The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisi...The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisiae,three of which[(suppression of exponential defect protein,SED1),(cell wall protein 2,CWP2)and(delayed anaerobic protein 4,DAN4)]were reported to show higher activity of heterologous proteins thanα-agglutinin(AGα1).The performance of yeast-enhanced green fluorescent protein(yeGFP)was evaluated using laser scanning confocal microscopy and flow cytometry.The results showed that the three anchoring regions(SED1,CWP2 and AGα1)successfully displayed yeGFP on the cell wall.To investigate the effect of the three anchoring proteins on the surface display of Rhizopus oryzaeα-amylase(ROA1)and Aspergillus aculeatusβ-glucosidase(BGL1)in C.tropicalis,we constructed surface display gene cassettes for ROA1 and BGL1,respectively.The strains containing the anchoring proteins SED1 and CWP2 showed higher activity of ROA1 and BGL1 than the strains containing the anchoring protein AGα1.The highest ROA1 and BGL1 activities of strains with SED1 were 6.37 U/g CDW and 7.93 U/g CDW,respectively,which were sixfold and eightfold higher than those of strain with AGα1.In addition,we also optimized signal peptides.The results indicated that signal peptides have an impact on enzyme activity.展开更多
A novel volumetric three-dimensional（3-D） display system is developed based on the human eye persistence and the system fuses a time-series of image slices into a single hologram like 3-D aerial image. The system de...A novel volumetric three-dimensional（3-D） display system is developed based on the human eye persistence and the system fuses a time-series of image slices into a single hologram like 3-D aerial image. The system design is introduced and key components are described. Experimental results show that the 3-D system can guide people freely walk around the display to inspect the true 3-D image without goggles.展开更多
This paper describes a virtual environment, which can present dynamic force transformation during the control of objects. A 5-DOF haptic interface with the capability to generate kinesthetic effect is combined. In thi...This paper describes a virtual environment, which can present dynamic force transformation during the control of objects. A 5-DOF haptic interface with the capability to generate kinesthetic effect is combined. In this system, the operator manipulates an object in a virtual environment by using the 5-DOF master arm. When contacting with the virtual object, the contact force can be calculated and shown in the graphic interface. The contact response and deformation of the virtual object, which are usually called haptic rendering, also can be performed. The study supplies an approach to improve the operator’s immersion and can be used in many tele-robot control fields.展开更多
Based on the helix rotating screen and the digital micro-mirror device （DMD）, the former proto of volumetric-swept display system is improved. The 3-D display system adopting a helix rotating screen to construct an ...Based on the helix rotating screen and the digital micro-mirror device （DMD）, the former proto of volumetric-swept display system is improved. The 3-D display system adopting a helix rotating screen to construct an imaging space meliorate the defects, such as the smaller image space, the fewer voxels and the severer voxel overlap dead zone caused by planar rotating screen. DMD with spatial light modular （SLM） technology increases the transmission bandwidth of 3-D data in the voxel activation subsystem and activate multi-voxel once time. The volumetric-swept system based on helix rotating screen and DMD is developed. The experimental results show that the image space, the vision dead zone, the voxels on slice, and the voxel activation capacity of the designed proto are superior to the plane rotating screen system.展开更多
This paper describes a technology of dynamic display moving image by computer monitor,which is initially used in the design of tool detection system. The paper presents the hardware and software principie and edge det...This paper describes a technology of dynamic display moving image by computer monitor,which is initially used in the design of tool detection system. The paper presents the hardware and software principie and edge detection process. The way of marking edge point coordinates and stability of moving image also is analyzed. The method reforms the conventional design of the 2-D vision detection system. Moreover,it facilitates the design of the systematic mechanical construction,is convenient to compile instrument systemsoftware,and realizes to detect and track display image simultaneously. By the work,the tool detection system is improved to practical application.展开更多
As the sunlight scattered on the sea of Guanyinshan in Xiamen,a space that bridges creativity and industry opened its door to the world.On December 15th,following a ribbon-cutting and unveiling ceremony,YKK Xiamen Gua...As the sunlight scattered on the sea of Guanyinshan in Xiamen,a space that bridges creativity and industry opened its door to the world.On December 15th,following a ribbon-cutting and unveiling ceremony,YKK Xiamen Guanyinshan Showroom,the brand's second and largest comprehensive showroom,was officially inaugurated.This showroom is more than a product display window,it is an"Inspiration Hub"integrating exhibition,co-creation,and service.Its launch signifies YKK's progression in the Chinese market from“building an efficient product proposal system”to a new stage of“deep collaborative co-creation.”展开更多
Detector and event visualization are crucial components of high-energy physics(HEP)experimental software.Virtual reality(VR)technologies and multimedia development platforms,such as Unity,offer enhanced display effect...Detector and event visualization are crucial components of high-energy physics(HEP)experimental software.Virtual reality(VR)technologies and multimedia development platforms,such as Unity,offer enhanced display effects and flexible extensibility for visualization in HEP experiments.In this study,we present a VR-based method for detector and event displays in the Jiangmen Underground Neutrino Observatory(JUNO)experiment.This method shares the same detector geometry descriptions and event data model as those in the offline software and provides the necessary data conversion interfaces.The VR methodology facilitates an immersive exploration of the virtual environment in JUNO,enabling users to investigate the detector geometry,visualize event data,and tune the detector simulation and event reconstruction algorithms.Additionally,this approach supports applications in data monitoring,physics data analysis,and public outreach initiatives.展开更多
Head-up displays(HUDs)are emerging as key components of intelligent vehicles,requiring wide-depth,large-area,and high-efficiency dynamic imaging,which remains difficult to realize with traditional refractive optics.Co...Head-up displays(HUDs)are emerging as key components of intelligent vehicles,requiring wide-depth,large-area,and high-efficiency dynamic imaging,which remains difficult to realize with traditional refractive optics.Computer-generated holography(CGH)with diffraction optics offers a promising solution to these technical demands.However,CGH optimization based on the fast Fourier transform(FFT)faces limitations such as zero-padding redundancy,coupled sampling intervals,and incompatible near-and farfield propagation models.Here,we report a holography-based multiplane HUD using a matrix multiplication(MM)-assisted diffraction algorithm that restructures the Fresnel integral into two sequential matrix operations,thus eliminating zero-padding and enabling fully decoupled sampling between object and image planes.Compared with FFT-based angular spectrum methods,the MM approach significantly improves computational speed and memory efficiency for hologram design,which is validated by demonstrating dual-plane holography with a size ratio exceeding 100:1 and unified reconstruction across Fresnel and Fraunhofer regimes within a single computation.A prototype HUD system is demonstrated successfully to exhibit multiple-plane holographic virtual images that can be mixed with real-world objects at three independent planes.The technique might be one of the potential candidates for next-generation intelligent vehicle displays.展开更多
White Cyphochilus insulanus beetles,exhibiting both environmental camouflage display and radiative cooling functions,serve as a good prototype for biomimetic fabrication.As inspired,this work presents a femtosecond(fs...White Cyphochilus insulanus beetles,exhibiting both environmental camouflage display and radiative cooling functions,serve as a good prototype for biomimetic fabrication.As inspired,this work presents a femtosecond(fs)laser-based biomimetic fabrication strategy that takes full use of the synthesized radiative cooling nanomaterials for a groundbreaking stimuli-responsive infrared(IR)impressionistic camouflage display.The proposed technique is capable of readily transforming various substrates(quartz glass and metals including Ti,Al,Zr,and W)into self-assembled porous networks(aerogels)consisting of oxygen-vacancy-rich oxide nanoparticles.Surprisingly,the emissions of all as-prepared porous particle-networks in the radiative-cooling long-wavelength infrared(LWIR)band are above 95%,with the SiO_(2) aerogels reaching a maximum of 99.6%.Benefiting from the far-from-equilibrium thermodynamic kinetics,metastable phases of anatase TiO_(2),tetragonal zirconia(t-ZrO_(2)),and monoclinic WO_(3)(Pc)are synthesizable,opening up opportunities for exploring their optical applications.Taking the low-temperature metastable phase WO_(3)(Pc)as representative for systematic studies,it is found that(1)the ratio WO_(3)(Pc)phase to that of room-temperature phase of WO_(3)(P2_(1)/n)can be tailored by modulation of processing parameters;(2)laser synthesized aerogels with hybrid phases of WO_(3)(Pc)and WO_(3)(P2_(1)/n)have a brighter visible whiteness,higher visible/nearinfrared(NIR)spectral selectivity than the natural prototype of white Cyphochilus insulanus beetles but with comparable LWIR emittance.White WO_(3) aerogel in situ deposited during flexibly fs laser artistic patterning can blur the painting features due to its radiative cooling effect,allowing a colorful impressionistic IR display in the heating mode.What's more,invisible painting features concealed by the white deposited WO_(3) aerogel are clearly/faintly distinguishable by introducing external stimuli of a human hand and sample heating,respectively,catalyzing progress in optical encryption and selectively stimuli-responsive decryption display in the infrared band.展开更多
Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statist...Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.展开更多
Plant flowering and breeding characteristics are important for us to understand the reproduction of plant populations. In this paper, we studied the reproduction characteristics of Jatropha curcas in Yuanjiang County ...Plant flowering and breeding characteristics are important for us to understand the reproduction of plant populations. In this paper, we studied the reproduction characteristics of Jatropha curcas in Yuanjiang County （23°36＇1＇4, 101°00＇E）, Yunnan Province. The plant produces flowers in dichasial inflorescences. Normally, the flowers are unisexual, and male and female flowers are produced in the same inflorescence. Only a few male flowers are produced in an inflorescence, and fruits are produced only through pollination between different flowers from the same or different plants. By the treatments of emasculation, bagging and artificial pollination in this experiment, there were few but same fruit set ratios when the inflorescences were emasculated, bagged, or bagged with net, except artificial pollination treatments, which showed that Jatropha curcas could produce fruit through apomixis but not wind pollination. When the inflorescences were unbagged, unemasculated and with free pollination treatments, or bagged, emasculated and with artificial cross-pollination treatments, or unbagged, emasculated and with free pollination treatments, there were many fruits produced. It showed that Jatropha curcas shows outcrossing, is self-compatible, and demanding for pollinators. Normally, the male flowers open first and a few flowers bloom in one day in a raceme. These flowers last a long time in bloom. However, a large number of female flowers open from the third to the fifth day, with some female flowers opening first in a few raceme. This shows a tendency to promote xenogamy and minimize geitonogamy.展开更多
This paper introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the Performance Standards for ECDIS established by the International Maritime Organization (...This paper introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the Performance Standards for ECDIS established by the International Maritime Organization (IMO) and the International Hydrographic Organization (IHO).It also describes the key features and the important functions of ECDIS.Then the future development of ECDIS in marine is discussed.展开更多
SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable ...SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show, large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, SimWall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, SimWall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints, projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall soft- ware environment.展开更多
The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-lo...The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-low power and high performance is adopted. Firstly, the voltage value which is proportional to the acceleration value is output by ADXL345 when the system is powered. Secondly, the voltage value is converted into the corresponding digital signal by AD converter of the sensor. Thirdly, the digital signal is transformed into the titl angle according to the arithmetic processing of the MSP430F149. Finally, the corresponding angle is displayed on the liquid crystal display （LCD） screen. Experimental results show that the design has high sensitivity and response speed compared with the conventional methods. It is suitable for practical engineering application because of simple structure, low cost and low power consumption.展开更多
A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four step...A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four steps is discussed. Firstly, approaches are proposed to transform four types of common judgement representations into a unified expression by the form of the IFS, and the features of unifications are analyzed. Then, the aggregation operator called the IFSs weighted averaging （IFSWA） operator is taken to synthesize decision-makers’ （DMs’） preferences by the form of the IFS. In this operator, the DM’s reliability weights factors are determined based on the distance measure between their preferences. Finally, an improved score function is used to rank alternatives and to get the best one. An illustrative example proves the proposed method is effective to valuate the ergonomics of the ACDCS.展开更多
The EAST plasma control system （PCS） is in continuous development to satisfy the EAST experimental requirements. In order to realize low latency and distortion-free signal transmission between PCS and servo systems ...The EAST plasma control system （PCS） is in continuous development to satisfy the EAST experimental requirements. In order to realize low latency and distortion-free signal transmission between PCS and servo systems such as the poloidal field power supply, in-vessel coil power supply and real-time scope, reflective memory boards （RFM） were applied. The new hardware layout and enhanced performance are reported. Newly implemented PCS control algorithms for gas control and real-time data display are also presented.展开更多
Rotavirus(RV) is a major foodborne pathogen. For RV prevention and control, it is a key to uncover the interaction mechanism between virus and its receptors. However, it is hard to specially purify the viral receptors...Rotavirus(RV) is a major foodborne pathogen. For RV prevention and control, it is a key to uncover the interaction mechanism between virus and its receptors. However, it is hard to specially purify the viral receptors, including histo-blood group antigens(HBGAs). Previously, the protruding domain protein(P protein) of human norovirus(genotype Ⅱ.4) was displayed on the surface of Escherichia coli, and it specifically recognized and captured the viral ligands. In order to further verify the feasibility of the system, P protein was replaced by VP8* of RV(G9 P[8]) in this study. In the system, VP8*could be correctly released by thrombin treatment with antigenicity retaining, which was confirmed by Western blot and Enzyme-Linked Immunosorbent Assays. Type A HBGAs from porcine gastric mucin(PGM) were recognized and captured by this system. From saliva mixture, the captured viral receptor bound with displayed VP8* was confirmed positive with monoclonal antibody against type A HBGAs. It indicated that the target ligands could be easily separated from the complex matrix. These results demonstrate that the bacterial surface display system will be an effective platform to explore viral receptors/ligands from cell lines or food matrix.展开更多
Based on a robotic telesurgery system whose function is to liberate doctor from X-ray radiation, a robotic tele-drill system is constructed. The system is in client/server structure. Client part includes main control ...Based on a robotic telesurgery system whose function is to liberate doctor from X-ray radiation, a robotic tele-drill system is constructed. The system is in client/server structure. Client part includes main control interface, video-audio interface and predictive display interface. Server part includes robot control server and video, audio server. For applying to teleoperation, a virtual reality environment of the system developed by using Java, Java 3D, Pro/E, etc. is established. The geometry and kinematics model of serial robot MOTOMAN sv3x, parallel robot, C-type arm and X-ray machine, surgery bed and its work environment are fulfilled in it. Simulation engine and its simulation syntax are finished, which made the environment controllable. This environment is used as predictive display interface in the telerobotics in order to tackling the problem in visualization feedback as ambiguous or time delay. Experiments that verified feasibility of the system have been done.展开更多
In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configur...In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configuration service are proposed. It has been designed to support both stored and live broadcast/broadband content, in mosaic or warp distributions. The displays and devices can be dynamically configured via web in different ways: the displays can create a single display of a larger size;or they can be configured in a customized way in order to playout different media contents in different display combinations. As display renderers, low-cost devices are proposed as the main hardware element to obtain affordable videowall systems. As a proof of concept, two prototypes have been implemented, including an accurate synchronization mechanism based on a Master/Slave control scheme and aggressive and smooth playout adjustment techniques. To evidence the good performance of the prototypes and configuration service, both objective and subjective evaluations have been conducted regarding synchronization accuracy and usability. On the one hand, the mean values of the asynchronies between the video playout processes in each display are kept below 25ms (i.e., frame accuracy). On the other hand, the obtained usability score in the System Usability Scale (SUS) test has been 88.65, which is considered as excellent.展开更多
基金supported by the 111 Project(No.111-2-06)National Natural Science Foundation of China(32001064)+2 种基金Key Research and Development Program of China(2021YFC2100102-03)China Postdoctoral Science Foundation(2020M671331)Postgraduate Research and Practice Innovation Program of Jiangsu Province(No.KYCX20-1807).
文摘The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisiae,three of which[(suppression of exponential defect protein,SED1),(cell wall protein 2,CWP2)and(delayed anaerobic protein 4,DAN4)]were reported to show higher activity of heterologous proteins thanα-agglutinin(AGα1).The performance of yeast-enhanced green fluorescent protein(yeGFP)was evaluated using laser scanning confocal microscopy and flow cytometry.The results showed that the three anchoring regions(SED1,CWP2 and AGα1)successfully displayed yeGFP on the cell wall.To investigate the effect of the three anchoring proteins on the surface display of Rhizopus oryzaeα-amylase(ROA1)and Aspergillus aculeatusβ-glucosidase(BGL1)in C.tropicalis,we constructed surface display gene cassettes for ROA1 and BGL1,respectively.The strains containing the anchoring proteins SED1 and CWP2 showed higher activity of ROA1 and BGL1 than the strains containing the anchoring protein AGα1.The highest ROA1 and BGL1 activities of strains with SED1 were 6.37 U/g CDW and 7.93 U/g CDW,respectively,which were sixfold and eightfold higher than those of strain with AGα1.In addition,we also optimized signal peptides.The results indicated that signal peptides have an impact on enzyme activity.
文摘A novel volumetric three-dimensional（3-D） display system is developed based on the human eye persistence and the system fuses a time-series of image slices into a single hologram like 3-D aerial image. The system design is introduced and key components are described. Experimental results show that the 3-D system can guide people freely walk around the display to inspect the true 3-D image without goggles.
文摘This paper describes a virtual environment, which can present dynamic force transformation during the control of objects. A 5-DOF haptic interface with the capability to generate kinesthetic effect is combined. In this system, the operator manipulates an object in a virtual environment by using the 5-DOF master arm. When contacting with the virtual object, the contact force can be calculated and shown in the graphic interface. The contact response and deformation of the virtual object, which are usually called haptic rendering, also can be performed. The study supplies an approach to improve the operator’s immersion and can be used in many tele-robot control fields.
基金Supported by the National High Technology Research and Development Program of China(″863″Program)(2007AA01Z338)the National Science Foundation for Post-doctoral Scientists of China(20080441051)the Jiangsu Province Science Foundation for Post-doctoral Scientists(0802014c)~~
文摘Based on the helix rotating screen and the digital micro-mirror device （DMD）, the former proto of volumetric-swept display system is improved. The 3-D display system adopting a helix rotating screen to construct an imaging space meliorate the defects, such as the smaller image space, the fewer voxels and the severer voxel overlap dead zone caused by planar rotating screen. DMD with spatial light modular （SLM） technology increases the transmission bandwidth of 3-D data in the voxel activation subsystem and activate multi-voxel once time. The volumetric-swept system based on helix rotating screen and DMD is developed. The experimental results show that the image space, the vision dead zone, the voxels on slice, and the voxel activation capacity of the designed proto are superior to the plane rotating screen system.
文摘This paper describes a technology of dynamic display moving image by computer monitor,which is initially used in the design of tool detection system. The paper presents the hardware and software principie and edge detection process. The way of marking edge point coordinates and stability of moving image also is analyzed. The method reforms the conventional design of the 2-D vision detection system. Moreover,it facilitates the design of the systematic mechanical construction,is convenient to compile instrument systemsoftware,and realizes to detect and track display image simultaneously. By the work,the tool detection system is improved to practical application.
文摘As the sunlight scattered on the sea of Guanyinshan in Xiamen,a space that bridges creativity and industry opened its door to the world.On December 15th,following a ribbon-cutting and unveiling ceremony,YKK Xiamen Guanyinshan Showroom,the brand's second and largest comprehensive showroom,was officially inaugurated.This showroom is more than a product display window,it is an"Inspiration Hub"integrating exhibition,co-creation,and service.Its launch signifies YKK's progression in the Chinese market from“building an efficient product proposal system”to a new stage of“deep collaborative co-creation.”
基金supported by the National Natural Science Foundation of China(Nos.12175321,W2443004,11975021,11675275,U1932101)Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA10010900)+2 种基金National Key Research and Development Program of China(Nos.2023YFA1606000 and 2020YFA0406400)National College Students Science and Technology Innovation ProjectUndergraduate Base Scientific Research Project of Sun Yat-sen University。
文摘Detector and event visualization are crucial components of high-energy physics(HEP)experimental software.Virtual reality(VR)technologies and multimedia development platforms,such as Unity,offer enhanced display effects and flexible extensibility for visualization in HEP experiments.In this study,we present a VR-based method for detector and event displays in the Jiangmen Underground Neutrino Observatory(JUNO)experiment.This method shares the same detector geometry descriptions and event data model as those in the offline software and provides the necessary data conversion interfaces.The VR methodology facilitates an immersive exploration of the virtual environment in JUNO,enabling users to investigate the detector geometry,visualize event data,and tune the detector simulation and event reconstruction algorithms.Additionally,this approach supports applications in data monitoring,physics data analysis,and public outreach initiatives.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB3607300)the National Natural Science Foundation of China(Grant Nos.62322512,62225506,and 12134013)+7 种基金the Fundamental Research Funds for the Central Universities(Grant Nos.WK2030000108 and WK2030000090)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-049)supported by the National Natural Science Foundation of China(Grant Nos.12174260 and 12574326)the Shanghai Rising-Star Program(Grant No.21QA1406400)the Shanghai Science and Technology Development Fund(Grant Nos.21ZR1443500 and 21ZR1443600)the support from the China Postdoctoral Science Foundation(Grant No.2023M743364)support from the Center for Micro and Nanoscale Research and Fabrication,University of Science and Technology of Chinasupported by the UPOLabs,which provided the experimental and technical support。
文摘Head-up displays(HUDs)are emerging as key components of intelligent vehicles,requiring wide-depth,large-area,and high-efficiency dynamic imaging,which remains difficult to realize with traditional refractive optics.Computer-generated holography(CGH)with diffraction optics offers a promising solution to these technical demands.However,CGH optimization based on the fast Fourier transform(FFT)faces limitations such as zero-padding redundancy,coupled sampling intervals,and incompatible near-and farfield propagation models.Here,we report a holography-based multiplane HUD using a matrix multiplication(MM)-assisted diffraction algorithm that restructures the Fresnel integral into two sequential matrix operations,thus eliminating zero-padding and enabling fully decoupled sampling between object and image planes.Compared with FFT-based angular spectrum methods,the MM approach significantly improves computational speed and memory efficiency for hologram design,which is validated by demonstrating dual-plane holography with a size ratio exceeding 100:1 and unified reconstruction across Fresnel and Fraunhofer regimes within a single computation.A prototype HUD system is demonstrated successfully to exhibit multiple-plane holographic virtual images that can be mixed with real-world objects at three independent planes.The technique might be one of the potential candidates for next-generation intelligent vehicle displays.
基金financial support received from the Shanghai Pujiang Program(23PJ1406500)。
文摘White Cyphochilus insulanus beetles,exhibiting both environmental camouflage display and radiative cooling functions,serve as a good prototype for biomimetic fabrication.As inspired,this work presents a femtosecond(fs)laser-based biomimetic fabrication strategy that takes full use of the synthesized radiative cooling nanomaterials for a groundbreaking stimuli-responsive infrared(IR)impressionistic camouflage display.The proposed technique is capable of readily transforming various substrates(quartz glass and metals including Ti,Al,Zr,and W)into self-assembled porous networks(aerogels)consisting of oxygen-vacancy-rich oxide nanoparticles.Surprisingly,the emissions of all as-prepared porous particle-networks in the radiative-cooling long-wavelength infrared(LWIR)band are above 95%,with the SiO_(2) aerogels reaching a maximum of 99.6%.Benefiting from the far-from-equilibrium thermodynamic kinetics,metastable phases of anatase TiO_(2),tetragonal zirconia(t-ZrO_(2)),and monoclinic WO_(3)(Pc)are synthesizable,opening up opportunities for exploring their optical applications.Taking the low-temperature metastable phase WO_(3)(Pc)as representative for systematic studies,it is found that(1)the ratio WO_(3)(Pc)phase to that of room-temperature phase of WO_(3)(P2_(1)/n)can be tailored by modulation of processing parameters;(2)laser synthesized aerogels with hybrid phases of WO_(3)(Pc)and WO_(3)(P2_(1)/n)have a brighter visible whiteness,higher visible/nearinfrared(NIR)spectral selectivity than the natural prototype of white Cyphochilus insulanus beetles but with comparable LWIR emittance.White WO_(3) aerogel in situ deposited during flexibly fs laser artistic patterning can blur the painting features due to its radiative cooling effect,allowing a colorful impressionistic IR display in the heating mode.What's more,invisible painting features concealed by the white deposited WO_(3) aerogel are clearly/faintly distinguishable by introducing external stimuli of a human hand and sample heating,respectively,catalyzing progress in optical encryption and selectively stimuli-responsive decryption display in the infrared band.
基金funded by the ‘‘twelfth five” National Key Technology Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2015BAK10B00)
文摘Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.
文摘Plant flowering and breeding characteristics are important for us to understand the reproduction of plant populations. In this paper, we studied the reproduction characteristics of Jatropha curcas in Yuanjiang County （23°36＇1＇4, 101°00＇E）, Yunnan Province. The plant produces flowers in dichasial inflorescences. Normally, the flowers are unisexual, and male and female flowers are produced in the same inflorescence. Only a few male flowers are produced in an inflorescence, and fruits are produced only through pollination between different flowers from the same or different plants. By the treatments of emasculation, bagging and artificial pollination in this experiment, there were few but same fruit set ratios when the inflorescences were emasculated, bagged, or bagged with net, except artificial pollination treatments, which showed that Jatropha curcas could produce fruit through apomixis but not wind pollination. When the inflorescences were unbagged, unemasculated and with free pollination treatments, or bagged, emasculated and with artificial cross-pollination treatments, or unbagged, emasculated and with free pollination treatments, there were many fruits produced. It showed that Jatropha curcas shows outcrossing, is self-compatible, and demanding for pollinators. Normally, the male flowers open first and a few flowers bloom in one day in a raceme. These flowers last a long time in bloom. However, a large number of female flowers open from the third to the fifth day, with some female flowers opening first in a few raceme. This shows a tendency to promote xenogamy and minimize geitonogamy.
文摘This paper introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the Performance Standards for ECDIS established by the International Maritime Organization (IMO) and the International Hydrographic Organization (IHO).It also describes the key features and the important functions of ECDIS.Then the future development of ECDIS in marine is discussed.
基金Project supported by the National Natural Science Foundation of China for Distinguished Young Scholars (No. 60225009)the Major Research Plan of China (No. 90405003)
文摘SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show, large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, SimWall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, SimWall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints, projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall soft- ware environment.
文摘The titl angle measurement system based on the ADXL345 of three-axis acceleration sensor is introduced, and the composition and working principle of the system are described. The MSP430F149 microcontroller of ultra-low power and high performance is adopted. Firstly, the voltage value which is proportional to the acceleration value is output by ADXL345 when the system is powered. Secondly, the voltage value is converted into the corresponding digital signal by AD converter of the sensor. Thirdly, the digital signal is transformed into the titl angle according to the arithmetic processing of the MSP430F149. Finally, the corresponding angle is displayed on the liquid crystal display （LCD） screen. Experimental results show that the design has high sensitivity and response speed compared with the conventional methods. It is suitable for practical engineering application because of simple structure, low cost and low power consumption.
基金supported by the National Basic Research Program of China (973 Program) (2010CB734104)
文摘A novel group decision-making （GDM） method based on intuitionistic fuzzy sets （IFSs） is developed to evaluate the ergonomics of aircraft cockpit display and control system （ACDCS）. The GDM process with four steps is discussed. Firstly, approaches are proposed to transform four types of common judgement representations into a unified expression by the form of the IFS, and the features of unifications are analyzed. Then, the aggregation operator called the IFSs weighted averaging （IFSWA） operator is taken to synthesize decision-makers’ （DMs’） preferences by the form of the IFS. In this operator, the DM’s reliability weights factors are determined based on the distance measure between their preferences. Finally, an improved score function is used to rank alternatives and to get the best one. An illustrative example proves the proposed method is effective to valuate the ergonomics of the ACDCS.
基金supported by National Natural Science Foundation of China(No.10835009)the Key Project of Knowledge Innovation Program of Chinese Academy of Sciences(No.KJCX3.SYW.N4)
文摘The EAST plasma control system （PCS） is in continuous development to satisfy the EAST experimental requirements. In order to realize low latency and distortion-free signal transmission between PCS and servo systems such as the poloidal field power supply, in-vessel coil power supply and real-time scope, reflective memory boards （RFM） were applied. The new hardware layout and enhanced performance are reported. Newly implemented PCS control algorithms for gas control and real-time data display are also presented.
基金the National Key Research and Development Program of China(2017YFF0210200)the National Natural Science Foundation of China(31772078).
文摘Rotavirus(RV) is a major foodborne pathogen. For RV prevention and control, it is a key to uncover the interaction mechanism between virus and its receptors. However, it is hard to specially purify the viral receptors, including histo-blood group antigens(HBGAs). Previously, the protruding domain protein(P protein) of human norovirus(genotype Ⅱ.4) was displayed on the surface of Escherichia coli, and it specifically recognized and captured the viral ligands. In order to further verify the feasibility of the system, P protein was replaced by VP8* of RV(G9 P[8]) in this study. In the system, VP8*could be correctly released by thrombin treatment with antigenicity retaining, which was confirmed by Western blot and Enzyme-Linked Immunosorbent Assays. Type A HBGAs from porcine gastric mucin(PGM) were recognized and captured by this system. From saliva mixture, the captured viral receptor bound with displayed VP8* was confirmed positive with monoclonal antibody against type A HBGAs. It indicated that the target ligands could be easily separated from the complex matrix. These results demonstrate that the bacterial surface display system will be an effective platform to explore viral receptors/ligands from cell lines or food matrix.
文摘Based on a robotic telesurgery system whose function is to liberate doctor from X-ray radiation, a robotic tele-drill system is constructed. The system is in client/server structure. Client part includes main control interface, video-audio interface and predictive display interface. Server part includes robot control server and video, audio server. For applying to teleoperation, a virtual reality environment of the system developed by using Java, Java 3D, Pro/E, etc. is established. The geometry and kinematics model of serial robot MOTOMAN sv3x, parallel robot, C-type arm and X-ray machine, surgery bed and its work environment are fulfilled in it. Simulation engine and its simulation syntax are finished, which made the environment controllable. This environment is used as predictive display interface in the telerobotics in order to tackling the problem in visualization feedback as ambiguous or time delay. Experiments that verified feasibility of the system have been done.
基金partially funded by "Vicerrectorado de Investigación de la Universitat Politècnica de València" under projects with references PAID-1121 and PAID-12-21
文摘In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configuration service are proposed. It has been designed to support both stored and live broadcast/broadband content, in mosaic or warp distributions. The displays and devices can be dynamically configured via web in different ways: the displays can create a single display of a larger size;or they can be configured in a customized way in order to playout different media contents in different display combinations. As display renderers, low-cost devices are proposed as the main hardware element to obtain affordable videowall systems. As a proof of concept, two prototypes have been implemented, including an accurate synchronization mechanism based on a Master/Slave control scheme and aggressive and smooth playout adjustment techniques. To evidence the good performance of the prototypes and configuration service, both objective and subjective evaluations have been conducted regarding synchronization accuracy and usability. On the one hand, the mean values of the asynchronies between the video playout processes in each display are kept below 25ms (i.e., frame accuracy). On the other hand, the obtained usability score in the System Usability Scale (SUS) test has been 88.65, which is considered as excellent.
