Fissured clays exhibit unique geotechnical behaviors,with the stiffness characteristics evolving dynamically in response to environmental changes.To address this issue,reported here is a systematic assessment of how d...Fissured clays exhibit unique geotechnical behaviors,with the stiffness characteristics evolving dynamically in response to environmental changes.To address this issue,reported here is a systematic assessment of how dryingewetting(DW)cycles affect the small-strain stiffness characteristics of fissured clay.Resonant column tests are taken to examine the nonlinear attenuation behavior of the small-strain shear modulus(SSSM)and damping ratio of fissured clay under various DW cycle and consolidation pressure(25e200 kPa)conditions.Scanning electron microscopy(SEM)and computed tomography(CT)are employed to reveal the microstructure of fissured clay.The HardineDrnevich(H-D)model is used to describe the decay law of its SSSM,and the small strain stiffness characteristics of fissured soil are analyzed in view of damage mechanics.The results show that the SSSM of the fissured clay decreases as the DWcycles increase,with the greatest attenuation at original soil state.The damping ratio exhibits an incremental trend with escalating strain and a higher number of DW cycles.Regarding damage,DW cycles can lead to the formation of microcracks in the sample,and the aggregates disperse into smaller aggregates,which then aggregates again,resulting in structural damage.The damage variables of the samples under various confining pressures and DW cycles are analyzed based on the principle of strain damage.Finally,the volume changes and the distribution of different pore sizes obtained through CT are analyzed to investigate the stiffness attenuation under DW cycles.Additionally,the study examines the propagation direction of secondary cracks induced by primary fissures,which will play an important role in reduction of the stiffness.Our investigations contribute to understanding of soil mechanics and practical applications in areas where fissured clay is prevalent.展开更多
Numerous slope failures have been reported during periods of water level fluctuations.Understanding the influence of water on the creep behavior of joints is essential for evaluating the long-term stability of slopes....Numerous slope failures have been reported during periods of water level fluctuations.Understanding the influence of water on the creep behavior of joints is essential for evaluating the long-term stability of slopes.This study focuses on the effects of drying-wetting cycles and soaking conditions on the long-term behavior of sandstone joints.A total of 12 multi-stage shear creep tests are carried out on sandstone joints subjected to varying drying-wetting cycles under both soaking and un-soaking conditions.Based on the experimental results,the influences of drying-wetting cycles as well as soaking conditions on the microstructure,shear creep displacement,strength,and failure morphologies of sandstone joints are investigated comprehensively.Results indicate that increasing drying-wetting cycles not only yields larger shear creep displacements but also leads to a negative exponential decrease in the strength of sandstone joints.Besides,soaking conditions strongly influence the creep behavior of sandstone joints.The failure strength and long-term strength of sandstone joints for soaked samples decrease by 13.6%–29.0%and 19.4%–37.5%,respectively,as compared to unsoaked samples.Furthermore,four distinct stages in the shear creep process were identified according to the results obtained from multi-stage shear creep tests and computerized tomography scans,and three creep failure modes of sandstone joints are thus determined.Finally,the influence mechanism of drying-wetting cycles and soaking conditions on the creep failure modes of sandstone joints is revealed.Drying-wetting cycles and soaking conditions diminish the influence of asperities on the shear creep behavior of joints,thereby reducing the resistance of joints to long-term deformation.展开更多
The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analy...The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.展开更多
Enzyme-induced carbonate precipitation(EICP)is an emanating,eco-friendly and potentially sound technique that has presented promise in various geotechnical applications.However,the durability and microscopic character...Enzyme-induced carbonate precipitation(EICP)is an emanating,eco-friendly and potentially sound technique that has presented promise in various geotechnical applications.However,the durability and microscopic characteristics of EICP-treated specimens against the impact of drying-wetting(D-W)cycles is under-explored yet.This study investigates the evolution of mechanical behavior and pore charac-teristics of EICP-treated sea sand subjected to D-W cycles.The uniaxial compressive strength(UCS)tests,synchrotron radiation micro-computed tomography(micro-CT),and three-dimensional(3D)recon-struction of CT images were performed to study the multiscale evolution characteristics of EICP-reinforced sea sand under the effect of D-W cycles.The potential correlations between microstructure characteristics and macro-mechanical property deterioration were investigated using gray relational analysis(GRA).Results showed that the UCS of EICP-treated specimens decreases by 63.7% after 15 D-W cycles.The proportion of mesopores gradually decreases whereas the proportion of macropores in-creases due to the exfoliated calcium carbonate with increasing number of D-W cycles.The micro-structure in EICP-reinforced sea sand was gradually disintegrated,resulting in increasing pore size and development of pore shape from ellipsoidal to columnar and branched.The gray relational degree suggested that the weight loss rate and UCS deterioration were attributed to the development of branched pores with a size of 100-1000 m m under the action of D-W cycles.Overall,the results in this study provide a useful guidancee for the long-term stability and evolution characteristics of EICP-reinforced sea sand under D-W weathering conditions.展开更多
Based on the drying-wetting cycles experiment and the carbonation-drying-wetting cycles experiment for coral aggregate seawater concrete(CASC)with different strength grades,the effects of carbonation-drying-wetting on...Based on the drying-wetting cycles experiment and the carbonation-drying-wetting cycles experiment for coral aggregate seawater concrete(CASC)with different strength grades,the effects of carbonation-drying-wetting on the durability of CASC are studied with the surface state,mass loss rate,relative dynamic elastic modulus,ultrasonic wave velocity and cube compressive strength as indices.Results show that the mass loss rate of CASC increases gradually with the increase in cycle times in the drying-wetting and carbonation-drying-wetting cycles.The mass loss rate increases relatively slowly at the initial stage but it increases remarkably after 10 cycles.The relative dynamic elastic modulus and ultrasonic wave velocity decrease gradually with the increase in cycle times.After 6 cycles,the decrease rate of the relative dynamic elastic modulus and ultrasonic wave velocity of CASC tends to be flat and the surface is slightly damaged.Compared with the initial 28 d cube compressive strength,the cube compressive strength of CASC decreases by 8.8%to 11.0%.Drying-wetting cycles and carbonation can accelerate seawater erosion on CASC,and drying-wetting cycles result in salting-out and accelerate the destruction of concrete.Therefore,the carbonation-drying-wetting accelerates the destruction of CASC.展开更多
Based on seawater immersion,drying-wetting cycles,carbonation and drying-wetting cycles for coral aggregate sea-water concrete(CASC)with different strength grades,the effect of carbonation and drying-wetting cycles on...Based on seawater immersion,drying-wetting cycles,carbonation and drying-wetting cycles for coral aggregate sea-water concrete(CASC)with different strength grades,the effect of carbonation and drying-wetting cycles on chloride diffusion be-havior of CASC is studied.The results show that the free surface chloride concentration(Cs),free chloride diffusion coefficient(Df)and time-dependent index(m)of CASC in the drying-wetting cycles is obviously higher than that in seawater immersion.The Df and m of CASC of carbonation and drying-wetting cycles is higher than that in the drying-wetting cycles.Carbonation increases the Df and m of CASC,which is against CASC to resist chloride corrosion.The corrosion possibility of CASC structures in different ex-posed areas is as follows:splash zone(carbonation and drying-wetting cycles)>tidal zone(drying-wetting cycles)>underwater zone(seawater immersion).Besides,the chloride diffusion rate of C65-CASC is 17.8%-63.4%higher than that of C65-ordinary aggre-gate concrete(OAC)in seawater immersion(underwater zone).Therefore,anti-corrosion measures should be adopted to improve the service life of CASC structure in the oceanic environment.展开更多
Cracks resulting from cyclic wetting and drying of expansive soils create discontinuities and anisotropy in the soil.The representative elementary volume(REV)defined by the continuous-media theory cannot be applied to...Cracks resulting from cyclic wetting and drying of expansive soils create discontinuities and anisotropy in the soil.The representative elementary volume(REV)defined by the continuous-media theory cannot be applied to cracked expansive soils that are considered discontinuous media.In this study,direct shear tests of three different scales(30 cm^(2),900 cm^(2),1963 cm^(2))and crack image analysis were carried out on undisturbed soil samples subjected to drying-wetting cycles in-situ.The REV size of expansive soil was investigated using the crack intensity factor(CIF)and soil cohesion.The results show that soil cohesion decreased with increasing sample area,and the development of secondary cracks further exacerbated the size effect of sample on cohesion of the soil.As shrinkage cracks developed,the REV size of the soil gradually increased and plateaued after 3−5 cycles.Under the same drying-wetting cycle conditions,the REV size determined using soil cohesion(REV-C)is 1.75 to 2.97 times the REV size determined using CIF(REV-CIF).Under the influence of shrinkage cracks,the average CIF is positively correlated with the REV size determined using different maximum permissible errors,with the coefficient of correlation greater than 0.9.A method for determining the REV-C based on crack image analysis is proposed,and the REV-C of expansive soil in the study area under different exposure times is given.展开更多
The chloride ion transmission model considering diffusion and convection was established respectively for different zones in concrete by analyzing chloride ion transmission mechanism under the dryingwetting cycles. Th...The chloride ion transmission model considering diffusion and convection was established respectively for different zones in concrete by analyzing chloride ion transmission mechanism under the dryingwetting cycles. The finite difference method was adopted to solve the model. The equation of chloride ion transmission model in the convection and diffusion zone of concrete was discreted by the group explicit scheme with right single point （GER method） and the equation in diffusion zone was discreted by FTCS difference scheme. According to relative humidity characteristics in concrete under drying-wetting cycles, the seepage velocity equation was formulated based on Kelvin Equation and Darcy＇s Law. The time-variant equations of chloride ion concentration of concrete surface and the boundary surface of the convection and diffusion zone were established. Based on the software MATLAB the numerical calculation was carried out by using the model and basic material parameters from the experiments. The calculation of chloride ion concentration distribution in concrete is in good agreement with the drying-wetting cycles experiments. It can be shown that the chloride ion transmission model and the seepage velocity equation are reasonable and practical. Studies have shown that the chloride ion transmission in concrete considering convection and diffusion under the drying-wetting cycles is the better correlation with the actual situation than that only considering the diffusion.展开更多
Enzyme-induced carbonate precipitation(EICP)has emerged promising in various geotechnical applications,and has been presented as an alternative to the traditional cementitious materials-based ground improvement method...Enzyme-induced carbonate precipitation(EICP)has emerged promising in various geotechnical applications,and has been presented as an alternative to the traditional cementitious materials-based ground improvement method.However,the study on mechanical properties and disintegration behavior of EICP-reinforced sea sand subjected to drying-wetting cycles are limited.This study investigated the mechanical properties and disintegration behavior of EICP-reinforced sea sand against the impact of drying-wetting(D-W)cycles.The uniaxial compressive strength(UCS)tests were performed to discuss the effect of drying-wetting cycles on the mechanical behavior of EICP-treated sea sand.The disintegration tests were conducted on EICP-treated sea sand to investigate the disintegration resistance of bio-cemented samples with various cementation levels.The microstructures of samples before and after disintegration were examined to disclose the disintegration mechanisms of EICP-reinforced sea sand.D-W cycles significantly affect the mechanical properties of EICP-reinforced sea sand,with UCS decreasing by 63.7%after undergoing 15 D-W cycles.The disintegration resistance index of specimens with a lower cementation level decreases significantly under the effect of D-W treatment.The higher disintegration resistance of specimens with higher cementation can be attributed to more crystals with better crystallinity formed in the contact point between sand particles within specimen.The crystals formed by soybean husk urease are mainly calcite and the crystallinity of spherical calcites would gradually change into larger rhombic calcite with further bio-grouting.The crystal with poor crystallinity is susceptible to the effect of D-W treatment,resulting in the obvious disintegration of EICP-reinforced sea sand.Overall,this study is expected to provide useful guidance on the long-term stability and drying-wetting disintegration mechanisms of EICP-reinforced sea sand.展开更多
Microbial-induced carbonate precipitation(MICP)technique has been adopted in geotechnical engineering widely.In this study,the effect of drying-wetting cycles on MICP-recycled shredded coconut coir(RSC)reinforced calc...Microbial-induced carbonate precipitation(MICP)technique has been adopted in geotechnical engineering widely.In this study,the effect of drying-wetting cycles on MICP-recycled shredded coconut coir(RSC)reinforced calcareous sand was studied,and the deterioration mechanism under drying-wetting cycles was revealed.Test results indicated that drying-wetting cycles exert an important influence on the durability of MICP-RSC reinforced specimens.With the increase of drying-wetting cycles N,the specimens demonstrated significant increase in mass loss rate and critical void ratio,decrease in maximum shear modulus,peak strength and toughness.Furthermore,an increase in the initial relative density reduced the deterioration of MICP-RSC reinforced specimens exposed to drying-wetting cycles.Higher initial relative density of the specimen correlates with an increased maximum shear modulus,peak stress and toughness,a decreased in permeability and critical void ratio.Microanalysis revealed that the generated calcium carbonate adhering to sand particles and RSC gradually dropped off with the increase of N,weakened cementation,and led to the deterioration of MICP-RSC reinforced specimens,which is consistent with the deterioration characteristics under drying-wetting cycles.展开更多
The influential depth of moisture transport in a concrete surface subject to drying-wetting cycles was analyzed numerically. The moisture transport was described by a diffusion model with different diffusivities for d...The influential depth of moisture transport in a concrete surface subject to drying-wetting cycles was analyzed numerically. The moisture transport was described by a diffusion model with different diffusivities for drying and wetting. A finite difference scheme was developed to solve the partial differential equations The influential depth was then investigated numerically for initially saturated and unsaturated concretes exposed to drying-wetting actions in marine environments using an equilibrium time ratio concept. The equilibrium time ratio was calculated numerically for a saturated condition and the moisture influential depth is shown to be a linear function of the square root of the drying time. However, this equilibrium time ratio does not exist for an unsaturated condition and the moisture influential depth depends on the initial saturation as well as the drying-wetting time ratio. The results indicate that this model gives more realistic predictions of moisture transport of in situ structural concrete and its durability.展开更多
Evaluating the impacts of drying-wetting(DW)cycles on soil aggregates and their associated organic carbon(OC)and nitrogen(N)is crucial to understand the OC and N cycles.Soils are likely subjected to DW cycles with dif...Evaluating the impacts of drying-wetting(DW)cycles on soil aggregates and their associated organic carbon(OC)and nitrogen(N)is crucial to understand the OC and N cycles.Soils are likely subjected to DW cycles with different sequences depending on seasons or in agroecosystems.However,studies on how DW sequences influence OC and N dynamics within aggregates,and whether this effect is dependent on soil type,are relatively limited.Herein,two DW sequences,i.e.,drying-wetting-dryingwetting(2DW)and wetting-drying-wetting-drying(2WD)treatments were designed,and a consistent wetting(CW)was set as a control to assess the effects of DW sequences.Four soils(Entisol,Ultisol,Anthrosol and Mollisol)varying in texture and OC content were used.The aggregate size distribution,the OC,total N(TN),readily oxidizable OC(ROOC)and mineral N(Min-N)content in aggregates were determined.Results showed that 2DW treatment increased but 2WD treatment decreased the large aggregates of Entisol and Ultisol,while 2DW and 2WD treatments synchronously increased the large aggregates of Anthrosol but decreased them of Mollisol.Two DW treatments increased the OC in each aggregate of Entisol,Anthrosol and Mollisol but decreased them of Ultisol.The 2DW didn't affect but 2WD treatment decreased ROOC in 1e2 mm aggregates of Entisol and<0.25 mm aggregates of Ultisol and Mollisol.The 2DW and 2WD treatments minimally affected TN but potentially influenced Min-N in aggregates.The 2DW and 2WD treatments both decreased the Min-N in each aggregate size class of Entisol and Mollisol,while 2DW increased but 2WD treatment decreased Min-N in each aggregate of Ultisol and Anthrosol.These results indicated that the varied effects of DW sequences and the interactive effects of soil type with DW sequences on aggregate turnover and OC and N cycling should be reconsidered to provide more precisive evidences for global C and N cycles under the scenario of future climate changes.展开更多
Water level fluctuations in the reservoir deteriorate soils and rocks on the bank landslides by drying-wetting(D-W)cycles,which results in a significant decrease in mechanical properties.A comprehensive understanding ...Water level fluctuations in the reservoir deteriorate soils and rocks on the bank landslides by drying-wetting(D-W)cycles,which results in a significant decrease in mechanical properties.A comprehensive understanding of deterioration mechanism of sliding-zone soils is of great significance for interpreting the deformation behavior of landslides.However,quantitative investigation on the deterioration characteristics of soils considering the structural evolution under D-W cycles is still limited.Here,we carry out a series of laboratory tests to characterize the multi-scale deterioration of sliding-zone soils and reveal the mechanism of shear strength decay under D-W cycles.Firstly,we describe the micropores into five grades by scanning electron microscope and observe a critical change in porosity after the first three cycles.We categorize the mesoscale cracks into five classes using digital photography and observe a stepwise increase in crack area ratio.Secondly,we propose a shear strength decay model based on fractal theory which is verified by the results of consolidated undrained triaxial tests.Cohesion and friction angle of sliding-zone soils are found to show different decay patterns resulting from the staged evolution of structure.Then,structural deterioration processes including cementation destruction,pores expansion,aggregations decomposition,and clusters assembly are considered to occur to decay the shear strength differently.Finally,a three-stage deterioration mechanism associated with four structural deterioration processes is revealed,which helps to better interpret the intrinsic mechanism of shear strength decay.These findings provide the theoretical basis for the further accurate evaluation of reservoir landslides stability under water level fluctuations.展开更多
Soil drying and wetting impose significant influences on soil nitrogen (N) dynamics and microbial communities. However, effects of drying-wetting cycles, while common in vegetable soils, especially under greenhouse co...Soil drying and wetting impose significant influences on soil nitrogen (N) dynamics and microbial communities. However, effects of drying-wetting cycles, while common in vegetable soils, especially under greenhouse conditions, have not been well studied. In this study, two greenhouse vegetable soils, which were collected from Xinji (XJ) and Hangzhou (HZ), China, were maintained at 30% and 75% water-holding capacity (WHC), or five cycles of 75% WHC followed by a 7-day dry-down to 30% WHC (DW). Soil inorganic N content increased during incubation. Net N mineralization (Nmin), microbial activity, and microbial biomass were significantly higher in the DW treatment than in the 30% and 75% WHC treatments. The higher water content (75% WHC) treatment had higher Nmin, microbial activity, and microbial biomass than the lower water content treatment (30% WHC). Multivariate analyses of community-level physiological profile (CLPP) and phospholipid fatty acid (PLFA) data indicated that soil moisture regime had a significant effect on soil microbial community substrate utilization pattern and microbial community composition. The significant positive correlation between Nmin and microbial substrate utilization or PLFAs suggested that soil N mineralization had a close relationship with microbial community.展开更多
Several different experiments,including freezing-thawing,freezing-thawing+drying-wetting,and drying-wetting,in salt solution and in water respectively,were designed to determine the durability of concrete.The durabili...Several different experiments,including freezing-thawing,freezing-thawing+drying-wetting,and drying-wetting,in salt solution and in water respectively,were designed to determine the durability of concrete.The durability damage features of concrete in the above experiments were studied.It is demonstrated that the damage extent of concrete under freezing-thawing and freezing-thawing+drying-wetting in salt solution is larger than that in water.Thus,freezing-thawing and freezing-thawing+drying-wetting in salt solution are stricter and more effective methods to evaluate the durability of concrete in salt-existing environment in cold regions.The damage extent of concrete under freezing-thawing+drying-wetting shows an ultra-superposition effect.The order of concrete durability deterioration degree in these experiments is determined.It shows that effects of multi-damage factors are greater than those of single-damage factor.展开更多
The damage process of concrete exposed to sodium sulfate attack and drying-wetting cycles was investigated. The water to binder(W/B) ratio and the concentration of sulfate solution were taken as variable parameters. T...The damage process of concrete exposed to sodium sulfate attack and drying-wetting cycles was investigated. The water to binder(W/B) ratio and the concentration of sulfate solution were taken as variable parameters. Through the experiment, visual change, relative dynamic modulus of elasticity(RDME) and the surface damage layer thickness of concrete were measured.Furthermore, SEM and thermal analysis were used to investigate the changing of microstructure and corrosion products of concrete.The test results show that the ultrasonic velocity is related to the damage layer of concrete. It approves that an increase in damage layer thickness reduces the compactness and the ultrasonic velocity. The deterioration degree of concrete could be estimated effectively by measuring the surface damage layer and the RDME of concrete. It is also found that the content of gypsum in concrete is less than that of ettringite in test, and some gypsum is checked only after a certain corrosion extent. When the concrete is with high W/B ratio or exposed to high concentration of sulfate solution, the content of ettringite first increases and then decreases with corrosion time. However, the content of gypsum increases at a steady rate. The content of corrosion products does not correspond well with the observations of RDME change, and extensive amount of corrosion products can be formed before obvious damage occurs.展开更多
The purpose of this paper was using gold mine tailings and cemented materials with low alkalinity to fabricate baking-free bricks.The obtained baking-free brick samples were evaluated by unconfined compressive strengt...The purpose of this paper was using gold mine tailings and cemented materials with low alkalinity to fabricate baking-free bricks.The obtained baking-free brick samples were evaluated by unconfined compressive strength(UCS),water absorption percentage,freezing-thawing cycle,and drying-wetting cycle.The microstructures of the baking-free brick samples were analyzed using X-ray diffraction(XRD)and scanning electron microscope(SEM)techniques.The baking-free brick specimens cured for 28 days with the addition of 10%mixing water consumption and 1:6 cement/tailing ratio tended to obtain favorable comprehensive properties such as a high compressive strength of 15.15 MPa,a low water absorption percentage of 11.8%,excellent freezing-thawing resistance with a 8.9%UCS loss rate after 15 freezing-thawing cycles and good drying-wetting resistance with a 11%UCS loss rate after 10 drying-wetting cycles.The XRD and SEM test results verified that different kinds of hydrate products including C-S-H and C-S-A-H gels,and ettringite were produced during hydration process,which were responsible for good physical,mechanical properties,and durability of the obtained baking-free bricks.Therefore,the experimental results showed that it was practical and reasonable to utilize the homemade cementitious materials in our laboratory to stabilize the gold tailings for production of baking-free bricks,which still met the requirements of major regional construction standards in some countries.展开更多
基金the financial support of the National Key Research and Development Program of China(Grant No.2019YFC1509901).
文摘Fissured clays exhibit unique geotechnical behaviors,with the stiffness characteristics evolving dynamically in response to environmental changes.To address this issue,reported here is a systematic assessment of how dryingewetting(DW)cycles affect the small-strain stiffness characteristics of fissured clay.Resonant column tests are taken to examine the nonlinear attenuation behavior of the small-strain shear modulus(SSSM)and damping ratio of fissured clay under various DW cycle and consolidation pressure(25e200 kPa)conditions.Scanning electron microscopy(SEM)and computed tomography(CT)are employed to reveal the microstructure of fissured clay.The HardineDrnevich(H-D)model is used to describe the decay law of its SSSM,and the small strain stiffness characteristics of fissured soil are analyzed in view of damage mechanics.The results show that the SSSM of the fissured clay decreases as the DWcycles increase,with the greatest attenuation at original soil state.The damping ratio exhibits an incremental trend with escalating strain and a higher number of DW cycles.Regarding damage,DW cycles can lead to the formation of microcracks in the sample,and the aggregates disperse into smaller aggregates,which then aggregates again,resulting in structural damage.The damage variables of the samples under various confining pressures and DW cycles are analyzed based on the principle of strain damage.Finally,the volume changes and the distribution of different pore sizes obtained through CT are analyzed to investigate the stiffness attenuation under DW cycles.Additionally,the study examines the propagation direction of secondary cracks induced by primary fissures,which will play an important role in reduction of the stiffness.Our investigations contribute to understanding of soil mechanics and practical applications in areas where fissured clay is prevalent.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52479108,52408391)the Fundamental Research Funds for the Central Universities(2042024kf0032)+1 种基金the Postdoctoral Fellowship Program(Grade C)of China Postdoctoral Science Foundation(Grant No.GZC20241283)the Natural Science Foundation of Hubei Province,China(No.2024AFB160)。
文摘Numerous slope failures have been reported during periods of water level fluctuations.Understanding the influence of water on the creep behavior of joints is essential for evaluating the long-term stability of slopes.This study focuses on the effects of drying-wetting cycles and soaking conditions on the long-term behavior of sandstone joints.A total of 12 multi-stage shear creep tests are carried out on sandstone joints subjected to varying drying-wetting cycles under both soaking and un-soaking conditions.Based on the experimental results,the influences of drying-wetting cycles as well as soaking conditions on the microstructure,shear creep displacement,strength,and failure morphologies of sandstone joints are investigated comprehensively.Results indicate that increasing drying-wetting cycles not only yields larger shear creep displacements but also leads to a negative exponential decrease in the strength of sandstone joints.Besides,soaking conditions strongly influence the creep behavior of sandstone joints.The failure strength and long-term strength of sandstone joints for soaked samples decrease by 13.6%–29.0%and 19.4%–37.5%,respectively,as compared to unsoaked samples.Furthermore,four distinct stages in the shear creep process were identified according to the results obtained from multi-stage shear creep tests and computerized tomography scans,and three creep failure modes of sandstone joints are thus determined.Finally,the influence mechanism of drying-wetting cycles and soaking conditions on the creep failure modes of sandstone joints is revealed.Drying-wetting cycles and soaking conditions diminish the influence of asperities on the shear creep behavior of joints,thereby reducing the resistance of joints to long-term deformation.
基金funded by National Key R&D Program of China(Grant No.2023YFC3007001)Beijing Natural Science Foundation(Grant No.8244053)China Postdoctoral Science Foundation(Grant No.2024M754065).
文摘The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.
基金The authors gratefully acknowledge the financial support of National NaturalScience Foundation of China(Grant No.41972276)Natural Science Foundation of Fujian Province,China(Grant No.2020J06013)"Foal Eagle Program"Youth Top-notch Talent Project of Fujian Province,China(Grant No.00387088).
文摘Enzyme-induced carbonate precipitation(EICP)is an emanating,eco-friendly and potentially sound technique that has presented promise in various geotechnical applications.However,the durability and microscopic characteristics of EICP-treated specimens against the impact of drying-wetting(D-W)cycles is under-explored yet.This study investigates the evolution of mechanical behavior and pore charac-teristics of EICP-treated sea sand subjected to D-W cycles.The uniaxial compressive strength(UCS)tests,synchrotron radiation micro-computed tomography(micro-CT),and three-dimensional(3D)recon-struction of CT images were performed to study the multiscale evolution characteristics of EICP-reinforced sea sand under the effect of D-W cycles.The potential correlations between microstructure characteristics and macro-mechanical property deterioration were investigated using gray relational analysis(GRA).Results showed that the UCS of EICP-treated specimens decreases by 63.7% after 15 D-W cycles.The proportion of mesopores gradually decreases whereas the proportion of macropores in-creases due to the exfoliated calcium carbonate with increasing number of D-W cycles.The micro-structure in EICP-reinforced sea sand was gradually disintegrated,resulting in increasing pore size and development of pore shape from ellipsoidal to columnar and branched.The gray relational degree suggested that the weight loss rate and UCS deterioration were attributed to the development of branched pores with a size of 100-1000 m m under the action of D-W cycles.Overall,the results in this study provide a useful guidancee for the long-term stability and evolution characteristics of EICP-reinforced sea sand under D-W weathering conditions.
基金The National Natural Science Foundation of China(No.11832013,51878350)the Fundamental Research Funds for the Central Universities(No.B210202023)+3 种基金the Natural Science Foundation of Jiangsu Province(No.BK20180433)the Water Resources Science and Technology Project of Jiangsu Province(No.2020017)the Basic Science Research Project of Nantong(No.JC2020120)the Key Laboratory of Coastal Disaster and Defence of Ministry of Education(Hohai University)(No.202006).
文摘Based on the drying-wetting cycles experiment and the carbonation-drying-wetting cycles experiment for coral aggregate seawater concrete(CASC)with different strength grades,the effects of carbonation-drying-wetting on the durability of CASC are studied with the surface state,mass loss rate,relative dynamic elastic modulus,ultrasonic wave velocity and cube compressive strength as indices.Results show that the mass loss rate of CASC increases gradually with the increase in cycle times in the drying-wetting and carbonation-drying-wetting cycles.The mass loss rate increases relatively slowly at the initial stage but it increases remarkably after 10 cycles.The relative dynamic elastic modulus and ultrasonic wave velocity decrease gradually with the increase in cycle times.After 6 cycles,the decrease rate of the relative dynamic elastic modulus and ultrasonic wave velocity of CASC tends to be flat and the surface is slightly damaged.Compared with the initial 28 d cube compressive strength,the cube compressive strength of CASC decreases by 8.8%to 11.0%.Drying-wetting cycles and carbonation can accelerate seawater erosion on CASC,and drying-wetting cycles result in salting-out and accelerate the destruction of concrete.Therefore,the carbonation-drying-wetting accelerates the destruction of CASC.
基金sup-ports from the National Natural Science Foundation of China(Nos.11832013 and 51878350)the Fundamental Research Funds for the Central Universities(No.B210202023)+5 种基金the Young Scientific and Technological Talents to Support Project of Jiangsu Association for Science and Technology(No.027)the Water Conservancy Science and Technology Project of Jiangsu Province(No.2020017)the Postdoctoral Research Funding Program of Ji-angsu Province(No.2021K133B)the Ningbo Science and Technology Innovation Project(No.2020Z040)the Nantong Science and Technology Plan Project(No.JC 2020120)the Open Research Fund of Changjiang River Research Institute of Changjiang Water Resources Com-mittee(No.CKWV2021879/KY).
文摘Based on seawater immersion,drying-wetting cycles,carbonation and drying-wetting cycles for coral aggregate sea-water concrete(CASC)with different strength grades,the effect of carbonation and drying-wetting cycles on chloride diffusion be-havior of CASC is studied.The results show that the free surface chloride concentration(Cs),free chloride diffusion coefficient(Df)and time-dependent index(m)of CASC in the drying-wetting cycles is obviously higher than that in seawater immersion.The Df and m of CASC of carbonation and drying-wetting cycles is higher than that in the drying-wetting cycles.Carbonation increases the Df and m of CASC,which is against CASC to resist chloride corrosion.The corrosion possibility of CASC structures in different ex-posed areas is as follows:splash zone(carbonation and drying-wetting cycles)>tidal zone(drying-wetting cycles)>underwater zone(seawater immersion).Besides,the chloride diffusion rate of C65-CASC is 17.8%-63.4%higher than that of C65-ordinary aggre-gate concrete(OAC)in seawater immersion(underwater zone).Therefore,anti-corrosion measures should be adopted to improve the service life of CASC structure in the oceanic environment.
基金Project(41472240)supported by the National Natural Science Foundation of ChinaProjects(2015B25514,2015B17214)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Cracks resulting from cyclic wetting and drying of expansive soils create discontinuities and anisotropy in the soil.The representative elementary volume(REV)defined by the continuous-media theory cannot be applied to cracked expansive soils that are considered discontinuous media.In this study,direct shear tests of three different scales(30 cm^(2),900 cm^(2),1963 cm^(2))and crack image analysis were carried out on undisturbed soil samples subjected to drying-wetting cycles in-situ.The REV size of expansive soil was investigated using the crack intensity factor(CIF)and soil cohesion.The results show that soil cohesion decreased with increasing sample area,and the development of secondary cracks further exacerbated the size effect of sample on cohesion of the soil.As shrinkage cracks developed,the REV size of the soil gradually increased and plateaued after 3−5 cycles.Under the same drying-wetting cycle conditions,the REV size determined using soil cohesion(REV-C)is 1.75 to 2.97 times the REV size determined using CIF(REV-CIF).Under the influence of shrinkage cracks,the average CIF is positively correlated with the REV size determined using different maximum permissible errors,with the coefficient of correlation greater than 0.9.A method for determining the REV-C based on crack image analysis is proposed,and the REV-C of expansive soil in the study area under different exposure times is given.
基金Funded by the National Natural Science Foundation of China(Nos.51278495,51174291)the Open Fund of Nation Engineering Laboratory for High Speed Railway Construction(No.HSR2013011)
文摘The chloride ion transmission model considering diffusion and convection was established respectively for different zones in concrete by analyzing chloride ion transmission mechanism under the dryingwetting cycles. The finite difference method was adopted to solve the model. The equation of chloride ion transmission model in the convection and diffusion zone of concrete was discreted by the group explicit scheme with right single point （GER method） and the equation in diffusion zone was discreted by FTCS difference scheme. According to relative humidity characteristics in concrete under drying-wetting cycles, the seepage velocity equation was formulated based on Kelvin Equation and Darcy＇s Law. The time-variant equations of chloride ion concentration of concrete surface and the boundary surface of the convection and diffusion zone were established. Based on the software MATLAB the numerical calculation was carried out by using the model and basic material parameters from the experiments. The calculation of chloride ion concentration distribution in concrete is in good agreement with the drying-wetting cycles experiments. It can be shown that the chloride ion transmission model and the seepage velocity equation are reasonable and practical. Studies have shown that the chloride ion transmission in concrete considering convection and diffusion under the drying-wetting cycles is the better correlation with the actual situation than that only considering the diffusion.
基金support of National Natural Science Foundation of China(Grant nos.41972276,52108307)"Foal Eagle Program"Youth Top-notch Talent Project of Fujian Province(Grant no.00387088)+1 种基金Natural Science Foundation of Fujian Province(Grant no.2020J06013)Qishan Scholar Project of Fuzhou University(Grant nos.XRC-22015,GXRC21047).
文摘Enzyme-induced carbonate precipitation(EICP)has emerged promising in various geotechnical applications,and has been presented as an alternative to the traditional cementitious materials-based ground improvement method.However,the study on mechanical properties and disintegration behavior of EICP-reinforced sea sand subjected to drying-wetting cycles are limited.This study investigated the mechanical properties and disintegration behavior of EICP-reinforced sea sand against the impact of drying-wetting(D-W)cycles.The uniaxial compressive strength(UCS)tests were performed to discuss the effect of drying-wetting cycles on the mechanical behavior of EICP-treated sea sand.The disintegration tests were conducted on EICP-treated sea sand to investigate the disintegration resistance of bio-cemented samples with various cementation levels.The microstructures of samples before and after disintegration were examined to disclose the disintegration mechanisms of EICP-reinforced sea sand.D-W cycles significantly affect the mechanical properties of EICP-reinforced sea sand,with UCS decreasing by 63.7%after undergoing 15 D-W cycles.The disintegration resistance index of specimens with a lower cementation level decreases significantly under the effect of D-W treatment.The higher disintegration resistance of specimens with higher cementation can be attributed to more crystals with better crystallinity formed in the contact point between sand particles within specimen.The crystals formed by soybean husk urease are mainly calcite and the crystallinity of spherical calcites would gradually change into larger rhombic calcite with further bio-grouting.The crystal with poor crystallinity is susceptible to the effect of D-W treatment,resulting in the obvious disintegration of EICP-reinforced sea sand.Overall,this study is expected to provide useful guidance on the long-term stability and drying-wetting disintegration mechanisms of EICP-reinforced sea sand.
基金support from the National Natural Science Foundations of China(No.52171282,41831280)Shandong Provincial Key Research and Development Plan,China(No.2021ZLGX04)supported by Taishan Scholars of Shandong Province,China(No.tsqn202306098).
文摘Microbial-induced carbonate precipitation(MICP)technique has been adopted in geotechnical engineering widely.In this study,the effect of drying-wetting cycles on MICP-recycled shredded coconut coir(RSC)reinforced calcareous sand was studied,and the deterioration mechanism under drying-wetting cycles was revealed.Test results indicated that drying-wetting cycles exert an important influence on the durability of MICP-RSC reinforced specimens.With the increase of drying-wetting cycles N,the specimens demonstrated significant increase in mass loss rate and critical void ratio,decrease in maximum shear modulus,peak strength and toughness.Furthermore,an increase in the initial relative density reduced the deterioration of MICP-RSC reinforced specimens exposed to drying-wetting cycles.Higher initial relative density of the specimen correlates with an increased maximum shear modulus,peak stress and toughness,a decreased in permeability and critical void ratio.Microanalysis revealed that the generated calcium carbonate adhering to sand particles and RSC gradually dropped off with the increase of N,weakened cementation,and led to the deterioration of MICP-RSC reinforced specimens,which is consistent with the deterioration characteristics under drying-wetting cycles.
基金the National Natural Science Foundation of China (No. 50538060)
文摘The influential depth of moisture transport in a concrete surface subject to drying-wetting cycles was analyzed numerically. The moisture transport was described by a diffusion model with different diffusivities for drying and wetting. A finite difference scheme was developed to solve the partial differential equations The influential depth was then investigated numerically for initially saturated and unsaturated concretes exposed to drying-wetting actions in marine environments using an equilibrium time ratio concept. The equilibrium time ratio was calculated numerically for a saturated condition and the moisture influential depth is shown to be a linear function of the square root of the drying time. However, this equilibrium time ratio does not exist for an unsaturated condition and the moisture influential depth depends on the initial saturation as well as the drying-wetting time ratio. The results indicate that this model gives more realistic predictions of moisture transport of in situ structural concrete and its durability.
基金funded by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA23070200 and XDB40000000)the National Natural Science Foundation of China(41622105 and 41977068)programs from Chinese Academy of Sciences(QYZDB-SSW-DQC039).
文摘Evaluating the impacts of drying-wetting(DW)cycles on soil aggregates and their associated organic carbon(OC)and nitrogen(N)is crucial to understand the OC and N cycles.Soils are likely subjected to DW cycles with different sequences depending on seasons or in agroecosystems.However,studies on how DW sequences influence OC and N dynamics within aggregates,and whether this effect is dependent on soil type,are relatively limited.Herein,two DW sequences,i.e.,drying-wetting-dryingwetting(2DW)and wetting-drying-wetting-drying(2WD)treatments were designed,and a consistent wetting(CW)was set as a control to assess the effects of DW sequences.Four soils(Entisol,Ultisol,Anthrosol and Mollisol)varying in texture and OC content were used.The aggregate size distribution,the OC,total N(TN),readily oxidizable OC(ROOC)and mineral N(Min-N)content in aggregates were determined.Results showed that 2DW treatment increased but 2WD treatment decreased the large aggregates of Entisol and Ultisol,while 2DW and 2WD treatments synchronously increased the large aggregates of Anthrosol but decreased them of Mollisol.Two DW treatments increased the OC in each aggregate of Entisol,Anthrosol and Mollisol but decreased them of Ultisol.The 2DW didn't affect but 2WD treatment decreased ROOC in 1e2 mm aggregates of Entisol and<0.25 mm aggregates of Ultisol and Mollisol.The 2DW and 2WD treatments minimally affected TN but potentially influenced Min-N in aggregates.The 2DW and 2WD treatments both decreased the Min-N in each aggregate size class of Entisol and Mollisol,while 2DW increased but 2WD treatment decreased Min-N in each aggregate of Ultisol and Anthrosol.These results indicated that the varied effects of DW sequences and the interactive effects of soil type with DW sequences on aggregate turnover and OC and N cycling should be reconsidered to provide more precisive evidences for global C and N cycles under the scenario of future climate changes.
基金funding support from the NSFC Key Projects of International Cooperation and Exchanges (Grant No.42020104006)the National Key Research and Development Program of China (Grant No.2023YFC3007001)the National Natural Science Foundation of China (Grant No.42307227).
文摘Water level fluctuations in the reservoir deteriorate soils and rocks on the bank landslides by drying-wetting(D-W)cycles,which results in a significant decrease in mechanical properties.A comprehensive understanding of deterioration mechanism of sliding-zone soils is of great significance for interpreting the deformation behavior of landslides.However,quantitative investigation on the deterioration characteristics of soils considering the structural evolution under D-W cycles is still limited.Here,we carry out a series of laboratory tests to characterize the multi-scale deterioration of sliding-zone soils and reveal the mechanism of shear strength decay under D-W cycles.Firstly,we describe the micropores into five grades by scanning electron microscope and observe a critical change in porosity after the first three cycles.We categorize the mesoscale cracks into five classes using digital photography and observe a stepwise increase in crack area ratio.Secondly,we propose a shear strength decay model based on fractal theory which is verified by the results of consolidated undrained triaxial tests.Cohesion and friction angle of sliding-zone soils are found to show different decay patterns resulting from the staged evolution of structure.Then,structural deterioration processes including cementation destruction,pores expansion,aggregations decomposition,and clusters assembly are considered to occur to decay the shear strength differently.Finally,a three-stage deterioration mechanism associated with four structural deterioration processes is revealed,which helps to better interpret the intrinsic mechanism of shear strength decay.These findings provide the theoretical basis for the further accurate evaluation of reservoir landslides stability under water level fluctuations.
基金Supported by the State Key Laboratory of Soil and Sustainable Agriculture, Chinathe National Basic Research Program (973 Program) of China (No. 2007CB109305)+1 种基金the National Natural Science Foundation of China (Nos. 30971859 and 30370840)the International Plant Nutrition Institute (IPNI), USA
文摘Soil drying and wetting impose significant influences on soil nitrogen (N) dynamics and microbial communities. However, effects of drying-wetting cycles, while common in vegetable soils, especially under greenhouse conditions, have not been well studied. In this study, two greenhouse vegetable soils, which were collected from Xinji (XJ) and Hangzhou (HZ), China, were maintained at 30% and 75% water-holding capacity (WHC), or five cycles of 75% WHC followed by a 7-day dry-down to 30% WHC (DW). Soil inorganic N content increased during incubation. Net N mineralization (Nmin), microbial activity, and microbial biomass were significantly higher in the DW treatment than in the 30% and 75% WHC treatments. The higher water content (75% WHC) treatment had higher Nmin, microbial activity, and microbial biomass than the lower water content treatment (30% WHC). Multivariate analyses of community-level physiological profile (CLPP) and phospholipid fatty acid (PLFA) data indicated that soil moisture regime had a significant effect on soil microbial community substrate utilization pattern and microbial community composition. The significant positive correlation between Nmin and microbial substrate utilization or PLFAs suggested that soil N mineralization had a close relationship with microbial community.
文摘Several different experiments,including freezing-thawing,freezing-thawing+drying-wetting,and drying-wetting,in salt solution and in water respectively,were designed to determine the durability of concrete.The durability damage features of concrete in the above experiments were studied.It is demonstrated that the damage extent of concrete under freezing-thawing and freezing-thawing+drying-wetting in salt solution is larger than that in water.Thus,freezing-thawing and freezing-thawing+drying-wetting in salt solution are stricter and more effective methods to evaluate the durability of concrete in salt-existing environment in cold regions.The damage extent of concrete under freezing-thawing+drying-wetting shows an ultra-superposition effect.The order of concrete durability deterioration degree in these experiments is determined.It shows that effects of multi-damage factors are greater than those of single-damage factor.
基金Project(51278403)supported by the National Natural Science Foundation of China
文摘The damage process of concrete exposed to sodium sulfate attack and drying-wetting cycles was investigated. The water to binder(W/B) ratio and the concentration of sulfate solution were taken as variable parameters. Through the experiment, visual change, relative dynamic modulus of elasticity(RDME) and the surface damage layer thickness of concrete were measured.Furthermore, SEM and thermal analysis were used to investigate the changing of microstructure and corrosion products of concrete.The test results show that the ultrasonic velocity is related to the damage layer of concrete. It approves that an increase in damage layer thickness reduces the compactness and the ultrasonic velocity. The deterioration degree of concrete could be estimated effectively by measuring the surface damage layer and the RDME of concrete. It is also found that the content of gypsum in concrete is less than that of ettringite in test, and some gypsum is checked only after a certain corrosion extent. When the concrete is with high W/B ratio or exposed to high concentration of sulfate solution, the content of ettringite first increases and then decreases with corrosion time. However, the content of gypsum increases at a steady rate. The content of corrosion products does not correspond well with the observations of RDME change, and extensive amount of corrosion products can be formed before obvious damage occurs.
基金the Key Research and Development Program of Anhui Province(No.202004a07020039).
文摘The purpose of this paper was using gold mine tailings and cemented materials with low alkalinity to fabricate baking-free bricks.The obtained baking-free brick samples were evaluated by unconfined compressive strength(UCS),water absorption percentage,freezing-thawing cycle,and drying-wetting cycle.The microstructures of the baking-free brick samples were analyzed using X-ray diffraction(XRD)and scanning electron microscope(SEM)techniques.The baking-free brick specimens cured for 28 days with the addition of 10%mixing water consumption and 1:6 cement/tailing ratio tended to obtain favorable comprehensive properties such as a high compressive strength of 15.15 MPa,a low water absorption percentage of 11.8%,excellent freezing-thawing resistance with a 8.9%UCS loss rate after 15 freezing-thawing cycles and good drying-wetting resistance with a 11%UCS loss rate after 10 drying-wetting cycles.The XRD and SEM test results verified that different kinds of hydrate products including C-S-H and C-S-A-H gels,and ettringite were produced during hydration process,which were responsible for good physical,mechanical properties,and durability of the obtained baking-free bricks.Therefore,the experimental results showed that it was practical and reasonable to utilize the homemade cementitious materials in our laboratory to stabilize the gold tailings for production of baking-free bricks,which still met the requirements of major regional construction standards in some countries.
