Two types of persistent heavy rainfall events （PHREs） over the Yangtze River-Huaihe River Basin were determined in a recent statistical study： type A, whose precipitation is mainly located to the south of the Yangt...Two types of persistent heavy rainfall events （PHREs） over the Yangtze River-Huaihe River Basin were determined in a recent statistical study： type A, whose precipitation is mainly located to the south of the Yangtze River; and type B, whose precipitation is mainly located to the north of the river. The present study investigated these two PHRE types using a newly derived set of energy equations to show the scale interaction and main energy paths contributing to the persistence of the precipitation. The main results were as follows. The available potential energy （APE） and kinetic energy （KE） associated with both PHRE types generally increased upward in the troposphere, with the energy of the type-A PHREs stronger than that of the type-B PHREs （except for in the middle troposphere）. There were two main common and universal energy paths of the two PHRE types： （1） the baroclinic energy conversion from APE to KE was the dominant energy source for the evolution of large-scale background circulations; and （2） the downscaled energy cascade processes of KE and APE were vital for sustaining the eddy flow, which directly caused the PHREs. The significant differences between the two PHRE types mainly appeared in the lower troposphere, where the baroclinic energy conversion associated with the eddy flow in type-A PHREs was from KE to APE, which reduced the intensity of the precipitation-related eddy flow; whereas, the conversion in type-B PHREs was from APE to KE, which enhanced the eddy flow.展开更多
In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, plann...In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.展开更多
This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch fr...This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch from proton exchange membranes(PEMs) to hydroxide exchange membranes(HEMs) may lead to a new-generation of affordable electrochemical energy devices including fuel cells, electrolyzers, and solar hydrogen generators. For lithium-ion batteries, a series of advancements in design and chemistry are required for electric vehicle and energy storage applications. Manufacturing process development and optimization of the LiF eP O_4/C cathode materials and several emerging novel anode materials are also discussed using the authors' work as examples.Design and manufacturing process of lithium-ion battery electrodes are introduced in detail, and modeling and optimization of large-scale lithium-ion batteries are also presented. Electrochemical energy materials and device innovations can be further prompted by better understanding of the fundamental transport phenomena involved in unit operations.展开更多
Using ball milling and single direction pressing, we can produce high performance NdFeB sintered magnets. The oxygen content of sintered magnets can be controlled under 1500xl0^-6 and the magnetic performance can be i...Using ball milling and single direction pressing, we can produce high performance NdFeB sintered magnets. The oxygen content of sintered magnets can be controlled under 1500xl0^-6 and the magnetic performance can be improved by using low oxygen processing. The high preformance NdFeB sintered magnets with Br=(1.4 ± 0.2)T, iHc>796 kA/m and (BH)max=(390± 16) kJ/m^3, have been batch produced.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which h...A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which has a unique temperature-dependent backward energy transfer process from selftrapped state to^(4)T_(1)energy level of Mn,is used for triggering the temperature alarm.The LSC with redemitted CsPbI_(3)perovskite-polymer composite films on the glass substrate is used for power supply.The spectrally separated nature between the green-emitted OMHs for temperature alarm and red-emitted CsPbI3in LSC for power supply allows for probing the signal light of temperature-responsive OMHs without the interference of LSCs,making it possible to calibrate the temperature visually just by a self-powered brightness detection circuit with LED indicators.Taking advantage of LSC without hot spot effects plaguing the solar cells,as-prepared temperature alarm system can operate well on both sunny and cloudy day.展开更多
In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emi...In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emission from the quantum level n+1 to level n can be deduced from the orbital angular momentum examined in the hydrogen atom. This time is found precisely equal to the time interval dictated by the Joule-Lenz law governing the electron transition between the levels n+1 and n. In the next step, the mechanical parameters entering the quantum systems are applied in calculating the time intervals characteristic for the electron transitions. This concerns the neighbouring energy levels in the hydrogen atom as well as the Landau levels in the electron gas submitted to the action of a constant magnetic field.展开更多
The energy utilization consistency method in process integration extracts the key component of process energy utilization, and simplifies the procedure of process analysis and integration. The method allows the conver...The energy utilization consistency method in process integration extracts the key component of process energy utilization, and simplifies the procedure of process analysis and integration. The method allows the conversion of the total process energy integration into a synthesis problem of a pseudo-heat exchanger network. The advantages of using the energy utilization consistency and the pseudo-temperature methods are presented by two examples of integration of large-scale complex processes. The improved genetic algorithm is proved to be an effective tool in the retrofitting procedures.展开更多
Energy efficiency is closely related to the evolution of biological systems and is important to their information processing. In this work, we calculate the excitation probability of a simple model of a bistable biolo...Energy efficiency is closely related to the evolution of biological systems and is important to their information processing. In this work, we calculate the excitation probability of a simple model of a bistable biological unit in response to pulsatile inputs, and its spontaneous excitation rate due to noise perturbation. Then we analytically calculate the mutual information, energy cost, and energy efficiency of an array of these bistable units. We find that the optimal number of units could maximize this array＇s energy efficiency in encoding pulse inputs, which depends on the fixed energy cost. We conclude that demand for energy efficiency in biological systems may strongly influence the size of these systems under the pressure of natural selection.展开更多
During the tokamak operation,variation of the stored energy can cause internal perturbations of the plasma.These perturbations may develop into large-scale vertical movement of the whole column for the vertically elon...During the tokamak operation,variation of the stored energy can cause internal perturbations of the plasma.These perturbations may develop into large-scale vertical movement of the whole column for the vertically elon-gated tokamak,eventually generating the hot vertical displacement event(VIDE,).It will cause considerable damage to the machine.In this work,the hot VDE process due to stored energy perturbations is investigated by a mature non-linear time-evolution code DINA.The influence on the vertical instability,the displacement direction and the electromagnetic loads on in-vessel components during the hot VDE are analyzed.It is shown that a larger perturbation leads to faster development of the vertical instability.Meanwhile the variation of the Shafranov shift,due to the energy change,is related to the VDE direction.The vertical electromagnetic force on the vacuum vessel and the halo current flowing in the divertor baffle become larger in the case of VDE moving towards the X point.展开更多
On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured wi...On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.展开更多
Porosity is a common phenomenon and can significantly hinder the quality of the coating.Here,the pore formation mechanism and the characteristics of the single tracks of the W-C coating using directed energy depositio...Porosity is a common phenomenon and can significantly hinder the quality of the coating.Here,the pore formation mechanism and the characteristics of the single tracks of the W-C coating using directed energy deposition(DED)are systematically investigated.The forming quality of the tracks,the distribution of the pores,and the elemental distribution near the pores are analyzed by the observations of the cross-sections of the tracks.The temperature field of the melt pool is discussed comprehensively to reveal the pore formation mechanism.The results confirm that Ni and Co evaporated during the DED process due to the high temperature of the melt pool.Pores were continuously produced adjacent to the fusion line when the melt pool was about to solidify since the temperature at the solidification front was higher than the boiling point of Ni.The vaporization area at the fusion line was proposed,where Ni could also evaporate at the time the melt pool started to solidify.The relationship between the solidification rate,the size of the vaporization area and the DED parameters(laser power and scanning speed)was established to discuss the causes of severe pores above the fusion line.This work contains a practical guide to reduce or eliminate the porosity in the coating preparation process on the surface of the tungsten alloy.展开更多
With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions ha...With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.展开更多
As an important intermediate product, short-chain fatty acids（SCFAs） can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion...As an important intermediate product, short-chain fatty acids（SCFAs） can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion process. In order to obtain more SCFA and methane,most studies in literatures were centered on enhancing the hydrolysis of sludge anaerobic digestion which was proved as un-efficient. Though the alkaline pretreatment in our previous study increased both the hydrolysis and acidification processes, it had a vast chemical cost which was considered uneconomical. In this paper, a low energy consumption pretreatment method, i.e. enhanced the whole three stages of the anaerobic fermentation processes at the same time, was reported, by which hydrolysis and acidification were both enhanced, and the SCFA and methane generation can be significantly improved with a small quantity of chemical input. Firstly, the effect of different pretreated temperatures and pretreatment time on sludge hydrolyzation was compared. It was found that sludge pretreated at 100°C for 60 min can achieve the maximal hydrolyzation. Further, effects of different initial p Hs on acidification of the thermal pretreated sludge were investigated and the highest SCFA was observed at initial p H 9.0with fermentation time of 6 d, the production of which was 348.63 mg COD/g VSS（6.8 times higher than the blank test） and the acetic acid was dominant acid. Then, the mechanisms for this new pretreatment significantly improving SCFA production were discussed. Finally,the effect of this low energy consumption pretreatment on methane generation was investigated.展开更多
In order to investigate the effect of water content on the energy evolution of red sandstone, the axial loading–unloading experiments on dry and water-saturated sandstone samples were conducted, and the distribution ...In order to investigate the effect of water content on the energy evolution of red sandstone, the axial loading–unloading experiments on dry and water-saturated sandstone samples were conducted, and the distribution and evolution of elastic energy and dissipated energy within the rock were measured.The results show that the saturation process from dry to fully-saturated states reduces the strength, rigidity and brittleness of the rock by 30.2%, 25.5% and 16.7%, respectively. The water-saturated sample has larger irreversible deformation in the pre-peak stage and smaller stress drop in the post-peak stage.The saturation process decreases the accumulation energy limit by 38.9%, but increases the dissipated energy and residual elastic energy density, thus greatly reducing the magnitude and rate of energy release. The water-saturated sample has lower conversion efficiency to elastic energy by 3% in the prepeak region; moreover, the elastic energy ratio falls with a smaller range in the post-peak stage.Therefore, saturation process can greatly reduce the risk of dynamic disaster, and heterogeneous water content can lead to dynamic disaster possibly on the other hand.展开更多
A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The ...A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.展开更多
This paper investigates the electron-vibrational（e-V）energy exchange in nitrogencontaining plasma,which is very efficient in the case of gas discharge and high speed flow.Based on Harmonic oscillator approximation a...This paper investigates the electron-vibrational（e-V）energy exchange in nitrogencontaining plasma,which is very efficient in the case of gas discharge and high speed flow.Based on Harmonic oscillator approximation and the assumption of the e-V relaxation through a continuous series of Boltzmann distributions over the vibrational states,an analytic approach is derived from the proposed scaling relation of e-V transition rates.A full kinetic model is then investigated by numerically solving the state-to-state master equation for all vibrational levels.The analytical approach leads to a Landau-Teller（LT）-type equation for relaxation of vibrational energy,and predicts the relaxation time on the right order of magnitude.By comparison with the kinetic model,the LT-type equation is valid in typical electron temperatures in gas discharge.However,the analytical approach is not capable of describing the vibrational distribution function during the e-V process in which a full kinetic model is required.展开更多
The grand challenges of climate change demand a new paradigm of urban design that takes the perfor- mance of urban systems into account, such as energy and water efficiency. Traditional urban design methods focus on t...The grand challenges of climate change demand a new paradigm of urban design that takes the perfor- mance of urban systems into account, such as energy and water efficiency. Traditional urban design methods focus on the form-making process and lack performance dimensions. Geodesign is an emerging approach that emphasizes the links between systems thinking, digital technology, and geographic con- text. This paper presents the research results of the first phase of a larger research collaboration and pro- poses an extended geodesign method for a district-scale urban design to integrate systems of renewable energy production, energy consumption, and storm water management, as well as a measurement of human experiences in cities. The method incorporates geographic information system （GIS）, parametric modeling techniques, and multidisciplinary design optimization （MDO） tools that enable collaborative design decision-making. The method is tested and refined in a test case with the objective of designing a near-zero-energy urban district. Our final method has three characteristics. （1） Integrated geodesign and parametric design： It uses a parametric design approach to generate focal-scale district prototypes by means of a custom procedural algorithm, and applies geodesign to evaluate the performances of design proposals. （2） A focus on design flow： It elaborates how to define problems, what information is selected, and what criteria are used in making design decisions. （3） Multi-objective optimization： The test case produces indicators from performance modeling and derives principles through a multi-objective computational experiment to inform how the design can be improved. This paper concludes with issues and next steps in modeling urban design and infrastructure systems based on MDO tools.展开更多
Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical str...Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.展开更多
Under Arctic warming,near-surface energy transfers have significantly changed,but few studies have focused on energy exchange over Arctic glacier due to limitations in available observations.In this study,the atmosphe...Under Arctic warming,near-surface energy transfers have significantly changed,but few studies have focused on energy exchange over Arctic glacier due to limitations in available observations.In this study,the atmospheric energy exchange processes over the Arctic glacier surface were analyzed by using observational data obtained in summer 2019 in comparison with those over the Arctic tundra surface.The energy budget over the glacier greatly differed from that over the tundra,characterized by less net shortwave radiation and downward sensible heat flux,due to the high albedo and icy surface.Most of the incoming solar radiation was injected into the glacier in summer,leading to snow ice melting.During the observation period,strong daily variations in near-surface heat transfer occurred over the Arctic glacier,with the maximum downward and upward heat fluxes occurring on 2 and 6 July 2019,respectively.Further analyses suggested that the maximum downward heat flux is mainly caused by the strong local thermal contrast above the glacier surface,while the maximum upward heat transfer cannot be explained by the classical turbulent heat transfer theory,possibly caused by countergradient heat transfer.Our results indicated that the near-surface energy exchange processes over Arctic glacier may be strongly related to local forcings,but a more in-depth investigation will be needed in the future when more observational data become available.展开更多
基金supported by the National Key Basic Research and Development Project of China(Grant No.2012CB417201)the National Natural Science Foundation of China(Grant Nos.41375053 and 41505038)
文摘Two types of persistent heavy rainfall events （PHREs） over the Yangtze River-Huaihe River Basin were determined in a recent statistical study： type A, whose precipitation is mainly located to the south of the Yangtze River; and type B, whose precipitation is mainly located to the north of the river. The present study investigated these two PHRE types using a newly derived set of energy equations to show the scale interaction and main energy paths contributing to the persistence of the precipitation. The main results were as follows. The available potential energy （APE） and kinetic energy （KE） associated with both PHRE types generally increased upward in the troposphere, with the energy of the type-A PHREs stronger than that of the type-B PHREs （except for in the middle troposphere）. There were two main common and universal energy paths of the two PHRE types： （1） the baroclinic energy conversion from APE to KE was the dominant energy source for the evolution of large-scale background circulations; and （2） the downscaled energy cascade processes of KE and APE were vital for sustaining the eddy flow, which directly caused the PHREs. The significant differences between the two PHRE types mainly appeared in the lower troposphere, where the baroclinic energy conversion associated with the eddy flow in type-A PHREs was from KE to APE, which reduced the intensity of the precipitation-related eddy flow; whereas, the conversion in type-B PHREs was from APE to KE, which enhanced the eddy flow.
文摘In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.
基金Supported by the National Basic Research Program of China(2014CB239703)the National Natural Science Foundation of China(21336003)the Science and Technology Commission of Shanghai Municipality(14DZ2250800)
文摘This review focuses on the application of process engineering in electrochemical energy conversion and storage devices innovation. For polymer electrolyte based devices, it highlights that a strategic simple switch from proton exchange membranes(PEMs) to hydroxide exchange membranes(HEMs) may lead to a new-generation of affordable electrochemical energy devices including fuel cells, electrolyzers, and solar hydrogen generators. For lithium-ion batteries, a series of advancements in design and chemistry are required for electric vehicle and energy storage applications. Manufacturing process development and optimization of the LiF eP O_4/C cathode materials and several emerging novel anode materials are also discussed using the authors' work as examples.Design and manufacturing process of lithium-ion battery electrodes are introduced in detail, and modeling and optimization of large-scale lithium-ion batteries are also presented. Electrochemical energy materials and device innovations can be further prompted by better understanding of the fundamental transport phenomena involved in unit operations.
文摘Using ball milling and single direction pressing, we can produce high performance NdFeB sintered magnets. The oxygen content of sintered magnets can be controlled under 1500xl0^-6 and the magnetic performance can be improved by using low oxygen processing. The high preformance NdFeB sintered magnets with Br=(1.4 ± 0.2)T, iHc>796 kA/m and (BH)max=(390± 16) kJ/m^3, have been batch produced.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
基金supported by the Natural Science Foundation of China(22075043,21875034,61704093)。
文摘A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which has a unique temperature-dependent backward energy transfer process from selftrapped state to^(4)T_(1)energy level of Mn,is used for triggering the temperature alarm.The LSC with redemitted CsPbI_(3)perovskite-polymer composite films on the glass substrate is used for power supply.The spectrally separated nature between the green-emitted OMHs for temperature alarm and red-emitted CsPbI3in LSC for power supply allows for probing the signal light of temperature-responsive OMHs without the interference of LSCs,making it possible to calibrate the temperature visually just by a self-powered brightness detection circuit with LED indicators.Taking advantage of LSC without hot spot effects plaguing the solar cells,as-prepared temperature alarm system can operate well on both sunny and cloudy day.
文摘In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emission from the quantum level n+1 to level n can be deduced from the orbital angular momentum examined in the hydrogen atom. This time is found precisely equal to the time interval dictated by the Joule-Lenz law governing the electron transition between the levels n+1 and n. In the next step, the mechanical parameters entering the quantum systems are applied in calculating the time intervals characteristic for the electron transitions. This concerns the neighbouring energy levels in the hydrogen atom as well as the Landau levels in the electron gas submitted to the action of a constant magnetic field.
文摘The energy utilization consistency method in process integration extracts the key component of process energy utilization, and simplifies the procedure of process analysis and integration. The method allows the conversion of the total process energy integration into a synthesis problem of a pseudo-heat exchanger network. The advantages of using the energy utilization consistency and the pseudo-temperature methods are presented by two examples of integration of large-scale complex processes. The improved genetic algorithm is proved to be an effective tool in the retrofitting procedures.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11105062 and 11265014the Fundamental Research Funds for the Central Universities under Grant Nos LZUJBKY-2011-57 and LZUJBKY-2015-119
文摘Energy efficiency is closely related to the evolution of biological systems and is important to their information processing. In this work, we calculate the excitation probability of a simple model of a bistable biological unit in response to pulsatile inputs, and its spontaneous excitation rate due to noise perturbation. Then we analytically calculate the mutual information, energy cost, and energy efficiency of an array of these bistable units. We find that the optimal number of units could maximize this array＇s energy efficiency in encoding pulse inputs, which depends on the fixed energy cost. We conclude that demand for energy efficiency in biological systems may strongly influence the size of these systems under the pressure of natural selection.
基金Supported by the Chinese ITER Plan Project Foundation under Grant Nos 2013GB113001 and 2015GB105001the National Natural Science Foundation of China under Grant No 11575056
文摘During the tokamak operation,variation of the stored energy can cause internal perturbations of the plasma.These perturbations may develop into large-scale vertical movement of the whole column for the vertically elon-gated tokamak,eventually generating the hot vertical displacement event(VIDE,).It will cause considerable damage to the machine.In this work,the hot VDE process due to stored energy perturbations is investigated by a mature non-linear time-evolution code DINA.The influence on the vertical instability,the displacement direction and the electromagnetic loads on in-vessel components during the hot VDE are analyzed.It is shown that a larger perturbation leads to faster development of the vertical instability.Meanwhile the variation of the Shafranov shift,due to the energy change,is related to the VDE direction.The vertical electromagnetic force on the vacuum vessel and the halo current flowing in the divertor baffle become larger in the case of VDE moving towards the X point.
文摘On July 16, 2013, the first low-E energy saving glass deep processing line of Hubei Zhongyi Glass Co., Ltd. was put into production in Changyang County of Hubei Province. Low-E glass is a kind of new glass featured with good lighting, thermal insulation, and ultraviolet radiation resistance. So far contracts worth about CNY 50 million have been signed.
文摘Porosity is a common phenomenon and can significantly hinder the quality of the coating.Here,the pore formation mechanism and the characteristics of the single tracks of the W-C coating using directed energy deposition(DED)are systematically investigated.The forming quality of the tracks,the distribution of the pores,and the elemental distribution near the pores are analyzed by the observations of the cross-sections of the tracks.The temperature field of the melt pool is discussed comprehensively to reveal the pore formation mechanism.The results confirm that Ni and Co evaporated during the DED process due to the high temperature of the melt pool.Pores were continuously produced adjacent to the fusion line when the melt pool was about to solidify since the temperature at the solidification front was higher than the boiling point of Ni.The vaporization area at the fusion line was proposed,where Ni could also evaporate at the time the melt pool started to solidify.The relationship between the solidification rate,the size of the vaporization area and the DED parameters(laser power and scanning speed)was established to discuss the causes of severe pores above the fusion line.This work contains a practical guide to reduce or eliminate the porosity in the coating preparation process on the surface of the tungsten alloy.
基金supported by the State Key Program of National Natural Science of China (Grant No. 40830957)
文摘With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.
基金supported by the National Science Foundation of China (Grant no. 51408419)the National Key Technology Research and Development Program of China (Grant nos. 2014BAL02B02-03 and 2014BAC29B01)the Key Program for International S&T Cooperation Projects of China (Grant no. 2012DFG91380)
文摘As an important intermediate product, short-chain fatty acids（SCFAs） can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion process. In order to obtain more SCFA and methane,most studies in literatures were centered on enhancing the hydrolysis of sludge anaerobic digestion which was proved as un-efficient. Though the alkaline pretreatment in our previous study increased both the hydrolysis and acidification processes, it had a vast chemical cost which was considered uneconomical. In this paper, a low energy consumption pretreatment method, i.e. enhanced the whole three stages of the anaerobic fermentation processes at the same time, was reported, by which hydrolysis and acidification were both enhanced, and the SCFA and methane generation can be significantly improved with a small quantity of chemical input. Firstly, the effect of different pretreated temperatures and pretreatment time on sludge hydrolyzation was compared. It was found that sludge pretreated at 100°C for 60 min can achieve the maximal hydrolyzation. Further, effects of different initial p Hs on acidification of the thermal pretreated sludge were investigated and the highest SCFA was observed at initial p H 9.0with fermentation time of 6 d, the production of which was 348.63 mg COD/g VSS（6.8 times higher than the blank test） and the acetic acid was dominant acid. Then, the mechanisms for this new pretreatment significantly improving SCFA production were discussed. Finally,the effect of this low energy consumption pretreatment on methane generation was investigated.
基金provided by the Fundamental Research Funds for the Central Universities(No.2014QNA80)the Project funded by China Postdoctoral Science Foundation(No.2014M550315)+2 种基金a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China(No.11202108)the Natural Science Foundation of Jiangsu Province(No.BK20140189)
文摘In order to investigate the effect of water content on the energy evolution of red sandstone, the axial loading–unloading experiments on dry and water-saturated sandstone samples were conducted, and the distribution and evolution of elastic energy and dissipated energy within the rock were measured.The results show that the saturation process from dry to fully-saturated states reduces the strength, rigidity and brittleness of the rock by 30.2%, 25.5% and 16.7%, respectively. The water-saturated sample has larger irreversible deformation in the pre-peak stage and smaller stress drop in the post-peak stage.The saturation process decreases the accumulation energy limit by 38.9%, but increases the dissipated energy and residual elastic energy density, thus greatly reducing the magnitude and rate of energy release. The water-saturated sample has lower conversion efficiency to elastic energy by 3% in the prepeak region; moreover, the elastic energy ratio falls with a smaller range in the post-peak stage.Therefore, saturation process can greatly reduce the risk of dynamic disaster, and heterogeneous water content can lead to dynamic disaster possibly on the other hand.
基金Supported by the National Natural Science Foundation of China(21406124)
文摘A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.
基金supported by National Natural Science Foundation of China(No.11505015)the National High-Tech Research and Development Program of China(863 Program)
文摘This paper investigates the electron-vibrational（e-V）energy exchange in nitrogencontaining plasma,which is very efficient in the case of gas discharge and high speed flow.Based on Harmonic oscillator approximation and the assumption of the e-V relaxation through a continuous series of Boltzmann distributions over the vibrational states,an analytic approach is derived from the proposed scaling relation of e-V transition rates.A full kinetic model is then investigated by numerically solving the state-to-state master equation for all vibrational levels.The analytical approach leads to a Landau-Teller（LT）-type equation for relaxation of vibrational energy,and predicts the relaxation time on the right order of magnitude.By comparison with the kinetic model,the LT-type equation is valid in typical electron temperatures in gas discharge.However,the analytical approach is not capable of describing the vibrational distribution function during the e-V process in which a full kinetic model is required.
基金partially supported by the National Natural Science Foundation of China (71471138)
文摘The grand challenges of climate change demand a new paradigm of urban design that takes the perfor- mance of urban systems into account, such as energy and water efficiency. Traditional urban design methods focus on the form-making process and lack performance dimensions. Geodesign is an emerging approach that emphasizes the links between systems thinking, digital technology, and geographic con- text. This paper presents the research results of the first phase of a larger research collaboration and pro- poses an extended geodesign method for a district-scale urban design to integrate systems of renewable energy production, energy consumption, and storm water management, as well as a measurement of human experiences in cities. The method incorporates geographic information system （GIS）, parametric modeling techniques, and multidisciplinary design optimization （MDO） tools that enable collaborative design decision-making. The method is tested and refined in a test case with the objective of designing a near-zero-energy urban district. Our final method has three characteristics. （1） Integrated geodesign and parametric design： It uses a parametric design approach to generate focal-scale district prototypes by means of a custom procedural algorithm, and applies geodesign to evaluate the performances of design proposals. （2） A focus on design flow： It elaborates how to define problems, what information is selected, and what criteria are used in making design decisions. （3） Multi-objective optimization： The test case produces indicators from performance modeling and derives principles through a multi-objective computational experiment to inform how the design can be improved. This paper concludes with issues and next steps in modeling urban design and infrastructure systems based on MDO tools.
基金Supported by the National Natural Science Foundation of China(61374166,6153303)the Doctoral Fund of Ministry of Education of China(20120010110010)the Fundamental Research Funds for the Central Universities(YS1404,JD1413,ZY1502)
文摘Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.
基金Supported by the National Key Research and Development Program of China(2022YFC2807203 and 2022YFC3702001-03)Second Tibetan Plateau Scientific Expedition and Research(STEP)Program(2019QZKK0105)+1 种基金National Natural Science Foundation of China(41830968)Planning Project of Institute of Atmospheric Physics,Chinese Academy of Sciences(E268091801).
文摘Under Arctic warming,near-surface energy transfers have significantly changed,but few studies have focused on energy exchange over Arctic glacier due to limitations in available observations.In this study,the atmospheric energy exchange processes over the Arctic glacier surface were analyzed by using observational data obtained in summer 2019 in comparison with those over the Arctic tundra surface.The energy budget over the glacier greatly differed from that over the tundra,characterized by less net shortwave radiation and downward sensible heat flux,due to the high albedo and icy surface.Most of the incoming solar radiation was injected into the glacier in summer,leading to snow ice melting.During the observation period,strong daily variations in near-surface heat transfer occurred over the Arctic glacier,with the maximum downward and upward heat fluxes occurring on 2 and 6 July 2019,respectively.Further analyses suggested that the maximum downward heat flux is mainly caused by the strong local thermal contrast above the glacier surface,while the maximum upward heat transfer cannot be explained by the classical turbulent heat transfer theory,possibly caused by countergradient heat transfer.Our results indicated that the near-surface energy exchange processes over Arctic glacier may be strongly related to local forcings,but a more in-depth investigation will be needed in the future when more observational data become available.
