Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
The effect of temperature on molten zone length was investigated through simulation to optimize the control of molten zone length during the experimental process. The temperature gradient distribution within the molte...The effect of temperature on molten zone length was investigated through simulation to optimize the control of molten zone length during the experimental process. The temperature gradient distribution within the molten zone during zone refining was simulated using COMSOL Multiphysics software and experimentally validated. The simulated molten zone length showed good agreement with the actual measured length. The experimental study of tellurium purification by zone refining was conducted under the following conditions: three passes of zone refining, a hydrogen flow rate of 0.5 L/min, and molten zone movement speeds of 0.5 and 1.0 mm/min. The results demonstrated that the removal efficiencies of impurities such as Ca and Cu exceeded 95%, while the removal efficiency of phosphorus (P) reached over 70%. And the purity of tellurium reached 6N.展开更多
The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the clou...The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the cloud-aerosol continuum.This study assesses the global distribution of TZ conditions, analyzes its optical characteristics, and determines the cloud or aerosol types most commonly associated with them, using the cloud-aerosol discrimination(CAD) score of the CloudAerosol Lidar with Orthogonal Polarization(CALIOP) instrument on the CALIPSO satellite. The CAD score classifies clouds and aerosols by the probability density functions of attenuated backscatter, total color ratio, volume depolarization ratio, altitude, and latitude. After applying several filters to avoid artifacts, the TZ was identified as those atmospheric layers that cannot be clearly classified as clouds or aerosols, layers within the no-confidence range(NCR) of the CAD score, and cirrus fringes. The optical characteristics of NCR layers exhibit two main clusters: Cluster 1, with properties between high-altitude ice clouds and aerosols(e.g., wispy cloud fragments), and Cluster 2, with properties between water clouds and aerosols at lower altitudes(e.g., large hydrated aerosols). Our results highlight the significant ubiquity of TZ conditions, which appear in 9.5% of all profiles and comprise 6.4% of the detected layers. Cluster 1 and cirrus-fringe layers predominate near the ITCZ and in mid-latitudes, whereas Cluster 2 layers are more frequent over the oceans along the central West African and East Asian coasts, where elevated smoke and dusty marine aerosols are common.展开更多
To ensure the efficient use of resources,particularly in water-scarce arid and semi-arid regions where abiotic stress threatens food security,assessing soil and climate suitability for specific crops is crucial.Simult...To ensure the efficient use of resources,particularly in water-scarce arid and semi-arid regions where abiotic stress threatens food security,assessing soil and climate suitability for specific crops is crucial.Simultaneously,food production must align with sustainable development goals by minimizing negative environmental impacts.Therefore,establishing agro-climatic suitability using a spatiotemporal approach is essential.This involves three key steps:first,determining the climatically appropriate months based on the species’requirements(temporal suitability),and second,establishing the soil suitability of specific plots(spatial suitability).Following this,quantifying crop evapotranspiration allows for optimized water use.This study used climatic and soil variables from diverse data sources to characterize the study area.Subsequently,suitability classes for Portulaca oleracea were determined based on existing literature.Our analysis concerning temporal suitability revealed that June and July are the optimal months for sowing this species in all of the municipalities.Spatially,approximately 30%of the agricultural land use of the study area exhibits a highly suitable class in most municipalities.Both dimensions,the temporal and the spatially,were validated through Chi square(χ^(2))Goodness-of-Fit test and theχ^(2)test of independence,respectively.Consequently,for a one-month production cycle during periods of high suitability,estimated evapotranspiration values are between 210 and 245 mm.In brief,the study area demonstrates favorable agro-climatic conditions for P.oleracea cultivation in specific months of the year according to parameters used,with potential in a large proportion of agricultural land and achievable water requirements.展开更多
Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess...Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess the potential of passive techniques,namely black polyethylene mulch and row covers,for modifying RZT dynamics in lettuce(Lactuca sativa L.)production and to evaluate the predictive performance of the eXtreme Gradient Boosting(XGBoost)algorithm.Experiments were conducted in Iğdır,Türkiye,over a 61-day period,with soil temperature continuously monitored at depths of 1-30 cm under mulched and non-mulched conditions,alongside measurements of greenhouse air temperature both with and without row covers.The application of row covers increased internal air temperature by 5.8℃,while mulching raised RZT by 0.6-1.3℃,with effects diminishing at deeper layers.XGBoost modeling achieved high predictive accuracy,with RMSE values of 0.150-0.189◦C and R^(2)values above 0.99,and feature-importance analysis indicated that neighboring soil depths were the strongest predictors of RZT.These findings show that integrating row covers and mulching can stabilize the root-zone microclimate without active heating.The XGBoost model provides a robust tool for forecasting soil temperature and supports sustainable greenhouse production in cold regions.展开更多
This study investigates the microstructure and co-precipitation behavior of multicomponent(Ni(Al,Mn)and Cu)nanoparticles in the weld heat-affected zones of high-strength low-carbon steel.Through thermal simulations,th...This study investigates the microstructure and co-precipitation behavior of multicomponent(Ni(Al,Mn)and Cu)nanoparticles in the weld heat-affected zones of high-strength low-carbon steel.Through thermal simulations,the intercritical,fine-grained,and coarsegrained heat-affected zones were systematically characterized to elucidate the interplay between the microstructure,precipitation,and mechanical properties.At a heat input of 30 kJ·cm^(−1),Ni(Al,Mn)nanoparticles dissolve in the intercritical heat-affected zone,followed by dense reprecipitation coupled with significant coarsening of Cu particles during cooling,thereby retaining high strength but reducing impact toughness to(142±10)J(compared to(205±8)J of the base metal).The fine-grained heat-affected zone,under the same heat input,exhibits a refined ferritic-bainite matrix with a few fine Ni(Al,Mn)and slightly coarsened Cu particles,thus enhancing plastic deformation capacity and resulting in superior impact toughness of(196±7)J.Despite complete dissolution of original precipitates at peak temperatures in the coarse-grained heat-affected zone,re-precipitated nanoparticles provide effective strengthening effect,compensating for grain coarsening and dislocation recovery and resulting in an impressive impact toughness of(186±6)J.The toughening mechanism is primarily attributed to the synergistic actions of the matrix,precipitates,and deformation twins.These findings provide mechanistic and quantitative insights for developing processing-microstructure-property relationships in different welding heat-affected zones,and this framework can be further utilized to optimize welding parameters for tailored applications.展开更多
The Almus Fault Zone(AFZ)is one of the major splay faults of the North Anatolian Fault Zone(NAFZ)and is important for understanding its tectonic features and assessing regional seismic hazards.This research presents t...The Almus Fault Zone(AFZ)is one of the major splay faults of the North Anatolian Fault Zone(NAFZ)and is important for understanding its tectonic features and assessing regional seismic hazards.This research presents the integration of morphometric indices to quantitatively assess the spatial variation of tectonic activity along the AFZ.The AFZ is an active fault with both strike-slip and normal fault components and consists of two main branches,Mercimekdağı-Çamdere Fault(MÇF)and Tokat Fault(TF)segments.This study aims to assess the relative tectonic activity of the AFZ using various morphometric indices,based on a 10 m resolution DEM,with the aid of ArcGIS and MATLAB software.For this purpose,morphometric indices such as hypsometric integral(HI:0.35-0.65),mountain front sinuosity(Smf:1.3-1.44),valley floor width-height ratio(Vf:0.15-2.28),asymmetry factor(AF:23-77),drainage basin shape(Bs:1.13-6.10)and normalized steepness index(ksn:1-498)were applied to 53 drainage basins.When the Smf and mean Vf indices results were evaluated,it was calculated that the uplift ratio of the region was more than 0.5 mm/yr.The spatial distribution of the relative tectonic activity(Iat)of the area was revealed by combining the obtained morphometric indices analysis results.According to the Iat result,it was concluded that the MercimekdağıÇamdere Fault and Tokat Fault segments have high tectonic activity,but the Mercimekdağı-Çamdere Fault segment has higher tectonic activity.The results obtained were also confirmed by field observations.This research provides valuable information for the evaluation of tectonic activity in drainage systems controlled by splay faults.展开更多
The Guanxian-Anxian fault zone in the Longmen Shan,Sichuan,China,exhibits long-term creep-slip but ruptured during the 2008 Wenchuan earthquake,challenging the view that creeping faults rarely generate strong earthqua...The Guanxian-Anxian fault zone in the Longmen Shan,Sichuan,China,exhibits long-term creep-slip but ruptured during the 2008 Wenchuan earthquake,challenging the view that creeping faults rarely generate strong earthquakes.To investigate the transition from creep-slip to stick-slip,we analyzed fault rocks from the WFSD-3,using microstructural observations,XRD,μXRF,Raman spectroscopy,and quartz grain size statistics.Fault rocks show intense foliation,pressure-solution structures,and abundant clay minerals,reflecting long-term aseismic creep.At the interface between black and gray fault gouges at~1249.98 m,microstructures indicate stick-slip behavior,including truncated grains,angular fragments,and finer grain sizes.Here,clay content drops sharply while strong minerals(quartz,feldspar,calcite,dolomite)increase.Elemental mapping shows Al and K enriched in black gouge,whereas Ca and Si in gray gouge;Raman spectroscopy indicates possible graphitization;the finest quartz grains occur in black gouge.These features mark co-seismic principal slip zone of the Wenchuan earthquake.We propose that fluid-driven transformation of strong minerals into clays facilitates creep-slip,whereas localized precipitation of strong minerals strengthens the fault,causing stress accumulation and controlling the creep-slip to stick-slip transition.This mechanism has implications for reassessing seismic hazards of creeping faults.展开更多
Ensuring national food security amidst rapid population growth and increasing extreme weather events remains a critical global challenge.However,the extent to which agricultural modernization in China enhances grain y...Ensuring national food security amidst rapid population growth and increasing extreme weather events remains a critical global challenge.However,the extent to which agricultural modernization in China enhances grain yield and contributes to food security remains unclear.Therefore,using panel data from 327 Chinese cities(2013–2021),this study employs spatial econometric models to analyze the spatial spillover effects of agricultural modernization level(AML)on grain yield and to reveal regional heterogeneity across nine major agricultural zones.The results showed a cumulative grain yield increase of 23.7 million tons,with peak productivity concentrated along the Hu Line and declining eastward and westward.AML also exhibited a steady increase but a clear spatial gradient,decreasing from coastal to inland regions,with the highest level observed in Southern China(SC).A key finding was that a 1%increase in AML directly raised local grain yield by an average of 4.185%,accompanied by significant positive spillover effects on neighboring regions.Regional variations revealed distinct patterns:the direct effects of AML were more pronounced in southern and eastern zones,while spillover effects dominated in northern and western zones.The largest positive direct impact of AML on grain yield was observed in the SC(8.499%),while Middle-Lower Yangtze Plain ranked second but exhibited the strongest positive spatial spillover effect(4.534%).These findings highlight the critical role of agricultural modernization in promoting grain production and provide a solid basis for optimizing regional agricultural systems,ensuring food security,and advancing sustainable agriculture.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Nereididae is a prolific annelid family widely distributed in the world oceans,especially in the Indo-Pacific Convergence Zone(IPCZ).However,its biogeographic pattern remains unexplored in IPCZ.To contribute to the un...Nereididae is a prolific annelid family widely distributed in the world oceans,especially in the Indo-Pacific Convergence Zone(IPCZ).However,its biogeographic pattern remains unexplored in IPCZ.To contribute to the understanding of biodiversity and biogeography of Nereididae in the IPCZ,we integrated historical data of species distributions with those of model-predicted ones to determine the biogeographic patterns of nereid species,from which we projected to its future distribution patterns for 2090-2100 under different climate scenarios(SSP1-1.9 and SSP5-8.5).Functional diversity within IPCZ was assessed using functional richness,functional evenness,and functional disparity.Divergence times within Nereididae were estimated using three DNA marker genes(COI,16S,and 18S rRNA),and a time tree was constructed based on a strict molecular clock model.The IPCZ was established as a key Nereididae biodiversity hotspot through distribution modelling of 256 species(44 genera),and temperature emerging as the predominant climatic driver of species distribution patterns.The distribution of species and functional diversity is notable for its non-centralized pattern.We projected that by the end of the century,areas of medium-to-high species richness will expand significantly under the low-emission SSP1-1.9 climate scenario.However,under the high-emission SSP5-8.5 scenario,the suitability of these regions significantly declines,posing an increasingly severe threat to biodiversity.In addition,by molecular clock analysis,we revealed that the evolutionary divergence of extant nereidid species occurred mainly in the Cretaceous and Jurassic,suggesting that paleogeographical and environmental events,such as oceanic anoxic events,might have played a pivotal role in shaping the evolutionary trajectory and ecological adaptations of marine annelids.These findings highlight the importance of considering both current biodiversity patterns and historical contexts in conservation planning,and provided insights into the potential factors on the biogeographic distribution and evolutionary processes of Nereididae.展开更多
Automatic identificationof discontinuities is a key focus in rock slope research.Conventional methods typically target small areas,which limits efficiencyand applicability for complex discontinuities in large-scale ro...Automatic identificationof discontinuities is a key focus in rock slope research.Conventional methods typically target small areas,which limits efficiencyand applicability for complex discontinuities in large-scale rock slopes.This study uses multi-angle unmanned aerial vehicle(UAV)nap-of-the-object photogrammetry to construct a high-definitionthree-dimensional(3D)point cloud model of the slope.The edge-firstconnection algorithm identifiesall edge points of discontinuities in the point cloud and completes recognition through simple connection analysis.This method avoids the complex calculations required for sequentially identifying discontinuity edges in conventional methods and achieves significantacceleration through algorithm optimization and parallel computation support.Based on this algorithm,the RockDiscontinuity Identification(RD ID)software is developed and applied to identify numerous highly disordered discontinuities on the Xulong slope in the Jinsha River suture zone.Processing tens of millions of point clouds within approximately 2 h demonstrates exceptional computational efficiency.The automatic algorithm accurately identifiesnearly 80%of planar discontinuities,with orientations and trace lengths closely matching manual results,highlighting its potential for large-scale rock outcrop applications.Comparisons with region growing algorithms further emphasize its effectiveness and accuracy.However,the algorithm struggles to identify linear discontinuities,which are a major source of error.Additionally,high roughness and smooth edges of discontinuities affect recognition accuracy,indicating areas for further improvement.展开更多
The number and diversity of inhibitory neurons(INs)increased substantially during mammalian brain evolution.However,the generative mechanisms of the vast repertoire of human INs remain elusive.We performed spatial and...The number and diversity of inhibitory neurons(INs)increased substantially during mammalian brain evolution.However,the generative mechanisms of the vast repertoire of human INs remain elusive.We performed spatial and single-cell transcriptomics of human medial ganglionic eminence(hMGE),a pivotal source of cortical and subpallial INs,and built the trajectories of hMGE-derived cells during brain development.We identified spatiotemporally and molecularly segregated progenitor cell populations fated to produce distinct IN types.展开更多
Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains rel...Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains relatively limited.Focusing on the indirect driving role of policy on LUC,this study proposed County Development Level(CDL)under Major Function Oriented Zone Planning(MFOZP)guidance as an intermediary variable,bridging the implicit influence of MFOZP and the explicit changes in LUC.Using the Beijing-Tianjin-Hebei(BTH)region in China as a case study,we analyzed the spatio-temporal evolution characteristics of LUC and CDL for the periods 2000-2010 and 2010-2020,before and after MFOZP implementation.Panel models and Geographically Weighted Regression(GWR)were employed to explore the mechanism by which CDL influences LUC under MFOZP guidance.The results show that:1)MFOZP implementation effectively alleviates land use pressure from regional development,with LUC continuously declining at a rate of 2.41%,while CDL exhibits slight growth(3.84%),during 2010-2020.2)Under MFOZP guidance,CDL reduces pressure on Land Use Structure Conflict(LUSC)and Land Use Process Conflict(LUPC),enhances its inhibitory effect on Land Use Function Conflict(LUFC),and significantly contributes to LUC coordination,with notable spatial heterogeneity.3)The coupling relationship between CDL and LUC has improved post-implementation.Based on this,tailored LUC coordination strategies are proposed for different functional zones.This study confirms the effectiveness of MFOZP in coordinating LUC and provides a scientific reference for LUC research under policy frameworks and the governance of LUC in the BTH region.展开更多
In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is p...In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.展开更多
In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the ou...In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.展开更多
The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor...The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.展开更多
AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(...AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour展开更多
Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change o...Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.展开更多
The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence...The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
基金financial support from the National Key Research and Development Program of China(No.2023YFC2907904)the National Natural Science Foundation of China(Nos.52374364,52104355,52074363)+1 种基金National Sustainable Development Agenda Innovation Demonstration Zones:Provincial Special“Open Competition”Project in Chenzhou,China(No.2022sfq57)Postdoctoral Innovation Talent Support Program,China(No.BX20230438)。
文摘The effect of temperature on molten zone length was investigated through simulation to optimize the control of molten zone length during the experimental process. The temperature gradient distribution within the molten zone during zone refining was simulated using COMSOL Multiphysics software and experimentally validated. The simulated molten zone length showed good agreement with the actual measured length. The experimental study of tellurium purification by zone refining was conducted under the following conditions: three passes of zone refining, a hydrogen flow rate of 0.5 L/min, and molten zone movement speeds of 0.5 and 1.0 mm/min. The results demonstrated that the removal efficiencies of impurities such as Ca and Cu exceeded 95%, while the removal efficiency of phosphorus (P) reached over 70%. And the purity of tellurium reached 6N.
基金funded through project NUBOLOSYTI (PID2023149972NB-100) of the Spanish Ministry of Science and Innovation (MICINN)supported by an IFUdG 2022 fellowship。
文摘The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the cloud-aerosol continuum.This study assesses the global distribution of TZ conditions, analyzes its optical characteristics, and determines the cloud or aerosol types most commonly associated with them, using the cloud-aerosol discrimination(CAD) score of the CloudAerosol Lidar with Orthogonal Polarization(CALIOP) instrument on the CALIPSO satellite. The CAD score classifies clouds and aerosols by the probability density functions of attenuated backscatter, total color ratio, volume depolarization ratio, altitude, and latitude. After applying several filters to avoid artifacts, the TZ was identified as those atmospheric layers that cannot be clearly classified as clouds or aerosols, layers within the no-confidence range(NCR) of the CAD score, and cirrus fringes. The optical characteristics of NCR layers exhibit two main clusters: Cluster 1, with properties between high-altitude ice clouds and aerosols(e.g., wispy cloud fragments), and Cluster 2, with properties between water clouds and aerosols at lower altitudes(e.g., large hydrated aerosols). Our results highlight the significant ubiquity of TZ conditions, which appear in 9.5% of all profiles and comprise 6.4% of the detected layers. Cluster 1 and cirrus-fringe layers predominate near the ITCZ and in mid-latitudes, whereas Cluster 2 layers are more frequent over the oceans along the central West African and East Asian coasts, where elevated smoke and dusty marine aerosols are common.
文摘To ensure the efficient use of resources,particularly in water-scarce arid and semi-arid regions where abiotic stress threatens food security,assessing soil and climate suitability for specific crops is crucial.Simultaneously,food production must align with sustainable development goals by minimizing negative environmental impacts.Therefore,establishing agro-climatic suitability using a spatiotemporal approach is essential.This involves three key steps:first,determining the climatically appropriate months based on the species’requirements(temporal suitability),and second,establishing the soil suitability of specific plots(spatial suitability).Following this,quantifying crop evapotranspiration allows for optimized water use.This study used climatic and soil variables from diverse data sources to characterize the study area.Subsequently,suitability classes for Portulaca oleracea were determined based on existing literature.Our analysis concerning temporal suitability revealed that June and July are the optimal months for sowing this species in all of the municipalities.Spatially,approximately 30%of the agricultural land use of the study area exhibits a highly suitable class in most municipalities.Both dimensions,the temporal and the spatially,were validated through Chi square(χ^(2))Goodness-of-Fit test and theχ^(2)test of independence,respectively.Consequently,for a one-month production cycle during periods of high suitability,estimated evapotranspiration values are between 210 and 245 mm.In brief,the study area demonstrates favorable agro-climatic conditions for P.oleracea cultivation in specific months of the year according to parameters used,with potential in a large proportion of agricultural land and achievable water requirements.
文摘Root-zone temperature(RZT)strongly affects plant growth,nutrient uptake and tolerance to environmental stress,making its regulation a key challenge in greenhouse cultivation in cold climates.This study aimed to assess the potential of passive techniques,namely black polyethylene mulch and row covers,for modifying RZT dynamics in lettuce(Lactuca sativa L.)production and to evaluate the predictive performance of the eXtreme Gradient Boosting(XGBoost)algorithm.Experiments were conducted in Iğdır,Türkiye,over a 61-day period,with soil temperature continuously monitored at depths of 1-30 cm under mulched and non-mulched conditions,alongside measurements of greenhouse air temperature both with and without row covers.The application of row covers increased internal air temperature by 5.8℃,while mulching raised RZT by 0.6-1.3℃,with effects diminishing at deeper layers.XGBoost modeling achieved high predictive accuracy,with RMSE values of 0.150-0.189◦C and R^(2)values above 0.99,and feature-importance analysis indicated that neighboring soil depths were the strongest predictors of RZT.These findings show that integrating row covers and mulching can stabilize the root-zone microclimate without active heating.The XGBoost model provides a robust tool for forecasting soil temperature and supports sustainable greenhouse production in cold regions.
基金supported by the National Natural Science Foundation of China(No.U2330110)Youth Science Foundation Project(Category A)of Liaoning Province,China(No.2025JH6/101100006).
文摘This study investigates the microstructure and co-precipitation behavior of multicomponent(Ni(Al,Mn)and Cu)nanoparticles in the weld heat-affected zones of high-strength low-carbon steel.Through thermal simulations,the intercritical,fine-grained,and coarsegrained heat-affected zones were systematically characterized to elucidate the interplay between the microstructure,precipitation,and mechanical properties.At a heat input of 30 kJ·cm^(−1),Ni(Al,Mn)nanoparticles dissolve in the intercritical heat-affected zone,followed by dense reprecipitation coupled with significant coarsening of Cu particles during cooling,thereby retaining high strength but reducing impact toughness to(142±10)J(compared to(205±8)J of the base metal).The fine-grained heat-affected zone,under the same heat input,exhibits a refined ferritic-bainite matrix with a few fine Ni(Al,Mn)and slightly coarsened Cu particles,thus enhancing plastic deformation capacity and resulting in superior impact toughness of(196±7)J.Despite complete dissolution of original precipitates at peak temperatures in the coarse-grained heat-affected zone,re-precipitated nanoparticles provide effective strengthening effect,compensating for grain coarsening and dislocation recovery and resulting in an impressive impact toughness of(186±6)J.The toughening mechanism is primarily attributed to the synergistic actions of the matrix,precipitates,and deformation twins.These findings provide mechanistic and quantitative insights for developing processing-microstructure-property relationships in different welding heat-affected zones,and this framework can be further utilized to optimize welding parameters for tailored applications.
文摘The Almus Fault Zone(AFZ)is one of the major splay faults of the North Anatolian Fault Zone(NAFZ)and is important for understanding its tectonic features and assessing regional seismic hazards.This research presents the integration of morphometric indices to quantitatively assess the spatial variation of tectonic activity along the AFZ.The AFZ is an active fault with both strike-slip and normal fault components and consists of two main branches,Mercimekdağı-Çamdere Fault(MÇF)and Tokat Fault(TF)segments.This study aims to assess the relative tectonic activity of the AFZ using various morphometric indices,based on a 10 m resolution DEM,with the aid of ArcGIS and MATLAB software.For this purpose,morphometric indices such as hypsometric integral(HI:0.35-0.65),mountain front sinuosity(Smf:1.3-1.44),valley floor width-height ratio(Vf:0.15-2.28),asymmetry factor(AF:23-77),drainage basin shape(Bs:1.13-6.10)and normalized steepness index(ksn:1-498)were applied to 53 drainage basins.When the Smf and mean Vf indices results were evaluated,it was calculated that the uplift ratio of the region was more than 0.5 mm/yr.The spatial distribution of the relative tectonic activity(Iat)of the area was revealed by combining the obtained morphometric indices analysis results.According to the Iat result,it was concluded that the MercimekdağıÇamdere Fault and Tokat Fault segments have high tectonic activity,but the Mercimekdağı-Çamdere Fault segment has higher tectonic activity.The results obtained were also confirmed by field observations.This research provides valuable information for the evaluation of tectonic activity in drainage systems controlled by splay faults.
基金supported by the National Natural Science Foundation of China(42230312,42272270,42172262,42372266)the Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(2024ZD1000500)the China Geological Survey Project(DD20240041).
文摘The Guanxian-Anxian fault zone in the Longmen Shan,Sichuan,China,exhibits long-term creep-slip but ruptured during the 2008 Wenchuan earthquake,challenging the view that creeping faults rarely generate strong earthquakes.To investigate the transition from creep-slip to stick-slip,we analyzed fault rocks from the WFSD-3,using microstructural observations,XRD,μXRF,Raman spectroscopy,and quartz grain size statistics.Fault rocks show intense foliation,pressure-solution structures,and abundant clay minerals,reflecting long-term aseismic creep.At the interface between black and gray fault gouges at~1249.98 m,microstructures indicate stick-slip behavior,including truncated grains,angular fragments,and finer grain sizes.Here,clay content drops sharply while strong minerals(quartz,feldspar,calcite,dolomite)increase.Elemental mapping shows Al and K enriched in black gouge,whereas Ca and Si in gray gouge;Raman spectroscopy indicates possible graphitization;the finest quartz grains occur in black gouge.These features mark co-seismic principal slip zone of the Wenchuan earthquake.We propose that fluid-driven transformation of strong minerals into clays facilitates creep-slip,whereas localized precipitation of strong minerals strengthens the fault,causing stress accumulation and controlling the creep-slip to stick-slip transition.This mechanism has implications for reassessing seismic hazards of creeping faults.
基金National Natural Science Foundation of China,No.42471455,No.42230113National Key Research and Development Program of China,No.2022YFC3800804-01。
文摘Ensuring national food security amidst rapid population growth and increasing extreme weather events remains a critical global challenge.However,the extent to which agricultural modernization in China enhances grain yield and contributes to food security remains unclear.Therefore,using panel data from 327 Chinese cities(2013–2021),this study employs spatial econometric models to analyze the spatial spillover effects of agricultural modernization level(AML)on grain yield and to reveal regional heterogeneity across nine major agricultural zones.The results showed a cumulative grain yield increase of 23.7 million tons,with peak productivity concentrated along the Hu Line and declining eastward and westward.AML also exhibited a steady increase but a clear spatial gradient,decreasing from coastal to inland regions,with the highest level observed in Southern China(SC).A key finding was that a 1%increase in AML directly raised local grain yield by an average of 4.185%,accompanied by significant positive spillover effects on neighboring regions.Regional variations revealed distinct patterns:the direct effects of AML were more pronounced in southern and eastern zones,while spillover effects dominated in northern and western zones.The largest positive direct impact of AML on grain yield was observed in the SC(8.499%),while Middle-Lower Yangtze Plain ranked second but exhibited the strongest positive spatial spillover effect(4.534%).These findings highlight the critical role of agricultural modernization in promoting grain production and provide a solid basis for optimizing regional agricultural systems,ensuring food security,and advancing sustainable agriculture.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
基金Supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB42000000)the National Natural Science Foundation of China(No.42376092)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(No.2022QNLM030004)。
文摘Nereididae is a prolific annelid family widely distributed in the world oceans,especially in the Indo-Pacific Convergence Zone(IPCZ).However,its biogeographic pattern remains unexplored in IPCZ.To contribute to the understanding of biodiversity and biogeography of Nereididae in the IPCZ,we integrated historical data of species distributions with those of model-predicted ones to determine the biogeographic patterns of nereid species,from which we projected to its future distribution patterns for 2090-2100 under different climate scenarios(SSP1-1.9 and SSP5-8.5).Functional diversity within IPCZ was assessed using functional richness,functional evenness,and functional disparity.Divergence times within Nereididae were estimated using three DNA marker genes(COI,16S,and 18S rRNA),and a time tree was constructed based on a strict molecular clock model.The IPCZ was established as a key Nereididae biodiversity hotspot through distribution modelling of 256 species(44 genera),and temperature emerging as the predominant climatic driver of species distribution patterns.The distribution of species and functional diversity is notable for its non-centralized pattern.We projected that by the end of the century,areas of medium-to-high species richness will expand significantly under the low-emission SSP1-1.9 climate scenario.However,under the high-emission SSP5-8.5 scenario,the suitability of these regions significantly declines,posing an increasingly severe threat to biodiversity.In addition,by molecular clock analysis,we revealed that the evolutionary divergence of extant nereidid species occurred mainly in the Cretaceous and Jurassic,suggesting that paleogeographical and environmental events,such as oceanic anoxic events,might have played a pivotal role in shaping the evolutionary trajectory and ecological adaptations of marine annelids.These findings highlight the importance of considering both current biodiversity patterns and historical contexts in conservation planning,and provided insights into the potential factors on the biogeographic distribution and evolutionary processes of Nereididae.
基金supported by the National Key R&D Program of China(Grant No.2022YFC3080200)the China Postdoctoral Science Foundation(Grant No.2023M731264)the Science and Technology Development Plan Project of Jilin Province,China(Grant No.20250602007RC).
文摘Automatic identificationof discontinuities is a key focus in rock slope research.Conventional methods typically target small areas,which limits efficiencyand applicability for complex discontinuities in large-scale rock slopes.This study uses multi-angle unmanned aerial vehicle(UAV)nap-of-the-object photogrammetry to construct a high-definitionthree-dimensional(3D)point cloud model of the slope.The edge-firstconnection algorithm identifiesall edge points of discontinuities in the point cloud and completes recognition through simple connection analysis.This method avoids the complex calculations required for sequentially identifying discontinuity edges in conventional methods and achieves significantacceleration through algorithm optimization and parallel computation support.Based on this algorithm,the RockDiscontinuity Identification(RD ID)software is developed and applied to identify numerous highly disordered discontinuities on the Xulong slope in the Jinsha River suture zone.Processing tens of millions of point clouds within approximately 2 h demonstrates exceptional computational efficiency.The automatic algorithm accurately identifiesnearly 80%of planar discontinuities,with orientations and trace lengths closely matching manual results,highlighting its potential for large-scale rock outcrop applications.Comparisons with region growing algorithms further emphasize its effectiveness and accuracy.However,the algorithm struggles to identify linear discontinuities,which are a major source of error.Additionally,high roughness and smooth edges of discontinuities affect recognition accuracy,indicating areas for further improvement.
文摘The number and diversity of inhibitory neurons(INs)increased substantially during mammalian brain evolution.However,the generative mechanisms of the vast repertoire of human INs remain elusive.We performed spatial and single-cell transcriptomics of human medial ganglionic eminence(hMGE),a pivotal source of cortical and subpallial INs,and built the trajectories of hMGE-derived cells during brain development.We identified spatiotemporally and molecularly segregated progenitor cell populations fated to produce distinct IN types.
基金Under the auspices of the National Key Research and Development Program of China(No.2018YFD1100803)the Fundamental Research Fund for the Central Universities(Ph.D.Top Innovative Talents Fund of CUMTB)(No.BBJ2024029)。
文摘Systematically analyzing the impact mechanisms of policy on Land Use Conflict(LUC)is crucial for constructing effective conflict mitigation strategies.However,previous research on how policy influences LUC remains relatively limited.Focusing on the indirect driving role of policy on LUC,this study proposed County Development Level(CDL)under Major Function Oriented Zone Planning(MFOZP)guidance as an intermediary variable,bridging the implicit influence of MFOZP and the explicit changes in LUC.Using the Beijing-Tianjin-Hebei(BTH)region in China as a case study,we analyzed the spatio-temporal evolution characteristics of LUC and CDL for the periods 2000-2010 and 2010-2020,before and after MFOZP implementation.Panel models and Geographically Weighted Regression(GWR)were employed to explore the mechanism by which CDL influences LUC under MFOZP guidance.The results show that:1)MFOZP implementation effectively alleviates land use pressure from regional development,with LUC continuously declining at a rate of 2.41%,while CDL exhibits slight growth(3.84%),during 2010-2020.2)Under MFOZP guidance,CDL reduces pressure on Land Use Structure Conflict(LUSC)and Land Use Process Conflict(LUPC),enhances its inhibitory effect on Land Use Function Conflict(LUFC),and significantly contributes to LUC coordination,with notable spatial heterogeneity.3)The coupling relationship between CDL and LUC has improved post-implementation.Based on this,tailored LUC coordination strategies are proposed for different functional zones.This study confirms the effectiveness of MFOZP in coordinating LUC and provides a scientific reference for LUC research under policy frameworks and the governance of LUC in the BTH region.
基金The Special Project of the Ministry of Construction ofChina (No.20060909).
文摘In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.
文摘In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.
文摘The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.
文摘AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour
基金Projects(50878191,51109092)supported by the National Natural Science Foundation of China
文摘Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.
文摘The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.
