Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with ...Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.展开更多
The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commer...The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commercial coal-water slurry gasifiers with their corresponding gasification coal samples and the corroded refractory bricks in the slag tapping hole of the gasifier.The slag characteristic,including crystallization and viscosity-temperature of four gasification coal samples were analyzed.The results revealed that the low viscosity slag could lead to more severe damage to refractory bricks.Given the risk of slag crystallization,it is recommended to establish a safe slag tapping temperature range should be set as tICT(initial crystallization temperature)−t_(2.5) when tICT is higher than t_(25).Upon examining interior morphology of these corroded refractory bricks,some cracks were observed within them.The chemical composition of molten slag was analyzed using SEM-EDS.However,XRD results found no spinel containing zirconium in these cracks.This suggests that the emergence of these cracks are mainly attributed to the molten slag penetration and the subsequent reaction with the refractory material.The difference in thermal expansion between the newly formed substances and refractory material is critical in forming these cracks.Furthermore,SEM-EDS analysis was also conducted on the slag-aggregate and the slag-matrix interface.The results reveal that the reduction in Cr_(2)O_(3) content is the earliest characteristic of damage in high chromia refractories.A proposed damage mechanism of refractory brick suggests that the matrix and aggregate of high chromia refractory are initially compromised because of the reduced Cr_(2)O_(3) content.Subsequently,the molten slag penetrates the interior of the refractory brick,forming new substances,leading to damage caused by the difference in thermal expansion between the new substances and the refractory brick.Understanding and preventing the reduction of Cr_(2)O_(3) content is vital to prolonging the service life of refractory brick in the slag tapping hole of the gasifier based on this damage mechanism.展开更多
In this study,thyme essential oil(TEO)nanoemulsion(tPTNs)was constructed with transglutaminase(TGase)-modified potato protein,and its antibacterial activity and mechanism of action were evaluated and explored.Results ...In this study,thyme essential oil(TEO)nanoemulsion(tPTNs)was constructed with transglutaminase(TGase)-modified potato protein,and its antibacterial activity and mechanism of action were evaluated and explored.Results indicated that tPTNs exhibited great antibacterial activity against both Staphylococcus aureus and Escherichia coli,with minimal inhibitory concentration(MIC)and minimum bactericidal concentration(MBC)of 2.5 and 5.0 mg/mL,respectively.Also,the antibacterial effects of tPTNs were concentration-dependent.We observed a significant decrease in the absolute value of the zeta potential,and significant increases in particle size,cell membrane hydrophobicity,conductivity,the release of metal ions,and the leakage of nucleic acid as the concentration of tPTNs increased from 0 mg/mL to MBC.Furthermore,sodium dodecyl sulphate-polyacrylamide gel electrophoresis(SDS-PAGE)demonstrated that protein synthesis was inhibited or even disrupted.Analysis by liquid chromatography-mass spectrometry(LC-MS)indicated that treatment with tPTNs caused significant changes in bacterial metabolites,1117 and 692 differential metabolites being found for S.aureus and E.coli,respectively.The differential metabolites were involved in nucleotide metabolism,amino acid metabolism,tricarboxylic acid cycle and other metabolic pathways.These findings provide valuable insights for the application of thyme essential oil as an efficient antibacterial agent and for the understanding of its mechanism of action.展开更多
The multi-principal element characteristic of high-entropy alloys has revolutionized the conventional alloy design concept of single-principal element,endowing them with excellent mechanical properties.However,owing t...The multi-principal element characteristic of high-entropy alloys has revolutionized the conventional alloy design concept of single-principal element,endowing them with excellent mechanical properties.However,owing to this multi-principal element nature,high-entropy alloys exhibit complex deformation behavior dominated by alternating and coupled deformation mechanisms.Therefore,elucidating these intricate deformation mechanisms remains a key challenge in current research.Neutron diffraction(ND)techniques offer distinct advantages over traditional microscopic methods for characterizing such complex deformation behavior.The strong penetration capability of neutrons enables in-situ,real-time,and non-destructive detection of structural evolution in most centimeter-level bulk samples under complex environments,and ND allows precise characterization of lattice site occupations for light elements,such as C and O,and neighboring elements.This review discussed the principles of ND,experiment procedures,and data analysis.Combining with recent advances in the research about face-centered cubic high-entropy alloy,typical examples of using ND to investigate the deformation behavior were summarized,ultimately revealing deformation mechanisms dominated by dislocations,stacking faults,twinning,and phase transformations.展开更多
Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical propert...Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical properties.In practice applications,the components of functional nanodevices are subjected to mechanical stress,which can affect the robust performance and structural reliability of these devices.Therefore,it is imperative to explore the mechanical properties and underlying mechanisms of 2D materials.However,researchers have an inadequate understanding of the accuracy of various in situ microscopy techniques and neglect the significance of high-quality,clean transfer techniques,resulting in deviated measurement results.There is now an urgent need to develop guidelines that allow researchers to select appropriate material transfer techniques and mechanical testing strategies based on the specific properties of 2D materials.Furthermore,the mechanical mechanism of 2D materials lacks systematic and comprehensive studies,which hinders researchers from deeply understanding the relationship between the material structure and the device performance.This work reviews the latest progress in the mechanics of 2D materials,focusing on the challenges of various transfer techniques and in situ microscopy techniques in mechanical testing,and provides effective guidance for the formulation of experimental schemes for mechanical testing.In addition,we offer detailed mechanistic insights into the fracture behavior,geometric dimension effects,edge defects,and interlayer bonding effects of 2D materials.This work is expected to advance the field development of 2D material mechanics.展开更多
The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification...The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification combined with hot-press sintering and extrusion.The optimized alloy exhibited yield and ultimate tensile strengths of 283 MPa and 306 MPa under quasi-static loading,respectively,while retaining a uniform elongation of 6%.Multiscale microstructural characterization via XRD,SEM-EBSD,and TEM revealed that rapid solidification induced remarkable grain refinement and precipitate redistribution.Subsequent thermomechanical processing achieved full dynamic recrystallization with refined grains.Crucially,the rapid solidification kinetics notably altered Al partitioning,favoring solid solution in magnesium phase over precipitation in lithium phase.These microstructural modifications activate synergistic strengthening mechanisms:1)Hall-Petch hardening from grain refinement,2)dispersion strengthening via nano-precipitates,3)dislocation strengthening from substructures,and 4)solid solution effects from Al supersaturation.This work establishes a microstructure design paradigm for high-performance Mg-Li alloys through coupled rapid solidification and thermomechanical processing.展开更多
Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ...Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
Regulatory T cells,a subset of CD4^(+)T cells,play a critical role in maintaining immune tolerance and tissue homeostasis due to their potent immunosuppressive properties.Recent advances in research have highlighted t...Regulatory T cells,a subset of CD4^(+)T cells,play a critical role in maintaining immune tolerance and tissue homeostasis due to their potent immunosuppressive properties.Recent advances in research have highlighted the important therapeutic potential of Tregs in neurological diseases and tissue repair,emphasizing their multifaceted roles in immune regulation.This review aims to summarize and analyze the mechanisms of action and therapeutic potential of Tregs in relation to neurological diseases and neural regeneration.Beyond their classical immune-regulatory functions,emerging evidence points to non-immune mechanisms of regulatory T cells,particularly their interactions with stem cells and other non-immune cells.These interactions contribute to optimizing the repair microenvironment and promoting tissue repair and nerve regeneration,positioning non-immune pathways as a promising direction for future research.By modulating immune and non-immune cells,including neurons and glia within neural tissues,Tregs have demonstrated remarkable efficacy in enhancing regeneration in the central and peripheral nervous systems.Preclinical studies have revealed that Treg cells interact with neurons,glial cells,and other neural components to mitigate inflammatory damage and support functional recovery.Current mechanistic studies show that Tregs can significantly promote neural repair and functional recovery by regulating inflammatory responses and the local immune microenvironment.However,research on the mechanistic roles of regulatory T cells in other diseases remains limited,highlighting substantial gaps and opportunities for exploration in this field.Laboratory and clinical studies have further advanced the application of regulatory T cells.Technical advances have enabled efficient isolation,ex vivo expansion and functionalization,and adoptive transfer of regulatory T cells,with efficacy validated in animal models.Innovative strategies,including gene editing,cell-free technologies,biomaterial-based recruitment,and in situ delivery have expanded the therapeutic potential of regulatory T cells.Gene editing enables precise functional optimization,while biomaterial and in situ delivery technologies enhance their accumulation and efficacy at target sites.These advancements not only improve the immune-regulatory capacity of regulatory T cells but also significantly enhance their role in tissue repair.By leveraging the pivotal and diverse functions of Tregs in immune modulation and tissue repair,regulatory T cells–based therapies may lead to transformative breakthroughs in the treatment of neurological diseases.展开更多
Curcuma is a traditional Chinese medicine that has been utilized for centuries in the treatment of various diseases. Terpenoids, particularly monoterpenes and sesquiterpenes, constitute the primary bioactive component...Curcuma is a traditional Chinese medicine that has been utilized for centuries in the treatment of various diseases. Terpenoids, particularly monoterpenes and sesquiterpenes, constitute the primary bioactive components of the essential oil derived from Curcuma species.Among these, curdione—one of the key active constituents—has been identified in 25 Curcuma species, with the highest concentration reported in the rhizome essential oil of Curcuma trichosantha Gagnep. Curdione can also be synthesized through chemical methods,and its regio-and stereo-selectivity can be further optimized via chemo-bio transformations.This compound demonstrates significant therapeutic potential, including anticancer, antithrombotic, anti-inflammatory, anti-viral, anti-fungal, anti-diabetic, and multi-organ protective properties. Despite these promising biological activities, its clinical application is hindered by poor water solubility and potential toxicity. This review summarizes current knowledge on the natural sources, chemical synthesis, chemo-bio transformations, metabolism, pharmacokinetics, pharmacological effects, potential toxicities, and molecular mechanisms of curdione. Furthermore, perspectives on future drug development are discussed with the aim of promoting the clinical translation of this promising natural compound.展开更多
Anthocyanin-rich foliage plants hold important applications in the pharmaceutical industry and the tea sector,beyond their significant ornamental value.These plants also possess biological and ecological importance,co...Anthocyanin-rich foliage plants hold important applications in the pharmaceutical industry and the tea sector,beyond their significant ornamental value.These plants also possess biological and ecological importance,contributing to reproduction,defense against natural enemies,and adaptation to environmental changes.Thus,a deeper understanding of their leaf coloration will be essential for both practical applications and theoretical understanding.The present study comprehensively reviews the factors influencing anthocyanin metabolism,including biosynthesis,transport,degradation,transcription factors(TF_(S)),post-transcriptional regulation,post translation regulation.Next,we summarize the application of omics technologies in unveiling the mechanisms of anthocyanin synthesis in leaves.Furthermore,we review the molecular mechanisms by which environmental factors regulate leaf coloration by inducing anthocyanin biosynthesis.Lastly,the study addresses unresolved issues in the research of plant leaf coloration and proposes future research directions in this field.This study is anticipated to provide a valuable reference for the study of plant leaf coloration.展开更多
As a crucial aspect of international governance,international standardization requires legitimacy grounded in the principles and frameworks established by international law.Building upon an understanding of the common...As a crucial aspect of international governance,international standardization requires legitimacy grounded in the principles and frameworks established by international law.Building upon an understanding of the commonalities between international law and international standardization,this paper explores the mechanism through which international law centered on treaties empowers international standardization.展开更多
Probiotics can regulate the body’s immune system through both non-specific and specific immunity,thereby regulating host health.In terms of non-specific immune regulation,probiotics can activate the intrinsic immune ...Probiotics can regulate the body’s immune system through both non-specific and specific immunity,thereby regulating host health.In terms of non-specific immune regulation,probiotics can activate the intrinsic immune system,regulate the mucosal barrier function,and play an immune role by influencing the activity of intrinsic immune cells such as macrophages,dendritic cells and natural killer cells,as well as their differentiation and maturation;in terms of specific immune regulation,probiotics play a role in regulating the immunoglobulin level and the maturation of B cells.Probiotics can also regulate T-cell differentiation according to the condition of the body,thus regulating specific immunity.Many studies have focused on the role of probiotics in metabolism and nutrition,and the mechanisms involved in the immunomodulatory role of probiotics have only been partially described.This review summarises the role of common probiotics such as Lactobacillus plantarum and Lactobacillus rhamnosus in immunomodulation as well as their mechanisms,describing the currently known mechanisms of immunomodulation by probiotics in improving the host immune system.A deeper understanding of probiotics and their specific mechanisms of action will facilitate the use of probiotics for immunomodulation in clinical medicine,functional foods,and other areas.This will also contribute to the development and research of engineered probiotics,next-generation probiotics,and other new functional probiotics with immunomodulatory effects.展开更多
In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain...In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.展开更多
The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerge...The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.展开更多
The antioxidant activity of selenium-containing soybean peptides(SePPs)has been previously demonstrated,despite their limited absorption in the small intestine.This study investigates the antioxidant mechanism of a se...The antioxidant activity of selenium-containing soybean peptides(SePPs)has been previously demonstrated,despite their limited absorption in the small intestine.This study investigates the antioxidant mechanism of a selenium-containing tetrapeptide,Ser-Phe-Gln-SeM(SFQSeM),identified from SePPs,with particular emphasis on its interaction with the intestinal microbiota and its role in modulating host antioxidant defenses.The effects of SFQSeM were evaluated in a D-galactose-induced oxidative stress model and an antibiotictreated mouse model.SFQSeM supplementation significantly reduced the oxidative stress in D-galactosetreated mice.It also promoted the growth of beneficial bacteria and increased the levels of acetate,butyrate and lactate in the intestine(P<0.05).In the antibiotic-treated mouse model,depletion of the intestinal microbiota significantly reduced hepatic glutathione peroxidase(GSH-Px)activity(26.6%)and glutathione peroxidase 1(GPx-1)expression(48.77%)compared to normal mice supplemented with SFQSeM(P<0.05).In contrast to Na_(2)SeO_(3)and selenomethionine,SFQSeM effectively restored the diversity of the intestinal microbiota disrupted by antibiotics.Lactobacillus,Lachnospiraceae_NK4A136_group,and Muribaculaceae were identified as predominant bacteria in the SFQSeM group,and were strongly associated with increased hepatic GSH-Px activity and GPx-1 mRNA expression(P<0.05).In conclusion,intestinal microbiota enhances the antioxidant efficacy of SFQSeM by modulating microbial composition,producing active metabolites,and converting SFQSeM into a bioactive form of selenium.展开更多
The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous r...The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous reactions,and heterogeneous reactions of 300 species,which is adequate for both box model and climate transport model(CTM)applications.Detailed chemical processes of chlorine chemistry,chemistry of Criegee intermediates,and heterogeneous uptake of HO_(2) and N_(2)O_(5) have been implemented and updated.With this level of explicitness,MAX1 can support investigations into the quantification of secondary pollutant productions and the chemical behavior of the crucial intermediates,such as organic peroxy radicals.Box model and CTM tests were conducted to evaluate the performance of MAX1 from different perspectives.Simulations of MAX1 successfully captured the variation of ozone in all cases tested.Meanwhile,significant improvement was made on predictions of radicals compared to other mechanisms,especially under the low NO_(x) environment,with good similarity to simulations of a nearly explicit chemical mechanism(i.e.,Master Chemical Mechanism)that contains over 17000 reactions.The computational expense of MAX1 is acceptable and it can be applied in atmospheric scientific research and air quality prediction.MAX1 introduces new dimensions in atmospheric chemistry modeling,and its potential application in policymaking is a promising yet exploratory step.It offers improved insights into air quality dynamics,which could assist policymakers in making more informed decisions.However,the translation of its detailed chemical understanding into practical strategies remains an area for further investigation.This model suggests a path towards more nuanced air pollution control methods,contributing to ongoing efforts in environmental management.展开更多
The blood-brain barrier(BBB)is a major challenge in drug delivery for the treatment of central nervous system diseases.Walnut derived peptide TWLPLPR(TW-7)has been proved to promote neuronal mitochondrial autophagy an...The blood-brain barrier(BBB)is a major challenge in drug delivery for the treatment of central nervous system diseases.Walnut derived peptide TWLPLPR(TW-7)has been proved to promote neuronal mitochondrial autophagy and enhance hippocampal neuronal synaptic plasticity,thereby improving learning and memory abilities in mice.We investigated the internalization mechanism and intracellular transport pathway for the walnut-derived peptide,TW-7,using b End.3 cells in an in vitro BBB model system.TW-7 was taken up by the b End.3 cells in a concentration-,temperature-,and energy-dependent manner;this involved increases in caveolin-1 and caveolin-2 protein expression and phosphorylation and inhibition of P-glycoprotein-mediated efflux.Subcellular localization of TW-7 in b End.3 cells was observed,indicating that the plasma membrane,endoplasmic reticulum,Golgi apparatus,lysosomes,and mitochondria participated in intracellular trafficking and that the peptide escaped from lysosomes over time.Caveolae may be critical for TW-7 uptake by brain microvascular endothelial cells,assisting TW-7 to cross the BBB.The results of this study provide a theoretical basis for the mechanism of active peptide penetrating the BBB,and provide a reference for developing neuroprotective active peptide products.展开更多
The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and mode...The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and modeling,the result reveals that the corrosion leads to grain refinement and a reduction in the proportion of low-angle grain boundaries.Notably,corrosion promotes austenite enrichment(increasing from 1.8%to 13.9%)through selective dissolution of the martensitic matrix,while repetitive impacts reverse this trend(reducing to 0.1%)through stress-induced martensitic transformation.Fracture analysis demonstrates corrosion-induced ductile-to-brittle transition,with quasi-cleavage features dominating after prolonged corrosion.A physics-based dynamic yield strength model with<3%prediction error relative to impact tests is developed.These findings establish microstructure-property relationships of AerMet 100 steel under multi-field coupling,providing critical guidance for designing corrosion-resistant ultrahigh-strength steels in marine-impact environments.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
基金supported by the National Science Foundation for Distinguished Young Scholars of China(No.52325506)the Fundamental Research Funds for the Central Universities(No.DUT22LAB501)。
文摘Ultrasonic-Assisted Grinding(UAG)is a novel manufacturing technology that shows promising promise for use in processing Ceramic Matrix Composites(CMCs).Nevertheless,analyzing the material removal process of CMCs with multidirectional structure during UAG is challenging,impeding the progress and improvement of the UAG process.This work examined the impact of ultrasonic vibration on the dynamic mechanical characteristics during processing.Additionally,we experimentally elucidated the material removal mechanism of CMCs during the scratching process under the influence of vertical vibration.The results indicate that the introduction of ultrasonic vibration causes a strain rate effect,resulting in a modification of the material removal mechanism,subsequently impacting the processing quality.Ultrasonic vibration increases the dynamic strength and brittleness of the fibers in CMCs,leading to more cracks at fracture,which changes from the original bending fracture to shear fracture.In addition,ultrasonic vibration can effectively inhibit the impact of scratching depth and anisotropy on the removal mechanism of CMCs,resulting in a more uniform surface of CMCs after processing.
基金Supported by Carbon Neutrality and Energy System Transformation (CNEST) ProgramScience and Technology Innovation Project of CHN Energy (GJNY-24-26)。
文摘The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commercial coal-water slurry gasifiers with their corresponding gasification coal samples and the corroded refractory bricks in the slag tapping hole of the gasifier.The slag characteristic,including crystallization and viscosity-temperature of four gasification coal samples were analyzed.The results revealed that the low viscosity slag could lead to more severe damage to refractory bricks.Given the risk of slag crystallization,it is recommended to establish a safe slag tapping temperature range should be set as tICT(initial crystallization temperature)−t_(2.5) when tICT is higher than t_(25).Upon examining interior morphology of these corroded refractory bricks,some cracks were observed within them.The chemical composition of molten slag was analyzed using SEM-EDS.However,XRD results found no spinel containing zirconium in these cracks.This suggests that the emergence of these cracks are mainly attributed to the molten slag penetration and the subsequent reaction with the refractory material.The difference in thermal expansion between the newly formed substances and refractory material is critical in forming these cracks.Furthermore,SEM-EDS analysis was also conducted on the slag-aggregate and the slag-matrix interface.The results reveal that the reduction in Cr_(2)O_(3) content is the earliest characteristic of damage in high chromia refractories.A proposed damage mechanism of refractory brick suggests that the matrix and aggregate of high chromia refractory are initially compromised because of the reduced Cr_(2)O_(3) content.Subsequently,the molten slag penetrates the interior of the refractory brick,forming new substances,leading to damage caused by the difference in thermal expansion between the new substances and the refractory brick.Understanding and preventing the reduction of Cr_(2)O_(3) content is vital to prolonging the service life of refractory brick in the slag tapping hole of the gasifier based on this damage mechanism.
文摘In this study,thyme essential oil(TEO)nanoemulsion(tPTNs)was constructed with transglutaminase(TGase)-modified potato protein,and its antibacterial activity and mechanism of action were evaluated and explored.Results indicated that tPTNs exhibited great antibacterial activity against both Staphylococcus aureus and Escherichia coli,with minimal inhibitory concentration(MIC)and minimum bactericidal concentration(MBC)of 2.5 and 5.0 mg/mL,respectively.Also,the antibacterial effects of tPTNs were concentration-dependent.We observed a significant decrease in the absolute value of the zeta potential,and significant increases in particle size,cell membrane hydrophobicity,conductivity,the release of metal ions,and the leakage of nucleic acid as the concentration of tPTNs increased from 0 mg/mL to MBC.Furthermore,sodium dodecyl sulphate-polyacrylamide gel electrophoresis(SDS-PAGE)demonstrated that protein synthesis was inhibited or even disrupted.Analysis by liquid chromatography-mass spectrometry(LC-MS)indicated that treatment with tPTNs caused significant changes in bacterial metabolites,1117 and 692 differential metabolites being found for S.aureus and E.coli,respectively.The differential metabolites were involved in nucleotide metabolism,amino acid metabolism,tricarboxylic acid cycle and other metabolic pathways.These findings provide valuable insights for the application of thyme essential oil as an efficient antibacterial agent and for the understanding of its mechanism of action.
基金National Key R&D Program of China(2023YFB3711904,2022YFA1603801)National Natural Science Foundation of China(12404230,52471181,52301213,52130108,52471005)+2 种基金National Nature Science Foundation of Zhejiang Province(LY23E010002)Open Fund of the China Spallation Neutron Source,Songshan Lake Science City(KFKT2023B11)Guangdong Basic and Applied Basic Research Foundation(2022A1515110805,2024A1515010878)。
文摘The multi-principal element characteristic of high-entropy alloys has revolutionized the conventional alloy design concept of single-principal element,endowing them with excellent mechanical properties.However,owing to this multi-principal element nature,high-entropy alloys exhibit complex deformation behavior dominated by alternating and coupled deformation mechanisms.Therefore,elucidating these intricate deformation mechanisms remains a key challenge in current research.Neutron diffraction(ND)techniques offer distinct advantages over traditional microscopic methods for characterizing such complex deformation behavior.The strong penetration capability of neutrons enables in-situ,real-time,and non-destructive detection of structural evolution in most centimeter-level bulk samples under complex environments,and ND allows precise characterization of lattice site occupations for light elements,such as C and O,and neighboring elements.This review discussed the principles of ND,experiment procedures,and data analysis.Combining with recent advances in the research about face-centered cubic high-entropy alloy,typical examples of using ND to investigate the deformation behavior were summarized,ultimately revealing deformation mechanisms dominated by dislocations,stacking faults,twinning,and phase transformations.
基金National Natural Science Foundation of China(Grant.Nos.52422505,12274124)the Shanghai Pilot Program for Basic Research(Grant.No.22TQ14001006)+2 种基金National Natural Science Foundation of China(Grant No.52275149)the Scientific Research Innovation Capability Support Project for Young Faculty(Grant No.ZYGXQNJSKYCXNLZCXM-D5)Innovative Research Group Project of the National Natural Science Foundation of China(Grant.No.52321002)。
文摘Two-dimensional(2D)materials have attracted extensive attention from aerospace,integrated circuits,precision sensors,and flexible electronics due to their unique layered structure and excellent physicochemical properties.In practice applications,the components of functional nanodevices are subjected to mechanical stress,which can affect the robust performance and structural reliability of these devices.Therefore,it is imperative to explore the mechanical properties and underlying mechanisms of 2D materials.However,researchers have an inadequate understanding of the accuracy of various in situ microscopy techniques and neglect the significance of high-quality,clean transfer techniques,resulting in deviated measurement results.There is now an urgent need to develop guidelines that allow researchers to select appropriate material transfer techniques and mechanical testing strategies based on the specific properties of 2D materials.Furthermore,the mechanical mechanism of 2D materials lacks systematic and comprehensive studies,which hinders researchers from deeply understanding the relationship between the material structure and the device performance.This work reviews the latest progress in the mechanics of 2D materials,focusing on the challenges of various transfer techniques and in situ microscopy techniques in mechanical testing,and provides effective guidance for the formulation of experimental schemes for mechanical testing.In addition,we offer detailed mechanistic insights into the fracture behavior,geometric dimension effects,edge defects,and interlayer bonding effects of 2D materials.This work is expected to advance the field development of 2D material mechanics.
基金supported by The National Natural Science Foundation of China(Grant No.62204197)the Key R&D and Transformation Plan of Science and Technology Department of Qinghai Province(Grant No.2022-GX-156)Xi'an Association for Science and Technology(Grant No.959202313058).
文摘The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification combined with hot-press sintering and extrusion.The optimized alloy exhibited yield and ultimate tensile strengths of 283 MPa and 306 MPa under quasi-static loading,respectively,while retaining a uniform elongation of 6%.Multiscale microstructural characterization via XRD,SEM-EBSD,and TEM revealed that rapid solidification induced remarkable grain refinement and precipitate redistribution.Subsequent thermomechanical processing achieved full dynamic recrystallization with refined grains.Crucially,the rapid solidification kinetics notably altered Al partitioning,favoring solid solution in magnesium phase over precipitation in lithium phase.These microstructural modifications activate synergistic strengthening mechanisms:1)Hall-Petch hardening from grain refinement,2)dispersion strengthening via nano-precipitates,3)dislocation strengthening from substructures,and 4)solid solution effects from Al supersaturation.This work establishes a microstructure design paradigm for high-performance Mg-Li alloys through coupled rapid solidification and thermomechanical processing.
基金Funded by the National Science Foundation of China(No.52368031)the China Postdoctoral Science Foundation(No.2022M713497)+1 种基金the Jiangxi Provincial Natural Science Foundation(No.20252BAC250115)the Jiangxi Provincial Department of Transportation Science and Technology Project(No.2022H0017)。
文摘Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
基金supported by the National Natural Science Foundation of China,Nos.32271389,31900987(both to PY)the Natural Science Foundation of Jiangsu Province,No.BK20230608(to JJ)。
文摘Regulatory T cells,a subset of CD4^(+)T cells,play a critical role in maintaining immune tolerance and tissue homeostasis due to their potent immunosuppressive properties.Recent advances in research have highlighted the important therapeutic potential of Tregs in neurological diseases and tissue repair,emphasizing their multifaceted roles in immune regulation.This review aims to summarize and analyze the mechanisms of action and therapeutic potential of Tregs in relation to neurological diseases and neural regeneration.Beyond their classical immune-regulatory functions,emerging evidence points to non-immune mechanisms of regulatory T cells,particularly their interactions with stem cells and other non-immune cells.These interactions contribute to optimizing the repair microenvironment and promoting tissue repair and nerve regeneration,positioning non-immune pathways as a promising direction for future research.By modulating immune and non-immune cells,including neurons and glia within neural tissues,Tregs have demonstrated remarkable efficacy in enhancing regeneration in the central and peripheral nervous systems.Preclinical studies have revealed that Treg cells interact with neurons,glial cells,and other neural components to mitigate inflammatory damage and support functional recovery.Current mechanistic studies show that Tregs can significantly promote neural repair and functional recovery by regulating inflammatory responses and the local immune microenvironment.However,research on the mechanistic roles of regulatory T cells in other diseases remains limited,highlighting substantial gaps and opportunities for exploration in this field.Laboratory and clinical studies have further advanced the application of regulatory T cells.Technical advances have enabled efficient isolation,ex vivo expansion and functionalization,and adoptive transfer of regulatory T cells,with efficacy validated in animal models.Innovative strategies,including gene editing,cell-free technologies,biomaterial-based recruitment,and in situ delivery have expanded the therapeutic potential of regulatory T cells.Gene editing enables precise functional optimization,while biomaterial and in situ delivery technologies enhance their accumulation and efficacy at target sites.These advancements not only improve the immune-regulatory capacity of regulatory T cells but also significantly enhance their role in tissue repair.By leveraging the pivotal and diverse functions of Tregs in immune modulation and tissue repair,regulatory T cells–based therapies may lead to transformative breakthroughs in the treatment of neurological diseases.
基金supported by the National Natural Science Foundation of China (Nos. 82192913 and 82304851)the Scientific and Technological Innovation Project of China Academy of Chinese Medical Sciences (Nos. CI2023E002, CI2021B016, and CI2021A04801)the Fundamental Research Funds for the Central Public Welfare Research Institutes (Nos. ZZ13-YQ-055 and ZXKT22044)。
文摘Curcuma is a traditional Chinese medicine that has been utilized for centuries in the treatment of various diseases. Terpenoids, particularly monoterpenes and sesquiterpenes, constitute the primary bioactive components of the essential oil derived from Curcuma species.Among these, curdione—one of the key active constituents—has been identified in 25 Curcuma species, with the highest concentration reported in the rhizome essential oil of Curcuma trichosantha Gagnep. Curdione can also be synthesized through chemical methods,and its regio-and stereo-selectivity can be further optimized via chemo-bio transformations.This compound demonstrates significant therapeutic potential, including anticancer, antithrombotic, anti-inflammatory, anti-viral, anti-fungal, anti-diabetic, and multi-organ protective properties. Despite these promising biological activities, its clinical application is hindered by poor water solubility and potential toxicity. This review summarizes current knowledge on the natural sources, chemical synthesis, chemo-bio transformations, metabolism, pharmacokinetics, pharmacological effects, potential toxicities, and molecular mechanisms of curdione. Furthermore, perspectives on future drug development are discussed with the aim of promoting the clinical translation of this promising natural compound.
基金supported by Central Finance for the Forestry Science and Technology Promotion Demonstration Project([2024]TG13)the National Science Foundation of China(Grant No.32201643)the Key research projects of Yibin,Research and Integrated Demonstration and Key Technologies for Smart Bamboo Industry(Grant No.YBZD2024-1).
文摘Anthocyanin-rich foliage plants hold important applications in the pharmaceutical industry and the tea sector,beyond their significant ornamental value.These plants also possess biological and ecological importance,contributing to reproduction,defense against natural enemies,and adaptation to environmental changes.Thus,a deeper understanding of their leaf coloration will be essential for both practical applications and theoretical understanding.The present study comprehensively reviews the factors influencing anthocyanin metabolism,including biosynthesis,transport,degradation,transcription factors(TF_(S)),post-transcriptional regulation,post translation regulation.Next,we summarize the application of omics technologies in unveiling the mechanisms of anthocyanin synthesis in leaves.Furthermore,we review the molecular mechanisms by which environmental factors regulate leaf coloration by inducing anthocyanin biosynthesis.Lastly,the study addresses unresolved issues in the research of plant leaf coloration and proposes future research directions in this field.This study is anticipated to provide a valuable reference for the study of plant leaf coloration.
文摘As a crucial aspect of international governance,international standardization requires legitimacy grounded in the principles and frameworks established by international law.Building upon an understanding of the commonalities between international law and international standardization,this paper explores the mechanism through which international law centered on treaties empowers international standardization.
基金funded by Ausnutria-kabrita Research Fund(RS2022-14).
文摘Probiotics can regulate the body’s immune system through both non-specific and specific immunity,thereby regulating host health.In terms of non-specific immune regulation,probiotics can activate the intrinsic immune system,regulate the mucosal barrier function,and play an immune role by influencing the activity of intrinsic immune cells such as macrophages,dendritic cells and natural killer cells,as well as their differentiation and maturation;in terms of specific immune regulation,probiotics play a role in regulating the immunoglobulin level and the maturation of B cells.Probiotics can also regulate T-cell differentiation according to the condition of the body,thus regulating specific immunity.Many studies have focused on the role of probiotics in metabolism and nutrition,and the mechanisms involved in the immunomodulatory role of probiotics have only been partially described.This review summarises the role of common probiotics such as Lactobacillus plantarum and Lactobacillus rhamnosus in immunomodulation as well as their mechanisms,describing the currently known mechanisms of immunomodulation by probiotics in improving the host immune system.A deeper understanding of probiotics and their specific mechanisms of action will facilitate the use of probiotics for immunomodulation in clinical medicine,functional foods,and other areas.This will also contribute to the development and research of engineered probiotics,next-generation probiotics,and other new functional probiotics with immunomodulatory effects.
基金supported by the Anhui Quality Infrastructure Standardization Project(Grant No.2024MKSO7)the Science and Technology Project of State Grid(SGAHDK00DJJS2310027)the Anhui Provincial Natural Science Foundation(Grant No.2208085UD03).
文摘In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.
基金financially supported by the National Natural Science Foundation of China (No.52100076)the Fundamental Research Funds for the Central Universities (No.2023MS064)。
文摘The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.
基金Financial support from the National Natural Science Foundation of China(32502106)One health Interdisciplinary Research Project,Institute of One Health Science,Ningbo University(NBUOH202502)the Ningbo Top Talent Project(215-432094250).
文摘The antioxidant activity of selenium-containing soybean peptides(SePPs)has been previously demonstrated,despite their limited absorption in the small intestine.This study investigates the antioxidant mechanism of a selenium-containing tetrapeptide,Ser-Phe-Gln-SeM(SFQSeM),identified from SePPs,with particular emphasis on its interaction with the intestinal microbiota and its role in modulating host antioxidant defenses.The effects of SFQSeM were evaluated in a D-galactose-induced oxidative stress model and an antibiotictreated mouse model.SFQSeM supplementation significantly reduced the oxidative stress in D-galactosetreated mice.It also promoted the growth of beneficial bacteria and increased the levels of acetate,butyrate and lactate in the intestine(P<0.05).In the antibiotic-treated mouse model,depletion of the intestinal microbiota significantly reduced hepatic glutathione peroxidase(GSH-Px)activity(26.6%)and glutathione peroxidase 1(GPx-1)expression(48.77%)compared to normal mice supplemented with SFQSeM(P<0.05).In contrast to Na_(2)SeO_(3)and selenomethionine,SFQSeM effectively restored the diversity of the intestinal microbiota disrupted by antibiotics.Lactobacillus,Lachnospiraceae_NK4A136_group,and Muribaculaceae were identified as predominant bacteria in the SFQSeM group,and were strongly associated with increased hepatic GSH-Px activity and GPx-1 mRNA expression(P<0.05).In conclusion,intestinal microbiota enhances the antioxidant efficacy of SFQSeM by modulating microbial composition,producing active metabolites,and converting SFQSeM into a bioactive form of selenium.
基金supported by the National Natural Science Foundation of China(Grant Nos.22325601,92044302,42377105)the National Key Scientific and Technological Infrastructure project“Earth System Science Numerical Simulator Facility”.
文摘The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous reactions,and heterogeneous reactions of 300 species,which is adequate for both box model and climate transport model(CTM)applications.Detailed chemical processes of chlorine chemistry,chemistry of Criegee intermediates,and heterogeneous uptake of HO_(2) and N_(2)O_(5) have been implemented and updated.With this level of explicitness,MAX1 can support investigations into the quantification of secondary pollutant productions and the chemical behavior of the crucial intermediates,such as organic peroxy radicals.Box model and CTM tests were conducted to evaluate the performance of MAX1 from different perspectives.Simulations of MAX1 successfully captured the variation of ozone in all cases tested.Meanwhile,significant improvement was made on predictions of radicals compared to other mechanisms,especially under the low NO_(x) environment,with good similarity to simulations of a nearly explicit chemical mechanism(i.e.,Master Chemical Mechanism)that contains over 17000 reactions.The computational expense of MAX1 is acceptable and it can be applied in atmospheric scientific research and air quality prediction.MAX1 introduces new dimensions in atmospheric chemistry modeling,and its potential application in policymaking is a promising yet exploratory step.It offers improved insights into air quality dynamics,which could assist policymakers in making more informed decisions.However,the translation of its detailed chemical understanding into practical strategies remains an area for further investigation.This model suggests a path towards more nuanced air pollution control methods,contributing to ongoing efforts in environmental management.
基金supported by the National Natural Science Foundation of China(22378368).
文摘The blood-brain barrier(BBB)is a major challenge in drug delivery for the treatment of central nervous system diseases.Walnut derived peptide TWLPLPR(TW-7)has been proved to promote neuronal mitochondrial autophagy and enhance hippocampal neuronal synaptic plasticity,thereby improving learning and memory abilities in mice.We investigated the internalization mechanism and intracellular transport pathway for the walnut-derived peptide,TW-7,using b End.3 cells in an in vitro BBB model system.TW-7 was taken up by the b End.3 cells in a concentration-,temperature-,and energy-dependent manner;this involved increases in caveolin-1 and caveolin-2 protein expression and phosphorylation and inhibition of P-glycoprotein-mediated efflux.Subcellular localization of TW-7 in b End.3 cells was observed,indicating that the plasma membrane,endoplasmic reticulum,Golgi apparatus,lysosomes,and mitochondria participated in intracellular trafficking and that the peptide escaped from lysosomes over time.Caveolae may be critical for TW-7 uptake by brain microvascular endothelial cells,assisting TW-7 to cross the BBB.The results of this study provide a theoretical basis for the mechanism of active peptide penetrating the BBB,and provide a reference for developing neuroprotective active peptide products.
基金supported by the National Natural Science Foundation of China(12522203,12532003 and U2267252)National Technological Basic Research Program of China,the Development and Application Project of Ship CAE Softwarethe Science and Technology Innovation 2035 Major Project of Yongjiang under Grant(2025Z009).
文摘The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and modeling,the result reveals that the corrosion leads to grain refinement and a reduction in the proportion of low-angle grain boundaries.Notably,corrosion promotes austenite enrichment(increasing from 1.8%to 13.9%)through selective dissolution of the martensitic matrix,while repetitive impacts reverse this trend(reducing to 0.1%)through stress-induced martensitic transformation.Fracture analysis demonstrates corrosion-induced ductile-to-brittle transition,with quasi-cleavage features dominating after prolonged corrosion.A physics-based dynamic yield strength model with<3%prediction error relative to impact tests is developed.These findings establish microstructure-property relationships of AerMet 100 steel under multi-field coupling,providing critical guidance for designing corrosion-resistant ultrahigh-strength steels in marine-impact environments.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
