A wavelength-tunable mode-locked quantum dot laser using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. A dispersion prism, which has lower optical loss an...A wavelength-tunable mode-locked quantum dot laser using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. A dispersion prism, which has lower optical loss and less spectral narrowing than a blazed grating, is used for wavelength selection and tuning. A wavelength tuning range of 45.5 nm （from 1137.3 nm to 1182.8 nm） under 140-mA injection current in the passive mode-locked regime is achieved. The maximum average power of 19 mW is obtained at the 1170.3-nm wavelength, corresponding to the single pulse energy of 36.5 pJ.展开更多
A mode-locked external-cavity laser emitting at 1.17-μm wavelength using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. By changing the external-cavity le...A mode-locked external-cavity laser emitting at 1.17-μm wavelength using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. By changing the external-cavity length, repetition rates of 854, 912, and 969 MHz are achieved respectively. The narrowest -3-dB radio-frequency linewidth obtained is 38 kHz, indicating that the laser is under stable mode-locking operation.展开更多
Interference filter-stabilized external cavity diode lasers （ECDLs） have properties of simple configurations, high sta- bilities, and narrow linewidths. However, the interference filter used in common ECDL designs r...Interference filter-stabilized external cavity diode lasers （ECDLs） have properties of simple configurations, high sta- bilities, and narrow linewidths. However, the interference filter used in common ECDL designs requires an ultra-narrow bandwidth （about 0.3 nm） to achieve mode selection, that is considerably expensive and not yet available for a wide range of wavelengths. In this paper, a robust ECDL using an available broad bandwidth （about 4 nm） interference filter as the wavelength discriminator is constructed and tested. The ECDL demonstrated a narrow Lorentzian fitted linewidth of 95 kHz and a spectral purity of 2.9 MHz. The long-term frequency stability of the ECDL reaches 5.59 x 10 12.展开更多
Intensity modulation induced by the asymmetric external cavity in single-mode microchip Nd：YAG lasers is prosented. Two kinds of experimental results are discussed based on multiple feedback effects. In one case, the...Intensity modulation induced by the asymmetric external cavity in single-mode microchip Nd：YAG lasers is prosented. Two kinds of experimental results are discussed based on multiple feedback effects. In one case, the intensity modulation curve is a normal sine wave, whose fringe frequency is four times higher than that of a conventional optical feedback system, caused by multiple feedback effects. In the other case, the intensity modulation curve is the overlapping of the above quadruple-frequency signal and conventional optical feedback signal, which is determined by the additional phase difference induced by the asymmetric external cavity. The theoretical analyses are in good agreement with the experimental results. The quadruple-frequency modulation of the laser output intensity can greatly increase the resolution of displacement measurement of an optical feedback system.展开更多
In order to choose appropriate frequency stabilization method in the atom gravimeter system under construction,Doppler-free dichroic atomic vapor laser lock(Doppler-free DAVLL)and saturated absorption spectroscopy(SAS...In order to choose appropriate frequency stabilization method in the atom gravimeter system under construction,Doppler-free dichroic atomic vapor laser lock(Doppler-free DAVLL)and saturated absorption spectroscopy(SAS)method were implemented on Rubidium atomic vapor.Basic principle and experimental details of both frequency stabilization methods were introduced.With restructuring of optical path and applying of self-made low noise photoelectric detector as well as digital lock module,excellent error signal was obtained.For each method,two sets of locking system were built and kept locked during3000 s′data acquisition.A frequency fluctuation of 629 k Hz when the laser is free running and of16.2 k Hz 31.4 k Hz after locked by SAS and Doppler-free DAVLL were calculated respectively,corresponding to a frequency stability of 1.64×10^(-9)in the condition of free running and 4.21×10^(-11)&8.18×10^(-11)after locked for averaging time of 10 s.The strength and weakness of both methods were elaborated with the demand of system miniaturization.After compared with SAS,Doppler-free DAVLL isconsidered to be a promising choice for miniaturization and modularization in atom interferometry gravimeter.展开更多
Narrow linewidth light source is a prerequisite for high-performance coherent optical communication and sensing.Waveguide-based external cavity narrow linewidth semiconductor lasers(WEC-NLSLs)have become a competitive...Narrow linewidth light source is a prerequisite for high-performance coherent optical communication and sensing.Waveguide-based external cavity narrow linewidth semiconductor lasers(WEC-NLSLs)have become a competitive and attractive candidate for many coherent applications due to their small size,volume,low energy consumption,low cost and the ability to integrate with other optical components.In this paper,we present an overview of WEC-NLSLs from their required technologies to the state-of-the-art progress.Moreover,we highlight the common problems occurring to current WEC-NLSLs and show the possible approaches to resolving the issues.Finally,we present the possible development directions for the next phase and hope this review will be beneficial to the advancements of WEC-NLSLs.展开更多
A broadband external cavity tunable laser is realized by using a broad-emitting spectral InAs/GaAs quantum dot （QD） gain device. A tuning range of 69 nm with a central wavelength of 1056 nm, is achieved at a bias of...A broadband external cavity tunable laser is realized by using a broad-emitting spectral InAs/GaAs quantum dot （QD） gain device. A tuning range of 69 nm with a central wavelength of 1056 nm, is achieved at a bias of 1.25 kA/cm^2only by utilizing the light emission from the ground state of QDs. This large tunable range only covers the QD ground-state emission and is related to the inhomogeneous size distribution of QDs. No excited state contributes to the tuning bandwidth. The application of the QD gain device to the external cavity tunable laser shows its immense potential in broadening the tuning bandwidth. By the external cavity feedback, the threshold current densitycan be reduced remarkably compared with the free-running QD gain device.展开更多
We present a compact and practical scheme of building a ~780 nm external cavity diode laser(ECDL) whose wavelength is mainly determined by an interference filter. The Lorentzian linewidth measured by the heterodyne be...We present a compact and practical scheme of building a ~780 nm external cavity diode laser(ECDL) whose wavelength is mainly determined by an interference filter. The Lorentzian linewidth measured by the heterodyne beating between two identical lasers is 60 k Hz, and the geometry size of the laser is only 71.5 mm×65 mm×40 mm. The linear cavity design is less sensitive to misalignment induced by mechanical and thermal disturbances, and in comparison to a common grating-based design, the sensitivity to vibration is substantially reduced. Due to its excellent performance, the laser design has already been applied to cold atom trapping experiments. This interference filter ECDL method can also be extended to other wavelengths and widen the application range of diode laser.展开更多
A broadband tunable grating-coupled external cavity laser is realized by employing a self-assembled InAs/GaAs quantum-dot （QD） superluminescent diode （SLD） as the gain device. The SLD device is processed with a be...A broadband tunable grating-coupled external cavity laser is realized by employing a self-assembled InAs/GaAs quantum-dot （QD） superluminescent diode （SLD） as the gain device. The SLD device is processed with a bent-waveguide structure and facet antireflection （AR） coating. Tuning bandwidths of 106 nm and 117 nm are achieved under a-A and 3.5-A injection currents, respectively. The large tuning range originates essentially from the broad gain spectrum of self-assembled QDs. The bent waveguide structure combined with the facet AR coating plays a role in suppressing the inner-cavity lasing under a large injection current.展开更多
The estimation of the external quality factor is important for designing coupling devices for the cavities.A new representation of the external quality factor calculations for single-cell cavity coupled to a coaxial t...The estimation of the external quality factor is important for designing coupling devices for the cavities.A new representation of the external quality factor calculations for single-cell cavity coupled to a coaxial transmission line is derived based on analytic analysis and numeric analysis with the help of 3D electromagnetic code,and verified with experimental measurements at room temperature.In logarithmic scale the results for the external quality factor were quasi-linear over the limited range,and the simulated and measured data could be used and extrapolated to the superconducting case.For the unpolished 1.5 GHz 3rd harmonic superconducting cavity,the discrepancy between the evaluation value and measurement result is less than 25% within an acceptable deviation.展开更多
External-cavity birefringence feedback effects of the microchip Nd：YAG laser are presented. When a birefringence element is placed in the external feedback cavity of the laser, two orthogonally polarized laser beams ...External-cavity birefringence feedback effects of the microchip Nd：YAG laser are presented. When a birefringence element is placed in the external feedback cavity of the laser, two orthogonally polarized laser beams with a phase difference are output. The phase difference is twice as large as the phase retardation in the external cavity along the two orthogonal directions. The variable extra-cavity birefringence, caused by rotation of the external-cavity birefringenee element, results in tunable phase difference between the two orthogonally polarized beams. This means that the roll angle information has been translated to phase difference of two output laser beams. A theoretical analysis based on the Fabry-Perot cavity equivalent model and refractive index ellipsoid is presented, which is in good agreement with the experimental results. This phenomenon has potential applications for roll angle measurement.展开更多
A wide wavelength tuning range swept external-cavity laser using an In As/Ga As quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Li...A wide wavelength tuning range swept external-cavity laser using an In As/Ga As quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Littrow telescope-less configuration. The swept laser generates greater than 54-m W peak output power and up to 33-k Hz sweep rate with a sweep range of 150 nm centered at 1155 nm. The effects of injection current and sweep rate on the sweep performance of the swept laser are studied.展开更多
The optical performance of a grating-coupled external Continuous tuning from 1391 nm to 1468 nm is realized at cavity laser based on InAs/InP quantum dots is investigated. an injection current of 1900 mA. With the inj...The optical performance of a grating-coupled external Continuous tuning from 1391 nm to 1468 nm is realized at cavity laser based on InAs/InP quantum dots is investigated. an injection current of 1900 mA. With the injection current increasing to 2300 mA, the tuning is blue shifted to some extent to the range from 1383 nm to 1461 nm. By combining the effect of the injection current with the grating tuning, the total tuning bandwidth of the external cavity quantum-dot laser can reach up to 85 nm. The dependence of the threshold current on the tuning wavelength is also presented.展开更多
A 1550-nm linearly tunable continuous wave （CW） single-mode external cavity diode laser （ECDL） based on a singlecavity all-dielectric thin-film Fabry-Pérot filter （s-AFPF） is proposed and realized in this p...A 1550-nm linearly tunable continuous wave （CW） single-mode external cavity diode laser （ECDL） based on a singlecavity all-dielectric thin-film Fabry-Pérot filter （s-AFPF） is proposed and realized in this paper. Its internal optical components as well as their operation mechanisms are introduced first, and then its longitudinal mode output characteristic is theoretically analyzed. Afterwards, we set up the experimental platform for the output characteristic measurement of this tunable ECDL; under different experimental conditions, we execute accurate and real-time measurements for the output central wavelength, output optical power, output longitudinal mode distribution, and the line-width of the tunable ECDL in its tuning process. By summing up the optimal experimental condition from the measured data, we obtain the optimal tunable ECDL relevant parameters： the tunable ECDL has a linear mode-hop-free wavelength tuning region of 1547.203 nm-1552.426 nm, a stable output optical power in the range of 40 μW-50 μW, and a stable output longitudinal mode distribution of a single longitudinal mode with a line-width in the range of 100 MHz-150 MHz. This tunable ECDL can be used in environmental gas monitoring, atomic and molecular laser spectroscopy research, precise measurements, and so on.展开更多
This paper presents the diffraction effects on the performance of a dual external cavity tunable laser source, whose external cavities are constructed by micro electro mechanical systems (MEMS). One of the main proble...This paper presents the diffraction effects on the performance of a dual external cavity tunable laser source, whose external cavities are constructed by micro electro mechanical systems (MEMS). One of the main problems in these structures is the optical diffraction as the emitting surface of the laser diode is usually quite limited in the transverse directions. The emitted beam diffracts rapidly in the air and only a small amount of light is coupled back to the source that usually limits the tuning range of the source. Device characteristics such as tuning range, wavelength shift and sensitivity are evaluated. New expression is used and multiple reflections inside external cavities are considered. The simulation results have shown that single external cavity has limited tuning range. It is shown that multiple reflections have significant effect in our model. To get a better engineering for the dual ECTL dimensions, diffraction effects must be taken into account.展开更多
A diode laser array(DLA)positioned in an external cavity can receive the radiations emitted from its neighboring elements (C 1) and that of itself (S) after being reflected at the DLA facet as well as from the externa...A diode laser array(DLA)positioned in an external cavity can receive the radiations emitted from its neighboring elements (C 1) and that of itself (S) after being reflected at the DLA facet as well as from the external mirror (C 0). Considering the fact that｜C 0/S｜ should be larger than unity if the external cavity is effective,and｜C 1/S｜ should be larger than unity if the phase locking may be established in the external cavity.The requirements on the reflection at the facet of the diode laser array have been specified in terms of the cavity length and reflection coefficient of the external mirror.展开更多
An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow ...An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow configuration. Taking advantage of the single-lobed fundamental supermode far-field pattern, the tuning capa- bility of 30.6cm-1 is achieved with a fixed injected current of 3.5 A at room temperature. Single-mode emission can be observed in the entire process. The maximum single-mode output power of the external cavity setup is as high as 25mW and is essential in real applications.展开更多
By using an external-cavity frequency-doubling master oscillator fiber power amplifier （MOPA）, a 700 mW continuous-wave single-frequency laser source at 780 nm is produced. It is shown that the frequency doubling ef...By using an external-cavity frequency-doubling master oscillator fiber power amplifier （MOPA）, a 700 mW continuous-wave single-frequency laser source at 780 nm is produced. It is shown that the frequency doubling efficiency is improved when the seed diode laser is optically locked to a resonant frequency of a confocal Fabry-Perot （F-P） cavity. This phenomenon can be attributed to the narrowing of the 1.56 μm laser linewidth and explained by our presented theoretical model. The experimental results are found to be in good agreement with the theoretical predictions.展开更多
We propose a theoretical model to describe external-cavity distributed feedback semiconductor lasers and investigate the impact of the number of external feedback points on linewidth and side-mode suppression ratio th...We propose a theoretical model to describe external-cavity distributed feedback semiconductor lasers and investigate the impact of the number of external feedback points on linewidth and side-mode suppression ratio through numerical simulation. The simulation results demonstrate that the linewidth of external-cavity semiconductor lasers can be reduced by increasing the external cavity length and feedback ratio, and adding more external feedback points can further narrow the linewidth and enhance the side mode suppression ratio. This research provides insight into the external cavity distributed feedback mechanism and can guide the design of high-performance external cavity semiconductor lasers. .展开更多
This paper investigates the steady-state behavior of a semiconductor laser subject to arbitrary levels of external optical feedback by means of an iterative travelling-wave (ITW) model. Analytical expressions are deve...This paper investigates the steady-state behavior of a semiconductor laser subject to arbitrary levels of external optical feedback by means of an iterative travelling-wave (ITW) model. Analytical expressions are developed based on an iterative equation. We show that, as in good agreement with previous work, in the weak-feedback regime of operation except for a phase shift the ITW model will be simplified to the Lang-Kobayashi (LK) model, and that in the case where this phase shift is equal to zero the ITW model is identical to the LK model. The present work is of use in particular for distinguishing the coherence-collapse regime from the strong-feedback regime where low-intensity-noise and narrow-linewidth laser operation would be possible at high feedback levels with re-stabilization of the compound laser system.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.61274072)the National High Technology Research and Development Program of China(Grant No.2013AA014201)
文摘A wavelength-tunable mode-locked quantum dot laser using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. A dispersion prism, which has lower optical loss and less spectral narrowing than a blazed grating, is used for wavelength selection and tuning. A wavelength tuning range of 45.5 nm （from 1137.3 nm to 1182.8 nm） under 140-mA injection current in the passive mode-locked regime is achieved. The maximum average power of 19 mW is obtained at the 1170.3-nm wavelength, corresponding to the single pulse energy of 36.5 pJ.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61274072,60976057,and 60876086)
文摘A mode-locked external-cavity laser emitting at 1.17-μm wavelength using an InAs/GaAs quantum-dot gain medium and a discrete semiconductor saturable absorber mirror is demonstrated. By changing the external-cavity length, repetition rates of 854, 912, and 969 MHz are achieved respectively. The narrowest -3-dB radio-frequency linewidth obtained is 38 kHz, indicating that the laser is under stable mode-locking operation.
基金Project supported by the Foundation of Based Technology of China(Grant No.YXBGD20151JL01)the National Natural Science Foundation of China(Grant Nos.61376049,61604007,11674016,61378058,61575008,and 61574011)+1 种基金the Natural Science Foundation of Beijing City,China(Grant Nos.4172009 and4152003)the Beijing Municipal Commission of Education of China(Grant Nos.PXM2017 014204 500034 and PXM2016 014204 500018)
文摘Interference filter-stabilized external cavity diode lasers （ECDLs） have properties of simple configurations, high sta- bilities, and narrow linewidths. However, the interference filter used in common ECDL designs requires an ultra-narrow bandwidth （about 0.3 nm） to achieve mode selection, that is considerably expensive and not yet available for a wide range of wavelengths. In this paper, a robust ECDL using an available broad bandwidth （about 4 nm） interference filter as the wavelength discriminator is constructed and tested. The ECDL demonstrated a narrow Lorentzian fitted linewidth of 95 kHz and a spectral purity of 2.9 MHz. The long-term frequency stability of the ECDL reaches 5.59 x 10 12.
基金Project supported by the National Natural Science Foundation of China （Grant No 60438010）.
文摘Intensity modulation induced by the asymmetric external cavity in single-mode microchip Nd：YAG lasers is prosented. Two kinds of experimental results are discussed based on multiple feedback effects. In one case, the intensity modulation curve is a normal sine wave, whose fringe frequency is four times higher than that of a conventional optical feedback system, caused by multiple feedback effects. In the other case, the intensity modulation curve is the overlapping of the above quadruple-frequency signal and conventional optical feedback signal, which is determined by the additional phase difference induced by the asymmetric external cavity. The theoretical analyses are in good agreement with the experimental results. The quadruple-frequency modulation of the laser output intensity can greatly increase the resolution of displacement measurement of an optical feedback system.
文摘In order to choose appropriate frequency stabilization method in the atom gravimeter system under construction,Doppler-free dichroic atomic vapor laser lock(Doppler-free DAVLL)and saturated absorption spectroscopy(SAS)method were implemented on Rubidium atomic vapor.Basic principle and experimental details of both frequency stabilization methods were introduced.With restructuring of optical path and applying of self-made low noise photoelectric detector as well as digital lock module,excellent error signal was obtained.For each method,two sets of locking system were built and kept locked during3000 s′data acquisition.A frequency fluctuation of 629 k Hz when the laser is free running and of16.2 k Hz 31.4 k Hz after locked by SAS and Doppler-free DAVLL were calculated respectively,corresponding to a frequency stability of 1.64×10^(-9)in the condition of free running and 4.21×10^(-11)&8.18×10^(-11)after locked for averaging time of 10 s.The strength and weakness of both methods were elaborated with the demand of system miniaturization.After compared with SAS,Doppler-free DAVLL isconsidered to be a promising choice for miniaturization and modularization in atom interferometry gravimeter.
基金Jiangsu Province Key R&D Program(Industry Prospect and Common Key Technologies)(No.BE2014083)Jiangxi Natural Science Foundation Project(No.2019ACBL20054)。
文摘Narrow linewidth light source is a prerequisite for high-performance coherent optical communication and sensing.Waveguide-based external cavity narrow linewidth semiconductor lasers(WEC-NLSLs)have become a competitive and attractive candidate for many coherent applications due to their small size,volume,low energy consumption,low cost and the ability to integrate with other optical components.In this paper,we present an overview of WEC-NLSLs from their required technologies to the state-of-the-art progress.Moreover,we highlight the common problems occurring to current WEC-NLSLs and show the possible approaches to resolving the issues.Finally,we present the possible development directions for the next phase and hope this review will be beneficial to the advancements of WEC-NLSLs.
基金Project supported by the National Basic Research Program of China (Grant No. 2006CB604904)the National Natural Science Foundation of China (Grant Nos. 60976057, 60876086 and 60776037)
文摘A broadband external cavity tunable laser is realized by using a broad-emitting spectral InAs/GaAs quantum dot （QD） gain device. A tuning range of 69 nm with a central wavelength of 1056 nm, is achieved at a bias of 1.25 kA/cm^2only by utilizing the light emission from the ground state of QDs. This large tunable range only covers the QD ground-state emission and is related to the inhomogeneous size distribution of QDs. No excited state contributes to the tuning bandwidth. The application of the QD gain device to the external cavity tunable laser shows its immense potential in broadening the tuning bandwidth. By the external cavity feedback, the threshold current densitycan be reduced remarkably compared with the free-running QD gain device.
基金supported by the National Natural Science Foundation of China (No.51275523)the State Key Laboratory of Aerodynamics Research Fund (No.SKLA2019040302)。
文摘We present a compact and practical scheme of building a ~780 nm external cavity diode laser(ECDL) whose wavelength is mainly determined by an interference filter. The Lorentzian linewidth measured by the heterodyne beating between two identical lasers is 60 k Hz, and the geometry size of the laser is only 71.5 mm×65 mm×40 mm. The linear cavity design is less sensitive to misalignment induced by mechanical and thermal disturbances, and in comparison to a common grating-based design, the sensitivity to vibration is substantially reduced. Due to its excellent performance, the laser design has already been applied to cold atom trapping experiments. This interference filter ECDL method can also be extended to other wavelengths and widen the application range of diode laser.
基金Project supported by the National Key Basic Research and Development Program of China (Grant No. 2006CB604904)the National Natural Science Foundation of China (Grant Nos. 60976057, 60876086, 60776037, and 10775106)
文摘A broadband tunable grating-coupled external cavity laser is realized by employing a self-assembled InAs/GaAs quantum-dot （QD） superluminescent diode （SLD） as the gain device. The SLD device is processed with a bent-waveguide structure and facet antireflection （AR） coating. Tuning bandwidths of 106 nm and 117 nm are achieved under a-A and 3.5-A injection currents, respectively. The large tuning range originates essentially from the broad gain spectrum of self-assembled QDs. The bent waveguide structure combined with the facet AR coating plays a role in suppressing the inner-cavity lasing under a large injection current.
基金Supported by project Science and Technology Commission of Shanghai Municipality (026505027, 036505011)
文摘The estimation of the external quality factor is important for designing coupling devices for the cavities.A new representation of the external quality factor calculations for single-cell cavity coupled to a coaxial transmission line is derived based on analytic analysis and numeric analysis with the help of 3D electromagnetic code,and verified with experimental measurements at room temperature.In logarithmic scale the results for the external quality factor were quasi-linear over the limited range,and the simulated and measured data could be used and extrapolated to the superconducting case.For the unpolished 1.5 GHz 3rd harmonic superconducting cavity,the discrepancy between the evaluation value and measurement result is less than 25% within an acceptable deviation.
基金supported by the National Natural Science Foundation of China (Grant No 50575110)
文摘External-cavity birefringence feedback effects of the microchip Nd：YAG laser are presented. When a birefringence element is placed in the external feedback cavity of the laser, two orthogonally polarized laser beams with a phase difference are output. The phase difference is twice as large as the phase retardation in the external cavity along the two orthogonal directions. The variable extra-cavity birefringence, caused by rotation of the external-cavity birefringenee element, results in tunable phase difference between the two orthogonally polarized beams. This means that the roll angle information has been translated to phase difference of two output laser beams. A theoretical analysis based on the Fabry-Perot cavity equivalent model and refractive index ellipsoid is presented, which is in good agreement with the experimental results. This phenomenon has potential applications for roll angle measurement.
基金Project supported by the National Natural Science Foundation of China(Grant No.61274072)the National High Technology Research and Development Program of China(Grant No.2013AA014201)
文摘A wide wavelength tuning range swept external-cavity laser using an In As/Ga As quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Littrow telescope-less configuration. The swept laser generates greater than 54-m W peak output power and up to 33-k Hz sweep rate with a sweep range of 150 nm centered at 1155 nm. The effects of injection current and sweep rate on the sweep performance of the swept laser are studied.
基金supported by the National Natural Science Foundation of China (Grant Nos. 61274072, 60976057, 61176047, and 60876086)
文摘The optical performance of a grating-coupled external Continuous tuning from 1391 nm to 1468 nm is realized at cavity laser based on InAs/InP quantum dots is investigated. an injection current of 1900 mA. With the injection current increasing to 2300 mA, the tuning is blue shifted to some extent to the range from 1383 nm to 1461 nm. By combining the effect of the injection current with the grating tuning, the total tuning bandwidth of the external cavity quantum-dot laser can reach up to 85 nm. The dependence of the threshold current on the tuning wavelength is also presented.
基金the Key Laboratory of Functional Crystals and Laser Technology,Chinese Academy of Sciences(Grant No.JTJG201109)the Guangdong Province&Chinese Academy of Sciences Comprehensive Strategic Cooperation Project(Grant No.2010A090100014)the 2009 Technology Research and Development Fund of Shenzhen,China(Grant No.O702011001)
文摘A 1550-nm linearly tunable continuous wave （CW） single-mode external cavity diode laser （ECDL） based on a singlecavity all-dielectric thin-film Fabry-Pérot filter （s-AFPF） is proposed and realized in this paper. Its internal optical components as well as their operation mechanisms are introduced first, and then its longitudinal mode output characteristic is theoretically analyzed. Afterwards, we set up the experimental platform for the output characteristic measurement of this tunable ECDL; under different experimental conditions, we execute accurate and real-time measurements for the output central wavelength, output optical power, output longitudinal mode distribution, and the line-width of the tunable ECDL in its tuning process. By summing up the optimal experimental condition from the measured data, we obtain the optimal tunable ECDL relevant parameters： the tunable ECDL has a linear mode-hop-free wavelength tuning region of 1547.203 nm-1552.426 nm, a stable output optical power in the range of 40 μW-50 μW, and a stable output longitudinal mode distribution of a single longitudinal mode with a line-width in the range of 100 MHz-150 MHz. This tunable ECDL can be used in environmental gas monitoring, atomic and molecular laser spectroscopy research, precise measurements, and so on.
文摘This paper presents the diffraction effects on the performance of a dual external cavity tunable laser source, whose external cavities are constructed by micro electro mechanical systems (MEMS). One of the main problems in these structures is the optical diffraction as the emitting surface of the laser diode is usually quite limited in the transverse directions. The emitted beam diffracts rapidly in the air and only a small amount of light is coupled back to the source that usually limits the tuning range of the source. Device characteristics such as tuning range, wavelength shift and sensitivity are evaluated. New expression is used and multiple reflections inside external cavities are considered. The simulation results have shown that single external cavity has limited tuning range. It is shown that multiple reflections have significant effect in our model. To get a better engineering for the dual ECTL dimensions, diffraction effects must be taken into account.
文摘A diode laser array(DLA)positioned in an external cavity can receive the radiations emitted from its neighboring elements (C 1) and that of itself (S) after being reflected at the DLA facet as well as from the external mirror (C 0). Considering the fact that｜C 0/S｜ should be larger than unity if the external cavity is effective,and｜C 1/S｜ should be larger than unity if the phase locking may be established in the external cavity.The requirements on the reflection at the facet of the diode laser array have been specified in terms of the cavity length and reflection coefficient of the external mirror.
基金Supported by the National Basic Research Program of China under Grant No 2013CB632801the National Key Research and Development Program of China under Grant No 2016YFB0402303+2 种基金the National Natural Science Foundation of China under Grant Nos 61435014,61627822,61574136,61306058 and 61404131the Key Projects of Chinese Academy of Sciences under Grant No ZDRW-XH-2016-4the Beijing Natural Science Foundation under Grant No 4162060
文摘An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow configuration. Taking advantage of the single-lobed fundamental supermode far-field pattern, the tuning capa- bility of 30.6cm-1 is achieved with a fixed injected current of 3.5 A at room temperature. Single-mode emission can be observed in the entire process. The maximum single-mode output power of the external cavity setup is as high as 25mW and is essential in real applications.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 60527003,60608011 and 60878003)the State Key Program for Basic Research of China (Grant No 2007CB316501)
文摘By using an external-cavity frequency-doubling master oscillator fiber power amplifier （MOPA）, a 700 mW continuous-wave single-frequency laser source at 780 nm is produced. It is shown that the frequency doubling efficiency is improved when the seed diode laser is optically locked to a resonant frequency of a confocal Fabry-Perot （F-P） cavity. This phenomenon can be attributed to the narrowing of the 1.56 μm laser linewidth and explained by our presented theoretical model. The experimental results are found to be in good agreement with the theoretical predictions.
文摘We propose a theoretical model to describe external-cavity distributed feedback semiconductor lasers and investigate the impact of the number of external feedback points on linewidth and side-mode suppression ratio through numerical simulation. The simulation results demonstrate that the linewidth of external-cavity semiconductor lasers can be reduced by increasing the external cavity length and feedback ratio, and adding more external feedback points can further narrow the linewidth and enhance the side mode suppression ratio. This research provides insight into the external cavity distributed feedback mechanism and can guide the design of high-performance external cavity semiconductor lasers. .
文摘This paper investigates the steady-state behavior of a semiconductor laser subject to arbitrary levels of external optical feedback by means of an iterative travelling-wave (ITW) model. Analytical expressions are developed based on an iterative equation. We show that, as in good agreement with previous work, in the weak-feedback regime of operation except for a phase shift the ITW model will be simplified to the Lang-Kobayashi (LK) model, and that in the case where this phase shift is equal to zero the ITW model is identical to the LK model. The present work is of use in particular for distinguishing the coherence-collapse regime from the strong-feedback regime where low-intensity-noise and narrow-linewidth laser operation would be possible at high feedback levels with re-stabilization of the compound laser system.
