Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting t...Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting their potential applications.Therefore,it is imperative to study the creation of lowfrequency signals using antennas with suitable dimensions.In contrast to conventional mechanical antenna techniques,our study generates low-frequency signals in the spatial domain utilizing the principle of the Doppler effect.We also defines the antenna array architecture,the timing sequency,and the radiating element signal waveform,and provides experimental prototypes including 8/64 antennas based on earlier research.In the conducted experiments,121 MHz,40 MHz,and 10 kHz composite signals are generated by 156 MHz radiating element signals.The composite signal spectrum matches the simulations,proving our low-frequency signal generating method works.This holds significant implications for research on generating low-frequency signals with small-sized antennas.展开更多
The fundamental physics of anomalous and normal Doppler resonances between electrons and electromagnetic(EM)waves is analyzed using a quantum model that incorporates angular-momentum conservation.This work extends pri...The fundamental physics of anomalous and normal Doppler resonances between electrons and electromagnetic(EM)waves is analyzed using a quantum model that incorporates angular-momentum conservation.This work extends prior theory by explicitly linking the resonant integer m to the EM wave's angular-momentum quantum number.Numerical simulations based on the volume-preserving algorithm(VPA)further confirm this correspondence.Moreover,a direct comparison of the energy-transfer ratio from translational energy to gyrokinetic energy during resonance,between classical dynamics and quantum predictions,is presented and verified numerically.展开更多
The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse moti...The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse motion of the object cannot change the one-order phase of the echo, but the high-order phase. The high-order Doppler effect of the transverse moving target is presented and a new algorithm for obtaining the transverse velocity is given. The scalar velocity of a target moving steadily in any direction can be calculated with one-order and two-order items of the echo phase. The calculating method and simulating results are given. As the transverse speed is 900 km/h, the speed calculation error is less than 0. 06% if SNR of echo signal is higher than 0 dB.展开更多
Traditional pulse Doppler radar estimates the Doppler frequency by taking advantage of Doppler modulation over different pulses and usually it requires a few pulses to estimate the Dop- pler frequency. In this paper, ...Traditional pulse Doppler radar estimates the Doppler frequency by taking advantage of Doppler modulation over different pulses and usually it requires a few pulses to estimate the Dop- pler frequency. In this paper, a novel range-Doppler imaging algorithm based on single pulse with orthogonal frequency division multiplexing （OFDM） radar is proposed, where the OFDM pulse is composed of phase coded symbols. The Doppler frequency is estimated using one single pulse by utilizing Doppler modulation over different symbols, which remarkably increases the data update rate. Besides, it is shown that the range and Doppler estimations are completely independent and the well-known range-Doppler coupling effect does not exist. The effects of target movement on the performances of the proposed algorithm are also discussed and the results show that the algo- rithm is not sensitive to velocity. Performances of the proposed algorithm as well as comparisons with other range-Doppler algorithms are demonstrated via simulation experiments.展开更多
In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the...In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the Doppler effect.Our results show that this damaging great earthquake had a dominating rupture propagation direction of 64.0°.The equivalent radius of the fault rupture surface was estimated to be 33 km,yielding the rupture area of about 3 500 km2.Thus the length of the rupture fault surface is about 230 km if the depth（or width） extent is 15 km.The computer program developed in this study can quickly provide the information about the source of a future large（damaging） earthquake,which could be very useful for predicting aftershocks and planning the rescue operations.展开更多
In order to measure the axial flowing velocity of carbon particle suspension with particle diameter of tens of micrometers, the photoacoustic Doppler(PAD) frequency shift is calculated based on a series of individual ...In order to measure the axial flowing velocity of carbon particle suspension with particle diameter of tens of micrometers, the photoacoustic Doppler(PAD) frequency shift is calculated based on a series of individual A scans using an autocorrelation method. A 532 nm pulsed laser with repetition rate of 20 Hz is used as a pumping source to generate photoacoustic signal. The photoacoustic signals are detected using a focused piezoelectric(PZT) ultrasound transducer with central frequency of 5 MHz. The suspension of carbon particles is driven by a syringe pump. The complex photoacoustic signal is calculated by the Hilbert transformation from time-domain photoacoustic signal, and then it is autocorrelated to calculate the Doppler frequency shift. The photoacoustic Doppler frequency shift is calculated by averaging the autocorrelation results of some individual A scans. The advantage of the autocorrelation method is that the time delay in autocorrelation can be defined by user, and the requirement of high pulse repetition rate is avoided. The feasibility of the proposed autocorrelation method is preliminarily demonstrated by quantifying the motion of a carbon particle suspension with flow velocity from 5 mm/s to 60 mm/s. The experimental results show that there is an approximately linear relation between the autocorrelation result and the setting velocity.展开更多
We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion...We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region, which has been known as the positive Doppler effect on optical bistability. In addition, we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.展开更多
We present an analytical model for cross-Kerr nonlinear coefficient in a four-level N-type atomic medium under Doppler broadening.The model is applied to87 Rb atoms to analyze the dependence of the cross-Kerr nonlinea...We present an analytical model for cross-Kerr nonlinear coefficient in a four-level N-type atomic medium under Doppler broadening.The model is applied to87 Rb atoms to analyze the dependence of the cross-Kerr nonlinear coefficient on the external light field and the temperature of atomic vapor.The analysis shows that in the absence of electromagnetically induced transparency(EIT)the cross-Kerr nonlinear coefficient is zero,but it is significantly enhanced when the EIT is established.It means that the cross-Kerr effect can be turned on/off when the external light field is on or off.Simultaneously,the amplitude and the sign of the cross-Kerr nonlinear coefficient are easily changed according to the intensity and frequency of the external light field.The amplitude of the cross-Kerr nonlinear coefficient remarkably decreases when the temperature of atomic medium increases.The analytical model can be convenient to fit experimental observations and applied to photonic devices.展开更多
The optical rotational Doppler effect associated with orbital angular momentum provides a new means for rotational velocity detection.In this paper,we investigate the influence of atmospheric turbulence on the rotatio...The optical rotational Doppler effect associated with orbital angular momentum provides a new means for rotational velocity detection.In this paper,we investigate the influence of atmospheric turbulence on the rotational Doppler effect.First,we deduce the generalized formula of the rotational Doppler shift in atmospheric turbulence by mode decomposition.It is found that the rotational Doppler signal frequency spectrum will be broadened,and the bandwidth is related to the turbulence intensity.In addition,as the propagation distance increases,the bandwidth also increases.And when C_(n)^(2)≤5×10^(-15)m^(-2/3)and 2z≤2 km,the rotational Doppler signal frequency spectrum width d and the spiral spectrum width d_(0)satisfy the relationship d=2d_(0-1).Finally,we analyze the influence of mode crosstalk on the rotational Doppler effect,and the results show that it destroys the symmetrical distribution of the rotational Doppler spectrum about 2l·Ω/2π.This theoretical model enables us to better understand the generation of the rotational Doppler frequency and may help us better analyze the influence of the complex atmospheric environment on the rotational Doppler frequency.展开更多
The effect of range-Doppler coupling caused by aircraft moving at very high speed makes trouble on selection of waveform parameters by using frequency-modulated interrupted continuous wave (FMICW) or frequency-coded p...The effect of range-Doppler coupling caused by aircraft moving at very high speed makes trouble on selection of waveform parameters by using frequency-modulated interrupted continuous wave (FMICW) or frequency-coded pulse (FCP). It also limits the increasing of coherent integration time. In this paper, application of coherent phase-coded pulse train (CPCPT) solves range-Doppler coupling well. Relevant processing of CPCPT consists of three parts: Doppler preprocessing, pulse compression, and Doppler post-processing. The velocity information obtained by Doppler preprocessing is used for better pulse compression and range tracking. Doppler post-processing with range tracking could make longer coherent accumulation for better detection of target and higher velocity resolution. Finally, examples of data simulation are given to demonstrate the achievements mentioned above.展开更多
Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to id...Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.展开更多
The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature va...The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature variations on the Alfvén resonant field, We discuss the mechanism of the modulation effect and lucubrate possible reasons for the Doppler effect. The results show that the Alfvén resonant field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR on HF waves has a quasi\|quadratic relation with the Alfvén field, which directly inspires the formation of cross\|spectrum between ULF waves and HF waves and results in spectral peaks at some gyro\|frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high\|speed flyer and the drifting electrons and the frequency shift from the phase variation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.展开更多
Recent experimental results of the Doppler effect formula verification are reported. The moving emitters are hydrogen atoms in the excited state. The results of the work corroborate the classical not the relativistic,...Recent experimental results of the Doppler effect formula verification are reported. The moving emitters are hydrogen atoms in the excited state. The results of the work corroborate the classical not the relativistic,formula for the Doppler effect.展开更多
The selection of proper treatment is based on identification of the causes of massive hemorrhage of gastrointestinal tract after pericardial devascularization.The combined use of prostaglandin E1 indirect portal vein ...The selection of proper treatment is based on identification of the causes of massive hemorrhage of gastrointestinal tract after pericardial devascularization.The combined use of prostaglandin E1 indirect portal vein angiography, DSA of celiac artery and color Doppler can provide detailed information about portal vein system,including the presence of embolism, spongioid changes and devasculization of left gastric vein and left gastric artery and the direction of blood flow. If these techniques failed to reveal the causes of digestive tract bleeding, the endoscopy may show lesions of gastric mucosa, which could be accountable for the bleeding.展开更多
The traditional method of measuring Doppler Effect is either reflection or dispersiion. This article clarifies that it can also verify the Doppler Effect with the refraction method. We have designed the experimental s...The traditional method of measuring Doppler Effect is either reflection or dispersiion. This article clarifies that it can also verify the Doppler Effect with the refraction method. We have designed the experimental system with the method of optical heterodyne, using the refraction light beam from a prism, and made the experiment. The experimental results are in accordance with the theoretical calculation. It is very useful in some particular case, such as in Negative- Index Materials（NIM）, to verify the Doppler Effect with this method.展开更多
Experimental results of remote laser measurement of a time structure of a pulse waves are resulted. Occurrence of the pulse waves are connected with the rhythmic reduction of a myocardittm. Speed of pulse wave＇s prop...Experimental results of remote laser measurement of a time structure of a pulse waves are resulted. Occurrence of the pulse waves are connected with the rhythmic reduction of a myocardittm. Speed of pulse wave＇s propagation does not depend on speed of current of blood, it is defined by diameter of a vessel, by its walls thickness, by elasticity of a vessel, and also by rheological properties of blood. Measurement of parameters of pulse waves is important tbr definition of a condition of cardiovascular system. Ways of measurement of characteristics of pulse waves used now （acoustic, electric, optical） are contact. In some cases, for example, in clinics on treatment of burns and so forth, the question of remote measurement of processes hemodynamics by use of methods of laser sotmding is rather actual. The results described in work have shown outlook of development of laser methods of diagnostics for present purposes. The measurement technique used by authors is based on use of longitudinal Doppler effect which essence consists in change of frequency or length of a wave of radiation at reflection from moving surface. For smoothing the measured signal （clearing from noise） the program developed by authors on the basis of the wavelet-analysis was used. Experimental measurements are shown, that the laser method allows to register distinctly structure of pulse waves which is characterized by two peaks. The results of remote laser measurement of a time structure of a pulse waves confirm the assumption made on the basis of general-theoretical physical positions, that characteristics of pulse waves can be registered on the Doppler effect basis.展开更多
The Doppler effect is a phenomenon of intrinsic kinematic character. This paper analyzes the kinematic Doppler effect for the case where the source is moving and the observer is at rest in the classical limit. The par...The Doppler effect is a phenomenon of intrinsic kinematic character. This paper analyzes the kinematic Doppler effect for the case where the source is moving and the observer is at rest in the classical limit. The particle nature properties of radiation are considered and how it affects the dynamics of the Source has been studied. The dynamical and kinematical equations have been derived by considering this effect. It has been conclusively shown that a moving light-emitting source experiences a finite recoil momentum in the direction opposite to the direction of motion and come to rest in finite time.展开更多
Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is ...Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is sometimes unbearable. To better control the noise and optimize the acoustic environment, noise spectrum characteristics were analyzed and compared with a field test and a numerical simulation. Through an energy analysis of the noise on the bridge side, the energy distribution characteristics of the noise at specific measuring points in different frequency bands were obtained. The influence of the Doppler effect on frequency shift was analyzed. Based on the partial coherence theory, a multi-input and single-output program was compiled to calculate the correlation and contribution degree of the bridge structure-borne noise and wheel/rail noise at the one-third octave center frequency. The results show that the peak noises of the bridge and the wheel/rail are concentrated at 31.5–63 Hz and 400–800 Hz, respectively. For environmental noise on the bridge side, the frequency band above 250 Hz is mainly affected by the wheel/rail noise. In areas of noise source strength, the relative ratio of noise energy above 250 Hz can reach 83.4%. Noise in the near ground and far bridge area is mainly low-frequency, and the relative energy ratio is about 8.9%. The Doppler effect has an influence of less than 6% on the frequency shift with a speed of 67.9 km/h. In the low-frequency band below 250 Hz, the noise in the acoustic shadow area near the bridge and the ground is mainly contributed to by the vibration-radiated noise of the bridge, of which the contribution of the bottom panel is the most prominent. The noise in the comprehensive noise area of the far bridge is mainly caused by the structure-borne noise of the bridge, and the contribution of each bridge panel is different. This study can provide a reference for finding the source of elevated rail noise in some challenging frequency ranges and for then determining optimal designs and measures for noise reduction.展开更多
In LEO(Low Earth Orbit)satellite communication system,the orbit height of the satellite is low,the transmission delay is short,the path loss is small,and the frequency multiplexing is more effective.However,it is an u...In LEO(Low Earth Orbit)satellite communication system,the orbit height of the satellite is low,the transmission delay is short,the path loss is small,and the frequency multiplexing is more effective.However,it is an unavoidable technical problem of the significant Doppler effect caused by the interference between satellite networks and the high-speed movement of the satellite relative to the ground.In order to improve the target detection efficiency and system security of LEO satellite communication system,blind separation technology is an effective method to process the collision signals received by satellites.Because of the signal has good sparsity in Delay-Doppler domain,in order to improve the blind separation performance of LEO satellite communication system,orthogonal Time-Frequency space(OTFS)modulation is used to convert the sampled signal to Delay-Doppler domain.DBSCAN clustering algorithm is used to classify the sparse signal,so as to separate the original mixed signal.Finally,the simulation results show that the method has a good separation effect,and can significantly improve the detection efficiency of system targets and the security of LEO satellite communication system network.展开更多
Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to...Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to provide a real-time and reliable measurement of velocity distribution in detonation exhaust flow with obvious nonuniformity.Relations are established between overlapped spectrums along probing beams and Gauss velocity distribution phantom according to the frequency shifts and tiny variations in components of light-of-sight absorbance profiles at low frequencies analyzed by the fast Fourier transform.With simulated optical measurement using H2O feature at 7185.6 cm-1 carried out on a phantom generated using a simulation of two-phase detonation by a two-fluid model,this method demonstrates a satisfying performance on recovery of velocity distribution profiles in supersonic flow even with a noise equivalent absorbance up to 2×10^(-3).This method is applied to the analysis of rapidly decreasing velocity during a complete working cycle in the external flow field of an air-gasoline detonation tube operating at 25 Hz,and results show the velocity in the core flow field would be much larger than the arithmetic average from traditional tunable diode laser doppler velocimetry.This proposed velocity distribution sensor would reconstruct nonuniform velocity distribution of high-speed flow in low cost and simple operations,which broadens the possibility for applications in research on the formation and propagation of external flow filed of detonation tube.展开更多
基金Science and Technology Project of Aerospace Information Research Institute,Chinese Academy of Sciences(Y910340Z2F)Science and Technology Project of BBEF(E3E2010201)。
文摘Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting their potential applications.Therefore,it is imperative to study the creation of lowfrequency signals using antennas with suitable dimensions.In contrast to conventional mechanical antenna techniques,our study generates low-frequency signals in the spatial domain utilizing the principle of the Doppler effect.We also defines the antenna array architecture,the timing sequency,and the radiating element signal waveform,and provides experimental prototypes including 8/64 antennas based on earlier research.In the conducted experiments,121 MHz,40 MHz,and 10 kHz composite signals are generated by 156 MHz radiating element signals.The composite signal spectrum matches the simulations,proving our low-frequency signal generating method works.This holds significant implications for research on generating low-frequency signals with small-sized antennas.
基金supported by the National Magnetic Confinement Fusion Energy Program of China(Grant No.2019YFE03020001)。
文摘The fundamental physics of anomalous and normal Doppler resonances between electrons and electromagnetic(EM)waves is analyzed using a quantum model that incorporates angular-momentum conservation.This work extends prior theory by explicitly linking the resonant integer m to the EM wave's angular-momentum quantum number.Numerical simulations based on the volume-preserving algorithm(VPA)further confirm this correspondence.Moreover,a direct comparison of the energy-transfer ratio from translational energy to gyrokinetic energy during resonance,between classical dynamics and quantum predictions,is presented and verified numerically.
基金Supported by the State Key Laboratory of Millimeter Waves(K200819)~~
文摘The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse motion of the object cannot change the one-order phase of the echo, but the high-order phase. The high-order Doppler effect of the transverse moving target is presented and a new algorithm for obtaining the transverse velocity is given. The scalar velocity of a target moving steadily in any direction can be calculated with one-order and two-order items of the echo phase. The calculating method and simulating results are given. As the transverse speed is 900 km/h, the speed calculation error is less than 0. 06% if SNR of echo signal is higher than 0 dB.
基金supported by the National Natural Science Foundation of China(No.61401475)
文摘Traditional pulse Doppler radar estimates the Doppler frequency by taking advantage of Doppler modulation over different pulses and usually it requires a few pulses to estimate the Dop- pler frequency. In this paper, a novel range-Doppler imaging algorithm based on single pulse with orthogonal frequency division multiplexing （OFDM） radar is proposed, where the OFDM pulse is composed of phase coded symbols. The Doppler frequency is estimated using one single pulse by utilizing Doppler modulation over different symbols, which remarkably increases the data update rate. Besides, it is shown that the range and Doppler estimations are completely independent and the well-known range-Doppler coupling effect does not exist. The effects of target movement on the performances of the proposed algorithm are also discussed and the results show that the algo- rithm is not sensitive to velocity. Performances of the proposed algorithm as well as comparisons with other range-Doppler algorithms are demonstrated via simulation experiments.
文摘In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the Doppler effect.Our results show that this damaging great earthquake had a dominating rupture propagation direction of 64.0°.The equivalent radius of the fault rupture surface was estimated to be 33 km,yielding the rupture area of about 3 500 km2.Thus the length of the rupture fault surface is about 230 km if the depth（or width） extent is 15 km.The computer program developed in this study can quickly provide the information about the source of a future large（damaging） earthquake,which could be very useful for predicting aftershocks and planning the rescue operations.
基金supported by the Joint Funds of the National Natural Science Foundation of China(No.U1204612)Natural Science Foundation of He’nan Educational Committee(No.13A416180)
文摘In order to measure the axial flowing velocity of carbon particle suspension with particle diameter of tens of micrometers, the photoacoustic Doppler(PAD) frequency shift is calculated based on a series of individual A scans using an autocorrelation method. A 532 nm pulsed laser with repetition rate of 20 Hz is used as a pumping source to generate photoacoustic signal. The photoacoustic signals are detected using a focused piezoelectric(PZT) ultrasound transducer with central frequency of 5 MHz. The suspension of carbon particles is driven by a syringe pump. The complex photoacoustic signal is calculated by the Hilbert transformation from time-domain photoacoustic signal, and then it is autocorrelated to calculate the Doppler frequency shift. The photoacoustic Doppler frequency shift is calculated by averaging the autocorrelation results of some individual A scans. The advantage of the autocorrelation method is that the time delay in autocorrelation can be defined by user, and the requirement of high pulse repetition rate is avoided. The feasibility of the proposed autocorrelation method is preliminarily demonstrated by quantifying the motion of a carbon particle suspension with flow velocity from 5 mm/s to 60 mm/s. The experimental results show that there is an approximately linear relation between the autocorrelation result and the setting velocity.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60978013)the Shanghai Rising Star Project,China (Grant No. 11QA1407400)
文摘We theoretically investigate the Doppler effect on optical bistability in an N-type active Raman gain atomic system inside an optical ring cavity. It is shown that the Doppler effect can greatly enhance the dispersion and thus create the bistable behaviour or greatly increase the bistable region, which has been known as the positive Doppler effect on optical bistability. In addition, we find that a positive Doppler effect can change optical bistability from the hybrid dispersion-gain type to a dispersive type.
基金supported by Vietnam’s Ministry of Education and Training under Grant No.B2018-TDV-01SP。
文摘We present an analytical model for cross-Kerr nonlinear coefficient in a four-level N-type atomic medium under Doppler broadening.The model is applied to87 Rb atoms to analyze the dependence of the cross-Kerr nonlinear coefficient on the external light field and the temperature of atomic vapor.The analysis shows that in the absence of electromagnetically induced transparency(EIT)the cross-Kerr nonlinear coefficient is zero,but it is significantly enhanced when the EIT is established.It means that the cross-Kerr effect can be turned on/off when the external light field is on or off.Simultaneously,the amplitude and the sign of the cross-Kerr nonlinear coefficient are easily changed according to the intensity and frequency of the external light field.The amplitude of the cross-Kerr nonlinear coefficient remarkably decreases when the temperature of atomic medium increases.The analytical model can be convenient to fit experimental observations and applied to photonic devices.
基金Project supported by the Research Plan Project of the National University of Defense Technology(Grant No.ZK18-0102)the National Natural Science Foundation of China(Grant No.61871389)+1 种基金the State Key Laboratory of Pulsed Power Laser Technology(Grant No.KY21C604)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant Nos.CX20220007 and CX20230024)。
文摘The optical rotational Doppler effect associated with orbital angular momentum provides a new means for rotational velocity detection.In this paper,we investigate the influence of atmospheric turbulence on the rotational Doppler effect.First,we deduce the generalized formula of the rotational Doppler shift in atmospheric turbulence by mode decomposition.It is found that the rotational Doppler signal frequency spectrum will be broadened,and the bandwidth is related to the turbulence intensity.In addition,as the propagation distance increases,the bandwidth also increases.And when C_(n)^(2)≤5×10^(-15)m^(-2/3)and 2z≤2 km,the rotational Doppler signal frequency spectrum width d and the spiral spectrum width d_(0)satisfy the relationship d=2d_(0-1).Finally,we analyze the influence of mode crosstalk on the rotational Doppler effect,and the results show that it destroys the symmetrical distribution of the rotational Doppler spectrum about 2l·Ω/2π.This theoretical model enables us to better understand the generation of the rotational Doppler frequency and may help us better analyze the influence of the complex atmospheric environment on the rotational Doppler frequency.
文摘The effect of range-Doppler coupling caused by aircraft moving at very high speed makes trouble on selection of waveform parameters by using frequency-modulated interrupted continuous wave (FMICW) or frequency-coded pulse (FCP). It also limits the increasing of coherent integration time. In this paper, application of coherent phase-coded pulse train (CPCPT) solves range-Doppler coupling well. Relevant processing of CPCPT consists of three parts: Doppler preprocessing, pulse compression, and Doppler post-processing. The velocity information obtained by Doppler preprocessing is used for better pulse compression and range tracking. Doppler post-processing with range tracking could make longer coherent accumulation for better detection of target and higher velocity resolution. Finally, examples of data simulation are given to demonstrate the achievements mentioned above.
文摘Seismologists have found that the first arrival frequencies of P waves at different seismic stations have different widths,that is,different periods or frequencies,and they think that this phenomenon can be used to identify whether a Doppler effect is induced by earthquakes.However,the fault rupture process of a real earthquake is so complex that it is difficult to identify a frequency shift similar to the Doppler effect.A method to identify whether a Doppler effect is induced by an earthquake is proposed here.If a seismic station is in the direction of fault rupture propagation,this station could observe a Doppler effect induced by the earthquake.The Doppler effect causes the frequency of the seismic wave to shift from low frequency to high frequency,and the high frequency amplitudes become mutually superimposed.Under the combined influences of the absorption effect,geometric spreading effect and Doppler effect,the high frequency amplitude of the seismic wave will gradually become higher than the low frequency amplitude with increasing epicentral distance.If we find that the high frequency amplitude is higher than the low frequency amplitude with increasing epicentral distance in the direction of fault rupture propagation,then there is a Doppler effect.The fault that generated the Wenchuan earthquake is a reverse fault,and its horizontal rupture propagation velocity was low.To link fault rupture propagation velocity with the Doppler effect and identify the Doppler effect more easily,we decompose three-component records into two directions:the direction of fault rupture propagation and the direction perpendicular to the fault rupture propagation along the fault plane.The initial components of the two directions are processed by wavelet transform.Several seismic stations in the direction of fault rupture propagation of the Wenchuan earthquake were selected,and it was found that with increasing epicentral distance,the high frequency amplitudes of the wavelet spectra become obviously higher than the low frequency amplitudes.It can be concluded that due to the existence of the Doppler effect,high frequency amplitudes can overcome the influences of the absorption and geometric spreading effects on seismic waves in the fault rupture propagation process.
文摘The propagation of HF waves in IAR can produce many nonlinear effects, including the modulation effect of IAR on HF waves and the Doppler effect. To start with the dependence of the ionospheric electron temperature variations on the Alfvén resonant field, We discuss the mechanism of the modulation effect and lucubrate possible reasons for the Doppler effect. The results show that the Alfvén resonant field can have an observable modulation effect on HF waves while its mechanism is quite different from that of Schumann resonant field on HF waves. The depth of modulation of IAR on HF waves has a quasi\|quadratic relation with the Alfvén field, which directly inspires the formation of cross\|spectrum between ULF waves and HF waves and results in spectral peaks at some gyro\|frequencies of IAR. With respect to the Doppler effect during the propagation of HF waves in IAR, it is mainly caused by the motion of the high\|speed flyer and the drifting electrons and the frequency shift from the phase variation of the reflected waves can be neglected when the frequency of HF incident wave is high enough.
文摘Recent experimental results of the Doppler effect formula verification are reported. The moving emitters are hydrogen atoms in the excited state. The results of the work corroborate the classical not the relativistic,formula for the Doppler effect.
文摘The selection of proper treatment is based on identification of the causes of massive hemorrhage of gastrointestinal tract after pericardial devascularization.The combined use of prostaglandin E1 indirect portal vein angiography, DSA of celiac artery and color Doppler can provide detailed information about portal vein system,including the presence of embolism, spongioid changes and devasculization of left gastric vein and left gastric artery and the direction of blood flow. If these techniques failed to reveal the causes of digestive tract bleeding, the endoscopy may show lesions of gastric mucosa, which could be accountable for the bleeding.
文摘The traditional method of measuring Doppler Effect is either reflection or dispersiion. This article clarifies that it can also verify the Doppler Effect with the refraction method. We have designed the experimental system with the method of optical heterodyne, using the refraction light beam from a prism, and made the experiment. The experimental results are in accordance with the theoretical calculation. It is very useful in some particular case, such as in Negative- Index Materials（NIM）, to verify the Doppler Effect with this method.
文摘Experimental results of remote laser measurement of a time structure of a pulse waves are resulted. Occurrence of the pulse waves are connected with the rhythmic reduction of a myocardittm. Speed of pulse wave＇s propagation does not depend on speed of current of blood, it is defined by diameter of a vessel, by its walls thickness, by elasticity of a vessel, and also by rheological properties of blood. Measurement of parameters of pulse waves is important tbr definition of a condition of cardiovascular system. Ways of measurement of characteristics of pulse waves used now （acoustic, electric, optical） are contact. In some cases, for example, in clinics on treatment of burns and so forth, the question of remote measurement of processes hemodynamics by use of methods of laser sotmding is rather actual. The results described in work have shown outlook of development of laser methods of diagnostics for present purposes. The measurement technique used by authors is based on use of longitudinal Doppler effect which essence consists in change of frequency or length of a wave of radiation at reflection from moving surface. For smoothing the measured signal （clearing from noise） the program developed by authors on the basis of the wavelet-analysis was used. Experimental measurements are shown, that the laser method allows to register distinctly structure of pulse waves which is characterized by two peaks. The results of remote laser measurement of a time structure of a pulse waves confirm the assumption made on the basis of general-theoretical physical positions, that characteristics of pulse waves can be registered on the Doppler effect basis.
文摘The Doppler effect is a phenomenon of intrinsic kinematic character. This paper analyzes the kinematic Doppler effect for the case where the source is moving and the observer is at rest in the classical limit. The particle nature properties of radiation are considered and how it affects the dynamics of the Source has been studied. The dynamical and kinematical equations have been derived by considering this effect. It has been conclusively shown that a moving light-emitting source experiences a finite recoil momentum in the direction opposite to the direction of motion and come to rest in finite time.
基金Project supported by the National Natural Science Foundation of China (Nos. 5140843411772230and 51678446)。
文摘Noise generated by trains running on elevated lines creates many disturbances to the normal lives of surrounding residents. Investigations have shown that people living along elevated lines complain that the noise is sometimes unbearable. To better control the noise and optimize the acoustic environment, noise spectrum characteristics were analyzed and compared with a field test and a numerical simulation. Through an energy analysis of the noise on the bridge side, the energy distribution characteristics of the noise at specific measuring points in different frequency bands were obtained. The influence of the Doppler effect on frequency shift was analyzed. Based on the partial coherence theory, a multi-input and single-output program was compiled to calculate the correlation and contribution degree of the bridge structure-borne noise and wheel/rail noise at the one-third octave center frequency. The results show that the peak noises of the bridge and the wheel/rail are concentrated at 31.5–63 Hz and 400–800 Hz, respectively. For environmental noise on the bridge side, the frequency band above 250 Hz is mainly affected by the wheel/rail noise. In areas of noise source strength, the relative ratio of noise energy above 250 Hz can reach 83.4%. Noise in the near ground and far bridge area is mainly low-frequency, and the relative energy ratio is about 8.9%. The Doppler effect has an influence of less than 6% on the frequency shift with a speed of 67.9 km/h. In the low-frequency band below 250 Hz, the noise in the acoustic shadow area near the bridge and the ground is mainly contributed to by the vibration-radiated noise of the bridge, of which the contribution of the bottom panel is the most prominent. The noise in the comprehensive noise area of the far bridge is mainly caused by the structure-borne noise of the bridge, and the contribution of each bridge panel is different. This study can provide a reference for finding the source of elevated rail noise in some challenging frequency ranges and for then determining optimal designs and measures for noise reduction.
基金fully supported by Natural Science Foundation of China Project (61871422)(62171390)Science and Technology Program of Sichuan Province (2020YFH0071)the Fundamental Research Funds for the Central Universities of Southwest Minzu University (ZYN2022032)
文摘In LEO(Low Earth Orbit)satellite communication system,the orbit height of the satellite is low,the transmission delay is short,the path loss is small,and the frequency multiplexing is more effective.However,it is an unavoidable technical problem of the significant Doppler effect caused by the interference between satellite networks and the high-speed movement of the satellite relative to the ground.In order to improve the target detection efficiency and system security of LEO satellite communication system,blind separation technology is an effective method to process the collision signals received by satellites.Because of the signal has good sparsity in Delay-Doppler domain,in order to improve the blind separation performance of LEO satellite communication system,orthogonal Time-Frequency space(OTFS)modulation is used to convert the sampled signal to Delay-Doppler domain.DBSCAN clustering algorithm is used to classify the sparse signal,so as to separate the original mixed signal.Finally,the simulation results show that the method has a good separation effect,and can significantly improve the detection efficiency of system targets and the security of LEO satellite communication system network.
基金the China Scholarship Council(Grant No.201906845059)the Young Scientists Found of the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20190439)the Fundamental Research Funds of National Key Laboratory of Transient Physics(Grant No.6142604200202)。
文摘Instantaneous and precise velocity sensing is a critical part of research on detonation mechanism and flow evolution.This paper presents a novel multi-projection tunable diode laser absorption spectroscopy solution,to provide a real-time and reliable measurement of velocity distribution in detonation exhaust flow with obvious nonuniformity.Relations are established between overlapped spectrums along probing beams and Gauss velocity distribution phantom according to the frequency shifts and tiny variations in components of light-of-sight absorbance profiles at low frequencies analyzed by the fast Fourier transform.With simulated optical measurement using H2O feature at 7185.6 cm-1 carried out on a phantom generated using a simulation of two-phase detonation by a two-fluid model,this method demonstrates a satisfying performance on recovery of velocity distribution profiles in supersonic flow even with a noise equivalent absorbance up to 2×10^(-3).This method is applied to the analysis of rapidly decreasing velocity during a complete working cycle in the external flow field of an air-gasoline detonation tube operating at 25 Hz,and results show the velocity in the core flow field would be much larger than the arithmetic average from traditional tunable diode laser doppler velocimetry.This proposed velocity distribution sensor would reconstruct nonuniform velocity distribution of high-speed flow in low cost and simple operations,which broadens the possibility for applications in research on the formation and propagation of external flow filed of detonation tube.
