Excavation gaps around the front shield can be generated during shield construction,resulting in significant ground settlement.Traditional synchronous grouting slurries are unsuitable forfilling these gaps during tunn...Excavation gaps around the front shield can be generated during shield construction,resulting in significant ground settlement.Traditional synchronous grouting slurries are unsuitable forfilling these gaps during tunneling under existing subway lines.To address this issue,experiments are conducted on mix characteristics and hardening properties of slurries with variations infineness and contents offly ash.The experimental and computed tomography scan results yield the followingfindings:(1)fly ash with highfineness can effectively reduce the early strength of slurries and enhance their injectability.This improves thefilling effect on micropores in the slurry and ultimately enhances thefinal hardening strength.(2)Fineness offly ash controls the process of slurry hydration.The higher thefineness offly ash,the more visible the exothermic hydration of slurry and the earlier the highest temperature peak appears.(3)Fly ash with highfineness can effectively increase the density and consolidation rate of slurries,resulting in greater improvement in slurry strength,particularly when the ratio offly ash to cement(mf/mc)is 0.75.(4)Fly ash with highfineness can effectively decrease the likelihood of appearance of pores in the slurry,optimize the pore structure,and enhance the strength of slurries after consolidation.展开更多
The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement main...The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement mainly with hemihydrate had a characteristic abnormal peak and rapid increase in early period. The resistivity measurement technique can be used to discriminate abnormal setting. For normal cement with gypsum, the increase in fineness of the Portland cement decreases the minimum resistivhy due to a higher ionic concentration and increases the 24 hour resistivity due to a reduction in macroscopic pore size. The setting time, compressive strength, pore structure of pastes made from different cements were carried out to compare the influence of water to cement ratio, calcium sulfate state and fineness. It is found that the electrical and mechanical properties are strongly affected by the initial porosity, the presence of hemihydrate or gypsum, and the fineness of cement.展开更多
Cotton,the most important natural fiber crop in the world,is a mainstay in China's economy.However,for over two decades,cotton yields both in China and U.S.have been at a plateau.
In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fi...In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fine aggregate, reduce the consumption of the natural resources and improve the durability of concrete. In this study, the effect of the fineness on the high temperature and sulphate resistances of concrete mortar specimens, produced with ground granulated blast-furnace slag (GBFS) replacing cement, is investigated. The compressive and flexural strength test results for all series related to durability effects, exposing temperature and solutions, exposure times for these durability effects, slag content and fineness are discussed. Conse- quently, the optimum slag contents are determined for producing the sulphate and high temperature resistant mortars.展开更多
The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental...The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental results show that trace Ti and Y can significantlyimprove the mechanical properties of Au-based alloys with 990 fineness because Ti and Y cansignificantly refine matrix grains, and solid solution strengthening, work strengthening andprecipitation strengthening occur during mechanical heat treatment.展开更多
The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).Th...The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).The Pearson correlation analysis method was used to calculate the correlation coefficient between the porosity and age of cement paste,the specific surface area of GGBS and the content of GGBS.The test results exhibited that the porosity of the cement paste with different ageing durations gradually decreased on increasing the content and specific surface area of GGBS.The content and specific surface area of GGBS had a negligible effect on the 1-10 nm size gel pores in the cement paste,whereas,had a significant effect on the 10-100 nm size capillary pores.In addition,these parameters did not affect the final most probable pore size of the cement paste.The correlation between age and porosity was the largest,and the correlation between GGBS content and porosity was greater than that between GGBS specific surface area and porosity.Moreover,a modified pore structure model was successfully developed to effectively predict the pore structure of the GGBS based cement paste.展开更多
The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysi...The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.展开更多
Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we co...Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we conducted a survey of the floodplain of Soyang Lake to analyze the sediments in the area.We used global positioning system(GPS)data and aerial photography to monitor sediment deposits in the Soyang Lake floodplain.Data from three GPS units were compared to determine the accuracy of sampling location measurement.Sediment samples were collected at three sites:two in the eastern region of the floodplain and one in the western region.A total of eight samples were collected:Three samples were collected at 10 cm intervals to a depth of 30 cm from each site of the eastern sampling point,and two samples were collected at depths of 10 and 30 cm at the western sampling point.Samples were collected and analyzed for vertical and horizontal trends in particle size and moisture content.The sizes of the sediment samples ranged from coarse to very coarse sediments with a negative slope,which indicate eastward movement from the breach.The probability of a breach was indicated by the high water content at the eastern side of the floodplain,with the eastern sites showing a higher probability than the western sites.The results of this study indicate that analyses of grain fineness,moisture content,sediment deposits,and sediment removal rates can be used to understand and predict the direction of breach movement and sediment distribution in Soyang Lake.展开更多
In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent r...In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.展开更多
Pancreatic cysts are mostly incidental findings on computed tomography or magnetic resonance imaging scans,with few patients presenting with abdominal pain or other symptoms.The accurate diagnosis of cysts is importan...Pancreatic cysts are mostly incidental findings on computed tomography or magnetic resonance imaging scans,with few patients presenting with abdominal pain or other symptoms.The accurate diagnosis of cysts is important as management depends on the type(neoplastic or non-neoplastic).Cross-sectional imaging is fast being replaced with endoscopic ultrasound(EUS)and various techniques based on that such as EUS-guided fine needle aspiration,EUS-guided needle confocal laser endomicroscopy,EUS-through-the-needle biopsy,and contrast-enhanced EUS.Clinical studies have reported varying diagnostic and adverse event rates with these modalities.In addition,American,European,and Kyoto guidelines for the diagnosis and management of pancreatic cysts have provided different recommendations.In this editorial,we elaborate on the clinical guidelines,recent studies,and comparison of different endoscopic methods for the diagnosis of pancreatic cysts.展开更多
Powdery mildew negatively impacts wheat yield and quality.Emmer wheat(Triticum dicoccum),an ancestral species of common wheat,is a gene donor for wheat improvement.Cultivated emmer accession H1-707 exhibited all-stage...Powdery mildew negatively impacts wheat yield and quality.Emmer wheat(Triticum dicoccum),an ancestral species of common wheat,is a gene donor for wheat improvement.Cultivated emmer accession H1-707 exhibited all-stage resistance to powdery mildew over consecutive years.Genetic analysis of H1-707 at the seedling stage revealed a dominant monogenic inheritance pattern,and the underlying gene was designated Pm71.By employing bulked segregant exome sequencing(BSE-Seq)and using 2000 F2:3 families,Pm71 was fine mapped to a 336-kb interval on chromosome arm 6AS by referencing to the durum cv.Svevo RefSeq 1.0.Collinearity analysis revealed high homology in the candidate interval between Svevo and six Triticum species.Among six high-confidence genes annotated within this interval,TRITD6Av1G005050 encoding a GDSL esterase/lipase was identified as a key candidate for Pm71.展开更多
The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three m...The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three main types of broilers diets were examined in this experiment.The examined broiler diets were formulated to meet the Ross 308 strain requirements.A complete factorial design(3×3×3)was used to identify the effects of studied factors on the pellet mill machine and pellet production.The obtained results indicated that the pellet mill productivity significantly(p˂0.001)improved through increased pellet mill feeding rate level.In addition,the machine pelleting efficiency was found to be significantly affected by all studied variables and their interactions.While the total power consumption of the machine showed no variations under the impact of the tested factors or with any of their combinations.Regarding the pellet physical quality indices,all broiler diets with all selected FD and lower FR had the maximum durability and bulk density levels.Furthermore,lower feeding rates were associated with higher hardness degrees.The lowest production costs were substantially correlated with high FR and intermediate FD(5 mm).Furthermore,production costs were determined to be reduced in finisher broiler diets under different feeding rates.Moreover,manufacturing costs of finisher broiler meals were observed to decrease in several feeding rates.Overall,these findings indicate the capabilities of producing high-quality pellets and reducing the needed production costs by optimizing feeding rates to 2 Mg/h and 2 mm fineness in broiler diets.展开更多
A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology an...A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive(Fc)and flexural strength(Ff),and porosity at various water/cement ratios.The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure.By increasing cement fineness by about 25%of,the ITZ thickness of CMSs was reduced by about 30%and Fc was increased by 7%–52%and Ff by 19%–40%.These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.展开更多
The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated int...The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated into robotic capsule endoscopy to augment diagnostic capabilities.In this study,we propose a magnetically driven biopsy robot based on a Kresling origami.Considering the bistable properties of Krelsing origami and the elasticity of the creases,a foldable structure of the robot with constant force characteristics is designed.The folding motion of the structure is used to deploy the needle into the target tissue.The robot is capable of performing rolling motion under the control of an external magnetic drive system,and a fine needle biopsy technique is used to collect deep tissue samples.We also conduct in vitro rolling experiments and sampling experiments on apple tissues and pork tissues,which verify the performance of the robot.展开更多
A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorptio...A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.展开更多
Hanyu Xu 1,Xuedan Song 1,*,Qing Zhang 1,Chang Yu 1,Jieshan Qiu 1,2,*1 Liaoning Key Lab for Energy Materials and Chemical Engineering,State Key Laboratory of Fine Chemicals,School of Chemical Engineering,Dalian Univers...Hanyu Xu 1,Xuedan Song 1,*,Qing Zhang 1,Chang Yu 1,Jieshan Qiu 1,2,*1 Liaoning Key Lab for Energy Materials and Chemical Engineering,State Key Laboratory of Fine Chemicals,School of Chemical Engineering,Dalian University of Technology,Dalian 116024,Liaoning Province,China.展开更多
This paper addresses the potential use of Sugar Cane Bagasse Ash(SCBA)as a pozzolanic material for partial cement replacement in concrete mixtures.Cement mortars containing SCBA having five different particle size dis...This paper addresses the potential use of Sugar Cane Bagasse Ash(SCBA)as a pozzolanic material for partial cement replacement in concrete mixtures.Cement mortars containing SCBA having five different particle size distributions at a replacement rate of 20%by weight were used to study the chemical and physical pozzolanic properties of SCBA.The durability of SCBA replaced mortars was also evaluated.SCBA with 0%retained on sieve No.325 was used to replace 20%by weight of cement and create mortar specimens that were subjected to sulfuric acid attack of varying concentrations(1%–3%by weight of water).The tested samples were observed to check visual distortion,mass loss,and compressive strength loss at 1,7,14,28,and 56 d of acidic exposure,and the results were compared to those for the control sample,that was lime water cured,at the same ages.The SCBA sets were found to meet the requirements for pozzolan class N specified by ASTM C 618.Mortars containing SCBA with 0%or 15%retention produced better compressive strength than the control mortars after 28 d.Additionally,X-ray fluorescence and X-ray diffraction analysis showed that the SCBA had favorable chemical properties for a pozzolanic material.Furthermore,SCBA replaced samples at all ages showed improved resistance against acidic attack relative to that of the control mortars.Maximum deterioration was seen for 3%concentrated solution.This study’s findings demonstrated that SCBA with an appropriate fineness could be used as a pozzolanic material,consistently with ASTM C 618.展开更多
Fine particulate matter(particulate matter with a diameter of 2.5μm or less;PM2.5)causes millions of premature deaths globally1,but not all particles are equally harmful2-4.Current air-pollution control strategies,pr...Fine particulate matter(particulate matter with a diameter of 2.5μm or less;PM2.5)causes millions of premature deaths globally1,but not all particles are equally harmful2-4.Current air-pollution control strategies,prioritizing PM2.5 mass reduction,have provided considerable health benefits but further refinements based on differences in the toxicity of various emission sources may provide greater benefits5-7.Here we integrated field measurements with air-quality modelling to assess the unequal toxicities of PM2.5 from various anthropogenic sources.展开更多
This study embarks on an explorative investigation into the effects of typical concentrations and varying particle sizes of fine grits(FG,the involatile portion of suspended solids)and fine debris(FD,the volatile yet ...This study embarks on an explorative investigation into the effects of typical concentrations and varying particle sizes of fine grits(FG,the involatile portion of suspended solids)and fine debris(FD,the volatile yet unbiodegradable fraction of suspended solids)within the influent on themixed liquor volatile suspended solids(MLVSS)/mixed liquor suspended solids(MLSS)ratio of an activated sludge system.Through meticulous experimentation,it was discerned that the addition of FG or FD,the particle size of FG,and the concentration of FD bore no substantial impact on the pollutant removal efficiency(denoted by the removal rate of COD and ammonia nitrogen)under constant operational conditions.However,a notable decrease in the MLVSS/MLSS ratio was observed with a typical FG concentration of 20 mg/L,with smaller FG particle sizes exacerbating this reduction.Additionally,variations in FD concentrations influenced both MLSS andMLVSS/MLSS ratios;a higher FD concentration led to an increased MLSS and a reduced MLVSS/MLSS ratio,indicating FD accumulation in the system.A predictive model for MLVSS/MLSS was constructed based on quality balance calculations,offering a tool for foreseeing the MLVSS/MLSS ratio under stable long-term influent conditions of FG and FD.This model,validated using data from the BXH wastewater treatment plant(WWTP),showcased remarkable accuracy.展开更多
Cattle carcass traits are economically important in the beef industry.In the present study,we identified 184 significant genes and 822 alternative genes for 7 carcass traits using genome-wide association studies(GWAS)...Cattle carcass traits are economically important in the beef industry.In the present study,we identified 184 significant genes and 822 alternative genes for 7 carcass traits using genome-wide association studies(GWAS)in 1,566 Huaxi beef cattle.We then identified 5,860 unique cis-genes and 734 trans-genes in 227 longissimus dorsi muscle(LDM)samples to better understand the genetic regulation of gene expression.Our integration study of the GWAS and cis-eQTL analysis detected 13 variants regulating 12 identical genes,in which one variant was also detected in fine-mapping analysis.Moreover,using a transcriptome-wide association study(TWAS),we identified 4 genes(TTC30B,HMGA1,PRKD3 and FXN)that were significantly related to carcass chest depth(CCD),carcass length(CL),carcass weight(CW)and dressing percentage(DP).This study identified variants and genes that may be useful for understanding the molecular mechanism of carcass traits in beef cattle.展开更多
基金Major Achievements Transformation and Industrialization Projects of Central Universities in Beijing,Grant/Award Number:ZDZH20141141301National Natural Science Foundations of China,Grant/Award Numbers:51608521,51809264+1 种基金Beijing Urban Construction Group CoOutstanding Young Teachers Program by CUMTB,Grant/Award Number:2022YQLJ01。
文摘Excavation gaps around the front shield can be generated during shield construction,resulting in significant ground settlement.Traditional synchronous grouting slurries are unsuitable forfilling these gaps during tunneling under existing subway lines.To address this issue,experiments are conducted on mix characteristics and hardening properties of slurries with variations infineness and contents offly ash.The experimental and computed tomography scan results yield the followingfindings:(1)fly ash with highfineness can effectively reduce the early strength of slurries and enhance their injectability.This improves thefilling effect on micropores in the slurry and ultimately enhances thefinal hardening strength.(2)Fineness offly ash controls the process of slurry hydration.The higher thefineness offly ash,the more visible the exothermic hydration of slurry and the earlier the highest temperature peak appears.(3)Fly ash with highfineness can effectively increase the density and consolidation rate of slurries,resulting in greater improvement in slurry strength,particularly when the ratio offly ash to cement(mf/mc)is 0.75.(4)Fly ash with highfineness can effectively decrease the likelihood of appearance of pores in the slurry,optimize the pore structure,and enhance the strength of slurries after consolidation.
基金Funding by Hong Kong Grant Council(HKUST6226/01E)andtheKey Project of Chinese Ministry of Education(No.105125)
文摘The influence of calcium sulfate state and fineness of cement on hydration of Portland cement was studied using electrical resistivity measurement. The bulk resistivity curve of the paste from the abnormal cement mainly with hemihydrate had a characteristic abnormal peak and rapid increase in early period. The resistivity measurement technique can be used to discriminate abnormal setting. For normal cement with gypsum, the increase in fineness of the Portland cement decreases the minimum resistivhy due to a higher ionic concentration and increases the 24 hour resistivity due to a reduction in macroscopic pore size. The setting time, compressive strength, pore structure of pastes made from different cements were carried out to compare the influence of water to cement ratio, calcium sulfate state and fineness. It is found that the electrical and mechanical properties are strongly affected by the initial porosity, the presence of hemihydrate or gypsum, and the fineness of cement.
基金This work is supported by the Major State Basic Research Development Program of China(2004CB117300)the National Natural Science Foundation of China (30530490)
文摘Cotton,the most important natural fiber crop in the world,is a mainstay in China's economy.However,for over two decades,cotton yields both in China and U.S.have been at a plateau.
文摘In recent years, the usages of by-products and wastes in industry have become more important. The importance of the sustainable development is also of increasing. The utilizations of wastes, as mineral admixture or fine aggregate, reduce the consumption of the natural resources and improve the durability of concrete. In this study, the effect of the fineness on the high temperature and sulphate resistances of concrete mortar specimens, produced with ground granulated blast-furnace slag (GBFS) replacing cement, is investigated. The compressive and flexural strength test results for all series related to durability effects, exposing temperature and solutions, exposure times for these durability effects, slag content and fineness are discussed. Conse- quently, the optimum slag contents are determined for producing the sulphate and high temperature resistant mortars.
基金This work is financially supported by the Key Scientific and Technological Project of Hubei Province (No. 971P0216).
文摘The effect of trace Ti and Y on Au-based alloys with 990 fineness has beeninvestigated systematically by means of tensile test, hardness test, scanning and transmissionelectron microscopic analyses. These experimental results show that trace Ti and Y can significantlyimprove the mechanical properties of Au-based alloys with 990 fineness because Ti and Y cansignificantly refine matrix grains, and solid solution strengthening, work strengthening andprecipitation strengthening occur during mechanical heat treatment.
基金Funded by National Natural Science Foundation of China (Nos.51808272, 51768033)Gansu Youth Science and Technology Fund (No.21JR7RA330)+2 种基金Tianyou Youth Talent Lift Program of Lanzhou Jiaotong University,Gansu Province Youth Talent Support Project (No. GXH20210611-10)Key R&D Capability Enhancement Project of Gansu Provincial Finance Department (No. 2019zx-09)the Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China (No. IRT_15R29)。
文摘The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).The Pearson correlation analysis method was used to calculate the correlation coefficient between the porosity and age of cement paste,the specific surface area of GGBS and the content of GGBS.The test results exhibited that the porosity of the cement paste with different ageing durations gradually decreased on increasing the content and specific surface area of GGBS.The content and specific surface area of GGBS had a negligible effect on the 1-10 nm size gel pores in the cement paste,whereas,had a significant effect on the 10-100 nm size capillary pores.In addition,these parameters did not affect the final most probable pore size of the cement paste.The correlation between age and porosity was the largest,and the correlation between GGBS content and porosity was greater than that between GGBS specific surface area and porosity.Moreover,a modified pore structure model was successfully developed to effectively predict the pore structure of the GGBS based cement paste.
文摘The paper deals with the theoretic relationship betweenfineness of man-made fibers blended with natural fibersand regularities of the yarns made from them.Throughestablishment of the theory model and digitally analysisusing Matlab software,the optimum fineness of the fi-bers could be figured out.
基金This research was supported by a grant from the National Research Foundation of Korea provided by the government of Republic of Korea(2019R1A2C1085686).
文摘Soyang Lake is the largest lake in Republic of Korea bordering Chuncheon,Yanggu,and Inje in Gangwon Province.It is widely used as an environmental resource for hydropower,flood control,and water supply.Therefore,we conducted a survey of the floodplain of Soyang Lake to analyze the sediments in the area.We used global positioning system(GPS)data and aerial photography to monitor sediment deposits in the Soyang Lake floodplain.Data from three GPS units were compared to determine the accuracy of sampling location measurement.Sediment samples were collected at three sites:two in the eastern region of the floodplain and one in the western region.A total of eight samples were collected:Three samples were collected at 10 cm intervals to a depth of 30 cm from each site of the eastern sampling point,and two samples were collected at depths of 10 and 30 cm at the western sampling point.Samples were collected and analyzed for vertical and horizontal trends in particle size and moisture content.The sizes of the sediment samples ranged from coarse to very coarse sediments with a negative slope,which indicate eastward movement from the breach.The probability of a breach was indicated by the high water content at the eastern side of the floodplain,with the eastern sites showing a higher probability than the western sites.The results of this study indicate that analyses of grain fineness,moisture content,sediment deposits,and sediment removal rates can be used to understand and predict the direction of breach movement and sediment distribution in Soyang Lake.
文摘In order to precisely measure the diameters for obtaining the fineness of rolling raw silk, the physical features of raw silk are analyzed. By means of Fresnel principle, diffractions caused by different transparent raw silk filaments are analyzed and simulated. Image data of raw silk filament measured by digital CMOS camera are analyzed and processed for obtaining the precise diameters of the filamerit with the relative error of less than 1%. On the assumption of appropriate elliptic cross-section of the filament, the cross-section area is calculated as the fineness of the filament. Measurement experiments are carded out. Finally, some suggestions are proposed for photoelectric measuring the fineness of raw silk.
文摘Pancreatic cysts are mostly incidental findings on computed tomography or magnetic resonance imaging scans,with few patients presenting with abdominal pain or other symptoms.The accurate diagnosis of cysts is important as management depends on the type(neoplastic or non-neoplastic).Cross-sectional imaging is fast being replaced with endoscopic ultrasound(EUS)and various techniques based on that such as EUS-guided fine needle aspiration,EUS-guided needle confocal laser endomicroscopy,EUS-through-the-needle biopsy,and contrast-enhanced EUS.Clinical studies have reported varying diagnostic and adverse event rates with these modalities.In addition,American,European,and Kyoto guidelines for the diagnosis and management of pancreatic cysts have provided different recommendations.In this editorial,we elaborate on the clinical guidelines,recent studies,and comparison of different endoscopic methods for the diagnosis of pancreatic cysts.
基金financially supported by National Natural Science Foundation of China(32301800,32301923 and 32072053)Wheat Industrial Technology System of Shandong Province(SDAIT-01-01)Key Research and Development Project of Shandong Province(2022LZG002-4,2023LZGC009-4-4).
文摘Powdery mildew negatively impacts wheat yield and quality.Emmer wheat(Triticum dicoccum),an ancestral species of common wheat,is a gene donor for wheat improvement.Cultivated emmer accession H1-707 exhibited all-stage resistance to powdery mildew over consecutive years.Genetic analysis of H1-707 at the seedling stage revealed a dominant monogenic inheritance pattern,and the underlying gene was designated Pm71.By employing bulked segregant exome sequencing(BSE-Seq)and using 2000 F2:3 families,Pm71 was fine mapped to a 336-kb interval on chromosome arm 6AS by referencing to the durum cv.Svevo RefSeq 1.0.Collinearity analysis revealed high homology in the candidate interval between Svevo and six Triticum species.Among six high-confidence genes annotated within this interval,TRITD6Av1G005050 encoding a GDSL esterase/lipase was identified as a key candidate for Pm71.
文摘The effect of a machine feeding rate(FR;1,1.5 and 2 Mg/h)and/or three levels of selected fineness degree(FD;3,5 and 7 mm)on machine performance,pellet physical parameters,required energy and production cost of three main types of broilers diets were examined in this experiment.The examined broiler diets were formulated to meet the Ross 308 strain requirements.A complete factorial design(3×3×3)was used to identify the effects of studied factors on the pellet mill machine and pellet production.The obtained results indicated that the pellet mill productivity significantly(p˂0.001)improved through increased pellet mill feeding rate level.In addition,the machine pelleting efficiency was found to be significantly affected by all studied variables and their interactions.While the total power consumption of the machine showed no variations under the impact of the tested factors or with any of their combinations.Regarding the pellet physical quality indices,all broiler diets with all selected FD and lower FR had the maximum durability and bulk density levels.Furthermore,lower feeding rates were associated with higher hardness degrees.The lowest production costs were substantially correlated with high FR and intermediate FD(5 mm).Furthermore,production costs were determined to be reduced in finisher broiler diets under different feeding rates.Moreover,manufacturing costs of finisher broiler meals were observed to decrease in several feeding rates.Overall,these findings indicate the capabilities of producing high-quality pellets and reducing the needed production costs by optimizing feeding rates to 2 Mg/h and 2 mm fineness in broiler diets.
文摘A new insight into the interfacial transition zone(ITZ)in cement mortar specimens(CMSs)that is influenced by cement fineness is reported.The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive(Fc)and flexural strength(Ff),and porosity at various water/cement ratios.The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure.By increasing cement fineness by about 25%of,the ITZ thickness of CMSs was reduced by about 30%and Fc was increased by 7%–52%and Ff by 19%–40%.These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.
基金supported by the National Natural Science Foundation of China(Grant Nos.51805047 and 52175003)the Outstanding Youth Program of Hunan Education Department(Grant No.23B0335)the Natural Science Foundation of Hunan Province(Grant Nos.2023JJ30021 and 2023JJ50077).
文摘The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated into robotic capsule endoscopy to augment diagnostic capabilities.In this study,we propose a magnetically driven biopsy robot based on a Kresling origami.Considering the bistable properties of Krelsing origami and the elasticity of the creases,a foldable structure of the robot with constant force characteristics is designed.The folding motion of the structure is used to deploy the needle into the target tissue.The robot is capable of performing rolling motion under the control of an external magnetic drive system,and a fine needle biopsy technique is used to collect deep tissue samples.We also conduct in vitro rolling experiments and sampling experiments on apple tissues and pork tissues,which verify the performance of the robot.
基金supported by the National Natural Science Foundation of China(22168032)the National Key Research and Development Program of China(2023YFC3904302,2023YFB4103500)the Key Projects of Ning Dong Energy and Chemical Industry Base(2023NDKJXMLX022).
文摘A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.
文摘Hanyu Xu 1,Xuedan Song 1,*,Qing Zhang 1,Chang Yu 1,Jieshan Qiu 1,2,*1 Liaoning Key Lab for Energy Materials and Chemical Engineering,State Key Laboratory of Fine Chemicals,School of Chemical Engineering,Dalian University of Technology,Dalian 116024,Liaoning Province,China.
文摘This paper addresses the potential use of Sugar Cane Bagasse Ash(SCBA)as a pozzolanic material for partial cement replacement in concrete mixtures.Cement mortars containing SCBA having five different particle size distributions at a replacement rate of 20%by weight were used to study the chemical and physical pozzolanic properties of SCBA.The durability of SCBA replaced mortars was also evaluated.SCBA with 0%retained on sieve No.325 was used to replace 20%by weight of cement and create mortar specimens that were subjected to sulfuric acid attack of varying concentrations(1%–3%by weight of water).The tested samples were observed to check visual distortion,mass loss,and compressive strength loss at 1,7,14,28,and 56 d of acidic exposure,and the results were compared to those for the control sample,that was lime water cured,at the same ages.The SCBA sets were found to meet the requirements for pozzolan class N specified by ASTM C 618.Mortars containing SCBA with 0%or 15%retention produced better compressive strength than the control mortars after 28 d.Additionally,X-ray fluorescence and X-ray diffraction analysis showed that the SCBA had favorable chemical properties for a pozzolanic material.Furthermore,SCBA replaced samples at all ages showed improved resistance against acidic attack relative to that of the control mortars.Maximum deterioration was seen for 3%concentrated solution.This study’s findings demonstrated that SCBA with an appropriate fineness could be used as a pozzolanic material,consistently with ASTM C 618.
文摘Fine particulate matter(particulate matter with a diameter of 2.5μm or less;PM2.5)causes millions of premature deaths globally1,but not all particles are equally harmful2-4.Current air-pollution control strategies,prioritizing PM2.5 mass reduction,have provided considerable health benefits but further refinements based on differences in the toxicity of various emission sources may provide greater benefits5-7.Here we integrated field measurements with air-quality modelling to assess the unequal toxicities of PM2.5 from various anthropogenic sources.
基金supported by the National Special Project for Science and Technology on Water Pollution Control and Management(No.2017ZX07102-003)the Fundamental Research Funds for the Central Universities,and the Research Funds of Renmin University of China(No.2020030257).
文摘This study embarks on an explorative investigation into the effects of typical concentrations and varying particle sizes of fine grits(FG,the involatile portion of suspended solids)and fine debris(FD,the volatile yet unbiodegradable fraction of suspended solids)within the influent on themixed liquor volatile suspended solids(MLVSS)/mixed liquor suspended solids(MLSS)ratio of an activated sludge system.Through meticulous experimentation,it was discerned that the addition of FG or FD,the particle size of FG,and the concentration of FD bore no substantial impact on the pollutant removal efficiency(denoted by the removal rate of COD and ammonia nitrogen)under constant operational conditions.However,a notable decrease in the MLVSS/MLSS ratio was observed with a typical FG concentration of 20 mg/L,with smaller FG particle sizes exacerbating this reduction.Additionally,variations in FD concentrations influenced both MLSS andMLVSS/MLSS ratios;a higher FD concentration led to an increased MLSS and a reduced MLVSS/MLSS ratio,indicating FD accumulation in the system.A predictive model for MLVSS/MLSS was constructed based on quality balance calculations,offering a tool for foreseeing the MLVSS/MLSS ratio under stable long-term influent conditions of FG and FD.This model,validated using data from the BXH wastewater treatment plant(WWTP),showcased remarkable accuracy.
基金supported by the National Natural Science Foundation of China(32372833 and 32202652)the Agricultural Science and Technology Innovation Program in the Chinese Academy of Agricultural Sciences(ASTIP-IAS03 and CAASZDRW202102)+1 种基金the Program of National Beef Cattle and Yak Industrial Technology System,China(CARS-37)the Science and Technology Project of Inner Mongolia Autonomus Region,China(2020GG0210)。
文摘Cattle carcass traits are economically important in the beef industry.In the present study,we identified 184 significant genes and 822 alternative genes for 7 carcass traits using genome-wide association studies(GWAS)in 1,566 Huaxi beef cattle.We then identified 5,860 unique cis-genes and 734 trans-genes in 227 longissimus dorsi muscle(LDM)samples to better understand the genetic regulation of gene expression.Our integration study of the GWAS and cis-eQTL analysis detected 13 variants regulating 12 identical genes,in which one variant was also detected in fine-mapping analysis.Moreover,using a transcriptome-wide association study(TWAS),we identified 4 genes(TTC30B,HMGA1,PRKD3 and FXN)that were significantly related to carcass chest depth(CCD),carcass length(CL),carcass weight(CW)and dressing percentage(DP).This study identified variants and genes that may be useful for understanding the molecular mechanism of carcass traits in beef cattle.
