Thermal runaway is a critical issue for the large application of lithium-ion batteries.Exothermic reactions between lithiated graphite and electrolyte play a crucial role in the thermal runaway of lithium-ion batterie...Thermal runaway is a critical issue for the large application of lithium-ion batteries.Exothermic reactions between lithiated graphite and electrolyte play a crucial role in the thermal runaway of lithium-ion batteries.However,the role of each component in the electrolyte during the exothermic reactions with lithiated graphite has not been fully understood.In this paper,the exothermic reactions between lithiated graphite and electrolyte of lithium-ion battery are investigated through differential scanning calorimetry(DSC) and evolved gas analysis.The lithiated graphite in the presence of electrolyte exhibit three exothermic peaks during DSC test.The reactions between lithiated graphite and LiPF_(6) and ethylene carbonate are found to be responsible for the first two exothermic peaks,while the third exothermic peak is attributed to the reaction between lithiated graphite and binder.In contrast,diethylene carbonate and ethyl methyl carbonate contribute little to the total heat generation of graphite-electrolyte reactions.The reaction mechanism between lithiated graphite and electrolyte,including the major reaction equations and gas products,are summarized.Finally,DSC tests on samples with various amounts of electrolyte are performed to clarify the quantitative relationship between lithiated graphite and electrolyte during the exothermic reactions.2.5 mg of lithiated graphite (Li_(0.8627)C_(6)) can fully react with around 7.2 mg electrolyte,releasing a heat generation of 2491 J g^(-1).The results presented in this study can provide useful guidance for the safety improvement of lithium-ion batteries.展开更多
Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas c...Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant （Ea/R） have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.展开更多
A number of dry bridges have been built to substitute for the roadbed on the Qinghai-Tibet Railway,China.The aim of this study was to investigate the exothermic process of cast-in-place (CIP) pile foundation of a dry ...A number of dry bridges have been built to substitute for the roadbed on the Qinghai-Tibet Railway,China.The aim of this study was to investigate the exothermic process of cast-in-place (CIP) pile foundation of a dry bridge and its harm to the stability of nearby frozen ground.We present 3D heat conduction functions of a concrete pile and of frozen ground with related boundaries.Our analysis is based on the theory of heat conduction and the exponent law describing the adiabatic temperature rise caused by hydration heat.Results under continuous and initial conditions were combined to establish a finite element model of a CIP pile-frozen ground system for a dry bridge under actual field conditions in cold regions.Numerical results indicated that the process could effectively simulate the exothermic process of CIP pile foundation.Thermal disturbance to frozen ground under a long dry bridge caused by the casting temperature and hydration heat of CIP piles was substantial and long-lasting.The simulated thermal analysis results agreed with field measurements and some significant rules relating to the problem were deduced and conclusions reached.展开更多
It is shown in this article that by changing the initial operation condition of the batch processes, the dynamic performance of the system can be varied largely, especially for the initial operational temperature of t...It is shown in this article that by changing the initial operation condition of the batch processes, the dynamic performance of the system can be varied largely, especially for the initial operational temperature of the exothermic reaction. The initial operation condition is often ignored in the designing batch processes for flexibility against disturbances or parameter variations. When the initial condition is not rigid as in the case of a batch reactor, where the initial reaction temperature is quite arbitrary, optimization can also be applied to determine the ＂best＂ initial condition to use. Problems for dynamic flexibility analysis of exothermic reaction including initial temperature and process operation can be formulated as dynamic optimization problems. Formulations are derived when the initial conditions are considered or not. When the initial conditions are considered, the initial condition can be transferred into control variables in the first optimal step. The solution of the dynamic optimization is on the basis of Rugge-Kutta integration algorithm and decomposition search algorithm. This method, as illustrated and tested with two highly nonlinear process problems, enables the determination of the optimal level. The dynamic performance is improved by the proposed method in the two exothermic reaction examples.展开更多
The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied.These experiments were carried out in MoSi_2 laboratory furnace with 0.2 kg mo...The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied.These experiments were carried out in MoSi_2 laboratory furnace with 0.2 kg molten steel for equilibrium test and 2 kg molten steel for simulation test respectively.These results showed that the adjusting basicity of top slag with CaO is effective to prevent rephosphorization and resulphurization,and it is possible to dephosphorize and desulphurize and remove the inclusions from molten steel when basicity R of the top slag is adjusted to 2.0 — 3.10,and SiCaBa alloy is better than SiFe alloy in this relation.展开更多
MXene,a new type of two-dimensional materials,have been demonstrated as one of the best photothermal materials owing to their strong light-matter interaction and high photothermal conversion efficiency in recent years...MXene,a new type of two-dimensional materials,have been demonstrated as one of the best photothermal materials owing to their strong light-matter interaction and high photothermal conversion efficiency in recent years.Herein,we report the intriguing light-to-heat conversion property of vanadium carbide(V_(2)C)MXene under irradiation of millisecond laser pulse.Unlike the typical photothermal materials,the V_(2)C MXene not only converts the incident laser energy to heat by the physical photothermal effect,but also triggers the exothermic oxidation of the V_(2)C MXene.The oxidation could be greatly promoted with addition of plasmonic Au nanorods(Au NRs)for light absorption enhancement.Owing to the unique light-to-heat conversion property,the Au NRs/V_(2)C MXene membrane could serve as high temperature pulse(HTP)generators that is proposed for numerous applications with high demand for immediacy.As a proof-of concept application,Au NRs/V_(2)C MXene membrane was applied for laser ignition of the high energy density materials,such as 2,4,6,8,10,12-(hexanitrohexaaza)cyclododecane(HNIW or CL-20).An improved ignition performance,in terms of lowered laser threshold,is achieved as compared to the state-of-the-art light-to-heat conversion materials.展开更多
For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)M...For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)MICs via electrophoresis assembly of nano-Al and WO_(3)particles fabricated by hydrothermal synthesis method,followed by the subsequent fluorination treatment.A combination of X ray diffraction(XRD),field emission scanning electron microscope(FESEM),energy dispersive X-ray spectroscopy(EDX),and Fourier transform infrared spectroscopy(FT-IR)techniques were utilized in order to characterize the crystal structure,microstructure,and elemental composition distribution of target films after different natural exposure tests.The product with uniform distribution and high purity possesses a high contact angle of~170°and a minute sliding angle of~1°,and displays the outstanding anti-wetting property using droplets with different surface tensions.It also shows great moisture stability in high relative-humidity circumstances after one year of the natural exposure experiment.Notably,the heat output of a fresh sample can reach up to 2.3 kJ/g and retain 96%after the whole exposure test,showing outstanding thermo-stability for at least one year.This work further proposed the mechanism of antiwetting Al/WO_(3)MICs considering the variation tendency of their DSC curve,providing a valuable theoretical reference for designing other self-protected MICs with a long exothermic life-span applied in wide fields of national defense,military industry,etc.展开更多
Since photo-induced polymerization of the ultra-violet(UV)-curing adhesive from a fluid state to a solid state is an exothermic process,the UV curing exothermic behavior can be regarded as a potential evaluation metho...Since photo-induced polymerization of the ultra-violet(UV)-curing adhesive from a fluid state to a solid state is an exothermic process,the UV curing exothermic behavior can be regarded as a potential evaluation methodology to analyze UV-curing kinetics.Herein,a fiber Bragg grating(FBG)-based UV curing exothermic behavior monitoring is proposed to evaluate the UV-curing dynamic process and analyze a series of thermal and mechanical properties changes during curing.The exothermic behavior of the UV curing adhesive during curing and the feasibility of FBG-based curing kinetic analysis scheme are verified experimentally,full cycle cure monitoring of the UV curing adhesive can be realized by this FBG-based curing kinetic analysis scheme,and the UV-curing kinetics of four different types of the UV curing adhesive are corresponding to different exothermic behaviors.Compared with curing process evaluation based on refractive index variation,this FBG-based exothermic behavior monitoring has the ability to extract more details of the curing process,and some curing stages with negligible refractive index changes also can be distinguished.By using this proposed scheme,the UV-curing dynamic process and multiple characteristic parameters,such as curing time,time constant,transient temperature rise,and residual stress,can be evaluated,which may contribute to evaluating and analyzing UV-curing kinetics more comprehensively.展开更多
Thermochemical energy storage based on CaO/CaCO_(3)cycles has obtained significant attention as an alternative energy storage solution for concentrated solar power plants.In view of the applicability of fluidized bed ...Thermochemical energy storage based on CaO/CaCO_(3)cycles has obtained significant attention as an alternative energy storage solution for concentrated solar power plants.In view of the applicability of fluidized bed reactors for CaO/CaCO_(3)heat storage,it is imperative to study the factors related to the heat release performance of CaO.This work presents an exothermic experiment on calcined limestone under fluidization,exploring the impact of initial temperature,CO_(2)concentration,particle size,superficial gas velocity,and number of cycles on the exothermic performance of CaO.The result indicates that CaO with high initial temperature leads to higher exothermic temperature,with better exothermic stability under cycles.An optimal initial temperature range of 600℃-650℃exists with an actual CaO conversion rate deviating merely 2%from theoretical conversion.Higher CO_(2)concentration augments the exothermic temperature and rate of CaO,while also improves the effective conversion of CaO.Nevertheless,high CO_(2)concentrations exacerbate the sintering and deactivation of CaO.High superficial gas velocity and small particle size shorten the exothermic time by increasing heat dissipation,but has minimal effect on the exothermic properties.Finally,the exothermic properties of CaO under fluidized and static conditions are studied.The result shows that exothermic temperature and exothermic rate of CaO under fluidization are enhanced,displaying higher heat storage performance than that under static state.This study provides valuable insights for optimizing the exothermic performance of CaO in fluidized bed reactors,contributing to advanced thermochemical energy storage for concentrated solar power plants.展开更多
The first exothermic peak of cement-based material occurs a few minutes after mixing,and the properties of three dimensional(3D)printed concrete,such as setting time,are very sensitive to this.Against this background,...The first exothermic peak of cement-based material occurs a few minutes after mixing,and the properties of three dimensional(3D)printed concrete,such as setting time,are very sensitive to this.Against this background,based on the classical Park cement exothermic model of hydration,we propose and construct a numerical model of the first exothermic peak,taking into account the proportions of C_(3)S,C_(3)A and quicklime in particular.The calculated parameters are calibrated by means of relevant published exothermic test data.It is found that this developed model offers a good simulation of the first exothermic peak of hydration for C_(3)S and C_(3)A proportions from 0 to 100% of cement clinker and reflects the effect of quicklime content at 8%-10%.The unique value of this research is provision of an important computational tool for applications that are sensitive to the first exothermic peak of hydration,such as 3D printing.展开更多
The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied. These experiments were carried out in MoSi 2 laboratory furnace with 0 2?kg...The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied. These experiments were carried out in MoSi 2 laboratory furnace with 0 2?kg molten steel for equilibrium test and 2?kg molten steel for simulation test respectively. These results showed that the adjusting basicity of top slag with CaO is effective to prevent rephosphorization and resulphurization, and it is possible to dephosphorize and desulphurize and remove the inclusions from molten steel when basicity R of the top slag is adjusted to 2 0-3 10, and SiCaBa alloy is better than SiFe alloy in this relation.展开更多
For the characteristics of the continuous stirred-tank reactor(CSTR) with coil and jacket cooling system,a CSTR temperature dual control solution based on the analysis of the CSTR exothermic reaction control character...For the characteristics of the continuous stirred-tank reactor(CSTR) with coil and jacket cooling system,a CSTR temperature dual control solution based on the analysis of the CSTR exothermic reaction control characteristic was proposed for an organic material polymerization production.The control solution has passive fault-tolerant ability for the jacket cooling water cutting off fault and active fault-tolerant potential for the coil cooling water cutting off fault,and it has good control ability,high saving energy and reducing consumption performance.Fault detection and diagnosis and fault-tolerant control strategy are designed for the coil cooling fault to achieve the active fault-tolerant control function.The CSTR temperature dual control,process fault detection and diagnosis and active fault-tolerant control were full integrated into the CSTR temperature fault-tolerant control system,which achieve fault tolerance control of CSTR temperature for any severe malfunction of jacket cooling or coil cooling cutting off,and the security for CSTR exothermic reaction is improved.Finally,the effectiveness of this system was validated by semi-physical simulation experiment.展开更多
Photoisomerization-induced phase change are important for co-harvesting the latent heat and isomerization energy of azobenzene molecules.Chemically optimizing heat output and energy delivery at alternating temperature...Photoisomerization-induced phase change are important for co-harvesting the latent heat and isomerization energy of azobenzene molecules.Chemically optimizing heat output and energy delivery at alternating temperatures are challenging because of the differences in crystallizability and isomerization.This article reports two series of asymmetrically alkyl-grafted azobenzene(Azo-g),with and without a methyl group,that have an optically triggered phase change.Three exothermic modes were designed to utilize crystallization enthalpy(△H_(c))and photothermal(isomerization)energy(△H_(p))at different temperatures determined by the crystallization.Azo-g has high heat output(275-303 J g^(-1))by synchronously releasing△H_(c)and△H_(p)over a wide temperature range(-79℃to 25℃).We fabricated a new distributed energy utilization and delivery system to realize a temperature increase of 6.6℃at a temperature of-8℃.The findings offer insight into selective utilization of latent heat and isomerization energy by molecular optimization of crystallization and isomerization processes.展开更多
Herein,the interaction of a protein,bovine serum albumin(BSA),with tetradecyltrimethylammonium bromide(TTAB,a cationic surfactant),has been investigated using the conductivity measurement technique in pure water and s...Herein,the interaction of a protein,bovine serum albumin(BSA),with tetradecyltrimethylammonium bromide(TTAB,a cationic surfactant),has been investigated using the conductivity measurement technique in pure water and some sodium salts(NaCl,Na_(2) SO_(4),Na_(2) CO_(3), and Na_(3) PO_(4)) solutions at temperature range of 295.15-320.15 K.Results reveal that,in the plot of specific conductivity versus the concentration of TTAB,only a single critical micelle concentration(cmc) was found for the TTAB+BSA mixed system in all solvents media studied.The addition of BSA in aqueous TTAB solution,the value of cmc undergoes a change from its pure form,which indicates the presence of strong interaction operating between the BSA and TTAB molecules.In aqueous system,the cmc values of the TTAB+BSA mixtures are obtained higher compared to the values found for single TTAB surfactant However,the addition of salt decreases the cmc value of mixed TTAB+BSA system.The values of cmc of the BSA+TTAB mixed system at 310.15 K and 1.00 mmol·kg^(-1) ionic strength of salt followed the order:cmc_(Na_(2) CO_(3))> Cmcc_(Na_(3) PO_(4))> cmcNaCl>cMC_(Na_(2) SO_(4)).The cmc values of TTAB+BSA mixture were found to be lowered in urea solution within the concentrations studied.The values of degree of dissociation(α) and fraction of counter ion binding(β) were found to be dependent on additives and temperature.The free energy of micellization(AGm) is negative for all the systems,which manifests that the micellization phenomenon is energetically spontaneous.The enhancement of the negative value of △G_(m)^(0) in aqueous salt solutions reveals an increase of spontaneity of the TTAB+BSA micellization process.The values of △G_(m)^(0) also reveal that the spontaneity of micelle formation is enhanced at higher temperatures in all media studied.The values of free energy of transfer(△G_(m,t)^(o)) were also determined for numerous solvent media used in the present study and described with appropriate reasoning.展开更多
Based on the experiment and the thermodynamics analysis for CuO/Al system, it is founded that the compounding reaction of CuO/Al under low temperature is available. The general equation of adiabatic temperature of the...Based on the experiment and the thermodynamics analysis for CuO/Al system, it is founded that the compounding reaction of CuO/Al under low temperature is available. The general equation of adiabatic temperature of the system is set up, and the influence of resultant concentration and temperature on adiabatic temperature is theoretically analyzed. The values of heat effect of CuO/Al system under different temperature are also caculated.展开更多
Two kinds of glassy sulfurs are synthesized by thrapid compression method from liquid sulfur at temperatures below and above the X-transition point. The glassy sulfur has different colors and transparencies, depending...Two kinds of glassy sulfurs are synthesized by thrapid compression method from liquid sulfur at temperatures below and above the X-transition point. The glassy sulfur has different colors and transparencies, depending on temperature, which may inherit some structural information from the transition. Raman spectrum studies of these samples show that a large fraction of polymeric chains exist in the glassy sulfur, even in the one solidified from T 〈 Tλ. We find that a higher compression rate instead of a higher temperature of the parent liquid captures more polymeric chains. Pressure-induced glassy sulfur presents high thermal stability compared with temperature quenched glassy sulfur and could transform into liquid sulfur directly without crystallization through an abnormal exothermic melting course. High energy x-ray diffraction is utilized to study the local order of the pressure-induced glassy sulfur.展开更多
Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computati...Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computation. To facilitate the implementation of NMPC in batch processes, we propose a real-time updated model predictive control method based on state estimation. The method includes two strategies: a multiple model building strategy and a real-time model updated strategy. The multiple model building strategy is to produce a series of sim-plified models to reduce the on-line computational complexity of NMPC. The real-time model updated strategy is to update the simplified models to keep the accuracy of the models describing dynamic process behavior. The me-thod is validated with a typical batch reactor. Simulation studies show that the new method is efficient and robust with respect to model mismatch and changes in process parameters.展开更多
The present study focuses on investigating the microstructural evolutions and mechanical properties of energetic Al_(1)(TiZrNbTaMoCr)_(15) refractory high-entropy alloys with the different heat treatments at low Al co...The present study focuses on investigating the microstructural evolutions and mechanical properties of energetic Al_(1)(TiZrNbTaMoCr)_(15) refractory high-entropy alloys with the different heat treatments at low Al content state. It is found that even with a reduction in the Al content, the strength of these alloys remains unaffected at room temperature and high temperature, while the plasticity improves significantly. In particular, the coherent BCC/B_(2) microstructure with needle-like B_(2) nanoprecipitates dispersed into the BCC matrix is formed in 873 K-aged Al_(1)Ti_(6)Zr_(2)Nb_(3)Ta_(3)Mo_(0.5)Cr_(0.5) alloy. Therefore, this alloy exhibits the highest compression yield strength (σ_(YS) = 1333 and 717 MPa) at room temperature and 1073 K, respectively. After 973 K-aged, the coherent BCC/B_(2) microstructure underwent destabilization, and the B_(2) phase transforms into the brittle Zr5Al3 phase which then coarsens and dominates the microstructure of S3-AlTa_(3) alloy after 1073 K-aged. Moreover, these current alloys exhibit exceptionally high theoretical exothermic enthalpy (ΔH), surpassing 11606 J·g^(−1), which highlights their significant potential as innovative high-performance energetic structural materials.展开更多
Differential scanning calorimetry (DSC) provides easy screening for thermal hazard evaluation. Here, we investigate the difference between using glass and stainless-steel vessels on the DSC measurement of exothermic d...Differential scanning calorimetry (DSC) provides easy screening for thermal hazard evaluation. Here, we investigate the difference between using glass and stainless-steel vessels on the DSC measurement of exothermic decomposition energy (QDSC) for 41 chemical substances (containing nitro, halogen, peroxide, and sulfur groups, and hydrazine bonds). Two borosilicate glass vessels (capillary and ampule) and one stainless-steel vessel were used. All QDSC values obtained were investigated with reference to the permissible fluctuation range specified by the ASTM (American Society for Testing and Materials) international Both glass vessels produced very similar QDSC values, despite different sample scales. The QDSC values obtained with the glass vessels were generally roughly within the variation tolerance range of the stainless-steel vessel. Notable exceptions were halogen- or sulfur-containing compounds;these exhibited smaller QDSC values with glass vessels in almost all cases. We will investigate whether certain structures in compounds react with stainless steel. The vessel material choice is crucial in evaluating the true reactivity of a substance.展开更多
Cancer cells are irresponsive to the central control of the cell growth mechanisms. It is difficult to turn on the responsive mechanism of cancer cells because the cells are completely dissociated from the central com...Cancer cells are irresponsive to the central control of the cell growth mechanisms. It is difficult to turn on the responsive mechanism of cancer cells because the cells are completely dissociated from the central command and on their own in terms of cell division and growth. Precisely, this is the reason why they are at risk to the health of humans and/or any biological entities. Instead of trying to reconnect the central command of the growth control mechanism to cancer cells that are already out of the range, we present a method for using the cancer cell’s own irresponsive and uncontrolled growth mechanism to their disadvantage and destroy the cancer cells. We found that this is achievable in an atomic/molecular level study of the glucose molecule, which is the primary food source used for growth and energy generation by all cells in the body, including cancer cells. Testimonials of the clinical trial of the supplement provide proof of dramatic recovery from the advanced stage of cancer in seven days.展开更多
基金supported by the Key-Area Research and Development Program of Guangdong Province (2020B090919004)the Ministry of Science and Technology of China (2019YFE0100200)+3 种基金the National Natural Science Foundation of China (52007099, 51706117, 52076121, 51877138)the Shanghai Science and Technology Development Fund (19QA1406200)the China Postdoctoral Science Foundation (2020M680550)the support from the “Shuimu Tsinghua Scholar Program” from Tsinghua University。
文摘Thermal runaway is a critical issue for the large application of lithium-ion batteries.Exothermic reactions between lithiated graphite and electrolyte play a crucial role in the thermal runaway of lithium-ion batteries.However,the role of each component in the electrolyte during the exothermic reactions with lithiated graphite has not been fully understood.In this paper,the exothermic reactions between lithiated graphite and electrolyte of lithium-ion battery are investigated through differential scanning calorimetry(DSC) and evolved gas analysis.The lithiated graphite in the presence of electrolyte exhibit three exothermic peaks during DSC test.The reactions between lithiated graphite and LiPF_(6) and ethylene carbonate are found to be responsible for the first two exothermic peaks,while the third exothermic peak is attributed to the reaction between lithiated graphite and binder.In contrast,diethylene carbonate and ethyl methyl carbonate contribute little to the total heat generation of graphite-electrolyte reactions.The reaction mechanism between lithiated graphite and electrolyte,including the major reaction equations and gas products,are summarized.Finally,DSC tests on samples with various amounts of electrolyte are performed to clarify the quantitative relationship between lithiated graphite and electrolyte during the exothermic reactions.2.5 mg of lithiated graphite (Li_(0.8627)C_(6)) can fully react with around 7.2 mg electrolyte,releasing a heat generation of 2491 J g^(-1).The results presented in this study can provide useful guidance for the safety improvement of lithium-ion batteries.
基金Funded by the National Natural Science Foundation of China(Nos.51109071,51209219)Jiangsu Province Natural Science Foundation(No.BK2010517)
文摘Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant （Ea/R） have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.
基金Project supported by the National Natural Science Foundation of China (No.50678076)the Opening Foundation of the State Key Laboratory of Frozen Soil Engineering (No.SKLFSE200603),China
文摘A number of dry bridges have been built to substitute for the roadbed on the Qinghai-Tibet Railway,China.The aim of this study was to investigate the exothermic process of cast-in-place (CIP) pile foundation of a dry bridge and its harm to the stability of nearby frozen ground.We present 3D heat conduction functions of a concrete pile and of frozen ground with related boundaries.Our analysis is based on the theory of heat conduction and the exponent law describing the adiabatic temperature rise caused by hydration heat.Results under continuous and initial conditions were combined to establish a finite element model of a CIP pile-frozen ground system for a dry bridge under actual field conditions in cold regions.Numerical results indicated that the process could effectively simulate the exothermic process of CIP pile foundation.Thermal disturbance to frozen ground under a long dry bridge caused by the casting temperature and hydration heat of CIP piles was substantial and long-lasting.The simulated thermal analysis results agreed with field measurements and some significant rules relating to the problem were deduced and conclusions reached.
基金Supported by the National Natural Science Foundation of China （20536020, 20876056）.
文摘It is shown in this article that by changing the initial operation condition of the batch processes, the dynamic performance of the system can be varied largely, especially for the initial operational temperature of the exothermic reaction. The initial operation condition is often ignored in the designing batch processes for flexibility against disturbances or parameter variations. When the initial condition is not rigid as in the case of a batch reactor, where the initial reaction temperature is quite arbitrary, optimization can also be applied to determine the ＂best＂ initial condition to use. Problems for dynamic flexibility analysis of exothermic reaction including initial temperature and process operation can be formulated as dynamic optimization problems. Formulations are derived when the initial conditions are considered or not. When the initial conditions are considered, the initial condition can be transferred into control variables in the first optimal step. The solution of the dynamic optimization is on the basis of Rugge-Kutta integration algorithm and decomposition search algorithm. This method, as illustrated and tested with two highly nonlinear process problems, enables the determination of the optimal level. The dynamic performance is improved by the proposed method in the two exothermic reaction examples.
基金Sponsored by National Natural Science Foundation(59874014)
文摘The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied.These experiments were carried out in MoSi_2 laboratory furnace with 0.2 kg molten steel for equilibrium test and 2 kg molten steel for simulation test respectively.These results showed that the adjusting basicity of top slag with CaO is effective to prevent rephosphorization and resulphurization,and it is possible to dephosphorize and desulphurize and remove the inclusions from molten steel when basicity R of the top slag is adjusted to 2.0 — 3.10,and SiCaBa alloy is better than SiFe alloy in this relation.
基金the National Natural Science Foundation of China (21703217, 11702264, 11702268, 11802276, 11772307) for financial support
文摘MXene,a new type of two-dimensional materials,have been demonstrated as one of the best photothermal materials owing to their strong light-matter interaction and high photothermal conversion efficiency in recent years.Herein,we report the intriguing light-to-heat conversion property of vanadium carbide(V_(2)C)MXene under irradiation of millisecond laser pulse.Unlike the typical photothermal materials,the V_(2)C MXene not only converts the incident laser energy to heat by the physical photothermal effect,but also triggers the exothermic oxidation of the V_(2)C MXene.The oxidation could be greatly promoted with addition of plasmonic Au nanorods(Au NRs)for light absorption enhancement.Owing to the unique light-to-heat conversion property,the Au NRs/V_(2)C MXene membrane could serve as high temperature pulse(HTP)generators that is proposed for numerous applications with high demand for immediacy.As a proof-of concept application,Au NRs/V_(2)C MXene membrane was applied for laser ignition of the high energy density materials,such as 2,4,6,8,10,12-(hexanitrohexaaza)cyclododecane(HNIW or CL-20).An improved ignition performance,in terms of lowered laser threshold,is achieved as compared to the state-of-the-art light-to-heat conversion materials.
基金funded by the financial support from National Natural Science Foundation of China(Grant No 21805014 and No82102635)Science and Technology Research Project of Chongqing Education Board(Grant No.KJQN201901428)。
文摘For solving the dilemma of the short exothermic life-span of WO_(3)based metastable interstitial composites(MICs)with extensive application prospect,this paper has firstly designed the promising antiwetting Al/WO_(3)MICs via electrophoresis assembly of nano-Al and WO_(3)particles fabricated by hydrothermal synthesis method,followed by the subsequent fluorination treatment.A combination of X ray diffraction(XRD),field emission scanning electron microscope(FESEM),energy dispersive X-ray spectroscopy(EDX),and Fourier transform infrared spectroscopy(FT-IR)techniques were utilized in order to characterize the crystal structure,microstructure,and elemental composition distribution of target films after different natural exposure tests.The product with uniform distribution and high purity possesses a high contact angle of~170°and a minute sliding angle of~1°,and displays the outstanding anti-wetting property using droplets with different surface tensions.It also shows great moisture stability in high relative-humidity circumstances after one year of the natural exposure experiment.Notably,the heat output of a fresh sample can reach up to 2.3 kJ/g and retain 96%after the whole exposure test,showing outstanding thermo-stability for at least one year.This work further proposed the mechanism of antiwetting Al/WO_(3)MICs considering the variation tendency of their DSC curve,providing a valuable theoretical reference for designing other self-protected MICs with a long exothermic life-span applied in wide fields of national defense,military industry,etc.
基金supported by the National Natural Science Foundation of China(Grant Nos.62275039 and 61705189)Fundamental Research Funds for the Central Universities,China(Grant No.DUT24MS022)State Key Laboratory of Advanced Optical Communication Systems and Networks,China(Grant No.2022GZKF001).
文摘Since photo-induced polymerization of the ultra-violet(UV)-curing adhesive from a fluid state to a solid state is an exothermic process,the UV curing exothermic behavior can be regarded as a potential evaluation methodology to analyze UV-curing kinetics.Herein,a fiber Bragg grating(FBG)-based UV curing exothermic behavior monitoring is proposed to evaluate the UV-curing dynamic process and analyze a series of thermal and mechanical properties changes during curing.The exothermic behavior of the UV curing adhesive during curing and the feasibility of FBG-based curing kinetic analysis scheme are verified experimentally,full cycle cure monitoring of the UV curing adhesive can be realized by this FBG-based curing kinetic analysis scheme,and the UV-curing kinetics of four different types of the UV curing adhesive are corresponding to different exothermic behaviors.Compared with curing process evaluation based on refractive index variation,this FBG-based exothermic behavior monitoring has the ability to extract more details of the curing process,and some curing stages with negligible refractive index changes also can be distinguished.By using this proposed scheme,the UV-curing dynamic process and multiple characteristic parameters,such as curing time,time constant,transient temperature rise,and residual stress,can be evaluated,which may contribute to evaluating and analyzing UV-curing kinetics more comprehensively.
基金Financial supports from the National Natural Science Foundation of China(52276204)the Shandong Provincial Natural Science Foundation(ZR2020ME188)。
文摘Thermochemical energy storage based on CaO/CaCO_(3)cycles has obtained significant attention as an alternative energy storage solution for concentrated solar power plants.In view of the applicability of fluidized bed reactors for CaO/CaCO_(3)heat storage,it is imperative to study the factors related to the heat release performance of CaO.This work presents an exothermic experiment on calcined limestone under fluidization,exploring the impact of initial temperature,CO_(2)concentration,particle size,superficial gas velocity,and number of cycles on the exothermic performance of CaO.The result indicates that CaO with high initial temperature leads to higher exothermic temperature,with better exothermic stability under cycles.An optimal initial temperature range of 600℃-650℃exists with an actual CaO conversion rate deviating merely 2%from theoretical conversion.Higher CO_(2)concentration augments the exothermic temperature and rate of CaO,while also improves the effective conversion of CaO.Nevertheless,high CO_(2)concentrations exacerbate the sintering and deactivation of CaO.High superficial gas velocity and small particle size shorten the exothermic time by increasing heat dissipation,but has minimal effect on the exothermic properties.Finally,the exothermic properties of CaO under fluidized and static conditions are studied.The result shows that exothermic temperature and exothermic rate of CaO under fluidization are enhanced,displaying higher heat storage performance than that under static state.This study provides valuable insights for optimizing the exothermic performance of CaO in fluidized bed reactors,contributing to advanced thermochemical energy storage for concentrated solar power plants.
基金financially supported by the National Natural Science Foundation of China(Grant No.52178240)the Shanghai Scientific Research Program(No.21DZ1200401).
文摘The first exothermic peak of cement-based material occurs a few minutes after mixing,and the properties of three dimensional(3D)printed concrete,such as setting time,are very sensitive to this.Against this background,based on the classical Park cement exothermic model of hydration,we propose and construct a numerical model of the first exothermic peak,taking into account the proportions of C_(3)S,C_(3)A and quicklime in particular.The calculated parameters are calibrated by means of relevant published exothermic test data.It is found that this developed model offers a good simulation of the first exothermic peak of hydration for C_(3)S and C_(3)A proportions from 0 to 100% of cement clinker and reflects the effect of quicklime content at 8%-10%.The unique value of this research is provision of an important computational tool for applications that are sensitive to the first exothermic peak of hydration,such as 3D printing.
文摘The effect of top slag basicity on quality of steel treated with SiFe and SiCaBa alloy as exothermic agent in chemical heating was studied. These experiments were carried out in MoSi 2 laboratory furnace with 0 2?kg molten steel for equilibrium test and 2?kg molten steel for simulation test respectively. These results showed that the adjusting basicity of top slag with CaO is effective to prevent rephosphorization and resulphurization, and it is possible to dephosphorize and desulphurize and remove the inclusions from molten steel when basicity R of the top slag is adjusted to 2 0-3 10, and SiCaBa alloy is better than SiFe alloy in this relation.
基金Project(2013JM8024)Supported by Natural Science Basic Research Plan in Shaanxi Province of China
文摘For the characteristics of the continuous stirred-tank reactor(CSTR) with coil and jacket cooling system,a CSTR temperature dual control solution based on the analysis of the CSTR exothermic reaction control characteristic was proposed for an organic material polymerization production.The control solution has passive fault-tolerant ability for the jacket cooling water cutting off fault and active fault-tolerant potential for the coil cooling water cutting off fault,and it has good control ability,high saving energy and reducing consumption performance.Fault detection and diagnosis and fault-tolerant control strategy are designed for the coil cooling fault to achieve the active fault-tolerant control function.The CSTR temperature dual control,process fault detection and diagnosis and active fault-tolerant control were full integrated into the CSTR temperature fault-tolerant control system,which achieve fault tolerance control of CSTR temperature for any severe malfunction of jacket cooling or coil cooling cutting off,and the security for CSTR exothermic reaction is improved.Finally,the effectiveness of this system was validated by semi-physical simulation experiment.
基金financially supported by National Key R&D Program of China(No.2022YFB3805702)the State Key Program of National Natural Science Foundation of China(No.52130303)
文摘Photoisomerization-induced phase change are important for co-harvesting the latent heat and isomerization energy of azobenzene molecules.Chemically optimizing heat output and energy delivery at alternating temperatures are challenging because of the differences in crystallizability and isomerization.This article reports two series of asymmetrically alkyl-grafted azobenzene(Azo-g),with and without a methyl group,that have an optically triggered phase change.Three exothermic modes were designed to utilize crystallization enthalpy(△H_(c))and photothermal(isomerization)energy(△H_(p))at different temperatures determined by the crystallization.Azo-g has high heat output(275-303 J g^(-1))by synchronously releasing△H_(c)and△H_(p)over a wide temperature range(-79℃to 25℃).We fabricated a new distributed energy utilization and delivery system to realize a temperature increase of 6.6℃at a temperature of-8℃.The findings offer insight into selective utilization of latent heat and isomerization energy by molecular optimization of crystallization and isomerization processes.
基金King Saud University for funding this work through Researchers Supporting Project number (RSP-2020/133), King Saud University, Riyadh, Saudi Arabia。
文摘Herein,the interaction of a protein,bovine serum albumin(BSA),with tetradecyltrimethylammonium bromide(TTAB,a cationic surfactant),has been investigated using the conductivity measurement technique in pure water and some sodium salts(NaCl,Na_(2) SO_(4),Na_(2) CO_(3), and Na_(3) PO_(4)) solutions at temperature range of 295.15-320.15 K.Results reveal that,in the plot of specific conductivity versus the concentration of TTAB,only a single critical micelle concentration(cmc) was found for the TTAB+BSA mixed system in all solvents media studied.The addition of BSA in aqueous TTAB solution,the value of cmc undergoes a change from its pure form,which indicates the presence of strong interaction operating between the BSA and TTAB molecules.In aqueous system,the cmc values of the TTAB+BSA mixtures are obtained higher compared to the values found for single TTAB surfactant However,the addition of salt decreases the cmc value of mixed TTAB+BSA system.The values of cmc of the BSA+TTAB mixed system at 310.15 K and 1.00 mmol·kg^(-1) ionic strength of salt followed the order:cmc_(Na_(2) CO_(3))> Cmcc_(Na_(3) PO_(4))> cmcNaCl>cMC_(Na_(2) SO_(4)).The cmc values of TTAB+BSA mixture were found to be lowered in urea solution within the concentrations studied.The values of degree of dissociation(α) and fraction of counter ion binding(β) were found to be dependent on additives and temperature.The free energy of micellization(AGm) is negative for all the systems,which manifests that the micellization phenomenon is energetically spontaneous.The enhancement of the negative value of △G_(m)^(0) in aqueous salt solutions reveals an increase of spontaneity of the TTAB+BSA micellization process.The values of △G_(m)^(0) also reveal that the spontaneity of micelle formation is enhanced at higher temperatures in all media studied.The values of free energy of transfer(△G_(m,t)^(o)) were also determined for numerous solvent media used in the present study and described with appropriate reasoning.
文摘Based on the experiment and the thermodynamics analysis for CuO/Al system, it is founded that the compounding reaction of CuO/Al under low temperature is available. The general equation of adiabatic temperature of the system is set up, and the influence of resultant concentration and temperature on adiabatic temperature is theoretically analyzed. The values of heat effect of CuO/Al system under different temperature are also caculated.
基金supported by the Joint Funds of the National Natural Science Foundation of China(Grant No.U1530402)the National Natural Science Foundation of China(Grant No.11004163)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.2682014ZT31)the Department of Energy National Nuclear Security Administration(Grant No.DE-NA0001974)the Department of Energy Basic Energy Sciences(Grant Nos.DE-FG02-99ER45775and DE-AC02-06CH11357)
文摘Two kinds of glassy sulfurs are synthesized by thrapid compression method from liquid sulfur at temperatures below and above the X-transition point. The glassy sulfur has different colors and transparencies, depending on temperature, which may inherit some structural information from the transition. Raman spectrum studies of these samples show that a large fraction of polymeric chains exist in the glassy sulfur, even in the one solidified from T 〈 Tλ. We find that a higher compression rate instead of a higher temperature of the parent liquid captures more polymeric chains. Pressure-induced glassy sulfur presents high thermal stability compared with temperature quenched glassy sulfur and could transform into liquid sulfur directly without crystallization through an abnormal exothermic melting course. High energy x-ray diffraction is utilized to study the local order of the pressure-induced glassy sulfur.
基金Supported by the National Natural Science Foundation of China(21136003,21176089)the National Science&Technology Support Plan(2012BAK13B02)+2 种基金the National Major Basic Research Program(2014CB744306)the Natural Science Foundation Team Project of Guangdong Province(S2011030001366)the Fundamental Research Funds for Central Universities(2013ZP0010)
文摘Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computation. To facilitate the implementation of NMPC in batch processes, we propose a real-time updated model predictive control method based on state estimation. The method includes two strategies: a multiple model building strategy and a real-time model updated strategy. The multiple model building strategy is to produce a series of sim-plified models to reduce the on-line computational complexity of NMPC. The real-time model updated strategy is to update the simplified models to keep the accuracy of the models describing dynamic process behavior. The me-thod is validated with a typical batch reactor. Simulation studies show that the new method is efficient and robust with respect to model mismatch and changes in process parameters.
基金supported by the Key Basic Research Project of National Foundation Strengthening Program(No.2021-JCJQ-ZD-030-12)the National Natural Science Foundation of China(No.52171152).
文摘The present study focuses on investigating the microstructural evolutions and mechanical properties of energetic Al_(1)(TiZrNbTaMoCr)_(15) refractory high-entropy alloys with the different heat treatments at low Al content state. It is found that even with a reduction in the Al content, the strength of these alloys remains unaffected at room temperature and high temperature, while the plasticity improves significantly. In particular, the coherent BCC/B_(2) microstructure with needle-like B_(2) nanoprecipitates dispersed into the BCC matrix is formed in 873 K-aged Al_(1)Ti_(6)Zr_(2)Nb_(3)Ta_(3)Mo_(0.5)Cr_(0.5) alloy. Therefore, this alloy exhibits the highest compression yield strength (σ_(YS) = 1333 and 717 MPa) at room temperature and 1073 K, respectively. After 973 K-aged, the coherent BCC/B_(2) microstructure underwent destabilization, and the B_(2) phase transforms into the brittle Zr5Al3 phase which then coarsens and dominates the microstructure of S3-AlTa_(3) alloy after 1073 K-aged. Moreover, these current alloys exhibit exceptionally high theoretical exothermic enthalpy (ΔH), surpassing 11606 J·g^(−1), which highlights their significant potential as innovative high-performance energetic structural materials.
文摘Differential scanning calorimetry (DSC) provides easy screening for thermal hazard evaluation. Here, we investigate the difference between using glass and stainless-steel vessels on the DSC measurement of exothermic decomposition energy (QDSC) for 41 chemical substances (containing nitro, halogen, peroxide, and sulfur groups, and hydrazine bonds). Two borosilicate glass vessels (capillary and ampule) and one stainless-steel vessel were used. All QDSC values obtained were investigated with reference to the permissible fluctuation range specified by the ASTM (American Society for Testing and Materials) international Both glass vessels produced very similar QDSC values, despite different sample scales. The QDSC values obtained with the glass vessels were generally roughly within the variation tolerance range of the stainless-steel vessel. Notable exceptions were halogen- or sulfur-containing compounds;these exhibited smaller QDSC values with glass vessels in almost all cases. We will investigate whether certain structures in compounds react with stainless steel. The vessel material choice is crucial in evaluating the true reactivity of a substance.
文摘Cancer cells are irresponsive to the central control of the cell growth mechanisms. It is difficult to turn on the responsive mechanism of cancer cells because the cells are completely dissociated from the central command and on their own in terms of cell division and growth. Precisely, this is the reason why they are at risk to the health of humans and/or any biological entities. Instead of trying to reconnect the central command of the growth control mechanism to cancer cells that are already out of the range, we present a method for using the cancer cell’s own irresponsive and uncontrolled growth mechanism to their disadvantage and destroy the cancer cells. We found that this is achievable in an atomic/molecular level study of the glucose molecule, which is the primary food source used for growth and energy generation by all cells in the body, including cancer cells. Testimonials of the clinical trial of the supplement provide proof of dramatic recovery from the advanced stage of cancer in seven days.
