With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, ...With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.展开更多
Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development.Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gas...Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development.Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis.Fibrous materials with unique flexibility,processability,multifunctionality,and practicability have been widely applied for fibrous materials-based hydroelectricity generation(FHG).In this review,the power generation mechanisms,design principles,and electricity enhancement factors of FHG are first introduced.Then,the fabrication strategies and characteristics of varied constructions including 1D fiber,1D yarn,2D fabric,2D membrane,3D fibrous framework,and 3D fibrous gel are demonstrated.Afterward,the advanced functions of FHG during water harvesting,proton dissociation,ion separation,and charge accumulation processes are analyzed in detail.Moreover,the potential applications including power supply,energy storage,electrical sensor,and information expression are also discussed.Finally,some existing challenges are considered and prospects for future development are sincerely proposed.展开更多
In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order hom...In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order homogenization(ROH)approach.The ROH method typically involves solving multiple finite element problems under periodic conditions to evaluate elastic strain and eigenstrain influence functions in an‘off-line’stage,which offers substantial cost savings compared to direct computational homogenization methods.Due to the unique structure of the fibrous unit cell,“off-line”stage calculation can be eliminated by influence functions obtained analytically.Introducing the standard solid model to the ROH method enables the creation of a comprehensive analytical homogeneous viscoelastic constitutive model.This method treats fibrous composite materials as homogeneous,anisotropic viscoelastic materials,significantly reducing computational time due to its analytical nature.This approach also enables precise determination of a homogenized anisotropic relaxation modulus and accurate capture of various viscoelastic responses under different loading conditions.Three sets of numerical examples,including unit cell tests,three-point beam bending tests,and torsion tests,are given to demonstrate the predictive performance of the homogenized viscoelastic model.Furthermore,the model is validated against experimental measurements,confirming its accuracy and reliability.展开更多
The multiscale computational method with asymptotic analysis and reduced-order homogenization(ROH)gives a practical numerical solution for engineering problems,especially composite materials.Under the ROH framework,a ...The multiscale computational method with asymptotic analysis and reduced-order homogenization(ROH)gives a practical numerical solution for engineering problems,especially composite materials.Under the ROH framework,a partition-based unitcell structure at the mesoscale is utilized to give a mechanical state at the macro-scale quadrature point with pre-evaluated influence functions.In the past,the“1-phase,1-partition”rule was usually adopted in numerical analysis,where one constituent phase at the mesoscale formed one partition.The numerical cost then is significantly reduced by introducing an assumption that the mechanical responses are the same all the time at the same constituent,while it also introduces numerical inaccuracy.This study proposes a new partitioning method for fibrous unitcells under a reduced-order homogenization methodology.In this method,the fiber phase remains 1 partition,but the matrix phase is divided into 2 partitions,which refers to the“12”partitioning scheme.Analytical elastic influence+functions are derived by introducing the elastic strain energy equivalence(Hill-Mandel condition).This research also obtains the analytical eigenstrain influence functions by alleviating the so-called“inclusion-locking”phenomenon.In addition,a numerical approach to minimize the error of strain energy density is introduced to determine the partitioning of the matrix phase.Several numerical examples are presented to compare the differences among direct numerical simulation(DNS),“11”,and“12”partitioning schemes.The numerical simulations show improved++numerical accuracy by the“12”partitioning scheme.展开更多
BACKGROUND A solitary fibrous tumor(SFT)is often located in the pleura,while SFT of the pancreas is extremely rare.Here,we report a case of SFT of the pancreas and discuss imaging,histopathology,and immunohistochemist...BACKGROUND A solitary fibrous tumor(SFT)is often located in the pleura,while SFT of the pancreas is extremely rare.Here,we report a case of SFT of the pancreas and discuss imaging,histopathology,and immunohistochemistry for accurate diagnosis and treatment.CASE SUMMARY A 54-year-old man presented to our hospital with pancreatic occupancy for over a month.There were no previous complaints of discomfort.His blood pressure was normal.Blood glucose,tumor markers,and enhanced computed tomography(CT)suggested a malignant tumor.Because the CT appearance of pancreatic cancer varies,we could not confirm the diagnosis;therefore,we performed endoscopic ultrasound-guided fine-needle biopsy(EUS-FNB).Pathology and immunohistochemistry were consistent with SFT of the pancreas.The posto-perative pathology and immunohistochemistry were consistent with the puncture results.The patient presented for a follow-up examination one month after discharge with no adverse effects.CONCLUSION Other diseases must be excluded in patients with a pancreatic mass that cannot be diagnosed.CT and pathological histology have diagnostic value for pancreatic tumors.Endoscopic puncture biopsy under ultrasound can help diagnose pancreatic masses that cannot be diagnosed preoperatively.Surgery is an effective treatment for SFT of the pancreas;however,long-term follow-up is strongly recommended because of the possibility of malignant transformation of the tumor.展开更多
Owing to the significant increase in air pollutants and the spread of infectious diseases,it seems that the use of face masks will become an essential item in human societies.Therefore,there is a need to conduct more ...Owing to the significant increase in air pollutants and the spread of infectious diseases,it seems that the use of face masks will become an essential item in human societies.Therefore,there is a need to conduct more research to develop novel types of respirators utilizing upto-date science such as nanotechnology.In this study,we fabricated a nanocomposite fibrous filter containing modified graphene oxide(GO)and zinc oxide(ZnO)nanoparticles.This layer was used as an active filter for absorbing and removing air pollutants,such as suspended submicron particles(below 2.5 microns)and CO_(2),NO_(2),and SO_(2)gases.The synthesized nanostructures and fibrous filters were characterized by different analysis(FTIR,XRD,TGA,and FESEM),and the performance of the filters was surveyed by tests such as pressure drop,CO_(2),NO_(2),SO_(2)gas rejection,and particulate removal.The results showed that the stabilization of the modified GO and ZnO nanostructures on the fibrous filter improved the effectiveness of this filter as a mask for removing toxic particles and gases,and the filter containing nanoparticles had the best performance.展开更多
BACKGROUND Solitary fibrous tumors(SFT)are rare spindle cell tumors that are usually benign.A total of 10 cases of SFTs in the upper esophagus have ever been reported.Here,we report the anesthetic management of a pati...BACKGROUND Solitary fibrous tumors(SFT)are rare spindle cell tumors that are usually benign.A total of 10 cases of SFTs in the upper esophagus have ever been reported.Here,we report the anesthetic management of a patient with a large isolated fibrous tumor of the upper esophagus compressing the tracheal membrane.We also provide a literature review of the current research.CASE SUMMARY We report the case of a 49 year old male with“cough aggravation and wheezing after exercise”,who underwent esophagectomy for a large isolated fibrous tumor compressing the tracheal membrane in the upper esophagus.We advise the use of a single-lumen tube with a blocker in patients with difficult airways to reduce the incidence of airway injury and fibrinoscopy at all stages of the perioperative period to guide airway management.This case study is the first report of the anesthetic management of a large,isolated fibrous tumor compressing the tracheal membrane in the upper esophagus.CONCLUSION This rare case emphasizes the importance of perioperative management of anesthesia in patients with large isolated fibrous tumors of the upper esophagus that compress the tracheal membrane.The use of blocker reduce the incidence of airway injury and fibrinoscopy at the perioperative period to guide airway mana-gement.展开更多
BACKGROUND Solitary fibrous tumor(SFT)is a remarkably uncommon mesenchymal tumor.STAT6 level and a combination of clinical,pathological,and molecular features are required to arrive at a proper diagnosis.CASE SUMMARY ...BACKGROUND Solitary fibrous tumor(SFT)is a remarkably uncommon mesenchymal tumor.STAT6 level and a combination of clinical,pathological,and molecular features are required to arrive at a proper diagnosis.CASE SUMMARY In this report,we present an intriguing case involving a 43-year-old woman who initially exhibited symptoms of a bleeding retroperitoneal tumor,initially resembling a gastrointestinal stromal tumor,but later confirmed as an SFT.However,a year later,what was initially believed to be a recurrence of her SFT was instead identified as a desmoid tumor.CONCLUSION Distinguishing SFT from other tumors was pivotal.Correcting misdiagnoses of tumor type initially and of recurrence later was necessary for appropriate treatment of the correct desmoid type.展开更多
Background: Dermatofibroma usually occurs on the extremities or trunk as a common and benign skin tumor. The identification of typical dermatofibroma is uncomplicated, although it can be challenge due to its wide rang...Background: Dermatofibroma usually occurs on the extremities or trunk as a common and benign skin tumor. The identification of typical dermatofibroma is uncomplicated, although it can be challenge due to its wide range of presentations and histological variations. Objective: This study was undertaken to evaluate the clinical and histopathological characteristics of 147 Cases of Dermatofibroma. Methods: This is a retrospective study of 147 biopsy specimens of 124 patients who were diagnosed with dermatofibroma in the Department of Dermatology and the Department of Pathology at the Seventh Affiliated Hospital of Sun Yat-sen University between January 2009 and April 2024. All case were retrieved from the saved medical records. Results: Ages of the 124 Dermatofibroma-affected individuals ranged from 11 to 61 years with a male-to-female ratio of 1:1.7. Over 80% of the case occurred between the ages of 20 and 49 years, 61.9% of the lesions were found on the extremities. The duration of the cases varied from 17 days to 30 years and half of lesions (58.2%) persisted for less than two years. Over 60% of the lesions were found on the extremities. The diameter of the tumors ranged between 0.3 cm and 5 cm, with most tumors measuring less than or equal to 2 cm (85.00%). Cutaneous masses or dermatofibroma was the most common clinical diagnosis. Most tumors (79.6%) were asymptomatic. Cutaneous masses or dermatofibroma was the most common clinical diagnosis. Prior to the surgical procedure, 57 cases were suspected to be “DF”, 55 cases were suspected to be “cutaneous masses”. Immunohistochemical staining revealed positive expression of SMA, while the negative rate of CD34 was found to be 66.67%. No diffuse CD34 positivity was observed in all tumors. Conclusion: Variations in clinical features, pathological manifestations, and immunohistochemical results of DF pose challenges for accurate diagnosis. A comprehensive understanding of its clinical and pathological characteristics is crucial for precise identification. Incorporating immunohistochemical analysis can help prevent misdiagnosis.展开更多
[Objectives]To study and optimize the process conditions of enzymatic hydrolysis technology for extracting polysaccharides from Pseudostellaria heterophylla fibrous roots and its application in workshop pilot tests.[M...[Objectives]To study and optimize the process conditions of enzymatic hydrolysis technology for extracting polysaccharides from Pseudostellaria heterophylla fibrous roots and its application in workshop pilot tests.[Methods]P.heterophylla fibrous roots were taken as the matrix material,and Box Behnken design was used to analyze the extraction time,composite enzyme addition amount,and liquid-solid ratio for response surface optimization experiments,and then applied to the pilot extraction of P.heterophylla fibrous roots.[Results]Response surface analysis showed that all factors had a significant impact on the experimental indicators.The optimal extraction process conditions for polysaccharides from P.heterophylla fibrous roots were extraction time of 2.7 h,compound enzyme addition of 2.5%,and liquid-solid ratio of 32.The yield of polysaccharides from P.heterophylla fibrous roots was 4.83%.The water extraction process of P.heterophylla fibrous roots extraction pilot was used as the control group for response surface optimization of the pilot experiment.The optimization results showed that the extraction time was 3 h,the amount of composite enzyme added was 2.5%,and the liquid-solid ratio was 28.The polysaccharide yield was 4.75%,an increase of 4.63%compared to the control group.[Conclusions]This paper could provide feasibility for the innovation of enzy-matic hydrolysis technology for P.heterophylla fibrous roots and its workshop pilot practice application,as well as a reference for the industrial application of its medicinal resources.展开更多
BACKGROUND Calcifying fibrous tumors(CFTs)are rare mesenchymal lesions that can occur in various sites throughout the body,including the tubular gastrointestinal(GI)tract.AIM To analyze the clinical findings of 36 pat...BACKGROUND Calcifying fibrous tumors(CFTs)are rare mesenchymal lesions that can occur in various sites throughout the body,including the tubular gastrointestinal(GI)tract.AIM To analyze the clinical findings of 36 patients with GI tract CFTs to provide guidance for diagnosis and treatment.METHODS This retrospective study included 36 patients diagnosed with CFTs of the GI tract.We collected demographic and clinical information and conducted regular follow-ups to assess for local recurrence.RESULTS The stomach was the most commonly involved site,accounting for 72.2%of the 36 CFTs.Endoscopic mucosal resection(n=1,2.8%),endoscopic submucosal dissection(n=14,38.9%),endoscopic full-thickness resection(n=16,44.4%),and submucosal tunneling endoscopic resection(n=5,13.9%)were used to resect calcifying fibrous tumors.Overall,34(94.4%)CFTs underwent complete endoscopic resections with a mean procedure time of 39.8±29.8 min.The average maximum diameter of the tumors was 10.6±4.3 cm.No complications,such as bleeding or perforation,occurred during an average hospital stay of 2.9±1.2 d.In addition,two patients developed new growth of CFTs near the primary tumor sites,and none of the patients developed distant metastases during the follow-up period.CONCLUSION GI tract CFTs are rare and typically benign tumors that can be effectively managed with endoscopic procedures.展开更多
Highly porous Si_(3)N_(4)ceramics with unidirectionally aligned pore channels are gaining significant attention across various fields due to their outstanding functional capabilities.However,achieving high strength in...Highly porous Si_(3)N_(4)ceramics with unidirectionally aligned pore channels are gaining significant attention across various fields due to their outstanding functional capabilities.However,achieving high strength in such unidirectional highly porous Si_(3)N_(4)ceramics remains challenging.Herein,we design and fabricate a novel β-Si_(3)N_(4)scaffold composed of directionally aligned lamellar walls with a textured microstructure by directionally freeze casting ofα-Si_(3)N_(4)suspensions with fine elongatedβ-Si_(3)N_(4)seeds addition,followed by liquid phase sintering.During the sintering,the scaffold exhibited anisotropic shrinkage,and fibrousβ-Si_(3)N_(4)grains were synthesized through epitaxial growth on the seeds preferentially oriented or the nuclei originated fromα-Si_(3)N_(4)powders,resulting in the grains aligned parallel to lamellar walls and bridged the walls.Seed additions of 7 to 15 wt%were beneficial for the optimized distribution of the two types of β-Si_(3)N_(4)grains,which contributed to the excellent resistance to bucking-induced fracture for the walls.Compared with other unidirectional porous Si_(3)N_(4)prepared by freeze-casting in the literature,the Si_(3)N_(4)scaffold exhibited out st anding compressive strength,ranging from 2.8 to 22.0 MPa,as the porosity decreased from 94.4%to 88.0%and the density increased from 175 to 365 mg/cm^(3).The lightweight and strong Si_(3)N_(4)scaffolds are promising candidates for engineering applications in harsh environments.展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting proc...A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process.A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere.The results show that a novel SMFM with complex surface morphology and high specific surface area（0.2 m2/g） can be obtained in this way.The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller.The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.展开更多
A novel precursor of nickel-cobalt alloy powders with an appropriate Ni to Co molar ratio was prepared under selectively synthetic conditions. The composition and morphology of the precursor were characterized by X-ra...A novel precursor of nickel-cobalt alloy powders with an appropriate Ni to Co molar ratio was prepared under selectively synthetic conditions. The composition and morphology of the precursor were characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, Fourier transform infrared spectrometry （FT-IR） and energy dispersive spectrometry （EDS）. The effects of pH value, reaction temperature, metal ion concentrations and surfactant on the morphology and the dispersion of precursor were investigated. The results show that the morphology of precursor depends on ammonia content in the precursor. A fibriform precursor is a complicated ammonia-containing nickel-cobalt oxalate. The uniform shape-controlled fibrous precursor is obtained under the following optimum conditions： ammonia as complex agent as well as pH adjustor, oxalate as coprecipitator, 50-65 °C of reaction temperature, 0.5-0.8 mol/L of total concentration of Ni2＋ and Co2＋, PVP as dispersant, and pH 8.0-8.4.展开更多
Fibrous particulate precursor was obtained by precipitation transformation in the ternary solution system of ammonium oxalate, nickel chloride and ammonia. The composition and morphology of precursor were characterize...Fibrous particulate precursor was obtained by precipitation transformation in the ternary solution system of ammonium oxalate, nickel chloride and ammonia. The composition and morphology of precursor were characterized by XRD, SEM, IR and DTA/TGA analyses. The results show that the chemical composition and morphology of precursor precipitates at pH=8.4？8.8 are different from those of precursor precipitates at pH=6.0, and the mechanisms of the thermal decomposition of the precursors are different. The effects of various conditions in the process of thermal decomposition, including precursor morphology, atmosphere, temperature and time on the morphology and dispersion degree of obtained nickel powders were studied in detail. The final product inherits the morphology of precursor when the thermal decomposition is conducted under a weakly reducing atmosphere at temperature range of 400？440 °C for 30 min. Fibrous nickel powder can be produced with good dispersion, and its shape changes from smooth, straight and compact fiber into loose and curved fiber with rough surface.展开更多
Calcifying fibrous tumor(CFT)is a rare mesenchymal lesion that has been documented throughout the gastrointestinal tract.Gastrointestinal CFTs may occur at virtually any age,with a predilection for adults and for fema...Calcifying fibrous tumor(CFT)is a rare mesenchymal lesion that has been documented throughout the gastrointestinal tract.Gastrointestinal CFTs may occur at virtually any age,with a predilection for adults and for females.They occur most commonly in the stomach and the small and large intestines.CFTs are most often found incidentally,cured by local resection,and have a low risk of recurrence.Histology shows three characteristic features:Spindle cell proliferations within a densely hyalinized stroma,scattered calcifications,and lymphoplasmacytic inflammation.CFTs are immunoreactive for CD34,vimentin and factor XIIIa,helping to distinguish them from other benign mesenchymal neoplasms.The differential diagnosis of CFTs includes sclerosing gastrointestinal stromal tumor,leiomyoma,schwannoma,solitary fibrous tumor,inflammatory myofibroblastic tumor,plexiform fibromyxoma,fibromatosis,sclerosing mesenteritis,and reactive nodular fibrous pseudotumor.The pathogenesis of CFTs remains unclear,but some have hypothesized that they may be linked to IgG4-related disease,inflammatory myofibroblastic lesions,hyaline vascular type Castleman disease,sclerosing angiomatoid nodular transformation of the spleen,or trauma.展开更多
BACKGROUND Solitary fibrous tumor of the liver (SFTL) is a rare occurrence with a low number of cases reported in literature. SFTL is usually benign but, 10%-20% cases are reported to be malignant with a tendency to m...BACKGROUND Solitary fibrous tumor of the liver (SFTL) is a rare occurrence with a low number of cases reported in literature. SFTL is usually benign but, 10%-20% cases are reported to be malignant with a tendency to metastasize. The majority of malignant SFTL cases are associated with a paraneoplastic hypoglycaemia defined as Doege-Potter syndrome. Surgery is the best therapeutic treatment, however, long- life follow-up is recommended. CASE SUMMARY A 74-year-old man, was admitted to the emergency department after a syncopal episode with detection of hypoglycaemia resistant to medical treatment. The computed tomography revealed a solid mass measuring 15 cm of the left liver. An open left hepatectomy was performed with complete resection of tumor. Histopathological analyses confirmed a malignant SFTL. CONCLUSION Large series with long-term follow-up have not been published neither have clinical trials been undertaken. Consequently, the methodical long-term followup of surgically treated SFTLs is strongly recommended.展开更多
BACKGROUND Solitary fibrous tumor(SFT)is a rare fibroblastic mesenchymal neoplasm that affects spindle cell soft tissues with broad-spectrum biological behavior;it is predominantly benign,and rarely metastasizes.SFT o...BACKGROUND Solitary fibrous tumor(SFT)is a rare fibroblastic mesenchymal neoplasm that affects spindle cell soft tissues with broad-spectrum biological behavior;it is predominantly benign,and rarely metastasizes.SFT occurs mainly in the tissue structure of the serosa in the pleura and the thorax,and can be found throughout the body,though extra-thoracic localization,including the cephalic region,is uncommon.We reported the first case of intracranial malignant SFT metastasized to the chest wall.CASE SUMMARY An 81-year-old Japanese man was referred to our hospital due to progressive gait disturbance and appetite loss.His medical history included partial resection due to brain tumor,four times,and 50-Gray radiation therapy at another hospital,starting when he was 74 years old.An unenhanced head computed tomography(CT)scan revealed an 8 cm×5.1 cm×6.5 cm mixed-density mass at the left frontal lobe,accompanying a midline shift,and an unenhanced chest-abdomen CT scan revealed a 6 cm×4.1 cm×6.5 cm low-density mass in the left chest wall.A CT-guided percutaneous lung biopsy was performed,and the pathological findings were SFT corresponding to brain tumor.Finally,the correct diagnosis of his brain tumor in history of past illness revealed to be SFT,and the unremovable tumor,namely present brain lesions enlarged and metastasized to the chest wall.We established a definitive diagnosis of intracranial malignant SFT metastasized to the chest wall.We notified him and his family of the disease,and offered palliative care.He passed away on the 29 th hospital day.CONCLUSION This case suggests the need for careful,detailed examination,and careful followup when encountering patients presenting with a mass.展开更多
We herein reported a 27-year-old woman with a right renal mass for two years.She underwent laparoscopic partial nephrectomy.Immunohistochemical examination of the specimen confirmed the diagnosis of solitary fibrous t...We herein reported a 27-year-old woman with a right renal mass for two years.She underwent laparoscopic partial nephrectomy.Immunohistochemical examination of the specimen confirmed the diagnosis of solitary fibrous tumor by revealing its positive staining for cluster of differentiation(CD)34,epithelial membrane antigen(EMA),B-cell lymphoma-2(Bcl-2)and CD99 in the tumor cells.No adjuvant treatment was carried out.The patient was in good health without local recurrence or metastasis during 2 years of follow-up.Laparoscopic partial nephrectomy for renal solitary fibrous tumor is an alternative treatment to radical nephrectomy.It can provide a good outcome.However,further follow-up and more cases of renal solitary fibrous tumor treated with laparoscopic partial nephrectomy are necessary to compare the oncological outcome with radical nephrectomy.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52373093 and 12072325)the Outstanding Youth Fund of Henan Province(No.242300421062)+1 种基金National Key R&D Program of China(No.2019YFA0706802)the 111 project(No.D18023).
文摘With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.
基金funding support from the National Key Research and Development Program of China(No.2022YFB3805800)the National Natural Science Foundation of China(52173059)+1 种基金The Major Basic Research Project of the Natural Science Foundation of the Jiangsu Higher Education Institutions(21KJA540002)Jiangsu Funding Program for Excellent Postdoctoral Talent(2022ZB555).
文摘Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development.Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis.Fibrous materials with unique flexibility,processability,multifunctionality,and practicability have been widely applied for fibrous materials-based hydroelectricity generation(FHG).In this review,the power generation mechanisms,design principles,and electricity enhancement factors of FHG are first introduced.Then,the fabrication strategies and characteristics of varied constructions including 1D fiber,1D yarn,2D fabric,2D membrane,3D fibrous framework,and 3D fibrous gel are demonstrated.Afterward,the advanced functions of FHG during water harvesting,proton dissociation,ion separation,and charge accumulation processes are analyzed in detail.Moreover,the potential applications including power supply,energy storage,electrical sensor,and information expression are also discussed.Finally,some existing challenges are considered and prospects for future development are sincerely proposed.
基金support by the National Key R&D Program of China(Grant No.2023YFA1008901)the National Natural Science Foundation of China(Grant Nos.11988102,12172009)is gratefully acknowledged.
文摘In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order homogenization(ROH)approach.The ROH method typically involves solving multiple finite element problems under periodic conditions to evaluate elastic strain and eigenstrain influence functions in an‘off-line’stage,which offers substantial cost savings compared to direct computational homogenization methods.Due to the unique structure of the fibrous unit cell,“off-line”stage calculation can be eliminated by influence functions obtained analytically.Introducing the standard solid model to the ROH method enables the creation of a comprehensive analytical homogeneous viscoelastic constitutive model.This method treats fibrous composite materials as homogeneous,anisotropic viscoelastic materials,significantly reducing computational time due to its analytical nature.This approach also enables precise determination of a homogenized anisotropic relaxation modulus and accurate capture of various viscoelastic responses under different loading conditions.Three sets of numerical examples,including unit cell tests,three-point beam bending tests,and torsion tests,are given to demonstrate the predictive performance of the homogenized viscoelastic model.Furthermore,the model is validated against experimental measurements,confirming its accuracy and reliability.
基金funded by the National Key R&D Program of China(Grant No.2023YFA1008901)the National Natural Science Foundation of China(Grant Nos.11988102,12172009)“The Fundamental Research Funds for the Central Universities,Peking University”.
文摘The multiscale computational method with asymptotic analysis and reduced-order homogenization(ROH)gives a practical numerical solution for engineering problems,especially composite materials.Under the ROH framework,a partition-based unitcell structure at the mesoscale is utilized to give a mechanical state at the macro-scale quadrature point with pre-evaluated influence functions.In the past,the“1-phase,1-partition”rule was usually adopted in numerical analysis,where one constituent phase at the mesoscale formed one partition.The numerical cost then is significantly reduced by introducing an assumption that the mechanical responses are the same all the time at the same constituent,while it also introduces numerical inaccuracy.This study proposes a new partitioning method for fibrous unitcells under a reduced-order homogenization methodology.In this method,the fiber phase remains 1 partition,but the matrix phase is divided into 2 partitions,which refers to the“12”partitioning scheme.Analytical elastic influence+functions are derived by introducing the elastic strain energy equivalence(Hill-Mandel condition).This research also obtains the analytical eigenstrain influence functions by alleviating the so-called“inclusion-locking”phenomenon.In addition,a numerical approach to minimize the error of strain energy density is introduced to determine the partitioning of the matrix phase.Several numerical examples are presented to compare the differences among direct numerical simulation(DNS),“11”,and“12”partitioning schemes.The numerical simulations show improved++numerical accuracy by the“12”partitioning scheme.
文摘BACKGROUND A solitary fibrous tumor(SFT)is often located in the pleura,while SFT of the pancreas is extremely rare.Here,we report a case of SFT of the pancreas and discuss imaging,histopathology,and immunohistochemistry for accurate diagnosis and treatment.CASE SUMMARY A 54-year-old man presented to our hospital with pancreatic occupancy for over a month.There were no previous complaints of discomfort.His blood pressure was normal.Blood glucose,tumor markers,and enhanced computed tomography(CT)suggested a malignant tumor.Because the CT appearance of pancreatic cancer varies,we could not confirm the diagnosis;therefore,we performed endoscopic ultrasound-guided fine-needle biopsy(EUS-FNB).Pathology and immunohistochemistry were consistent with SFT of the pancreas.The posto-perative pathology and immunohistochemistry were consistent with the puncture results.The patient presented for a follow-up examination one month after discharge with no adverse effects.CONCLUSION Other diseases must be excluded in patients with a pancreatic mass that cannot be diagnosed.CT and pathological histology have diagnostic value for pancreatic tumors.Endoscopic puncture biopsy under ultrasound can help diagnose pancreatic masses that cannot be diagnosed preoperatively.Surgery is an effective treatment for SFT of the pancreas;however,long-term follow-up is strongly recommended because of the possibility of malignant transformation of the tumor.
文摘Owing to the significant increase in air pollutants and the spread of infectious diseases,it seems that the use of face masks will become an essential item in human societies.Therefore,there is a need to conduct more research to develop novel types of respirators utilizing upto-date science such as nanotechnology.In this study,we fabricated a nanocomposite fibrous filter containing modified graphene oxide(GO)and zinc oxide(ZnO)nanoparticles.This layer was used as an active filter for absorbing and removing air pollutants,such as suspended submicron particles(below 2.5 microns)and CO_(2),NO_(2),and SO_(2)gases.The synthesized nanostructures and fibrous filters were characterized by different analysis(FTIR,XRD,TGA,and FESEM),and the performance of the filters was surveyed by tests such as pressure drop,CO_(2),NO_(2),SO_(2)gas rejection,and particulate removal.The results showed that the stabilization of the modified GO and ZnO nanostructures on the fibrous filter improved the effectiveness of this filter as a mask for removing toxic particles and gases,and the filter containing nanoparticles had the best performance.
文摘BACKGROUND Solitary fibrous tumors(SFT)are rare spindle cell tumors that are usually benign.A total of 10 cases of SFTs in the upper esophagus have ever been reported.Here,we report the anesthetic management of a patient with a large isolated fibrous tumor of the upper esophagus compressing the tracheal membrane.We also provide a literature review of the current research.CASE SUMMARY We report the case of a 49 year old male with“cough aggravation and wheezing after exercise”,who underwent esophagectomy for a large isolated fibrous tumor compressing the tracheal membrane in the upper esophagus.We advise the use of a single-lumen tube with a blocker in patients with difficult airways to reduce the incidence of airway injury and fibrinoscopy at all stages of the perioperative period to guide airway management.This case study is the first report of the anesthetic management of a large,isolated fibrous tumor compressing the tracheal membrane in the upper esophagus.CONCLUSION This rare case emphasizes the importance of perioperative management of anesthesia in patients with large isolated fibrous tumors of the upper esophagus that compress the tracheal membrane.The use of blocker reduce the incidence of airway injury and fibrinoscopy at the perioperative period to guide airway mana-gement.
文摘BACKGROUND Solitary fibrous tumor(SFT)is a remarkably uncommon mesenchymal tumor.STAT6 level and a combination of clinical,pathological,and molecular features are required to arrive at a proper diagnosis.CASE SUMMARY In this report,we present an intriguing case involving a 43-year-old woman who initially exhibited symptoms of a bleeding retroperitoneal tumor,initially resembling a gastrointestinal stromal tumor,but later confirmed as an SFT.However,a year later,what was initially believed to be a recurrence of her SFT was instead identified as a desmoid tumor.CONCLUSION Distinguishing SFT from other tumors was pivotal.Correcting misdiagnoses of tumor type initially and of recurrence later was necessary for appropriate treatment of the correct desmoid type.
文摘Background: Dermatofibroma usually occurs on the extremities or trunk as a common and benign skin tumor. The identification of typical dermatofibroma is uncomplicated, although it can be challenge due to its wide range of presentations and histological variations. Objective: This study was undertaken to evaluate the clinical and histopathological characteristics of 147 Cases of Dermatofibroma. Methods: This is a retrospective study of 147 biopsy specimens of 124 patients who were diagnosed with dermatofibroma in the Department of Dermatology and the Department of Pathology at the Seventh Affiliated Hospital of Sun Yat-sen University between January 2009 and April 2024. All case were retrieved from the saved medical records. Results: Ages of the 124 Dermatofibroma-affected individuals ranged from 11 to 61 years with a male-to-female ratio of 1:1.7. Over 80% of the case occurred between the ages of 20 and 49 years, 61.9% of the lesions were found on the extremities. The duration of the cases varied from 17 days to 30 years and half of lesions (58.2%) persisted for less than two years. Over 60% of the lesions were found on the extremities. The diameter of the tumors ranged between 0.3 cm and 5 cm, with most tumors measuring less than or equal to 2 cm (85.00%). Cutaneous masses or dermatofibroma was the most common clinical diagnosis. Most tumors (79.6%) were asymptomatic. Cutaneous masses or dermatofibroma was the most common clinical diagnosis. Prior to the surgical procedure, 57 cases were suspected to be “DF”, 55 cases were suspected to be “cutaneous masses”. Immunohistochemical staining revealed positive expression of SMA, while the negative rate of CD34 was found to be 66.67%. No diffuse CD34 positivity was observed in all tumors. Conclusion: Variations in clinical features, pathological manifestations, and immunohistochemical results of DF pose challenges for accurate diagnosis. A comprehensive understanding of its clinical and pathological characteristics is crucial for precise identification. Incorporating immunohistochemical analysis can help prevent misdiagnosis.
基金Supported by Special Project of Central Leading Local Science and Technology Development(202113030)Regional Development Project of Fujian Provincial Science and Technology Plan(2022N3017).
文摘[Objectives]To study and optimize the process conditions of enzymatic hydrolysis technology for extracting polysaccharides from Pseudostellaria heterophylla fibrous roots and its application in workshop pilot tests.[Methods]P.heterophylla fibrous roots were taken as the matrix material,and Box Behnken design was used to analyze the extraction time,composite enzyme addition amount,and liquid-solid ratio for response surface optimization experiments,and then applied to the pilot extraction of P.heterophylla fibrous roots.[Results]Response surface analysis showed that all factors had a significant impact on the experimental indicators.The optimal extraction process conditions for polysaccharides from P.heterophylla fibrous roots were extraction time of 2.7 h,compound enzyme addition of 2.5%,and liquid-solid ratio of 32.The yield of polysaccharides from P.heterophylla fibrous roots was 4.83%.The water extraction process of P.heterophylla fibrous roots extraction pilot was used as the control group for response surface optimization of the pilot experiment.The optimization results showed that the extraction time was 3 h,the amount of composite enzyme added was 2.5%,and the liquid-solid ratio was 28.The polysaccharide yield was 4.75%,an increase of 4.63%compared to the control group.[Conclusions]This paper could provide feasibility for the innovation of enzy-matic hydrolysis technology for P.heterophylla fibrous roots and its workshop pilot practice application,as well as a reference for the industrial application of its medicinal resources.
基金Supported by the National Key R&D Program of China,No.2019YFC1315800National Natural Science Foundation of China,No.82170555+3 种基金Shanghai Rising-Star Program,No.19QA1401900Major Project of Shanghai Municipal Science and Technology Committee,No.19441905200Shanghai Sailing Program of the Shanghai Municipal Science and Technology Committee,No.19YF1406400and the 74th General Support of China Postdoctoral Science Foundation,No.2023M740675.
文摘BACKGROUND Calcifying fibrous tumors(CFTs)are rare mesenchymal lesions that can occur in various sites throughout the body,including the tubular gastrointestinal(GI)tract.AIM To analyze the clinical findings of 36 patients with GI tract CFTs to provide guidance for diagnosis and treatment.METHODS This retrospective study included 36 patients diagnosed with CFTs of the GI tract.We collected demographic and clinical information and conducted regular follow-ups to assess for local recurrence.RESULTS The stomach was the most commonly involved site,accounting for 72.2%of the 36 CFTs.Endoscopic mucosal resection(n=1,2.8%),endoscopic submucosal dissection(n=14,38.9%),endoscopic full-thickness resection(n=16,44.4%),and submucosal tunneling endoscopic resection(n=5,13.9%)were used to resect calcifying fibrous tumors.Overall,34(94.4%)CFTs underwent complete endoscopic resections with a mean procedure time of 39.8±29.8 min.The average maximum diameter of the tumors was 10.6±4.3 cm.No complications,such as bleeding or perforation,occurred during an average hospital stay of 2.9±1.2 d.In addition,two patients developed new growth of CFTs near the primary tumor sites,and none of the patients developed distant metastases during the follow-up period.CONCLUSION GI tract CFTs are rare and typically benign tumors that can be effectively managed with endoscopic procedures.
基金supported by the National Natural Science Foundation of China(Nos.U2066216 and 52372068)the Na-tional Key R&D Program of China(Nos.2017YFB0310300 and 2017YFB0903800)the China Postdoctoral Science Foundation(No.2020M672248).
文摘Highly porous Si_(3)N_(4)ceramics with unidirectionally aligned pore channels are gaining significant attention across various fields due to their outstanding functional capabilities.However,achieving high strength in such unidirectional highly porous Si_(3)N_(4)ceramics remains challenging.Herein,we design and fabricate a novel β-Si_(3)N_(4)scaffold composed of directionally aligned lamellar walls with a textured microstructure by directionally freeze casting ofα-Si_(3)N_(4)suspensions with fine elongatedβ-Si_(3)N_(4)seeds addition,followed by liquid phase sintering.During the sintering,the scaffold exhibited anisotropic shrinkage,and fibrousβ-Si_(3)N_(4)grains were synthesized through epitaxial growth on the seeds preferentially oriented or the nuclei originated fromα-Si_(3)N_(4)powders,resulting in the grains aligned parallel to lamellar walls and bridged the walls.Seed additions of 7 to 15 wt%were beneficial for the optimized distribution of the two types of β-Si_(3)N_(4)grains,which contributed to the excellent resistance to bucking-induced fracture for the walls.Compared with other unidirectional porous Si_(3)N_(4)prepared by freeze-casting in the literature,the Si_(3)N_(4)scaffold exhibited out st anding compressive strength,ranging from 2.8 to 22.0 MPa,as the porosity decreased from 94.4%to 88.0%and the density increased from 175 to 365 mg/cm^(3).The lightweight and strong Si_(3)N_(4)scaffolds are promising candidates for engineering applications in harsh environments.
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
基金Project (50930005) supported by the National Natural Science Foundation of ChinaProject (U0834002) supported by the Key Programof NSFC-Guangdong Joint Funds of China+1 种基金Project (LYM09024) supported by Training Program for Excellent Young Teachers withInnovation of Guangdong University, ChinaProject (2009ZM0121) supported by the Fundamental Research Funds for the CentralUniversities of South China University of Technology,China
文摘A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process.A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere.The results show that a novel SMFM with complex surface morphology and high specific surface area（0.2 m2/g） can be obtained in this way.The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller.The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.
基金Project (20090162120080) supported by Doctoral Fund of Ministry of Education, ChinaProject (20070410989) supported by China Postdoctoral Science FoundationProject(748310000) supported by Central South University Science Foundation for Youths, China
文摘A novel precursor of nickel-cobalt alloy powders with an appropriate Ni to Co molar ratio was prepared under selectively synthetic conditions. The composition and morphology of the precursor were characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, Fourier transform infrared spectrometry （FT-IR） and energy dispersive spectrometry （EDS）. The effects of pH value, reaction temperature, metal ion concentrations and surfactant on the morphology and the dispersion of precursor were investigated. The results show that the morphology of precursor depends on ammonia content in the precursor. A fibriform precursor is a complicated ammonia-containing nickel-cobalt oxalate. The uniform shape-controlled fibrous precursor is obtained under the following optimum conditions： ammonia as complex agent as well as pH adjustor, oxalate as coprecipitator, 50-65 °C of reaction temperature, 0.5-0.8 mol/L of total concentration of Ni2＋ and Co2＋, PVP as dispersant, and pH 8.0-8.4.
基金Project(2010FJ3012)supported by the Science and Technology Plan Foundation of Hunan Province,China
文摘Fibrous particulate precursor was obtained by precipitation transformation in the ternary solution system of ammonium oxalate, nickel chloride and ammonia. The composition and morphology of precursor were characterized by XRD, SEM, IR and DTA/TGA analyses. The results show that the chemical composition and morphology of precursor precipitates at pH=8.4？8.8 are different from those of precursor precipitates at pH=6.0, and the mechanisms of the thermal decomposition of the precursors are different. The effects of various conditions in the process of thermal decomposition, including precursor morphology, atmosphere, temperature and time on the morphology and dispersion degree of obtained nickel powders were studied in detail. The final product inherits the morphology of precursor when the thermal decomposition is conducted under a weakly reducing atmosphere at temperature range of 400？440 °C for 30 min. Fibrous nickel powder can be produced with good dispersion, and its shape changes from smooth, straight and compact fiber into loose and curved fiber with rough surface.
文摘Calcifying fibrous tumor(CFT)is a rare mesenchymal lesion that has been documented throughout the gastrointestinal tract.Gastrointestinal CFTs may occur at virtually any age,with a predilection for adults and for females.They occur most commonly in the stomach and the small and large intestines.CFTs are most often found incidentally,cured by local resection,and have a low risk of recurrence.Histology shows three characteristic features:Spindle cell proliferations within a densely hyalinized stroma,scattered calcifications,and lymphoplasmacytic inflammation.CFTs are immunoreactive for CD34,vimentin and factor XIIIa,helping to distinguish them from other benign mesenchymal neoplasms.The differential diagnosis of CFTs includes sclerosing gastrointestinal stromal tumor,leiomyoma,schwannoma,solitary fibrous tumor,inflammatory myofibroblastic tumor,plexiform fibromyxoma,fibromatosis,sclerosing mesenteritis,and reactive nodular fibrous pseudotumor.The pathogenesis of CFTs remains unclear,but some have hypothesized that they may be linked to IgG4-related disease,inflammatory myofibroblastic lesions,hyaline vascular type Castleman disease,sclerosing angiomatoid nodular transformation of the spleen,or trauma.
文摘BACKGROUND Solitary fibrous tumor of the liver (SFTL) is a rare occurrence with a low number of cases reported in literature. SFTL is usually benign but, 10%-20% cases are reported to be malignant with a tendency to metastasize. The majority of malignant SFTL cases are associated with a paraneoplastic hypoglycaemia defined as Doege-Potter syndrome. Surgery is the best therapeutic treatment, however, long- life follow-up is recommended. CASE SUMMARY A 74-year-old man, was admitted to the emergency department after a syncopal episode with detection of hypoglycaemia resistant to medical treatment. The computed tomography revealed a solid mass measuring 15 cm of the left liver. An open left hepatectomy was performed with complete resection of tumor. Histopathological analyses confirmed a malignant SFTL. CONCLUSION Large series with long-term follow-up have not been published neither have clinical trials been undertaken. Consequently, the methodical long-term followup of surgically treated SFTLs is strongly recommended.
文摘BACKGROUND Solitary fibrous tumor(SFT)is a rare fibroblastic mesenchymal neoplasm that affects spindle cell soft tissues with broad-spectrum biological behavior;it is predominantly benign,and rarely metastasizes.SFT occurs mainly in the tissue structure of the serosa in the pleura and the thorax,and can be found throughout the body,though extra-thoracic localization,including the cephalic region,is uncommon.We reported the first case of intracranial malignant SFT metastasized to the chest wall.CASE SUMMARY An 81-year-old Japanese man was referred to our hospital due to progressive gait disturbance and appetite loss.His medical history included partial resection due to brain tumor,four times,and 50-Gray radiation therapy at another hospital,starting when he was 74 years old.An unenhanced head computed tomography(CT)scan revealed an 8 cm×5.1 cm×6.5 cm mixed-density mass at the left frontal lobe,accompanying a midline shift,and an unenhanced chest-abdomen CT scan revealed a 6 cm×4.1 cm×6.5 cm low-density mass in the left chest wall.A CT-guided percutaneous lung biopsy was performed,and the pathological findings were SFT corresponding to brain tumor.Finally,the correct diagnosis of his brain tumor in history of past illness revealed to be SFT,and the unremovable tumor,namely present brain lesions enlarged and metastasized to the chest wall.We established a definitive diagnosis of intracranial malignant SFT metastasized to the chest wall.We notified him and his family of the disease,and offered palliative care.He passed away on the 29 th hospital day.CONCLUSION This case suggests the need for careful,detailed examination,and careful followup when encountering patients presenting with a mass.
文摘We herein reported a 27-year-old woman with a right renal mass for two years.She underwent laparoscopic partial nephrectomy.Immunohistochemical examination of the specimen confirmed the diagnosis of solitary fibrous tumor by revealing its positive staining for cluster of differentiation(CD)34,epithelial membrane antigen(EMA),B-cell lymphoma-2(Bcl-2)and CD99 in the tumor cells.No adjuvant treatment was carried out.The patient was in good health without local recurrence or metastasis during 2 years of follow-up.Laparoscopic partial nephrectomy for renal solitary fibrous tumor is an alternative treatment to radical nephrectomy.It can provide a good outcome.However,further follow-up and more cases of renal solitary fibrous tumor treated with laparoscopic partial nephrectomy are necessary to compare the oncological outcome with radical nephrectomy.
