Yoantion Industrial INC.,LTD.is a listed company Stock Code 301053 specializing in high-end dyeing and finishing equipment.It serves as the vice president unit of the China Textile Machinery Association and the vice p...Yoantion Industrial INC.,LTD.is a listed company Stock Code 301053 specializing in high-end dyeing and finishing equipment.It serves as the vice president unit of the China Textile Machinery Association and the vice president unit of the China Dyeing and Printing Association.The company has been awarded numerous honors including National High-tech Enterprise and National Stenter Development Base.Its leading products are well-received both domestically and internationally.展开更多
Modern industrial equipment is increasingly characterized by miniaturization,integration,and high performance,necessitating the production of complex structural parts with exceptionally high internal surface quality.D...Modern industrial equipment is increasingly characterized by miniaturization,integration,and high performance,necessitating the production of complex structural parts with exceptionally high internal surface quality.Direct manufacturing often leads to high internal surface roughness,which traditional finishing and measuring methods cannot adequately address due to the decreasing size and increasing complexity of internal structures.This is especially true for components like pipes with large aspect ratios,extremely small deep holes,multi-stage bends,cross pipes,and array holes.To meet the high-performance manufacturing demands of these parts,advanced internal surface finishing and roughness measurement technologies have gained significant attention.This review focuses on the challenges and solutions related to internal surface parts with various apertures and complex structures.Internal surface finishing methods are categorized into mechanical finishing,fluid-based finishing,and energy-field-based finishing based on their characteristics.Roughness measurement technologies are divided into tool-probing and non-probing methods.The principles,required equipment,and key parameters of each finishing and measurement approach are discussed in detail.Additionally,the advantages and limitations of these methods are summarized,and future trends are forecasted.This paper serves as a comprehensive guide for researchers and engineers aiming to enhance the internal surface quality of complex structure parts.展开更多
High-performance devices usually have curved surfaces, requiring high accuracy of shape and low surface roughness. It is a challenge to achieve high accuracies for form and position on a device with low surface roughn...High-performance devices usually have curved surfaces, requiring high accuracy of shape and low surface roughness. It is a challenge to achieve high accuracies for form and position on a device with low surface roughness. However, due to the unique nonlinear rheology, magnetorheological fluids with hard abrasives are widely applied in ultra-precision surface finishing. Compared with conventional mechanical finishing, magnetorheological finishing displays obviously advantages, such as high precision shape of machined surface, low surface roughness and subsurface damage, and easy control for finishing processes. However, finishing performance depends on various factors, e.g. volume fraction and distribution of magnetic particles, types of hard abrasives and additives, strength of magnetic field, finishing forms. Therefore, a comprehensive review on related works is essential to understand the state-of-the-art of magnetorheological finishing and beneficial to inspire researchers to develop lower cost, higher machining accuracy and efficient approaches and setups, which demonstrates a significant guidance for development of high-performance parts in fields of aerospace, navigation and clinical medicine etc. This review starts from the rheological property of magnetorheological fluids, summarizing dynamically nonlinear rheological properties and stable finishing approaches. Then, the effect of components in magnetorheological fluids is discussed on finishing performance, consisting of magnetic particles, carrier fluid, additives and abrasives. Reasonable configuration of magnetorheological fluids, and different magnetorheological finishing methods are presented for variously curved surfaces. In addition, the current finishing forms and future directions are also addressed in this review.展开更多
Gears are important mechanical parts for transmitting power and play an increasingly important role in the machinery industry.The electric vehicle industry developed rapidly and became a vital development field of the...Gears are important mechanical parts for transmitting power and play an increasingly important role in the machinery industry.The electric vehicle industry developed rapidly and became a vital development field of the automotive industry over the past few years.The conversion of energy increases the requirements for electric vehicle transmissions,which promotes the development of high-speed and low-noise transmission gear.This paper elaborates on the research progress of high-speed and low-noise gear finishing methods.Firstly,this review analyses the machining requirements,finishing,and specific machining technologies of high-speed and low-noise gears.The importance of gear grinding and honing in high-speed and low-noise gear machining is highlighted.Secondly,the applications of gear grinding and honing in gear modification,error compensation,and texture control are analyzed.Furthermore,the role of precision machining technology in improving gear performance is clarified.Finally,the design and processing methods of the modified tooth flank for gear modification are summarized.In addition,the influence of tooth surface texture on noise is described,and the texture change methods are explored.The well-known open problems of gear finishing are finally identified,and some new research interests are also pointed out.This review will provide valuable references for further research on gear finishing.展开更多
The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault lo...The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.展开更多
A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-bu...A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.展开更多
Antifouling textiles have been a hot research field in the last ten years.But lately,the European Union(EU)is expected to ban the production of C6 fluorinated water repellent,oil repellent and antifouling agents from ...Antifouling textiles have been a hot research field in the last ten years.But lately,the European Union(EU)is expected to ban the production of C6 fluorinated water repellent,oil repellent and antifouling agents from 2025,achieving complete fluoride-free antifouling measures.In the context of the current policy regulations on fluorine-free treatment in the waterproof,oil repellent and antifouling finishing field,this paper conducts a literature survey and comprehensive understanding of the current research status and trend in fluorine-free antifouling finishing.CiteSpace and Carrot2 are used to conduct a literature review of the latest papers in two databases,Web of Science(WoS)and China National Knowledge Infrastructure(CNKI).Firstly,the theoretical evolution and technical characteristics of textiles antifouling finishing technology are systematically discussed,and the technological differences of antifouling finishing textiles for different demands are compared.Secondly,the three main stages of the development of textile antifouling finishing technology and its corresponding finishing methods are summarized.Finally,three paths for the future development of fluorine-free antifouling finishing are prospected:construction of low surface energy,construction of uniform rough surface and low surface energy,and construction of multistage rough surface with low surface energy.To facilitate the transition of the industrial sector to fluorine-free,regulatory restrictions could be strengthened by enhancing the sampling inspection of apparel fabrics,detecting fluorine in wastewater discharges and restricting the production of fluorine-containing finishing agents by manufacturers.展开更多
Thin copper substrates with high accuracy are highly required in precision physical experiments.However,even using double-sided lapping,the flatness is still limited due to the accuracy of lapping plate,process vibrat...Thin copper substrates with high accuracy are highly required in precision physical experiments.However,even using double-sided lapping,the flatness is still limited due to the accuracy of lapping plate,process vibration and so on.Hence,as a subsequent process,this paper employs magnetorheological finishing(MRF)to further improve the flatness.Nevertheless,thin copper substrates,which are sensitive to the stress,deformed easily with uneven material removal on the surface.Therefore,MRF is adopted on machining thin copper substrate for the first time considering deformation induced by stress.A finite element model is established to evaluate the deformation by residual stress,and the results show that the deformation tends to be more serious with the increase of the material removal.According to the simulation results,the material removal is optimized considering both deformation and efficiency,and a series of experiments are conducted on aΦ100×2.8 mm workpiece to verify the simulation results.The experimental results show that the flatness is further improved from peak to valley(PV)6.6μm to PV 2.3μm with optimized processing parameters.Hence,the feasibility of magnetorheological finishing on thin copper substrate is demonstrated.展开更多
Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the s...Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the scope of existing and new processes and applications at the forthcoming Techtextil show in Frankfurt from April 23-26.展开更多
Textiles are one of the oldest industries in the world which has been manufacturing fabrics and materials needed for various purposes.However,the industry has been confronted with some problems regarding its pollution...Textiles are one of the oldest industries in the world which has been manufacturing fabrics and materials needed for various purposes.However,the industry has been confronted with some problems regarding its pollution;specifically the dyeing and finishing processes.As for the given issues,there has been a trend in recent years to come up with more environmentally friendly solutions.展开更多
Since 2005,Santex Rimar Group has had a close relationship with the Chinese textile market.With a keen understanding of the market,Santex Rimar Group invested in a factory in Shanghai and established Santex Rimar Shan...Since 2005,Santex Rimar Group has had a close relationship with the Chinese textile market.With a keen understanding of the market,Santex Rimar Group invested in a factory in Shanghai and established Santex Rimar Shanghai Textile Machinery Co.,Ltd.In 2020,on the occasion of the 15th anniversary of Santex Rimar Shanghai,the Group has once again stepped up its efforts in the Chinese market by renting a new 10,000 square meter factory to expand its production capacity to meet the growing scale of the company and the strong growth of Chinese market demand,and expand its production capacity in China.展开更多
On the basis of ordinary plane magnetic abrasive finishing,a finishing method is proposed that can improve the flatness of a plane workpiece.In this method,the feed speed is varied during finishing according to the pr...On the basis of ordinary plane magnetic abrasive finishing,a finishing method is proposed that can improve the flatness of a plane workpiece.In this method,the feed speed is varied during finishing according to the profile curve of the initial surface and the material removal efficiency,to control the effective finishing time in different areas and thereby improve the surface flatness.A small magnetic pole with an end face diameter of 1 mm is designed,and a ferromagnetic plate is placed under the workpiece to improve the uniformity of the magnetic field distribution near the magnetic pole.An experiment on an A5052 aluminum alloy plate workpiece shows that after 60 min of finishing using the proposed method,the extreme difference of the workpiece surface can be reduced from 14.317μm to 2.18μm,and the standard deviation can be reduced from 3.322μm to 0.417μm.At the same time,according to the measurement results,a similar flatness can be achieved at different positions on the finishing area.Thus,the proposed variable-speed finishing method leads to obvious improvements in flatness.展开更多
In this study,a comprehensive rolling mill vibration test program was designed,including specific test conditions and a test system.The analysis of measured signals reveals the vibration response characteristics and t...In this study,a comprehensive rolling mill vibration test program was designed,including specific test conditions and a test system.The analysis of measured signals reveals the vibration response characteristics and their evolution at different gauge points in the finishing mill.This is particularly evident during abnormal rolling,where the signals highlight the characteristics of abnormal responses and vibration intensities.Abnormal vibrations during the rolling process mainly occur when the strip thickness is less than 2.5 mm,and at the rolling speed-up stage,the strong abnormal vibration occurs at each measuring point on the F2 transmission side.The maximum vibration intensity of the backup roll’s bearing seat is 17 mm/s.As the rolling progresses,the stress on the bolts changes.The strip thickness is negatively correlated with the peak values of bite and tail-flick impacts.The vibration characteristics vary with the strip thickness and the process state.展开更多
To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying co...To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying conditions. These conditions include the workpiece rotation speed, the oscillation speed, the contact pressure of the roller, the hardness of the roller, and the type of abrasive film. The superfinishing device is applied to polishing a thin and long cylindrical bar. A micro-finishing film and a lapping film were used as abrasive films. A1203 grains or SiC grains were used as abrasives. The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument. As a result, the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed, oscillation speed and contact pressure. The roller hardness has no effect on the efficient polishing conditions. The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.展开更多
Put forward a new kind of polishing method,ultrasonic magnetic abrasive fin-ishing(UMAF),and studied its mechanism of improving polishing efficiency.By analyzingall kind of forces acting on single abrasive particle in...Put forward a new kind of polishing method,ultrasonic magnetic abrasive fin-ishing(UMAF),and studied its mechanism of improving polishing efficiency.By analyzingall kind of forces acting on single abrasive particle in the polishing process and calculatingthe Size of the composition of forces,get the conclusion that UMAF will enhance the effi-ciency of the normal magnetic abrasive finishing(MAF)due to the ultrasonic vibration in-creases the cutting force and depth.At last the idea of designing the UMAF system basedon numerical control milling machine is put forward which is convenient to setup and willaccelerate the practical application of MAF.展开更多
This paper reviews recent developments of the soft abrasive flow finishing(SAF)method in constraint space.The multiphase fluid dynamics modeling,material removal mechanism,auxiliary strengthening finishing techniques,...This paper reviews recent developments of the soft abrasive flow finishing(SAF)method in constraint space.The multiphase fluid dynamics modeling,material removal mechanism,auxiliary strengthening finishing techniques,and observation of surface impact effects by abrasive particles and cavitation bubbles are presented in brief.Development prospects and challenges are given for four aspects:thin-walled curved surfaces,biomedical functions,electronic information,and precise optical components.展开更多
Background: Insects, such as Hermetia illucens larvae, are rich in chitin and proteins, and represent a suitable feed ingredient replacement for animals. However, little is known about the effect of administering H. i...Background: Insects, such as Hermetia illucens larvae, are rich in chitin and proteins, and represent a suitable feed ingredient replacement for animals. However, little is known about the effect of administering H. illucens larvae on intestinal microbiota, bacterial metabolite profiles, and mucosal immune status in animals. This study aimed to investigate the effects of administering H. illucens larvae on colonic microbiota and bacterial metabolites production in finishing pigs. Seventy-two crossbred(Duroc × Landrace × Large White) female pigs(initial body weight, 76.0 ± 0.52 kg) were randomly allocated to three different dietary treatments: a control diet(Control group) and two diets corresponding to 4%(H1 group) and 8%(H2 group) H. illucens larvae inclusion levels, respectively. Each treatment consisted of eight pens(replicates), with three pigs per pen. After 46 days of feeding, eight pigs per treatment(n =8) were slaughtered, and the colonic digesta and mucosa were collected for microbial composition and microbial fermentation products, and genes expression analyses.Results: The results showed that the H1 diet significantly increased the abundance of Lactobacillus,Pseudobutyrivibrio, Roseburia, and Faecalibacterium compared with those in the control group(P < 0.05), with a decrease in the abundance of Streptococcus. The numbers of Lactobacillus, Roseburia, and Clostridium cluster XIVa were significantly greater in the H1 group than in the control group(P < 0.05). Meanwhile, H2 diet increased the number of Clostridium cluster XIVa compared with the control group(P < 0.05). For colonic metabolites, total short chain fatty acids, butyrate, and isobutyrate concentrations were significantly higher in the H1 group than those in the control group(P < 0.05);the H1 treatment caused a striking decrease in protein fermentation compared with the control group, as the concentrations of total amines, cadaverine, tryptamine, phenol, p-cresol, and skatole were significantly lower(P < 0.05). Additionally, H2 diet also increased butyrate concentration compared with control group(P < 0.05), while decreased the concentrations of phenol, p-cresol, and skatole(P < 0.05). Pigs in the H1 group down-regulated the expression of TLR-4 and pro-inflammatory cytokines(IFN-γ) compared with pigs in the control group(P < 0.05), and up-regulated anti-inflammatory cytokine(IL-10) and intestinal barrier genes(ZO-1, occludin, and mucin-1). H2 diet up-regulated the expression of ZO-1 compared with control group(P < 0.05). Furthermore, the changes in the colonic mucosal gene expression were associated with changes in the bacterial composition and their metabolites.Conclusions: Collectively, dietary inclusion of Hermetia illucens larvae may enhance mucosal immune homeostasis of pigs via altering bacterial composition and their metabolites. These findings provide a new perspective on insect meal as a sustainable protein source rich in nutrient ingredients for swine.展开更多
The effect of the inclusion of chestnut in pigs ifnishing diet on volatile compounds of dry-cured Celta ham was studied. Twelve hams of each type （from three different pigs ifnishing diets：concentrate （CO）, mixed ...The effect of the inclusion of chestnut in pigs ifnishing diet on volatile compounds of dry-cured Celta ham was studied. Twelve hams of each type （from three different pigs ifnishing diets：concentrate （CO）, mixed （MI） and chestnut （CH）） were used. Volatiles were extracted using a purge-and-trap method and analyzed by gas chromatography/mass spectrometry （GC/MS）. Thirty-nine volatile compounds were identified in dry-cured Celta ham samples. Most abundant volatiles in ham samples were aldehydes, which represented respectively, 53% （CO）, 51% （MI） and 46% （CH） of the total volatile composition. With the exception of 2-butenal, 2-methyl, all aldehydes were affected by feeding system. On the other hand, hydrocarbons n-alkanes were the second major group in the volatile proifle of dry-cured Celta hams and represented 28.9, 35.7 and 32.4%of the total volatile composition for CO, MI and CH groups, respectively. Ham samples from chestnut group showed a higher content of alcohols and this result could be related with the inclusion of chestnut in the ifnishing diet of pigs. Principal component analysis showed a good separation among groups. The discriminant analysis selected eight variables （butanoic acid, hexanal, octanal, nonenal （E）, decenal （E）, tetradecane, decane trimethyl and pyridine 2-methyl） and calculated two discriminating functions to predict if chestnut has been included in the ifnishing diet. Thus, it was possible to discriminate between groups fed with ifnishing diets containing chestnuts in their composition （mixed and chestnut group）.展开更多
The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces...The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has signif- icant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and inte- grated finishing and strengthening technologies and dis- cusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.展开更多
Background: With increasing health awareness among consumers, the demand for healthier, tastier, higher quality and nutritional value pork is increasing. It has been shown that different dietary starch sources can alt...Background: With increasing health awareness among consumers, the demand for healthier, tastier, higher quality and nutritional value pork is increasing. It has been shown that different dietary starch sources can alter the carcass traits and meat quality. However, research on the effects of different starch sources with clear different amylose/amylopectin ratio on the amino acid and fatty acid composition in Longissimus thoracis(L. thoracis) muscle of pigs is limited. This study aimed to investigate the effects of different dietary starch sources on carcass traits, meat quality, muscle amino acid and fatty acid composition, and the mRNA expression levels of genes involved in lipid metabolism and muscle fiber characteristics in finishing pigs. A total of 72 Duroc × Landrace × Large White barrows were randomly allocated to 3 different dietary treatment groups with 8 replicate pens/group and 3 pigs per pen.Tapioca starch(TS), corn starch(CS), and pea starch(PS), with amylose/amylopectin ratio of 0.11, 0.25, and 0.44,respectively, were used as their dietary starch sources for 40 days.Results: Results showed that the PS diet significantly increased(P < 0.05) the final body weight, average daily gain,loin-eye area, and fat-free lean index compared with the TS diet, but significantly decreased(P < 0.05) the feed to gain ratio and backfat thickness. Compared with the TS diet, PS diet also increased(P < 0.05) the pH45 min, marbling scores, the content of intramuscular fat and inosine monophosphate in the L. thoracis, and decreased(P < 0.05) the drip loss and shear force. In addition, compared with the TS diet, PS diet increased(P < 0.05) the proportions of flavor amino acids, DHA, EPA, and n-3 polyunsaturated fatty acid(PUFA) in the L. thoracis compared with TS diet,but decreased(P < 0.05) the ratio of n-6/n-3 PUFA. Furthermore, compared with the TS diet, PS diet also upregulated(P < 0.05) the lipogenic genes(FAS, LPL, SCD, ACCα) and myosin heavy-chain(MyHC)-IIa mRNA expression levels compared with the TS diet, but downregulated(P < 0.05) the CPT1 B and MyHC-IIb mRNA levels.Conclusions: In conclusion, these results provided compelling evidence that the different dietary starch source altered the carcass traits, meat flavor and quality in finishing pigs, and consumption of a diet with higher amylose/amylopectin ratio results in the production of a healthy, higher quality, and nutritional value pork.展开更多
文摘Yoantion Industrial INC.,LTD.is a listed company Stock Code 301053 specializing in high-end dyeing and finishing equipment.It serves as the vice president unit of the China Textile Machinery Association and the vice president unit of the China Dyeing and Printing Association.The company has been awarded numerous honors including National High-tech Enterprise and National Stenter Development Base.Its leading products are well-received both domestically and internationally.
基金the financial supports from National Key R&D Program of China(No.2022YFB3403301)the Funds for International Cooperation and Exchange of the National Natural Science Foundation of China(No.52311530080)。
文摘Modern industrial equipment is increasingly characterized by miniaturization,integration,and high performance,necessitating the production of complex structural parts with exceptionally high internal surface quality.Direct manufacturing often leads to high internal surface roughness,which traditional finishing and measuring methods cannot adequately address due to the decreasing size and increasing complexity of internal structures.This is especially true for components like pipes with large aspect ratios,extremely small deep holes,multi-stage bends,cross pipes,and array holes.To meet the high-performance manufacturing demands of these parts,advanced internal surface finishing and roughness measurement technologies have gained significant attention.This review focuses on the challenges and solutions related to internal surface parts with various apertures and complex structures.Internal surface finishing methods are categorized into mechanical finishing,fluid-based finishing,and energy-field-based finishing based on their characteristics.Roughness measurement technologies are divided into tool-probing and non-probing methods.The principles,required equipment,and key parameters of each finishing and measurement approach are discussed in detail.Additionally,the advantages and limitations of these methods are summarized,and future trends are forecasted.This paper serves as a comprehensive guide for researchers and engineers aiming to enhance the internal surface quality of complex structure parts.
基金funded by the National Key Research and Development Program of China (2018YFA0703400)the Young Scientists Fund of the National Natural Science Foundation of China (52205447)+2 种基金Changjiang Scholars Program of Chinese Ministry of Educationthe Xinghai Science Funds for Distinguished Young Scholars at Dalian University of Technologythe Collaborative Innovation Center of Major Machine Manufacturing in Liaoning。
文摘High-performance devices usually have curved surfaces, requiring high accuracy of shape and low surface roughness. It is a challenge to achieve high accuracies for form and position on a device with low surface roughness. However, due to the unique nonlinear rheology, magnetorheological fluids with hard abrasives are widely applied in ultra-precision surface finishing. Compared with conventional mechanical finishing, magnetorheological finishing displays obviously advantages, such as high precision shape of machined surface, low surface roughness and subsurface damage, and easy control for finishing processes. However, finishing performance depends on various factors, e.g. volume fraction and distribution of magnetic particles, types of hard abrasives and additives, strength of magnetic field, finishing forms. Therefore, a comprehensive review on related works is essential to understand the state-of-the-art of magnetorheological finishing and beneficial to inspire researchers to develop lower cost, higher machining accuracy and efficient approaches and setups, which demonstrates a significant guidance for development of high-performance parts in fields of aerospace, navigation and clinical medicine etc. This review starts from the rheological property of magnetorheological fluids, summarizing dynamically nonlinear rheological properties and stable finishing approaches. Then, the effect of components in magnetorheological fluids is discussed on finishing performance, consisting of magnetic particles, carrier fluid, additives and abrasives. Reasonable configuration of magnetorheological fluids, and different magnetorheological finishing methods are presented for variously curved surfaces. In addition, the current finishing forms and future directions are also addressed in this review.
基金Supported by National Natural Science Foundation of China(Grant Nos.52275483,52075142,and U22B2084)the Fundamental Research Funds for the Central Universities of China(Grant No.JZ2023HGPA0292).
文摘Gears are important mechanical parts for transmitting power and play an increasingly important role in the machinery industry.The electric vehicle industry developed rapidly and became a vital development field of the automotive industry over the past few years.The conversion of energy increases the requirements for electric vehicle transmissions,which promotes the development of high-speed and low-noise transmission gear.This paper elaborates on the research progress of high-speed and low-noise gear finishing methods.Firstly,this review analyses the machining requirements,finishing,and specific machining technologies of high-speed and low-noise gears.The importance of gear grinding and honing in high-speed and low-noise gear machining is highlighted.Secondly,the applications of gear grinding and honing in gear modification,error compensation,and texture control are analyzed.Furthermore,the role of precision machining technology in improving gear performance is clarified.Finally,the design and processing methods of the modified tooth flank for gear modification are summarized.In addition,the influence of tooth surface texture on noise is described,and the texture change methods are explored.The well-known open problems of gear finishing are finally identified,and some new research interests are also pointed out.This review will provide valuable references for further research on gear finishing.
基金the National Key Research and Development Program of China under Grant 2021YFB3301300the National Natural Science Foundation of China under Grant 62203213+1 种基金the Natural Science Foundation of Jiangsu Province under Grant BK20220332the Open Project Program of Fujian Provincial Key Laboratory of Intelligent Identification and Control of Complex Dynamic System under Grant 2022A0004.
文摘The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.
文摘A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.
基金Fundamental Research Funds for the Central Universities,China(No.2232021G-03)National Natural Science Foundation of China(Nos.72074132 and 71704165)。
文摘Antifouling textiles have been a hot research field in the last ten years.But lately,the European Union(EU)is expected to ban the production of C6 fluorinated water repellent,oil repellent and antifouling agents from 2025,achieving complete fluoride-free antifouling measures.In the context of the current policy regulations on fluorine-free treatment in the waterproof,oil repellent and antifouling finishing field,this paper conducts a literature survey and comprehensive understanding of the current research status and trend in fluorine-free antifouling finishing.CiteSpace and Carrot2 are used to conduct a literature review of the latest papers in two databases,Web of Science(WoS)and China National Knowledge Infrastructure(CNKI).Firstly,the theoretical evolution and technical characteristics of textiles antifouling finishing technology are systematically discussed,and the technological differences of antifouling finishing textiles for different demands are compared.Secondly,the three main stages of the development of textile antifouling finishing technology and its corresponding finishing methods are summarized.Finally,three paths for the future development of fluorine-free antifouling finishing are prospected:construction of low surface energy,construction of uniform rough surface and low surface energy,and construction of multistage rough surface with low surface energy.To facilitate the transition of the industrial sector to fluorine-free,regulatory restrictions could be strengthened by enhancing the sampling inspection of apparel fabrics,detecting fluorine in wastewater discharges and restricting the production of fluorine-containing finishing agents by manufacturers.
基金Supported by Science Challenge Project of China(Grant Nos.TZ2016006-0103,TZ2016006-0107-02)National Natural Science Foundation of China(Grant No.51975096)+1 种基金Liaoning Revitalization Talents Program of China(Grant No.XLYC1807230)National Key Research and Development Program of China(Grant No.2017YFA0701200)。
文摘Thin copper substrates with high accuracy are highly required in precision physical experiments.However,even using double-sided lapping,the flatness is still limited due to the accuracy of lapping plate,process vibration and so on.Hence,as a subsequent process,this paper employs magnetorheological finishing(MRF)to further improve the flatness.Nevertheless,thin copper substrates,which are sensitive to the stress,deformed easily with uneven material removal on the surface.Therefore,MRF is adopted on machining thin copper substrate for the first time considering deformation induced by stress.A finite element model is established to evaluate the deformation by residual stress,and the results show that the deformation tends to be more serious with the increase of the material removal.According to the simulation results,the material removal is optimized considering both deformation and efficiency,and a series of experiments are conducted on aΦ100×2.8 mm workpiece to verify the simulation results.The experimental results show that the flatness is further improved from peak to valley(PV)6.6μm to PV 2.3μm with optimized processing parameters.Hence,the feasibility of magnetorheological finishing on thin copper substrate is demonstrated.
文摘Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the scope of existing and new processes and applications at the forthcoming Techtextil show in Frankfurt from April 23-26.
文摘Textiles are one of the oldest industries in the world which has been manufacturing fabrics and materials needed for various purposes.However,the industry has been confronted with some problems regarding its pollution;specifically the dyeing and finishing processes.As for the given issues,there has been a trend in recent years to come up with more environmentally friendly solutions.
文摘Since 2005,Santex Rimar Group has had a close relationship with the Chinese textile market.With a keen understanding of the market,Santex Rimar Group invested in a factory in Shanghai and established Santex Rimar Shanghai Textile Machinery Co.,Ltd.In 2020,on the occasion of the 15th anniversary of Santex Rimar Shanghai,the Group has once again stepped up its efforts in the Chinese market by renting a new 10,000 square meter factory to expand its production capacity to meet the growing scale of the company and the strong growth of Chinese market demand,and expand its production capacity in China.
文摘On the basis of ordinary plane magnetic abrasive finishing,a finishing method is proposed that can improve the flatness of a plane workpiece.In this method,the feed speed is varied during finishing according to the profile curve of the initial surface and the material removal efficiency,to control the effective finishing time in different areas and thereby improve the surface flatness.A small magnetic pole with an end face diameter of 1 mm is designed,and a ferromagnetic plate is placed under the workpiece to improve the uniformity of the magnetic field distribution near the magnetic pole.An experiment on an A5052 aluminum alloy plate workpiece shows that after 60 min of finishing using the proposed method,the extreme difference of the workpiece surface can be reduced from 14.317μm to 2.18μm,and the standard deviation can be reduced from 3.322μm to 0.417μm.At the same time,according to the measurement results,a similar flatness can be achieved at different positions on the finishing area.Thus,the proposed variable-speed finishing method leads to obvious improvements in flatness.
文摘In this study,a comprehensive rolling mill vibration test program was designed,including specific test conditions and a test system.The analysis of measured signals reveals the vibration response characteristics and their evolution at different gauge points in the finishing mill.This is particularly evident during abnormal rolling,where the signals highlight the characteristics of abnormal responses and vibration intensities.Abnormal vibrations during the rolling process mainly occur when the strip thickness is less than 2.5 mm,and at the rolling speed-up stage,the strong abnormal vibration occurs at each measuring point on the F2 transmission side.The maximum vibration intensity of the backup roll’s bearing seat is 17 mm/s.As the rolling progresses,the stress on the bolts changes.The strip thickness is negatively correlated with the peak values of bite and tail-flick impacts.The vibration characteristics vary with the strip thickness and the process state.
基金work supported by the Second Stage of Brain Korea 21 Projects of Korea
文摘To determine mirror surface finishing conditions and efficient and economical superfinishing conditions for pure titanium and titanium alloys, an abrasive film is used when superfinishing is performed under varying conditions. These conditions include the workpiece rotation speed, the oscillation speed, the contact pressure of the roller, the hardness of the roller, and the type of abrasive film. The superfinishing device is applied to polishing a thin and long cylindrical bar. A micro-finishing film and a lapping film were used as abrasive films. A1203 grains or SiC grains were used as abrasives. The surface roughness of a polished workpiece was measured using a stylus-type surface-roughness measuring instrument. As a result, the conditions to improve the polishing surface efficiently include high values for the workpiece rotation speed, oscillation speed and contact pressure. The roller hardness has no effect on the efficient polishing conditions. The mirror finish of a surface can be created using lapping film of 3 μm with Al2O3 grains after polishing to a steady surface roughness under the efficient polishing conditions.
基金Supported by Ningbo Key Technology R&D Program(2005B100058)
文摘Put forward a new kind of polishing method,ultrasonic magnetic abrasive fin-ishing(UMAF),and studied its mechanism of improving polishing efficiency.By analyzingall kind of forces acting on single abrasive particle in the polishing process and calculatingthe Size of the composition of forces,get the conclusion that UMAF will enhance the effi-ciency of the normal magnetic abrasive finishing(MAF)due to the ultrasonic vibration in-creases the cutting force and depth.At last the idea of designing the UMAF system basedon numerical control milling machine is put forward which is convenient to setup and willaccelerate the practical application of MAF.
基金supported by the National Natural Science Foundation of China(Nos.52175124 and 52305139)the Natural Science Foundation of Zhejiang Province(Nos.LZ21E050003,LY17E050004,and LQ23E050017)+1 种基金the Zhejiang Provincial Postdoctoral Merit-Based Funding Project(No.ZJ2022068)the Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(No.GZKF-202125),China.
文摘This paper reviews recent developments of the soft abrasive flow finishing(SAF)method in constraint space.The multiphase fluid dynamics modeling,material removal mechanism,auxiliary strengthening finishing techniques,and observation of surface impact effects by abrasive particles and cavitation bubbles are presented in brief.Development prospects and challenges are given for four aspects:thin-walled curved surfaces,biomedical functions,electronic information,and precise optical components.
基金supported by the Presidential Foundation of the Guangdong Academy of Agricultural Sciences(201802B,201621)Guangdong Modern Agro-industry Technology Research System(2016LM1080,2017LM1080)
文摘Background: Insects, such as Hermetia illucens larvae, are rich in chitin and proteins, and represent a suitable feed ingredient replacement for animals. However, little is known about the effect of administering H. illucens larvae on intestinal microbiota, bacterial metabolite profiles, and mucosal immune status in animals. This study aimed to investigate the effects of administering H. illucens larvae on colonic microbiota and bacterial metabolites production in finishing pigs. Seventy-two crossbred(Duroc × Landrace × Large White) female pigs(initial body weight, 76.0 ± 0.52 kg) were randomly allocated to three different dietary treatments: a control diet(Control group) and two diets corresponding to 4%(H1 group) and 8%(H2 group) H. illucens larvae inclusion levels, respectively. Each treatment consisted of eight pens(replicates), with three pigs per pen. After 46 days of feeding, eight pigs per treatment(n =8) were slaughtered, and the colonic digesta and mucosa were collected for microbial composition and microbial fermentation products, and genes expression analyses.Results: The results showed that the H1 diet significantly increased the abundance of Lactobacillus,Pseudobutyrivibrio, Roseburia, and Faecalibacterium compared with those in the control group(P < 0.05), with a decrease in the abundance of Streptococcus. The numbers of Lactobacillus, Roseburia, and Clostridium cluster XIVa were significantly greater in the H1 group than in the control group(P < 0.05). Meanwhile, H2 diet increased the number of Clostridium cluster XIVa compared with the control group(P < 0.05). For colonic metabolites, total short chain fatty acids, butyrate, and isobutyrate concentrations were significantly higher in the H1 group than those in the control group(P < 0.05);the H1 treatment caused a striking decrease in protein fermentation compared with the control group, as the concentrations of total amines, cadaverine, tryptamine, phenol, p-cresol, and skatole were significantly lower(P < 0.05). Additionally, H2 diet also increased butyrate concentration compared with control group(P < 0.05), while decreased the concentrations of phenol, p-cresol, and skatole(P < 0.05). Pigs in the H1 group down-regulated the expression of TLR-4 and pro-inflammatory cytokines(IFN-γ) compared with pigs in the control group(P < 0.05), and up-regulated anti-inflammatory cytokine(IL-10) and intestinal barrier genes(ZO-1, occludin, and mucin-1). H2 diet up-regulated the expression of ZO-1 compared with control group(P < 0.05). Furthermore, the changes in the colonic mucosal gene expression were associated with changes in the bacterial composition and their metabolites.Conclusions: Collectively, dietary inclusion of Hermetia illucens larvae may enhance mucosal immune homeostasis of pigs via altering bacterial composition and their metabolites. These findings provide a new perspective on insect meal as a sustainable protein source rich in nutrient ingredients for swine.
基金financially supported by the Spanish Ministry of Science and Innovation(AGL2008-05274-C02-01/ALI)
文摘The effect of the inclusion of chestnut in pigs ifnishing diet on volatile compounds of dry-cured Celta ham was studied. Twelve hams of each type （from three different pigs ifnishing diets：concentrate （CO）, mixed （MI） and chestnut （CH）） were used. Volatiles were extracted using a purge-and-trap method and analyzed by gas chromatography/mass spectrometry （GC/MS）. Thirty-nine volatile compounds were identified in dry-cured Celta ham samples. Most abundant volatiles in ham samples were aldehydes, which represented respectively, 53% （CO）, 51% （MI） and 46% （CH） of the total volatile composition. With the exception of 2-butenal, 2-methyl, all aldehydes were affected by feeding system. On the other hand, hydrocarbons n-alkanes were the second major group in the volatile proifle of dry-cured Celta hams and represented 28.9, 35.7 and 32.4%of the total volatile composition for CO, MI and CH groups, respectively. Ham samples from chestnut group showed a higher content of alcohols and this result could be related with the inclusion of chestnut in the ifnishing diet of pigs. Principal component analysis showed a good separation among groups. The discriminant analysis selected eight variables （butanoic acid, hexanal, octanal, nonenal （E）, decenal （E）, tetradecane, decane trimethyl and pyridine 2-methyl） and calculated two discriminating functions to predict if chestnut has been included in the ifnishing diet. Thus, it was possible to discriminate between groups fed with ifnishing diets containing chestnuts in their composition （mixed and chestnut group）.
基金Supported by Science Fund for Creative Research Groups of NSFC(51621064)National Natural Science Foundation of China(Grant No.51475074,11302043)the Fundamental Research Funds for the Central Universities(DUT15QY37)
文摘The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has signif- icant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and inte- grated finishing and strengthening technologies and dis- cusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.
基金supported by the National Natural Science Foundation of China (31902200)Talent Project of the Guangdong Academy of Agricultural Sciences (201803)+5 种基金Special fund for scientific innovation strategy-construction of high level Academy of Agriculture Science,Recommended Program of Guangdong (2018kczx06)Guangdong Modern Agro-industry Technology Research System (2019KJ115)National Key Research and Development Program of China (2016YFD0501210)Science and Technology planning project of Guangdong Province (2019A050505007)key project of Guangzhou Science and Technology Plan (201707020007)Science and Technology planning project of Guangdong Province (2019A050505007)。
文摘Background: With increasing health awareness among consumers, the demand for healthier, tastier, higher quality and nutritional value pork is increasing. It has been shown that different dietary starch sources can alter the carcass traits and meat quality. However, research on the effects of different starch sources with clear different amylose/amylopectin ratio on the amino acid and fatty acid composition in Longissimus thoracis(L. thoracis) muscle of pigs is limited. This study aimed to investigate the effects of different dietary starch sources on carcass traits, meat quality, muscle amino acid and fatty acid composition, and the mRNA expression levels of genes involved in lipid metabolism and muscle fiber characteristics in finishing pigs. A total of 72 Duroc × Landrace × Large White barrows were randomly allocated to 3 different dietary treatment groups with 8 replicate pens/group and 3 pigs per pen.Tapioca starch(TS), corn starch(CS), and pea starch(PS), with amylose/amylopectin ratio of 0.11, 0.25, and 0.44,respectively, were used as their dietary starch sources for 40 days.Results: Results showed that the PS diet significantly increased(P < 0.05) the final body weight, average daily gain,loin-eye area, and fat-free lean index compared with the TS diet, but significantly decreased(P < 0.05) the feed to gain ratio and backfat thickness. Compared with the TS diet, PS diet also increased(P < 0.05) the pH45 min, marbling scores, the content of intramuscular fat and inosine monophosphate in the L. thoracis, and decreased(P < 0.05) the drip loss and shear force. In addition, compared with the TS diet, PS diet increased(P < 0.05) the proportions of flavor amino acids, DHA, EPA, and n-3 polyunsaturated fatty acid(PUFA) in the L. thoracis compared with TS diet,but decreased(P < 0.05) the ratio of n-6/n-3 PUFA. Furthermore, compared with the TS diet, PS diet also upregulated(P < 0.05) the lipogenic genes(FAS, LPL, SCD, ACCα) and myosin heavy-chain(MyHC)-IIa mRNA expression levels compared with the TS diet, but downregulated(P < 0.05) the CPT1 B and MyHC-IIb mRNA levels.Conclusions: In conclusion, these results provided compelling evidence that the different dietary starch source altered the carcass traits, meat flavor and quality in finishing pigs, and consumption of a diet with higher amylose/amylopectin ratio results in the production of a healthy, higher quality, and nutritional value pork.
