This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activat...This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN mo...Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.展开更多
Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,i...Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.展开更多
For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchma...For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.展开更多
The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The result...The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.展开更多
Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically ...Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.展开更多
Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characte...Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.展开更多
Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-...Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-altitude environmental observation and target detection and tracking.Existing studies primarily focus on specific airspace regions,leaving critical gaps in understanding the effects of long dispersion times,wide altitude ranges,and variable atmospheric conditions on missile contrail clouds.To address these gaps,this article develops a numerical method based on the Lagrangian random walk model,which incorporates various velocity variation terms,including particle velocity caused by the difference of wind field,by the thermal motion of local gas molecules and by random collisions between contrail cloud particles to capture the influence of environmental wind fields,atmospheric conditions,and particle concentrations on the motion of contrail cloud particles.A general coordinate system aligned with the missile's flight trajectory is employed to represent particle distribution characteristics.The proposed method is in good agreement with the conducted experiments as well as with the available numerical simulations.The results demonstrate that the proposed model effectively simulates the dispersion state of contrail clouds,accurately reflecting the impact of large-scale wind field variations and altitude changes with high computational efficiency.Additionally,simulation results indicate that the increased distance between gas molecules in rarefied environments facilitates enhanced particle dispersion,while larger particles exhibit a faster dispersion rate due to their greater mass.展开更多
Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were freque...Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.展开更多
Existing studies indicate that gas hydrate-bearing formations exhibit notable seismic velocity dispersion and attenuation. The Shenhu area of the South China Sea hold significant gas hydrate resource potential;however...Existing studies indicate that gas hydrate-bearing formations exhibit notable seismic velocity dispersion and attenuation. The Shenhu area of the South China Sea hold significant gas hydrate resource potential;however, the relationship between seismic velocity dispersion, attenuation properties, and gas-hydrate saturation remains insufficiently understood. Furthermore, a significant mismatch exists between the real seismic angle gather near a well and the synthetic angle gather generated using the convolution method, and this discrepancy may arise from the seismic velocity dispersion and attenuation characteristics of the gas hydrate-bearing formations. In this paper, we develop a rock physics model that integrates White's and Dvorkin's models, accounting for varied types of gas-hydrate occurrence states,specifically tailored to the gas hydrate-bearing formations in the Shenhu area. This model is calibrated with well log data and employed to investigate how gas-hydrate saturation influences seismic velocity dispersion and attenuation. Numerical analysis reveals the coexistence of two types of gas-hydrate occurrence states in the region: high gas-hydrate saturation formations are dominated by loadbearing-type gas hydrate, and formations containing both gas hydrate and free gas may exhibit either load-bearing or pore-filling types. The seismic velocity dispersion and attenuation properties vary significantly depending on the gas-hydrate occurrence state. We further apply the proposed model to generate seismic velocity and attenuation logs at various frequencies. These logs are used in seismic forward modeling employing both the convolution method and the propagator matrix method. Well tie analysis indicates that the synthetic angle gather incorporating attenuation via the propagator matrix method aligns more closely with the real seismic angle gather than the convolution method. This study provides valuable insights into frequency-dependent amplitude versus offset(AVO) analysis and the seismic interpretation of gas hydrate-bearing formations in the South China Sea.展开更多
This study investigates the influence of microstructural homogeneity—characterized by crack-related parameters such as crack porosity,crack density,and crack aspect ratio—on the accuracy of models predicting saturat...This study investigates the influence of microstructural homogeneity—characterized by crack-related parameters such as crack porosity,crack density,and crack aspect ratio—on the accuracy of models predicting saturated wave velocities,including those based on Gassmann,Biot,and Mavko-Jizba theories,as well as their effects on wave dispersion.We measured P-and S-wave velocities in eight limestone samples under dry and saturated conditions at various pressures.Utilizing the measured dry velocities,we calculated crack-related parameters by integrating the differential effective medium method with the David and Zimmerman approach(DEM-DZ model).Our findings reveal that the quantity and distribution of crack aspect ratios significantly affect model performance and dispersion.When total porosity and crack porosity are comparable,predictions of saturated velocities improve,with reduced wave dispersion observed in samples exhibiting fewer cracks and higher aspect ratios.Among the models predicting saturated velocities,Gassmann's model displayed the highest prediction error,while Mavko-Jizba's model showed the greatest accuracy.We introduce the microstructure homogeneity coefficient(MHC),a nonlinear combination of total porosity and crack-related parameters,as a measure of wave dispersion.Results indicate that lower porosities and crack densities,combined with higher aspect ratios,correspond to higher MHC values,suggesting greater microstructural homogeneity and reduced wave dispersion.MHC values ranged from 22.67 for the most homogeneous sample to 5.81 for the most heterogeneous sample.This trend correlates with P-wave dispersion values of 0.016 for the homogeneous sample and 0.092 for the heterogeneous sample,as well as S-wave dispersion values of 0.009 and 0.092,respectively.展开更多
The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:...The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.展开更多
Polyvinylidene fluoride(PVDF)/garnet composite polymer electrolytes(CPEs) have shown great potential in the development of solid-state lithium metal batteries(SSLMBs) due to their excellent flexibility, high ionic con...Polyvinylidene fluoride(PVDF)/garnet composite polymer electrolytes(CPEs) have shown great potential in the development of solid-state lithium metal batteries(SSLMBs) due to their excellent flexibility, high ionic conductivity and superior mechanical strength.However, uneven dispersion of garnet fillers in CPEs would lead to deterioration of lithium metal batteries(LMBs) performance and severely limit their widespread application. Considering the rapidly growing research of addressing above-mentioned issue, herein, recent progress in the design and fabrication of uniformly dispersed fillers in PVDF/garnet CPEs for high-performance SSLMBs is summarized. We firstly analyze the mechanism for the aggregation of inorganic fillers, and provide a detailed introduction to the strategies for solving the uneven dispersion of nanoparticles in solid electrolytes. Moreover, we also comprehensively summarize their applications in PVDF/garnet electrolytes and their impact on the electrochemical performance of SSLMBs. Finally, the application challenges and future prospects of PVDF/garnet CPEs in SSLMBs were also proposed to promote their further development. It is anticipated that this review could inspire ongoing research interest in rational designing and fabricating novel CPEs for high-performance SSLMBs.展开更多
In Rayleigh wave exploration,the inversion of dispersion curves is a crucial step for obtaining subsurface stratigraphic information,characterized by its multi-parameter and multi-extremum nature.Local optimization al...In Rayleigh wave exploration,the inversion of dispersion curves is a crucial step for obtaining subsurface stratigraphic information,characterized by its multi-parameter and multi-extremum nature.Local optimization algorithms used in dispersion curve inversion are highly dependent on the initial model and are prone to being trapped in local optima,while classical global optimization algorithms often suffer from slow convergence and low solution accuracy.To address these issues,this study introduces the Osprey Optimization Algorithm(OOA),known for its strong global search and local exploitation capabilities,into the inversion of dispersion curves to enhance inversion performance.In noiseless theoretical models,the OOA demonstrates excellent inversion accuracy and stability,accurately recovering model parameters.Even in noisy models,OOA maintains robust performance,achieving high inversion precision under high-noise conditions.In multimode dispersion curve tests,OOA effectively handles higher modes due to its efficient global and local search capabilities,and the inversion results show high consistency with theoretical values.Field data from the Wyoming region in the United States and a landfill site in Italy further verify the practical applicability of the OOA.Comprehensive test results indicate that the OOA outperforms the Particle Swarm Optimization(PSO)algorithm,providing a highly accurate and reliable inversion strategy for dispersion curve inversion.展开更多
High-rise buildings form deep urban street canyons and restrict the dispersion of vehicle emissions,posing severe health risks to the public by aggravating roadside air quality.Field measurements are important for und...High-rise buildings form deep urban street canyons and restrict the dispersion of vehicle emissions,posing severe health risks to the public by aggravating roadside air quality.Field measurements are important for understanding the dispersion process of tailpipe emissions in street canyons,while a major challenge is the lack of a suitable tracer gas.Carbon dioxide(CO_(2)),which is safe to the public and inexpensive to obtain,can be reliably measured by existing gas analysers.This study investigated the suitability of using CO_(2)as a tracer gas for characterising vehicle emission dispersion in a real-world street canyon.The tracer gas was released via a line or point source,whose dispersion was characterised by a sensors network comprising low-cost air quality sensors.The results showed that the CO_(2)contained in the exhaust gas of a test vehicle itself had unmeasurable effect at roadsides.Both the line and point sources produced obvious CO_(2)level elevations at approximately 30 s after the test vehicle passed by.In addition,for both line and point sources,the CO_(2)elevations were much more distinct at the roadside next to tailpipe exit than the opposite side,and were higher at 0.8 m than 1.6 m above the ground.The present study demonstrated that using CO_(2)as a tracer gas is feasible for investigating vehicle emission dispersion in real-world street canyons.Future studies are needed to improve the gas release rate of the developed tracer gas systems for more reliable measurements and larger street canyons.展开更多
In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of p...In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of positive-negative(PN)junctions.Unlike piezoelectric phononic crystals,the coupled Bloch waves in PSC phononic crystals are attenuated due to their semiconductor properties,and thus the solution of Bloch waves becomes more complicated.The transfer matrix of the phononic crystal unit cell is obtained using the state transfer equation.By applying the Bloch theorem for periodic structures,the dispersion relation of the coupled Bloch waves is derived,and the dispersion,attenuation,and bandgap are obtained in the complex wave number domain.It is found that the influence of the PN junction cannot be neglected.Moreover,the effects of the PN junction under different apparent wave numbers and steady-state carrier concentrations are provided.This indicates the feasibility of adjusting the propagation characteristics of Bloch waves through the regulation of the PN heterojunction.展开更多
The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity...The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity(i.e.,dispersion) and elastic anisotropy parameters.The relevant knowledge is of great importance for geofluid discrimination and hydrocarbon exploration in the porous shale reservoirs.We derive the wave equations for a periodic layered transversely isotropy medium with a vertical axis of symmetry(VTI) concurrently with the annular cracks(PLPC medium) based on the periodic-layered model and anisotropic Biot's theory,which simultaneously incorporate the effects of microscopic squirt fluid flow,mesoscopic interlayer fluid flow and macroscopic global fluid flow.Notably,the microscopic squirt shorten fluid flow emerges between the annular-shaped cracks and stiff pores,which generates one attenuation peak.Specifically,we first establish the stress-strain relationship and pore fluid pressure in a PLPC medium,and then use them to derive the wave equations by means of the Newton's second law.The plane analysis is implemented on the wave equations to yield the analytic solutions for phase velocities and attenuation factors of four waves,namely,fast P-wave,slow P-wave,SV-wave and SH-wave,and the anisotropy parameters can be therefore computed.Simulation results show that P-wave velocity have three attenuation peaks throughout the full frequency band,which respectively correspond to the influences of interlayer flow,the squirt flow and the Biot flow.Through the results of seismic velocity dispersion and attenuation at different incident angles,we find that the WIFF mechanism also has a significant impact on the dispersion characteristics of elastic anisotropy parameters within the low-mid frequency band.Moreover,it is shown that several poroelastic parameters,such as layer thickness ratio,crack aspect ratio and crack density have notable influence on seismic dispersion and attenuation.We compare the proposed modeled velocities with that given by the existing theory to confirm its validity.Our formulas and result can provide a better understanding of wave propagation in PLPC medium by considering the unified impacts of micro-,meso-and macro-scale WIFF mechanisms,which potentially lays a theoretical basis of rock physics for seismic interpretation.展开更多
An innovative method of hot compression bonding is proposed in this work for the joining of 9Cr oxide dispersion strengthened(ODS)alloy and 9Cr reduced-activation ferritic/martensitic(RAFM)alloy.The microstructural ev...An innovative method of hot compression bonding is proposed in this work for the joining of 9Cr oxide dispersion strengthened(ODS)alloy and 9Cr reduced-activation ferritic/martensitic(RAFM)alloy.The microstructural evolution of the bonding interface was investigated by scanning electron microscopy(SEM),electron back-scattered diffraction(EBSD),and transmission electron microscopy(TEM).The results verify that the pinning effect of nano-oxides particles(NPs)in 9Cr ODS alloy significantly enhances its dynamic recrystallization(DRX)temperature and deformation resistance.Continuous DRX(CDRX)first occurred on the 9Cr RAFM alloy side,and the areas near the bonding interface were composed of recrystallized grains.With increasing strain,CDRX also showed up on the 9Cr ODS alloy side.Inevitable slight oxidation occurred at the bonding interface during the hot compression bonding(HCB)process,and the interfacial oxides transformed from initial coarse CrO to TiO and finally to Y-Ti-O nanoparticles with sizes comparable to pre-existing NPs dispersed in the 9Cr ODS alloy matrix.It is believed that interfacial oxide transformation and grain structure consistency contributed to the excellent interface healing of the two dissimilar alloy pieces.The effectiveness of the bonding was tested by tensile tests and fractography analysis,revealing that ideal metallurgical bonding could be achieved under a controlled strain level of 10%at 800℃ followed by soaking at 1000℃ for 4 h.展开更多
Electrochemical impedance spectroscopy(EIS)is a widely used technique to monitor the electrical properties of a catalyst under electrocatalytic conditions.Although it is extensively used for research in electrocatalys...Electrochemical impedance spectroscopy(EIS)is a widely used technique to monitor the electrical properties of a catalyst under electrocatalytic conditions.Although it is extensively used for research in electrocatalysis,its effectiveness and power have not been fully harnessed to elucidate complex interfacial processes.Herein,we use the frequency dispersion parameter,n,which is extracted from EIS measurements(C_(s)=af^(n+1),-2<n<-1),to describe the dispersion characteristics of capacitance and interfacial properties of Co_(3)O_(4) before the onset of oxygen evolution reaction(OER)in alkaline conditions.We first prove that the n-value is sensitive to the interfacial electronic changes associated with Co redox processes and surface reconstruction.The n-value decreases by increasing the specific/active surface area of the catalysts.We further modify the interfacial properties by changing different components,i.e.,replacing the proton with deuterium,adding ethanol as a new oxidant,and changing the cation in the electrolyte.Intriguingly,the n-value can identify different influences on the interfacial process of proton transfer,the decrease and blocking of oxidized Co species,and the interfacial water structure.We demonstrate that the n-value extracted from EIS measurements is sensitive to the kinetic isotope effect,electrolyte cation,adsorbate surface coverage of oxidized Co species,and the interfacial water structure.Thus,it can be helpful to differentiate the multiple factors affecting the catalyst interface.These findings convey that the frequency dispersion of capacitance is a convenient and useful method to uncover the interfacial properties under electrocatalytic conditions,which helps to advance the understanding of the interfaceactivity relationship.展开更多
基金Supported by“Continuation”Project of Excellent Doctors,Guangdong Basic and Applied Basic Research Foundation,No.2025A04J5082Guangdong Basic and Applied Basic Research Foundation,No.2024A1515011236.
文摘This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金supported by the Fundamental Research Funds for the Central Universities (No.2024JBZY021)the National Natural Science Foundation of China (No.61575018)。
文摘Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.
文摘Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.
文摘For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.
基金Project(52174239)supported by the National Natural Science Foundation of ChinaProject(2021YFC2902400)supported by the National Key R&D Program of China。
文摘The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.
基金supported in part by the National Natural Science Foundation of China under Grant 41874143 and Grant 42374163in part by the Key Program of Natural Science Foundation of Sichuan Province of China under Grant 2023NSFSC0019in part by the Central Funds Guiding the Local Science and Technology Development under Grant 2024ZYD0124.
文摘Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.
文摘Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.
文摘Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-altitude environmental observation and target detection and tracking.Existing studies primarily focus on specific airspace regions,leaving critical gaps in understanding the effects of long dispersion times,wide altitude ranges,and variable atmospheric conditions on missile contrail clouds.To address these gaps,this article develops a numerical method based on the Lagrangian random walk model,which incorporates various velocity variation terms,including particle velocity caused by the difference of wind field,by the thermal motion of local gas molecules and by random collisions between contrail cloud particles to capture the influence of environmental wind fields,atmospheric conditions,and particle concentrations on the motion of contrail cloud particles.A general coordinate system aligned with the missile's flight trajectory is employed to represent particle distribution characteristics.The proposed method is in good agreement with the conducted experiments as well as with the available numerical simulations.The results demonstrate that the proposed model effectively simulates the dispersion state of contrail clouds,accurately reflecting the impact of large-scale wind field variations and altitude changes with high computational efficiency.Additionally,simulation results indicate that the increased distance between gas molecules in rarefied environments facilitates enhanced particle dispersion,while larger particles exhibit a faster dispersion rate due to their greater mass.
基金supported by the National Institute of Environmental Research(NIER)funded by the Ministry of Environment(No.NIER-2019-04-02-039)supported by Particulate Matter Management Specialized Graduate Program through the Korea Environmental Industry&Technology Institute(KEITI)funded by the Ministry of Environment(MOE).
文摘Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.
基金supported by National Natural Science Foundation of China(W2431028,42122029)SINOPEC Fundamental Research Program(P24258)CNPC Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications(2022DQ0604-02).
文摘Existing studies indicate that gas hydrate-bearing formations exhibit notable seismic velocity dispersion and attenuation. The Shenhu area of the South China Sea hold significant gas hydrate resource potential;however, the relationship between seismic velocity dispersion, attenuation properties, and gas-hydrate saturation remains insufficiently understood. Furthermore, a significant mismatch exists between the real seismic angle gather near a well and the synthetic angle gather generated using the convolution method, and this discrepancy may arise from the seismic velocity dispersion and attenuation characteristics of the gas hydrate-bearing formations. In this paper, we develop a rock physics model that integrates White's and Dvorkin's models, accounting for varied types of gas-hydrate occurrence states,specifically tailored to the gas hydrate-bearing formations in the Shenhu area. This model is calibrated with well log data and employed to investigate how gas-hydrate saturation influences seismic velocity dispersion and attenuation. Numerical analysis reveals the coexistence of two types of gas-hydrate occurrence states in the region: high gas-hydrate saturation formations are dominated by loadbearing-type gas hydrate, and formations containing both gas hydrate and free gas may exhibit either load-bearing or pore-filling types. The seismic velocity dispersion and attenuation properties vary significantly depending on the gas-hydrate occurrence state. We further apply the proposed model to generate seismic velocity and attenuation logs at various frequencies. These logs are used in seismic forward modeling employing both the convolution method and the propagator matrix method. Well tie analysis indicates that the synthetic angle gather incorporating attenuation via the propagator matrix method aligns more closely with the real seismic angle gather than the convolution method. This study provides valuable insights into frequency-dependent amplitude versus offset(AVO) analysis and the seismic interpretation of gas hydrate-bearing formations in the South China Sea.
文摘This study investigates the influence of microstructural homogeneity—characterized by crack-related parameters such as crack porosity,crack density,and crack aspect ratio—on the accuracy of models predicting saturated wave velocities,including those based on Gassmann,Biot,and Mavko-Jizba theories,as well as their effects on wave dispersion.We measured P-and S-wave velocities in eight limestone samples under dry and saturated conditions at various pressures.Utilizing the measured dry velocities,we calculated crack-related parameters by integrating the differential effective medium method with the David and Zimmerman approach(DEM-DZ model).Our findings reveal that the quantity and distribution of crack aspect ratios significantly affect model performance and dispersion.When total porosity and crack porosity are comparable,predictions of saturated velocities improve,with reduced wave dispersion observed in samples exhibiting fewer cracks and higher aspect ratios.Among the models predicting saturated velocities,Gassmann's model displayed the highest prediction error,while Mavko-Jizba's model showed the greatest accuracy.We introduce the microstructure homogeneity coefficient(MHC),a nonlinear combination of total porosity and crack-related parameters,as a measure of wave dispersion.Results indicate that lower porosities and crack densities,combined with higher aspect ratios,correspond to higher MHC values,suggesting greater microstructural homogeneity and reduced wave dispersion.MHC values ranged from 22.67 for the most homogeneous sample to 5.81 for the most heterogeneous sample.This trend correlates with P-wave dispersion values of 0.016 for the homogeneous sample and 0.092 for the heterogeneous sample,as well as S-wave dispersion values of 0.009 and 0.092,respectively.
基金supported by department of Education of Liaoning Province(Natural Science,Strategic Industrialization Project)(LJ212410163061).
文摘The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.
基金financially supported by the National Key Research and Development Program of China(No.2020YFB1713500)the Natural Science Foundation of Henan Province(No.242300420021)Open Fund of State Key Laboratory of Advanced Refractories(No.SKLAR202210)
文摘Polyvinylidene fluoride(PVDF)/garnet composite polymer electrolytes(CPEs) have shown great potential in the development of solid-state lithium metal batteries(SSLMBs) due to their excellent flexibility, high ionic conductivity and superior mechanical strength.However, uneven dispersion of garnet fillers in CPEs would lead to deterioration of lithium metal batteries(LMBs) performance and severely limit their widespread application. Considering the rapidly growing research of addressing above-mentioned issue, herein, recent progress in the design and fabrication of uniformly dispersed fillers in PVDF/garnet CPEs for high-performance SSLMBs is summarized. We firstly analyze the mechanism for the aggregation of inorganic fillers, and provide a detailed introduction to the strategies for solving the uneven dispersion of nanoparticles in solid electrolytes. Moreover, we also comprehensively summarize their applications in PVDF/garnet electrolytes and their impact on the electrochemical performance of SSLMBs. Finally, the application challenges and future prospects of PVDF/garnet CPEs in SSLMBs were also proposed to promote their further development. It is anticipated that this review could inspire ongoing research interest in rational designing and fabricating novel CPEs for high-performance SSLMBs.
基金sponsored by China Geological Survey Project(DD20243193 and DD20230206508).
文摘In Rayleigh wave exploration,the inversion of dispersion curves is a crucial step for obtaining subsurface stratigraphic information,characterized by its multi-parameter and multi-extremum nature.Local optimization algorithms used in dispersion curve inversion are highly dependent on the initial model and are prone to being trapped in local optima,while classical global optimization algorithms often suffer from slow convergence and low solution accuracy.To address these issues,this study introduces the Osprey Optimization Algorithm(OOA),known for its strong global search and local exploitation capabilities,into the inversion of dispersion curves to enhance inversion performance.In noiseless theoretical models,the OOA demonstrates excellent inversion accuracy and stability,accurately recovering model parameters.Even in noisy models,OOA maintains robust performance,achieving high inversion precision under high-noise conditions.In multimode dispersion curve tests,OOA effectively handles higher modes due to its efficient global and local search capabilities,and the inversion results show high consistency with theoretical values.Field data from the Wyoming region in the United States and a landfill site in Italy further verify the practical applicability of the OOA.Comprehensive test results indicate that the OOA outperforms the Particle Swarm Optimization(PSO)algorithm,providing a highly accurate and reliable inversion strategy for dispersion curve inversion.
基金supported by the Environment and Conservation Fund(No.ECF 14/2018)of the Hong Kong SAR Government,China.
文摘High-rise buildings form deep urban street canyons and restrict the dispersion of vehicle emissions,posing severe health risks to the public by aggravating roadside air quality.Field measurements are important for understanding the dispersion process of tailpipe emissions in street canyons,while a major challenge is the lack of a suitable tracer gas.Carbon dioxide(CO_(2)),which is safe to the public and inexpensive to obtain,can be reliably measured by existing gas analysers.This study investigated the suitability of using CO_(2)as a tracer gas for characterising vehicle emission dispersion in a real-world street canyon.The tracer gas was released via a line or point source,whose dispersion was characterised by a sensors network comprising low-cost air quality sensors.The results showed that the CO_(2)contained in the exhaust gas of a test vehicle itself had unmeasurable effect at roadsides.Both the line and point sources produced obvious CO_(2)level elevations at approximately 30 s after the test vehicle passed by.In addition,for both line and point sources,the CO_(2)elevations were much more distinct at the roadside next to tailpipe exit than the opposite side,and were higher at 0.8 m than 1.6 m above the ground.The present study demonstrated that using CO_(2)as a tracer gas is feasible for investigating vehicle emission dispersion in real-world street canyons.Future studies are needed to improve the gas release rate of the developed tracer gas systems for more reliable measurements and larger street canyons.
基金Project supported by the National Natural Science Foundation of China(Nos.11872105,12072022,11911530176,and 12202039)。
文摘In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of positive-negative(PN)junctions.Unlike piezoelectric phononic crystals,the coupled Bloch waves in PSC phononic crystals are attenuated due to their semiconductor properties,and thus the solution of Bloch waves becomes more complicated.The transfer matrix of the phononic crystal unit cell is obtained using the state transfer equation.By applying the Bloch theorem for periodic structures,the dispersion relation of the coupled Bloch waves is derived,and the dispersion,attenuation,and bandgap are obtained in the complex wave number domain.It is found that the influence of the PN junction cannot be neglected.Moreover,the effects of the PN junction under different apparent wave numbers and steady-state carrier concentrations are provided.This indicates the feasibility of adjusting the propagation characteristics of Bloch waves through the regulation of the PN heterojunction.
基金sponsorship of the National Natural Science Foundation of China (U24B2020,42174139)。
文摘The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity(i.e.,dispersion) and elastic anisotropy parameters.The relevant knowledge is of great importance for geofluid discrimination and hydrocarbon exploration in the porous shale reservoirs.We derive the wave equations for a periodic layered transversely isotropy medium with a vertical axis of symmetry(VTI) concurrently with the annular cracks(PLPC medium) based on the periodic-layered model and anisotropic Biot's theory,which simultaneously incorporate the effects of microscopic squirt fluid flow,mesoscopic interlayer fluid flow and macroscopic global fluid flow.Notably,the microscopic squirt shorten fluid flow emerges between the annular-shaped cracks and stiff pores,which generates one attenuation peak.Specifically,we first establish the stress-strain relationship and pore fluid pressure in a PLPC medium,and then use them to derive the wave equations by means of the Newton's second law.The plane analysis is implemented on the wave equations to yield the analytic solutions for phase velocities and attenuation factors of four waves,namely,fast P-wave,slow P-wave,SV-wave and SH-wave,and the anisotropy parameters can be therefore computed.Simulation results show that P-wave velocity have three attenuation peaks throughout the full frequency band,which respectively correspond to the influences of interlayer flow,the squirt flow and the Biot flow.Through the results of seismic velocity dispersion and attenuation at different incident angles,we find that the WIFF mechanism also has a significant impact on the dispersion characteristics of elastic anisotropy parameters within the low-mid frequency band.Moreover,it is shown that several poroelastic parameters,such as layer thickness ratio,crack aspect ratio and crack density have notable influence on seismic dispersion and attenuation.We compare the proposed modeled velocities with that given by the existing theory to confirm its validity.Our formulas and result can provide a better understanding of wave propagation in PLPC medium by considering the unified impacts of micro-,meso-and macro-scale WIFF mechanisms,which potentially lays a theoretical basis of rock physics for seismic interpretation.
基金supported by the National Natural Science Foundation of China(Grant Nos.52233017,51774265,52301032,and 52173305)the National Key Research and Development Program(Grant No.2018YFA0702900)+2 种基金the National Science and Technology Major Project of China(Grant No.2019ZX06004010)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDC04000000)the LingChuang Research Project of China National Nuclear Corporation,CNNC Science Fund for Talented Young Scholars,the Program of CAS Interdisciplinary Innovation Team,and the Youth Innovation Promotion Association,CAS.
文摘An innovative method of hot compression bonding is proposed in this work for the joining of 9Cr oxide dispersion strengthened(ODS)alloy and 9Cr reduced-activation ferritic/martensitic(RAFM)alloy.The microstructural evolution of the bonding interface was investigated by scanning electron microscopy(SEM),electron back-scattered diffraction(EBSD),and transmission electron microscopy(TEM).The results verify that the pinning effect of nano-oxides particles(NPs)in 9Cr ODS alloy significantly enhances its dynamic recrystallization(DRX)temperature and deformation resistance.Continuous DRX(CDRX)first occurred on the 9Cr RAFM alloy side,and the areas near the bonding interface were composed of recrystallized grains.With increasing strain,CDRX also showed up on the 9Cr ODS alloy side.Inevitable slight oxidation occurred at the bonding interface during the hot compression bonding(HCB)process,and the interfacial oxides transformed from initial coarse CrO to TiO and finally to Y-Ti-O nanoparticles with sizes comparable to pre-existing NPs dispersed in the 9Cr ODS alloy matrix.It is believed that interfacial oxide transformation and grain structure consistency contributed to the excellent interface healing of the two dissimilar alloy pieces.The effectiveness of the bonding was tested by tensile tests and fractography analysis,revealing that ideal metallurgical bonding could be achieved under a controlled strain level of 10%at 800℃ followed by soaking at 1000℃ for 4 h.
基金Swiss National Science Foundation through its PRIM A grant(grant No.PR00P2_193111)the NCCR MARVEL,a National Centre of Competence in Researchfunded by the Swiss National Science Foundation。
文摘Electrochemical impedance spectroscopy(EIS)is a widely used technique to monitor the electrical properties of a catalyst under electrocatalytic conditions.Although it is extensively used for research in electrocatalysis,its effectiveness and power have not been fully harnessed to elucidate complex interfacial processes.Herein,we use the frequency dispersion parameter,n,which is extracted from EIS measurements(C_(s)=af^(n+1),-2<n<-1),to describe the dispersion characteristics of capacitance and interfacial properties of Co_(3)O_(4) before the onset of oxygen evolution reaction(OER)in alkaline conditions.We first prove that the n-value is sensitive to the interfacial electronic changes associated with Co redox processes and surface reconstruction.The n-value decreases by increasing the specific/active surface area of the catalysts.We further modify the interfacial properties by changing different components,i.e.,replacing the proton with deuterium,adding ethanol as a new oxidant,and changing the cation in the electrolyte.Intriguingly,the n-value can identify different influences on the interfacial process of proton transfer,the decrease and blocking of oxidized Co species,and the interfacial water structure.We demonstrate that the n-value extracted from EIS measurements is sensitive to the kinetic isotope effect,electrolyte cation,adsorbate surface coverage of oxidized Co species,and the interfacial water structure.Thus,it can be helpful to differentiate the multiple factors affecting the catalyst interface.These findings convey that the frequency dispersion of capacitance is a convenient and useful method to uncover the interfacial properties under electrocatalytic conditions,which helps to advance the understanding of the interfaceactivity relationship.
