Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attrac...Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).展开更多
The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are...The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are required in the process of plant supplementing light,arrow-band emitting phosphors are applied to backlight displays,etc.In this work,a Bi^(3+)-activated blue phosphor was obtained in a symmetrical and co mpact crystal structure of Gd3Sb07(GSO).Then,the co-doping strategy of alkali metal ions(Li^(+),Na^(+),and K^(+))was used to optimize the performance.The result shows that the photoluminescence intensity is increased by 2.1 times and 1.3 times respectively by introducing Li~+and K^(+)ions.Not only that,it also achieves narrow-band emitting with the full width of half-maximum(FWHM)reaching 42 nm through Na^(+)doping,and its excitation peak position also shifts from 322 to 375 nm,which can be well excited by near-ultraviolet(NUV)light emitting diode(LED)chips(365 nm).Meanwhile,the electroluminescence spectrum of GSO:0.6 mol%Bi^(3+),3 wt%Na^(+)matches up to 93.39%of the blue part of the absorption spectrum of chlorophyll a.In summary,the Bi^(3+)-activated blue phosphor reported in this work can synchronously meet the requirements of plant light replenishment and field emission displays.展开更多
The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs b...The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs based on M-EMLs separated by polyethyleneimine ethoxylated(PEIE)layer with different stacking sequences of blue(B),green(G),and red(R)QDs layer were used to intuitively explore the injection,transportation and recombination processes of the charge carriers in QLEDs by using the time-resolved electroluminescence(TrEL)spectra.From the TrEL spectra mea-surements,green and red emissions were obtained first in the QLEDs with the EMLs sequences of G/PEIE/B/PEIE/R and B/PEIE/R/PEIE/G along the direction of light emission,respectively.While the QLEDs adopt EMLs sequences of B/PEIE/G/PEIE/R,the blue,green and red emissions were obtained nearly at the same time.The above phenomenon can be attributed to different charge carrier transmission and radiation recombination process in the EMLs due to different valence band offsets and conduction band offsets between R-,G-and B-QDs by using different sequences of EMLs.White emission with coordi-nates of(0.31,0.31)and correlated color temperature(CCT)of 5916 K was obtained in the QLEDs with the EMLs se-quences of B/PEIE/G/PEIE/R,which can be attributed to the relative uniform emission of B-,G-and R-QDs due to the effec-tive injection and radiation recombination of charge carriers in each of the EMLs.The above results have great significance for further understanding and improving the performance of QLEDs with M-EMLs.展开更多
Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is inf...Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is influenced by genotype,explant type,and environmental conditions.To overcome these issues,this study uses different machine learning-based predictive models by employing multiple input factors.Cotyledonary node explants of two commercial cotton cultivars(STN-468 and GSN-12)were isolated from 7–8 days old seedlings,preconditioned with 5,10,and 20 mg·L^(-1) kinetin(KIN)for 10 days.Thereafter,explants were postconditioned on full Murashige and Skoog(MS),1/2MS,1/4MS,and full MS+0.05 mg·L^(-1) KIN,cultured in growth room enlightened with red and blue light-emitting diodes(LED)combination.Statistical analysis(analysis of variance,regression analysis)was employed to assess the impact of different treatments on shoot regeneration,with artificial intelligence(AI)models used for confirming the findings.Results GSN-12 exhibited superior shoot regeneration potential compared with STN-468,with an average of 4.99 shoots per explant versus 3.97.Optimal results were achieved with 5 mg·L^(-1) KIN preconditioning,1/4MS postconditioning,and 80%red LED,with maximum of 7.75 shoot count for GSN-12 under these conditions;while STN-468 reached 6.00 shoots under the conditions of 10 mg·L^(-1) KIN preconditioning,MS with 0.05 mg·L^(-1) KIN(postconditioning)and 75.0%red LED.Rooting was successfully achieved with naphthalene acetic acid and activated charcoal.Additionally,three different powerful AI-based models,namely,extreme gradient boost(XGBoost),random forest(RF),and the artificial neural network-based multilayer perceptron(MLP)regression models validated the findings.Conclusion GSN-12 outperformed STN-468 with optimal results from 5 mg·L^(-1) KIN+1/4MS+80%red LED.Application of machine learning-based prediction models to optimize cotton tissue culture protocols for shoot regeneration is helpful to improve cotton regeneration efficiency.展开更多
In recent years,perovskite light-emitting diodes have witnessed a remarkable evolution in both efficiency and luminance levels.Nonetheless,the production of such devices typically relies on protracted synthesis proced...In recent years,perovskite light-emitting diodes have witnessed a remarkable evolution in both efficiency and luminance levels.Nonetheless,the production of such devices typically relies on protracted synthesis procedures at elevated temperatures and vacuum/inert conditions(e.g.hot-injection synthesis),thus rendering them technically unsuitable for extensive display and/or lighting applications manufacturing.Although alternative synthetic protocols have been proposed,e.g.ligand-assisted reprecipitation,ultrasonic and microwave-based methods,their suitability for the construction of high-performing light-emitting diodes has been reported in only a few studies.In this study,we demonstrate the fabrication of highly efficient lighting devices based on CsPbBr3 colloidal perovskite nanocrystals synthesized by a fast,energetically efficient,and up-scalable microwave-assisted method.These nanocrystals exhibit an impressive photoluminescence quantum yield of 66.8%after purification,with a very narrow PL spectrum centered at 514 nm with a full width at half-maximum of 20 nm.Similarly,the PeLEDs achieve a maximum external quantum efficiency of 23.4%,a maximum current efficiency of 71.6 Cd A^(-1),and a maximum luminance level that exceeds 4.7×10^(4) Cdm^(-2).Additionally,a significantly lower energy consumption for microwave-mediated synthesis compared with hot injection is demonstrated.These findings suggest that this synthetic procedure emerges as an outstanding and promising method towards a scalable and sustainable fabrication of high-quality perovskite light-emitting diodes.展开更多
Blue-light emitting materials with high purity and good luminous efficiency have attracted considerable attention from both academic and commercial researchers for their great potential use in OLEDs.In order to improv...Blue-light emitting materials with high purity and good luminous efficiency have attracted considerable attention from both academic and commercial researchers for their great potential use in OLEDs.In order to improve thermal stability and lower the possibility to generate fluorescence quenching of organic blue-light emitting materials formed by carbazole,a linear organic molecule containing carbazole and triarylamine group,named N4,N4’-bis(9-ethyl-9H-carbazol-3-yl)-N4,N4’-diphenyl-[1,1’-biphenyl]-4,4’-diamine(DPECB),was synthesized via the Buchwald-Hartwig reaction.The structure of DPECB was characterized by nuclear magnetic resonance(NMR)and infrared spectroscopy.The UV-Vis absorption spectrum shows that DPECB exhibits two strong absorption peaks in the near ultraviolet region(around 305 and 355 nm).The fluorescence emission spectrum indicates that DPECB displays blue light emission both in solution(428-445 nm)and solid-state(466 nm).Additionally,DPECB shows clearly aggregation-induced emission enhancement(AIEE)effect in the mixed solvent of DMF/H2O.As the thermogravimetric analysis shows,DPECB demonstrates excellent thermostability with a 5%decomposition temperature of 457℃owing to the introduction of triarylamine group.The electrochemical property of DPECB was studied through cyclic voltammetry,and its HOMO and LUMO energy levels are-5.27 and-2.25 eV,respectively.These results indicate that DPECB is a promising blue-light emitting material with potential commercial applications.展开更多
This study analyzes the influence of green bonds on carbon neutrality.It examines the daily data of sectoral CO_(2) emissions of the top five CO_(2)-emitting nations from January 2,2019 to December 30,2022 using wavel...This study analyzes the influence of green bonds on carbon neutrality.It examines the daily data of sectoral CO_(2) emissions of the top five CO_(2)-emitting nations from January 2,2019 to December 30,2022 using wavelet transform coherence,quantile-onquantile regression,Granger causality in quantiles,and quantile regression approaches.The results revealed that(i)green bonds are strongly related to sectoral CO_(2) emissions;(ii)green bonds reduce transport sector CO_(2) emissions in China,the US,and Japan while causing an upsurge in India and Russia;(iii)green bonds reduce industrial sector CO_(2) emissions only in the US;(iv)green bonds have a declining influence in energy sector CO_(2) emissions at lower quantiles in India,China,and the US,whereas the impact increases at higher quantiles;and(v)green bonds decrease residential sector CO_(2) emissions in the US,Russia,and Japan.The study revealed that green bonds help reduce CO_(2) emissions in the residential sector in various quantiles.Therefore,the US,Russia,and Japan should raise household awareness of green energy utilization by promoting them with green bonds.In addition,green bonds can effectively reduce transportation sector CO_(2) emissions in China and the US.Therefore,the policymakers of the two global powers should contribute to global CO_(2) reduction by promoting green transportation and clean energy transition in the transportation sector through green bonds.Thus,green bonds can play an effective role in the fight against global warming.展开更多
A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,0...A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.展开更多
A series of novel red-emitting BaLiZn_(3)(BO_(3))_(3):Eu^(3+)phosphors were synthesized through the high temperature solid state reaction method.The phase composition,crystal structure,morphology and photo luminescenc...A series of novel red-emitting BaLiZn_(3)(BO_(3))_(3):Eu^(3+)phosphors were synthesized through the high temperature solid state reaction method.The phase composition,crystal structure,morphology and photo luminescence property of the BaLiZn_(3)(BO_(3))_(3):Eu^(3+)samples were systematically investigated.The phosphor can be efficiently excited by the near ultraviolet light(NUV)of 396 nm and blue light of 466 nm,and give out red light emission at 618 nm corresponding to the electric dipole transition(^(5)D_(0)→^(7)E_(2)).The optimal doping concentration of Eu^(3+)ions in BaLiZn_(3)(BO_(3))_(3)is determined to be about 3 mol%,and the concentration-quenching phenomenon arise from the electric dipole-dipole interaction.The temperature dependent luminescence behavior of BaLiZn_(3)(BO_(3))_(3):0.03 Eu^(3+)phosphor exhibits its good thermal stability,and the activation energy for thermal quenching characteristics is calculated to be 0.1844 eV.The decay lifetime of the BaLiZn_(3)(BO_(3))_(3):0.03 Eu^(3+)is measured to be 1.88 ms.These results suggest that the BaLiZn_(3)(BO_(3))_(3):Eu^(3+)phosphors have the potential application as a red component in white light emitting diodes(WLEDs)with NUV or blue chips.展开更多
We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent devi...We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.展开更多
Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED conta...Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.展开更多
Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue therm...Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.展开更多
Lateral oxidation in vertical cavity surface emitting lasers （VCSELs） is described,and its characteristics are investigated.A linear growth law is found for stripe mesas. However, oxide growth （above 435℃ ） follo...Lateral oxidation in vertical cavity surface emitting lasers （VCSELs） is described,and its characteristics are investigated.A linear growth law is found for stripe mesas. However, oxide growth （above 435℃ ） follows a nonlinear law for the two geometry mesa structures which we employ in VCSEL. Theoretical analysis indicates that mesa structure geometry influences oxide growth rate at higher temperatures.展开更多
In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-op...In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-optimized ZnS out-coupling layer.With a 24-nm out-coupling layer,the reflectivity of the cathode is reduced to 8% at 492 nm and the mean reflectivity is 24% in the visible area.By introducing an efficient electron blocking layer tris（1phenylpyrazolato,N,C2 ＇）iridium（III）（Ir（ppz） 3） to confine the exciton recombination area,the current efficiency and the colour stability of the device are effectively improved.A white emission with the Ir（ppz） 3 layer exhibits a maximum current efficiency of 9.8 cd/A at 8 V,and the Commission Internationale de L＇Eclairage（CIE） chromaticity coordinates are almost constant during a large voltage change of 6 V-11 V.There is almost no viewing angular dependence in the spectrum when the viewing angle is no more than 45,with a CIE x,y coordinate variation of only（±0.0025,±0.0008）.Even at a large viewing angle（75）,the CIE x,y coordinate change is as small as（±0.0087,±0.0013）.展开更多
We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-...We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-benzidine（NPB） and electron transporting layer（ETL） 4,7-diphnenyl-1,10-phenanthroline（BPhen）,into which a new blue material,DNCA（a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine）,is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency（η max） of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L＇Eclairage（CIE） coordinates of this device change slightly from（0.13,0.27） to（0.13,0.23） as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.展开更多
Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail ...Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at Ionger wavelengths)of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also beimproved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, theexcimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue ligh both in solution and in film. The optical propertiesare dependent on the substituion on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL andgood thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure couldbe tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complexat the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emissionwith a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with differentsubstitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physicalproperties of the polymers.展开更多
基金funded by National Key R&D Program of China(Grant Nos.2024YFB3612200,2023YFB3609601,2022YFB3604300,2022YFB2802801,2022YFB3604802)Natural Science Foundation of China(Grant Nos.U24A20300,62174174,62274177,62275263,62325406,62374172,62304242,62304240,62404241)+4 种基金Youth Innovation Promotion Association of CAS(Grant Nos.2022323 and 2022324)Key R&D Program of Jiangsu Province(Grant No.BE2023018-2)Basic Research Program of Jiangsu(Grant No.BK20240126)Suzhou Science and Technology Program(Grant Nos.SYC2022089,ZXL2024379,and ZXL2024376)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2022A1515110482 and 2022A1515110004).
文摘Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).
基金Project supported by the Key R&D Projects in Hunan Province(2021SK2047,2022NK2044)Science and Technology Innovation Program of Hunan Province(2022WZ1022)Superior Youth Project of the Science Research Project of Hunan Provincial Department of Education(22B0211)。
文摘The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are required in the process of plant supplementing light,arrow-band emitting phosphors are applied to backlight displays,etc.In this work,a Bi^(3+)-activated blue phosphor was obtained in a symmetrical and co mpact crystal structure of Gd3Sb07(GSO).Then,the co-doping strategy of alkali metal ions(Li^(+),Na^(+),and K^(+))was used to optimize the performance.The result shows that the photoluminescence intensity is increased by 2.1 times and 1.3 times respectively by introducing Li~+and K^(+)ions.Not only that,it also achieves narrow-band emitting with the full width of half-maximum(FWHM)reaching 42 nm through Na^(+)doping,and its excitation peak position also shifts from 322 to 375 nm,which can be well excited by near-ultraviolet(NUV)light emitting diode(LED)chips(365 nm).Meanwhile,the electroluminescence spectrum of GSO:0.6 mol%Bi^(3+),3 wt%Na^(+)matches up to 93.39%of the blue part of the absorption spectrum of chlorophyll a.In summary,the Bi^(3+)-activated blue phosphor reported in this work can synchronously meet the requirements of plant light replenishment and field emission displays.
文摘The charge carrier transport and recombination dynamics in the quantum dots-based light-emitting diodes(QLEDs)featuring multiple emitting layers(M-EMLs)has a great impact on the device performance.In this work,QLEDs based on M-EMLs separated by polyethyleneimine ethoxylated(PEIE)layer with different stacking sequences of blue(B),green(G),and red(R)QDs layer were used to intuitively explore the injection,transportation and recombination processes of the charge carriers in QLEDs by using the time-resolved electroluminescence(TrEL)spectra.From the TrEL spectra mea-surements,green and red emissions were obtained first in the QLEDs with the EMLs sequences of G/PEIE/B/PEIE/R and B/PEIE/R/PEIE/G along the direction of light emission,respectively.While the QLEDs adopt EMLs sequences of B/PEIE/G/PEIE/R,the blue,green and red emissions were obtained nearly at the same time.The above phenomenon can be attributed to different charge carrier transmission and radiation recombination process in the EMLs due to different valence band offsets and conduction band offsets between R-,G-and B-QDs by using different sequences of EMLs.White emission with coordi-nates of(0.31,0.31)and correlated color temperature(CCT)of 5916 K was obtained in the QLEDs with the EMLs se-quences of B/PEIE/G/PEIE/R,which can be attributed to the relative uniform emission of B-,G-and R-QDs due to the effec-tive injection and radiation recombination of charge carriers in each of the EMLs.The above results have great significance for further understanding and improving the performance of QLEDs with M-EMLs.
文摘Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is influenced by genotype,explant type,and environmental conditions.To overcome these issues,this study uses different machine learning-based predictive models by employing multiple input factors.Cotyledonary node explants of two commercial cotton cultivars(STN-468 and GSN-12)were isolated from 7–8 days old seedlings,preconditioned with 5,10,and 20 mg·L^(-1) kinetin(KIN)for 10 days.Thereafter,explants were postconditioned on full Murashige and Skoog(MS),1/2MS,1/4MS,and full MS+0.05 mg·L^(-1) KIN,cultured in growth room enlightened with red and blue light-emitting diodes(LED)combination.Statistical analysis(analysis of variance,regression analysis)was employed to assess the impact of different treatments on shoot regeneration,with artificial intelligence(AI)models used for confirming the findings.Results GSN-12 exhibited superior shoot regeneration potential compared with STN-468,with an average of 4.99 shoots per explant versus 3.97.Optimal results were achieved with 5 mg·L^(-1) KIN preconditioning,1/4MS postconditioning,and 80%red LED,with maximum of 7.75 shoot count for GSN-12 under these conditions;while STN-468 reached 6.00 shoots under the conditions of 10 mg·L^(-1) KIN preconditioning,MS with 0.05 mg·L^(-1) KIN(postconditioning)and 75.0%red LED.Rooting was successfully achieved with naphthalene acetic acid and activated charcoal.Additionally,three different powerful AI-based models,namely,extreme gradient boost(XGBoost),random forest(RF),and the artificial neural network-based multilayer perceptron(MLP)regression models validated the findings.Conclusion GSN-12 outperformed STN-468 with optimal results from 5 mg·L^(-1) KIN+1/4MS+80%red LED.Application of machine learning-based prediction models to optimize cotton tissue culture protocols for shoot regeneration is helpful to improve cotton regeneration efficiency.
基金partially supported by LUZ PDC2022-133612-100 and PLEDS PID2022-140090OB funded by MCIN/AEIPROMETEO Program from Generalitat Valenciana (Q-Solutions project reference CIPROM/2021/078)+1 种基金the financial support from Universitat Jaume I (project UJIB2021-50)Generalitat Valenciana for her PhD contract (GRISOLIAP/2021/096)
文摘In recent years,perovskite light-emitting diodes have witnessed a remarkable evolution in both efficiency and luminance levels.Nonetheless,the production of such devices typically relies on protracted synthesis procedures at elevated temperatures and vacuum/inert conditions(e.g.hot-injection synthesis),thus rendering them technically unsuitable for extensive display and/or lighting applications manufacturing.Although alternative synthetic protocols have been proposed,e.g.ligand-assisted reprecipitation,ultrasonic and microwave-based methods,their suitability for the construction of high-performing light-emitting diodes has been reported in only a few studies.In this study,we demonstrate the fabrication of highly efficient lighting devices based on CsPbBr3 colloidal perovskite nanocrystals synthesized by a fast,energetically efficient,and up-scalable microwave-assisted method.These nanocrystals exhibit an impressive photoluminescence quantum yield of 66.8%after purification,with a very narrow PL spectrum centered at 514 nm with a full width at half-maximum of 20 nm.Similarly,the PeLEDs achieve a maximum external quantum efficiency of 23.4%,a maximum current efficiency of 71.6 Cd A^(-1),and a maximum luminance level that exceeds 4.7×10^(4) Cdm^(-2).Additionally,a significantly lower energy consumption for microwave-mediated synthesis compared with hot injection is demonstrated.These findings suggest that this synthetic procedure emerges as an outstanding and promising method towards a scalable and sustainable fabrication of high-quality perovskite light-emitting diodes.
基金Fundamental Research Program of Shanxi Province(20210302124637,202203021211102,J20230701)。
文摘Blue-light emitting materials with high purity and good luminous efficiency have attracted considerable attention from both academic and commercial researchers for their great potential use in OLEDs.In order to improve thermal stability and lower the possibility to generate fluorescence quenching of organic blue-light emitting materials formed by carbazole,a linear organic molecule containing carbazole and triarylamine group,named N4,N4’-bis(9-ethyl-9H-carbazol-3-yl)-N4,N4’-diphenyl-[1,1’-biphenyl]-4,4’-diamine(DPECB),was synthesized via the Buchwald-Hartwig reaction.The structure of DPECB was characterized by nuclear magnetic resonance(NMR)and infrared spectroscopy.The UV-Vis absorption spectrum shows that DPECB exhibits two strong absorption peaks in the near ultraviolet region(around 305 and 355 nm).The fluorescence emission spectrum indicates that DPECB displays blue light emission both in solution(428-445 nm)and solid-state(466 nm).Additionally,DPECB shows clearly aggregation-induced emission enhancement(AIEE)effect in the mixed solvent of DMF/H2O.As the thermogravimetric analysis shows,DPECB demonstrates excellent thermostability with a 5%decomposition temperature of 457℃owing to the introduction of triarylamine group.The electrochemical property of DPECB was studied through cyclic voltammetry,and its HOMO and LUMO energy levels are-5.27 and-2.25 eV,respectively.These results indicate that DPECB is a promising blue-light emitting material with potential commercial applications.
文摘This study analyzes the influence of green bonds on carbon neutrality.It examines the daily data of sectoral CO_(2) emissions of the top five CO_(2)-emitting nations from January 2,2019 to December 30,2022 using wavelet transform coherence,quantile-onquantile regression,Granger causality in quantiles,and quantile regression approaches.The results revealed that(i)green bonds are strongly related to sectoral CO_(2) emissions;(ii)green bonds reduce transport sector CO_(2) emissions in China,the US,and Japan while causing an upsurge in India and Russia;(iii)green bonds reduce industrial sector CO_(2) emissions only in the US;(iv)green bonds have a declining influence in energy sector CO_(2) emissions at lower quantiles in India,China,and the US,whereas the impact increases at higher quantiles;and(v)green bonds decrease residential sector CO_(2) emissions in the US,Russia,and Japan.The study revealed that green bonds help reduce CO_(2) emissions in the residential sector in various quantiles.Therefore,the US,Russia,and Japan should raise household awareness of green energy utilization by promoting them with green bonds.In addition,green bonds can effectively reduce transportation sector CO_(2) emissions in China and the US.Therefore,the policymakers of the two global powers should contribute to global CO_(2) reduction by promoting green transportation and clean energy transition in the transportation sector through green bonds.Thus,green bonds can play an effective role in the fight against global warming.
基金the National Natural Science Foundation of China (Grant Nos.61204087, 61306099)the Guangdong Natural Science Foundation (Grant No. S2012040007003)+2 种基金China Postdoctoral Science Foundation (2013M531841)the Fundamental Research Funds for the Central Universities (2014ZM0003, 2014ZM0034, 2014ZM0037, 2014ZZ0028)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20120172120008)
文摘A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.
基金Project supported by the National Key R&D Program of China(2019YFA0709101)National Natural Science Foundation of China(52072364,51902305)the Fund for Creative Research Groups(21221061)。
文摘A series of novel red-emitting BaLiZn_(3)(BO_(3))_(3):Eu^(3+)phosphors were synthesized through the high temperature solid state reaction method.The phase composition,crystal structure,morphology and photo luminescence property of the BaLiZn_(3)(BO_(3))_(3):Eu^(3+)samples were systematically investigated.The phosphor can be efficiently excited by the near ultraviolet light(NUV)of 396 nm and blue light of 466 nm,and give out red light emission at 618 nm corresponding to the electric dipole transition(^(5)D_(0)→^(7)E_(2)).The optimal doping concentration of Eu^(3+)ions in BaLiZn_(3)(BO_(3))_(3)is determined to be about 3 mol%,and the concentration-quenching phenomenon arise from the electric dipole-dipole interaction.The temperature dependent luminescence behavior of BaLiZn_(3)(BO_(3))_(3):0.03 Eu^(3+)phosphor exhibits its good thermal stability,and the activation energy for thermal quenching characteristics is calculated to be 0.1844 eV.The decay lifetime of the BaLiZn_(3)(BO_(3))_(3):0.03 Eu^(3+)is measured to be 1.88 ms.These results suggest that the BaLiZn_(3)(BO_(3))_(3):Eu^(3+)phosphors have the potential application as a red component in white light emitting diodes(WLEDs)with NUV or blue chips.
基金supported by the National Natural Science Foundation of China(Grant Nos.61136003 and 61275041)the Project of Science and TechnologyCommission of Shanghai Municipality,China(Grant No.14XD1401800)
文摘We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.
基金supported by the Program for New Century Excellent Talents in University of Ministry of Education of China(Grant No.NCET-13-0927)the International Science&Technology Cooperation Program of China(Grant No.2012DFR50460)+1 种基金the National Natural Science Foundation of China(Grant Nos.21101111 and 61274056)the Shanxi Provincial Key Innovative Research Team in Science and Technology,China(Grant No.2012041011)
文摘Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61675041 and 61605253)the Foundation for Innovation Research Groups of the National Natural Science Foundation of China(Grant No.61421002)the Science&Technology Department Program of Sichuan Province,China(Grant No.2016HH0027)
文摘Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.
文摘Lateral oxidation in vertical cavity surface emitting lasers （VCSELs） is described,and its characteristics are investigated.A linear growth law is found for stripe mesas. However, oxide growth （above 435℃ ） follows a nonlinear law for the two geometry mesa structures which we employ in VCSEL. Theoretical analysis indicates that mesa structure geometry influences oxide growth rate at higher temperatures.
基金Project supported by the Science Fund of the Ministry of Science and Technology,China (Grant No. 2009CB930600)the National Natural Science Foundation of China (Grants Nos. 60907047,61274065,and 60977024)+4 种基金the Key Project of the Chinese Ministryof Education (Grants Nos. 104246 and 707032)the Research Fund for the Doctoral Program of Higher Education Institutions,China (Grant Nos. 20093223120003 and 20093223110003)the Natural Science Foundation of Jiangsu Province and the Higher Education Institutions of Jiangsu Province,China (Grants Nos. BK2009423,SJ209003,10KJB510013,and 11KJD510003)the Fok Ying-Tong Education Foundation,China (Grant No. 111051)the "Qing Lan" Program of Jiangsu Province and the "Pandeng"Project of Nanjing University of Posts and Telecommunications,China (Grant Nos. NY210015,NY211069,and NY210040)
文摘In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-optimized ZnS out-coupling layer.With a 24-nm out-coupling layer,the reflectivity of the cathode is reduced to 8% at 492 nm and the mean reflectivity is 24% in the visible area.By introducing an efficient electron blocking layer tris（1phenylpyrazolato,N,C2 ＇）iridium（III）（Ir（ppz） 3） to confine the exciton recombination area,the current efficiency and the colour stability of the device are effectively improved.A white emission with the Ir（ppz） 3 layer exhibits a maximum current efficiency of 9.8 cd/A at 8 V,and the Commission Internationale de L＇Eclairage（CIE） chromaticity coordinates are almost constant during a large voltage change of 6 V-11 V.There is almost no viewing angular dependence in the spectrum when the viewing angle is no more than 45,with a CIE x,y coordinate variation of only（±0.0025,±0.0008）.Even at a large viewing angle（75）,the CIE x,y coordinate change is as small as（±0.0087,±0.0013）.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60906022 and 60876046)the Tianjin Natural Science Foundation,China (Grant No. 10JCYBJC01100)
文摘We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-benzidine（NPB） and electron transporting layer（ETL） 4,7-diphnenyl-1,10-phenanthroline（BPhen）,into which a new blue material,DNCA（a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine）,is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency（η max） of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L＇Eclairage（CIE） coordinates of this device change slightly from（0.13,0.27） to（0.13,0.23） as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.
文摘Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at Ionger wavelengths)of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also beimproved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, theexcimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue ligh both in solution and in film. The optical propertiesare dependent on the substituion on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL andgood thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure couldbe tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complexat the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emissionwith a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with differentsubstitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physicalproperties of the polymers.
