An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optim...An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm. Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.展开更多
The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic ...The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic crystal fiber(DCPCF)with four symmetrical air holes, placed above and below each core, filled with magnetic fluid(MF). The switch, which utilizes a magnetic field to change the coupling length ratio of the x and y polarization modes, enables dynamic tuning of the polarization state and extinction ratio. Numerical results show that when the working length is 36.638 mm, the magneto–optical polarization switch can operate in four communication bands, i.e., 1509 nm to 1520 nm, 1544 nm to1556 nm, 1578 nm to 1591 nm, and 1611 nm to 1624 nm. Moreover, the extinction ratio(ER) is greater than 20 d B in the fiber length range of 38.5 mm to 38.7 mm, indicating that the device has a good fault tolerance for the interception of the fiber length.展开更多
This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres wi...This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres with the multi-pole method. The complete mode coupling can take place when both the phase and loss matching conditions are satisfied at the avoided anti-crossing wavelength. It shows the influences of cladding structure parameters including the diameters of cladding air holes d1, diameters of outer core holes d2 and hole to hole pitch A on the characteristics of leaky modes coupling. The coupled-mode theory is used to analyse the mode transition characteristics and the complete coupling can be clearly indicated by comparing the real and imaginary parts of propagation constant of the leaky modes.展开更多
A team of researchers from the University of Science and Technology of China(USTC)of the Chinese Academy of Sciences(CAS)and its partners have made significant advancements in random quantum circuit sampling with Zuch...A team of researchers from the University of Science and Technology of China(USTC)of the Chinese Academy of Sciences(CAS)and its partners have made significant advancements in random quantum circuit sampling with Zuchongzhi-3,a superconducting quantum computing prototype featuring 105 qubits and 182 couplers.展开更多
目前,多核实时系统中同步任务的节能调度研究主要针对的是同构多核处理器平台,而异构多核处理器架构能够更有效地发挥系统性能。将现有的研究直接应用于异构多核系统,在保证可调度性的情况下会导致能耗变高。对此,通过使用动态电压与频...目前,多核实时系统中同步任务的节能调度研究主要针对的是同构多核处理器平台,而异构多核处理器架构能够更有效地发挥系统性能。将现有的研究直接应用于异构多核系统,在保证可调度性的情况下会导致能耗变高。对此,通过使用动态电压与频率调节(Dynamic Voltage Frequency Scaling,DVFS)技术,研究异构多核实时系统中基于任务同步的节能调度问题,提出同步感知的最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First,SA-LESF)。该算法针对所有任务的速度配置进行迭代优化,直至所有任务均达到其最大限度节能的速度配置。此外,进一步提出基于动态松弛时间回收的同步感知最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First with Dynamic Reclamation,SA-LESF-DR)。该算法在保证实时任务可调度的同时,实施相应的回收策略,进一步降低系统能耗。实验结果表明,SA-LESF与SA-LESF-DR算法在能耗表现上具有优势,在相同任务集下,相比其他算法可节省高达30%的能耗。展开更多
This paper presents a smart compensation system based on MCA7707 (a kind of signal processor). The li near errors and high order errors of a sensor (especially piezoresistive sensor) can be corrected by using this s...This paper presents a smart compensation system based on MCA7707 (a kind of signal processor). The li near errors and high order errors of a sensor (especially piezoresistive sensor) can be corrected by using this system. It can optimize the process of piezoresi stive sensor calibration and compensation, then, a total error factor within 0.2 % of the sensor′s repeatability errors is obtained. Data are recorded and coeff icients are determined automatically by this system, thus, the sensor compensati on is simplified greatly. For operating easily, a wizard compensation program is designed to correct every error and to get the optimum compensation.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61405096 and 61504058)the Introduction of Talent Research and Research Fund of Nanjing University of Posts and Telecommunications,China(Grant No.NY214158)+1 种基金the Open Fund of Laboratory of Solid State Microstructures,Nanjing University,China(Grant No.M28035)the Open Fund of State Key Laboratory of Transient Optics and Photonics,Chinese Academy of Sciences(Grant No.SKLST201404)
文摘An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber （GDC-PCF） that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm. Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.
基金supported by the National Key Research and Development Program of China “National Quality Infrastructure” (Grant No. 2021YFF0600902)。
文摘The research of high-performance polarization controllers is of great significance for expanding the application field of polarization optics. Here, a polarization switch is demonstrated by using a dual-core photonic crystal fiber(DCPCF)with four symmetrical air holes, placed above and below each core, filled with magnetic fluid(MF). The switch, which utilizes a magnetic field to change the coupling length ratio of the x and y polarization modes, enables dynamic tuning of the polarization state and extinction ratio. Numerical results show that when the working length is 36.638 mm, the magneto–optical polarization switch can operate in four communication bands, i.e., 1509 nm to 1520 nm, 1544 nm to1556 nm, 1578 nm to 1591 nm, and 1611 nm to 1624 nm. Moreover, the extinction ratio(ER) is greater than 20 d B in the fiber length range of 38.5 mm to 38.7 mm, indicating that the device has a good fault tolerance for the interception of the fiber length.
基金Project supported by the National Key Basic Research Special Foundation of China (Grant No. 2010CB327605)the National High-Technology Research and Development Program of China (Grant No. 2009AA01Z220)+2 种基金the Key Grant of the Chinese Ministry of Education (Grant No. 109015)the Discipline Co-construction Project of Beijing Municipal Commission of Education (Grant No. YB20081001301)the Open Fund of Key Laboratory of Information Photonics and Optical Communications (Beijing University of Posts and Telecommunications), Ministry of Education,and the Specialized Research Fund for the Doctoral Program of Beijing University of Posts and Telecommunications (Grant No. CX201023)
文摘This paper theoretically investigates the dependence of leaky mode coupling between inner core fundamental mode and outer core defect mode on phase and loss matching in pure silica dual-core photonic crystal fibres with the multi-pole method. The complete mode coupling can take place when both the phase and loss matching conditions are satisfied at the avoided anti-crossing wavelength. It shows the influences of cladding structure parameters including the diameters of cladding air holes d1, diameters of outer core holes d2 and hole to hole pitch A on the characteristics of leaky modes coupling. The coupled-mode theory is used to analyse the mode transition characteristics and the complete coupling can be clearly indicated by comparing the real and imaginary parts of propagation constant of the leaky modes.
文摘A team of researchers from the University of Science and Technology of China(USTC)of the Chinese Academy of Sciences(CAS)and its partners have made significant advancements in random quantum circuit sampling with Zuchongzhi-3,a superconducting quantum computing prototype featuring 105 qubits and 182 couplers.
文摘目前,多核实时系统中同步任务的节能调度研究主要针对的是同构多核处理器平台,而异构多核处理器架构能够更有效地发挥系统性能。将现有的研究直接应用于异构多核系统,在保证可调度性的情况下会导致能耗变高。对此,通过使用动态电压与频率调节(Dynamic Voltage Frequency Scaling,DVFS)技术,研究异构多核实时系统中基于任务同步的节能调度问题,提出同步感知的最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First,SA-LESF)。该算法针对所有任务的速度配置进行迭代优化,直至所有任务均达到其最大限度节能的速度配置。此外,进一步提出基于动态松弛时间回收的同步感知最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First with Dynamic Reclamation,SA-LESF-DR)。该算法在保证实时任务可调度的同时,实施相应的回收策略,进一步降低系统能耗。实验结果表明,SA-LESF与SA-LESF-DR算法在能耗表现上具有优势,在相同任务集下,相比其他算法可节省高达30%的能耗。
文摘This paper presents a smart compensation system based on MCA7707 (a kind of signal processor). The li near errors and high order errors of a sensor (especially piezoresistive sensor) can be corrected by using this system. It can optimize the process of piezoresi stive sensor calibration and compensation, then, a total error factor within 0.2 % of the sensor′s repeatability errors is obtained. Data are recorded and coeff icients are determined automatically by this system, thus, the sensor compensati on is simplified greatly. For operating easily, a wizard compensation program is designed to correct every error and to get the optimum compensation.
文摘仿真点(simulation point,SimPoint)作为一种代表性采样技术被广泛应用于处理器硅前性能评估中。SimPoint为每个待评估的程序根据贝叶斯信息准则确定仿真点数目。然而,标准测试集内不同程序有着不同的行为复杂程度,需要不同数目的仿真点来准确刻画其程序行为。SimPoint无法识别出不同程序间的复杂度差异,无法做到在总仿真点数目一定的情况下,将更多的仿真点分配给行为复杂的程序以降低这些程序的性能评估误差,将更少的仿真点分配给行为简单的程序而不损失这些程序的性能评估精度。由于没有在测试集内合理地进行仿真点分配,SimPoint虽然可以给出比较准确的平均性能评估误差,但是某些行为复杂的测试子项的性能评估误差依然较大。针对这一问题,本文优化了SimPoint的仿真点局部分配方式,提出了一种全局贪心分配方法———贪心点(greedy point,GreedyPoint)方法。该方法将仿真点的分配问题抽象为含约束的优化问题,使用微架构无关特征计算表征误差,通过全局贪心算法来求解该优化问题。实验数据表明,在相同仿真开销下,与SimPoint相比,GreedyPoint可以将SPEC CPU 2017测试套件的平均性能评估误差由3.23%降低到2.08%,最大性能评估误差由21.22%大幅降低至7.01%。
