The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to...The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to improve thermal efficiency.In this work,buoyancy-induced flow above two heating elements flush-mounted at the bottom of a square enclosure containing air is numerically investigated over a range of Rayleigh numbers(0<Ra≤1.5×10^(8)),with a focus on equal and unequal heat flux conditions under a constraint of constant total thermal energy input.Distinct flow transitions are observed in both cases,leading to the identification of three flow regimes:Steady,periodic unsteady,and chaotic unsteady.Two types of periodic flows are distinguished,in which the first is a periodic flow dominated by a fundamental frequency(FF)and its integer-multiple frequencies(INTMF),while the second is a more complex periodic flow featuring FF,INTMF,and their sub-harmonics.The transitions between these regimes are affected by the relative heat flux of the two heaters.When the heat flux of the two heaters is unequal,the range of Rayleigh numbers corresponding to periodic flow is suppressed.It is also found that the time-averaged maximum temperature of the strong heater increases more rapidly with Ra,while that of the weak heater increases more slowly,reflecting the interaction between buoyancy-driven flow dynamics and asymmetric heat input.Analysis of the time-averaged Nusselt number demonstrates that heat dissipation from the isothermal walls remains roughly equivalent,even when the heat flux of the two heaters differs by a factor of two.These findings highlight the critical roles of Rayleigh number,the number of heaters,and the heat flux ratio of the heaters in determining heat transfer and flow characteristics for buoyancy-driven convection systems,providing important theoretical support and design references for engineering scenarios such as electronic devices and design of new energy systems.展开更多
We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-...We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.展开更多
Effects of alloying elements Ni,Co,Mn,Cr,and H on the stacking fault energy(SFE)ofγ-Fe and its microscopic mechanisms were systematically investigated.Generalized SFE calculations show that individual alloying elemen...Effects of alloying elements Ni,Co,Mn,Cr,and H on the stacking fault energy(SFE)ofγ-Fe and its microscopic mechanisms were systematically investigated.Generalized SFE calculations show that individual alloying elements Ni,Co,and H increase SFE ofγ-Fe,whereas Mn and Cr decrease SFE.The influence of alloying elements on SFE exhibits short-range characteristics.The effect of synergistic interaction of alloying elements and H on SFE was further investigated.Results show that the co-alloying of Ni/Co with H exacerbates the effect of H on the increase in SFE.In contrast,the synergistic effect of Mn/Cr with H tends to inhibit H from the increasing SFE.Finally,the electronic structure analysis elucidated the microscopic mechanism of the change in SFE.Alloying elements modulate SFE by changing the interatomic charge density at the stacking fault plane and the density of states of the stacking fault structure at the Fermi level.The present results add to the knowledge of alloying related influence on the mechanical property and hydrogen embrittlement ofγ-Fe.展开更多
The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD9...The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD98M alloy significantly decreases with an increase in impurity content,and the presence of nitrogen leads to an increase in alloy porosity.These porosities promote the rapid diffusion of molten salt and oxygen into the alloy,resulting in a bilateral diffusion of oxygen and sulfur,which leads to an accumulation of these elements at the oxide−matrix interface.This process contributes to the formation and propagation of interfacial cracks.A growth model was developed for hot corrosion products in alloys with varying impurity elements.展开更多
Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage se...Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.展开更多
Producing steel requires large amounts of energy to convert iron ores into steel,which often comes from fossil fuels,leading to carbon emissions and other pollutants.Increasing scrap usage emerges as one of the most e...Producing steel requires large amounts of energy to convert iron ores into steel,which often comes from fossil fuels,leading to carbon emissions and other pollutants.Increasing scrap usage emerges as one of the most effective strategies for addressing these issues.However,typical residual elements(Cu,As,Sn,Sb,Bi,etc.)inherited from scrap could significantly influence the mechanical properties of steel.In this work,we investigate the effects of residual elements on the microstructure evolution and mechanical properties of a quenching and partitioning(Q&P)steel by comparing a commercial QP1180 steel(referred to as QP)to the one containing typical residual elements(Cu+As+Sn+Sb+Bi<0.3wt%)(referred to as QP-R).The results demonstrate that in comparison with the QP steel,the residual elements significantly refine the prior austenite grain(9.7μm vs.14.6μm)due to their strong solute drag effect,leading to a higher volume fraction(13.0%vs.11.8%),a smaller size(473 nm vs.790 nm)and a higher average carbon content(1.26 wt%vs.0.99 wt%)of retained austenite in the QP-R steel.As a result,the QP-R steel exhibits a sustained transformation-induced plasticity(TRIP)effect,leading to an enhanced strain hardening effect and a simultaneous improvement of strength and ductility.Grain boundary segregation of residual elements was not observed at prior austenite grain boundaries in the QP-R steel,primarily due to continuous interface migration during austenitization.This study demonstrates that the residual elements with concentrations comparable to that in scrap result in significant microstructural refinement,causing retained austenite with relatively higher stability and thus offering promising mechanical properties and potential applications.展开更多
The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This pap...The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.展开更多
As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and oper...As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].展开更多
Rare earth elements（REEs） and major elements of 25 cobalt-rich crusts obtained from different depths of Mid-Pacific M seamount were analyzed using inductively coupled plasma-atomic emission spectrometer and gravimet...Rare earth elements（REEs） and major elements of 25 cobalt-rich crusts obtained from different depths of Mid-Pacific M seamount were analyzed using inductively coupled plasma-atomic emission spectrometer and gravimetric method.The results showed that they were hydrogenous crusts with average ∑REE content of 2084.69 μg/g and the light REE（LREE）/heavy REE（HREE） ratio of 4.84.The shale-normalized REE patterns showed positive Ce anomalies.The total content of strictly trivalent REEs increased with water depth.The Ce content and LREE/HREE ratios in Fe-Mn crusts above 2000 m were lower than those below 2000 m.The change in REE with water depth could be explained by two processes：adsorptive scavenging by setting matters and behaviors of REE in seawater.However, the Ce abundance took no obvious correlation with water depth reflects the constant Ce flux.The Ce in crusts existed mainly as Ce（IV）, implying that the oxidative-enriching process was controlled by kinetic factors.展开更多
The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−M...The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−Mg alloys in different aging states were characterized.Additionally,the hardness and electrical conductivity of the materials were investigated.Results show that the precipitation pattern in Cu−Ti−Cr−Mg alloys resembled that of binary Cu−Ti alloys,with Cr and Ti forming the intermetallic compound of Cr_(2)Ti during casting.The introduction of Cr and Mg increased the hardness of the alloy.Increasing the Mg content in the Cu−Ti−Cr−Mg alloy led to grain refinement and fast nucleation of continuous precipitates during the early aging stage.Moreover,the addition of Mg impeded discontinuous precipitate growth by segregating along the precipitate surfaces.Consequently,the Cu−4Ti−0.5Cr−1Mg alloy exhibited limited discontinuous precipitates at the grain boundaries and a gradual decline in hardness during the over-aging period.展开更多
Cu–Ni and Cu–Co–Ni superhydrophobic films were constructed on the surface of B10 copper–nickel alloy welded joints using a two-step process of electrodeposition and stearic acid modification.The chemical compositi...Cu–Ni and Cu–Co–Ni superhydrophobic films were constructed on the surface of B10 copper–nickel alloy welded joints using a two-step process of electrodeposition and stearic acid modification.The chemical composition of the film surface was determined using surface characterization techniques.The corrosion resistance of the films was characterized using electrochemical impedance spectroscopy,potentiodynamic polarization,and scanning Kelvin probe microscopy at multiple scales.The thermal stability,mechanical stability,and self-cleaning properties of the films were also characterized.It was determined that the Cu–Co–Ni superhydrophobic film exhibited the best performance,with a static water contact angle of 159.3°,a roll-off angle of 2.3°,a charge transfer resistance 3300 times higher than the substrate,a self-corrosion current density nearly three orders of magnitude lower,and a surface Kelvin potential increase of 420 mV.The film demonstrated good thermal stability,excellent mechanical stability,and outstanding self-cleaning properties.Combining with previous studies,it was found that Co elements in the film contribute to the formation of a uniform and dense film,Ni elements enhance the adhesion and corrosion resistance between the films,and the combination of Co and Ni elements promotes uniform surface potential and further improves the corrosion resistance and interfilm adhesion of the films.展开更多
Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of t...Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.展开更多
The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objecti...The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objectively assess the mineralogical and geochemical characteristics of a thickest low-rank coal seam in the Lower Indus Basin southeastern Pakistan,and further investigate different controlling factors.The analytical results of major oxides,trace elements,and rare earth elements revealed that the weathering conditions were progressively variable and moderate.The sediment source,mainly of felsic and intermediate composition,was dominated by granitic rocks.The geochemical assessment reveals different depositional factors like marine environment influenced,while transitional and freshwater sediments influenced the center of the coal peat mire.Strontium,Zinc,and several hazardous trace elements,including Cu,Ni,Cr,and Co,have higher concentrations in these coals compared to world low-rank,U.S.,and Chinese coals.The relatively higher concentration of Sr in the thick coal seam in the Lower Indus Basin,compared to other coals seams in Pakistan and the enrichment of Sr was primarily controlled by the denudation of crystalline rocks and marine influx in the coal-basin.The REY distribution pattern showed that enrichment of medium and heavy rare earth elements is higher than light rare earth elements in the coal seam.The Gd distribution pattern in the coal seam demonstrated that strong positive anomalies had a good affinity with paleo-acidic water concentration in the study area.The higher concentration of Sr and other elements enables a better assessment understanding of the coal geochemical history.展开更多
[Objectives]To investigate the content and distribution of inorganic elements in Astragalus membranaceus sourced from various regions in Gansu Province.[Methods]28 batches of A.membranaceus samples were collected and ...[Objectives]To investigate the content and distribution of inorganic elements in Astragalus membranaceus sourced from various regions in Gansu Province.[Methods]28 batches of A.membranaceus samples were collected and subsequently digested using the Multiwave 7000 super microwave digestion system.The contents of aluminum(Al),barium(Ba),beryllium(Be),cobalt(Co),chromium(Cr),iron(Fe),gallium(Ga),magnesium(Mg),manganese(Mn),nickel(Ni),antimony(Sb),tin(Sn),strontium(Sr),titanium(Ti),thallium(Tl),vanadium(V),and zinc(Zn)were quantified utilizing a PerkinElmer 2000 inductively coupled plasma mass spectrometer.Principal component analysis was performed utilizing SPSS 25.0 to identify the distinctive characteristic elements of A.membranaceus.Additionally,systematic cluster analysis was conducted using these characteristic elements as variables to investigate the relationship between the primary inorganic elements and the geographical origin of A.membranaceus.[Results]17 inorganic elements were identified in A.membranaceus specimens collected from Gansu Province,with characteristic elements including Ba,Co,Fe,Ga,Mn,Zn,and Sn.The contents of inorganic elements in various sources of A.membranaceus exhibited significant variability and demonstrated distinct clustering characteristics.[Conclusions]A.membranaceus,originating from Gansu Province,exhibits a high content of inorganic elements.However,variations in ecological environments can lead to differences in the specific inorganic elements that are enriched.This study aims to provide a reference for the further development and application of A.membranaceus.展开更多
This review provides a comprehensive summary of biomass-based adsorption,with a particular focus on biochar as an innovative,sustainable,and eco-friendly technique for recovering rare earth elements(REEs) from various...This review provides a comprehensive summary of biomass-based adsorption,with a particular focus on biochar as an innovative,sustainable,and eco-friendly technique for recovering rare earth elements(REEs) from various sources.This study details primary adsorption mechanisms,including physical adsorption,ion exchange,electrostatic attraction,surface complexation,and precipitation,providing a nuanced understanding of how these processes contribute to metal recovery.Additionally,it discusses various biochar modification methods aimed at enhancing surface functionalities,thereby improving adsorption capacity and selectivity.It further addresses the critical challenge of biochar regeneration,outlining methods such as thermal,solvent,microwave irradiation,and supercritical fluid regeneration to sustain biochar's efficacy over multiple cycles.Overall,this comprehensive analysis highlights biochar's versatility and potential in environmental remediation and resource recovery,emphasizing the importance of optimized regeneration techniques to maintain its adsorption efficiency and future research directions for large-scale applications.展开更多
This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples w...This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples were taken from a depth of 0 to 20 cm using a hand auger on both banks of five tributaries of the Congo River (Djoué, Mfilou, Mfoa, Tsiémé, Djiri) that flow through the city of Brazzaville. 90 sampling points were defined, with 3 points 250 m apart on the banks and located, for each river, at three sites: upstream, midstream and downstream. Finally, 15 composite samples representative of the study area were taken. The average pH values of the water varied between 6.5 and 7.5. These pH values show that the soils studied are neutral. Total carbon content varied between 0.7% (Djiri) and 1.6% (Djoué). Total nitrogen content ranged from 0.08% (Djiri) to 0.12% (Djoué). TMEs contents varied from 0.5 to 1.8 mg/kg for Sb, from 0.5 to 2.5 mg/kg for As, from 0.1 to 0.18 mg/kg for Cd, from 4.2 to 11.3 mg/kg for Cr, from 0.07 to 0.27 mg/kg for Hg, from 0.7 to 2.4 mg/kg for Ni, from 0 to 158 mg/kg for Pb and from 16 to 105 mg/kg for Zn. The lowest TMEs levels were observed in the soils of the Djiri river, while the highest levels were observed in the soils of the Djoué and Tsiémé rivers. The ANOVA and Bonferroni test did not show significant differences in the means of the parameters measured (p > 0.05). The TMEs levels were below the accepted standards (NF U44-041), with the exception of Pb, which had high levels downstream of the Djoué. According to the pollution index values calculated using soil TME content, the soils on the banks of the Djoué river are considered polluted, while those on the banks of the Tsiémé river are moderately polluted, those on the banks of the Mfoa and Mfilou rivers are slightly polluted, and the soils on the banks of Djiri river are unpolluted.展开更多
Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs prod...Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs production and have high recycling value.In this study,smelting process was used to selectively oxidize REEs in the permanent magnets by adding Fe_(2)O_(3).This separates REEs into a slag phase from an iron-rich metallic phase.B_(2)O_(3) was also added to the system as a flux to lower the slag melting temperature.This minimizes REEs loss to the metallic phase and allows a more efficient phase separation.The effect of flux and oxidizing agent addition was investigated on both regular and cerium-rich NdFeB(NdCeFeB)magnets.At 1350℃and for 1 h,the slag phase was successfully separated from the metallic phase with the addition of 0.8 stoichiometric amount of Fe_(2)O_(3) and 40 wt%of B_(2)O_(3).Scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX)analysis reveals that REEs in the magnet do not migrate to the metal phase while the REE-rich slag phase contains almost no iron.After the selective removal of iron into the metallic phase,REEs are recovered from the slag phase through an acid leaching process allowing>99%of REEs recovery.Boron in the magnet can also be recovered as useful boric acid by evaporation and crystallisation technique.The proposed process in this study is reagent and energy-efficient with almost complete valorisation of both NdCeFeB and NdFeB magnets.展开更多
With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite...With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.展开更多
Quartz trace elements are extensively employed in studying magmatic evolution,fluid evolution,and metal enrichment.The Bianjiadayuan Ag-Pb-Zn-Sn deposit is a typical magmatichydrothermal system in northeastern China,h...Quartz trace elements are extensively employed in studying magmatic evolution,fluid evolution,and metal enrichment.The Bianjiadayuan Ag-Pb-Zn-Sn deposit is a typical magmatichydrothermal system in northeastern China,however,studies on its complex magmatic-hydrothermal evolution are limited.This study investigates the quartz from the Bianjiadayuan deposit to gain insight into the physicochemical evolution of mineralization using cathodoluminescence(CL)textures and laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS)of quartz.Five types quartz(Q1 to Q5)were identified.From Q1 in quartz porphyry to Q5 in Ag-Pb-Zn veins,the CL intensity and Ti content gradually decreases,and Ge,Ge/Ti,and Al/Ti ratios increase,indicating a temperature decline from magmatic to hydrothermal stages.The Sb content shows an opposite trend to Ti content,correlating positively with Ge content in quartz,suggesting that Sb content could also be temperature-dependent.These trace elements in quartz indicate cooling is critical for Ag mineralization.Furthermore,quartz phenocryst(Q1)from the quartz porphyry shows low Al/Ti(mostly<4)and Ge/Ti ratios(<0.04),suggesting a low degree of magmatic evolution.The Sb content in Q5 from Ag-Pb-Zn-quartz veins(>1 ppm,mostly tens of ppm)is notably higher compared to quartz in other lithologies including Sn-bearing quartz veins(<1 ppm),suggesting that Sb contents can serve as an effective indicator of Ag mineralization.展开更多
In this study,a pristine biochar(BCP)from dead Posidonia oceanica leaves,a by-product of biofuel production,and its two chemically activated forms with KOH(BBCP)and with H_(3)PO_(4)(ABCP)were tested as new adsorbent m...In this study,a pristine biochar(BCP)from dead Posidonia oceanica leaves,a by-product of biofuel production,and its two chemically activated forms with KOH(BBCP)and with H_(3)PO_(4)(ABCP)were tested as new adsorbent materials for the recovery of three rare earth cations(REE),namely La^(3+),Dy^(3+)and Nd^(3+)from aqueous solutions.The biochars were characterized through elemental analysis,nitrogen adsorption-desorption analysis,attenuated total reflectance-Fourier transform infrared(ATR-FT-IR)spectroscopy,scanning electron microscopy and energy dispersive X-ray spectroscopy(SEM-EDX),and pHpzcmeasurements.From single batch adsorption experiments at different pH values,the pH=5.0 was chosen as the best pH value for kinetic and isotherm adsorption studies.The effect of ionic medium on the adsorption ability of the best REE adsorbent ABCP was also evaluated by carrying out isotherm experiments in 0.1 mol/L NaNO3.Inductively coupled plasma optical emission spectroscopy(ICP-OES)was used to evaluate the REE concentration in the solutions.Kinetic and isotherm data of REE adsorption were tentatively subjected to regression analysis with various kinetic and isotherm equations.The parameter values of the best fit models and characterization results were analyzed to obtain information about the adsorption mechanism.The recyclability of ABCP adsorbent was also evaluated through recycle and reuse column experiments in which 0.1 mol/L HNO3and EDTA were used as extractant solutions.The chemical activation processes enhance the adsorption capacity of BCP by increasing the carbonization,the specific and microporous surface area,the pore volume and,in the case of activation with H_(3)PO_(4),introducing phosphate groups in the biochar structure.The promising REE recovery results obtained with ABCP transform the biochar from a by-product to a high value-added material.This contributes to making biofuel production a more cost-effective and environmentally-friendly process.展开更多
基金supported by the Tianjin Education Commission Research Program Project(No.2024KJ105)。
文摘The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to improve thermal efficiency.In this work,buoyancy-induced flow above two heating elements flush-mounted at the bottom of a square enclosure containing air is numerically investigated over a range of Rayleigh numbers(0<Ra≤1.5×10^(8)),with a focus on equal and unequal heat flux conditions under a constraint of constant total thermal energy input.Distinct flow transitions are observed in both cases,leading to the identification of three flow regimes:Steady,periodic unsteady,and chaotic unsteady.Two types of periodic flows are distinguished,in which the first is a periodic flow dominated by a fundamental frequency(FF)and its integer-multiple frequencies(INTMF),while the second is a more complex periodic flow featuring FF,INTMF,and their sub-harmonics.The transitions between these regimes are affected by the relative heat flux of the two heaters.When the heat flux of the two heaters is unequal,the range of Rayleigh numbers corresponding to periodic flow is suppressed.It is also found that the time-averaged maximum temperature of the strong heater increases more rapidly with Ra,while that of the weak heater increases more slowly,reflecting the interaction between buoyancy-driven flow dynamics and asymmetric heat input.Analysis of the time-averaged Nusselt number demonstrates that heat dissipation from the isothermal walls remains roughly equivalent,even when the heat flux of the two heaters differs by a factor of two.These findings highlight the critical roles of Rayleigh number,the number of heaters,and the heat flux ratio of the heaters in determining heat transfer and flow characteristics for buoyancy-driven convection systems,providing important theoretical support and design references for engineering scenarios such as electronic devices and design of new energy systems.
基金supported in part by the National Key R&D Program of China (Contract Nos.2023YFA1606500,2024YFE0109800,and 2024YFE0110400)Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB34010000)+5 种基金the Gansu Key Project of Science and Technology (Grant No.23ZDGA014)the Guangdong Major Project of Basic and Applied Basic Research (Grant No.2021B0301030006)the National Natural Science Foundation of China (Grant Nos.12105328,W2412040,12475126,12422507,12035011,12375118,12435008,and W2412043)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-002)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant Nos.2020409 and 2023439)the Russian Science Foundation (Grant No.25-42-00003)。
文摘We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.
基金supported by National Science and Technology Major Project(2025ZD0618901)National Natural Science Foundation of China(U2241245 and 52321001)+2 种基金Aeronautical Science Foundation of China(2022Z053092001)Natural Science Foundation of Shenyang(23-503-6-05)Science and Technology Major Project of Liaoning Province(2024JH1/11700028).
文摘Effects of alloying elements Ni,Co,Mn,Cr,and H on the stacking fault energy(SFE)ofγ-Fe and its microscopic mechanisms were systematically investigated.Generalized SFE calculations show that individual alloying elements Ni,Co,and H increase SFE ofγ-Fe,whereas Mn and Cr decrease SFE.The influence of alloying elements on SFE exhibits short-range characteristics.The effect of synergistic interaction of alloying elements and H on SFE was further investigated.Results show that the co-alloying of Ni/Co with H exacerbates the effect of H on the increase in SFE.In contrast,the synergistic effect of Mn/Cr with H tends to inhibit H from the increasing SFE.Finally,the electronic structure analysis elucidated the microscopic mechanism of the change in SFE.Alloying elements modulate SFE by changing the interatomic charge density at the stacking fault plane and the density of states of the stacking fault structure at the Fermi level.The present results add to the knowledge of alloying related influence on the mechanical property and hydrogen embrittlement ofγ-Fe.
基金financial support from the National Key Research and Development Project of China(No.2019YFA0705300)the National Natural Science Foundation of China(No.52004051)+1 种基金the Project of Zhongyuan Critical Metals Laboratory,China(No.GJJSGFYQ202321)the Fund for Priority Support of Research Projects by Returned Overseas Scholars in Henan Province,China。
文摘The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD98M alloy significantly decreases with an increase in impurity content,and the presence of nitrogen leads to an increase in alloy porosity.These porosities promote the rapid diffusion of molten salt and oxygen into the alloy,resulting in a bilateral diffusion of oxygen and sulfur,which leads to an accumulation of these elements at the oxide−matrix interface.This process contributes to the formation and propagation of interfacial cracks.A growth model was developed for hot corrosion products in alloys with varying impurity elements.
基金supported by the National Natural Science Foundation of China, No.61932008Natural Science Foundation of Shanghai, No.21ZR1403200 (both to JC)。
文摘Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.
基金financially supported by the National Natural Science Foundation of China(Nos.52293395 and 52293393)the Xiongan Science and Technology Innovation Talent Project of MOST,China(No.2022XACX0500).
文摘Producing steel requires large amounts of energy to convert iron ores into steel,which often comes from fossil fuels,leading to carbon emissions and other pollutants.Increasing scrap usage emerges as one of the most effective strategies for addressing these issues.However,typical residual elements(Cu,As,Sn,Sb,Bi,etc.)inherited from scrap could significantly influence the mechanical properties of steel.In this work,we investigate the effects of residual elements on the microstructure evolution and mechanical properties of a quenching and partitioning(Q&P)steel by comparing a commercial QP1180 steel(referred to as QP)to the one containing typical residual elements(Cu+As+Sn+Sb+Bi<0.3wt%)(referred to as QP-R).The results demonstrate that in comparison with the QP steel,the residual elements significantly refine the prior austenite grain(9.7μm vs.14.6μm)due to their strong solute drag effect,leading to a higher volume fraction(13.0%vs.11.8%),a smaller size(473 nm vs.790 nm)and a higher average carbon content(1.26 wt%vs.0.99 wt%)of retained austenite in the QP-R steel.As a result,the QP-R steel exhibits a sustained transformation-induced plasticity(TRIP)effect,leading to an enhanced strain hardening effect and a simultaneous improvement of strength and ductility.Grain boundary segregation of residual elements was not observed at prior austenite grain boundaries in the QP-R steel,primarily due to continuous interface migration during austenitization.This study demonstrates that the residual elements with concentrations comparable to that in scrap result in significant microstructural refinement,causing retained austenite with relatively higher stability and thus offering promising mechanical properties and potential applications.
文摘The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.
基金supported by National Natural Science Foundation of China(Grants 72474022,71974011,72174022,71972012,71874009)"BIT think tank"Promotion Plan of Science and Technology Innovation Program of Beijing Institute of Technology(Grants 2024CX14017,2023CX13029).
文摘As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].
基金supported by the National Natural Science Foundation of China(40704029 40376016)+1 种基金China International Science and Technology Cooperation Project (2006DFB21620)the Young People Marine Science Foundation of State Oceanic Administration (2005304)
文摘Rare earth elements（REEs） and major elements of 25 cobalt-rich crusts obtained from different depths of Mid-Pacific M seamount were analyzed using inductively coupled plasma-atomic emission spectrometer and gravimetric method.The results showed that they were hydrogenous crusts with average ∑REE content of 2084.69 μg/g and the light REE（LREE）/heavy REE（HREE） ratio of 4.84.The shale-normalized REE patterns showed positive Ce anomalies.The total content of strictly trivalent REEs increased with water depth.The Ce content and LREE/HREE ratios in Fe-Mn crusts above 2000 m were lower than those below 2000 m.The change in REE with water depth could be explained by two processes：adsorptive scavenging by setting matters and behaviors of REE in seawater.However, the Ce abundance took no obvious correlation with water depth reflects the constant Ce flux.The Ce in crusts existed mainly as Ce（IV）, implying that the oxidative-enriching process was controlled by kinetic factors.
基金supported by the National Natural Science Foundation of China(No.52201226)Fundamental Research Program of Shanxi Province,China(No.202103021223036)+1 种基金the Key Scientific Research Project in Shanxi Province,China(No.202102050201007)the special fund for Science and Technology Innovation Teams of Shanxi Province,China(No.202204051001004)。
文摘The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−Mg alloys in different aging states were characterized.Additionally,the hardness and electrical conductivity of the materials were investigated.Results show that the precipitation pattern in Cu−Ti−Cr−Mg alloys resembled that of binary Cu−Ti alloys,with Cr and Ti forming the intermetallic compound of Cr_(2)Ti during casting.The introduction of Cr and Mg increased the hardness of the alloy.Increasing the Mg content in the Cu−Ti−Cr−Mg alloy led to grain refinement and fast nucleation of continuous precipitates during the early aging stage.Moreover,the addition of Mg impeded discontinuous precipitate growth by segregating along the precipitate surfaces.Consequently,the Cu−4Ti−0.5Cr−1Mg alloy exhibited limited discontinuous precipitates at the grain boundaries and a gradual decline in hardness during the over-aging period.
基金fnancial support by the National Natural Science Foundation of China(Grant No.42176209)the Natural Science Foundation of Shandong Province(Grant No.ZR2021MD064).
文摘Cu–Ni and Cu–Co–Ni superhydrophobic films were constructed on the surface of B10 copper–nickel alloy welded joints using a two-step process of electrodeposition and stearic acid modification.The chemical composition of the film surface was determined using surface characterization techniques.The corrosion resistance of the films was characterized using electrochemical impedance spectroscopy,potentiodynamic polarization,and scanning Kelvin probe microscopy at multiple scales.The thermal stability,mechanical stability,and self-cleaning properties of the films were also characterized.It was determined that the Cu–Co–Ni superhydrophobic film exhibited the best performance,with a static water contact angle of 159.3°,a roll-off angle of 2.3°,a charge transfer resistance 3300 times higher than the substrate,a self-corrosion current density nearly three orders of magnitude lower,and a surface Kelvin potential increase of 420 mV.The film demonstrated good thermal stability,excellent mechanical stability,and outstanding self-cleaning properties.Combining with previous studies,it was found that Co elements in the film contribute to the formation of a uniform and dense film,Ni elements enhance the adhesion and corrosion resistance between the films,and the combination of Co and Ni elements promotes uniform surface potential and further improves the corrosion resistance and interfilm adhesion of the films.
文摘Based on the service characteristics of fuel elements for molten salt reactors,they need to have a high power density,resistance to coolant infiltration,and excellent thermodynamic properties.To solve the problem of the graphite used in the fuel element for these reactors being susceptible to molten salt infiltration,carbon black(CB)was added to increase the density of the graphite,and a fuel element(TRISO(tri-structural isotropic)fuel particles were randomly distributed in the modified graphite matrix)was prepared by cold isostatic pressing process.An out-of-pile performance study shows that the densification and pore structure of the modified graphite matrix were improved,as was the resistance to molten salt infiltration.The median pore size of the modified graphite was reduced from 673 to 433 nm and the threshold pressure for molten salt(FLiBe,66%(molar fraction)LiF and 34%BeF_(2))infiltration was increased from 0.88 to 1.37 MPa.The isotropic CB made the graphite matrix less anisotropic,while its thermal conductivity and compressive strength were reduced due to the difficult graphitization of CB.Fuel elements containing 20%(volume fraction)TRISO particles were prepared.Numerical simulations show that the power and temperature distribution of the fuel were in line with the design requirements.The modified graphite matrix had a higher density,smaller pores,a lower anisotropy and a greater resistance to FLiBe infiltration.
基金supported by the National Natural Science Foundation of China,funding numbers 41690131,41572327,51874280 and 5264015.
文摘The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objectively assess the mineralogical and geochemical characteristics of a thickest low-rank coal seam in the Lower Indus Basin southeastern Pakistan,and further investigate different controlling factors.The analytical results of major oxides,trace elements,and rare earth elements revealed that the weathering conditions were progressively variable and moderate.The sediment source,mainly of felsic and intermediate composition,was dominated by granitic rocks.The geochemical assessment reveals different depositional factors like marine environment influenced,while transitional and freshwater sediments influenced the center of the coal peat mire.Strontium,Zinc,and several hazardous trace elements,including Cu,Ni,Cr,and Co,have higher concentrations in these coals compared to world low-rank,U.S.,and Chinese coals.The relatively higher concentration of Sr in the thick coal seam in the Lower Indus Basin,compared to other coals seams in Pakistan and the enrichment of Sr was primarily controlled by the denudation of crystalline rocks and marine influx in the coal-basin.The REY distribution pattern showed that enrichment of medium and heavy rare earth elements is higher than light rare earth elements in the coal seam.The Gd distribution pattern in the coal seam demonstrated that strong positive anomalies had a good affinity with paleo-acidic water concentration in the study area.The higher concentration of Sr and other elements enables a better assessment understanding of the coal geochemical history.
基金Supported by Project of NMPA Key Laboratory for Quality Control of Traditional Chinese Medicine(2023GSMPA-KL06,2024GSMPA-KL16).
文摘[Objectives]To investigate the content and distribution of inorganic elements in Astragalus membranaceus sourced from various regions in Gansu Province.[Methods]28 batches of A.membranaceus samples were collected and subsequently digested using the Multiwave 7000 super microwave digestion system.The contents of aluminum(Al),barium(Ba),beryllium(Be),cobalt(Co),chromium(Cr),iron(Fe),gallium(Ga),magnesium(Mg),manganese(Mn),nickel(Ni),antimony(Sb),tin(Sn),strontium(Sr),titanium(Ti),thallium(Tl),vanadium(V),and zinc(Zn)were quantified utilizing a PerkinElmer 2000 inductively coupled plasma mass spectrometer.Principal component analysis was performed utilizing SPSS 25.0 to identify the distinctive characteristic elements of A.membranaceus.Additionally,systematic cluster analysis was conducted using these characteristic elements as variables to investigate the relationship between the primary inorganic elements and the geographical origin of A.membranaceus.[Results]17 inorganic elements were identified in A.membranaceus specimens collected from Gansu Province,with characteristic elements including Ba,Co,Fe,Ga,Mn,Zn,and Sn.The contents of inorganic elements in various sources of A.membranaceus exhibited significant variability and demonstrated distinct clustering characteristics.[Conclusions]A.membranaceus,originating from Gansu Province,exhibits a high content of inorganic elements.However,variations in ecological environments can lead to differences in the specific inorganic elements that are enriched.This study aims to provide a reference for the further development and application of A.membranaceus.
文摘This review provides a comprehensive summary of biomass-based adsorption,with a particular focus on biochar as an innovative,sustainable,and eco-friendly technique for recovering rare earth elements(REEs) from various sources.This study details primary adsorption mechanisms,including physical adsorption,ion exchange,electrostatic attraction,surface complexation,and precipitation,providing a nuanced understanding of how these processes contribute to metal recovery.Additionally,it discusses various biochar modification methods aimed at enhancing surface functionalities,thereby improving adsorption capacity and selectivity.It further addresses the critical challenge of biochar regeneration,outlining methods such as thermal,solvent,microwave irradiation,and supercritical fluid regeneration to sustain biochar's efficacy over multiple cycles.Overall,this comprehensive analysis highlights biochar's versatility and potential in environmental remediation and resource recovery,emphasizing the importance of optimized regeneration techniques to maintain its adsorption efficiency and future research directions for large-scale applications.
文摘This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples were taken from a depth of 0 to 20 cm using a hand auger on both banks of five tributaries of the Congo River (Djoué, Mfilou, Mfoa, Tsiémé, Djiri) that flow through the city of Brazzaville. 90 sampling points were defined, with 3 points 250 m apart on the banks and located, for each river, at three sites: upstream, midstream and downstream. Finally, 15 composite samples representative of the study area were taken. The average pH values of the water varied between 6.5 and 7.5. These pH values show that the soils studied are neutral. Total carbon content varied between 0.7% (Djiri) and 1.6% (Djoué). Total nitrogen content ranged from 0.08% (Djiri) to 0.12% (Djoué). TMEs contents varied from 0.5 to 1.8 mg/kg for Sb, from 0.5 to 2.5 mg/kg for As, from 0.1 to 0.18 mg/kg for Cd, from 4.2 to 11.3 mg/kg for Cr, from 0.07 to 0.27 mg/kg for Hg, from 0.7 to 2.4 mg/kg for Ni, from 0 to 158 mg/kg for Pb and from 16 to 105 mg/kg for Zn. The lowest TMEs levels were observed in the soils of the Djiri river, while the highest levels were observed in the soils of the Djoué and Tsiémé rivers. The ANOVA and Bonferroni test did not show significant differences in the means of the parameters measured (p > 0.05). The TMEs levels were below the accepted standards (NF U44-041), with the exception of Pb, which had high levels downstream of the Djoué. According to the pollution index values calculated using soil TME content, the soils on the banks of the Djoué river are considered polluted, while those on the banks of the Tsiémé river are moderately polluted, those on the banks of the Mfoa and Mfilou rivers are slightly polluted, and the soils on the banks of Djiri river are unpolluted.
基金Project supported by the Science and Engineering Research Board of India(SRG/2020/002096)。
文摘Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs production and have high recycling value.In this study,smelting process was used to selectively oxidize REEs in the permanent magnets by adding Fe_(2)O_(3).This separates REEs into a slag phase from an iron-rich metallic phase.B_(2)O_(3) was also added to the system as a flux to lower the slag melting temperature.This minimizes REEs loss to the metallic phase and allows a more efficient phase separation.The effect of flux and oxidizing agent addition was investigated on both regular and cerium-rich NdFeB(NdCeFeB)magnets.At 1350℃and for 1 h,the slag phase was successfully separated from the metallic phase with the addition of 0.8 stoichiometric amount of Fe_(2)O_(3) and 40 wt%of B_(2)O_(3).Scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX)analysis reveals that REEs in the magnet do not migrate to the metal phase while the REE-rich slag phase contains almost no iron.After the selective removal of iron into the metallic phase,REEs are recovered from the slag phase through an acid leaching process allowing>99%of REEs recovery.Boron in the magnet can also be recovered as useful boric acid by evaporation and crystallisation technique.The proposed process in this study is reagent and energy-efficient with almost complete valorisation of both NdCeFeB and NdFeB magnets.
基金Project(2022YFC2105300) supported by the National Key Research and Development Program of ChinaProject(52274288) supported by the National Natural Science Foundation of China。
文摘With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.
基金supported by the National Natural Science Foundation of China(No.42222205)the National Key Research and Development Program of China(No.2017YFC0602403)the Fundamental Research Funds for the Central Universities,CHD(No.300102273301)。
文摘Quartz trace elements are extensively employed in studying magmatic evolution,fluid evolution,and metal enrichment.The Bianjiadayuan Ag-Pb-Zn-Sn deposit is a typical magmatichydrothermal system in northeastern China,however,studies on its complex magmatic-hydrothermal evolution are limited.This study investigates the quartz from the Bianjiadayuan deposit to gain insight into the physicochemical evolution of mineralization using cathodoluminescence(CL)textures and laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS)of quartz.Five types quartz(Q1 to Q5)were identified.From Q1 in quartz porphyry to Q5 in Ag-Pb-Zn veins,the CL intensity and Ti content gradually decreases,and Ge,Ge/Ti,and Al/Ti ratios increase,indicating a temperature decline from magmatic to hydrothermal stages.The Sb content shows an opposite trend to Ti content,correlating positively with Ge content in quartz,suggesting that Sb content could also be temperature-dependent.These trace elements in quartz indicate cooling is critical for Ag mineralization.Furthermore,quartz phenocryst(Q1)from the quartz porphyry shows low Al/Ti(mostly<4)and Ge/Ti ratios(<0.04),suggesting a low degree of magmatic evolution.The Sb content in Q5 from Ag-Pb-Zn-quartz veins(>1 ppm,mostly tens of ppm)is notably higher compared to quartz in other lithologies including Sn-bearing quartz veins(<1 ppm),suggesting that Sb contents can serve as an effective indicator of Ag mineralization.
基金Project supported by Next Generation EUMission 4,Component 1,CUP:J53D23007540006-PRIN_2022HYH95P。
文摘In this study,a pristine biochar(BCP)from dead Posidonia oceanica leaves,a by-product of biofuel production,and its two chemically activated forms with KOH(BBCP)and with H_(3)PO_(4)(ABCP)were tested as new adsorbent materials for the recovery of three rare earth cations(REE),namely La^(3+),Dy^(3+)and Nd^(3+)from aqueous solutions.The biochars were characterized through elemental analysis,nitrogen adsorption-desorption analysis,attenuated total reflectance-Fourier transform infrared(ATR-FT-IR)spectroscopy,scanning electron microscopy and energy dispersive X-ray spectroscopy(SEM-EDX),and pHpzcmeasurements.From single batch adsorption experiments at different pH values,the pH=5.0 was chosen as the best pH value for kinetic and isotherm adsorption studies.The effect of ionic medium on the adsorption ability of the best REE adsorbent ABCP was also evaluated by carrying out isotherm experiments in 0.1 mol/L NaNO3.Inductively coupled plasma optical emission spectroscopy(ICP-OES)was used to evaluate the REE concentration in the solutions.Kinetic and isotherm data of REE adsorption were tentatively subjected to regression analysis with various kinetic and isotherm equations.The parameter values of the best fit models and characterization results were analyzed to obtain information about the adsorption mechanism.The recyclability of ABCP adsorbent was also evaluated through recycle and reuse column experiments in which 0.1 mol/L HNO3and EDTA were used as extractant solutions.The chemical activation processes enhance the adsorption capacity of BCP by increasing the carbonization,the specific and microporous surface area,the pore volume and,in the case of activation with H_(3)PO_(4),introducing phosphate groups in the biochar structure.The promising REE recovery results obtained with ABCP transform the biochar from a by-product to a high value-added material.This contributes to making biofuel production a more cost-effective and environmentally-friendly process.
