In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results i...In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.展开更多
In this paper,we present a finite volume trigonometric weighted essentially non-oscillatory(TWENO)scheme to solve nonlinear degenerate parabolic equations that may exhibit non-smooth solutions.The present method is de...In this paper,we present a finite volume trigonometric weighted essentially non-oscillatory(TWENO)scheme to solve nonlinear degenerate parabolic equations that may exhibit non-smooth solutions.The present method is developed using the trigonometric scheme,which is based on zero,first,and second moments,and the direct discontinuous Galerkin(DDG)flux is used to discretize the diffusion term.Moreover,the DDG method directly applies the weak form of the parabolic equation to each computational cell,which can better capture the characteristics of the solution,especially the discontinuous solution.Meanwhile,the third-order TVD-Runge-Kutta method is applied for temporal discretization.Finally,the effectiveness and stability of the method constructed in this paper are evaluated through numerical tests.展开更多
This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens ...This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens manufactured using extrusion-based 3D printing.Through comprehensive testing,including cyclic compression at strain rates ranging from 0.12 to 120 mm/min(0%-15%strain)and creep/relaxation experiments(10%-30%strain),the lumped parameters were independently determined using both analytical and numerical solutions of the models’differential equations,followed by cross-verification in additional experiments.Numerical solutions for creep and relaxation problems were obtained using finite element analysis,with the three-parameter Mooney-Rivlin model and Prony series employed to simulate elastic and viscous stress components,respectively.Energy dissipation per cycle was quantified during cyclic compression tests.The results demonstrate that all three models adequately describe material behavior within the 0%-15%strain range across various strain rates.Comparative analysis revealed the Burgers model’s superior performance in characterizing creep and stress relaxation at low strain levels.While Zener and Burgers model parameters from uniaxial compression showed limited applicability for energy dissipation calculations,the generalized Maxwell model effectively captured viscoelastic properties across different strain rates.Notably,parameters derived from creep tests provided a more universal assessment of dissipative properties due to optimization based on characteristic curve regions.Both parameter sets described polyurethane’s elastic-hysteretic behavior with approximately 20%error,proving significantly more accurate than the linear strain-time dependence hypothesis.Finite element analysis(FEA)complemented numerical modeling by demonstrating that while the generalized Maxwell model effectively describes initial rapid stress-strain changes,FEA provides superior characterization of steady-state processes.This computational approach yields more physically representative results compared to simplified analytical solutions,despite certain limitations in transient analysis.展开更多
Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability an...Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.展开更多
Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for thes...Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.展开更多
Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres wi...Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres with artificial inherent pores are an important type of lightweight proppant,enabling their transport to distant fracture extremities and enhancing fracture conductivity.However,the focus frequently gravitates towards the low-density advantage,often overlooking the pore geometry impacts on compressive strength by traditional strength evaluation.This paper numerically bypasses such limitations by using a combined finite and discrete element method(FDEM)considering experimental results.The mesh size of the model undergoes validation,followed by the calibration of cohesive element parameters via the single particle compression test.The stimulation elucidates that proppants with a smaller pore size(40μm)manifest crack propagation evolution at a more rapid pace in comparison to their larger-pore counterparts,though the influence of pore diameter on overall strength is subtle.The inception of pores not only alters the trajectory of crack progression but also,with an increase in porosity,leads to a discernible decline in proppant compressive strength.Intriguingly,upon crossing a porosity threshold of 10%,the decrement in strength becomes more gradual.A denser congregation of pores accelerates crack propagation,undermining proppant robustness,suggesting that under analogous conditions,hollow proppants might not match the strength of their porous counterparts.This exploration elucidates the underlying mechanisms of proppant failure from a microstructural perspective,furnishing pivotal insights that may guide future refinements in the architectural design of porous proppant.展开更多
In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided int...In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided into,by the work of Amiot[Bull.Soc.Math.France,2007,135(3):435-474](see also[Adv.Math.,2008,217(6):2443-2484]and[J.Algebra,2016,446:426-449]),three classes:type A,type D and type E.展开更多
This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids)...This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids) based on classical rotations cΘand their rates. Contravariant second Piola-Kirchhoff stress and moment tensors, in conjunction with finite deformation measures derived by the authors in recent paper, are utilized in deriving the conservation and balance laws and the constitutive theories based on conjugate pairs in entropy inequality and the representation theorem. This nonlinear MPNCCT for TVES with rheology: 1) incorporates nonlinear ordered rate dissipation mechanism based on Green’s strain rates up to order n;2) also incorporates an additional ordered rate dissipation mechanism due to microconstituents, the viscosity of the medium and the rates of the symmetric part of the rotation gradient (of cΘ) tensor up to order n, referred to as micropolar dissipation or micropolar viscous dissipation mechanism;3) incorporates the primary mechanism of memory or rheology due to long chain molecules of the polymer and the viscosity of the medium by using the contravaraint second Piola-Kirchhoff stress tensor and its rates up to order m, resulting in a relaxation spectrum;4) incorporates second mechanism of memory or rheology due to nonclassical physics, interaction of microconstituents with the viscous medium and long chain molecules by considering rates of the contravariant second Piola-Kirchhoff moment tensor up to order m, resulting in relaxation of second Piola-Kirchhoff moment tensor. This results in another relaxation spectrum for the second Piola-Kirchhoff moment tensor due to microconstituents, referred to as micropolar relaxation spectrum consisting of micropolar relaxation time constants of the material. This nonlinear MPNCCT for TVES with memory is thermodynamically and mathematically consistent, and the mathematical model consisting of conservation and balance laws and the constitutive theories has closure and naturally reduces to linear MPNCCT based on infinitesimal deformation assumption. BMM is the essential balance law for all MPNCCT and is used in the present work as well. In the absence of this balance law, a valid thermodynamically and mathematically consistent nonlinear MPNCCT is not possible. The nonlinear MPNCCT based on rotations (cΘ+αΘ) and αΘ(ignoring cΘ) is not considered due to the fact that even the linear MPNCCT based on these rotations is invalid and is thermodynamically and mathematically inconsistent MPNCCT.展开更多
Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this devic...Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.展开更多
文摘In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.
基金The Natural Science Foundation of Xinjiang Uygur Autonomous Region of China“RBF-Hermite difference scheme for the time-fractional kdv-Burgers equation”(2024D01C43)。
文摘In this paper,we present a finite volume trigonometric weighted essentially non-oscillatory(TWENO)scheme to solve nonlinear degenerate parabolic equations that may exhibit non-smooth solutions.The present method is developed using the trigonometric scheme,which is based on zero,first,and second moments,and the direct discontinuous Galerkin(DDG)flux is used to discretize the diffusion term.Moreover,the DDG method directly applies the weak form of the parabolic equation to each computational cell,which can better capture the characteristics of the solution,especially the discontinuous solution.Meanwhile,the third-order TVD-Runge-Kutta method is applied for temporal discretization.Finally,the effectiveness and stability of the method constructed in this paper are evaluated through numerical tests.
文摘This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens manufactured using extrusion-based 3D printing.Through comprehensive testing,including cyclic compression at strain rates ranging from 0.12 to 120 mm/min(0%-15%strain)and creep/relaxation experiments(10%-30%strain),the lumped parameters were independently determined using both analytical and numerical solutions of the models’differential equations,followed by cross-verification in additional experiments.Numerical solutions for creep and relaxation problems were obtained using finite element analysis,with the three-parameter Mooney-Rivlin model and Prony series employed to simulate elastic and viscous stress components,respectively.Energy dissipation per cycle was quantified during cyclic compression tests.The results demonstrate that all three models adequately describe material behavior within the 0%-15%strain range across various strain rates.Comparative analysis revealed the Burgers model’s superior performance in characterizing creep and stress relaxation at low strain levels.While Zener and Burgers model parameters from uniaxial compression showed limited applicability for energy dissipation calculations,the generalized Maxwell model effectively captured viscoelastic properties across different strain rates.Notably,parameters derived from creep tests provided a more universal assessment of dissipative properties due to optimization based on characteristic curve regions.Both parameter sets described polyurethane’s elastic-hysteretic behavior with approximately 20%error,proving significantly more accurate than the linear strain-time dependence hypothesis.Finite element analysis(FEA)complemented numerical modeling by demonstrating that while the generalized Maxwell model effectively describes initial rapid stress-strain changes,FEA provides superior characterization of steady-state processes.This computational approach yields more physically representative results compared to simplified analytical solutions,despite certain limitations in transient analysis.
基金supported by the Science and Technology Research and Development Plan of the China State Railway Group Company Limited(No.Q2023J012).
文摘Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.
文摘Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.
基金the financial support provided by Tianfu Yongxing Laboratory Organized Research Project Funding(No.2023CXXM01)the ARC linkage program(No.LP200100420).
文摘Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres with artificial inherent pores are an important type of lightweight proppant,enabling their transport to distant fracture extremities and enhancing fracture conductivity.However,the focus frequently gravitates towards the low-density advantage,often overlooking the pore geometry impacts on compressive strength by traditional strength evaluation.This paper numerically bypasses such limitations by using a combined finite and discrete element method(FDEM)considering experimental results.The mesh size of the model undergoes validation,followed by the calibration of cohesive element parameters via the single particle compression test.The stimulation elucidates that proppants with a smaller pore size(40μm)manifest crack propagation evolution at a more rapid pace in comparison to their larger-pore counterparts,though the influence of pore diameter on overall strength is subtle.The inception of pores not only alters the trajectory of crack progression but also,with an increase in porosity,leads to a discernible decline in proppant compressive strength.Intriguingly,upon crossing a porosity threshold of 10%,the decrement in strength becomes more gradual.A denser congregation of pores accelerates crack propagation,undermining proppant robustness,suggesting that under analogous conditions,hollow proppants might not match the strength of their porous counterparts.This exploration elucidates the underlying mechanisms of proppant failure from a microstructural perspective,furnishing pivotal insights that may guide future refinements in the architectural design of porous proppant.
文摘In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided into,by the work of Amiot[Bull.Soc.Math.France,2007,135(3):435-474](see also[Adv.Math.,2008,217(6):2443-2484]and[J.Algebra,2016,446:426-449]),three classes:type A,type D and type E.
文摘This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids) based on classical rotations cΘand their rates. Contravariant second Piola-Kirchhoff stress and moment tensors, in conjunction with finite deformation measures derived by the authors in recent paper, are utilized in deriving the conservation and balance laws and the constitutive theories based on conjugate pairs in entropy inequality and the representation theorem. This nonlinear MPNCCT for TVES with rheology: 1) incorporates nonlinear ordered rate dissipation mechanism based on Green’s strain rates up to order n;2) also incorporates an additional ordered rate dissipation mechanism due to microconstituents, the viscosity of the medium and the rates of the symmetric part of the rotation gradient (of cΘ) tensor up to order n, referred to as micropolar dissipation or micropolar viscous dissipation mechanism;3) incorporates the primary mechanism of memory or rheology due to long chain molecules of the polymer and the viscosity of the medium by using the contravaraint second Piola-Kirchhoff stress tensor and its rates up to order m, resulting in a relaxation spectrum;4) incorporates second mechanism of memory or rheology due to nonclassical physics, interaction of microconstituents with the viscous medium and long chain molecules by considering rates of the contravariant second Piola-Kirchhoff moment tensor up to order m, resulting in relaxation of second Piola-Kirchhoff moment tensor. This results in another relaxation spectrum for the second Piola-Kirchhoff moment tensor due to microconstituents, referred to as micropolar relaxation spectrum consisting of micropolar relaxation time constants of the material. This nonlinear MPNCCT for TVES with memory is thermodynamically and mathematically consistent, and the mathematical model consisting of conservation and balance laws and the constitutive theories has closure and naturally reduces to linear MPNCCT based on infinitesimal deformation assumption. BMM is the essential balance law for all MPNCCT and is used in the present work as well. In the absence of this balance law, a valid thermodynamically and mathematically consistent nonlinear MPNCCT is not possible. The nonlinear MPNCCT based on rotations (cΘ+αΘ) and αΘ(ignoring cΘ) is not considered due to the fact that even the linear MPNCCT based on these rotations is invalid and is thermodynamically and mathematically inconsistent MPNCCT.
文摘Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.
