We report the LPG pair device that can be used as a pulse duplicator or an OCDMA encoder/decoder. Due to the ring core region of dispersion compensating fiber (DCF), we can shorten the device length by a third and obt...We report the LPG pair device that can be used as a pulse duplicator or an OCDMA encoder/decoder. Due to the ring core region of dispersion compensating fiber (DCF), we can shorten the device length by a third and obtain surrounding insensitive LPG devices.展开更多
In this paper,an efficient 8-channel 32Gbps RoF(Radio over Fiber)system incorporating Bessel Filter(8/32 RoFBF)has been demonstrated to reduce the impact of non-linear transmission effects,specifically Four-Wave Mixin...In this paper,an efficient 8-channel 32Gbps RoF(Radio over Fiber)system incorporating Bessel Filter(8/32 RoFBF)has been demonstrated to reduce the impact of non-linear transmission effects,specifically Four-Wave Mixing(FWM).The simulation results indicate that the proposed 8/32 RoF-BF system provides an optimum result w.r.t.channel spacing(75 GHz),input source power(0 dBm)and number of input channels(8).In comparison with the existing RoF system,the proposed 8/32 RoF-BF system has been validated analytically and it is found that the performance of the proposed system is in close proximity particularly in FWM sideband power reduction of the order of 4 dBm for the 8-channel 32Gbps RoF system.展开更多
The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics fi...The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics field, the use of Fiber Bragg Grating (FBG) was been proposed in recent research with different purpose of uses. However, the compensation of dispersion method of Fiber Bragg Grating (FBG) can boost significantly the system performance. This paper investigates the performance capacity improvement of adaptive Radio over Fiber system. The system design was performed using OptiSystem 7.0 software, which 10 Gb/s Non Return to Zero (NRZ) signal was launched into 50 Km Universal Mode Fiber and Fiber Bragg Grating was used as a compensator of dispersion before frequency up conversion. Therefore, the system performances were investigated by comparing the Bit Error Rate (BER) and Q-factors of Positive Intrinsic Negative (PIN) and Ultrafast Avalanche Photodiode (APD) as optical receivers. The Eye diagram analyzer showed acceptable improvement due to use of Fiber Bragg Grating as a compensator of dispersion.展开更多
A novel microstructure fiber （MF） structure is proposed for broadband dispersion compensation. Through manipulating the four air-hole parameters and the pitch, the broad band dispersion compensation MF can be effici...A novel microstructure fiber （MF） structure is proposed for broadband dispersion compensation. Through manipulating the four air-hole parameters and the pitch, the broad band dispersion compensation MF can be efficiently designed. The newly designed MF could compensate （to within 0.8%） the dispersion of 101 times of its length of standard single mode fiber over the entire 100-nm band centered on 1550 nm. The proposed design has been simulated through the finite difference beam propagation method, and the corresponding design procedures are also presented. OCIS codes： 060.2310, 060.2280.展开更多
In this paper, we simulate the effect of Polarization Mode Dispersion( PMD ) on 40 Gb/s dispersion compensation transmission system by resolving the coupled nonlinear Schrodinger equation, and calculate the perf...In this paper, we simulate the effect of Polarization Mode Dispersion( PMD ) on 40 Gb/s dispersion compensation transmission system by resolving the coupled nonlinear Schrodinger equation, and calculate the performance of system with different duty cycle order and chirp of the super Gaussian pulse. The results show that the performance of the system changes with these parameters, and there is a group of optimum parameters for the optimum performance of the system.展开更多
A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped...A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.展开更多
The Er-doped concentric-cores dispersion compensating fiber (EDDCF) has been demonstrated. The rare earth has been doped as a ring around the inner core. We have obtained 14-dB gain at 1550 nm (using 100-mW pump power...The Er-doped concentric-cores dispersion compensating fiber (EDDCF) has been demonstrated. The rare earth has been doped as a ring around the inner core. We have obtained 14-dB gain at 1550 nm (using 100-mW pump power and 980-nm wavelength) with dispersion of about -165 ps/(km·nm). It is useful for the optical fiber network where amplification as well as negative dispersion are necessary.展开更多
We have evaluated the gain characteristics of an erbium-doped broadband dual-core dispersion compensating fiber (DCF) to achieve a loss-less dispersion compensating module for long-haul G.652 fiber links.
The common and traditional method for optical dispersion compensation is concatenating the transmitting optical fiber by a compensating optical fiber having a high-negative dispersion coefficient. In this Letter, we t...The common and traditional method for optical dispersion compensation is concatenating the transmitting optical fiber by a compensating optical fiber having a high-negative dispersion coefficient. In this Letter, we take the opposite direction and show how an optical fiber with a high-positive dispersion coefficient is used for dispersion compensation. Our optical dispersion compensating structure is the optical implementation of an iterative algorithm in signal processing. The proposed dispersion compensating system is constructed by cascading a number of compensating sub-systems, and its compensation capability is improved by increasing the number of embedded sub-systems. We also show that the compensation capability is a trade-off between the transmission length and bandwidth. We use the simulation results to validate the performance of the introduced dispersion compensating module. Photonic crystal fibers with high-positive dispersion coefficients can be used for constructing the proposed optical dispersion compensating module.展开更多
We theoretically demonstrate that a properly designed single-period multi-phase-shifted fiber Bragg grating can be used as a dispersion compensator. An overlap-step-scan exposure method for this new device is investig...We theoretically demonstrate that a properly designed single-period multi-phase-shifted fiber Bragg grating can be used as a dispersion compensator. An overlap-step-scan exposure method for this new device is investigated and a tolerance analysis is given.展开更多
文摘We report the LPG pair device that can be used as a pulse duplicator or an OCDMA encoder/decoder. Due to the ring core region of dispersion compensating fiber (DCF), we can shorten the device length by a third and obtain surrounding insensitive LPG devices.
文摘In this paper,an efficient 8-channel 32Gbps RoF(Radio over Fiber)system incorporating Bessel Filter(8/32 RoFBF)has been demonstrated to reduce the impact of non-linear transmission effects,specifically Four-Wave Mixing(FWM).The simulation results indicate that the proposed 8/32 RoF-BF system provides an optimum result w.r.t.channel spacing(75 GHz),input source power(0 dBm)and number of input channels(8).In comparison with the existing RoF system,the proposed 8/32 RoF-BF system has been validated analytically and it is found that the performance of the proposed system is in close proximity particularly in FWM sideband power reduction of the order of 4 dBm for the 8-channel 32Gbps RoF system.
文摘The combination of Radio Frequency and Optical Fiber has resulted high capacity transmission at lower costs components and makes Radio over Fiber as a current trend of large broadband communication. In Fiber optics field, the use of Fiber Bragg Grating (FBG) was been proposed in recent research with different purpose of uses. However, the compensation of dispersion method of Fiber Bragg Grating (FBG) can boost significantly the system performance. This paper investigates the performance capacity improvement of adaptive Radio over Fiber system. The system design was performed using OptiSystem 7.0 software, which 10 Gb/s Non Return to Zero (NRZ) signal was launched into 50 Km Universal Mode Fiber and Fiber Bragg Grating was used as a compensator of dispersion before frequency up conversion. Therefore, the system performances were investigated by comparing the Bit Error Rate (BER) and Q-factors of Positive Intrinsic Negative (PIN) and Ultrafast Avalanche Photodiode (APD) as optical receivers. The Eye diagram analyzer showed acceptable improvement due to use of Fiber Bragg Grating as a compensator of dispersion.
基金This work was supported by the National Basic Research Program of China (No. 2003CB314900) the Key Grant Project of Chinese Ministry of Education (No. 104046)
文摘A novel microstructure fiber （MF） structure is proposed for broadband dispersion compensation. Through manipulating the four air-hole parameters and the pitch, the broad band dispersion compensation MF can be efficiently designed. The newly designed MF could compensate （to within 0.8%） the dispersion of 101 times of its length of standard single mode fiber over the entire 100-nm band centered on 1550 nm. The proposed design has been simulated through the finite difference beam propagation method, and the corresponding design procedures are also presented. OCIS codes： 060.2310, 060.2280.
文摘In this paper, we simulate the effect of Polarization Mode Dispersion( PMD ) on 40 Gb/s dispersion compensation transmission system by resolving the coupled nonlinear Schrodinger equation, and calculate the performance of system with different duty cycle order and chirp of the super Gaussian pulse. The results show that the performance of the system changes with these parameters, and there is a group of optimum parameters for the optimum performance of the system.
基金This work was supported by the National 973 Basic Research and Development Program of China (No. 2003CB314901), the National Natural Science Foundation of China (No. 60377026), the National "863" High Technology Project of China (No. 2003AA311070),
文摘A tunable polarization mode dispersion (PMD) compensator based on strain-ckirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.
文摘The Er-doped concentric-cores dispersion compensating fiber (EDDCF) has been demonstrated. The rare earth has been doped as a ring around the inner core. We have obtained 14-dB gain at 1550 nm (using 100-mW pump power and 980-nm wavelength) with dispersion of about -165 ps/(km·nm). It is useful for the optical fiber network where amplification as well as negative dispersion are necessary.
文摘We have evaluated the gain characteristics of an erbium-doped broadband dual-core dispersion compensating fiber (DCF) to achieve a loss-less dispersion compensating module for long-haul G.652 fiber links.
文摘The common and traditional method for optical dispersion compensation is concatenating the transmitting optical fiber by a compensating optical fiber having a high-negative dispersion coefficient. In this Letter, we take the opposite direction and show how an optical fiber with a high-positive dispersion coefficient is used for dispersion compensation. Our optical dispersion compensating structure is the optical implementation of an iterative algorithm in signal processing. The proposed dispersion compensating system is constructed by cascading a number of compensating sub-systems, and its compensation capability is improved by increasing the number of embedded sub-systems. We also show that the compensation capability is a trade-off between the transmission length and bandwidth. We use the simulation results to validate the performance of the introduced dispersion compensating module. Photonic crystal fibers with high-positive dispersion coefficients can be used for constructing the proposed optical dispersion compensating module.
文摘We theoretically demonstrate that a properly designed single-period multi-phase-shifted fiber Bragg grating can be used as a dispersion compensator. An overlap-step-scan exposure method for this new device is investigated and a tolerance analysis is given.
