Sustainable and clean hydrogen development has been considered a mainstream trend in contemporary energy research.Heterogenous photo(electro)catalysis is a promising approach to producing hydrogen in an environmentall...Sustainable and clean hydrogen development has been considered a mainstream trend in contemporary energy research.Heterogenous photo(electro)catalysis is a promising approach to producing hydrogen in an environmentally friendly manner.Perovskites have emerged as an inexpensive,earth-abundant,and easily fabricated semiconductor material for photo(electro)catalysis.However,some of their shortcomings have limited the wide range of applications.In this mini-review,we present the fundamentals and applications of various perovskites for photo(electro)catalytic water splitting.In addition,we summarize advanced strategies for photo(electro)catalytic water splitting based on perovskites,focusing on the following approaches:intrinsic modulation of perovskites,functionalization of perovskites,and design of perovskite tandem systems.In summary,we point out the challenges and potential applications for perovskite solar water splitting and systematically describe various strategies to improve the photo(electro)catalysis performance of perovskites,illustrating the potential of using perovskites as key materials for solar water splitting.展开更多
In the grand tapestry of the global energy transition,the quest for scalable hydrogen economies emerges as a pivotal thread,weaving together the dual imperatives of decarbonization and industrial pragmatism.Yet,in its...In the grand tapestry of the global energy transition,the quest for scalable hydrogen economies emerges as a pivotal thread,weaving together the dual imperatives of decarbonization and industrial pragmatism.Yet,in its present form,hydrogen production remains deeply entwined with carbon emissions.展开更多
In this study,the design and development of a sensor made of low-cost parts to monitor inclination and acceleration are presented.Αmicro electro-mechanical systems,micro electro mechanical systems,sensor was housed i...In this study,the design and development of a sensor made of low-cost parts to monitor inclination and acceleration are presented.Αmicro electro-mechanical systems,micro electro mechanical systems,sensor was housed in a robust enclosure and interfaced with a Raspberry Pi microcomputer with Internet connectivity into a proposed tilt and acceleration monitoring node.Online capabilities accessible by mobile phone such as real-time graph,early warning notification,and database logging were implemented using Python programming.The sensor response was calibrated for inherent bias and errors,and then tested thoroughly in the laboratory under static and dynamic loading conditions beside high-quality transducers.Satisfactory accuracy was achieved in real time using the Complementary Filter method,and it was further improved in LabVIEW using Kalman Filters with parameter tuning.A sensor interface with LabVIEW and a 600 MHz CPU microcontroller allowed real-time implementation of highspeed embedded filters,further optimizing sensor results.Kalman and embedded filtering results show agreement for the sensor,followed closely by the lowcomplexity complementary filter applied in real time.The sensor's dynamic response was also verified by shaking table tests,simulating past recorded seismic excitations or artificial vibrations,indicating negligible effect of external acceleration on measured tilt;sensor measurements were benchmarked using highquality tilt and acceleration measuring transducers.A preliminary field evaluation shows robustness of the sensor to harsh weather conditions.展开更多
Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabri...Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining （WECM） is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy （TC1）. The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.展开更多
The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(EC...The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(ECMR) with the Ti membrane electrode and the electrocatalytic reactor(ECR) with the traditional Ti plate electrode.For the electro-oxidation of TFP, the conversion with membrane electrode(70.1%) in the ECMR was 3.3 and 1.7 times higher than that of the membrane electrode without permeate flow(40.8%) in the ECMR and the plate electrode(21.5%) in the ECR, respectively.Obviously, the pore structure of membrane and convection-enhanced mass transfer in the ECMR dramatically improved the catalytic activity towards the electro-oxidation of TFP.The specific surface area of porous electrode was 2.22 m^2·g^(-1).The surface area of plate electrode was 2.26 cm^2(1.13 cm^2× 2).In addition, the electrochemical results showed that the mass diffusion coefficient of the MnO_x/Ti membrane electrode(1.80 × 10^(-6) cm^2·s^(-1)) could be increased to 6.87 × 10^(-6) cm^2·s^(-1) at the certain flow rate with pump, confirming the lower resistance of mass transfer due to the convection-enhanced mass transfer during the operation of the ECMR.Hence, the porous structure and convection-enhanced mass transfer would improve the electrochemical property of the membrane electrode and the catalytic performance of the ECMR,which could give guideline for the design and application of the porous electrode and electrochemical reactor.展开更多
CO_(2) conversion into value-added products by electro-, photoand plasma catalysis under mild operating conditions(ambient temperature and pressure) is an emerging area to achieve carbon circularity by producing chemi...CO_(2) conversion into value-added products by electro-, photoand plasma catalysis under mild operating conditions(ambient temperature and pressure) is an emerging area to achieve carbon circularity by producing chemicals and fuels using directly renewable energy. Among all CO_(2) conversion approaches, the electrocatalytic reduction of CO_(2) is the most mature technology, capable of achieving high productivity(i.e. high current densities) at large scale, especially for producing carbon monoxide(CO), but with many examples showing selectivity to C_(2) carbon products.展开更多
In this paper, the main goal is to prepare silk fibroin nano-fiber, which is used for regenerated tissue applications. Silk scaffold nano-fibers made by electro-spinning technology can be used in regenerated tissue ap...In this paper, the main goal is to prepare silk fibroin nano-fiber, which is used for regenerated tissue applications. Silk scaffold nano-fibers made by electro-spinning technology can be used in regenerated tissue applications. The purpose of the research is to prepare a silk-fibroin nano-fiber solution for potential applications in tissue engineering. Using a degumming process, pure silk fibroin protein is extracted from silk cocoons. The protein solution for fibroin is purified, and the protein content is determined. The precise chemical composition, exact temperature, time, voltage, distance, ratio, and humidity all have a huge impact on degumming, solubility, and electro-spinning nano-fibers. The SEM investigates the morphology of silk fibroin nano-fibres at different magnifications. It also reveals the surface condition, fiber orientation, and fiber thickness of the silk fibroin nano-fiber. The results show that regenerated silk fibroin and nano-fiber can be used in silk fibroin scaffolds for various tissue engineering applications.展开更多
Modulated electro-hyperthermia (mEHT) targets tissue’s natural electric and thermal heterogeneities to heat the cancer cells selectively. The applied 13.56 MHz radiofrequency (RF) is a carrier of the low-frequency mo...Modulated electro-hyperthermia (mEHT) targets tissue’s natural electric and thermal heterogeneities to heat the cancer cells selectively. The applied 13.56 MHz radiofrequency (RF) is a carrier of the low-frequency modulation. The high-frequency part was chosen to select the malignant lesion using the specialties of the tumor: the higher conductivity and dielectric constant of the tumor than its host. The electric field selects the tumor, and the low-frequency amplitude modulation polarizes and excites the transmembrane proteins of the malignant cells. The dominant absorption of the energy by the microscopic clusters of the membrane rafts acts like nanoparticle heating. Exciting the membrane produces various apoptotic signals. The processes were modeled using silico and phantom experiments, which proved the concept. The preclinical verification was made in vitro and in vivo, and in the end, clinical proofs validated the method. Our objective is to follow all the development steps from the laboratory to the clinics in a trilogy of articles. This present is the first part, which deals with in silico, phantom, and in vitro research.展开更多
Magneto-electro-elastic (MEE) materials, a new type of composite intelligent materials, exhibit excellent multifield coupling effects. Due to the heterogeneity of the materials, it is challenging to use the traditiona...Magneto-electro-elastic (MEE) materials, a new type of composite intelligent materials, exhibit excellent multifield coupling effects. Due to the heterogeneity of the materials, it is challenging to use the traditional finite element method (FEM) for mechanical analysis. Additionally, the MEE materials are often in a complex service environment, especially under the influence of the thermal field with thermoelectric and thermomagnetic effects, which affect its mechanical properties. Therefore, this paper proposes the efficient multiscale computational method for the multifield coupling problem of heterogeneous MEE structures under the thermal environment. The method constructs a multi-physics field with numerical base functions (the displacement, electric potential, and magnetic potential multiscale base functions). It equates a single cell of heterogeneous MEE materials to a macroscopic unit and supplements the macroscopic model with a microscopic model. This allows the problem to be solved directly on a macroscopic scale. Finally, the numerical simulation results demonstrate that compared with the traditional FEM, the multiscale finite element method (MsFEM) can achieve the purpose of ensuring accuracy and reducing the degree of freedom, and significantly improving the calculation efficiency.展开更多
A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characteriz...A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.展开更多
Efficient,stable,and noble‐metal‐free electrocatalysts for both the oxygen evolution reaction and the hydrogen evolution reaction are highly imperative for the realization of low‐cost commercial water‐splitting el...Efficient,stable,and noble‐metal‐free electrocatalysts for both the oxygen evolution reaction and the hydrogen evolution reaction are highly imperative for the realization of low‐cost commercial water‐splitting electrolyzers.Herein,a cost‐effective and ecofriendly strategy is reported to fabricate coral‐like FeNi(OH)x/Ni as a bifunctional electrocatalyst for overall water splitting in alkaline media.With the assistance of mild corrosion of Ni by Fe(NO3)3,in situ generated FeNi(OH)x nanosheets are intimately attached on metallic coral‐like Ni.Integration of these nanosheets with the electrodeposited coral‐like Ni skeleton and the supermacroporous Ni foam substrate forms a binder‐free hierarchical electrode,which is beneficial for exposing catalytic active sites,accelerating mass transport,and facilitating the release of gaseous species.In 1.0 mol L^-1 KOH solution,a symmetric electrolyzer constructed with FeNi(OH)x/Ni as both the anode and the cathode exhibits an excellent activity with an applied potential difference of 1.52 V at 10 mA cm^-2,which is superior to that of an asymmetric electrolyzer constructed with the state‐of‐the‐art RuO2‐PtC couple(applied potential difference of 1.55 V at 10 mA cm^-2).This work contributes a facile and reliable strategy for manufacturing affordable,practical,and promising water‐splitting devices.展开更多
A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microsc...A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）.The Pd micro-nanoparticles were prepared on a COOH-CNTs/PI membrane as a comparative sample.The XRD and SEM investigations for Pd electrodeposition demonstrate that the particle size of Gr/PI composite membrane is smaller than that of COOH-CNTs/PI membrane,while the uniform and dense distribution of Pd micro-nanoparticles on the Gr/PI composite membrane is greater than that on the COOH-CNTs/PI membrane.The electrocatalytic properties of Pd/Gr/PI and Pd/COOH-CNTs/PI catalysts for the oxidation of formic acid were investigated by cyclic voltammetry（CV） and chronoamperometry（CA）.It is found that the electrocatalytic activity and stability of Pd/Gr/PI are superior to those of Pd/COOH-CNTs/PI catalyst.This is because smaller metal particles and higher dense distribution desirably provide abundant catalytic sites and mean higher catalytic activity.Therefore,the Pd/Gr/PI catalyst has better catalytic performance for formic acid oxidation than the Pd/COOH-CNTs/PI catalyst.展开更多
This paper reviews the current applied research of the pulsed electromagnetic field in the metallurgical area of solidification,plastic deformation and electro-deposition.The possibilities of developing the field appl...This paper reviews the current applied research of the pulsed electromagnetic field in the metallurgical area of solidification,plastic deformation and electro-deposition.The possibilities of developing the field applications are analyzed when viewing from the processes of the metallurgy industry.It covers refining grain in the solidification process under the pulsed electromagnetic field,rolling of the thin plate deformation with the help of the electro-plastic effects by the pulsed power supplies and pulsed plating of pure metals or alloys onto the surface of the running steel strip.展开更多
This paper investigates vibration control of beam through electro-magnetic constrained layer damping （EMCLD） which consists of electromagnet layer, permanent magnet layer and viscoelastic damping layer. When the coi...This paper investigates vibration control of beam through electro-magnetic constrained layer damping （EMCLD） which consists of electromagnet layer, permanent magnet layer and viscoelastic damping layer. When the coil of the electromagnet is electrified with proper control strategy, the electromagnet can exert magnetic force opposite to the direction of structural deformation so that the structural vibration is attenuated. A mathematical model is developed based on the equivalent current method to calculate the electromagnetic control force produced by EMCLD. The governing equations of the system are obtained using Hamilton＇s Principle and then reduced with the assumed-mode method. A simulation on vibration control of a cantilever beam is conducted under the velocity proportional feedback to demonstrate the energy dissipation capability of EMCLD, and the beam system with the same parameter is experimented. The results of experiment and simulation are compared and the results show that the EMCLD is an effective means for suppressing modal vibration. The results also indicate that the beam system has better control performance for larger control current. The EMCLD method presented in this paper provides an applicable and efficient tool for the vibration control of structures.展开更多
Objective To observe the therapeutic effect of electro acupuncture at QIǖXǖ（丘墟GB40） for treating migraine and provide clinical study for Acupoints Dictionary of People＇s Republic of China. Methods Multi-center ...Objective To observe the therapeutic effect of electro acupuncture at QIǖXǖ（丘墟GB40） for treating migraine and provide clinical study for Acupoints Dictionary of People＇s Republic of China. Methods Multi-center （3 First-Class hospitals） study was adopted, and the involved 3 hospitals did clinical observation according to the requirements of the project. The methods are as follows. All cases were randomized into treatment group and control group according to their sequence. QIǖXǖ（丘墟GB40） was selected in treatment group, while Tiānshū （天枢 ST25） was selected in control group. Both groups were performed electro acupuncture, and syndromes indexes of migraine and 5-HT were observed before and after treatment. All data were analyzed by statistic software SPSS11.5. Results There was significant difference of VAS margin between two groups in each center and the combined center （u= -3. 362, P=0. 001 ）. There was significant difference of therapeutic effect of 4-week treatment between two groups in each clinical center and the combined center. The therapeutic effect of 3-month treatment between two groups in No. 1 and No. 3 hospitals, showed significant difference, the treatment group was better; while that of No. 2 hospital had no obvious difference. The therapeutic effect of 6-month treatment between two groups in each center and the combined center had significant difference, the treatment group was better. Conclusion The therapy of electro acupuncture at QIǖXǖ（丘墟GB40） is effective for migraine.展开更多
This study was performed to investigate the variables that influence chlorobenzene (CB) degradation in aqueous solution by electro-heterogeneous catalysis.The effects of current density,pH,and electrolyte concentratio...This study was performed to investigate the variables that influence chlorobenzene (CB) degradation in aqueous solution by electro-heterogeneous catalysis.The effects of current density,pH,and electrolyte concentration on CB degradation were determined.The degradation effciency of CB was almost 100% with an initial CB concentration of 50 mg/L,current density 15 mA/cm2,initial pH 10,electrolyte concentration 0.1 mol/L,and temperature 25°C after 90 min of reaction.Under the same conditions,the degradation eff...展开更多
Due to the serious greenhouse gas effects caused by the increasing concentration of atmospheric CO_2,carbon capture and storage(CCS) has been an important area of research and many technologies are developed within th...Due to the serious greenhouse gas effects caused by the increasing concentration of atmospheric CO_2,carbon capture and storage(CCS) has been an important area of research and many technologies are developed within this field. Molten salt CO_2 capture and electrochemical transformation(MSCC-ET) process is a desirable method due to a high CO_2 solubility, a wide potential window of molten salts and easily-controlled electrode reactions. Generally, electro-splitting CO_2 in molten salts begins with CO_2 absorption reactions to form CO_3^(2-), which is then followed by the carbon deposition at the cathode and O_2 evolution at the anode. As a result, CO_2 is electro-converted to O_2 and carbon with different morphologies, compositions, microstructures and functional properties. This report introduces the MSCC-ET process, summarizes the reactions occurring in the molten salts and at the electrode surfaces, as well as the morphological variations of the cathodic products. The inert anode materials, cost estimation and scale-up evaluation of the process are then discussed. It is presumed that with a comprehensive understanding of the electrode reactions during electrolysis and the functional properties of carbon materials obtained during CO_2 electro-splitting can provide a foundation for further developing this environmentally friendly process.展开更多
Due to their environmentally friendly nature and high energy density,direct ethanol fuel cells have attracted extensive research attention in recent decades.However,the actual Faraday efficiency of the ethanol oxidati...Due to their environmentally friendly nature and high energy density,direct ethanol fuel cells have attracted extensive research attention in recent decades.However,the actual Faraday efficiency of the ethanol oxidation reaction(EOR)is much lower than its theoretical value and the reaction kinetics of the EOR is sluggish due to insufficient active sites on the electrocatalyst surface.Pt/C is recognized as one of the most promising electrocatalysts for the EOR.Thus,the microscopic interfacial reaction mechanisms of the EOR on Pt/C were systematically studied in this work.In metal hydroxide solutions,hydrated alkali cations were found to bind with OH_(ad)through noncovalent interactions to form clusters and occupy the active sites on the Pt/C electrocatalyst surface,thus resulting in low Faraday efficiency and sluggish kinetics of the EOR.To reduce the negative effect of the noncovalent interactions on the EOR,a shield was made on the electrocatalyst surface using 4-trifluoromethylphenyl,resulting in twice the EOR catalytic reactivity of Pt/C.展开更多
基金supported by the National Natural Science Foundation of China (No.62204067)Young Talent Support Project of Guangzhou Association for Science and Technology (No.QT-2023-051)+2 种基金industry support from Shenzhen Jinjia jituan Co.,Ltd with funding No.R00043the financial support from the Science and Technology Development Fund,Macao SAR (File no.FDCT-0125/2022/A and FDCT-0006/2023/RIB1)the National Natural Science Foundation of China (No.22305009)
文摘Sustainable and clean hydrogen development has been considered a mainstream trend in contemporary energy research.Heterogenous photo(electro)catalysis is a promising approach to producing hydrogen in an environmentally friendly manner.Perovskites have emerged as an inexpensive,earth-abundant,and easily fabricated semiconductor material for photo(electro)catalysis.However,some of their shortcomings have limited the wide range of applications.In this mini-review,we present the fundamentals and applications of various perovskites for photo(electro)catalytic water splitting.In addition,we summarize advanced strategies for photo(electro)catalytic water splitting based on perovskites,focusing on the following approaches:intrinsic modulation of perovskites,functionalization of perovskites,and design of perovskite tandem systems.In summary,we point out the challenges and potential applications for perovskite solar water splitting and systematically describe various strategies to improve the photo(electro)catalysis performance of perovskites,illustrating the potential of using perovskites as key materials for solar water splitting.
基金financially supported by the National Natural Science Foundation of China(22225902)the National Key Research&Development Program of China(2022YFE0115900)。
文摘In the grand tapestry of the global energy transition,the quest for scalable hydrogen economies emerges as a pivotal thread,weaving together the dual imperatives of decarbonization and industrial pragmatism.Yet,in its present form,hydrogen production remains deeply entwined with carbon emissions.
基金Research Committee,National Technical University of Athens。
文摘In this study,the design and development of a sensor made of low-cost parts to monitor inclination and acceleration are presented.Αmicro electro-mechanical systems,micro electro mechanical systems,sensor was housed in a robust enclosure and interfaced with a Raspberry Pi microcomputer with Internet connectivity into a proposed tilt and acceleration monitoring node.Online capabilities accessible by mobile phone such as real-time graph,early warning notification,and database logging were implemented using Python programming.The sensor response was calibrated for inherent bias and errors,and then tested thoroughly in the laboratory under static and dynamic loading conditions beside high-quality transducers.Satisfactory accuracy was achieved in real time using the Complementary Filter method,and it was further improved in LabVIEW using Kalman Filters with parameter tuning.A sensor interface with LabVIEW and a 600 MHz CPU microcontroller allowed real-time implementation of highspeed embedded filters,further optimizing sensor results.Kalman and embedded filtering results show agreement for the sensor,followed closely by the lowcomplexity complementary filter applied in real time.The sensor's dynamic response was also verified by shaking table tests,simulating past recorded seismic excitations or artificial vibrations,indicating negligible effect of external acceleration on measured tilt;sensor measurements were benchmarked using highquality tilt and acceleration measuring transducers.A preliminary field evaluation shows robustness of the sensor to harsh weather conditions.
基金financial support from the National Natural Science Foundation of China (No. 51005120)Jiangsu Natural Science Foundation (Nos. BK2010508 and BE2010193)
文摘Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining （WECM） is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy （TC1）. The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.
基金Supported by the National Natural Science Foundation of China(21676200,21576208)the Program for Innovative Research Team in University of Ministry of Education of China(IRT-17R80)+2 种基金the Science and Technology Plans of Tianjin(17JCYBJC19800)111 Project(B12015)College Students' Innovation and Entrepreneurship Project(201510058083)
文摘The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(ECMR) with the Ti membrane electrode and the electrocatalytic reactor(ECR) with the traditional Ti plate electrode.For the electro-oxidation of TFP, the conversion with membrane electrode(70.1%) in the ECMR was 3.3 and 1.7 times higher than that of the membrane electrode without permeate flow(40.8%) in the ECMR and the plate electrode(21.5%) in the ECR, respectively.Obviously, the pore structure of membrane and convection-enhanced mass transfer in the ECMR dramatically improved the catalytic activity towards the electro-oxidation of TFP.The specific surface area of porous electrode was 2.22 m^2·g^(-1).The surface area of plate electrode was 2.26 cm^2(1.13 cm^2× 2).In addition, the electrochemical results showed that the mass diffusion coefficient of the MnO_x/Ti membrane electrode(1.80 × 10^(-6) cm^2·s^(-1)) could be increased to 6.87 × 10^(-6) cm^2·s^(-1) at the certain flow rate with pump, confirming the lower resistance of mass transfer due to the convection-enhanced mass transfer during the operation of the ECMR.Hence, the porous structure and convection-enhanced mass transfer would improve the electrochemical property of the membrane electrode and the catalytic performance of the ECMR,which could give guideline for the design and application of the porous electrode and electrochemical reactor.
文摘CO_(2) conversion into value-added products by electro-, photoand plasma catalysis under mild operating conditions(ambient temperature and pressure) is an emerging area to achieve carbon circularity by producing chemicals and fuels using directly renewable energy. Among all CO_(2) conversion approaches, the electrocatalytic reduction of CO_(2) is the most mature technology, capable of achieving high productivity(i.e. high current densities) at large scale, especially for producing carbon monoxide(CO), but with many examples showing selectivity to C_(2) carbon products.
文摘In this paper, the main goal is to prepare silk fibroin nano-fiber, which is used for regenerated tissue applications. Silk scaffold nano-fibers made by electro-spinning technology can be used in regenerated tissue applications. The purpose of the research is to prepare a silk-fibroin nano-fiber solution for potential applications in tissue engineering. Using a degumming process, pure silk fibroin protein is extracted from silk cocoons. The protein solution for fibroin is purified, and the protein content is determined. The precise chemical composition, exact temperature, time, voltage, distance, ratio, and humidity all have a huge impact on degumming, solubility, and electro-spinning nano-fibers. The SEM investigates the morphology of silk fibroin nano-fibres at different magnifications. It also reveals the surface condition, fiber orientation, and fiber thickness of the silk fibroin nano-fiber. The results show that regenerated silk fibroin and nano-fiber can be used in silk fibroin scaffolds for various tissue engineering applications.
文摘Modulated electro-hyperthermia (mEHT) targets tissue’s natural electric and thermal heterogeneities to heat the cancer cells selectively. The applied 13.56 MHz radiofrequency (RF) is a carrier of the low-frequency modulation. The high-frequency part was chosen to select the malignant lesion using the specialties of the tumor: the higher conductivity and dielectric constant of the tumor than its host. The electric field selects the tumor, and the low-frequency amplitude modulation polarizes and excites the transmembrane proteins of the malignant cells. The dominant absorption of the energy by the microscopic clusters of the membrane rafts acts like nanoparticle heating. Exciting the membrane produces various apoptotic signals. The processes were modeled using silico and phantom experiments, which proved the concept. The preclinical verification was made in vitro and in vivo, and in the end, clinical proofs validated the method. Our objective is to follow all the development steps from the laboratory to the clinics in a trilogy of articles. This present is the first part, which deals with in silico, phantom, and in vitro research.
文摘Magneto-electro-elastic (MEE) materials, a new type of composite intelligent materials, exhibit excellent multifield coupling effects. Due to the heterogeneity of the materials, it is challenging to use the traditional finite element method (FEM) for mechanical analysis. Additionally, the MEE materials are often in a complex service environment, especially under the influence of the thermal field with thermoelectric and thermomagnetic effects, which affect its mechanical properties. Therefore, this paper proposes the efficient multiscale computational method for the multifield coupling problem of heterogeneous MEE structures under the thermal environment. The method constructs a multi-physics field with numerical base functions (the displacement, electric potential, and magnetic potential multiscale base functions). It equates a single cell of heterogeneous MEE materials to a macroscopic unit and supplements the macroscopic model with a microscopic model. This allows the problem to be solved directly on a macroscopic scale. Finally, the numerical simulation results demonstrate that compared with the traditional FEM, the multiscale finite element method (MsFEM) can achieve the purpose of ensuring accuracy and reducing the degree of freedom, and significantly improving the calculation efficiency.
基金supported by the National Defense Science and Technology Innovation Zone Project(No.18-H863-05-ZT-001-018-09)
文摘A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.
文摘Efficient,stable,and noble‐metal‐free electrocatalysts for both the oxygen evolution reaction and the hydrogen evolution reaction are highly imperative for the realization of low‐cost commercial water‐splitting electrolyzers.Herein,a cost‐effective and ecofriendly strategy is reported to fabricate coral‐like FeNi(OH)x/Ni as a bifunctional electrocatalyst for overall water splitting in alkaline media.With the assistance of mild corrosion of Ni by Fe(NO3)3,in situ generated FeNi(OH)x nanosheets are intimately attached on metallic coral‐like Ni.Integration of these nanosheets with the electrodeposited coral‐like Ni skeleton and the supermacroporous Ni foam substrate forms a binder‐free hierarchical electrode,which is beneficial for exposing catalytic active sites,accelerating mass transport,and facilitating the release of gaseous species.In 1.0 mol L^-1 KOH solution,a symmetric electrolyzer constructed with FeNi(OH)x/Ni as both the anode and the cathode exhibits an excellent activity with an applied potential difference of 1.52 V at 10 mA cm^-2,which is superior to that of an asymmetric electrolyzer constructed with the state‐of‐the‐art RuO2‐PtC couple(applied potential difference of 1.55 V at 10 mA cm^-2).This work contributes a facile and reliable strategy for manufacturing affordable,practical,and promising water‐splitting devices.
基金Project(51372106)supported by the National Natural Science Foundation of China
文摘A novel Pd electrocatalyst with flowerlike micro-nanostructures was synthesized by electrochemical deposition on a flexible graphene/polyimide（Gr/PI） composite membrane and characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）.The Pd micro-nanoparticles were prepared on a COOH-CNTs/PI membrane as a comparative sample.The XRD and SEM investigations for Pd electrodeposition demonstrate that the particle size of Gr/PI composite membrane is smaller than that of COOH-CNTs/PI membrane,while the uniform and dense distribution of Pd micro-nanoparticles on the Gr/PI composite membrane is greater than that on the COOH-CNTs/PI membrane.The electrocatalytic properties of Pd/Gr/PI and Pd/COOH-CNTs/PI catalysts for the oxidation of formic acid were investigated by cyclic voltammetry（CV） and chronoamperometry（CA）.It is found that the electrocatalytic activity and stability of Pd/Gr/PI are superior to those of Pd/COOH-CNTs/PI catalyst.This is because smaller metal particles and higher dense distribution desirably provide abundant catalytic sites and mean higher catalytic activity.Therefore,the Pd/Gr/PI catalyst has better catalytic performance for formic acid oxidation than the Pd/COOH-CNTs/PI catalyst.
文摘This paper reviews the current applied research of the pulsed electromagnetic field in the metallurgical area of solidification,plastic deformation and electro-deposition.The possibilities of developing the field applications are analyzed when viewing from the processes of the metallurgy industry.It covers refining grain in the solidification process under the pulsed electromagnetic field,rolling of the thin plate deformation with the help of the electro-plastic effects by the pulsed power supplies and pulsed plating of pure metals or alloys onto the surface of the running steel strip.
基金National Natural Science Foundation of China (50275114)
文摘This paper investigates vibration control of beam through electro-magnetic constrained layer damping （EMCLD） which consists of electromagnet layer, permanent magnet layer and viscoelastic damping layer. When the coil of the electromagnet is electrified with proper control strategy, the electromagnet can exert magnetic force opposite to the direction of structural deformation so that the structural vibration is attenuated. A mathematical model is developed based on the equivalent current method to calculate the electromagnetic control force produced by EMCLD. The governing equations of the system are obtained using Hamilton＇s Principle and then reduced with the assumed-mode method. A simulation on vibration control of a cantilever beam is conducted under the velocity proportional feedback to demonstrate the energy dissipation capability of EMCLD, and the beam system with the same parameter is experimented. The results of experiment and simulation are compared and the results show that the EMCLD is an effective means for suppressing modal vibration. The results also indicate that the beam system has better control performance for larger control current. The EMCLD method presented in this paper provides an applicable and efficient tool for the vibration control of structures.
文摘Objective To observe the therapeutic effect of electro acupuncture at QIǖXǖ（丘墟GB40） for treating migraine and provide clinical study for Acupoints Dictionary of People＇s Republic of China. Methods Multi-center （3 First-Class hospitals） study was adopted, and the involved 3 hospitals did clinical observation according to the requirements of the project. The methods are as follows. All cases were randomized into treatment group and control group according to their sequence. QIǖXǖ（丘墟GB40） was selected in treatment group, while Tiānshū （天枢 ST25） was selected in control group. Both groups were performed electro acupuncture, and syndromes indexes of migraine and 5-HT were observed before and after treatment. All data were analyzed by statistic software SPSS11.5. Results There was significant difference of VAS margin between two groups in each center and the combined center （u= -3. 362, P=0. 001 ）. There was significant difference of therapeutic effect of 4-week treatment between two groups in each clinical center and the combined center. The therapeutic effect of 3-month treatment between two groups in No. 1 and No. 3 hospitals, showed significant difference, the treatment group was better; while that of No. 2 hospital had no obvious difference. The therapeutic effect of 6-month treatment between two groups in each center and the combined center had significant difference, the treatment group was better. Conclusion The therapy of electro acupuncture at QIǖXǖ（丘墟GB40） is effective for migraine.
基金the Science and Technology Department of Zhejiang Province (No.2006C13120).
文摘This study was performed to investigate the variables that influence chlorobenzene (CB) degradation in aqueous solution by electro-heterogeneous catalysis.The effects of current density,pH,and electrolyte concentration on CB degradation were determined.The degradation effciency of CB was almost 100% with an initial CB concentration of 50 mg/L,current density 15 mA/cm2,initial pH 10,electrolyte concentration 0.1 mol/L,and temperature 25°C after 90 min of reaction.Under the same conditions,the degradation eff...
基金funding support from the National Natural Science Foundation of China (51722404 and 51674177)
文摘Due to the serious greenhouse gas effects caused by the increasing concentration of atmospheric CO_2,carbon capture and storage(CCS) has been an important area of research and many technologies are developed within this field. Molten salt CO_2 capture and electrochemical transformation(MSCC-ET) process is a desirable method due to a high CO_2 solubility, a wide potential window of molten salts and easily-controlled electrode reactions. Generally, electro-splitting CO_2 in molten salts begins with CO_2 absorption reactions to form CO_3^(2-), which is then followed by the carbon deposition at the cathode and O_2 evolution at the anode. As a result, CO_2 is electro-converted to O_2 and carbon with different morphologies, compositions, microstructures and functional properties. This report introduces the MSCC-ET process, summarizes the reactions occurring in the molten salts and at the electrode surfaces, as well as the morphological variations of the cathodic products. The inert anode materials, cost estimation and scale-up evaluation of the process are then discussed. It is presumed that with a comprehensive understanding of the electrode reactions during electrolysis and the functional properties of carbon materials obtained during CO_2 electro-splitting can provide a foundation for further developing this environmentally friendly process.
基金National Key R&D Program of China under Grant,Grant/Award Number:2021YFC1910601National Natural Science Foundation of China,Grant/Award Number:52104402HBIS Group Co.,Ltd Key R&D Program under Grant,Grant/Award Numbers:20210032,HG2022111。
文摘Due to their environmentally friendly nature and high energy density,direct ethanol fuel cells have attracted extensive research attention in recent decades.However,the actual Faraday efficiency of the ethanol oxidation reaction(EOR)is much lower than its theoretical value and the reaction kinetics of the EOR is sluggish due to insufficient active sites on the electrocatalyst surface.Pt/C is recognized as one of the most promising electrocatalysts for the EOR.Thus,the microscopic interfacial reaction mechanisms of the EOR on Pt/C were systematically studied in this work.In metal hydroxide solutions,hydrated alkali cations were found to bind with OH_(ad)through noncovalent interactions to form clusters and occupy the active sites on the Pt/C electrocatalyst surface,thus resulting in low Faraday efficiency and sluggish kinetics of the EOR.To reduce the negative effect of the noncovalent interactions on the EOR,a shield was made on the electrocatalyst surface using 4-trifluoromethylphenyl,resulting in twice the EOR catalytic reactivity of Pt/C.
