Iron‐based pyrophosphates are attractive cathodes for sodium‐ion batteries due to their large framework,cost‐effectiveness,and high energy density.However,the understanding of the crystal structure is scarce and on...Iron‐based pyrophosphates are attractive cathodes for sodium‐ion batteries due to their large framework,cost‐effectiveness,and high energy density.However,the understanding of the crystal structure is scarce and only a limited candidates have been reported so far.In this work,we found for the first time that a continuous solid solution,Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2)(0≤α≤1,could be obtained by mutual substitution of cations at center‐symmetric Na3 and Na4 sites while keeping the crystal building blocks of anionic P_(2)O_(7) unchanged.In particular,a novel off‐stoichiometric Na_(3)Fe(2.5)(P_(2)O_(7))_(2)is thus proposed,and its structure,energy storage mechanism,and electrochemical performance are extensively investigated to unveil the structure–function relationship.The as‐prepared off‐stoichiometric electrode delivers appealing performance with a reversible discharge capacity of 83 mAh g^(−1),a working voltage of 2.9 V(vs.Na^(+)/Na),the retention of 89.2%of the initial capacity after 500 cycles,and enhanced rate capability of 51 mAh g^(−1)at a current density of 1600 mA g^(−1).This research shows that sodium ferric pyrophosphate could form extended solid solution composition and promising phase is concealed in the range of Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2),offering more chances for exploration of new cathode materials for the construction of high‐performance SIBs.展开更多
The homogeneous/particulate fluidization flow regime is particularly suitable for handling the various gas–solid contact processes encountered in the chemical and energy industry.This work aimed to extend such a regi...The homogeneous/particulate fluidization flow regime is particularly suitable for handling the various gas–solid contact processes encountered in the chemical and energy industry.This work aimed to extend such a regime of Geldart-A particles by exerting the axial uniform and steady magnetic field.Under the action of the magnetic field,the overall homogeneous fluidization regime of Geldart-A magnetizable particles became composed of two parts:inherent homogeneous fluidization and newly-created magnetic stabilization.Since the former remained almost unchanged whereas the latter became broader as the magnetic field intensity increased,the overall homogeneous fluidization regime could be extended remarkably.As for Geldart-A nonmagnetizable particles,certain amount of magnetizable particles had to be premixed to transmit the magnetic stabilization.Among others,the mere addition of magnetizable particles could broaden the homogeneous fluidization regime.The added content of magnetizable particles had an optimal value with smaller/lighter ones working better.The added magnetizable particles might raise the ratio between the interparticle force and the particle gravity.After the magnetic field was exerted,the homogeneous fluidization regime was further expanded due to the formation of magnetic stabilization flow regime.The more the added magnetizable particles,the better the magnetic performance and the broader the overall homogeneous fluidization regime.Smaller/lighter magnetizable particles were preferred to maximize the magnetic performance and extend the overall homogeneous fluidization regime.This phenomenon could be ascribed to that the added magnetizable particles themselves became more Geldart-A than-B type as their density or size decreased.展开更多
A continuous semisolid extending extrusion （CSEP） method was proposed. Temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube were studied. During the process, th...A continuous semisolid extending extrusion （CSEP） method was proposed. Temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube were studied. During the process, the temperature in the roll-shoe cavity decreases gradually, and the isothermal lines of the alloy deviate from the shoe side to the work roll side in the roll–shoe gap. Metal flow velocity decreases gradually from the surface of the work roll to the surface of the shoe. In the extrusion mould, alloy temperature decreases gradually from the entrance to the exit and from the center to the sidewall of the mould. The extending cavity is radially filled with the alloy. The flow lines in the tube corresponding to the centers of the splitflow orifices and the welding gaps are dense, and the corresponding harness values are high; there are 8 transitional bands between them. In order to prepare 6201 alloy tubes with good surface quality, the pouring temperature from 750 ℃ to 780 ℃ was suggested.展开更多
A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface ...A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.展开更多
The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end ...The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.展开更多
Designing visible light photocatalysts with a metal oxide semiconductor as the starting material could expand a new horizon for the conversion and storage of solar energy.Here,the benchmark photocatalyst TiO_(2) was u...Designing visible light photocatalysts with a metal oxide semiconductor as the starting material could expand a new horizon for the conversion and storage of solar energy.Here,the benchmark photocatalyst TiO_(2) was used to pursue this goal by anchoring aromatic acids.Extending the aromatic acid was strategically deployed to design TiO_(2) complexes with violet light-induced selective aerobic oxidation of sulfide as the probe reaction.With benzoic acid(BA)as the initial molecule,horizontally extending one or two benzene rings furnishes 2-naphthoic acid(2-NA)and 2-anthracene acid(2-AA).Moreover,triethylamine(TEA),an electron transfer mediator,was introduced to maintain the integrity of the anchored aromatic acids.Notably,there was a direct correlation between theπ-conjugation of aromatic acid ligand and the selective aerobic oxidation of sulfides.Among the three aromatic acids,2-AA delivered the best result over TiO_(2) due to the most extensiveπ-conjugated system.Ultimately,violet light-induced selective aerobic oxidation of sulfides into corresponding sulfoxides was conveniently realized by cooperative photocatalysis of 2-AA-TiO_(2) with 10 mol%of TEA.This work affords an extending strategy for designing the next-generation ligands for semiconductors to expand visible light-induced selective reactions.展开更多
A module Mis called generalized extending if for any submodule N of M, there is a direct summand K of M such that N≤K and KIN is singular. Any extending module and any singular module are generalized extending. Any h...A module Mis called generalized extending if for any submodule N of M, there is a direct summand K of M such that N≤K and KIN is singular. Any extending module and any singular module are generalized extending. Any homomorphic image of a generalized extending module is generalized extending. Any direct sum of a singular （uniform） module and a semi-simple module is generalized extending. A ring R is a right Co-H-ring if and only if all right R modules are generalized extending modules.展开更多
In recent years,Kaifeng Meteorological Bureau and Kaifeng Municipal Meteorological Society seriously think how to strengthen the construction of science popularization base,and take below measures improving the influe...In recent years,Kaifeng Meteorological Bureau and Kaifeng Municipal Meteorological Society seriously think how to strengthen the construction of science popularization base,and take below measures improving the influence of ＂ national science popularization education base＂ and further increasing the propaganda of meteorological popular science knowledge. Firstly,launching periodical meteorological science popularization into campus,village and community,and holding meteorological science forum; secondly,cooperating with municipal science association and Science and Technology Bureau,and jointly issuing the related documents of carrying out the propaganda of meteorological science popularization;thirdly,co-constructing campus weather station and meteorological science popularization demonstration community; fourthly,setting up special meteorological science lecture and report meeting; fifthly,integrating meteorological science with studies of Chinese ancient civilization based on innovation. In the form of recreation and loved by the masses,the propaganda of meteorological popular science knowledge is done well,and people recognizing,understanding,grasping and applying meteorological science is improved,thereby reaching the target of decreasing the damages of meteorological disaster to social economy and human life and property.展开更多
Continuous extruding/ extending formiug process for A2017 alloy in semi-solid state was proposed through installing extending die at the outlet of shearing- cooling- rolling （SCR） machine. A series of experiments to...Continuous extruding/ extending formiug process for A2017 alloy in semi-solid state was proposed through installing extending die at the outlet of shearing- cooling- rolling （SCR） machine. A series of experiments to produce fiat bar of A2017 alloy were carried oat. The forming process, metal flow behavior in die and microstructure and mechanical property of prodacts were investigated. It is shown that if the pouring temperature of melt was higher, the die was filled with semi-solid slurry with low solid fraction and periodical cracks would occur on the product surface ; If its pouring temperature was lower or the preheating temperature of die was lower, semisolid slurry would solidify rapidly and block the die after entering the cavity. The analysis of mass flow trace shows that the semi-solid slurry move forward layer by layer and fills the die extending cavity in radiation manner and the velocity of mass flow in the central area of extending cavity and exit of mould is the maximum, and then decreases gradually from the center to both sides of die wall. By inereasiug the die extending angle, the velocity of mass flow becomes more homogeneous. Under rational process control and die design, the A2017 fiat bar with transverse section of 10 × 50 mm and with good surface and fine equiaxed grains can be obtained by continuous extruding/extending forming process. The product＇s tensile strength and elongation are 420.5 MPa and 14.2% , respectively.展开更多
In an object-based storage system,a novel scheme named EAP(extending attributes page) is presented to enhance the metadata reliability of the system by adding the user object file information attributes page for each ...In an object-based storage system,a novel scheme named EAP(extending attributes page) is presented to enhance the metadata reliability of the system by adding the user object file information attributes page for each user object and storing the file-related attributes of each user object in object-based storage devices.The EAP scheme requires no additional hardware equipments compared to a general method which uses backup metadata servers to improve the metadata reliability.Leveraging a Markov chain,this paper compares the metadata reliability of the system using the EAP scheme with that using only metadata servers to offer the file metadata service.Our results demonstrate that the EAP scheme can dramatically enhance the reliability of storage system metadata.展开更多
A commutative ring R is called extending if every ideal is essential in a direct summand of RR. The following results are proved： （1） C（X） is an extending ring if and only if X is extremely disconnected; （2） S...A commutative ring R is called extending if every ideal is essential in a direct summand of RR. The following results are proved： （1） C（X） is an extending ring if and only if X is extremely disconnected; （2） Spec（R） is extremely disconnected and R is semiprime if and only if R is a nonsingular extending ring; （3） Spec（R） is extremely disconnected if and only if R/N（R） is an extending ring, where N（R） consists of all nilpotent elements of R. As an application, it is also shown that any Gelfand nonsingular extending ring is clean.展开更多
The purpose of using life extending control for Black Hawk UH-60 helicopter is to make a trade-off between the handling qualities and the service life of critical components. An increase in service life span results i...The purpose of using life extending control for Black Hawk UH-60 helicopter is to make a trade-off between the handling qualities and the service life of critical components. An increase in service life span results in enhanced safety and the reduction in maintenance costs. This paper presents a design methodology of life extending control for structural durability and high performance of mechanical system, which is based on an explicit dynamic inversion control scheme. A real-time nonlinear fatigue crack growth model is built to predict fatigue damage resulting from the impact of cyclic bending stress on rotor shaft, which serves as an indicator of service life. The 4-axis gainscheduled flight controller, whose gains are adjusted as a function of damage and flight velocity, is designed to regulate roll attitude, pitch attitude, vertical velocity and yaw rate. The nonlinear system simulation results show that the responses can meet the requirements on ADS-33 Level 1 handling qualities and that the 4-axis decoupling control is realized. As the damage increases, the tracking performance is slightly degraded, which results in smaller transients in bending moment response.展开更多
Focusing on the extending length restriction of the completion screen pipe resistance running into ultra-short radius horizontal well,this paper proposed technology of hydraulic drive completion tubular string running...Focusing on the extending length restriction of the completion screen pipe resistance running into ultra-short radius horizontal well,this paper proposed technology of hydraulic drive completion tubular string running into ultra-short radius horizontal well.Innovative hydraulic drive tools and string structure are designed,which are composed of guide tubing,hydraulic drive tubing and non-metallic completion screen pipe from inside to outside.A novel mechanical-hydraulic coupling model is established.Based on the wellbore structure of an ultra-short radius horizontal well for deep coalbed methane,the numerical calculations of force and hydraulic load on tubular strings were accomplished by the mechanical-hydraulic coupling model.The results show that the extending length of completion tubular string with the hydraulic drive is 17 times that of conventional completion technology under the same conditions.The multi-factor orthogonal design is adopted to analyze the numerical calculations,and the results show that the extending length of the completion tubular string is mainly affected by the completion tubular string structure and the friction coefficient between the non-metallic composite continuous screen pipe and the wellbore.Two series of hydraulic drive completion tubular string structures suitable for ultra-short radius horizontal wells under different conditions are optimized,with the extending limits of 381 m and 655 m,respectively.These researches will provide theoretical guidance for design and control of hydraulic drive non-metallic composite continuous completion screen pipe running into ultra-short radius horizontal wells.展开更多
Stable operating region in the HL-1M tokamak has been extended by means of wall conditioning, core fuelling and current control techniques. The mechanisms of the extension are analyzed in this paper. Lithiumization di...Stable operating region in the HL-1M tokamak has been extended by means of wall conditioning, core fuelling and current control techniques. The mechanisms of the extension are analyzed in this paper. Lithiumization diminishes the impurities and hydrogen recycling to the lowest level. After lithiumization a high density up to 7×1019 m-3 was obtained easily by strong gas puffing with ordinary ohmic discharge alone. More attractively we found that metal Li-coating exhibited the effects of wall stabilization. The low qα limit with higher density was extended by a factor of 1.5-2 in comparison with that for boronization, and 1.2 for siliconization. Siliconization not only extended stable operating region significantly by itself, but also provided a good target plasma for other experiments of raising density limit. Core fuelling schemes are favourable especially for siliconized wall with a higher level of medium-Z impurity (Z = 14). After siliconization the maximum density near to 1020 m-3 was achieved by a combination of supersonic molecule beam injection and multipellet injection. The new defined slope of Hugill limit illustrating more clearly the situation under low qα and high ne discharges was created to indicate the new region extended by combining IP ramp-up with core fuelling. The slope with a large Murakami coefficient increased by a factor of 50-60 %.展开更多
基金National Natural Science Foundation of China,Grant/Award Numbers:21972108,U20A20249,U22A20438Changzhou Science and Technology Bureau,Grant/Award Number:CM20223017Innovation and Technology Commission(ITC)of Hong Kong,The Innovation&Technology Fund(ITF)with Project No.ITS/126/21。
文摘Iron‐based pyrophosphates are attractive cathodes for sodium‐ion batteries due to their large framework,cost‐effectiveness,and high energy density.However,the understanding of the crystal structure is scarce and only a limited candidates have been reported so far.In this work,we found for the first time that a continuous solid solution,Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2)(0≤α≤1,could be obtained by mutual substitution of cations at center‐symmetric Na3 and Na4 sites while keeping the crystal building blocks of anionic P_(2)O_(7) unchanged.In particular,a novel off‐stoichiometric Na_(3)Fe(2.5)(P_(2)O_(7))_(2)is thus proposed,and its structure,energy storage mechanism,and electrochemical performance are extensively investigated to unveil the structure–function relationship.The as‐prepared off‐stoichiometric electrode delivers appealing performance with a reversible discharge capacity of 83 mAh g^(−1),a working voltage of 2.9 V(vs.Na^(+)/Na),the retention of 89.2%of the initial capacity after 500 cycles,and enhanced rate capability of 51 mAh g^(−1)at a current density of 1600 mA g^(−1).This research shows that sodium ferric pyrophosphate could form extended solid solution composition and promising phase is concealed in the range of Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2),offering more chances for exploration of new cathode materials for the construction of high‐performance SIBs.
基金supported by Shandong Provincial Natural Science Foundation (ZR2023MB038)National Natural Science Foundation of China (21808232 and 21978143)Financial support from the Qingdao University of Science and Technology
文摘The homogeneous/particulate fluidization flow regime is particularly suitable for handling the various gas–solid contact processes encountered in the chemical and energy industry.This work aimed to extend such a regime of Geldart-A particles by exerting the axial uniform and steady magnetic field.Under the action of the magnetic field,the overall homogeneous fluidization regime of Geldart-A magnetizable particles became composed of two parts:inherent homogeneous fluidization and newly-created magnetic stabilization.Since the former remained almost unchanged whereas the latter became broader as the magnetic field intensity increased,the overall homogeneous fluidization regime could be extended remarkably.As for Geldart-A nonmagnetizable particles,certain amount of magnetizable particles had to be premixed to transmit the magnetic stabilization.Among others,the mere addition of magnetizable particles could broaden the homogeneous fluidization regime.The added content of magnetizable particles had an optimal value with smaller/lighter ones working better.The added magnetizable particles might raise the ratio between the interparticle force and the particle gravity.After the magnetic field was exerted,the homogeneous fluidization regime was further expanded due to the formation of magnetic stabilization flow regime.The more the added magnetizable particles,the better the magnetic performance and the broader the overall homogeneous fluidization regime.Smaller/lighter magnetizable particles were preferred to maximize the magnetic performance and extend the overall homogeneous fluidization regime.This phenomenon could be ascribed to that the added magnetizable particles themselves became more Geldart-A than-B type as their density or size decreased.
基金Projects (51034002, 50974038) supported by the National Natural Science Foundation of ChinaProject (132002) supported by the Fok Ying Tong Education FoundationProject (2011CB610405) supported by National Basic Research Program of China
文摘A continuous semisolid extending extrusion （CSEP） method was proposed. Temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube were studied. During the process, the temperature in the roll-shoe cavity decreases gradually, and the isothermal lines of the alloy deviate from the shoe side to the work roll side in the roll–shoe gap. Metal flow velocity decreases gradually from the surface of the work roll to the surface of the shoe. In the extrusion mould, alloy temperature decreases gradually from the entrance to the exit and from the center to the sidewall of the mould. The extending cavity is radially filled with the alloy. The flow lines in the tube corresponding to the centers of the splitflow orifices and the welding gaps are dense, and the corresponding harness values are high; there are 8 transitional bands between them. In order to prepare 6201 alloy tubes with good surface quality, the pouring temperature from 750 ℃ to 780 ℃ was suggested.
基金This project is financially supported by State Key Fundamental Research of "973" Development Plan (No. G2000067208-4)
文摘A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.
文摘The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.
基金funded by the National Natural Science Foundation of China(Nos.22072108 and 21773173)。
文摘Designing visible light photocatalysts with a metal oxide semiconductor as the starting material could expand a new horizon for the conversion and storage of solar energy.Here,the benchmark photocatalyst TiO_(2) was used to pursue this goal by anchoring aromatic acids.Extending the aromatic acid was strategically deployed to design TiO_(2) complexes with violet light-induced selective aerobic oxidation of sulfide as the probe reaction.With benzoic acid(BA)as the initial molecule,horizontally extending one or two benzene rings furnishes 2-naphthoic acid(2-NA)and 2-anthracene acid(2-AA).Moreover,triethylamine(TEA),an electron transfer mediator,was introduced to maintain the integrity of the anchored aromatic acids.Notably,there was a direct correlation between theπ-conjugation of aromatic acid ligand and the selective aerobic oxidation of sulfides.Among the three aromatic acids,2-AA delivered the best result over TiO_(2) due to the most extensiveπ-conjugated system.Ultimately,violet light-induced selective aerobic oxidation of sulfides into corresponding sulfoxides was conveniently realized by cooperative photocatalysis of 2-AA-TiO_(2) with 10 mol%of TEA.This work affords an extending strategy for designing the next-generation ligands for semiconductors to expand visible light-induced selective reactions.
基金Project (No. 102028) supported by the Natural Science Foundation of Zhejiang Province, China
文摘A module Mis called generalized extending if for any submodule N of M, there is a direct summand K of M such that N≤K and KIN is singular. Any extending module and any singular module are generalized extending. Any homomorphic image of a generalized extending module is generalized extending. Any direct sum of a singular （uniform） module and a semi-simple module is generalized extending. A ring R is a right Co-H-ring if and only if all right R modules are generalized extending modules.
文摘In recent years,Kaifeng Meteorological Bureau and Kaifeng Municipal Meteorological Society seriously think how to strengthen the construction of science popularization base,and take below measures improving the influence of ＂ national science popularization education base＂ and further increasing the propaganda of meteorological popular science knowledge. Firstly,launching periodical meteorological science popularization into campus,village and community,and holding meteorological science forum; secondly,cooperating with municipal science association and Science and Technology Bureau,and jointly issuing the related documents of carrying out the propaganda of meteorological science popularization;thirdly,co-constructing campus weather station and meteorological science popularization demonstration community; fourthly,setting up special meteorological science lecture and report meeting; fifthly,integrating meteorological science with studies of Chinese ancient civilization based on innovation. In the form of recreation and loved by the masses,the propaganda of meteorological popular science knowledge is done well,and people recognizing,understanding,grasping and applying meteorological science is improved,thereby reaching the target of decreasing the damages of meteorological disaster to social economy and human life and property.
基金Funded by the National Natural Science Foundation of China(No.50274020) and Baoshan Iron &Steel Corporation of Shanghai
文摘Continuous extruding/ extending formiug process for A2017 alloy in semi-solid state was proposed through installing extending die at the outlet of shearing- cooling- rolling （SCR） machine. A series of experiments to produce fiat bar of A2017 alloy were carried oat. The forming process, metal flow behavior in die and microstructure and mechanical property of prodacts were investigated. It is shown that if the pouring temperature of melt was higher, the die was filled with semi-solid slurry with low solid fraction and periodical cracks would occur on the product surface ; If its pouring temperature was lower or the preheating temperature of die was lower, semisolid slurry would solidify rapidly and block the die after entering the cavity. The analysis of mass flow trace shows that the semi-solid slurry move forward layer by layer and fills the die extending cavity in radiation manner and the velocity of mass flow in the central area of extending cavity and exit of mould is the maximum, and then decreases gradually from the center to both sides of die wall. By inereasiug the die extending angle, the velocity of mass flow becomes more homogeneous. Under rational process control and die design, the A2017 fiat bar with transverse section of 10 × 50 mm and with good surface and fine equiaxed grains can be obtained by continuous extruding/extending forming process. The product＇s tensile strength and elongation are 420.5 MPa and 14.2% , respectively.
基金supported by the National Natural Science Foundation of China (No.60873028)the National Basic Research Program (973) of China (No.2004CB318201)+1 种基金the Program for New Century Excellent Talents in University (No.NCET-04-0693)the Innovational Group Project (No.IRT0725),China
文摘In an object-based storage system,a novel scheme named EAP(extending attributes page) is presented to enhance the metadata reliability of the system by adding the user object file information attributes page for each user object and storing the file-related attributes of each user object in object-based storage devices.The EAP scheme requires no additional hardware equipments compared to a general method which uses backup metadata servers to improve the metadata reliability.Leveraging a Markov chain,this paper compares the metadata reliability of the system using the EAP scheme with that using only metadata servers to offer the file metadata service.Our results demonstrate that the EAP scheme can dramatically enhance the reliability of storage system metadata.
基金supported by National Natural Science Foundation of China (10671122)supported by Collegial Natural Science Research Program of Education Department of Jiangsu Province (07KJD110179)
文摘A commutative ring R is called extending if every ideal is essential in a direct summand of RR. The following results are proved： （1） C（X） is an extending ring if and only if X is extremely disconnected; （2） Spec（R） is extremely disconnected and R is semiprime if and only if R is a nonsingular extending ring; （3） Spec（R） is extremely disconnected if and only if R/N（R） is an extending ring, where N（R） consists of all nilpotent elements of R. As an application, it is also shown that any Gelfand nonsingular extending ring is clean.
基金Supported by the National Natural Science Foundation of China(No.61170328)
文摘The purpose of using life extending control for Black Hawk UH-60 helicopter is to make a trade-off between the handling qualities and the service life of critical components. An increase in service life span results in enhanced safety and the reduction in maintenance costs. This paper presents a design methodology of life extending control for structural durability and high performance of mechanical system, which is based on an explicit dynamic inversion control scheme. A real-time nonlinear fatigue crack growth model is built to predict fatigue damage resulting from the impact of cyclic bending stress on rotor shaft, which serves as an indicator of service life. The 4-axis gainscheduled flight controller, whose gains are adjusted as a function of damage and flight velocity, is designed to regulate roll attitude, pitch attitude, vertical velocity and yaw rate. The nonlinear system simulation results show that the responses can meet the requirements on ADS-33 Level 1 handling qualities and that the 4-axis decoupling control is realized. As the damage increases, the tracking performance is slightly degraded, which results in smaller transients in bending moment response.
基金Supported by the Innovative Research Group Project of China National Natural Science Foundation(51821092)Key Project of China National Natural Science Foundation(U1762214).
文摘Focusing on the extending length restriction of the completion screen pipe resistance running into ultra-short radius horizontal well,this paper proposed technology of hydraulic drive completion tubular string running into ultra-short radius horizontal well.Innovative hydraulic drive tools and string structure are designed,which are composed of guide tubing,hydraulic drive tubing and non-metallic completion screen pipe from inside to outside.A novel mechanical-hydraulic coupling model is established.Based on the wellbore structure of an ultra-short radius horizontal well for deep coalbed methane,the numerical calculations of force and hydraulic load on tubular strings were accomplished by the mechanical-hydraulic coupling model.The results show that the extending length of completion tubular string with the hydraulic drive is 17 times that of conventional completion technology under the same conditions.The multi-factor orthogonal design is adopted to analyze the numerical calculations,and the results show that the extending length of the completion tubular string is mainly affected by the completion tubular string structure and the friction coefficient between the non-metallic composite continuous screen pipe and the wellbore.Two series of hydraulic drive completion tubular string structures suitable for ultra-short radius horizontal wells under different conditions are optimized,with the extending limits of 381 m and 655 m,respectively.These researches will provide theoretical guidance for design and control of hydraulic drive non-metallic composite continuous completion screen pipe running into ultra-short radius horizontal wells.
文摘Stable operating region in the HL-1M tokamak has been extended by means of wall conditioning, core fuelling and current control techniques. The mechanisms of the extension are analyzed in this paper. Lithiumization diminishes the impurities and hydrogen recycling to the lowest level. After lithiumization a high density up to 7×1019 m-3 was obtained easily by strong gas puffing with ordinary ohmic discharge alone. More attractively we found that metal Li-coating exhibited the effects of wall stabilization. The low qα limit with higher density was extended by a factor of 1.5-2 in comparison with that for boronization, and 1.2 for siliconization. Siliconization not only extended stable operating region significantly by itself, but also provided a good target plasma for other experiments of raising density limit. Core fuelling schemes are favourable especially for siliconized wall with a higher level of medium-Z impurity (Z = 14). After siliconization the maximum density near to 1020 m-3 was achieved by a combination of supersonic molecule beam injection and multipellet injection. The new defined slope of Hugill limit illustrating more clearly the situation under low qα and high ne discharges was created to indicate the new region extended by combining IP ramp-up with core fuelling. The slope with a large Murakami coefficient increased by a factor of 50-60 %.
