A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large...A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large fingertip workspace,providing a desired force sensation when simulating both free-and constrained-space interactions,and ensuring a lightweight structure.In this paper,we present a forcefeedback glove using a pneumatically actuated mechanism mounted on the dorsal side of the user’s hand.By means of a triple kinematic paired link with a curved sliding slot,a hybrid cam-linkage mechanism is proposed to transmit the resistance from the pneumatic piston rod to the fingertip.In order to obtain a large normal component of the feedback force on the user’s fingertip,the profile of the sliding slot was synthesized through an analysis of the force equilibrium on the triple kinematic paired link.A prototype five-fingered glove with a mass of 245 g was developed,and a wearable force-measurement system was constructed to permit the quantitative evaluation of the interaction performance in both free and constrained space.The experimental results confirm that the glove can achieve an average resistance of less than 0.1 N in free-space simulation and a maximum fingertip force of 4 N in constrained-space simulation.The experiment further confirms that this glove permits the finger to move freely to simulate typical grasping gestures.展开更多
A particular emphasis is put on a novel wearable exoskeleton arm, ZJUESA, with 6 degrees of freedom, which is used for the robot teleoperation with the force-feedback in the unknown environment. In this external struc...A particular emphasis is put on a novel wearable exoskeleton arm, ZJUESA, with 6 degrees of freedom, which is used for the robot teleoperation with the force-feedback in the unknown environment. In this external structure mechanism, the 3-revolution-prismatic-spherical （3RPS） parallel mechanism is devised from the concept of the human upper-limb anatomy and applied for the shoulder 3-DOF joint. Meanwhile, the orthogonal experiment design method is introduced for its optimal design. Aiming at enhancing the performance of teleoperation, the force feedback is employed by the pneumatic system on ZJUESA to produce the vivid feeling in addition to the soft control interface. Due to the compressibility and nonlinearity of the pneumatic force feedback system, a novel hybrid fuzzy controller for the precise force control is proposed and realized based on the Mega8 microcontroller units as the units of the distributed control system on ZJUESA. With the results of several experiments for master-slave control with force feedback, the feasibility of ZJUESA system and the effect of its hybrid fuzzy controller are verified.展开更多
Microrobots powered by an external magnetic field could be used for sophisticated medical applications such as cell treatment,micromanipulation,and noninvasive surgery inside the body.Untethered microrobot application...Microrobots powered by an external magnetic field could be used for sophisticated medical applications such as cell treatment,micromanipulation,and noninvasive surgery inside the body.Untethered microrobot applications can benefit from haptic technology and telecommunication,enabling telemedical micro-manipulation.Users can manipulate the microrobots with haptic feedback by interacting with the robot operating system remotely in such applications.Artificially created haptic forces based on wirelessly transmitted data and model-based guidance can aid human operators with haptic sensations while manipulating microrobots.The system presented here includes a haptic device and a magnetic tweezer system linked together using a network-based teleoperation method with motion models in fluids.The magnetic microrobots can be controlled remotely,and the haptic interactions with the remote environment can be felt in real time.A time-domain passivity controller is applied to overcome network delay and ensure stability of communication.This study develops and tests a motion model for microrobots and evaluates two image-based 3D tracking algorithms to improve tracking accuracy in various Newtonian fluids.Additionally,it demonstrates that microrobots can group together to transport multiple larger objects,move through microfluidic channels for detailed tasks,and use a novel method for disassembly,greatly expanding their range of use in microscale operations.Remote medical treatment in multiple locations,remote delivery of medication without the need for physical penetration of the skin,and remotely controlled cell manipulations are some of the possible uses of the proposed technology.展开更多
基金the National Key Research and Development Program(2016YFB1001200)the National Natural Science Foundation of China(61572055 and 61633004).
文摘A wearable force-feedback glove is a promising way to enhance the immersive sensation when a user interacts with virtual objects in virtual reality scenarios.Design challenges for such a glove include allowing a large fingertip workspace,providing a desired force sensation when simulating both free-and constrained-space interactions,and ensuring a lightweight structure.In this paper,we present a forcefeedback glove using a pneumatically actuated mechanism mounted on the dorsal side of the user’s hand.By means of a triple kinematic paired link with a curved sliding slot,a hybrid cam-linkage mechanism is proposed to transmit the resistance from the pneumatic piston rod to the fingertip.In order to obtain a large normal component of the feedback force on the user’s fingertip,the profile of the sliding slot was synthesized through an analysis of the force equilibrium on the triple kinematic paired link.A prototype five-fingered glove with a mass of 245 g was developed,and a wearable force-measurement system was constructed to permit the quantitative evaluation of the interaction performance in both free and constrained space.The experimental results confirm that the glove can achieve an average resistance of less than 0.1 N in free-space simulation and a maximum fingertip force of 4 N in constrained-space simulation.The experiment further confirms that this glove permits the finger to move freely to simulate typical grasping gestures.
基金National Natural Science Foundation of China(No.50305035)
文摘A particular emphasis is put on a novel wearable exoskeleton arm, ZJUESA, with 6 degrees of freedom, which is used for the robot teleoperation with the force-feedback in the unknown environment. In this external structure mechanism, the 3-revolution-prismatic-spherical （3RPS） parallel mechanism is devised from the concept of the human upper-limb anatomy and applied for the shoulder 3-DOF joint. Meanwhile, the orthogonal experiment design method is introduced for its optimal design. Aiming at enhancing the performance of teleoperation, the force feedback is employed by the pneumatic system on ZJUESA to produce the vivid feeling in addition to the soft control interface. Due to the compressibility and nonlinearity of the pneumatic force feedback system, a novel hybrid fuzzy controller for the precise force control is proposed and realized based on the Mega8 microcontroller units as the units of the distributed control system on ZJUESA. With the results of several experiments for master-slave control with force feedback, the feasibility of ZJUESA system and the effect of its hybrid fuzzy controller are verified.
基金supported by National Science Foundation Grant No.2123824.
文摘Microrobots powered by an external magnetic field could be used for sophisticated medical applications such as cell treatment,micromanipulation,and noninvasive surgery inside the body.Untethered microrobot applications can benefit from haptic technology and telecommunication,enabling telemedical micro-manipulation.Users can manipulate the microrobots with haptic feedback by interacting with the robot operating system remotely in such applications.Artificially created haptic forces based on wirelessly transmitted data and model-based guidance can aid human operators with haptic sensations while manipulating microrobots.The system presented here includes a haptic device and a magnetic tweezer system linked together using a network-based teleoperation method with motion models in fluids.The magnetic microrobots can be controlled remotely,and the haptic interactions with the remote environment can be felt in real time.A time-domain passivity controller is applied to overcome network delay and ensure stability of communication.This study develops and tests a motion model for microrobots and evaluates two image-based 3D tracking algorithms to improve tracking accuracy in various Newtonian fluids.Additionally,it demonstrates that microrobots can group together to transport multiple larger objects,move through microfluidic channels for detailed tasks,and use a novel method for disassembly,greatly expanding their range of use in microscale operations.Remote medical treatment in multiple locations,remote delivery of medication without the need for physical penetration of the skin,and remotely controlled cell manipulations are some of the possible uses of the proposed technology.
