The TiSiN-Cu nanocomposite coating was deposited on F690 steel substrate by arc ion plating. The structure and composition, tribocorrosion behavior and anti-microbiologically influenced corrosion(MIC)properties of TiS...The TiSiN-Cu nanocomposite coating was deposited on F690 steel substrate by arc ion plating. The structure and composition, tribocorrosion behavior and anti-microbiologically influenced corrosion(MIC)properties of TiSiN-Cu coating were investigated. The results show that the TiSiN-Cu coating has unique nanocomposite structures. The results of tribocorrosion show that the potential and current change of F690 steel and TiSiN-Cu coatings tend to be opposite. The reason is that the F690 steel is non-passivated metal and the TiSiN-Cu coating has passivation phenomenon. The TiSiN-Cu coating possesses excellent tribocorrosion resistance. Cu ion released from TiSiN-Cu coating can effectively inhibit the corrosion caused by SRB.展开更多
基金supported financially by the National Key R&D Program of China (No. 2016YFB0300604)the National Natural Science Foundation of China (Nos. 51575510 and 51771221)
文摘The TiSiN-Cu nanocomposite coating was deposited on F690 steel substrate by arc ion plating. The structure and composition, tribocorrosion behavior and anti-microbiologically influenced corrosion(MIC)properties of TiSiN-Cu coating were investigated. The results show that the TiSiN-Cu coating has unique nanocomposite structures. The results of tribocorrosion show that the potential and current change of F690 steel and TiSiN-Cu coatings tend to be opposite. The reason is that the F690 steel is non-passivated metal and the TiSiN-Cu coating has passivation phenomenon. The TiSiN-Cu coating possesses excellent tribocorrosion resistance. Cu ion released from TiSiN-Cu coating can effectively inhibit the corrosion caused by SRB.
文摘本文通过板坯连铸、钢板控轧控冷(TMCP)、固溶淬火回火(QT)工业生产流程,开发低C含Cu高强韧NV-F690特厚(厚度t为80 mm)船体和海洋平台用钢板.使用SEM,EBSD和TEM分别研究了淬火(Q)态和QT态钢板的精细组织,测试了距离钢板表面t/4处(高冷却速率)和芯部t/2处(低冷却速率)的室温硬度和拉伸性能,在-60和-80℃下进行了Charpy冲击(Charpy V notch,CVN)示波实验.结果表明,淬火速率较大有利于板条组织形成和提高大角度晶界比例,t/4处的组织为板条状贝氏体(LB),板条间存在细小片状马氏体/奥氏体(M/A)组元,晶粒间大角度晶界(>15°)体积分数为67.5%;t/2处的组织为粒状贝氏体(GB)+LB,大角度晶界体积分数为63.0%;Q态下的LB具有高位错密度,但晶粒内不存在Cu析出相.经过650℃回火150 min,钢板的强韧性匹配优良,低温下呈韧性断裂,大量含Cu弥散沉淀相在基体组织内析出.t/2处的M/A组元分解为Cr-Mo碳化物,贝氏体板条宽度为0.4μm,大角度晶界分数为62.5%;t/4处的LB板条回复,板条内存在与基体取向差较大的亚晶,大角度晶界分数提高到71.7%,板条平均宽度为0.2μm.在-80℃下,NV-F690钢板t/4处的韧性高于t/2处的韧性.随着纤维断裂位移的增大,韧窝断裂区比例和韧窝尺寸逐渐增大,NV-F690钢低温Charpy冲击能量逐渐提高.
