With the aim to enhance the energy conversion efficiency of the rainbow shape piezoelectric transducer, an analysis model of energy conversion efficiency is established based on the elastic mechanics theory and piezoe...With the aim to enhance the energy conversion efficiency of the rainbow shape piezoelectric transducer, an analysis model of energy conversion efficiency is established based on the elastic mechanics theory and piezoelectricity theory. It can be found that the energy conversion efficiency of the rainbow shape piezoelectric transducer mainly depends on its shape parameters and ma- terial properties from the analysis model. Simulation results show that there is an optimal length ratio to generate maximum en- ergy conversion efficiency and the optimal length ratios and energy conversion efficiencies of beryllium bronze substrate trans- ducer and steel substrate transducer are （0.65, 2.21%） and （0.65, 1.64%） respectively. The optimal thickness ratios and energy conversion efficieneies of beryllium bronze substrate transducer and steel substrate transducer are （1.16, 2.56%） and （1.49, 1.57%） respectively. With the increase of width ratio and initial curvature radius, both the energy conversion efficiencies de- crease. Moreover, beryllium bronze flexible substrate transducer is superior to the steel flexible substrate transducer.展开更多
Ramp-up experiments by means of lower hybrid wave on HT-7 superconducting tokamak have been performed and analyzed. A ramp-up rate of over 300 kA/s is obtained and a conversion efficiency of over 1.0% has been achieve...Ramp-up experiments by means of lower hybrid wave on HT-7 superconducting tokamak have been performed and analyzed. A ramp-up rate of over 300 kA/s is obtained and a conversion efficiency of over 1.0% has been achieved during the ramp-up phase. The study of the dependence of conversion efficiency on plasma density shows that the conversion efficiency is affected by the driven current, which is mainly dominated by the competition of impurity concentration with wave accessibility condition. In addition, the effect of current profile may play an important role in determining the conversion efficiency.展开更多
Efficient CO_(2) electroreduction requires catalysts for enhanced energy conversion efficiency and carbon product selectivity with low overpotential,in consideration of the interference of competitive H_(2) evolution ...Efficient CO_(2) electroreduction requires catalysts for enhanced energy conversion efficiency and carbon product selectivity with low overpotential,in consideration of the interference of competitive H_(2) evolution reaction and complex intermediate species involved.We proposed that adaptive electronic structures based on dynamic mixed-valence interconversion would facilitate electron transfer and intermediate turnover during the catalysis,ensuring high activity,selectivity,and durability.Herein,a novel mixed-valence Cu-based metal-organic framework was prepared using an electron-rich linker for electrocatalytic reduction of CO_(2).The designed material delivered a remarkable Faradaic efficiency of 99.2%for C_(1) liquid fuels at a low reduction potential of -0.1 V versus reversible hydrogen electrode,considerably higher than that of the commercial copper foam and competitive to the Cu-based electrocatalysts reported.The experimental data and theoretical calculations verified the Cu(Ⅰ)/Cu(Ⅱ)interconversion and the much higher energy barrier of H2 evolution than carbon product generation.Such a feasible strategy,simultaneously improving energy conversion efficiency,carbon product selectivity,and structural robustness,provides great insights into rational catalyst customization for sustainable CO_(2) conversion.展开更多
Water power is one of the key renewable energy resources,whose efficiency is often hampered due to inefficient water flow management,turbine performance,and environmental variations.Most existing optimization techniqu...Water power is one of the key renewable energy resources,whose efficiency is often hampered due to inefficient water flow management,turbine performance,and environmental variations.Most existing optimization techniques lack the real-time adaptability to sufficiently allocate resources in terms of location and time.Hence,a novel Scalable Tas-manian Devil Optimization(STDO)algorithm is introduced to optimize hydropower generation for maximum power efficiency.Using the STDO to model important system characteristics including water flow,turbine changes,and energy conversion efficiency is part of the process.In the final analysis,optimizing these settings in would help reduce inefficiencies and maximize power generation output.Following that,simulations based on actual hydroelectric data are used to analyze the algorithm's effectiveness.The simulation results provide evidence that the STDO algorithm can enhance hydropower plant efficiency tremendously translating to considerable energy output augmentation compared to conven-tional optimization methods.STDO achieves the reliability(92.5),resiliency(74.3),and reduced vulnerability(9.3).To guarantee increased efficiency towards ecologically friendly power generation,the STDO algorithm may thus offer efficient resource optimization for hydropower.A clear route is made available for expanding the efficiency of current hydropower facilities while tackling the long-term objectives of reducing the environmental impact and increasing the energy output of energy produced from renewable sources.展开更多
Energy conversion in micro/nano-systems is a subject of current research,among which the electrokinetic energy conversion has attracted extensive attention.However,there exist two different definitions on the electrok...Energy conversion in micro/nano-systems is a subject of current research,among which the electrokinetic energy conversion has attracted extensive attention.However,there exist two different definitions on the electrokinetic energy conversion efficiency in literature.A few researchers defined the efficiency using the pure pressure-driven flow rate,while other groups defined the efficiency based on the flow rate with the inclusion of the effect of the streaming potential field.In this work,both definitions are investigated for different fluid types under the periodic electrokinetic flow condition.For Newtonian fluids,the two definitions give similar results.However,for viscoelastic fluids,these two definitions lead to significant difference.The efficiency defined by the pure pressure-driven flow rate even exceeds 100%in a certain range of the parameters.The result shows that in the case of viscoelastic flow,it is incorrect to define the energy conversion efficiency by pure pressure-driven flow rate.At the same time,the reason for this problem is clarified through comprehensive analysis.展开更多
In this work,the effects of externally applied axial pressure gradients and transverse magnetic fields on the electrokinetic energy conversion(EKEC)efficiency and the streaming potential of nanofluids through a microa...In this work,the effects of externally applied axial pressure gradients and transverse magnetic fields on the electrokinetic energy conversion(EKEC)efficiency and the streaming potential of nanofluids through a microannulus are studied.The analytical solution for electro-magneto-hydro-dynamic(EMHD)flow is obtained under the condition of the Debye-Huuckel linearization.Especially,Green’s function method is used to obtain the analytical solutions of the velocity field.The result shows that the velocity distribution is characterized by the dimensionless frequency?,the Hartmann number Ha,the volume fraction of the nanoparticlesφ,the geometric radius ratio a,and the wallζpotential ratio b.Moreover,the effects of three kinds of periodic excitations are compared and discussed.The results also show that the periodic excitation of the square waveform is more effective in increasing the streaming potential and the EKEC efficiency.It is worth noting that adjusting the wallζpotential ratio and the geometric radius ratio can affect the streaming potential and the EKEC efficiency.展开更多
A novel method to calculate fuel-electric conversion factor for full hybrid electric vehicle（HEV）equipped with continuously variable transmission（CVT）is proposed.Based on consideration of the efficiency of pivotal...A novel method to calculate fuel-electric conversion factor for full hybrid electric vehicle（HEV）equipped with continuously variable transmission（CVT）is proposed.Based on consideration of the efficiency of pivotal components,electric motor,system efficiency optimization models are developed.According to the target of instantaneous optimization of system efficiency,operating ranges of each mode of power-train are determined,and the corresponding energy management strategies are established.The simulation results demonstrate that the energy management strategy proposed can substantially improve the vehicle fuel economy,and keep battery state of charge（SOC）change in a reasonable variation range.展开更多
Based on two- and three-dimensional potential flow theories, the width effects on the hydrodynamics of a bottom-hinged trapezoidal pendulum wave energy converter are discussed. The two-dimensional eigenfunction expans...Based on two- and three-dimensional potential flow theories, the width effects on the hydrodynamics of a bottom-hinged trapezoidal pendulum wave energy converter are discussed. The two-dimensional eigenfunction expansion method is used to obtain the diffraction and radiation solutions when the converter width tends to be infinity. The trapezoidal section of the converter is approximated by a rectangular section for simplification. The nonlinear viscous damping effects are accounted for by including a drag term in the two- and three-dimensional methods. It is found that the three- dimensional results are in good agreement with the two-dimensional results when the converter width becomes larger, especially when the converter width is infinity, which shows that both of the methods are reasonable. Meantime, it is also found that the peak value of the conversion efficiency decreases as the converter width increases in short wave periods while increases when the converter width increases in long wave periods.展开更多
Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method （AM） was used to separate the incident and reflected wa...Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method （AM） was used to separate the incident and reflected waves propagating in a wave flume by analysing wave records measured at two locations. The response amplitude operator （RAO）, primary conversion efficiency and the total conversion efficiency of the wave energy converter were studied; furthermore, the power take-off damping coefficients corresponding to the load resistances in the experiment were also obtained. The findings demonstrate that the natural period for a pendulum wave energy converter is relatively large. A lower load resistance gives rise to a larger damping coefficient. The model shows relatively higher wave energy conversion efficiency in the range of 1.0-1.2 s for the incident wave period. The maximum primary conversion efficiency achieved was 55.5%, and the maximum overall conversion efficiency was 39.4%.展开更多
The generation of electricity,considering environmental and eco-nomic factors is one of the most important challenges of recent years.In this article,a thermoelectric generator(TEG)is proposed to use the thermal energ...The generation of electricity,considering environmental and eco-nomic factors is one of the most important challenges of recent years.In this article,a thermoelectric generator(TEG)is proposed to use the thermal energy of an electric water heater(EWH)to generate electricity independently.To improve the energy conversion efficiency of the TEG,a fuzzy logic con-troller(FLC)-based perturb&observe(P&O)type maximum power point tracking(MPPT)control algorithm is used in this study.An EWH is one of the major electricity consuming household appliances which causes a higher electricity price for consumers.Also,a significant amount of thermal energy generated by EWH is wasted every day,especially during the winter season.In recent years,TEGs have been widely developed to convert surplus or unused thermal energy into usable electricity.In this context,the proposed model is designed to use the thermal energy stored in the EWH to generate electricity.In addition,the generated electricity can be easily stored in a battery storage system to supply electricity to various household appliances with low-power-consumption.The proposed MPPT control algorithm helps the system to quickly reach the optimal point corresponding to the maximum power output and maintains the system operating point at the maximum power output level.To validate the usefulness of the proposed scheme,a study model was developed in the MATLAB Simulink environment and its performance was investigated by simulation under steady state and transient conditions.The results of the study confirmed that the system is capable of generating adequate power from the available thermal energy of EWH.It was also found that the output power and efficiency of the system can be improved by maintaining a higher temperature difference at the input terminals of the TEG.Moreover,the real-time temperature data of Abha city in Saudi Arabia is considered to analyze the feasibility of the proposed system for practical implementation.展开更多
The phenomenon of liquid metal“heartbeat”oscillation presents intriguing applications in microfluidic devices,drug delivery,andminiature robotics.However,achieving high vibrational kinetic energy outputs in these sy...The phenomenon of liquid metal“heartbeat”oscillation presents intriguing applications in microfluidic devices,drug delivery,andminiature robotics.However,achieving high vibrational kinetic energy outputs in these systems remains challenging.In this study,we developed a graphite ring electrode with V-shaped inner wall that enables wide-ranging control over the oscillation performance based on droplet size and the height of the V-shape.The mechanism driving the heartbeat is defined as a dynamic process involving the transformation of the oxide layer.Through electrochemical analysis,we confirmed three distinct states of the heartbeat and introduced a novel model to elucidate the role of the V-shaped structure in initiating and halting the oscillations.A comprehensive series of experiments explored how various factors,such as droplet volume,voltage,tilt angle,and V-shape height,affect heartbeat performance,achieving a significant conversion from surface energy to vibrational kinetic energy as high as 4732 J m^(-2) s^(-1).The increase in energy output is attributed to the synergistic effect of the V-shape height and droplet size on the oscillations.These results not only advance our understanding of liquidmetal droplet manipulation but also pave the way for designing high-speed microfluidic pumping systems.展开更多
The integration of photocatalysis with electrochemical energy storage offers promising solutions for offgrid power supply. Herein, carbon cloth-supported TiO_(2)nanorod arrays are engineered as a model platform to exp...The integration of photocatalysis with electrochemical energy storage offers promising solutions for offgrid power supply. Herein, carbon cloth-supported TiO_(2)nanorod arrays are engineered as a model platform to explore photoelectrochemical synergy in integrated photo-rechargeable lithium-ion batteries(PRLiBs). Through operando characterizations and theory calculations, we found that photoexcitation lowers the Li^(+)migration barrier by 0.16 eV through electronic states redistribution near the Fermi level,thereby accelerating Li^(+)transport and enhancing the intercalation process during photo-assisted charging and discharging. Three key principles governing dual operational modes(light-assisted charge/discharge and pure light charging) are established for PRLiBs:(i) the capacity enhancement during photoassisted charging is primarily due to photocatalytic Li^(+)extraction via hole-driven oxidation at the TiO_(2)/electrolyte interface and electric double-layer reconstruction;(ii) the long-standing controversy in solar-to-electricity conversion efficiency(g) is resolved by introducing a polarization-decoupled model to quantify g, distinguishing genuine catalytic contributions from parasitic self-charging effects;and(iii)during light-only charging without external bias, the capacity increase is predominantly driven by the photocatalytic oxidation of the TiO_(2)photoelectrode, a single-electrode process without electron transfer through an external circuit, distinct from conventional dual-electrode charging. This work lays a solid theoretical foundation for understanding the mechanisms of PRLiBs and provides precise guidelines for g calculations, offering valuable insights for the future development of photo-energy storage devices.展开更多
The authors have studied the spectroscopic characteristics and the fluorescence lifetime for the chloroplasts from spinach (Spinacia oleracea L.) and water hyacinth (Eichhornia crassipes (Mart) Solms.) plant leaves by...The authors have studied the spectroscopic characteristics and the fluorescence lifetime for the chloroplasts from spinach (Spinacia oleracea L.) and water hyacinth (Eichhornia crassipes (Mart) Solms.) plant leaves by absorption spectra, low temperature steady_state fluorescence spectroscopy and single photon counting measurement under the same conditions. The absorption spectra at room temperature for the spinach and water hyacinth chloroplasts are similar, which show that different plants can efficiently absorb light of same wavelength. The low temperature steady_state fluorescence spectroscopy for the water hyacinth chloroplast reveals a poor balance of photon quantum between two photosystems. The fluorescence decays in PSⅡ measured at the natural Q A state for the chloroplasts have been fitted by a three_exponential kinetic model. The slow lifetime fluorescence component is assigned to a collection of associated light harvesting Chl a/b proteins, the fast lifetime component to the reaction center of PSⅡ and the middle lifetime component to the delay fluorescence of recombination of P + 680 and Pheo -. The excited energy conversion efficiency (η) in PSⅡ RC is 87% and 91% respectively for the water hyacinth and spinach chloroplasts calculated on the 20 ps model. This interesting result is not consistent with what is assumed that the efficiency is 100% in PSⅡ RC. The results in this paper also present a support for the 20 ps electron transfer time constant in PSⅡ RC. On the viewpoint of excitation energy conversion efficiency, the growing rate for the water hyacinth plan is smaller than that for the spinach plant. But, authors' results show those plants can perform highly efficient transfer of photo_excitation energy from the light_harvesting pigment system to the reaction center (approximately 100%).展开更多
The micro-combustion chamber is the key component for micro-TPV systems. To improve the combustor wall temperature level and its uniformity and efficiency, an improved flat micro-combustor with a front cavity is built...The micro-combustion chamber is the key component for micro-TPV systems. To improve the combustor wall temperature level and its uniformity and efficiency, an improved flat micro-combustor with a front cavity is built, and the combustion performance of the original and improved combustors of premixed H2/air flames under various inlet velocities and equivalence ratios is numerically investigated. The effects of the front cavity height and length on the outer wall temperature and efficiency are also discussed. The front cavity significantly improves the average outer wall temperature, outer wall temperature uniformity, and combustion efficiency of the micro-combustor, increases the area of the high temperature zone, and enhances the heat transfer between the burned blends and inner walls. The micro-combustor with the front cavity length of 2.0 mm and height of 0.5 mm is suitable for micro-TPV system application due to the relatively high outer wall temperature, combustion efficiency, and the most uniform outer wall temperature.展开更多
Physiological indices related to the efficiency (F-v/F-m) of light energy conversion in PS II and the peroxidation of membrane lipid were measured in leaves of Oryza sativa L. sp. indica rice cv. 'Shanyou 63' ...Physiological indices related to the efficiency (F-v/F-m) of light energy conversion in PS II and the peroxidation of membrane lipid were measured in leaves of Oryza sativa L. sp. indica rice cv. 'Shanyou 63' and sp. japonica rice cv. '9516'' under different temperatures and fight intensities for 4 days. No changes in F-v/F-m and membrane lipid peroxidation product (MDA) were observed, so neither photoinhibition nor photooxidation happened in both rice cultivars under moderate temperature and medium light intensity. However, F-v/F-m dropped obviously with no change in MDA contents, and photoinhibition appeared in indica rice cv. 'Shanyou 63' under medium temperature and strong light intensity. Furthermore, both photoinhibition and photooxidation were observed in two rice cultivars under chilling temperature and strong light intensity. Experiments with inhibitors under chilling temperature and strong light intensity showed that indica rice had a decrease in DI protein content and SOD activity, and the extent of inhibition of xanthophyll. cycle and nonphotochemical quenching (qN) was larger, and a higher level of MDA was observed. The photoinhibition and photooxidation in indica rice were more distinct as compared with japonica rice. The authors suggested that PS II light energy conversion efficiency (F-v/F-m) and membrane lipid peroxidation were the key indices for the detection of photooxidation.展开更多
Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and ...Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO2 thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO2 nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO2 thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO2 film presents excellent dye absorption performance and even doesn＇t need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.展开更多
In the past few years,attention has mainly been focused on the symmetric Brownian motor(BM)with Gaussian noises,whose current and energy conversion efficiency are very low.Here,we investigate the operating performance...In the past few years,attention has mainly been focused on the symmetric Brownian motor(BM)with Gaussian noises,whose current and energy conversion efficiency are very low.Here,we investigate the operating performance of the symmetric BM subjected to Lévy noise.Through numerical simulations,it is found that the operating performance of the motor can be greatly improved in asymmetric Lévy noise.Without any load,the Lévy noises with smaller stable indexes can let the motor give rise to a much greater current.With a load,the energy conversion efficiency of the motor can be enhanced by adjusting the stable indexes of the Lévy noises with symmetry breaking.The results of this research are of great significance for opening up BM’s intrinsic physical mechanism and promoting the development of nanotechnology.展开更多
In the induction heating of airport pavement to remove snow and ice,soft magnetic geopolymer composite(SMGC)can be used to gather the dissipated electromagnetic energy,thus enhancing the energy utilization efficiency....In the induction heating of airport pavement to remove snow and ice,soft magnetic geopolymer composite(SMGC)can be used to gather the dissipated electromagnetic energy,thus enhancing the energy utilization efficiency.The aim of this work is to analyze the influence mechanism of iron powder content on the electromagnetic and mechanical performance of SMGC,so as to provide theoretical guidance for the design of soft magnetic layer within airport pavement structure.The results show that the increase of iron powder content reduces the resistance and magnetoresistance of SMGC by decreasing the content of non-magnetic phases between iron powder.However,the reduction of iron powder spacing also provides a shorter transmission path for the inter-particle eddy currents in the SMGC specimen,which enhances the exchange coupling between iron powder,thus increasing the electromagnetic loss.Therefore,the compatibility between magnetic permeability and electromagnetic loss should be considered comprehensively in the mix design of SMGC.In addition,although iron powder can enhance the mechanical properties of SMGC by improving the density of geopolymer matrix,the excessive amount of iron powder can lead to a weak interfacial transition zone between geopolymer matrix and iron powder.According to the induction heating results,optimized SMGC can improve the energy transfer efficiency of induction heating by 24.03%.展开更多
The impulse waves induced by large-reservoir landslides can be characterized by a low Froude number.However,systematic research on predictive models specifically targeting the initial primary wave is lacking.Taking th...The impulse waves induced by large-reservoir landslides can be characterized by a low Froude number.However,systematic research on predictive models specifically targeting the initial primary wave is lacking.Taking the Shuipingzi 1#landslide that occurred in the Baihetan Reservoir area of the Jinsha River in China as an engineering example,this study established a large-scale physical model(with dimensions of 30 m×29 m×3.5 m at a scale of 1:150)and conducted scaled experiments on 3D landslide-induced impulse waves.During the process in which a sliding mass displaced and compressed a body of water to generate waves,the maximum initial wave amplitude was found to be positively correlated with the sliding velocity and the volume of the landslide.With the increase in the water depth,the wave amplitude initially increased and then decreased.The duration of pressure exertion by the sliding mass at its maximum velocity directly correlated with an elevated wave amplitude.Based on the theories of low-amplitude waves and energy conservation,while considering the energy conversion efficiency,a predictive model for the initial wave amplitude was derived.This model could fit and validate the functions of wavelength and wave velocity.The accuracy of the initial wave amplitude was verified using physical experiment data,with a prediction accuracy for the maximum initial wave amplitude reaching 90%.The conversion efficiency(η)directly determined the accuracy of the estimation formula.Under clear conditions for landslide-induced impulse wave generation,estimating the value ofηthrough analogy cases was feasible.This study has derived the landslide-induced impulse waves amplitude prediction formula from the standpoints of wave theory and energy conservation,with greater consideration given to the intrinsic characteristics in the formation process of landslide-induced impulse waves,thereby enhancing the applicability and extensibility of the formula.This can facilitate the development of empirical estimation methods for landslide-induced impulse waves toward universality.展开更多
The development of new materials plays a critical role in improving the efficiency of organic solar cells(OSCs).At present,the relatively high-lying highest occupied molecular orbital(HOMO)level of the high-efficiency...The development of new materials plays a critical role in improving the efficiency of organic solar cells(OSCs).At present,the relatively high-lying highest occupied molecular orbital(HOMO)level of the high-efficiency polymer donor is regarded as one of the main reasons for the low open-circuit voltage(V_(OC)).In this work,we introduced the strong electron-withdrawing thiazole unit into the construction of a polymer donor.We designed and prepared an alternating donor-acceptor material,namely PSZ,by copolymerizing 4-methyl thiazole with an electron-donating benzodithiophene unit and studied its application in high-efficiency OSCs.The optical and electrical properties of the new material were characterized by UV-Vis absorption spectroscopy and electrochemical cyclic voltammetry.Results show that PSZ is a typical wide-bandgap material with a high optical bandgap of 2.0 eV and a deep HOMO level of-5.70 eV.When a non-fullerene BTP-eC9 was selected as the acceptor material,V_(OC) reached 0.88 V in the resulting device,and the corresponding power conversion efficiency(PCE)was8.15%.In addition,when PSZ was added as the third component to the binary photoactive combination with PBDB-TF as the donor and BTP-eC9 as the acceptor,V_(OC) of the cell device could be increased,thereby obtaining a high PCE of 17.4%.These results indicated that introducing thiazole units into polymer donors can remarkably reduce the HOMO levels and improve V_(OC) and PCE in OSCs.展开更多
基金National Natural Science Foundation of China (10972 102)Research Fund for the Doctoral Program of Higher Education of China (200802870007)Technology Research and Development Program of Jiangsu Province (BE2009163)
文摘With the aim to enhance the energy conversion efficiency of the rainbow shape piezoelectric transducer, an analysis model of energy conversion efficiency is established based on the elastic mechanics theory and piezoelectricity theory. It can be found that the energy conversion efficiency of the rainbow shape piezoelectric transducer mainly depends on its shape parameters and ma- terial properties from the analysis model. Simulation results show that there is an optimal length ratio to generate maximum en- ergy conversion efficiency and the optimal length ratios and energy conversion efficiencies of beryllium bronze substrate trans- ducer and steel substrate transducer are （0.65, 2.21%） and （0.65, 1.64%） respectively. The optimal thickness ratios and energy conversion efficieneies of beryllium bronze substrate transducer and steel substrate transducer are （1.16, 2.56%） and （1.49, 1.57%） respectively. With the increase of width ratio and initial curvature radius, both the energy conversion efficiencies de- crease. Moreover, beryllium bronze flexible substrate transducer is superior to the steel flexible substrate transducer.
文摘Ramp-up experiments by means of lower hybrid wave on HT-7 superconducting tokamak have been performed and analyzed. A ramp-up rate of over 300 kA/s is obtained and a conversion efficiency of over 1.0% has been achieved during the ramp-up phase. The study of the dependence of conversion efficiency on plasma density shows that the conversion efficiency is affected by the driven current, which is mainly dominated by the competition of impurity concentration with wave accessibility condition. In addition, the effect of current profile may play an important role in determining the conversion efficiency.
基金granted by the National Natural Science Foundation of China(Nos.22376161 and 52373216)the National Key Research and Development Program of China(No.2022YFE0110500)the Fundamental Research Funds for the Central Universities of China.
文摘Efficient CO_(2) electroreduction requires catalysts for enhanced energy conversion efficiency and carbon product selectivity with low overpotential,in consideration of the interference of competitive H_(2) evolution reaction and complex intermediate species involved.We proposed that adaptive electronic structures based on dynamic mixed-valence interconversion would facilitate electron transfer and intermediate turnover during the catalysis,ensuring high activity,selectivity,and durability.Herein,a novel mixed-valence Cu-based metal-organic framework was prepared using an electron-rich linker for electrocatalytic reduction of CO_(2).The designed material delivered a remarkable Faradaic efficiency of 99.2%for C_(1) liquid fuels at a low reduction potential of -0.1 V versus reversible hydrogen electrode,considerably higher than that of the commercial copper foam and competitive to the Cu-based electrocatalysts reported.The experimental data and theoretical calculations verified the Cu(Ⅰ)/Cu(Ⅱ)interconversion and the much higher energy barrier of H2 evolution than carbon product generation.Such a feasible strategy,simultaneously improving energy conversion efficiency,carbon product selectivity,and structural robustness,provides great insights into rational catalyst customization for sustainable CO_(2) conversion.
文摘Water power is one of the key renewable energy resources,whose efficiency is often hampered due to inefficient water flow management,turbine performance,and environmental variations.Most existing optimization techniques lack the real-time adaptability to sufficiently allocate resources in terms of location and time.Hence,a novel Scalable Tas-manian Devil Optimization(STDO)algorithm is introduced to optimize hydropower generation for maximum power efficiency.Using the STDO to model important system characteristics including water flow,turbine changes,and energy conversion efficiency is part of the process.In the final analysis,optimizing these settings in would help reduce inefficiencies and maximize power generation output.Following that,simulations based on actual hydroelectric data are used to analyze the algorithm's effectiveness.The simulation results provide evidence that the STDO algorithm can enhance hydropower plant efficiency tremendously translating to considerable energy output augmentation compared to conven-tional optimization methods.STDO achieves the reliability(92.5),resiliency(74.3),and reduced vulnerability(9.3).To guarantee increased efficiency towards ecologically friendly power generation,the STDO algorithm may thus offer efficient resource optimization for hydropower.A clear route is made available for expanding the efficiency of current hydropower facilities while tackling the long-term objectives of reducing the environmental impact and increasing the energy output of energy produced from renewable sources.
基金Project supported by the National Natural Science Foundation of China(Nos.11902165,11772162,and 11862018)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Nos.2019BS01004 and 2021MS01007)the Inner Mongolia Grassland Talent(No.12000-12102013)。
文摘Energy conversion in micro/nano-systems is a subject of current research,among which the electrokinetic energy conversion has attracted extensive attention.However,there exist two different definitions on the electrokinetic energy conversion efficiency in literature.A few researchers defined the efficiency using the pure pressure-driven flow rate,while other groups defined the efficiency based on the flow rate with the inclusion of the effect of the streaming potential field.In this work,both definitions are investigated for different fluid types under the periodic electrokinetic flow condition.For Newtonian fluids,the two definitions give similar results.However,for viscoelastic fluids,these two definitions lead to significant difference.The efficiency defined by the pure pressure-driven flow rate even exceeds 100%in a certain range of the parameters.The result shows that in the case of viscoelastic flow,it is incorrect to define the energy conversion efficiency by pure pressure-driven flow rate.At the same time,the reason for this problem is clarified through comprehensive analysis.
基金Project supported by the National Natural Science Foundation of China(Nos.11772162,11802147)the Natural Science Foundation of Inner Mongolia(No.2018LH01015)+1 种基金the Foundation of Inner Mongolia Autonomous Region University Scientific Research Project(No.NJZY18093)the Foundation of Inner Mongolia University of Technology(No.ZD201714)。
文摘In this work,the effects of externally applied axial pressure gradients and transverse magnetic fields on the electrokinetic energy conversion(EKEC)efficiency and the streaming potential of nanofluids through a microannulus are studied.The analytical solution for electro-magneto-hydro-dynamic(EMHD)flow is obtained under the condition of the Debye-Huuckel linearization.Especially,Green’s function method is used to obtain the analytical solutions of the velocity field.The result shows that the velocity distribution is characterized by the dimensionless frequency?,the Hartmann number Ha,the volume fraction of the nanoparticlesφ,the geometric radius ratio a,and the wallζpotential ratio b.Moreover,the effects of three kinds of periodic excitations are compared and discussed.The results also show that the periodic excitation of the square waveform is more effective in increasing the streaming potential and the EKEC efficiency.It is worth noting that adjusting the wallζpotential ratio and the geometric radius ratio can affect the streaming potential and the EKEC efficiency.
基金Supported by the National Science and Technology Support Program(2013BAG12B01)Foundational and Advanced Research Program General Project of Chongqing City(cstc2013jcyjjq60002)
文摘A novel method to calculate fuel-electric conversion factor for full hybrid electric vehicle（HEV）equipped with continuously variable transmission（CVT）is proposed.Based on consideration of the efficiency of pivotal components,electric motor,system efficiency optimization models are developed.According to the target of instantaneous optimization of system efficiency,operating ranges of each mode of power-train are determined,and the corresponding energy management strategies are established.The simulation results demonstrate that the energy management strategy proposed can substantially improve the vehicle fuel economy,and keep battery state of charge（SOC）change in a reasonable variation range.
基金supported by the Special Fund for Marine Renewable Energy of the Ministry of Finance of China(No.GD2010ZC02)
文摘Based on two- and three-dimensional potential flow theories, the width effects on the hydrodynamics of a bottom-hinged trapezoidal pendulum wave energy converter are discussed. The two-dimensional eigenfunction expansion method is used to obtain the diffraction and radiation solutions when the converter width tends to be infinity. The trapezoidal section of the converter is approximated by a rectangular section for simplification. The nonlinear viscous damping effects are accounted for by including a drag term in the two- and three-dimensional methods. It is found that the three- dimensional results are in good agreement with the two-dimensional results when the converter width becomes larger, especially when the converter width is infinity, which shows that both of the methods are reasonable. Meantime, it is also found that the peak value of the conversion efficiency decreases as the converter width increases in short wave periods while increases when the converter width increases in long wave periods.
基金financially supported by the Special Fund for Marine Renewable Energy of the Ministry of Finance of China(Grant No.GD2010ZC02)
文摘Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method （AM） was used to separate the incident and reflected waves propagating in a wave flume by analysing wave records measured at two locations. The response amplitude operator （RAO）, primary conversion efficiency and the total conversion efficiency of the wave energy converter were studied; furthermore, the power take-off damping coefficients corresponding to the load resistances in the experiment were also obtained. The findings demonstrate that the natural period for a pendulum wave energy converter is relatively large. A lower load resistance gives rise to a larger damping coefficient. The model shows relatively higher wave energy conversion efficiency in the range of 1.0-1.2 s for the incident wave period. The maximum primary conversion efficiency achieved was 55.5%, and the maximum overall conversion efficiency was 39.4%.
基金Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia for funding this research work through the project number (IF2-PSAU/2022/01/22797).
文摘The generation of electricity,considering environmental and eco-nomic factors is one of the most important challenges of recent years.In this article,a thermoelectric generator(TEG)is proposed to use the thermal energy of an electric water heater(EWH)to generate electricity independently.To improve the energy conversion efficiency of the TEG,a fuzzy logic con-troller(FLC)-based perturb&observe(P&O)type maximum power point tracking(MPPT)control algorithm is used in this study.An EWH is one of the major electricity consuming household appliances which causes a higher electricity price for consumers.Also,a significant amount of thermal energy generated by EWH is wasted every day,especially during the winter season.In recent years,TEGs have been widely developed to convert surplus or unused thermal energy into usable electricity.In this context,the proposed model is designed to use the thermal energy stored in the EWH to generate electricity.In addition,the generated electricity can be easily stored in a battery storage system to supply electricity to various household appliances with low-power-consumption.The proposed MPPT control algorithm helps the system to quickly reach the optimal point corresponding to the maximum power output and maintains the system operating point at the maximum power output level.To validate the usefulness of the proposed scheme,a study model was developed in the MATLAB Simulink environment and its performance was investigated by simulation under steady state and transient conditions.The results of the study confirmed that the system is capable of generating adequate power from the available thermal energy of EWH.It was also found that the output power and efficiency of the system can be improved by maintaining a higher temperature difference at the input terminals of the TEG.Moreover,the real-time temperature data of Abha city in Saudi Arabia is considered to analyze the feasibility of the proposed system for practical implementation.
基金National Natural Science Foundation of China,Grant/Award Number:51901009。
文摘The phenomenon of liquid metal“heartbeat”oscillation presents intriguing applications in microfluidic devices,drug delivery,andminiature robotics.However,achieving high vibrational kinetic energy outputs in these systems remains challenging.In this study,we developed a graphite ring electrode with V-shaped inner wall that enables wide-ranging control over the oscillation performance based on droplet size and the height of the V-shape.The mechanism driving the heartbeat is defined as a dynamic process involving the transformation of the oxide layer.Through electrochemical analysis,we confirmed three distinct states of the heartbeat and introduced a novel model to elucidate the role of the V-shaped structure in initiating and halting the oscillations.A comprehensive series of experiments explored how various factors,such as droplet volume,voltage,tilt angle,and V-shape height,affect heartbeat performance,achieving a significant conversion from surface energy to vibrational kinetic energy as high as 4732 J m^(-2) s^(-1).The increase in energy output is attributed to the synergistic effect of the V-shape height and droplet size on the oscillations.These results not only advance our understanding of liquidmetal droplet manipulation but also pave the way for designing high-speed microfluidic pumping systems.
基金the financial support from the National Natural Science Foundation of China (22472040)the Basic and Applied Basic Research Foundation of Guangdong Province (2023A1515012033)。
文摘The integration of photocatalysis with electrochemical energy storage offers promising solutions for offgrid power supply. Herein, carbon cloth-supported TiO_(2)nanorod arrays are engineered as a model platform to explore photoelectrochemical synergy in integrated photo-rechargeable lithium-ion batteries(PRLiBs). Through operando characterizations and theory calculations, we found that photoexcitation lowers the Li^(+)migration barrier by 0.16 eV through electronic states redistribution near the Fermi level,thereby accelerating Li^(+)transport and enhancing the intercalation process during photo-assisted charging and discharging. Three key principles governing dual operational modes(light-assisted charge/discharge and pure light charging) are established for PRLiBs:(i) the capacity enhancement during photoassisted charging is primarily due to photocatalytic Li^(+)extraction via hole-driven oxidation at the TiO_(2)/electrolyte interface and electric double-layer reconstruction;(ii) the long-standing controversy in solar-to-electricity conversion efficiency(g) is resolved by introducing a polarization-decoupled model to quantify g, distinguishing genuine catalytic contributions from parasitic self-charging effects;and(iii)during light-only charging without external bias, the capacity increase is predominantly driven by the photocatalytic oxidation of the TiO_(2)photoelectrode, a single-electrode process without electron transfer through an external circuit, distinct from conventional dual-electrode charging. This work lays a solid theoretical foundation for understanding the mechanisms of PRLiBs and provides precise guidelines for g calculations, offering valuable insights for the future development of photo-energy storage devices.
文摘The authors have studied the spectroscopic characteristics and the fluorescence lifetime for the chloroplasts from spinach (Spinacia oleracea L.) and water hyacinth (Eichhornia crassipes (Mart) Solms.) plant leaves by absorption spectra, low temperature steady_state fluorescence spectroscopy and single photon counting measurement under the same conditions. The absorption spectra at room temperature for the spinach and water hyacinth chloroplasts are similar, which show that different plants can efficiently absorb light of same wavelength. The low temperature steady_state fluorescence spectroscopy for the water hyacinth chloroplast reveals a poor balance of photon quantum between two photosystems. The fluorescence decays in PSⅡ measured at the natural Q A state for the chloroplasts have been fitted by a three_exponential kinetic model. The slow lifetime fluorescence component is assigned to a collection of associated light harvesting Chl a/b proteins, the fast lifetime component to the reaction center of PSⅡ and the middle lifetime component to the delay fluorescence of recombination of P + 680 and Pheo -. The excited energy conversion efficiency (η) in PSⅡ RC is 87% and 91% respectively for the water hyacinth and spinach chloroplasts calculated on the 20 ps model. This interesting result is not consistent with what is assumed that the efficiency is 100% in PSⅡ RC. The results in this paper also present a support for the 20 ps electron transfer time constant in PSⅡ RC. On the viewpoint of excitation energy conversion efficiency, the growing rate for the water hyacinth plan is smaller than that for the spinach plant. But, authors' results show those plants can perform highly efficient transfer of photo_excitation energy from the light_harvesting pigment system to the reaction center (approximately 100%).
基金Project(11802336) supported by the National Natural Science Foundation of China
文摘The micro-combustion chamber is the key component for micro-TPV systems. To improve the combustor wall temperature level and its uniformity and efficiency, an improved flat micro-combustor with a front cavity is built, and the combustion performance of the original and improved combustors of premixed H2/air flames under various inlet velocities and equivalence ratios is numerically investigated. The effects of the front cavity height and length on the outer wall temperature and efficiency are also discussed. The front cavity significantly improves the average outer wall temperature, outer wall temperature uniformity, and combustion efficiency of the micro-combustor, increases the area of the high temperature zone, and enhances the heat transfer between the burned blends and inner walls. The micro-combustor with the front cavity length of 2.0 mm and height of 0.5 mm is suitable for micro-TPV system application due to the relatively high outer wall temperature, combustion efficiency, and the most uniform outer wall temperature.
文摘Physiological indices related to the efficiency (F-v/F-m) of light energy conversion in PS II and the peroxidation of membrane lipid were measured in leaves of Oryza sativa L. sp. indica rice cv. 'Shanyou 63' and sp. japonica rice cv. '9516'' under different temperatures and fight intensities for 4 days. No changes in F-v/F-m and membrane lipid peroxidation product (MDA) were observed, so neither photoinhibition nor photooxidation happened in both rice cultivars under moderate temperature and medium light intensity. However, F-v/F-m dropped obviously with no change in MDA contents, and photoinhibition appeared in indica rice cv. 'Shanyou 63' under medium temperature and strong light intensity. Furthermore, both photoinhibition and photooxidation were observed in two rice cultivars under chilling temperature and strong light intensity. Experiments with inhibitors under chilling temperature and strong light intensity showed that indica rice had a decrease in DI protein content and SOD activity, and the extent of inhibition of xanthophyll. cycle and nonphotochemical quenching (qN) was larger, and a higher level of MDA was observed. The photoinhibition and photooxidation in indica rice were more distinct as compared with japonica rice. The authors suggested that PS II light energy conversion efficiency (F-v/F-m) and membrane lipid peroxidation were the key indices for the detection of photooxidation.
文摘Self-made TiO2 nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO2 thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO2 thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO2 nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO2 thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO2 film presents excellent dye absorption performance and even doesn＇t need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.
基金Project supported by the Research Group of Nonequilibrium Statistics(Grant No.14078206)Kunming University of Science and Technology,China.
文摘In the past few years,attention has mainly been focused on the symmetric Brownian motor(BM)with Gaussian noises,whose current and energy conversion efficiency are very low.Here,we investigate the operating performance of the symmetric BM subjected to Lévy noise.Through numerical simulations,it is found that the operating performance of the motor can be greatly improved in asymmetric Lévy noise.Without any load,the Lévy noises with smaller stable indexes can let the motor give rise to a much greater current.With a load,the energy conversion efficiency of the motor can be enhanced by adjusting the stable indexes of the Lévy noises with symmetry breaking.The results of this research are of great significance for opening up BM’s intrinsic physical mechanism and promoting the development of nanotechnology.
基金This work was supported by National Key Research and Development Project(2020YFB1600102,2020YFA0714302)National Natural Science Foundation of China(51878164,51922030,52208430)+2 种基金Fundamental Research Funds for the Central Universities of China(2242022R10059)Natural Science Foundation of Jiangsu Province(SBK2021042206)Southeast University“Zhongying Young Scholars”Project,and Shuangchuang Program of Jiangsu Province(JSSCBS20210058).
文摘In the induction heating of airport pavement to remove snow and ice,soft magnetic geopolymer composite(SMGC)can be used to gather the dissipated electromagnetic energy,thus enhancing the energy utilization efficiency.The aim of this work is to analyze the influence mechanism of iron powder content on the electromagnetic and mechanical performance of SMGC,so as to provide theoretical guidance for the design of soft magnetic layer within airport pavement structure.The results show that the increase of iron powder content reduces the resistance and magnetoresistance of SMGC by decreasing the content of non-magnetic phases between iron powder.However,the reduction of iron powder spacing also provides a shorter transmission path for the inter-particle eddy currents in the SMGC specimen,which enhances the exchange coupling between iron powder,thus increasing the electromagnetic loss.Therefore,the compatibility between magnetic permeability and electromagnetic loss should be considered comprehensively in the mix design of SMGC.In addition,although iron powder can enhance the mechanical properties of SMGC by improving the density of geopolymer matrix,the excessive amount of iron powder can lead to a weak interfacial transition zone between geopolymer matrix and iron powder.According to the induction heating results,optimized SMGC can improve the energy transfer efficiency of induction heating by 24.03%.
基金The authors would like thank LI Renjiang and HU Bin from the China Three Gorges Corporation for providing many valuable suggestions for the establishment of the physical models.This work was supported by the National Natural Science Foundation of China(No.U23A2045)the China Three Gorges Corporation(YM(BHT)/(22)022)the Scientific Research Project of Chongqing Municipal Bureau of Planning and Natural Resources(Evaluation and Reinforcement Technology of Surge Disaster Caused by High and Steep Dangerous Rocks in Chongqing Reservoir Area of the Three Gorges Project,KJ-2023046).
文摘The impulse waves induced by large-reservoir landslides can be characterized by a low Froude number.However,systematic research on predictive models specifically targeting the initial primary wave is lacking.Taking the Shuipingzi 1#landslide that occurred in the Baihetan Reservoir area of the Jinsha River in China as an engineering example,this study established a large-scale physical model(with dimensions of 30 m×29 m×3.5 m at a scale of 1:150)and conducted scaled experiments on 3D landslide-induced impulse waves.During the process in which a sliding mass displaced and compressed a body of water to generate waves,the maximum initial wave amplitude was found to be positively correlated with the sliding velocity and the volume of the landslide.With the increase in the water depth,the wave amplitude initially increased and then decreased.The duration of pressure exertion by the sliding mass at its maximum velocity directly correlated with an elevated wave amplitude.Based on the theories of low-amplitude waves and energy conservation,while considering the energy conversion efficiency,a predictive model for the initial wave amplitude was derived.This model could fit and validate the functions of wavelength and wave velocity.The accuracy of the initial wave amplitude was verified using physical experiment data,with a prediction accuracy for the maximum initial wave amplitude reaching 90%.The conversion efficiency(η)directly determined the accuracy of the estimation formula.Under clear conditions for landslide-induced impulse wave generation,estimating the value ofηthrough analogy cases was feasible.This study has derived the landslide-induced impulse waves amplitude prediction formula from the standpoints of wave theory and energy conservation,with greater consideration given to the intrinsic characteristics in the formation process of landslide-induced impulse waves,thereby enhancing the applicability and extensibility of the formula.This can facilitate the development of empirical estimation methods for landslide-induced impulse waves toward universality.
基金supported by the National Natural Science Foundation of China(Nos.22122905 and 22075301)。
文摘The development of new materials plays a critical role in improving the efficiency of organic solar cells(OSCs).At present,the relatively high-lying highest occupied molecular orbital(HOMO)level of the high-efficiency polymer donor is regarded as one of the main reasons for the low open-circuit voltage(V_(OC)).In this work,we introduced the strong electron-withdrawing thiazole unit into the construction of a polymer donor.We designed and prepared an alternating donor-acceptor material,namely PSZ,by copolymerizing 4-methyl thiazole with an electron-donating benzodithiophene unit and studied its application in high-efficiency OSCs.The optical and electrical properties of the new material were characterized by UV-Vis absorption spectroscopy and electrochemical cyclic voltammetry.Results show that PSZ is a typical wide-bandgap material with a high optical bandgap of 2.0 eV and a deep HOMO level of-5.70 eV.When a non-fullerene BTP-eC9 was selected as the acceptor material,V_(OC) reached 0.88 V in the resulting device,and the corresponding power conversion efficiency(PCE)was8.15%.In addition,when PSZ was added as the third component to the binary photoactive combination with PBDB-TF as the donor and BTP-eC9 as the acceptor,V_(OC) of the cell device could be increased,thereby obtaining a high PCE of 17.4%.These results indicated that introducing thiazole units into polymer donors can remarkably reduce the HOMO levels and improve V_(OC) and PCE in OSCs.
