Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms(HABs), instigating detrimental impacts on the quality of rec...Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms(HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products(DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds(QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC(Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol–gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^(-3) log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure.The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall,the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.展开更多
The thesis had a deep research about the fiberglass filter paper＇s influence on the PM2.5 assaying. It has chosen XRF to make a quantitative analysis. Based on multiple regression theory it regard fiberglass filter p...The thesis had a deep research about the fiberglass filter paper＇s influence on the PM2.5 assaying. It has chosen XRF to make a quantitative analysis. Based on multiple regression theory it regard fiberglass filter paper＇s quality, element content and the quality of the loaded sample as independent variable, while the element＇s quality that the sample has collected as dependent variable. Furthermore, it has established four multiple quadric response surface models which concerning Ca by using of Mathematica and Matlab： Y = 0.8649-2.094x1-2.08x2 -1.375x3-10.58x1x2＋8.53x1x3＋1.549x2x3-3.443x1^2＋6.555x2^2＋6. 547x3^2; Y = 0.8649-2.094x1-2.08x2-1.375x3; Y = 0.8649 -2.094x2-2.08x2-1.375x3-3.443x1^2＋6.525x2^2＋6.547x3^2 ; Y =0.8649-2.094x1-2.08x2-1.375x3-10.58x1x2＋8.53x1x3＋1.549x2x3. After comparison it has finally found the best model. In combining with the sample it present a multiple data fitting analysis method which could adjust the fiberglass filter paper model accordingly.展开更多
The feasibility of photocatalytic degradation of organochlorine compounds using TiO 2 supported on fiberglass cloth as a photocatalyst was studied. The results showed that 2 0×10 -4 mol/dm 3 of dichloroeth...The feasibility of photocatalytic degradation of organochlorine compounds using TiO 2 supported on fiberglass cloth as a photocatalyst was studied. The results showed that 2 0×10 -4 mol/dm 3 of dichloroethylene, trichloroethylene and tetrachloroethylene can be completely photocatalytically degraded within a short time under illumination with a 375W medium pressure mercury lamp. The effects of parameters such as illumination time, initial concentration of organochlorine compounds, amount of air flow and concentration of H 2O 2 on the photocatalytic degradation were investigated. The TiO 2 supported on the fiberglass was not easily detached and after 500h illumination there was no significant loss of photocatalytic activity of TiO 2. The passible mechanisms of photocatalytic degradation were discussed.展开更多
The coated fiberglass fabric was prepared to protect personnel and equipment from sparks, heat, and molten metals during hot work projects. Ferric oxide powder 2%,mica powder6%,wollastonite powder 4%,and white carbon ...The coated fiberglass fabric was prepared to protect personnel and equipment from sparks, heat, and molten metals during hot work projects. Ferric oxide powder 2%,mica powder6%,wollastonite powder 4%,and white carbon black 8% were added in the phenyl methyl silicone to prepare the composite silicone solution. The french chalk and coupling agent can effectively solve the deposition of fillers in the coating solution. Compared with the original fiberglass fabric,heat resistance of the coated fabric under high temperature was greatly improved, and the temperature limitation in short period was higher than 900℃. Horizontal flammability tests showed that the coated fabric was non-combustible with no melting and no fragments. The temperature for long period usage of coated fabric was lower than 500 ℃. Welding drop test showed that the coating could prevent the molten metals,sparks and heat from transferring in the fabric. Test for toxic gas release showed that the toxic gases such as HCN,SO_2,HCl,and HF were not detected,only CO( 100 mg / m^3) and NO( 12 mg /m^3) were detected,and their concentrations were far lower than the limitation values CO( 4 375 mg / m^3) and NO( 134 mg /m^3). The breaking strength of coated fabric was almost twice the strength of the original fabric,and the coated surface had good water and oil repellency.展开更多
CNPC implements the call of energy conservation and emission reduction, and promotes the application of new energy conservation and emission reduction technologies and new products to achieve production and reduce pol...CNPC implements the call of energy conservation and emission reduction, and promotes the application of new energy conservation and emission reduction technologies and new products to achieve production and reduce pollution. As China’s oilfields enter the period of high water cut development, corrosion problem and scale formation ordinary steel tubing are becoming more and more serious in oilfield application, which influence and restrict the production and development and bring about energy waste. FRP tubing has been widely used in oil and gas fields because of its excellent corrosion resistance, small friction coefficient and less wear. With the gradual popularization of FRP tubing in oilfields, failure cases also show a growing trend as threaded release, leakage, fracture and so on, which affect the normal production of oilfields. In this paper, a series of key performance properties affecting service performance of high-pressure FRP tubing are tested which took from common failure cases. The key properties of FRP tubing, such as unloading, anti-collapse, short-term failure pressure at high ambient temperature and high ambient temperature axial tension, are tested in the research. The article provides a scientific basis for applicability evaluation of FRP tubing. This research has important significance for energy saving, decreasing pollution and safe operation of tubing pipes. Several suggestions are put forward on material selection and design of FRP tubing.展开更多
基金supported by Citrus Disease Research and Extension(CDRE)(grant no.2016-70016-24828/project accusation no.1008984)from the USDA National Institute of Food and Agriculture
文摘Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms(HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products(DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds(QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC(Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol–gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^(-3) log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure.The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall,the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.
文摘The thesis had a deep research about the fiberglass filter paper＇s influence on the PM2.5 assaying. It has chosen XRF to make a quantitative analysis. Based on multiple regression theory it regard fiberglass filter paper＇s quality, element content and the quality of the loaded sample as independent variable, while the element＇s quality that the sample has collected as dependent variable. Furthermore, it has established four multiple quadric response surface models which concerning Ca by using of Mathematica and Matlab： Y = 0.8649-2.094x1-2.08x2 -1.375x3-10.58x1x2＋8.53x1x3＋1.549x2x3-3.443x1^2＋6.555x2^2＋6. 547x3^2; Y = 0.8649-2.094x1-2.08x2-1.375x3; Y = 0.8649 -2.094x2-2.08x2-1.375x3-3.443x1^2＋6.525x2^2＋6.547x3^2 ; Y =0.8649-2.094x1-2.08x2-1.375x3-10.58x1x2＋8.53x1x3＋1.549x2x3. After comparison it has finally found the best model. In combining with the sample it present a multiple data fitting analysis method which could adjust the fiberglass filter paper model accordingly.
文摘The feasibility of photocatalytic degradation of organochlorine compounds using TiO 2 supported on fiberglass cloth as a photocatalyst was studied. The results showed that 2 0×10 -4 mol/dm 3 of dichloroethylene, trichloroethylene and tetrachloroethylene can be completely photocatalytically degraded within a short time under illumination with a 375W medium pressure mercury lamp. The effects of parameters such as illumination time, initial concentration of organochlorine compounds, amount of air flow and concentration of H 2O 2 on the photocatalytic degradation were investigated. The TiO 2 supported on the fiberglass was not easily detached and after 500h illumination there was no significant loss of photocatalytic activity of TiO 2. The passible mechanisms of photocatalytic degradation were discussed.
基金National Natural Science Foundation of China(No.51206122)Natural Science Foundation of Tianjin,China(No.13JCQNJC03000)
文摘The coated fiberglass fabric was prepared to protect personnel and equipment from sparks, heat, and molten metals during hot work projects. Ferric oxide powder 2%,mica powder6%,wollastonite powder 4%,and white carbon black 8% were added in the phenyl methyl silicone to prepare the composite silicone solution. The french chalk and coupling agent can effectively solve the deposition of fillers in the coating solution. Compared with the original fiberglass fabric,heat resistance of the coated fabric under high temperature was greatly improved, and the temperature limitation in short period was higher than 900℃. Horizontal flammability tests showed that the coated fabric was non-combustible with no melting and no fragments. The temperature for long period usage of coated fabric was lower than 500 ℃. Welding drop test showed that the coating could prevent the molten metals,sparks and heat from transferring in the fabric. Test for toxic gas release showed that the toxic gases such as HCN,SO_2,HCl,and HF were not detected,only CO( 100 mg / m^3) and NO( 12 mg /m^3) were detected,and their concentrations were far lower than the limitation values CO( 4 375 mg / m^3) and NO( 134 mg /m^3). The breaking strength of coated fabric was almost twice the strength of the original fabric,and the coated surface had good water and oil repellency.
文摘CNPC implements the call of energy conservation and emission reduction, and promotes the application of new energy conservation and emission reduction technologies and new products to achieve production and reduce pollution. As China’s oilfields enter the period of high water cut development, corrosion problem and scale formation ordinary steel tubing are becoming more and more serious in oilfield application, which influence and restrict the production and development and bring about energy waste. FRP tubing has been widely used in oil and gas fields because of its excellent corrosion resistance, small friction coefficient and less wear. With the gradual popularization of FRP tubing in oilfields, failure cases also show a growing trend as threaded release, leakage, fracture and so on, which affect the normal production of oilfields. In this paper, a series of key performance properties affecting service performance of high-pressure FRP tubing are tested which took from common failure cases. The key properties of FRP tubing, such as unloading, anti-collapse, short-term failure pressure at high ambient temperature and high ambient temperature axial tension, are tested in the research. The article provides a scientific basis for applicability evaluation of FRP tubing. This research has important significance for energy saving, decreasing pollution and safe operation of tubing pipes. Several suggestions are put forward on material selection and design of FRP tubing.
