Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.E...Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.EC is also the most widely used electrolyte solvent in sodium ion batteries.However,compared to lithium metal,sodium metal(Na)shows higher activity and reacts violently with EC-based electrolyte(NaPF_(6)as solute),which leads to the failure of sodium metal batteries(SMBs).Herein,we reveal the electrochemical instability mechanism of EC on sodium metal battery,and find that the com-bination of EC and NaPF_(6) is electrically reduced in sodium metal anode during charging,resulting in the reduction of the first coulombic efficiency,and the continuous consumption of electrolyte leads to the cell failure.To address the above issues,an additive modified linear carbonate-based electrolyte is provided as a substitute for EC based electrolytes.Specifically,ethyl methyl carbonate(EMC)and dimethyl carbon-ate(DMC)as solvents and fluoroethylene carbonate(FEC)as SEI-forming additive have been identified as the optimal solvent for NaFP_(6)based electrolyte and used in Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))/Na batteries.The batter-ies exhibit excellent capacity retention rate of about 80%over 1000 cycles at a cut-off voltage of 4.3 V.展开更多
High-performance solid polymer electrolyte （SPE） has long been desired for the next-generation high energy density and safe rechargeable lithium batteries. A SPE composed of 80 wt% lithium bis（trifluo-romethanesulf...High-performance solid polymer electrolyte （SPE） has long been desired for the next-generation high energy density and safe rechargeable lithium batteries. A SPE composed of 80 wt% lithium bis（trifluo-romethanesulfonyl）imide （LiTFSI）, 20% poly（ethylene carbonate） （PEC） and a polyamide （PA） fiber membrane backbone was prepared by solution-casting method. This solid electrolyte exhibits quite high ionic conductivity and lithium ion transference number （t＋）, and excellent mechanical strength. The as-prepared solid electrolyte shows good wettability to porous electrodes during cycles, which is beneficial to form ionically conductive phase throughout porous electrodes. All-solid-state LiFePO4lLi cells assembled with the as-prepared solid electrolyte deliver a high initial discharge specific capacity of 125.7 mAh·g^-1 and good cycling stability at 55 ℃ （93.4% retention at 1C after 200 cycles）, and superior cycle performance. Outstanding electrochemical performance can be mainly ascribed to the improved ionic conductivity in the entire porous electrodes due to the good wettability of SPE.展开更多
At present,replacing the liquid electrolyte in a lithium metal battery with a solid electrolyte is considered to be one of the most powerful strategies to avoid potential safety hazards.Composite solid electrolytes(CP...At present,replacing the liquid electrolyte in a lithium metal battery with a solid electrolyte is considered to be one of the most powerful strategies to avoid potential safety hazards.Composite solid electrolytes(CPEs)have excellent ionic conductivity and flexibility owing to the combination of functional inorganic materials and polymer solid electrolytes(SPEs).Nevertheless,the ionic conductivity of CPEs is still lower than those of commercial liquid electrolytes,so the development of high-performance CPEs has important practical significance.Herein,a novel fast lithium-ion conductor material LiTa_(2)PO_(8) was first filled into poly(ethylene oxide)(PEO)-based SPE,and the optimal ionic conductivity was achieved by filling different concentrations(the ionic conductivity is 4.61×10^(-4)S/cm with a filling content of 15 wt%at 60℃).The enhancement in ionic conductivity is due to the improvement of PEO chain movement and the promotion of LiTFSI dissociation by LiTa_(2)PO_(8).In addition,LiTa_(2)PO_(8) also takes the key in enhancing the mechanical strength and thermal stability of CPEs.The assembled LiFePO_(4) solid-state lithium metal battery displays better rate performance(the specific capacities are as high as 157.3,152,142.6,105 and 53.1 mAh/g under0.1,0.2,0.5,1 and 2 C at 60℃,respectively)and higher cycle performance(the capacity retention rate is86.5%after 200 cycles at 0.5 C and 60℃).This research demonstrates the feasibility of LiTa_(2)PO_(8) as a filler to improve the performance of CPEs,which may provide a fresh platform for developing more advanced solid-state electrolytes.展开更多
The lithiated covalent organic framework(named TpPa-SO_(3) Li),which was prepared by a mild chemical lithiation strategy,was introduced in poly(ethylene oxide)(PEO)to produce the composite polymer electrolytes(CPEs).L...The lithiated covalent organic framework(named TpPa-SO_(3) Li),which was prepared by a mild chemical lithiation strategy,was introduced in poly(ethylene oxide)(PEO)to produce the composite polymer electrolytes(CPEs).Li-ion can transfer along the PEO chain or across the layer of TpPa-SO_(3) Li within the nanochannels,resulting in a high Li-ion conductivity of3.01×10^(-4)S/cm at 60℃.When the CPE with 0.75 wt.%TpPa-SO_(3) Li was used in the LiFePO_(4)‖Li solid-state battery,the cell delivered a stable capacity of 125 mA·h/g after 250 cycles at 0.5 C,60℃.In comparison,the cell using the CPE without TpPa-SO_(3) Li exhibited a capacity of only 118 mA·h/g.展开更多
The research of poly(ethylene oxide)(PEO)-based solid composite electrolyte with high ionic conductivity and excellent interfacial stability is the key to the development of all-solid-state lithium-ion batteries(ASSLI...The research of poly(ethylene oxide)(PEO)-based solid composite electrolyte with high ionic conductivity and excellent interfacial stability is the key to the development of all-solid-state lithium-ion batteries(ASSLIBs). Herein, uniform nanorod structured CeO_(2) fillers were controllably synthesized by electrospinning, which were subsequently filled into PEO polymer to prepare CeO_(2)/PEO solid composite electrolyte. The addition of CeO_(2) nanorods can reduce both the glass transition temperature and the melting point of PEO polymer, and also interact with PEO and lithium bis(trifluoromethanesulphonyl)imide(LITFSI) by Lewis acid—base reaction. Therefore, the solid composite electrolyte exhibits a high ionic conductivity of 4.52 × 10^(-4)S/cm, a wide electrochemical stability window of about 4.8 V, and a good interfacial stability with Li at 55℃. Moreover, the LiFePO_4/Li ASSLIB divulges the discharging specific capacity of 165, 162, 156 and 146 mA,h/g at 0.2, 0.5, 1 and 2 C, respectively, and achieves the capacity retention of 90.3% after 150 cycles at 0.5 C. Consequently, one dimensional CeO_(2) nanorods can be considered as an alternative filler for polymeric solid electrolyte.展开更多
Developing laminar composite solid electrolyte with ultrathin thickness and continuous conduction channels in vertical direction holds great promise for all-solid-state lithium batteries.Herein,a thin,laminar solid el...Developing laminar composite solid electrolyte with ultrathin thickness and continuous conduction channels in vertical direction holds great promise for all-solid-state lithium batteries.Herein,a thin,laminar solid electrolyte is synthesized by filtrating–NH 2 functionalized metal-organic framework nanosheets and then being threaded with poly(ethylene oxide)chains induced by the hydrogen-bonding interaction from–NH_(2) groups.It is demonstrated that the threaded poly(ethylene oxide)chains lock the adjacent metal-organic framework nanosheets,giving highly enhanced structural stability(Young’s modulus,1.3 GPa)to 7.5-μm-thick laminar composite solid electrolyte.Importantly,these poly(ethylene oxide)chains with stretching structure serve as continuous conduction pathways along the chains in pores.It makes the non-conduction laminar metal-organic framework electrolyte highly conductive:3.97×10^(−5) S cm^(−1) at 25℃,which is even over 25 times higher than that of pure poly(ethylene oxide)electrolyte.The assembled lithium cell,thus,acquires superior cycling stability,initial discharge capacity(148 mAh g^(−1) at 0.5 C and 60℃),and retention(94% after 150 cycles).Besides,the pore size of nanosheet is tailored(24.5–40.9˚A)to evaluate the mechanisms of chain conformation and ion transport in confined space.It shows that the confined pore only with proper size could facilitate the stretching of poly(ethylene oxide)chains,and meanwhile inhibit their disorder degree.Specifically,the pore size of 33.8˚A shows optimized confinement effect with trans-poly(ethylene oxide)and cis-poly(ethylene oxide)conformation,which offers great significance in ion conduction.Our design of poly(ethylene oxide)-threaded architecture provides a platform and paves a way to the rational design of next-generation high-performance porous electrolytes.展开更多
Non-aqueous lithium-oxygen （Li-O2） batteries have been considered as the superior energy storage system due to their high-energy density, however, some challenges limit the practical application of Li- O2 batteries....Non-aqueous lithium-oxygen （Li-O2） batteries have been considered as the superior energy storage system due to their high-energy density, however, some challenges limit the practical application of Li- O2 batteries. One of them is the lack of stable electrolyte. In this communication, a novel electrolyte with ethylene sulfite （ES） used as solvent for Li-O2 batteries was reported. ES solvent showed low volatility and high electrochemical stability. Without a catalyst in the air-electrode of Li-O2 batteries, the batteries showed high specific capacity, good round-trip efficiency and cycling stability.展开更多
A series of ethylene oxide-ethylene terephthalate segmented copolymers (EOET) weresynthesized and complexed with LiClO_4 to form some new polymer electrolytes. The EOET-LiClO_4 electrolytes exhibit not only high ionic...A series of ethylene oxide-ethylene terephthalate segmented copolymers (EOET) weresynthesized and complexed with LiClO_4 to form some new polymer electrolytes. The EOET-LiClO_4 electrolytes exhibit not only high ionic conductivity, but also good mechanical strengthand toughness. The EOET 3400--25--LiClO_4 complex possesses the highest conductivity (4. 65×10^(-5)s·cm^(-1) at room temperature when the ratio [Li^+]/[EO] equals 1/16. The structures of these electrolytes were examined with FTIR analysis, X-ray diffractionand DSC thermograms, and the results of high ionic conductivity of the segmented copolymerswere discussed.展开更多
Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performa...Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.展开更多
In order to recover propylene carbonate(PC)from waste lithium-ion battery electrolyte,the electrolyte was coupled with dimethyl succinate(DMSu)to prepare degradable polyester PPS.To further enhance the performance of ...In order to recover propylene carbonate(PC)from waste lithium-ion battery electrolyte,the electrolyte was coupled with dimethyl succinate(DMSu)to prepare degradable polyester PPS.To further enhance the performance of PPS,ethylene glycol(EG)was introduced to prepare copolyester PPSG,and the effects of the amount of added EG on the performance of copolyester were explored.The results show that the synthesized polyester was the target product.With the increase in the amount of added EG,the molecular weight of the copolyester gradually rose,but the glass transition temperature(T g)of PPSG gradually decreased,and the degradation rate was significantly faster than that of PPS.Within 24 d,the mass loss rate of PPSG-30%reached 75.8%.展开更多
Low ionic conductivity is a major obstacle for polymer solid-state electrolytes.In response to this issue,a design concept of enhanced regional electric potential difference(EREPD)is proposed to modulate the interacti...Low ionic conductivity is a major obstacle for polymer solid-state electrolytes.In response to this issue,a design concept of enhanced regional electric potential difference(EREPD)is proposed to modulate the interaction of nanofillers with other components in the composite polymer solid-state electrolytes(CPSEs).While ensuring the periodic structure of the graphdiyne(GDY)backbone,methoxysubstituted GDY(OGDY)is prepared by an asymmetric substitution strategy,which increases the electric potential differences within each repeating unit of GDY.The staggered distributed electron-rich regions and electron-deficient regions on the two-dimensional plane of OGDY increase the free Li^(+)concentration through Lewis acid-base pair interaction.The adjacent ERRs and EDRs form uniformly distributed EREPDs,creating a continuous potential gradient that synergistically facilitates the efficient migration of Li^(+).Impressively,the OGDY/poly(ethylene oxide)(PEO)exhibits a high ionic conductivity(1.1×10^(-3)S cm^(−1))and ion mobility number(0.71).In addition,the accelerated Li^(+)migration promotes the formation of uniform and dense SEI layers and inhibits the growth of lithium dendrites.As a proof of concept,Li||Li symmetric cell and Li||LiFePO_(4)full cell and pouch cell assembled with OGDY/PEO exhibit good performance,highlighting the effectiveness of our EREPD design strategy for improving CPSEs performance.展开更多
Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport i...Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport is intriguing.However,this is hindered by low ionic conductivity of chloride SPEs and poor cycling performance of CIBs.Herein,an in-situ polymerized and cross-linked poly(ethylene gly-col)diacrylate-based chloride SPE with a low plasticizer content of succinonitrile is designed,yielding a room-temperature ionic conductivity of 7.6×10^(−5) S cm^(−1),which is higher than that of previously re-ported SPEs for CIBs.Moreover,the use of the asprepared SPE achieves an integrated organic cathode with significantly enhanced rate performance and capacity retention of 96.1%after 100 cycles at room temperature,which is much higher than 49.9%(80 cycles)of the cathode in the CIB with a sandwiched structure.These improved properties are also superior to that of other reported cathodes coupled with different chloride SPEs.The chloride ion transfer mechanism of the cathode is revealed by X-ray photo-electron spectroscopy and energy dispersive spectroscopy.展开更多
Poly(ethylene oxide)(PEO)and its derivatives based gel polymer electrolytes(GPEs)are severely limited in advanced and safe lithium-ion batteries(LIBs)owing to the intrinsically high flammability of liquid electrolytes...Poly(ethylene oxide)(PEO)and its derivatives based gel polymer electrolytes(GPEs)are severely limited in advanced and safe lithium-ion batteries(LIBs)owing to the intrinsically high flammability of liquid electrolytes and PEO.Directly adding flame retardants to the GPEs can suppress their flammability and thus improve the safety of LIBs,but results in deteriorative electrochemical performance.Herein,a novel GPE with chemically bonded flame retardant(i.e.diethyl vinylphosphonate)in cross-linked polyethylene glycol diacrylate matrix,featuring both high-safety and high-performance,is designed.This as-prepared GPE storing the commercial 1 mol L^(-1) LiPF6 electrolyte resists high temperature of 200℃and cannot be ignited as well as possesses a high ionic conductivity(0.60 m S cm^(-1))and good compatibility with lithium.Notably,the LiFePO_(4)/Li battery with this GPE delivers a satisfactory capacity of 142.2 m A h g^(-1) and a superior cycling performance with a capacity retention of 96.3%and a coulombic efficiency of close to 100%for 350 cycles at 0.2 C under ambient temperature.Furthermore,the battery can achieve steady charge–discharge for 100 cycles with a coulombic efficiency of 99.5%at 1 C under 80℃and run normally even at a high temperature of 150℃or under the exposure to butane flame.Differential scanning calorimetry manifests significantly improved battery safety compared to commercial battery systems.This work provides a new pathway for developing next-generation advanced LIBs with enhanced performance and high safety.展开更多
Nowadays,lithium-ion capacitors(LICs) have become a type of important electrochemical energy storage devices due to their high power and long cycle life characteristics with fast response time.As one of the essential ...Nowadays,lithium-ion capacitors(LICs) have become a type of important electrochemical energy storage devices due to their high power and long cycle life characteristics with fast response time.As one of the essential components of LICs,the electrolytes not only provide the anions and cations required during charge and discharge processes,but also supply the liquid environment for ions to migrate between anodes and cathodes in LIC cells.It is well accepted that propylene carbonate(PC) cannot be used as a single solvent for Li-ion electrolyte due to the failure to form stable SEI film on graphite surface.In this work,the compatibility of PC-based electrolyte with commercial soft carbon anode and activated carbon cathode has been validated by using the laminated pouch LIC cells.The effects of additives on the electrochemical properties of PC-based LICs have been systematically investigated.Ethylene sulfite(ES) was proved to be an effective additive to promote capacity retention at high C-rate,which is superior to vinylene carbonate and fluoroethylene carbonate.The addition of 5 wt% ES plays an important role in reducing internal resistance,as well as improving electrochemical stability and low-temperature performances.This study is expected to be beneficial to explore robust electrolyte/additive combinations for LICs to reduce the internal resistance and to improve the lowtemperature performances.展开更多
Conventional lithium-ion batteries(LIBs)with liquid electrolytes are challenged by their big safety concerns,particularly used in electric vehicles.All-solid-state batteries using solid-state electrolytes have been pr...Conventional lithium-ion batteries(LIBs)with liquid electrolytes are challenged by their big safety concerns,particularly used in electric vehicles.All-solid-state batteries using solid-state electrolytes have been proposed to significantly improve safety yet are impeded by poor interfacial solid–solid contact and fast interface degradation.As a compromising strategy,in situ solidification has been proposed in recent years to fabricate quasi-solid-state batteries,which have great advantages in constructing intimate interfaces and cost-effective mass manufacturing.In this work,quasi-solid-state pouch cells with high loading electrodes(≥3 m Ah cm^(-2))were fabricated via in situ solidification of poly(ethylene glycol)diacrylate-based polymer electrolytes(PEGDA-PEs).Both single-layer and multilayer quasi-solid-state pouch cells(2.0 Ah)have demonstrated stable electrochemical performance over500 cycles.The superb electrochemical stability is closely related to the formation of robust and compatible interphase,which successfully inhibits interfacial side reactions and prevents interfacial structural degradation.This work demonstrates that in situ solidification is a facile and cost-effective approach to fabricate quasi-solid-state pouch cells with both excellent electrochemical performance and safety.展开更多
With the booming development of lithium-ion batteries,safety has become one of the most primary focuses of current researches.Although there are various approaches to enhance the safety of lithiumion batteries,phospha...With the booming development of lithium-ion batteries,safety has become one of the most primary focuses of current researches.Although there are various approaches to enhance the safety of lithiumion batteries,phosphate-based electrolyte holds the greatest potential for practical application due to their non-flammability.Nonetheless,its compatibility issue with the graphite anode remains a significant obstacle to its widespread use.Herein,an effective method is proposed to improve the compatibility of electrolyte with graphite(Gr)anode by rationally adjusting the proportion of lithium salt and solvent components to optimize the Li^(+)solvation structure.By slightly increasing the Li^(+)/triethyl phosphate(TEP)ratio,TEP alone cannot fully occupy the inner solvation sheath and therefore less polar ethylene carbonate(EC)has to be recruited,and the solvation structure gradually changes from Li^(+)–[TEP]_(4)to Li^(+)–[TEP]_(3)[EC]with the coexistence of EC and TEP.Simultaneously,EC molecules in the Li^(+)–[TEP]_(3)[EC]could be preferentially reduced on graphite compared to the TEP molecules,resulting in the formation of a uniform and durable solid-electrolyte interphase(SEI)layer.Benefiting from the optimized phosphate-based electrolyte,the Gr|Li battery exhibits a capacity retention rate of 96.8%after stable cycling at 0.5 C for 470 cycles which shows a longer cycle life than the battery with carbonate electrolyte(cycling at 0.5 C for 450 cycles).Therefore,this work provides the guidance for designing a non-flammable phosphate-based electrolyte for high-safety and long cycling-life lithium-ion batteries.展开更多
Ethylene carbonate(EC)is an important electrolyte used in lithium-ion batteries due to its excellent electrochemical performance.However,propylene carbonate(PC)differs from EC by only one methyl substituent and exhibi...Ethylene carbonate(EC)is an important electrolyte used in lithium-ion batteries due to its excellent electrochemical performance.However,propylene carbonate(PC)differs from EC by only one methyl substituent and exhibits markedly poorproperties.The EC-PC disparity is still poorly understood at the molecular level.In this study,we demonstrated that femtosecond broadband sum frequency generation vibrational spectroscopy(SFG-VS)with simultaneous measurement of multiple polarization combinations provides a powerful probe for investigating the physicochemical processes at the electrode-electrolyte interface during the charge-discharge cycles of lithium batteries.Using monolayer graphene as the working electrode,we observed the distinct reaction outcomes of EC and PC on the electrode surface.The interfacial reaction of EC occurred only in the first charge-discharge cycle,while the interfacial reaction of PC was ongoing along with the charge-discharge cycles,which explains why EC is a better electrolyte choice than PC.This study provides direct experimental evidence in elucidating the differences in interfacial performance between EC and PC,facilitating a deeper understanding of battery interface reactions and guiding the design of high-performance lithium-ion batteries.展开更多
Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal pl...Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.展开更多
Poly(ethylene oxide)(PEO)polymer electrolytes(PEs)have been commercially applied in LiFePO_(4)||Li solid-state lithium batteries(SSLBs).However,it remains challenging to develop PEO-based PEs applicable to the high-vo...Poly(ethylene oxide)(PEO)polymer electrolytes(PEs)have been commercially applied in LiFePO_(4)||Li solid-state lithium batteries(SSLBs).However,it remains challenging to develop PEO-based PEs applicable to the high-voltage SSLBs with higher energy density,owing to the poor electrochemical stability of PEO.Herein,we report a scalable strategy for fabricating PEO-based PEs with high-voltage compatibility,by exploiting a new mechanism to stabilize the cathode-electrolyte interface in the highvoltage SSLBs.The protocol only involves a one-pot synthesis procedure to covalently crosslink the PEO chains,in the presence of high-content lithium bis(trifluoromethylsulphonyl)imide(LiTFSI)salts and N,N-dimethylformamide(DMF).LiTFSI-DMF supramolecular aggregates are formed and firmly embedded in the polymer network,endowing the PE with high room-temperature ionic conductivity.The dissociated and highly concentrated TFSI^-anions can enter the Helmholtz layer close to the high-voltage cathode,leading to the formation of a thin and homogeneous cathode electrolyte interface(CEI),mainly composed of LiF,on the cathode.The CEI with high electrochemical stability can effectively stabilize the cathode-electrolyte interface,enabling long-term stable cycling of the high-voltage LiCoO_(2)||Li and nickelrich NCM_(622)||Li batteries at room temperature.The simplicity and scalability of the strategy makes the reported PEO-based PE potentially applicable in high-voltage SSLBs in practice.展开更多
基金supported by the National Natural Science Foundation of China(52172201,51732005,51902118,and 52102249)the China Postdoctoral Science Foundation(2019M662609and 2020T130217)for financial support。
文摘Ethylene carbonate(EC)is widely used in lithium-ion batteries due to its optimal overall performance with satisfactory conductivity,relatively stable solid electrolyte interphase(SEI),and wide electrochemical window.EC is also the most widely used electrolyte solvent in sodium ion batteries.However,compared to lithium metal,sodium metal(Na)shows higher activity and reacts violently with EC-based electrolyte(NaPF_(6)as solute),which leads to the failure of sodium metal batteries(SMBs).Herein,we reveal the electrochemical instability mechanism of EC on sodium metal battery,and find that the com-bination of EC and NaPF_(6) is electrically reduced in sodium metal anode during charging,resulting in the reduction of the first coulombic efficiency,and the continuous consumption of electrolyte leads to the cell failure.To address the above issues,an additive modified linear carbonate-based electrolyte is provided as a substitute for EC based electrolytes.Specifically,ethyl methyl carbonate(EMC)and dimethyl carbon-ate(DMC)as solvents and fluoroethylene carbonate(FEC)as SEI-forming additive have been identified as the optimal solvent for NaFP_(6)based electrolyte and used in Na_(4)Fe_(3)(PO_(4))_(2)(P_(2)O_(7))/Na batteries.The batter-ies exhibit excellent capacity retention rate of about 80%over 1000 cycles at a cut-off voltage of 4.3 V.
基金financially supported by the National Natural Scientific Foundation of China(No.51532002)Beijing Natural Science Foundation(No.L172023)the National Basic Research Program of China(No.2015CB932500)
文摘High-performance solid polymer electrolyte （SPE） has long been desired for the next-generation high energy density and safe rechargeable lithium batteries. A SPE composed of 80 wt% lithium bis（trifluo-romethanesulfonyl）imide （LiTFSI）, 20% poly（ethylene carbonate） （PEC） and a polyamide （PA） fiber membrane backbone was prepared by solution-casting method. This solid electrolyte exhibits quite high ionic conductivity and lithium ion transference number （t＋）, and excellent mechanical strength. The as-prepared solid electrolyte shows good wettability to porous electrodes during cycles, which is beneficial to form ionically conductive phase throughout porous electrodes. All-solid-state LiFePO4lLi cells assembled with the as-prepared solid electrolyte deliver a high initial discharge specific capacity of 125.7 mAh·g^-1 and good cycling stability at 55 ℃ （93.4% retention at 1C after 200 cycles）, and superior cycle performance. Outstanding electrochemical performance can be mainly ascribed to the improved ionic conductivity in the entire porous electrodes due to the good wettability of SPE.
基金supported by the National Natural Science Foundation of China(NSFC,Nos.52073212,51772205,51772208)the General Program of Municipal Natural Science Foundation of Tianjin(Nos.17JCYBJC17000,17JCYBJC22700)。
文摘At present,replacing the liquid electrolyte in a lithium metal battery with a solid electrolyte is considered to be one of the most powerful strategies to avoid potential safety hazards.Composite solid electrolytes(CPEs)have excellent ionic conductivity and flexibility owing to the combination of functional inorganic materials and polymer solid electrolytes(SPEs).Nevertheless,the ionic conductivity of CPEs is still lower than those of commercial liquid electrolytes,so the development of high-performance CPEs has important practical significance.Herein,a novel fast lithium-ion conductor material LiTa_(2)PO_(8) was first filled into poly(ethylene oxide)(PEO)-based SPE,and the optimal ionic conductivity was achieved by filling different concentrations(the ionic conductivity is 4.61×10^(-4)S/cm with a filling content of 15 wt%at 60℃).The enhancement in ionic conductivity is due to the improvement of PEO chain movement and the promotion of LiTFSI dissociation by LiTa_(2)PO_(8).In addition,LiTa_(2)PO_(8) also takes the key in enhancing the mechanical strength and thermal stability of CPEs.The assembled LiFePO_(4) solid-state lithium metal battery displays better rate performance(the specific capacities are as high as 157.3,152,142.6,105 and 53.1 mAh/g under0.1,0.2,0.5,1 and 2 C at 60℃,respectively)and higher cycle performance(the capacity retention rate is86.5%after 200 cycles at 0.5 C and 60℃).This research demonstrates the feasibility of LiTa_(2)PO_(8) as a filler to improve the performance of CPEs,which may provide a fresh platform for developing more advanced solid-state electrolytes.
基金supported by the State Key Laboratory of Catalytic Materials and Reaction Engineering(RIPP,SINOPEC)the National Natural Science Foundation of China(Nos.21878216,22005215)+1 种基金Hebei Province Innovation Ability Promotion Project(No.20312201D)the National Key Research and Development Program of China(No.2019YFE0118800)。
文摘The lithiated covalent organic framework(named TpPa-SO_(3) Li),which was prepared by a mild chemical lithiation strategy,was introduced in poly(ethylene oxide)(PEO)to produce the composite polymer electrolytes(CPEs).Li-ion can transfer along the PEO chain or across the layer of TpPa-SO_(3) Li within the nanochannels,resulting in a high Li-ion conductivity of3.01×10^(-4)S/cm at 60℃.When the CPE with 0.75 wt.%TpPa-SO_(3) Li was used in the LiFePO_(4)‖Li solid-state battery,the cell delivered a stable capacity of 125 mA·h/g after 250 cycles at 0.5 C,60℃.In comparison,the cell using the CPE without TpPa-SO_(3) Li exhibited a capacity of only 118 mA·h/g.
基金Project supported by the Education Department of Henan Province(22A170017)the Science and Technology Department of Henan Province(232102240011)+1 种基金Henan Institute of Science and Technology(2016034)National College Students'Innovation and Entrepreneurship Training Program(202211071012)。
文摘The research of poly(ethylene oxide)(PEO)-based solid composite electrolyte with high ionic conductivity and excellent interfacial stability is the key to the development of all-solid-state lithium-ion batteries(ASSLIBs). Herein, uniform nanorod structured CeO_(2) fillers were controllably synthesized by electrospinning, which were subsequently filled into PEO polymer to prepare CeO_(2)/PEO solid composite electrolyte. The addition of CeO_(2) nanorods can reduce both the glass transition temperature and the melting point of PEO polymer, and also interact with PEO and lithium bis(trifluoromethanesulphonyl)imide(LITFSI) by Lewis acid—base reaction. Therefore, the solid composite electrolyte exhibits a high ionic conductivity of 4.52 × 10^(-4)S/cm, a wide electrochemical stability window of about 4.8 V, and a good interfacial stability with Li at 55℃. Moreover, the LiFePO_4/Li ASSLIB divulges the discharging specific capacity of 165, 162, 156 and 146 mA,h/g at 0.2, 0.5, 1 and 2 C, respectively, and achieves the capacity retention of 90.3% after 150 cycles at 0.5 C. Consequently, one dimensional CeO_(2) nanorods can be considered as an alternative filler for polymeric solid electrolyte.
基金The authors would like to acknowledge the financial support from National Nat-ural Science Foundation of China (U2004199)Excellent Youth Foundation of Henan Province (202300410373)+2 种基金China Postdoctoral Science Foundation (2021T140615 and 2020M672281)Natural Science Foundation of Henan Province (212300410285)Young Talent Support Project of Henan Province(2021HYTP028).
文摘Developing laminar composite solid electrolyte with ultrathin thickness and continuous conduction channels in vertical direction holds great promise for all-solid-state lithium batteries.Herein,a thin,laminar solid electrolyte is synthesized by filtrating–NH 2 functionalized metal-organic framework nanosheets and then being threaded with poly(ethylene oxide)chains induced by the hydrogen-bonding interaction from–NH_(2) groups.It is demonstrated that the threaded poly(ethylene oxide)chains lock the adjacent metal-organic framework nanosheets,giving highly enhanced structural stability(Young’s modulus,1.3 GPa)to 7.5-μm-thick laminar composite solid electrolyte.Importantly,these poly(ethylene oxide)chains with stretching structure serve as continuous conduction pathways along the chains in pores.It makes the non-conduction laminar metal-organic framework electrolyte highly conductive:3.97×10^(−5) S cm^(−1) at 25℃,which is even over 25 times higher than that of pure poly(ethylene oxide)electrolyte.The assembled lithium cell,thus,acquires superior cycling stability,initial discharge capacity(148 mAh g^(−1) at 0.5 C and 60℃),and retention(94% after 150 cycles).Besides,the pore size of nanosheet is tailored(24.5–40.9˚A)to evaluate the mechanisms of chain conformation and ion transport in confined space.It shows that the confined pore only with proper size could facilitate the stretching of poly(ethylene oxide)chains,and meanwhile inhibit their disorder degree.Specifically,the pore size of 33.8˚A shows optimized confinement effect with trans-poly(ethylene oxide)and cis-poly(ethylene oxide)conformation,which offers great significance in ion conduction.Our design of poly(ethylene oxide)-threaded architecture provides a platform and paves a way to the rational design of next-generation high-performance porous electrolytes.
基金supported by the National Key Basic Research Program of China (No. 2014CB932303)the National Natural Science Foundation of China (No. 21573145)
文摘Non-aqueous lithium-oxygen （Li-O2） batteries have been considered as the superior energy storage system due to their high-energy density, however, some challenges limit the practical application of Li- O2 batteries. One of them is the lack of stable electrolyte. In this communication, a novel electrolyte with ethylene sulfite （ES） used as solvent for Li-O2 batteries was reported. ES solvent showed low volatility and high electrochemical stability. Without a catalyst in the air-electrode of Li-O2 batteries, the batteries showed high specific capacity, good round-trip efficiency and cycling stability.
文摘A series of ethylene oxide-ethylene terephthalate segmented copolymers (EOET) weresynthesized and complexed with LiClO_4 to form some new polymer electrolytes. The EOET-LiClO_4 electrolytes exhibit not only high ionic conductivity, but also good mechanical strengthand toughness. The EOET 3400--25--LiClO_4 complex possesses the highest conductivity (4. 65×10^(-5)s·cm^(-1) at room temperature when the ratio [Li^+]/[EO] equals 1/16. The structures of these electrolytes were examined with FTIR analysis, X-ray diffractionand DSC thermograms, and the results of high ionic conductivity of the segmented copolymerswere discussed.
基金support of the Fundamental Research Funds for the Central Universities(No.2022CDJQY-004)the Fund for Innovative Research Groups of Natural Science Foundation of Hebei Province(No.A2020202002).
文摘Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.
文摘In order to recover propylene carbonate(PC)from waste lithium-ion battery electrolyte,the electrolyte was coupled with dimethyl succinate(DMSu)to prepare degradable polyester PPS.To further enhance the performance of PPS,ethylene glycol(EG)was introduced to prepare copolyester PPSG,and the effects of the amount of added EG on the performance of copolyester were explored.The results show that the synthesized polyester was the target product.With the increase in the amount of added EG,the molecular weight of the copolyester gradually rose,but the glass transition temperature(T g)of PPSG gradually decreased,and the degradation rate was significantly faster than that of PPS.Within 24 d,the mass loss rate of PPSG-30%reached 75.8%.
基金supported by the National Key Research and Development Project of China(2022YFA1204500,2022YFA1204503,2018YFA0703501)the National Natural Science Foundation of China(22275115,21875274,11704024)+4 种基金the Natural Science Foundation of Shandong Province(ZR2024ZD02)Natural Science Foundation of Hebei Province(B2020201006)Hebei Province Innovation Capability Enhancement Plan Project(22567620H)Young Scholarship Funding of Shandong University.Post-graduate Innovation Fund Project of Open Laboratory Project Fund of Hebei University(HBU2025SS010)Basic Research Project of Shandong University-Xin’an Group Silicon-Based High-End New Materials Institute.
文摘Low ionic conductivity is a major obstacle for polymer solid-state electrolytes.In response to this issue,a design concept of enhanced regional electric potential difference(EREPD)is proposed to modulate the interaction of nanofillers with other components in the composite polymer solid-state electrolytes(CPSEs).While ensuring the periodic structure of the graphdiyne(GDY)backbone,methoxysubstituted GDY(OGDY)is prepared by an asymmetric substitution strategy,which increases the electric potential differences within each repeating unit of GDY.The staggered distributed electron-rich regions and electron-deficient regions on the two-dimensional plane of OGDY increase the free Li^(+)concentration through Lewis acid-base pair interaction.The adjacent ERRs and EDRs form uniformly distributed EREPDs,creating a continuous potential gradient that synergistically facilitates the efficient migration of Li^(+).Impressively,the OGDY/poly(ethylene oxide)(PEO)exhibits a high ionic conductivity(1.1×10^(-3)S cm^(−1))and ion mobility number(0.71).In addition,the accelerated Li^(+)migration promotes the formation of uniform and dense SEI layers and inhibits the growth of lithium dendrites.As a proof of concept,Li||Li symmetric cell and Li||LiFePO_(4)full cell and pouch cell assembled with OGDY/PEO exhibit good performance,highlighting the effectiveness of our EREPD design strategy for improving CPSEs performance.
基金supported by the National Natural Science Foundation of China(No.52222211)“333”Project of Jiangsu Province,and the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport is intriguing.However,this is hindered by low ionic conductivity of chloride SPEs and poor cycling performance of CIBs.Herein,an in-situ polymerized and cross-linked poly(ethylene gly-col)diacrylate-based chloride SPE with a low plasticizer content of succinonitrile is designed,yielding a room-temperature ionic conductivity of 7.6×10^(−5) S cm^(−1),which is higher than that of previously re-ported SPEs for CIBs.Moreover,the use of the asprepared SPE achieves an integrated organic cathode with significantly enhanced rate performance and capacity retention of 96.1%after 100 cycles at room temperature,which is much higher than 49.9%(80 cycles)of the cathode in the CIB with a sandwiched structure.These improved properties are also superior to that of other reported cathodes coupled with different chloride SPEs.The chloride ion transfer mechanism of the cathode is revealed by X-ray photo-electron spectroscopy and energy dispersive spectroscopy.
基金supported by the National Natural Science Foundation of China(51773134)the Sichuan Science and Technology Program(2019YFH0112)the Fundamental Research Funds for the Central Universities。
文摘Poly(ethylene oxide)(PEO)and its derivatives based gel polymer electrolytes(GPEs)are severely limited in advanced and safe lithium-ion batteries(LIBs)owing to the intrinsically high flammability of liquid electrolytes and PEO.Directly adding flame retardants to the GPEs can suppress their flammability and thus improve the safety of LIBs,but results in deteriorative electrochemical performance.Herein,a novel GPE with chemically bonded flame retardant(i.e.diethyl vinylphosphonate)in cross-linked polyethylene glycol diacrylate matrix,featuring both high-safety and high-performance,is designed.This as-prepared GPE storing the commercial 1 mol L^(-1) LiPF6 electrolyte resists high temperature of 200℃and cannot be ignited as well as possesses a high ionic conductivity(0.60 m S cm^(-1))and good compatibility with lithium.Notably,the LiFePO_(4)/Li battery with this GPE delivers a satisfactory capacity of 142.2 m A h g^(-1) and a superior cycling performance with a capacity retention of 96.3%and a coulombic efficiency of close to 100%for 350 cycles at 0.2 C under ambient temperature.Furthermore,the battery can achieve steady charge–discharge for 100 cycles with a coulombic efficiency of 99.5%at 1 C under 80℃and run normally even at a high temperature of 150℃or under the exposure to butane flame.Differential scanning calorimetry manifests significantly improved battery safety compared to commercial battery systems.This work provides a new pathway for developing next-generation advanced LIBs with enhanced performance and high safety.
基金the National Natural Science Foundation of China(Nos.52077207,51822706,51777200 and 51772127)Beijing Natural Science Foundation(No.JQ19012)Dalian National Laboratory for Clean Energy Cooperation Fund,the CAS(No.DNL201912)。
文摘Nowadays,lithium-ion capacitors(LICs) have become a type of important electrochemical energy storage devices due to their high power and long cycle life characteristics with fast response time.As one of the essential components of LICs,the electrolytes not only provide the anions and cations required during charge and discharge processes,but also supply the liquid environment for ions to migrate between anodes and cathodes in LIC cells.It is well accepted that propylene carbonate(PC) cannot be used as a single solvent for Li-ion electrolyte due to the failure to form stable SEI film on graphite surface.In this work,the compatibility of PC-based electrolyte with commercial soft carbon anode and activated carbon cathode has been validated by using the laminated pouch LIC cells.The effects of additives on the electrochemical properties of PC-based LICs have been systematically investigated.Ethylene sulfite(ES) was proved to be an effective additive to promote capacity retention at high C-rate,which is superior to vinylene carbonate and fluoroethylene carbonate.The addition of 5 wt% ES plays an important role in reducing internal resistance,as well as improving electrochemical stability and low-temperature performances.This study is expected to be beneficial to explore robust electrolyte/additive combinations for LICs to reduce the internal resistance and to improve the lowtemperature performances.
基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC),Canada Research Chair Program(CRC),Canada Foundation for Innovation(CFI),Ontario Research Fund(ORF),China Automotive Battery Research Institute Co.,Ltd.,Glabat Solid-State Battery Inc.,Canada Light Source(CLS)at the University of Saskatchewan,Interdisciplinary Development Initiatives(IDI)by Western University,and University of Western Ontariothe support from Mitacs Accelerate Program(IT13735)the funding support from Banting Postdoctoral Fel owship(BPF—180162)
文摘Conventional lithium-ion batteries(LIBs)with liquid electrolytes are challenged by their big safety concerns,particularly used in electric vehicles.All-solid-state batteries using solid-state electrolytes have been proposed to significantly improve safety yet are impeded by poor interfacial solid–solid contact and fast interface degradation.As a compromising strategy,in situ solidification has been proposed in recent years to fabricate quasi-solid-state batteries,which have great advantages in constructing intimate interfaces and cost-effective mass manufacturing.In this work,quasi-solid-state pouch cells with high loading electrodes(≥3 m Ah cm^(-2))were fabricated via in situ solidification of poly(ethylene glycol)diacrylate-based polymer electrolytes(PEGDA-PEs).Both single-layer and multilayer quasi-solid-state pouch cells(2.0 Ah)have demonstrated stable electrochemical performance over500 cycles.The superb electrochemical stability is closely related to the formation of robust and compatible interphase,which successfully inhibits interfacial side reactions and prevents interfacial structural degradation.This work demonstrates that in situ solidification is a facile and cost-effective approach to fabricate quasi-solid-state pouch cells with both excellent electrochemical performance and safety.
基金the National Natural Science Foundation of China(52034011 and 52101278)the Central South University Research Programme of Advanced Interdisciplinary Studies(2023QYJC005)the Fundamental Research Funds for Central Universities of the Central South University(2022ZZTS0405)。
文摘With the booming development of lithium-ion batteries,safety has become one of the most primary focuses of current researches.Although there are various approaches to enhance the safety of lithiumion batteries,phosphate-based electrolyte holds the greatest potential for practical application due to their non-flammability.Nonetheless,its compatibility issue with the graphite anode remains a significant obstacle to its widespread use.Herein,an effective method is proposed to improve the compatibility of electrolyte with graphite(Gr)anode by rationally adjusting the proportion of lithium salt and solvent components to optimize the Li^(+)solvation structure.By slightly increasing the Li^(+)/triethyl phosphate(TEP)ratio,TEP alone cannot fully occupy the inner solvation sheath and therefore less polar ethylene carbonate(EC)has to be recruited,and the solvation structure gradually changes from Li^(+)–[TEP]_(4)to Li^(+)–[TEP]_(3)[EC]with the coexistence of EC and TEP.Simultaneously,EC molecules in the Li^(+)–[TEP]_(3)[EC]could be preferentially reduced on graphite compared to the TEP molecules,resulting in the formation of a uniform and durable solid-electrolyte interphase(SEI)layer.Benefiting from the optimized phosphate-based electrolyte,the Gr|Li battery exhibits a capacity retention rate of 96.8%after stable cycling at 0.5 C for 470 cycles which shows a longer cycle life than the battery with carbonate electrolyte(cycling at 0.5 C for 450 cycles).Therefore,this work provides the guidance for designing a non-flammable phosphate-based electrolyte for high-safety and long cycling-life lithium-ion batteries.
基金supported by the National Natural Science Foundation of China(No.21925302)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0450202).
文摘Ethylene carbonate(EC)is an important electrolyte used in lithium-ion batteries due to its excellent electrochemical performance.However,propylene carbonate(PC)differs from EC by only one methyl substituent and exhibits markedly poorproperties.The EC-PC disparity is still poorly understood at the molecular level.In this study,we demonstrated that femtosecond broadband sum frequency generation vibrational spectroscopy(SFG-VS)with simultaneous measurement of multiple polarization combinations provides a powerful probe for investigating the physicochemical processes at the electrode-electrolyte interface during the charge-discharge cycles of lithium batteries.Using monolayer graphene as the working electrode,we observed the distinct reaction outcomes of EC and PC on the electrode surface.The interfacial reaction of EC occurred only in the first charge-discharge cycle,while the interfacial reaction of PC was ongoing along with the charge-discharge cycles,which explains why EC is a better electrolyte choice than PC.This study provides direct experimental evidence in elucidating the differences in interfacial performance between EC and PC,facilitating a deeper understanding of battery interface reactions and guiding the design of high-performance lithium-ion batteries.
文摘Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.
基金the National Key R&D Program of China(No.2018YFC1105401)for the financial support。
文摘Poly(ethylene oxide)(PEO)polymer electrolytes(PEs)have been commercially applied in LiFePO_(4)||Li solid-state lithium batteries(SSLBs).However,it remains challenging to develop PEO-based PEs applicable to the high-voltage SSLBs with higher energy density,owing to the poor electrochemical stability of PEO.Herein,we report a scalable strategy for fabricating PEO-based PEs with high-voltage compatibility,by exploiting a new mechanism to stabilize the cathode-electrolyte interface in the highvoltage SSLBs.The protocol only involves a one-pot synthesis procedure to covalently crosslink the PEO chains,in the presence of high-content lithium bis(trifluoromethylsulphonyl)imide(LiTFSI)salts and N,N-dimethylformamide(DMF).LiTFSI-DMF supramolecular aggregates are formed and firmly embedded in the polymer network,endowing the PE with high room-temperature ionic conductivity.The dissociated and highly concentrated TFSI^-anions can enter the Helmholtz layer close to the high-voltage cathode,leading to the formation of a thin and homogeneous cathode electrolyte interface(CEI),mainly composed of LiF,on the cathode.The CEI with high electrochemical stability can effectively stabilize the cathode-electrolyte interface,enabling long-term stable cycling of the high-voltage LiCoO_(2)||Li and nickelrich NCM_(622)||Li batteries at room temperature.The simplicity and scalability of the strategy makes the reported PEO-based PE potentially applicable in high-voltage SSLBs in practice.
