigate the shaft bearing capacity. For this, a database of 106 full-scale load tests is compiled with UCS values of surrounding rocks, in which 34 tests with rock quality designation(RQD), and 5 tests with rock mass rating(RMR). The bearing rocks for semi-deep foundations include limestone, mudstone, siltstone, shale, granite, tuff, granodiorite, claystone, sandstone, phyllite, schist, and greywacke. Using the database, the applicability and accuracy of the existing empirical methods are evaluated and new relations are derived between the shaft bearing capacity and UCS based on the types of rocks. Moreover, a general equation in case of unknown rock types is proposed and it is verified by another set of data. Since rock-socketed shafts are supported by rock mass(not intact rock), a reduction factor for the compressive strength is suggested and verified in which the effect of discontinuities is considered using the modified UCS, qu(modified), based upon RMR and RQD in order to take into account the effect of the rock mass properties.展开更多
Bi-directional static loading test adopting load cells is widely used around the world at present,with increase in diameter and length of deep foundations.In this paper,a new simple conversion method to predict the eq...Bi-directional static loading test adopting load cells is widely used around the world at present,with increase in diameter and length of deep foundations.In this paper,a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism.The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant.Some new load cells,test procedure,and construction technology were adopted based on the applications to different deep foundations,which could enlarge the application scopes of bi-directional loading test.A new type of bi-directional loading test for pipe pile was conducted,in which the load cell was installed and loaded after the pipe pile with special connector has been set up.Unlike the conventional bi-directional loading test,the load cell can be reused and shows an evident economic benefit.展开更多
This paper presents a reliability analysis of the pseudo-static seismic bearing capacity of a strip foundation using the limit equilibrium theory. The first-order reliability method(FORM) is employed to calculate the ...This paper presents a reliability analysis of the pseudo-static seismic bearing capacity of a strip foundation using the limit equilibrium theory. The first-order reliability method(FORM) is employed to calculate the reliability index. The response surface methodology(RSM) is used to assess the Hasofer e Lind reliability index and then it is optimized using a genetic algorithm(GA). The random variables used are the soil shear strength parameters and the seismic coefficients(khand kv). Two assumptions(normal and non-normal distribution) are used for the random variables. The assumption of uncorrelated variables was found to be conservative in comparison to that of negatively correlated soil shear strength parameters. The assumption of non-normal distribution for the random variables can induce a negative effect on the reliability index of the practical range of the seismic bearing capacity.展开更多
文摘Monocolumn composite bucket foundation is a new type of offshore wind energy foundation.Its bearing characteristics under shallow bedrock conditions and complex geological conditions have not been extensively studied.Therefore,to analyze its bearing characteristics under complex conditions-such as silty soil,chalky soil,and shallow bedrock-this paper employs finite element software to establish various soil combination scenarios.The load-displacement curves of the foundations under these scenarios are calculated to subsequently evaluate the horizontal ultimate bearing capacity.This study investigates the effects of shallow bedrock depth,the type of soil above the bedrock,the thickness of layered soil,and the quality of layered soil on the bearing characteristics of the monocolumn composite bucket foundation.Based on the principle of single-variable control,the ultimate bearing capacity characteristics of the foundation under different conditions are compared.The distribution of soil pressure inside and outside the bucket wall on the compressed side of the foundation,along with the plastic strain of the soil at the base of the foundation,is also analyzed.In conclusion,shallow bedrock somewhat reduces foundation bearing capacity.Under shallow bedrock conditions,the degree of influence on foundation bearing capacity characteristics can considerably vary on different upper soils.The thickness of each soil layer and the depth to bedrock in stratified soils also affect the bearing capacity of the foundation.The findings of this paper provide a theoretical reference for related foundation design and construction.In practice,the bearing performance of the foundation can be enhanced by improvingthe soil quality in the bucket,adjusting the penetration depth,adjusting the percentage of different types of soil layers in the bucket,and applying other technical construction methods.
文摘The problems noted in the structures built on wooden foundation piles in a lake environment required various works to strengthen over time.This work mainly consists of the recovery of the foundation mass by micropiles due to the increase in loads on the structures,or the recovery of the foundation mass by injection,which is carried out when voids form between the ground and the wooden foundation elements.The high cost of foundation reinforcement methods led the National Agency for the Development of Tourist Heritage in Benin(ANPT)to replace the wooden foundation piles with reinforced concrete piles in the implementation of the project“reinventing the lakeside city of Ganvié”.This article presents an artisanal technology for the creation of reinforced concrete foundation piles in a lake environment.On-site examples made it possible to evaluate the performance of this artisanal implementation technique.The installation of these piles is carried out following manual drilling,followed by the installation of reinforcement and the pouring of concrete on site.The implementation of reinforced concrete foundation piles in place of the wooden ones studied in this article only impacted the infrastructure of the homes of the lakeside town of Ganviébut not the superstructure,which preserved the old traditional wooden architecture and thatched roofs.Thus,the ambition to move this city of Ganviéfrom the stage of a lake village to that of a floating city is very successful.This will contribute to improving the environment and living conditions of the populations and will promote economic development through tourism.
文摘On the afternoon of May 3Oth,the parallel forum"Strengthening the Judicial Foundations of Shared Values of Mankind,"as a component of the 4th Dialogue on Exchanges and Mutual Learning among Civilisations,was held in Dunhuang.More than 50 experts and scholars from nine countries,including China,Germany and the United Kingdom,engaged in in-depth discussions on the topic.
基金supported by the National Natural Science Foundation of China(Grant Nos.52208333 and 52378328)China Communications Construction Company Ltd.(Grant No.2023-ZJKJ-01).
文摘In order to effectively improve the horizontal bearing capacity of pile foundations,this study proposes post-expanded arm grouting technology and associated pile foundations.The horizontal bearing characteristic of the post-expanded arm grouting pile was explored through model tests.The test results indicate that the post-expanded arm grouting pile can increase the contact area between the pile and soil,and can improve the strength of the soil.The horizontal bearing capacity of the post-expanded arm grouting pile was approximately 3 times that of the conventional pile.It also shows that the larger the plate diameter ratio or grouting volume,the higher the horizontal bearing capacity of the post-expanded arm grouting pile.The maximum bending moment of the post-expanded arm grouting pile was located at the pile plate,and the displacement zero point of the new pile was higher than that of the conventional pile.The soil resistance at the pile plate was significantly higher than that of conventional piles,indicating that the pile plate effectively enhances the soil resistance.The improved p-y curve model and horizontal bearing capacity calculation method for the post-expanded arm grouting pile were proposed by considering the pile plate diameter factor.This method was finally verified by experimental results.The results of this study can provide a reference for calculating the horizontal bearing capacity of the post-expanded arm grouting pile.
基金jointly sponsored by Fujian Province construction science and technology development research project(2023-B-07,2023-K-47,2022-K-118)。
文摘The coastal region of Fujian contains numerous existing stone masonry structures,many of which are constructed on soft soil sites.Previous studies have shown that the soil-structure interaction(SSI)effect on soft soil foundations can prolong the structure's natural vibration period and enhance its seismic response.We develops a soilstructure interaction system model and a comparative rigid foundation model using the finite element software LS-DYNA to investigate the impact of SSI on the dynamic characteristics and seismic response of stone structures.The results indicate that the SSI effect alters stone structures'dynamic properties and seismic response.This alteration is evident in the extended natural vibration period,which reduces overall stiffness,increases interstory displacement angles,and slightly decreases the acceleration response.Under both SSI and FIX systems,the structural failure mode is characterized by the external collapse of the second-story stone walls,which causes the roof stone slabs to lose support and fall,leading to overall collapse.The FIX system demonstrates better structural integrity and stability with slower crack development.In contrast,the SSI system exhibits cracks that appear earlier and develop more rapidly,causing more severe damage.The research findings provide a theoretical basis for the seismic reinforcement of existing stone structures on soft soil foundations.
文摘Clay deposits typically exhibit significant degrees of heterogeneity and anisotropy in their strength and stiffness properties.Such non-monotonic responses can significantly impact the stability analysis and design of overlying shallow foundations.In this study,the undrained bearing capacity of shallow foundations resting on inhomogeneous and anisotropic clay layers subjected to oblique-eccentric combined loading is investigated through a comprehensive series of finite element limit analysis(FELA)based on the well-established lower-bound theorem and second-order cone programming(SOCP).The heterogeneity of normally consolidated(NC)clays is simulated by adopting a well-known general model of undrained shear strength increasing linearly with depth.In contrast,for overconsolidated(OC)clays,the variation of undrained shear strength with depth is considered to follow a bilinear trend.Furthermore,the inherent anisotropy is accounted for by adopting different values of undrained shear strength along different directions within the soil medium,employing an iterative-based algorithm.The results of numerical simulations are utilized to investigate the influences of natural soil heterogeneity and inherent anisotropy on the ultimate bearing capacity,failure envelope,and failure mechanism of shallow foundations subjected to the various combinations of vertical-horizontal(V-H)and vertical-moment(V-M)loads.
基金funded by National Natural Science Foundation of China Projects(51708040)Hainan Provincial Transportation Science and Technology Project(HNZXY2015-045R)Changan University Central University Basic Research Business Fund Special Funds(No.300102218115).
文摘To study the dynamic response rules of pile foundations of mega-bridges over faults in strong seismic areas,a finite element model of the pile foundation-soil-fault interaction of the Haiwen Bridge is established.The 0.2-0.6 g peak acceleration of the 5010 seismic waves is input to study the effect of the seismic wave of different intensities and the distance changes between the fault and the pile foundation on the dynamic response of the pile body.The results show that the soil layer covering the bedrock amplifies the peak pile acceleration,and the amplifying effect decreases with increasing seismic wave intensity.However,bedrock has less of an effect on peak acceleration.The relative pile displacement shows the mechanical properties of elastic long piles.The pile foundation generates a large bending moment at the bedrock face and the upper soil layer interface,and a large shear force at the pile top and the soft-hard soil body interface.The relative displacement,bending,and shear bearing characteristics of the pile foundations on the upper and lower plates of the fault are significantly different.The deformation characteristics are affected by faults in a region ten times the pile diameter.Analysis of the dynamic p-y curves shows that the soil resistance on the pile side of the lower plate at the same depth is greater than that of the upper plate.Sensitivity of the dynamic response of pile foundations on either side of the fault to the effects of seismic intensity and distance between the pile foundation and the fault:distance l seismic intensity q.
文摘The feasibility of constructing shallow foundations on saturated sands remains uncertain.Seismic design standards simply stipulate that geotechnical investigations for a shallow foundation on such soils shall be conducted to mitigate the effects of the liquefaction hazard.This study investigates the seismic behavior of strip foundations on typical two-layered soil profiles-a natural loose sand layer supported by a dense sand layer.Coupled nonlinear dynamic analyses have been conducted to calculate response parameters,including seismic settlement,the acceleration response on the ground surface,and excess pore pressure beneath strip foundations.A novel liquefaction potential index(LPI_(footing)),based on excess pore pressure ratios across a given region of soil mass beneath footings is introduced to classify liquefaction severity into three distinct levels:minor,moderate,and severe.To validate the proposed LPI_(footing),the foundation settlement is evaluated for the different liquefaction potential classes.A classification tree model has been grown to predict liquefaction susceptibility,utilizing various input variables,including earthquake intensity on the ground surface,foundation pressure,sand permeability,and top layer thickness.Moreover,a nonlinear regression function has been established to map LPI_(footing) in relation to these input predictors.The models have been constructed using a substantial dataset comprising 13,824 excess pore pressure ratio time histories.The performance of the developed models has been examined using various methods,including the 10-fold cross-validation method.The predictive capability of the tree also has been validated through existing experimental studies.The results indicate that the classification tree is not only interpretable but also highly predictive,with a testing accuracy level of 78.1%.The decision tree provides valuable insights for engineers assessing liquefaction potential beneath strip foundations.
基金financially supported by the National Key Research and Development Program of China (Grant No. 2021YFB2601100)the National Natural Science Foundation of China (Grant No. 51979190)。
文摘Under the combination of currents and waves, seabed scour occurs around offshore wind turbine foundations, which affects the stability and safe operation of offshore wind turbines. In this study, physical model experiments under unidirectional flow, bidirectional flow, and wave-current interactions with different flow directions around the pile group foundation were first conducted to investigate the development of scour around the pile group foundation.Additionally, a three-dimensional scour numerical model was established via the open-source software REEF3D to simulate the flow field and scour around the prototype-scale foundation. The impact of flow on scour was discussed.Under unidirectional flow, scour equilibrium was reached more quickly, with the maximum scour depth reaching approximately 1.2 times the pile diameter and the extent of the scour hole spanning about 4.9 times the pile diameter.Compared with those under unidirectional flow, the scour depths under combinations of currents and waves, as well as bidirectional flow, were slightly smaller. However, the morphology of scour holes was more uniform and symmetrical. The numerical simulation results show good agreement with the experimental data, demonstrating the impact of varying flow directions on the velocity distribution around the foundation, the morphology of scour holes, and the location of the maximum scour depth.
基金The National Natural Science Foundation of China (No. 52171274)。
文摘In recent years,offshore wind turbines have rap-idly developed,and many pile foundations installed earlier are now approaching decommissioning.Thus,the efficient removal of pile foundations has become a critical issue for the sustainable development of offshore wind energy.To ad-dress this issue,this paper systematically investigates three methods for the recovery of pile foundations using physical model experiments:water injection+lifting,air injection+lifting,and air retention+water injection.The experimental results show that the water injection+lifting method exhibits remarkable advantages in recovering large-diameter and in-clined pile foundations;however,realigning inclined piles during recovery remains challenging,and a risk of pile over-turning exists.The air injection+lifting method proves ef-fective for realigning inclined piles but presents a risk of air expulsion failure,which may affect the continuity and stabil-ity of the recovery process.By contrast,the air retention+water injection method combines the characteristics of water injection and air injection techniques,effectively avoiding air expulsion failure and exhibiting pronounced displacement jumps during pile uplift.These findings provide a valuable reference for future decommissioning practices of offshore wind pile foundations,offer important engineering applica-tion value,and contribute positively to the sustainable devel-opment of the offshore wind industry.
基金The National Natural Science Foundation of China(No.12002086)。
文摘To analyze the band gap characteristics of phononic crystals,a two-dimensional phononic crystal plate model with an elastic foundation was first established.The plane wave expansion method was used to compute the dispersion curves of this phononic crystal model,and the results were compared with those from the finite element method to verify their accuracy.Subsequently,a parameter study explored the effects of the elastic foundation coeffi-cient and coverage ratio on the band gap.The results indicate that as the coverage ratio of the elastic foundation increases,the band gap significantly expands,reaching its maximum value at 100%coverage.Additionally,as the elastic foundation stiffness increases,the band gap gradually widens and converges toward fixed boundary conditions.The study also investigated the band gap of phononic crystal plates with defects,finding that the vibrational energy concentrates at the defect unit cell.Furthermore,the defect band frequency can be effectively modulated by adjusting the coefficient of the elastic foundation,providing a theoretical basis for achieving efficient energy conversion.
文摘Four different types of film-forming agents were added to the foundation formulations,and their effects on the makeup-holding properties of the foundations on human facial skin were determined by Visia-CR.The study showed that there was a significant difference between the sample group with film-forming agent and the blank control group,indicating that the addition of film-forming agent had an effect on the makeup-holding performance of the foundation;the makeup-holding effect of the foundation formulated with trimethylsiloxysilicate or(acrylates/dimethicone copolymer,cyclopentasiloxane)was better than that of the foundation formulated with polymethylsilsesquioxane or VP/hexadecene copolymer.This experiment is of guidance significance for the formulation design of long-lasting foundation.
基金the Deanship of Research and Graduate Studies at King Khalid University for funding this work through a large research project(No.RGP2/80/45)。
文摘The Euler-Bernoulli(E-B)beam theory is combined with Green-Lindsay's(G-L)generalized thermoelasticity theory to analyze the vibration of microbeams.The frequency control equation,based on the two-parameter Winkler-Pasternak elastic foundation for simply-supported microbeams,is presented.This study investigates the effects of the side-to-thickness ratio and relaxation time parameters on the vibrational natural frequency of thermoelastic microbeam resonators.The frequencies derived from the present model are compared with those from Lord and Shulman's(L-S)theory.The fourthorder solutions for natural vibration frequencies are graphically displayed for comparison.Therefore,attention should be paid to the use of effective foundations to prevent microbeam damage caused by contraction and expansion problems caused by high temperatures.
文摘In this paper, the effects of the stiffness of circular, square and strip foundation structures and bonding effects were analyzed. Presented analysis was oriented on the influence of stiffness system ＂foundation--subsoil＂ and bonds （bi-directional bond and one-directional bond with and without friction）. The results of numerical calculations have proved that the relative stiffness of system ＂foundation--subsoil＂ affect considerably the value and the distribution of contact stresses （vertical normal and shear stresses） in the foundation gap and value of the displacements （settlement, deflection and relative deformations） of foundation. From the numerical point of view, this problem was solved by deformation variant of the FEM （finite element method）. The numerically obtained results were presented in the graphical and tabular forms. Obtained results were qualitative and quantitative compared with one another. From the calculation results it is obvious that relative stiffness of the system ＂foundation structure--subsoil＂ substantially affects distribution of contact stresses in the foundation subsoil and displacements （settlement, deflection and relative deformations, flexibility） of foundation. In the case of flexible foundations, the bond on the contact surfaces must be considered during the calculation. On the other hand, the effects of friction on the contact surface between the foundation and subsoil affect the distribution of contact stresses and deformations only to smaller extent.
文摘Although the load applied to pile foundations is usually a combination of vertical and lateral components,there have been few investigations on the behavior of piles subjected to combined loadings.Those few studies led to inconsistent results with regard to the effects of vertical loads on the lateral response of piles.A series of three-dimensional(3D) finite differences analyses is conducted to evaluate the influence of vertical loads on the lateral performance of pile foundations.Three idealized sandy and clayey soil profiles are considered:a homogeneous soil layer,a layer with modulus proportional to depth,and two-layered strata.The pile material is modeled as linearly elastic,while the soil is idealized using the Mohr-Coulomb constitutive model with a non-associated flow rule.In order to confirm the findings of this study,soils in some cases are further modeled using more sophisticated models(i.e.CYsoil model for sandy soils and modified Cam-Clay(MCC) model for clayey soils).Numerical results showed that the lateral resistance of the piles does not appear to vary considerably with the vertical load in sandy soil especially at the loosest state.However,the presence of a vertical load on a pile embedded in homogeneous or inhomogeneous clay is detrimental to its lateral capacity,and it is unconservative to design piles in clays assuming that there is no interaction between vertical and lateral loads.Moreover,the current results indicate that the effect of vertical loads on the lateral response of piles embedded in twolayered strata depends on the characteristics of soil not only surrounding the piles but also located beneath their tips.
文摘Geotechnical engineering deals with materials（e.g. soil and rock） that, by their very nature, exhibit varied and uncertain behavior due to the imprecise physical processes associated with the formation of these materials. Modeling the behavior of such materials in geotechnical engineering applications is complex and sometimes beyond the ability of most traditional forms of physically-based engineering methods. Artificial intelligence（AI） is becoming more popular and particularly amenable to modeling the complex behavior of most geotechnical engineering applications because it has demonstrated superior predictive ability compared to traditional methods. This paper provides state-of-the-art review of some selected AI techniques and their applications in pile foundations, and presents the salient features associated with the modeling development of these AI techniques. The paper also discusses the strength and limitations of the selected AI techniques compared to other available modeling approaches.
文摘Semi-deep foundations socketed in rocks are considered to be a viable option for the foundations in the presence of heavy load imposed by high-rise structures, due to the low settlement and high bearing capacity. In the optimum design of semi-deep foundations, prediction of the shaft bearing capacity, rs, of foundations socketed in rocks is thus critically important. In this study, the unconfined compressive strength(UCS), qu, has been applied in order to investigate the shaft bearing capacity. For this, a database of 106 full-scale load tests is compiled with UCS values of surrounding rocks, in which 34 tests with rock quality designation(RQD), and 5 tests with rock mass rating(RMR). The bearing rocks for semi-deep foundations include limestone, mudstone, siltstone, shale, granite, tuff, granodiorite, claystone, sandstone, phyllite, schist, and greywacke. Using the database, the applicability and accuracy of the existing empirical methods are evaluated and new relations are derived between the shaft bearing capacity and UCS based on the types of rocks. Moreover, a general equation in case of unknown rock types is proposed and it is verified by another set of data. Since rock-socketed shafts are supported by rock mass(not intact rock), a reduction factor for the compressive strength is suggested and verified in which the effect of discontinuities is considered using the modified UCS, qu(modified), based upon RMR and RQD in order to take into account the effect of the rock mass properties.
基金Supported by the National Natural Science Foundation of China(50908048)the Priority Academic Program Development(PAPD)Project of JiangsuHigher Education Institutions
文摘Bi-directional static loading test adopting load cells is widely used around the world at present,with increase in diameter and length of deep foundations.In this paper,a new simple conversion method to predict the equivalent pile head load-settlement curve considering elastic shortening of deep foundation was put forward according to the load transfer mechanism.The proposed conversion method was applied to root caisson foundation in a bridge and to large diameter pipe piles in a sea wind power plant.Some new load cells,test procedure,and construction technology were adopted based on the applications to different deep foundations,which could enlarge the application scopes of bi-directional loading test.A new type of bi-directional loading test for pipe pile was conducted,in which the load cell was installed and loaded after the pipe pile with special connector has been set up.Unlike the conventional bi-directional loading test,the load cell can be reused and shows an evident economic benefit.
基金the Ministry of Higher Education and Scientific Research of Algeria for supporting this work by offering an 11-month scholarship to the first author at the 3SR laboratory of Grenoble Alpes University,France
文摘This paper presents a reliability analysis of the pseudo-static seismic bearing capacity of a strip foundation using the limit equilibrium theory. The first-order reliability method(FORM) is employed to calculate the reliability index. The response surface methodology(RSM) is used to assess the Hasofer e Lind reliability index and then it is optimized using a genetic algorithm(GA). The random variables used are the soil shear strength parameters and the seismic coefficients(khand kv). Two assumptions(normal and non-normal distribution) are used for the random variables. The assumption of uncorrelated variables was found to be conservative in comparison to that of negatively correlated soil shear strength parameters. The assumption of non-normal distribution for the random variables can induce a negative effect on the reliability index of the practical range of the seismic bearing capacity.
