In order to explore the reaction mechanism of Fe^3＋ and the mineralization effect of the micropollutant, Fe^3＋ assisted photocatalytic oxidation of sulfadiazine （SD） in the TiO2 suspended solution is investigated....In order to explore the reaction mechanism of Fe^3＋ and the mineralization effect of the micropollutant, Fe^3＋ assisted photocatalytic oxidation of sulfadiazine （SD） in the TiO2 suspended solution is investigated. The effect of Fe^3＋ participation, the degradation kinetics of SD, the effect of SD mineralization and the possible mechanism of Fe^3＋ participation in TiO2 suspension are analyzed by adding FeCl3, taking samples at a given time and determining the SD concentration. Results indicate that the degradation of SD catalyzed by TiO2/ Fe^3＋ is faster than that catalyzed by TiO2 or Fe^3＋ separately. The photocatalytic degradation of SD follows the pseudo-first- order kinetics model in a range of 20 to 80 mg/L of initial concentration. The mineralization rate of SD can be enhanced by the addition of Fe^3＋ in the TiO2 suspended solution. The mechanism of the rapid degradation of SD is proposed, which indicates that Fe^3＋ adsorbed on the surface of TiO2 particles acts as an electron acceptor. The amount of recombining electronhole pairs decreases, and the amount of hydroxyl radicals increases. The increased hydroxyl radical strengthens the degradation of SD in the TiO2/Fe^3＋ suspended solution.展开更多
This study investigated the positive effect of surface modification with ozone on the photocatalytic performance of anatase TiO2 with dominated（001） facets for toluene degradation.The performance of photocatalyst wa...This study investigated the positive effect of surface modification with ozone on the photocatalytic performance of anatase TiO2 with dominated（001） facets for toluene degradation.The performance of photocatalyst was tested on a home-made volatile organic compounds degradation system. The ozone modification, toluene adsorption and degradation mechanism were established by a combination of various characterization methods, in situ diffuse reflectance infrared fourier transform spectroscopy, and density functional theory calculation.The surface modification with ozone can significantly enhance the photocatalytic degradation performance for toluene. The abundant unsaturated coordinated 5 c-Ti sites on（001）facets act as the adsorption sites for ozone. The formed Ti–O bonds reacted with H2O to generate a large amount of isolated Ti5 c-OH which act as the adsorption sites for toluene,and thus significantly increase the adsorption capacity for toluene. The outstanding photocatalytic performance of ozone-modified TiO2 is due to its high adsorption ability for toluene and the abundant surface hydroxyl groups, which produce very reactive OH·radicals under irradiation. Furthermore, the O2 generated via ozone dissociation could combine with the photogenerated electrons to form superoxide radicals which are also conductive to the toluene degradation.展开更多
By loading nanometer anatase onto exfoliated graphite with the sol-gel method, exfoliated graphite-TiO2 composite （EG-TiO2） can be prepared, which can adsorb oil and can also degrade oil. In a technologic condition ...By loading nanometer anatase onto exfoliated graphite with the sol-gel method, exfoliated graphite-TiO2 composite （EG-TiO2） can be prepared, which can adsorb oil and can also degrade oil. In a technologic condition for preparing EG-TiO2, the impregnated number of times is the most important factor to influence oil-adsorbing capability, that is, when the impregnated number of times increases, the amount of saturation-adsorbed oil decreases. The study of EG-TiO2 photocatalytic degradation of machine oil based on the weight-loss method and infrared spectrum method indicates that EG-TiO2 has obvious effect of photocatalytic degradation for machine oil. Its performance is superior to pure nanometer TiO2 powder because nanometer TiO2 in EG-TiO2 has three-dimension laminar structure and comparatively high adsorption capability.展开更多
Anatase TiO2 films were successfully prepared on foam nickel substrates by sol-gel technique using tetrabutyl titanate as precursor. The characteristics of the TiO2 films were investigated by XPS, XRD, FE-SEM, TEM and...Anatase TiO2 films were successfully prepared on foam nickel substrates by sol-gel technique using tetrabutyl titanate as precursor. The characteristics of the TiO2 films were investigated by XPS, XRD, FE-SEM, TEM and UV-Vis absorption spectra. The photocatalytic activities of TiO2 films were investigated by photocatalytic degradation reactions of gaseous acetaldehyde, an indoor pollutant, under ultraviolet light irradiation. It was found that Ni^2＋ doping into TiO2 films due to the foam nickel substrates resulted in the extension of absorption edges of TiO2 films from UV region to visible light region. The pre-heating for foam nickel substrates resulted in the formation of NiO layer, which prevented effectively the injection of photogenerated electrons from TiO2 films to metal nickel. The TiO2 films displayed high photocatalytic activity for the degradation of acetaldehyde, and were enhanced by calcining the substrates and coating TiO2 films repeatedly. The high activity was mainly attributed to the improvement of the characteristics of substrate surface and the increase of active sites on photocatalyst.展开更多
Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most de...Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials;the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron- hole separation, photocatalytic H2 evolution, and dye degradation over TiO2 nanosheets. OA-modified TiO2 samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H2 evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO2 photocatalyst reached 2.37 mmol g^–1 h^–1 and 1.43 × 10^-2 min^-1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO2, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO2. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.展开更多
Sulfur doped anatase TiO2 nanoparticles （3 nm- 12 nm） were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3 M NaOH at room temperature. The electro-optical and photoc...Sulfur doped anatase TiO2 nanoparticles （3 nm- 12 nm） were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3 M NaOH at room temperature. The electro-optical and photocatalytic properties of the synthesized sulfur doped TiO2 nanoparticles were studied along with Degussa commercial TiO2 particles （24 nm）. The results show that band gap of TiO2 particles decreases from 3.31 to 3.25 eV and for that of commercial TiO2 to 3.2 eV when the particle sizes increased from 3 nm to 12 nm with increase in sulfur doping. The results of the photocatalytic activity under UV and sun radiation show maximum phenol conversion at the particle size of 4 nm at 4.80% S-doping. Similar results are obtained using UV energy for both phenol conversion and conversion of CO2＋H2O in which formation of methanol, ethanol and proponal is observed. Production of methanol is also achieved on samples with a particle size of 8 and 12 nm and sulfur doping of 4.80% and 5.26%. For TiO2 particle of 4 nm without S doping, the production of methanol, ethanol and proponal was lower as compared to the S-doped particles. This is attributed to the combined electronic effect and band gap change, S dopant, specific surface area and the light source used.展开更多
An innovative photoelectrode, B 2O 3·TiO 2/Ti electrode, was prepared by galvanostaticanodisation. The morphology and crystalline texture of the B 2O 3·TiO 2 film on electrode were examined by atomic f...An innovative photoelectrode, B 2O 3·TiO 2/Ti electrode, was prepared by galvanostaticanodisation. The morphology and crystalline texture of the B 2O 3·TiO 2 film on electrode were examined by atomic force microscopy(AFM) and X-ray diffraction respectively. The examination results indicated that the anatase was the dominant component. The kinetics of photoelectrocatalytic(PEC) degradation of humic acid(HA) was investigated; the results demonstrated that effects from strongness to weakness on the photoelectrocatalytic degraded rate of humic acid: power of UV-lamp, area of TiO 2 film, bias, original concentration of humic acid solution. The optimum conditions were power of UV-lamp 125 W, area of TiO 2 film 42.0 cm 2, bias 1.4 V, original concentration of humic acid solution 5 mg/L in this PEC reaction system.展开更多
Hierarchical TiO2 hollow nanoboxes(TiO2‐HNBs)assembled from TiO2 nanosheets(TiO2‐NSs)show improved photoreactivity when compared with the building blocks of discrete TiO2‐NSs.However,TiO2‐HNBs can only be excited ...Hierarchical TiO2 hollow nanoboxes(TiO2‐HNBs)assembled from TiO2 nanosheets(TiO2‐NSs)show improved photoreactivity when compared with the building blocks of discrete TiO2‐NSs.However,TiO2‐HNBs can only be excited by ultraviolet light.In this paper,visible‐light‐responsive N and S co‐doped TiO2‐HNBs were prepared by calcining the mixture of cubic TiOF2 and methionine(C5H11NO2S),a N‐and S‐containing biomacromolecule.The effect of calcination temperature on the structure and performance of the TiO2‐HNBs was systematically studied.It was found that methionine can prevent TiOF2‐to‐anatase TiO2 phase transformation.Both N and S elements are doped into the lattice of TiO2‐HNBs when the mixture of TiOF2 and methionine undergoes calcination at 400°C,which is responsible for the visible‐light response.When compared with that of pure 400°C‐calcined TiO2‐HNBs(T400),the photoreactivity of 400°C‐calcined methionine‐modified TiO2‐HNBs(TM400)improves 1.53 times in photocatalytic degradation of rhodamine‐B dye under visible irradiation(?>420 nm).The enhanced visible photoreactivity of methionine‐modified TiO2‐HNBs is also confirmed by photocatalytic oxidation of NO.The successful doping of N and S elements into the lattice of TiO2‐HNBs,resulting in the improved light‐harvesting ability and efficient separation of photo‐generated electron‐hole pairs,is responsible for the enhanced visible photocatalytic activity of methionine‐modified TiO2‐HNBs.The photoreactivity of methionine modified TiO2‐HNBs remains nearly unchanged even after being recycled five times,indicating its promising use in practical applications.展开更多
Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET an...Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET and SEM.Photodegradation of omethoate was studied with H2O2 as oxidant and TiO2 supported on NaY zeolite as photocatalyst.Parameters involved in the photo-catalysis of omethoate,i.e.,the calcination temperature of the photocatalyst,initial omethoate concentration,the amount of TiO2 loaded on NaY zeolite,photocatalyst dosage and H2O2 concentration were investigated in detail.The results show that TiO2/NaY zeolite prepared by means of sol-gel method exhibited a good photocatalytic activity for the degradation of omethoate.Optimum conditions included the calcination temperature of photocatalyst 550℃,initial omethoate concentration 500 mg/L,the amount of TiO2 loaded on NaY zeolite 35%（mass fraction）,the amount of photocatalyst 5 g/L,H2O2 concentration 30 mL/L and an irradiation time of 180 min.The removal of omethoate was up to 93%.Kinetics parameters of the photocatalytic degradation of omethoate were measured and calculated.The result shows the kinetics of photocatalytic degradation of omethoate is first-order.展开更多
[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of diff...[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of different reaction time,initial pH value,H2O2 concentration,Fe2+ concentration,TiO2 dosage,light intensity,initial concentration of microcystin on UV/Fenton/TiO2 heterogeneous photocatalytic degradation of microcystin were investigated,and removal effects of microcystin between heterogeneous photocatalytic degradation and UV photolysis were compared at the same time.[Result] Under the conditions that the initial concentration of H2O2 was 0.1 mmol/L,[H2O2]/[FeSO4] was 15:1,pH value was 4.0,the distance between the reaction solution and UV lamp tube was 1 cm,TiO2 dosage was 0.05 g/L,reaction temperature was (16±2) ℃,the removal rate of MC-RR with concentration of 0.35 mg/L and MC-LR with concentration of 0.29 mg/L could reach 91.5% and 90.2% after 3 minutes reacting.[Conclusion] UV/Fenton/TiO2 photocatalytic oxidation was proved to be effective in degradating microcystins.展开更多
H3PW12O40/TiO2-SiO2 was synthesized by impregnation method which significantly improved the catalytic activity under simulated natural light. The prop- erties of the samples were characterized by Fourier trans- form i...H3PW12O40/TiO2-SiO2 was synthesized by impregnation method which significantly improved the catalytic activity under simulated natural light. The prop- erties of the samples were characterized by Fourier trans- form infrared spectra （FTIR）, X-ray powder diffraction pattern （XRD）, Scanning electron micrographs （SEM）, and Zeta potential. Degradation of methyl violet was used as a probe reaction to explore the influencing factors on the photodegradation reaction. The results show that the opti- mal conditions are as follows： initial concentration of methyl violet of 10 mg·L^-1, pH of 3.0, catalyst dosage of 2.9 g·L^-1, and light irradiation time of 2.5 h. Under these conditions, the degradation rate of methyl violet is 95.4 %. The reaction on photodegradation for methyl violet can be expressed as the first-order kinetic model, and the possible mechanism for the photocatalysis under simulated natural light is suggested. After used continuously for five times, the catalyst keeps the inherent photocatalytic activity for degradation of dyes. The photodegradation of methyl orange, methyl red, naphthol green B, and methylene blue was also tested, and the degradation rate of dyes can reach 81%-100%.展开更多
Objective To investigate the photocatalytic degradation of gaseous ammonia in static state by using nano-TiO2 as photoeatalyst supported on latex paint film under UV-irradiation. Methods Experiments were conducted to ...Objective To investigate the photocatalytic degradation of gaseous ammonia in static state by using nano-TiO2 as photoeatalyst supported on latex paint film under UV-irradiation. Methods Experiments were conducted to study the relationship between the initial concentration of ammonia and the degradation products competing to be adsorbed on catalyst surface. Degradation of ammonia and its products were detected by spectrophotometry and catalytic kinetic spectrophotometry, respectively. Results On the one hand, TiO2 catalyst was excellent for degradation of ammonia, and the crystal phase of TiO2, anatase or ruffle, had little effect on degradation of ammonia, but the conversion of ammonia grew with the increase of catalyst content. On the other hand, apparent rate constant and conversion of ammonia decreased with the increase of initial concentration of ammonia, and the photocatalytic degradation reaction followed a pseudo-first-order expression due to-the evidence of linear correlation between -lnC/C0 vs. irradiation time t, but the relationship between initial concentration and the degradation products was not linear in low initial concentration. Conclusion Whether the photocatalytic degradation of ammonia in static state follows a first-order reaction depends on the initial ammonia concentration due to competition in adsorption between reactant and the degradation products.展开更多
To promote the photocatalytic performance TiO2 and enlarge its application in visible region, carbon doped TiO2 (C/TiO2) composites were synthesized by wet impregnation method using sucrose as a precursor and used for...To promote the photocatalytic performance TiO2 and enlarge its application in visible region, carbon doped TiO2 (C/TiO2) composites were synthesized by wet impregnation method using sucrose as a precursor and used for phenol photocatalytic reaction. The synthesized products were characterized by Nitrogen adsorption-desorption isotherms (BET), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-visible diffuse reflectance spectroscopy (UV-vis) techniques. The results showed that the obtained TiO2 was anatase phase in the C/TiO2 products, and its crystallite size was 11.7 nm, respectively. Carbon amount and calcined temperature of C/TiO2 can promote phenol removal. In this experiment, 5% carbon and 500 ℃ are the best choice for photocatalyst preparation. Under the UV light irradiation, 5%C/TiO2 (500 ℃, 2 h) exhibited the efficiency of 70.0% for phenol degradation within 150 min whereas TiO2 (500 ℃, 2 h) had 53.0% in the same duration of time. Also 5%C/TiO2 (500 ℃, 2 h) has higher photocatalytic performance under sunlight than pure TiO2. A combination of factors that include the smallest crystalline size, higher anatase percent, less band gap energy value and more oxygen vacant resulted in higher photocatalytic activities of 5%C/TiO2 (500 ℃, 2 h).展开更多
A series of graphene–TiO2photocatalysts was synthesized by doping TiO2 with graphene oxide via hydrothermal treatment. The photocatalytic capability of the catalysts under ultraviolet irradiation was evaluated in ter...A series of graphene–TiO2photocatalysts was synthesized by doping TiO2 with graphene oxide via hydrothermal treatment. The photocatalytic capability of the catalysts under ultraviolet irradiation was evaluated in terms of sodium pentachlorophenol（PCP-Na） decomposition and mineralization. The structural and physicochemical properties of these nanocomposites were characterized by X-ray diffraction, N2adsorption–desorption, transmission electron microscopy, scanning electron microscopy, Ultraviolet–visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance spectra, and Fourier-transform infrared spectroscopy. The graphene–TiO2nanocomposites exhibited higher photocatalytic efficiency than commercial P25 for the degradation of PCP-Na, and 63.4% to 82.9% of the total organic carbon was fully mineralized. The improved photocatalytic activity may be attributed to the accelerated interfacial electron-transfer process and the significantly prolonged lifetime of electron-hole pairs imparted by graphene sheets in the nanocomposites. However,excessive graphene and the inhomogeneous aggregation of TiO2 nanoparticles may decrease photodegradation efficiency.展开更多
The role of oxygen and the generation of active radicals in the photocatalitic degradation of phenol were investigated using the eosin sensitized TiO2 as photocatalyst under visible light irradiation. Diffuse reflecta...The role of oxygen and the generation of active radicals in the photocatalitic degradation of phenol were investigated using the eosin sensitized TiO2 as photocatalyst under visible light irradiation. Diffuse reflectance spectra show that the absorbancy range of eosin/TiO2 is expanded from 378 nm (TiO2 ) to about 600 nm. The photocatalitic degradation of phenol is almost stopped when the eosin/TiO2 system is saturated with N2 , which indicates the significance of O2 . The addition of NaN 3 (a quencher of single oxygen) causes about a 62% decrease in the phenol degradation. The phenol degradation ratio is dropped from 92% to 75% when the isopropanol (a quencher of hydroxyl radical) is present in the system. The experimental results show that there are singlet oxygen and hydroxyl radical generated in the eosin/TiO2 system under visible light irradiation. The changes of absorbancy indicate that the hydrogen peroxide might be produced. Through the analysis and comparison, it is found that the singlet oxygen is the predominant active radical for the degradation of phenol.展开更多
Highly active mesoporous TiO_2 of about 6 nm crystal size and 280.7 m^2/g specific surface areas has been successfully synthesized via controlled hydrolysis of titanium butoxide at acidic medium. It was characterized ...Highly active mesoporous TiO_2 of about 6 nm crystal size and 280.7 m^2/g specific surface areas has been successfully synthesized via controlled hydrolysis of titanium butoxide at acidic medium. It was characterized by means of XRD（X-ray diffraction）, SEM（scanning electron microscopy）, TEM（transmission electron microscopy）, FT-IR（Fourier transform infrared spectroscopy）, TGA（thermogravimetric analysis）, DSC（differential scanning calorimetry） and BET（Brunauer–Emmett–Teller） surface area. The degradation of dichlorophenol-indophenol（DCPIP） under ultraviolet（UV） light was studied to evaluate the photocatalytic activity of samples. The effects of different parameters and kinetics were investigated. Accordingly, a complete degradation of DCPIP dye was achieved by applying the optimal operational conditions of 1 g/L of catalyst, 10 mg/L of DCPIP, pH of 3 and the temperature at 25 ± 3°C after 3 min under UV irradiation. Meanwhile, the Langmuir–Hinshelwood kinetic model described the variations in pure photocatalytic branch in consistent with a first order power law model.The results proved that the prepared TiO_2 nanoparticle has a photocatalytic activity significantly better than Degussa P-25.展开更多
TiO2 nanotube （TINT） electrodes anodized in fluorinated organic solutions were successfully prepared on Ti sheets. Field-emission scanning electron microscopy （FE-SEM） and X-ray diffraction （XRD） were performed ...TiO2 nanotube （TINT） electrodes anodized in fluorinated organic solutions were successfully prepared on Ti sheets. Field-emission scanning electron microscopy （FE-SEM） and X-ray diffraction （XRD） were performed to characterize the TiNT electrodes. The linear voltammetry results under irradiation showed that the TiNT electrode annealed at 450℃ presented the highest photoelectrochemical activity. By combining photocatalytic with electrochemical process, a significantly synergetic effect on ammonia degradation was observed with Na2SO4 as supporting electrolyte at pH 10.7. Furthermore, the photoelectrocatalytic efficiency on the ammonia degradation was greatly enhanced in presence of chloride ions without the limitation ofpH. The degradation rate was improved by 14.8 times reaching 4.98 × 10^-2 min^-1 at pH 10.7 and a faster degradation rate of 6.34 × 10^-2 min^-1 was obtained at pH 3.01. The in situ photoelectrocatalytic generated active chlorine was proposed to be responsible for the improved efficiency. On the other hand, an enhanced degradation of ammonia using TiNT electrode fabricated in fluorinated organic solution was also confirmed compared to TiNT electrode anodized in fluorinated water solution and TiO2 film electrode fabricated by sol-gel method. Finally, the effect of chloride concentration was also discussed.展开更多
The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly o...The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly on the prepared TiO2-NiO composite surface electrode. In addition to NiO, the composite also formed NiTiO3 that increased with increasing calcination temperature. Photoelectrocatalytic degradation of Rhodamine B (RB) using this electrode was investigated, and anodic potential and pH were optimized. RB degradation was investigated under different conditions, and it showed that photoelectrocatalytic degradation could achieve efficient and complete mineralization of organic pollutant. Through comparison of the photoelectrocatalytic oxidation using the Ti/TiO2-NiO electrode operated by single photoanode with the Ti/TiO2-NiO electrode operated by several photoanode, it was found that the photoelectrocatalytic efficiency of that by series photoanodes was higher. Additionally, photoelectrocatalytic system was performed at the several different photoelectrodes, which verified the higher photocatalytic activity compared with the single photoelectrode.展开更多
In situ FTIR spectroscopy was utilized to investigate the magnetic field effect on the heterogeneous photocatalytic degradation of benzene over platinized titania （Pt/TiO2）. The results revealed that the employment ...In situ FTIR spectroscopy was utilized to investigate the magnetic field effect on the heterogeneous photocatalytic degradation of benzene over platinized titania （Pt/TiO2）. The results revealed that the employment of magnetic field may not change the mechanism of photocatalytic degradation of benzene, however, it greatly facilitate the conversion of benzene to phenol and quinone, as well as the transformation from phenol to quinone, resulting in opening the benzene ring easily and promoting the production of CO2.展开更多
Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orth...Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orthomono- chlorphenol solutions by ultraviolet, the strong adsorption capability of the zeolite results in increased concentration of substrate on its surface. The Ti（h film coated on feather zeolite further enhances the photocatalytic activity. The TiO~ film on the zeolite prepared by the Sol-gel method is found more effective as a catalyst than that by two powder coating methods.展开更多
基金The Priority Academic Program Development of Jiangsu Higher Education Institutions (No. 1105007001 )the Ph. D. Programs Foundation of Ministry of Education of China (No. 20100092120018)the Natural Science Foundation of Jiangsu Province (No. BK2009453)
文摘In order to explore the reaction mechanism of Fe^3＋ and the mineralization effect of the micropollutant, Fe^3＋ assisted photocatalytic oxidation of sulfadiazine （SD） in the TiO2 suspended solution is investigated. The effect of Fe^3＋ participation, the degradation kinetics of SD, the effect of SD mineralization and the possible mechanism of Fe^3＋ participation in TiO2 suspension are analyzed by adding FeCl3, taking samples at a given time and determining the SD concentration. Results indicate that the degradation of SD catalyzed by TiO2/ Fe^3＋ is faster than that catalyzed by TiO2 or Fe^3＋ separately. The photocatalytic degradation of SD follows the pseudo-first- order kinetics model in a range of 20 to 80 mg/L of initial concentration. The mineralization rate of SD can be enhanced by the addition of Fe^3＋ in the TiO2 suspended solution. The mechanism of the rapid degradation of SD is proposed, which indicates that Fe^3＋ adsorbed on the surface of TiO2 particles acts as an electron acceptor. The amount of recombining electronhole pairs decreases, and the amount of hydroxyl radicals increases. The increased hydroxyl radical strengthens the degradation of SD in the TiO2/Fe^3＋ suspended solution.
基金the National Natural Science Foundation of China (U1632273, 21673214,U1732272, U1832165).
文摘This study investigated the positive effect of surface modification with ozone on the photocatalytic performance of anatase TiO2 with dominated（001） facets for toluene degradation.The performance of photocatalyst was tested on a home-made volatile organic compounds degradation system. The ozone modification, toluene adsorption and degradation mechanism were established by a combination of various characterization methods, in situ diffuse reflectance infrared fourier transform spectroscopy, and density functional theory calculation.The surface modification with ozone can significantly enhance the photocatalytic degradation performance for toluene. The abundant unsaturated coordinated 5 c-Ti sites on（001）facets act as the adsorption sites for ozone. The formed Ti–O bonds reacted with H2O to generate a large amount of isolated Ti5 c-OH which act as the adsorption sites for toluene,and thus significantly increase the adsorption capacity for toluene. The outstanding photocatalytic performance of ozone-modified TiO2 is due to its high adsorption ability for toluene and the abundant surface hydroxyl groups, which produce very reactive OH·radicals under irradiation. Furthermore, the O2 generated via ozone dissociation could combine with the photogenerated electrons to form superoxide radicals which are also conductive to the toluene degradation.
文摘By loading nanometer anatase onto exfoliated graphite with the sol-gel method, exfoliated graphite-TiO2 composite （EG-TiO2） can be prepared, which can adsorb oil and can also degrade oil. In a technologic condition for preparing EG-TiO2, the impregnated number of times is the most important factor to influence oil-adsorbing capability, that is, when the impregnated number of times increases, the amount of saturation-adsorbed oil decreases. The study of EG-TiO2 photocatalytic degradation of machine oil based on the weight-loss method and infrared spectrum method indicates that EG-TiO2 has obvious effect of photocatalytic degradation for machine oil. Its performance is superior to pure nanometer TiO2 powder because nanometer TiO2 in EG-TiO2 has three-dimension laminar structure and comparatively high adsorption capability.
基金Project supported by the Special Foundation of Nanometer Technology from Shanghai Municipal Science and Technology Commis-sion(STCSM) (No. 0552nm002).
文摘Anatase TiO2 films were successfully prepared on foam nickel substrates by sol-gel technique using tetrabutyl titanate as precursor. The characteristics of the TiO2 films were investigated by XPS, XRD, FE-SEM, TEM and UV-Vis absorption spectra. The photocatalytic activities of TiO2 films were investigated by photocatalytic degradation reactions of gaseous acetaldehyde, an indoor pollutant, under ultraviolet light irradiation. It was found that Ni^2＋ doping into TiO2 films due to the foam nickel substrates resulted in the extension of absorption edges of TiO2 films from UV region to visible light region. The pre-heating for foam nickel substrates resulted in the formation of NiO layer, which prevented effectively the injection of photogenerated electrons from TiO2 films to metal nickel. The TiO2 films displayed high photocatalytic activity for the degradation of acetaldehyde, and were enhanced by calcining the substrates and coating TiO2 films repeatedly. The high activity was mainly attributed to the improvement of the characteristics of substrate surface and the increase of active sites on photocatalyst.
基金supported by the National Natural Science Foundation of China(51672113,51602132)the Six Talent Peaks Project in Jiangsu Province(2015-XCL-026)+2 种基金the Natural Science Foundation of Jiangsu Province(BK20171299)the Training Project of Jiangsu University for Young Cadre Teachers(5521220009)the Youth Research Project of Jiangsu Health and Family Planning Commission in 2016(Q201609)~~
文摘Accelerating the separation efficiency of photoexcited electron-hole pairs with the help of highly active co-catalysts has proven to be a promising approach for improving photocatalytic activity. Thus far, the most developed co-catalysts for semiconductor-based photocatalysis are inorganic materials;the employment of a specific organic molecule as a co-catalyst for photocatalytic hydrogen evolution and pollutant photodegradation is rare and still remains a challenging task. Herein, we report on the use of an organic molecule, oxamide (OA), as a novel co-catalyst to enhance electron- hole separation, photocatalytic H2 evolution, and dye degradation over TiO2 nanosheets. OA-modified TiO2 samples were prepared by a wet chemical route and demonstrated improved light absorption in the visible-light region and more efficient charge transport. The photocatalytic performance of H2 evolution from water splitting and rhodamine B (RhB) degradation for an optimal OA-modified TiO2 photocatalyst reached 2.37 mmol g^–1 h^–1 and 1.43 × 10^-2 min^-1, respectively, which were 2.4 and 3.8 times higher than those of pristine TiO2, respectively. A possible mechanism is proposed, in which the specific π-conjugated structure of OA is suggested to play a key role in the enhancement of the charge transfer and catalytic capability of TiO2. This work may provide advanced insight into the development of a variety of metal-free organic molecules as functional co-catalysts for improved solar-to-fuel conversion and environmental remediation.
文摘Sulfur doped anatase TiO2 nanoparticles （3 nm- 12 nm） were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3 M NaOH at room temperature. The electro-optical and photocatalytic properties of the synthesized sulfur doped TiO2 nanoparticles were studied along with Degussa commercial TiO2 particles （24 nm）. The results show that band gap of TiO2 particles decreases from 3.31 to 3.25 eV and for that of commercial TiO2 to 3.2 eV when the particle sizes increased from 3 nm to 12 nm with increase in sulfur doping. The results of the photocatalytic activity under UV and sun radiation show maximum phenol conversion at the particle size of 4 nm at 4.80% S-doping. Similar results are obtained using UV energy for both phenol conversion and conversion of CO2＋H2O in which formation of methanol, ethanol and proponal is observed. Production of methanol is also achieved on samples with a particle size of 8 and 12 nm and sulfur doping of 4.80% and 5.26%. For TiO2 particle of 4 nm without S doping, the production of methanol, ethanol and proponal was lower as compared to the S-doped particles. This is attributed to the combined electronic effect and band gap change, S dopant, specific surface area and the light source used.
文摘An innovative photoelectrode, B 2O 3·TiO 2/Ti electrode, was prepared by galvanostaticanodisation. The morphology and crystalline texture of the B 2O 3·TiO 2 film on electrode were examined by atomic force microscopy(AFM) and X-ray diffraction respectively. The examination results indicated that the anatase was the dominant component. The kinetics of photoelectrocatalytic(PEC) degradation of humic acid(HA) was investigated; the results demonstrated that effects from strongness to weakness on the photoelectrocatalytic degraded rate of humic acid: power of UV-lamp, area of TiO 2 film, bias, original concentration of humic acid solution. The optimum conditions were power of UV-lamp 125 W, area of TiO 2 film 42.0 cm 2, bias 1.4 V, original concentration of humic acid solution 5 mg/L in this PEC reaction system.
基金supported by the National Natural Science Foundation of China(31402137,51672312,21373275)Hubei Province Science Fund for Distinguished Yong Scholars(2013CFA034)+2 种基金the Program for Excellent Talents in Hubei Province(RCJH15001)the Science and Technology Program of Wuhan(2016010101010018)the Fundamental Research Funds for the Central University,South-Central University for Nationalities(CZP17077,CZP18016)~~
文摘Hierarchical TiO2 hollow nanoboxes(TiO2‐HNBs)assembled from TiO2 nanosheets(TiO2‐NSs)show improved photoreactivity when compared with the building blocks of discrete TiO2‐NSs.However,TiO2‐HNBs can only be excited by ultraviolet light.In this paper,visible‐light‐responsive N and S co‐doped TiO2‐HNBs were prepared by calcining the mixture of cubic TiOF2 and methionine(C5H11NO2S),a N‐and S‐containing biomacromolecule.The effect of calcination temperature on the structure and performance of the TiO2‐HNBs was systematically studied.It was found that methionine can prevent TiOF2‐to‐anatase TiO2 phase transformation.Both N and S elements are doped into the lattice of TiO2‐HNBs when the mixture of TiOF2 and methionine undergoes calcination at 400°C,which is responsible for the visible‐light response.When compared with that of pure 400°C‐calcined TiO2‐HNBs(T400),the photoreactivity of 400°C‐calcined methionine‐modified TiO2‐HNBs(TM400)improves 1.53 times in photocatalytic degradation of rhodamine‐B dye under visible irradiation(?>420 nm).The enhanced visible photoreactivity of methionine‐modified TiO2‐HNBs is also confirmed by photocatalytic oxidation of NO.The successful doping of N and S elements into the lattice of TiO2‐HNBs,resulting in the improved light‐harvesting ability and efficient separation of photo‐generated electron‐hole pairs,is responsible for the enhanced visible photocatalytic activity of methionine‐modified TiO2‐HNBs.The photoreactivity of methionine modified TiO2‐HNBs remains nearly unchanged even after being recycled five times,indicating its promising use in practical applications.
基金Supported by the Natural Science Foundation of Hebei Province,China(No.203364)
文摘Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET and SEM.Photodegradation of omethoate was studied with H2O2 as oxidant and TiO2 supported on NaY zeolite as photocatalyst.Parameters involved in the photo-catalysis of omethoate,i.e.,the calcination temperature of the photocatalyst,initial omethoate concentration,the amount of TiO2 loaded on NaY zeolite,photocatalyst dosage and H2O2 concentration were investigated in detail.The results show that TiO2/NaY zeolite prepared by means of sol-gel method exhibited a good photocatalytic activity for the degradation of omethoate.Optimum conditions included the calcination temperature of photocatalyst 550℃,initial omethoate concentration 500 mg/L,the amount of TiO2 loaded on NaY zeolite 35%（mass fraction）,the amount of photocatalyst 5 g/L,H2O2 concentration 30 mL/L and an irradiation time of 180 min.The removal of omethoate was up to 93%.Kinetics parameters of the photocatalytic degradation of omethoate were measured and calculated.The result shows the kinetics of photocatalytic degradation of omethoate is first-order.
基金Supported by the Social Development Scientific and Technolgical Project[GKHS-2007-1007]The Special Funds for Top Talents [GSZH-2007-108]The Special Project for Improving Researeh Conditionsof Guizhou [TZJF-2007-15]
文摘[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of different reaction time,initial pH value,H2O2 concentration,Fe2+ concentration,TiO2 dosage,light intensity,initial concentration of microcystin on UV/Fenton/TiO2 heterogeneous photocatalytic degradation of microcystin were investigated,and removal effects of microcystin between heterogeneous photocatalytic degradation and UV photolysis were compared at the same time.[Result] Under the conditions that the initial concentration of H2O2 was 0.1 mmol/L,[H2O2]/[FeSO4] was 15:1,pH value was 4.0,the distance between the reaction solution and UV lamp tube was 1 cm,TiO2 dosage was 0.05 g/L,reaction temperature was (16±2) ℃,the removal rate of MC-RR with concentration of 0.35 mg/L and MC-LR with concentration of 0.29 mg/L could reach 91.5% and 90.2% after 3 minutes reacting.[Conclusion] UV/Fenton/TiO2 photocatalytic oxidation was proved to be effective in degradating microcystins.
基金financially supported by the Hubei Key Laboratory of Pollutant Analysis & Reuse Technology (No.KL2013M08)
文摘H3PW12O40/TiO2-SiO2 was synthesized by impregnation method which significantly improved the catalytic activity under simulated natural light. The prop- erties of the samples were characterized by Fourier trans- form infrared spectra （FTIR）, X-ray powder diffraction pattern （XRD）, Scanning electron micrographs （SEM）, and Zeta potential. Degradation of methyl violet was used as a probe reaction to explore the influencing factors on the photodegradation reaction. The results show that the opti- mal conditions are as follows： initial concentration of methyl violet of 10 mg·L^-1, pH of 3.0, catalyst dosage of 2.9 g·L^-1, and light irradiation time of 2.5 h. Under these conditions, the degradation rate of methyl violet is 95.4 %. The reaction on photodegradation for methyl violet can be expressed as the first-order kinetic model, and the possible mechanism for the photocatalysis under simulated natural light is suggested. After used continuously for five times, the catalyst keeps the inherent photocatalytic activity for degradation of dyes. The photodegradation of methyl orange, methyl red, naphthol green B, and methylene blue was also tested, and the degradation rate of dyes can reach 81%-100%.
基金This work has been supported by Shandong Provincial Scientific Council, People’s Republic of China (Grant No. Z2000B01)
文摘Objective To investigate the photocatalytic degradation of gaseous ammonia in static state by using nano-TiO2 as photoeatalyst supported on latex paint film under UV-irradiation. Methods Experiments were conducted to study the relationship between the initial concentration of ammonia and the degradation products competing to be adsorbed on catalyst surface. Degradation of ammonia and its products were detected by spectrophotometry and catalytic kinetic spectrophotometry, respectively. Results On the one hand, TiO2 catalyst was excellent for degradation of ammonia, and the crystal phase of TiO2, anatase or ruffle, had little effect on degradation of ammonia, but the conversion of ammonia grew with the increase of catalyst content. On the other hand, apparent rate constant and conversion of ammonia decreased with the increase of initial concentration of ammonia, and the photocatalytic degradation reaction followed a pseudo-first-order expression due to-the evidence of linear correlation between -lnC/C0 vs. irradiation time t, but the relationship between initial concentration and the degradation products was not linear in low initial concentration. Conclusion Whether the photocatalytic degradation of ammonia in static state follows a first-order reaction depends on the initial ammonia concentration due to competition in adsorption between reactant and the degradation products.
基金Funded by Yunnan Provincial Agricultural Joint Project (No.2018FG001-051)Yunnan Provincial Department of Education Research Fund (No. 2020Y0414)
文摘To promote the photocatalytic performance TiO2 and enlarge its application in visible region, carbon doped TiO2 (C/TiO2) composites were synthesized by wet impregnation method using sucrose as a precursor and used for phenol photocatalytic reaction. The synthesized products were characterized by Nitrogen adsorption-desorption isotherms (BET), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-visible diffuse reflectance spectroscopy (UV-vis) techniques. The results showed that the obtained TiO2 was anatase phase in the C/TiO2 products, and its crystallite size was 11.7 nm, respectively. Carbon amount and calcined temperature of C/TiO2 can promote phenol removal. In this experiment, 5% carbon and 500 ℃ are the best choice for photocatalyst preparation. Under the UV light irradiation, 5%C/TiO2 (500 ℃, 2 h) exhibited the efficiency of 70.0% for phenol degradation within 150 min whereas TiO2 (500 ℃, 2 h) had 53.0% in the same duration of time. Also 5%C/TiO2 (500 ℃, 2 h) has higher photocatalytic performance under sunlight than pure TiO2. A combination of factors that include the smallest crystalline size, higher anatase percent, less band gap energy value and more oxygen vacant resulted in higher photocatalytic activities of 5%C/TiO2 (500 ℃, 2 h).
基金supported by the National Natural Science Foundation of China (No. 41371472)
文摘A series of graphene–TiO2photocatalysts was synthesized by doping TiO2 with graphene oxide via hydrothermal treatment. The photocatalytic capability of the catalysts under ultraviolet irradiation was evaluated in terms of sodium pentachlorophenol（PCP-Na） decomposition and mineralization. The structural and physicochemical properties of these nanocomposites were characterized by X-ray diffraction, N2adsorption–desorption, transmission electron microscopy, scanning electron microscopy, Ultraviolet–visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance spectra, and Fourier-transform infrared spectroscopy. The graphene–TiO2nanocomposites exhibited higher photocatalytic efficiency than commercial P25 for the degradation of PCP-Na, and 63.4% to 82.9% of the total organic carbon was fully mineralized. The improved photocatalytic activity may be attributed to the accelerated interfacial electron-transfer process and the significantly prolonged lifetime of electron-hole pairs imparted by graphene sheets in the nanocomposites. However,excessive graphene and the inhomogeneous aggregation of TiO2 nanoparticles may decrease photodegradation efficiency.
基金Project(8451063201001261) supported by the Guangdong Natural Science Fund Committee,ChinaProject(LYM08022) supported by the Foundation for Distinguished Young Talents in Higher Education of Guangdong,China+1 种基金Project (2007A032400001, 2008A030202010) supported by the Scientific and Technological Planning of Guangdong Province,ChinaProject(216113132) supported by the Scientific Research Cultivation and Innovation Fund, Jinan University,China
文摘The role of oxygen and the generation of active radicals in the photocatalitic degradation of phenol were investigated using the eosin sensitized TiO2 as photocatalyst under visible light irradiation. Diffuse reflectance spectra show that the absorbancy range of eosin/TiO2 is expanded from 378 nm (TiO2 ) to about 600 nm. The photocatalitic degradation of phenol is almost stopped when the eosin/TiO2 system is saturated with N2 , which indicates the significance of O2 . The addition of NaN 3 (a quencher of single oxygen) causes about a 62% decrease in the phenol degradation. The phenol degradation ratio is dropped from 92% to 75% when the isopropanol (a quencher of hydroxyl radical) is present in the system. The experimental results show that there are singlet oxygen and hydroxyl radical generated in the eosin/TiO2 system under visible light irradiation. The changes of absorbancy indicate that the hydrogen peroxide might be produced. Through the analysis and comparison, it is found that the singlet oxygen is the predominant active radical for the degradation of phenol.
基金funded by the Science and Technology Development Fund (STDF), Ministry of Scientific Research (No. 1414, "Quantum Dots Nanomaterials Dye Sensitized Solar Cells")
文摘Highly active mesoporous TiO_2 of about 6 nm crystal size and 280.7 m^2/g specific surface areas has been successfully synthesized via controlled hydrolysis of titanium butoxide at acidic medium. It was characterized by means of XRD（X-ray diffraction）, SEM（scanning electron microscopy）, TEM（transmission electron microscopy）, FT-IR（Fourier transform infrared spectroscopy）, TGA（thermogravimetric analysis）, DSC（differential scanning calorimetry） and BET（Brunauer–Emmett–Teller） surface area. The degradation of dichlorophenol-indophenol（DCPIP） under ultraviolet（UV） light was studied to evaluate the photocatalytic activity of samples. The effects of different parameters and kinetics were investigated. Accordingly, a complete degradation of DCPIP dye was achieved by applying the optimal operational conditions of 1 g/L of catalyst, 10 mg/L of DCPIP, pH of 3 and the temperature at 25 ± 3°C after 3 min under UV irradiation. Meanwhile, the Langmuir–Hinshelwood kinetic model described the variations in pure photocatalytic branch in consistent with a first order power law model.The results proved that the prepared TiO_2 nanoparticle has a photocatalytic activity significantly better than Degussa P-25.
基金supported by the National Natural Science Foundation of China (Nos. 21277134, 21107103)the State Key Laboratory of Environmental, Criteria and Risk Assessment Chinese Research Academy of Environmental Sciences
文摘TiO2 nanotube （TINT） electrodes anodized in fluorinated organic solutions were successfully prepared on Ti sheets. Field-emission scanning electron microscopy （FE-SEM） and X-ray diffraction （XRD） were performed to characterize the TiNT electrodes. The linear voltammetry results under irradiation showed that the TiNT electrode annealed at 450℃ presented the highest photoelectrochemical activity. By combining photocatalytic with electrochemical process, a significantly synergetic effect on ammonia degradation was observed with Na2SO4 as supporting electrolyte at pH 10.7. Furthermore, the photoelectrocatalytic efficiency on the ammonia degradation was greatly enhanced in presence of chloride ions without the limitation ofpH. The degradation rate was improved by 14.8 times reaching 4.98 × 10^-2 min^-1 at pH 10.7 and a faster degradation rate of 6.34 × 10^-2 min^-1 was obtained at pH 3.01. The in situ photoelectrocatalytic generated active chlorine was proposed to be responsible for the improved efficiency. On the other hand, an enhanced degradation of ammonia using TiNT electrode fabricated in fluorinated organic solution was also confirmed compared to TiNT electrode anodized in fluorinated water solution and TiO2 film electrode fabricated by sol-gel method. Finally, the effect of chloride concentration was also discussed.
文摘The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly on the prepared TiO2-NiO composite surface electrode. In addition to NiO, the composite also formed NiTiO3 that increased with increasing calcination temperature. Photoelectrocatalytic degradation of Rhodamine B (RB) using this electrode was investigated, and anodic potential and pH were optimized. RB degradation was investigated under different conditions, and it showed that photoelectrocatalytic degradation could achieve efficient and complete mineralization of organic pollutant. Through comparison of the photoelectrocatalytic oxidation using the Ti/TiO2-NiO electrode operated by single photoanode with the Ti/TiO2-NiO electrode operated by several photoanode, it was found that the photoelectrocatalytic efficiency of that by series photoanodes was higher. Additionally, photoelectrocatalytic system was performed at the several different photoelectrodes, which verified the higher photocatalytic activity compared with the single photoelectrode.
基金This work was supported financially by the National Natural Science Foundation of China(No.20133010)Education Department of Fujian(No.JB04238).
文摘In situ FTIR spectroscopy was utilized to investigate the magnetic field effect on the heterogeneous photocatalytic degradation of benzene over platinized titania （Pt/TiO2）. The results revealed that the employment of magnetic field may not change the mechanism of photocatalytic degradation of benzene, however, it greatly facilitate the conversion of benzene to phenol and quinone, as well as the transformation from phenol to quinone, resulting in opening the benzene ring easily and promoting the production of CO2.
文摘Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orthomono- chlorphenol solutions by ultraviolet, the strong adsorption capability of the zeolite results in increased concentration of substrate on its surface. The Ti（h film coated on feather zeolite further enhances the photocatalytic activity. The TiO~ film on the zeolite prepared by the Sol-gel method is found more effective as a catalyst than that by two powder coating methods.
