This study employed a wet impregnation method to synthesize five types of Cu/HZSM-5 adsorbents with Si/Al ratios of 25,50,85,200,and 300,used for the removal of H_(2)S in lowtemperature,low-oxygen environments.The imp...This study employed a wet impregnation method to synthesize five types of Cu/HZSM-5 adsorbents with Si/Al ratios of 25,50,85,200,and 300,used for the removal of H_(2)S in lowtemperature,low-oxygen environments.The impact of different Si/Al ratios on the adsorption oxidative performance of Cu_(30)/HZSM-5–85 adsorbents was investigated.According to the performance test results,Cu_(30)/HZSM-5–85 exhibited the highest breakthrough capacity,reaching 231.75 mg H_(2)S/g_(sorbent).Cu/HZSM-5 sorbent maintains a strong ability to remove H_(2)S even under humid conditions and shows excellent water resistance.XRD,BET,and XPS results revealed that CuO is the primary active species,with Cu_(30)/HZSM-5–85 having the largest surface area and highest CuO content,providing more active sites for H_(2)S adsorption.H_(2)-TPR and O_(2)-TPD results confirmed that Cu_(30)/HZSM-5–85 sorbent exhibits outstanding redox properties and oxygen storage capacity,contributing to excellent oxygen transferability in the molecular sieve adsorption-oxidation process.With notable characteristics such as a large surface area,high desulfurization efficiency,and water resistance,Cu_(30)/HZSM-5–85 sorbents hold significant importance for industrial applications.展开更多
Mg/Al mixed oxides with molar ratios of 2_6 of Mg to Al used as supports for platinum catalysts were obtained by the thermal decomposition method. The effect of the composition of the mixed oxides on the physicochemic...Mg/Al mixed oxides with molar ratios of 2_6 of Mg to Al used as supports for platinum catalysts were obtained by the thermal decomposition method. The effect of the composition of the mixed oxides on the physicochemical properties was studied by TPD, nitrogen sorption, XRD and TG-DTA characterization methods. The synthesis of o-phenylphenol(OPP) from a dimer(obtained from cyclohexanone condensation) was investigated over Pt/CHT catalysts and compared with those over Pt/MgO and Pt/Al 2O 3 catalysts. These catalysts show a high activity and selectivity for OPP, with a conversion reaching 93.8% and a selectivity reaching 87.9% in some experiments. For Pt/CHTx catalysts, the calcined hydrotalcites exhibited strong base sites, which were necessary to catalyze the synthesis of OPP.展开更多
Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and but...Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and butene-1 and their mixtures on these catalysts at 300K and p=0—100kPa were measured using the intelligent gra- vimetric analyzer.The experimental results indicate that the presence of Al can significantly affect the adsorption of butene-1 than that of n-butane on ZSM-5 zeolites.Then,the double Langmuir(DL)model was applied to study the pure gas adsorption on ZSM-5 zeolites for pure n-butane and butene-1.By combining the DL model with the ideal adsorbed solution theory(IAST),the IAST-DL model was applied to model the butene-1(1)/n-butane(2)binary mixture adsorption on ZSM-5 zeolites with different Si/Al ratios.The calculated results are in good agreement with the experimental data,indicating that the IAST-DL model is effective for the present systems.Finally,the adsorp- tion over a wide range of variables was predicted at low pressure and 300K by the model proposed.It is found that the selectivity of butene-1 over n-butane increases linearly with the decrease of Si/Al ratio.A correlation between the selectivity and Si/Al ratio of the sample was proposed at 300K and p=0.08MPa.展开更多
The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of s...The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature.展开更多
The fuzzy neural networks has been used as means of precisely controlling the air-fuel ratio of a lean-burn compressed natural gas (CNG) engine. A control algorithm, without based on engine model, has been (utilized) ...The fuzzy neural networks has been used as means of precisely controlling the air-fuel ratio of a lean-burn compressed natural gas (CNG) engine. A control algorithm, without based on engine model, has been (utilized) to construct a feedforward/feedback control scheme to regulate the air-fuel ratio. Using fuzzy neural networks, a fuzzy neural hybrid controller is obtained based on PI controller. The new controller, which can adjust parameters online, has been tested in transient air-fuel ratio control of a CNG engine.展开更多
Compound casting is an efficient method for bonding dissimilar metals,in which a dramatic reaction can occur between the melt and solid.The centrifugal casting process,a type of compound casting,was applied to cast Al...Compound casting is an efficient method for bonding dissimilar metals,in which a dramatic reaction can occur between the melt and solid.The centrifugal casting process,a type of compound casting,was applied to cast Al/Mg dissimilar bimetals.Magnesium melt was poured at 700 °C,with melt-to-solid volume ratios(Vm/Vs) of 1.5 and 3,into a preheated hollow aluminum cylinder.The preheating temperatures of the solid part were 320,400,and 450 °C,and the constant rotational speed was 1,600 rpm.The cast parts were kept inside the casting machine until reaching the cooling temperature of 150 °C.The result showed that an increase in preheating temperature from 320 to 450 °C led to an enhanced reaction layer thickness.In addition,an increase in the Vm/Vs from 1.5 to 3 resulted in raising the interface thickness from 1.2 to 1.8 mm.Moreover,the interface was not continuously formed when a Vm/Vs of 3 was selected.In this case,the force of contraction overcame the resultant acting force on the interface.An interface formed at the volume ratio of 1.5 was examined using scanning electron microscopy(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS),and the results demonstrated the formation of Al_(3)Mg_(2),Al_(12)Mg_(17) and(δ+Al_(12)Mg_(17)) eutectic structures in the interface.展开更多
In recent years, more and more high Al2O3 iron ores were used in East Asia, especially in China, which increased the Al2O3 content in blast furnace (BF) slag and resulted in poor metallurgical properties of slag. Addi...In recent years, more and more high Al2O3 iron ores were used in East Asia, especially in China, which increased the Al2O3 content in blast furnace (BF) slag and resulted in poor metallurgical properties of slag. Adding MgO-bearing flux is one of the methods to improve the metallurgical properties of slag with high Al2O3. However, there is lack of theoretical basis for the proper MgO/Al2O3 ratio. Therefore, the properties of slag in SiO2-CaO-MgO-Al2O3 system were investigated based on viscosity experiments and phase diagram analyses at 1500℃, and the proper MgO/Al2O3 ratio was explored according to the Al2O3 content in slag. The experimental results show that: (1) in the case of Al2O3 content less than 14mass%, there is no limitation of the MgO/Al2O3 ratio, and the amount of MgO in slag can be determined according to the hearth tempera-ture and desulfurization;(2) in the case of Al2O3 content between 15 and 17mass%, the proper MgO/Al2O3 ratio should be 0.40-0.50;(3) in the case of Al2O3 content between 18 and 20mass%, the proper MgO/Al2O3 ratio should be 0.45-0.55. Consequently, the three-segment control theory of MgO/Al2O3 for BF slag was built, and the actual BF performances proved the validity and applicability of this theory. The research contents and results can give theoretical guidelines for stable BF operation in a wide range of Al2O3 content of 12-20mass%.展开更多
The microstructure evolution and the corrosion feature of Al–x Cu– y Li–Mg alloys( x : y = 0.44, 1.65 and 4.2) were systematically investigated under the same artificial aging conditions. The relationships between ...The microstructure evolution and the corrosion feature of Al–x Cu– y Li–Mg alloys( x : y = 0.44, 1.65 and 4.2) were systematically investigated under the same artificial aging conditions. The relationships between types of precipitates and mechanical performance, as well as electrochemical behaviors, were discussed. Our results show that different types of precipitates can be obtained in alloys with different Cu/Li mass ratios, which significantly influences the mechanical performance of the alloys and substantial corrosion behaviors. Specifically, the analogous corrosion evolution in the aging Al– x Cu– y Li–Mg alloys was first ascertained to be derived from the growth mechanism of the precipitates at the grain boundary(GB). Moreover, a small number of GB precipitates can be obtained in the aged alloy with the lowest Cu/Li mass ratio, thereby resulting in the largest intergranular corrosion resistance. A higher proportion of the GB T1 phase in the continuous precipitates induces higher corrosion sensitivity in alloy with a high Cu/Li mass ratio.展开更多
Strontium aluminate long persistence phos phors are synthesized by combustion method. By control- ling the raw material ratio （Sr/Al）, the effects of phase composition on subsequent spectroscopic properties of phosp...Strontium aluminate long persistence phos phors are synthesized by combustion method. By control- ling the raw material ratio （Sr/Al）, the effects of phase composition on subsequent spectroscopic properties of phosphors are studied. Results show that the phase com-position changes from strontium-rich phase to aluminum- rich phase with the decrease of Sr/AI： when the rate of Al/Sr changes from 3：1 to 1：1, the main crystal phase of samples is Sr3Al206, and it exhibits the characteristic fluorescence of Eu^3＋ in the lattice of Sr3Al206; when the rate of Al/Sr is between 1：2 and 2：7, phase composition is the mixture of SrAl204 and SrAl4OT, and it emits the characteristic fluorescence of Eu^2＋ in SrAl204 but not in SrAl4OT; when Al/Sr decreases to 1：4 or even 1：12, the main crystal phase of samples transform into SrAl12019, and the characteristic emission peak is about 470 nm, which corresponds to the characteristic emission of Eu2＋ in SrAl12019. At the end of the article, the influence laws of two different synthesis methods on phase composition of samples between high-temperature solid method and combustion method are compared. Compared with the high-temperature solid method, the rule of influence is similar, but the mole ratio of Al/Sr in products is always higher than the initial ratio of the raw material, and com-pounds like Sr4Al14025 are not obtained by combustion method.展开更多
Two alloys with different Ta and Al contents were applied to study the influence of Ta/Al ratio on the microstructural evolution and creep deformation under high temperature.The increase of Ta/Al ratio made theγ/γ&#...Two alloys with different Ta and Al contents were applied to study the influence of Ta/Al ratio on the microstructural evolution and creep deformation under high temperature.The increase of Ta/Al ratio made theγ/γ'lattice misfit more negative and enhanced the volume fraction ofγ'phase,which produced cubic and smallγ'phase in the initial microstructures.These initial tinyγ'phases impeded the dislocations movement and delayed the course of complete raftedγ'phase during the origination of creep deformation,which prolonged the time of the primary creep stage.Moreover,the increase of Ta/Al ratio and addition of Ru produced the denser and stable dislocation networks,the high APB energy and better solution strengthening,which hindered the climbing and sliding of dislocations,and restrained the formation of superdislocations in theγ'precipitate.The second creep stage was extended,and the minimum creep rate was reduced.Hence,the increase of whole creep life of the alloy containing high Ta/Al ratio was attributed to the prolongation of the primary and second creep stages,and the low minimum creep rate.The appearance of the topological inversion phenomenon during the tertiary creep stage was the primary cause for the sudden increase of the creep strain rate of the alloy containing low Ta/Al ratio.However,the high creep strain rate of the alloy containing high Ta/Al ratio during the tertiary creep stage was related to the occurrence and extending of the cracks near the voids.Both alloys would lose efficacy within 20 h-30 h.展开更多
Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass r...Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.展开更多
Calculation and comparative study of the chlorophyll fluorescence ratio F685/F735 in brown algae (Laminaria japonica, Underia pinnatifida and Padina crassa) excited by blue and green light showed that the fluorescence...Calculation and comparative study of the chlorophyll fluorescence ratio F685/F735 in brown algae (Laminaria japonica, Underia pinnatifida and Padina crassa) excited by blue and green light showed that the fluorescence ratios were higher when the algae were excited by blue light (440 nm), but reduced obviously under green light (540 nm) excitation. The values also reduced under dehydration but could recover during rehydration if the stress was not serious. The variation of the fluorescence ratio under dehydration was mainly because changes in fluorescence emission at 735 nm were always sharper than those at 685 nm. The ratio was sensitive to stress and has potential as a stress indicator in phycological research. Measurement of the fluorescence excitation spectra showed that the only peak at 540 hm changed apparently during dehydration. It meant that the function of the Chl a /Fucoxanthin protein complex for energy transfer was easily inhibited by water stress. However, no variation of the ratio was展开更多
The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The in...The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The increase in the CaO/Al2O3 ratio from 1 to 2 lowered the viscosity of the flux melts. The viscosity increased slightly with the CaO/Al2O3 ratio from 2 to 3, and this increase became significant with further increasing CaO/Al2O3 ratio to 4. Both break temperature and apparent activation energy were found to be increased with the increase in CaO/Al2O3 ratio from 2 to 4. There was no break temperature available in the flux with CaO/Al2O3 ratio of 1. Changing the CaO/Al2O3 ratio from 1 to 2 decreased the apparent activation energy. Equilibrium phases of the fluxes were calculated using FactSage 7.1 and the major phases were found to be varied with the CaO/Al2O3 ratio. Structures of tested mould fluxes were analysed using Fourier transform infrared spectroscopy. The results showed that the increase in the CaO/Al2O3 ratio from 1 to 2 decreased the complexity of the structure, leading to a reduced viscosity. With the increase in the CaO/Al2O3 ratio from 2 to 4, both solid phase precipitation and melt structure contributed to the variation of viscosity.展开更多
Hydration mechanism of tabular alumina carbon composites reinforced by Al4C3 in situ reaction with Mg and Al was researched in water steam using super automatic thermostatic water bath from 25 ℃ to 85 ℃. It is shown...Hydration mechanism of tabular alumina carbon composites reinforced by Al4C3 in situ reaction with Mg and Al was researched in water steam using super automatic thermostatic water bath from 25 ℃ to 85 ℃. It is shown that hydration mechanism of the composites is chemical reaction control at 44.3 ℃-84 ℃ in H2O（g）. The hydration was controlled by diffusion from 24.7 ℃ to 33 ℃. The ratio of added Mg/Al influences the HMOR of the composites.The mechanism of HMOR of the composites with different ratios of Mg/Al can be discovered by means of SEM analysis. The active Mg/Al powder and flake graphite inside give the composites outstanding hot strength resulting from the interlocking structure of Al4C3 crystals at high temperature. Besides, the matrix changes into the Al4C3 with high refractoriness. The method of preventing the hydration of tabular alumina carbon composites reinforced by Al4C3 in situ reaction was immersed in the wax at suitable temperature or storing them below 33 ℃ in a dry place or storing them with paraffin-coating.展开更多
A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experime...A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated.The results indicate that the average size ofα-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%.In addition,the eutectic Mg2Si phase in the Mg−10%Al−1%Zn−1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process.With the increasing of compression ratio,the morphology and average size of Mg2Si phases do not change obviously.The morphology modification mechanism of Mg2Si phase in Mg−10%Al−1%Zn−1%Si alloy by SIMA process was also studied.展开更多
In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrot...In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrothermal crystallization. The Si/Al ratio of SAPO-34 film was used as the only variable to study this material. The composite zeolite material with 0.6Si/Al ratio of SAPO-34 has the largest mesoporous specific surface area and the most suitable acid distribution. The catalytic performance for the MTA process showed that 0.6-SAPO-34/ZSM-5/quartz film has as high as 50.3% benzene-toluenexylene selectivity and 670 min lifetime. The MTA reaction is carried out through the path we designed to effectively avoid the hydrocarbon pool circulation of ZSM-5 zeolite, so as to improve the aromatics selectivity and inhibit the occurrence of deep side reactions to a great extent. The coke deposition behavior was monitored by thermogravimetric analysis and gas chromatograph/mass spectrometer, it is found that with the increase of Si/Al ratio, the active intermediates changed from low-substituted methylbenzene to high-substituted methylbenzene, which led to the rapid deactivation of the catalyst. This work provides a possibility to employ the synergy effect of composite zeolite film synthesizing anti-carbon deposition catalyst in MTA reaction.展开更多
In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, whi...In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52270106 and 22266021)Yunnan Major Scientific and Technological Projects(No.202202AG050005)Yunnan Fundamental Research Projects(No.202201AT070116).
文摘This study employed a wet impregnation method to synthesize five types of Cu/HZSM-5 adsorbents with Si/Al ratios of 25,50,85,200,and 300,used for the removal of H_(2)S in lowtemperature,low-oxygen environments.The impact of different Si/Al ratios on the adsorption oxidative performance of Cu_(30)/HZSM-5–85 adsorbents was investigated.According to the performance test results,Cu_(30)/HZSM-5–85 exhibited the highest breakthrough capacity,reaching 231.75 mg H_(2)S/g_(sorbent).Cu/HZSM-5 sorbent maintains a strong ability to remove H_(2)S even under humid conditions and shows excellent water resistance.XRD,BET,and XPS results revealed that CuO is the primary active species,with Cu_(30)/HZSM-5–85 having the largest surface area and highest CuO content,providing more active sites for H_(2)S adsorption.H_(2)-TPR and O_(2)-TPD results confirmed that Cu_(30)/HZSM-5–85 sorbent exhibits outstanding redox properties and oxygen storage capacity,contributing to excellent oxygen transferability in the molecular sieve adsorption-oxidation process.With notable characteristics such as a large surface area,high desulfurization efficiency,and water resistance,Cu_(30)/HZSM-5–85 sorbents hold significant importance for industrial applications.
文摘Mg/Al mixed oxides with molar ratios of 2_6 of Mg to Al used as supports for platinum catalysts were obtained by the thermal decomposition method. The effect of the composition of the mixed oxides on the physicochemical properties was studied by TPD, nitrogen sorption, XRD and TG-DTA characterization methods. The synthesis of o-phenylphenol(OPP) from a dimer(obtained from cyclohexanone condensation) was investigated over Pt/CHT catalysts and compared with those over Pt/MgO and Pt/Al 2O 3 catalysts. These catalysts show a high activity and selectivity for OPP, with a conversion reaching 93.8% and a selectivity reaching 87.9% in some experiments. For Pt/CHTx catalysts, the calcined hydrotalcites exhibited strong base sites, which were necessary to catalyze the synthesis of OPP.
基金Supported by the National Natural Science Foundation of China （Nos.20236010,20476004） and China Petroleum ＆ Chemical Corporation （No.X504023）.
文摘Four ZSM-5 zeolite catalysts with different Si/Al ratios for the catalytic cracking of C4 fractions to produce ethylene and propylene were prepared in this study.First,the adsorption isotherms of pure n-butane and butene-1 and their mixtures on these catalysts at 300K and p=0—100kPa were measured using the intelligent gra- vimetric analyzer.The experimental results indicate that the presence of Al can significantly affect the adsorption of butene-1 than that of n-butane on ZSM-5 zeolites.Then,the double Langmuir(DL)model was applied to study the pure gas adsorption on ZSM-5 zeolites for pure n-butane and butene-1.By combining the DL model with the ideal adsorbed solution theory(IAST),the IAST-DL model was applied to model the butene-1(1)/n-butane(2)binary mixture adsorption on ZSM-5 zeolites with different Si/Al ratios.The calculated results are in good agreement with the experimental data,indicating that the IAST-DL model is effective for the present systems.Finally,the adsorp- tion over a wide range of variables was predicted at low pressure and 300K by the model proposed.It is found that the selectivity of butene-1 over n-butane increases linearly with the decrease of Si/Al ratio.A correlation between the selectivity and Si/Al ratio of the sample was proposed at 300K and p=0.08MPa.
基金Projects(51574067,51904063)supported by the National Natural Science Foundation of ChinaProjects(N172503016,N172502005,N172506011)supported by Fundamental Research Funds for the Central Universities,ChinaProject(2018M640259)supported by China Postdoctoral Science Foundation
文摘The effects of MgO/Al2 O3 ratio on the viscous behaviors of MgO-Al2 O3-TiO2-CaO-SiO2 systems were investigated by the rotating cylinder method.Raman spectroscopy was used to analyze the structural characteristics of slag and Factsage 7.0 was adopted to demonstrate the liquidus temperature of slag.The results show that the viscosity and activation energy for viscous flow decrease when the MgO/Al2O3 ratio increases from 0.82 to 1.36.The break point temperature and liquidus temperature of slag initially decrease and subsequently increase.The complex viscous structures are gradually depolymerized to simple structural units.In conclusion,with the increase of MgO/Al2O3 ratio,the degree of polymerization of slag decreases,which improves the fluidity of slag.The variations of liquidus temperature of slag lead to the same changes of break point temperature.
文摘The fuzzy neural networks has been used as means of precisely controlling the air-fuel ratio of a lean-burn compressed natural gas (CNG) engine. A control algorithm, without based on engine model, has been (utilized) to construct a feedforward/feedback control scheme to regulate the air-fuel ratio. Using fuzzy neural networks, a fuzzy neural hybrid controller is obtained based on PI controller. The new controller, which can adjust parameters online, has been tested in transient air-fuel ratio control of a CNG engine.
文摘Compound casting is an efficient method for bonding dissimilar metals,in which a dramatic reaction can occur between the melt and solid.The centrifugal casting process,a type of compound casting,was applied to cast Al/Mg dissimilar bimetals.Magnesium melt was poured at 700 °C,with melt-to-solid volume ratios(Vm/Vs) of 1.5 and 3,into a preheated hollow aluminum cylinder.The preheating temperatures of the solid part were 320,400,and 450 °C,and the constant rotational speed was 1,600 rpm.The cast parts were kept inside the casting machine until reaching the cooling temperature of 150 °C.The result showed that an increase in preheating temperature from 320 to 450 °C led to an enhanced reaction layer thickness.In addition,an increase in the Vm/Vs from 1.5 to 3 resulted in raising the interface thickness from 1.2 to 1.8 mm.Moreover,the interface was not continuously formed when a Vm/Vs of 3 was selected.In this case,the force of contraction overcame the resultant acting force on the interface.An interface formed at the volume ratio of 1.5 was examined using scanning electron microscopy(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS),and the results demonstrated the formation of Al_(3)Mg_(2),Al_(12)Mg_(17) and(δ+Al_(12)Mg_(17)) eutectic structures in the interface.
基金The financial supports of National Natural Science Foundation of China(NSFC 51874080,NSFC 51774071,and NSFC 51974073)Natural Science Foundation of Liaoning(2019-MS-132)are much appreciated.
文摘In recent years, more and more high Al2O3 iron ores were used in East Asia, especially in China, which increased the Al2O3 content in blast furnace (BF) slag and resulted in poor metallurgical properties of slag. Adding MgO-bearing flux is one of the methods to improve the metallurgical properties of slag with high Al2O3. However, there is lack of theoretical basis for the proper MgO/Al2O3 ratio. Therefore, the properties of slag in SiO2-CaO-MgO-Al2O3 system were investigated based on viscosity experiments and phase diagram analyses at 1500℃, and the proper MgO/Al2O3 ratio was explored according to the Al2O3 content in slag. The experimental results show that: (1) in the case of Al2O3 content less than 14mass%, there is no limitation of the MgO/Al2O3 ratio, and the amount of MgO in slag can be determined according to the hearth tempera-ture and desulfurization;(2) in the case of Al2O3 content between 15 and 17mass%, the proper MgO/Al2O3 ratio should be 0.40-0.50;(3) in the case of Al2O3 content between 18 and 20mass%, the proper MgO/Al2O3 ratio should be 0.45-0.55. Consequently, the three-segment control theory of MgO/Al2O3 for BF slag was built, and the actual BF performances proved the validity and applicability of this theory. The research contents and results can give theoretical guidelines for stable BF operation in a wide range of Al2O3 content of 12-20mass%.
基金Postdoctoral Research Station of Mechanical Engineering of school of Mechanical and Electrical Engineering of Central South Universityfinancially supported by the National Foundation of China(No.TDZX-17-005-1)。
文摘The microstructure evolution and the corrosion feature of Al–x Cu– y Li–Mg alloys( x : y = 0.44, 1.65 and 4.2) were systematically investigated under the same artificial aging conditions. The relationships between types of precipitates and mechanical performance, as well as electrochemical behaviors, were discussed. Our results show that different types of precipitates can be obtained in alloys with different Cu/Li mass ratios, which significantly influences the mechanical performance of the alloys and substantial corrosion behaviors. Specifically, the analogous corrosion evolution in the aging Al– x Cu– y Li–Mg alloys was first ascertained to be derived from the growth mechanism of the precipitates at the grain boundary(GB). Moreover, a small number of GB precipitates can be obtained in the aged alloy with the lowest Cu/Li mass ratio, thereby resulting in the largest intergranular corrosion resistance. A higher proportion of the GB T1 phase in the continuous precipitates induces higher corrosion sensitivity in alloy with a high Cu/Li mass ratio.
基金financially supported by the National Natural Science Foundation of China(No.NSFC50962001)the Scientific Research Foundation of Beifang Ethnic University for Nationalities(No.2010Y042)
文摘Strontium aluminate long persistence phos phors are synthesized by combustion method. By control- ling the raw material ratio （Sr/Al）, the effects of phase composition on subsequent spectroscopic properties of phosphors are studied. Results show that the phase com-position changes from strontium-rich phase to aluminum- rich phase with the decrease of Sr/AI： when the rate of Al/Sr changes from 3：1 to 1：1, the main crystal phase of samples is Sr3Al206, and it exhibits the characteristic fluorescence of Eu^3＋ in the lattice of Sr3Al206; when the rate of Al/Sr is between 1：2 and 2：7, phase composition is the mixture of SrAl204 and SrAl4OT, and it emits the characteristic fluorescence of Eu^2＋ in SrAl204 but not in SrAl4OT; when Al/Sr decreases to 1：4 or even 1：12, the main crystal phase of samples transform into SrAl12019, and the characteristic emission peak is about 470 nm, which corresponds to the characteristic emission of Eu2＋ in SrAl12019. At the end of the article, the influence laws of two different synthesis methods on phase composition of samples between high-temperature solid method and combustion method are compared. Compared with the high-temperature solid method, the rule of influence is similar, but the mole ratio of Al/Sr in products is always higher than the initial ratio of the raw material, and com-pounds like Sr4Al14025 are not obtained by combustion method.
基金financially supported by the National Science and Technology Major Project under(No.2017-Ⅵ-0002-0072)the National Key R&D Program of China(No.2017YFA0700704)+1 种基金the National Natural Science Foundation of China(Nos.51671188,51601192 and 51701210)the Youth Innovation Promotion Association,Chinese Academy of Sciences and State Key Lab of Advanced Metals and Materials Open Fund(No.2018-Z07)。
文摘Two alloys with different Ta and Al contents were applied to study the influence of Ta/Al ratio on the microstructural evolution and creep deformation under high temperature.The increase of Ta/Al ratio made theγ/γ'lattice misfit more negative and enhanced the volume fraction ofγ'phase,which produced cubic and smallγ'phase in the initial microstructures.These initial tinyγ'phases impeded the dislocations movement and delayed the course of complete raftedγ'phase during the origination of creep deformation,which prolonged the time of the primary creep stage.Moreover,the increase of Ta/Al ratio and addition of Ru produced the denser and stable dislocation networks,the high APB energy and better solution strengthening,which hindered the climbing and sliding of dislocations,and restrained the formation of superdislocations in theγ'precipitate.The second creep stage was extended,and the minimum creep rate was reduced.Hence,the increase of whole creep life of the alloy containing high Ta/Al ratio was attributed to the prolongation of the primary and second creep stages,and the low minimum creep rate.The appearance of the topological inversion phenomenon during the tertiary creep stage was the primary cause for the sudden increase of the creep strain rate of the alloy containing low Ta/Al ratio.However,the high creep strain rate of the alloy containing high Ta/Al ratio during the tertiary creep stage was related to the occurrence and extending of the cracks near the voids.Both alloys would lose efficacy within 20 h-30 h.
基金Project(51204115)supported by the National Natural Science Foundation of ChinaProject(BK20130308)supported by the Basic Research Program of Jiangsu Province,ChinaProject(2014M561710)supported by China Postdoctoral Science Foundation
文摘Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.
基金This work is supported by a fellowship of the EMBL(The Experimental Marine Biological Laboratory,Institute of Oceanology,Academia Sinica)
文摘Calculation and comparative study of the chlorophyll fluorescence ratio F685/F735 in brown algae (Laminaria japonica, Underia pinnatifida and Padina crassa) excited by blue and green light showed that the fluorescence ratios were higher when the algae were excited by blue light (440 nm), but reduced obviously under green light (540 nm) excitation. The values also reduced under dehydration but could recover during rehydration if the stress was not serious. The variation of the fluorescence ratio under dehydration was mainly because changes in fluorescence emission at 735 nm were always sharper than those at 685 nm. The ratio was sensitive to stress and has potential as a stress indicator in phycological research. Measurement of the fluorescence excitation spectra showed that the only peak at 540 hm changed apparently during dehydration. It meant that the function of the Chl a /Fucoxanthin protein complex for energy transfer was easily inhibited by water stress. However, no variation of the ratio was
文摘The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The increase in the CaO/Al2O3 ratio from 1 to 2 lowered the viscosity of the flux melts. The viscosity increased slightly with the CaO/Al2O3 ratio from 2 to 3, and this increase became significant with further increasing CaO/Al2O3 ratio to 4. Both break temperature and apparent activation energy were found to be increased with the increase in CaO/Al2O3 ratio from 2 to 4. There was no break temperature available in the flux with CaO/Al2O3 ratio of 1. Changing the CaO/Al2O3 ratio from 1 to 2 decreased the apparent activation energy. Equilibrium phases of the fluxes were calculated using FactSage 7.1 and the major phases were found to be varied with the CaO/Al2O3 ratio. Structures of tested mould fluxes were analysed using Fourier transform infrared spectroscopy. The results showed that the increase in the CaO/Al2O3 ratio from 1 to 2 decreased the complexity of the structure, leading to a reduced viscosity. With the increase in the CaO/Al2O3 ratio from 2 to 4, both solid phase precipitation and melt structure contributed to the variation of viscosity.
基金Funded by the National Torch Plan of China(No.2005EB031110)the Key Scientific and Technical Innovation Project of Xi’an University of Architecture and Technology(No.zx 0402)
文摘Hydration mechanism of tabular alumina carbon composites reinforced by Al4C3 in situ reaction with Mg and Al was researched in water steam using super automatic thermostatic water bath from 25 ℃ to 85 ℃. It is shown that hydration mechanism of the composites is chemical reaction control at 44.3 ℃-84 ℃ in H2O（g）. The hydration was controlled by diffusion from 24.7 ℃ to 33 ℃. The ratio of added Mg/Al influences the HMOR of the composites.The mechanism of HMOR of the composites with different ratios of Mg/Al can be discovered by means of SEM analysis. The active Mg/Al powder and flake graphite inside give the composites outstanding hot strength resulting from the interlocking structure of Al4C3 crystals at high temperature. Besides, the matrix changes into the Al4C3 with high refractoriness. The method of preventing the hydration of tabular alumina carbon composites reinforced by Al4C3 in situ reaction was immersed in the wax at suitable temperature or storing them below 33 ℃ in a dry place or storing them with paraffin-coating.
基金The authors are grateful for the financial supports from the National Natural Science Foundation of China(Nos.41807235,50674038).
文摘A new Mg−10%Al−1%Zn−1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation(SIMA)process.The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated.The results indicate that the average size ofα-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%.In addition,the eutectic Mg2Si phase in the Mg−10%Al−1%Zn−1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process.With the increasing of compression ratio,the morphology and average size of Mg2Si phases do not change obviously.The morphology modification mechanism of Mg2Si phase in Mg−10%Al−1%Zn−1%Si alloy by SIMA process was also studied.
基金supported by the National Natural Science Foundation of China (51974312, 51974308)the National Key Research & Development Program of China (2019YFE0100100)。
文摘In order to further improve the catalytic performance of zeolite catalyst for methanol to aromatics(MTA)technology, the double-tier SAPO-34/ZSM-5/quartz composite zeolite films were successfully synthesized via hydrothermal crystallization. The Si/Al ratio of SAPO-34 film was used as the only variable to study this material. The composite zeolite material with 0.6Si/Al ratio of SAPO-34 has the largest mesoporous specific surface area and the most suitable acid distribution. The catalytic performance for the MTA process showed that 0.6-SAPO-34/ZSM-5/quartz film has as high as 50.3% benzene-toluenexylene selectivity and 670 min lifetime. The MTA reaction is carried out through the path we designed to effectively avoid the hydrocarbon pool circulation of ZSM-5 zeolite, so as to improve the aromatics selectivity and inhibit the occurrence of deep side reactions to a great extent. The coke deposition behavior was monitored by thermogravimetric analysis and gas chromatograph/mass spectrometer, it is found that with the increase of Si/Al ratio, the active intermediates changed from low-substituted methylbenzene to high-substituted methylbenzene, which led to the rapid deactivation of the catalyst. This work provides a possibility to employ the synergy effect of composite zeolite film synthesizing anti-carbon deposition catalyst in MTA reaction.
基金Supported by the Henan Outstanding Youth Science Fund (0612002400)
文摘In order to improve the activity and eliminate some impurities, pretreatment was used before hydrothermal synthesis. The fly ash was mixed with an aqueous NaOH solution, the alkali melted fly ash was also adopted, which is hydrothermally treated at about 104 ℃, and the liquid/solid ratio was controlled at 6：1. In order to control Si/Al molar ratio, SiO2 or Al2O3 powers were added to the fly ash. The results of XRD and SEM show that the alkali melted can activate fly ash and eliminate its quartz and mullite, along with the improvement of Si/Al molar ratio and alkalinity. In addition, zeolite Na-A changes into sodalite gradually, and nepheline is the synthesized intermediate product. Those results were discussed on the basis of a formation mechanism of zeolite from fly ash.
