Jetting-based bioprinting facilitates contactless drop-on-demand deposition of subnanoliter droplets at well-defined positions to control the spatial arrangement of cells,growth factors,drugs,and biomaterials in a hig...Jetting-based bioprinting facilitates contactless drop-on-demand deposition of subnanoliter droplets at well-defined positions to control the spatial arrangement of cells,growth factors,drugs,and biomaterials in a highly automated layer-by-layer fabrication approach.Due to its immense versatility,jetting-based bioprinting has been used for various applications,including tissue engineering and regenerative medicine,wound healing,and drug development.A lack of in-depth understanding exists in the processes that occur during jetting-based bioprinting.This review paper will comprehensively discuss the physical considerations for bioinks and printing conditions used in jetting-based bioprinting.We first present an overview of different jetting-based bioprinting techniques such as inkjet bioprinting,laser-induced forward transfer bioprinting,electrohydrodynamic jet bioprinting,acoustic bioprinting and microvalve bioprinting.Next,we provide an in-depth discussion of various considerations for bioink formulation relating to cell deposition,print chamber design,droplet formation and droplet impact.Finally,we highlight recent accomplishments in jetting-based bioprinting.We present the advantages and challenges of each method,discuss considerations relating to cell viability and protein stability,and conclude by providing insights into future directions of jetting-based bioprinting.展开更多
Based on the characteristics of parallel dispensers in automated picking system, an order-picking optimization problem is presented. Firstly, the working principle of parallel dispensers is introduced, which implies t...Based on the characteristics of parallel dispensers in automated picking system, an order-picking optimization problem is presented. Firstly, the working principle of parallel dispensers is introduced, which implies the time cost of picking each order is influenced by the order-picking sequence. So the order-picking optimization problem can be classified as a dynamic traveling salesman problem （TSP）. Then a mathematical model of the problem is established and an improved max-min ant system （MMAS） is adopted to solve the model. The improvement includes two aspects. One is that the initial assignment of ants depends on a probabilistic formula instead of a random deployment; the other is that the heuristic factor is expressed by the extra picking time of each order instead of the total. At last, an actual simulation is made on an automated picking system with parallel dispensers. The simulation results proved the optimization value and the validity of improvement on MMAS.展开更多
Slotting strategy heavily influences the throughput and operational cost of automated order picking system with multiple dispenser types, which is called the complex automated order picking system （CAOPS）. Existing ...Slotting strategy heavily influences the throughput and operational cost of automated order picking system with multiple dispenser types, which is called the complex automated order picking system （CAOPS）. Existing research either focuses on one aspect of the slotting optimization problem or only considers one part of CAOPS, such as the Low-volume Dispensers, to develop corresponding slotting strategies. In order to provide a comprehensive and systemic approach, a fluid-based slotting strategy is proposed in this paper. The configuration of CAOPS is presented with specific reference to its fast-picking and restocking subsystems. Based on extended fluid model, a nonlinear mathematical programming model is developed to determine the optimal volume allotted to each stock keeping unit （SKU） in a certain mode by minimize the restocking cost of that mode. Conclusion from the allocation model is specified for the storage modules of high-volume dispensers and low-volume dispensers. Optimal allocation of storage resources in the fast-picking area of CAOPS is then discussed with the aim of identifying the optimal space of each picking mode. The SKU assignment problem referring to the total restocking cost of CAOPS is analyzed and a greedy heuristic with low time complexity is developed according to the characteristics of CAOPS. Real life application from the tobacco industry is presented in order to exemplify the proposed slotting strategy and assess the effectiveness of the developed methodology. Entry-item-quantity （EIQ） based experiential solutions and proposed-model-based near-optimal solutions are compared. The comparison results show that the proposed strategy generates a savings of over 18% referring to the total restocking cost over one-year period. The strategy proposed in this paper, which can handle the multiple dispenser types, provides a practical quantitative slotting method for CAOPS and can help picking-system-designers make slotting decisions efficiently and effectively.展开更多
The life of impregnated Ba-W cathodes with a new construction have been evaluated using an accelerated life test at three different temperatures (1170℃,1130℃,1090℃) and constant current density (2A/cm^2).According ...The life of impregnated Ba-W cathodes with a new construction have been evaluated using an accelerated life test at three different temperatures (1170℃,1130℃,1090℃) and constant current density (2A/cm^2).According to the relationship of life with operating temperatures,an accelerated equation has been set up.The cathode life at normal operating temperature is deducted based on the accelerated equation.The results show that life of the novel cathode exceeds 190,000 hour at a current density of 2A/cm^2.展开更多
In order to obtain higher emission performance than that of a traditional M-type cathode, we have developed a new type impregnated dispenser cathode. The new cathode is impregnated with a new active substance with mol...In order to obtain higher emission performance than that of a traditional M-type cathode, we have developed a new type impregnated dispenser cathode. The new cathode is impregnated with a new active substance with molar ratio of 26BaO·29SrO·8Sc2O3 ·7CaO·Al2O3 . This paper introduces the emission performance, surface active material, and work function of the new cathode. At 1100℃B , the DC current density and pulse current density are 30.6±1.0 A/cm2 and 171.6±2.8 A/cm2 , respectively, 2.1 and 5.4 times of that of an M-type cathode. The work function of the new cathode is 1.668± 0.002 eV. High concentration O-Al-Sc-Sr-Ba and O-Al-Sc-Ba are found in the pores and at pore edges, respectively. By comparing the emission performances and surface characteristics of as-polished and as-cleaned cathodes, it is proposed that, the emission around pore ends forms the major part of the total emission for the new cathodes.展开更多
A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emis...A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emission current density and more uniform emission on the cathode surface.The cathode is suitable for using as an electron emitter for microwave tubes,especially magnetrons.展开更多
A new type of dispenser cathode with dual-layer (Os-W/Re) is developed. The cathode coated with Os-W/Re shows better emission performance than the cathode coated with Os-W alloy. X-ray Photoelectron Spectroscopy (XPS)...A new type of dispenser cathode with dual-layer (Os-W/Re) is developed. The cathode coated with Os-W/Re shows better emission performance than the cathode coated with Os-W alloy. X-ray Photoelectron Spectroscopy (XPS) spectra demonstrate that ternary alloy coating (Os-W-Re) formed on the surface of the cathode with dual-layer (Os-W/Re) after full activation is the major reason why it has better emission than the cathode with Os-W alloy. The surface of each variety of the cathode is characterized with Scanning Electron Microscope (SEM) before and after activation: the emitting surface of the cathode with Os-W alloy after ageing appeared non-adherence (flaking) in localized areas, which is one of the reasons for non-uniform emission. However, the surface of the cathode with dual-layer (Os-W/Re) does not present film peeling under the same conditions. Thus it ensures better emission uniformity and functional reliability for the dispenser cathode.展开更多
The problem of H2 output feedback control for generalized system with structural uncertainties is studied using linear matrix inequality approach. A sufficient condition Of linear matrix inequality is presented such t...The problem of H2 output feedback control for generalized system with structural uncertainties is studied using linear matrix inequality approach. A sufficient condition Of linear matrix inequality is presented such that the closed-loop system is stable and satisfies H2 performance for all admissible uncertainties. Furthermore, the solution of the controller is given. An H2 output feedback controller is designed in the airborne dispenser pitch channel, and the simulation results show that the controller is effective.展开更多
The radar cross section (RCS) of dispenser and its components is computed by graphical electromagnetic computing (GRECO) method, which bases on physical optics (PO) method. A satisfied agreement is gotten between comp...The radar cross section (RCS) of dispenser and its components is computed by graphical electromagnetic computing (GRECO) method, which bases on physical optics (PO) method. A satisfied agreement is gotten between computed and measured results outdoor. The results show that the main scattering source of the dispenser is the mirror reflecting of the body; in the most crucial nose-on region, the nose mirror reflecting plays important role; the corner reflecting is important to the fins' RCS. The corresponding measures to reduce dispenser's RCS are proposed. It is indicated that to reduce RCS, shaping should be adopts first, while aerodynamic characteristics and stealth characteristics should be considered synthetically during the design of dispenser.展开更多
Purpose: To evaluate the impact of training of dispensers on the process of case management of ARI at community pharmacies in context to history taking and provision of advice working at community pharmacies in Islama...Purpose: To evaluate the impact of training of dispensers on the process of case management of ARI at community pharmacies in context to history taking and provision of advice working at community pharmacies in Islamabad, Pakistan. Method: A randomized, controlled, blinded intervention study was designed and implemented. Before the implementation of intervention, a baseline study was performed to assess the process of case management for ARI at community pharmacies. The study population included all community pharmacy outlets in Islamabad. After data collection, data was analyzed. The result of the study revealed that the overall process of disease management of ARI at community pharmacies in Pakistan is not satisfactory. Pharmacies of Islamabad which were visited in pre intervention phase (118) were divided into two geographical regions A (intervention) and B (control). From which thirty pharmacies were selected randomly from each region. The targeted group of the interventions was drug sellers. Keeping in view the results of the base line study an educational intervention was designed to improve the case management of ARI at community pharmacies in Pakistan. Results: No significant difference (p ≤ 0.05) was seen in the process of history taking and advice provision in case of ARI management at community pharmacies between pre and post control groups. On the other hand significant difference in the process of history taking and provision of advice for ARI was observed in the intervention group before and after training. Conclusion: The study has highlighted that improvements in the current dispensing practices at community pharmacies are possible through appropriate educational interventions. The dispensers have the potential to provide fast and low cost healthcare to the masses in the country where the presence of doctors and qualified pharmacist is low;to date they are an untapped and underutilized source in the country.展开更多
The experimental results of studies of four kinds of cathode emitting intense electron beams are demonstrated under multi-pulsed mode based on an experimental setup including two multi-pulse high voltage sources.The t...The experimental results of studies of four kinds of cathode emitting intense electron beams are demonstrated under multi-pulsed mode based on an experimental setup including two multi-pulse high voltage sources.The tested cathodes include velvet,carbon fibers,carbon nano-tubes （CNTs） and dispenser cathodes.The results indicate that all four are able to emit multi-pulsed beams.For velvet,carbon fiber and CNTs,the electron induced cathode plasma emission may be the main process and this means that there are differences in beam parameters from pulse to pulse.For dispenser cathodes tested in the experiment,although there is a little difference from pulse to pulse for some reason,thermal-electric field emission may be the main process.展开更多
Background More and more Chinese drink hot water from water dispensers while many children were scalded due to this change. The present study aimed to propose a feasible strategy for prevention. Methods A retrospectiv...Background More and more Chinese drink hot water from water dispensers while many children were scalded due to this change. The present study aimed to propose a feasible strategy for prevention. Methods A retrospective study was conducted for all water dispensers related pediatric burns admitted to Changhai Hospital from January 2005 to December 2009. Results The number of new cases and incidences of pediatric burns due to hot water from water dispensers was significantly increasing year after year. In the total 238 involved cases, 175 cases happened on males and 78.9% were at the age of 1-4 years. The burn areas were mainly located in upper extremities. All water dispensers in the surveyed families had no isolate protection devices and 85.2% of their locations were easy for children to reach. Nearly half of the children were in the same room with their guardians when injured. Total 196 burned children were playing the taps of water dispensers before injured, unfortunately, 80.6% of them have not been stopped until burned. Conclusion As the kind of burns is quite serious and with bad outcome, some recommendations should be followed, such as buying water dispensers with protection devices, keeping children from touching them and so on.展开更多
Pinelliae Rhizoma(PR),known as Banxia in Chinese,Hange in Japanese,and Banha in Korean,is a renowned herbal medicine in East Asia derived from the dry tuber of Pinellia ternata(Thunb.)Breit.(PT).It is extensively util...Pinelliae Rhizoma(PR),known as Banxia in Chinese,Hange in Japanese,and Banha in Korean,is a renowned herbal medicine in East Asia derived from the dry tuber of Pinellia ternata(Thunb.)Breit.(PT).It is extensively utilized in dispensing granules,classical prescriptions,and herbal formulas to treat various conditions,including cough,infection,phlegm,nausea,asthma,and inflammation.Despite numerous studies on PR and its classical prescriptions over recent decades,a comprehensive synthesis of available evidence regarding its multifunctional roles and therapeutic potential is lacking.This review aims to address this gap by examining emerging evidence from metabonomics,preclinical studies,and clinical trials,while exploring potential trends and prospects for future research.A systematic literature search was conducted across six electronic databases,including Pub Med,Web of Science,Scopus,Science Direct,Wanfang,and China National Knowledge Infrastructure,to identify relevant articles on PR published until March 2023.PR contains 107 compounds with diverse pharmacological activities,including anti-inflammatory,immune regulatory,anti-viral,anti-cancer,anti-asthma,antitussive and expectorant,antioxidant,anti-obesity,anti-atherosclerosis,antimicrobial,emetic and anti-emetic,anti-convulsant and anti-epileptic,sedative and hypnotic,learning and memory enhancement,and anti-depressant effects.Metabonomic studies suggest that raw PR may exhibit cardiotoxicity and pregnancy toxicity while showing no apparent hepatorenal toxicity.However,limited pharmacokinetic investigations on PR constrain its clinical translation.Furthermore,clinical safety data on PR is scarce,with only four clinical trials assessing its positive effects in pediatric epilepsy,nausea and vomiting,soft tissue injury,and chronic sinus tract.This review aims to enhance understanding of PR and provide valuable information and recommendations for further research and development of herbal medicine.展开更多
This study aims to identify the causes of sensor jams and its impact on the operation of vending machines. The vending machine is a machine that automatically dispenses products such as drinks, tickets, sandwiches and...This study aims to identify the causes of sensor jams and its impact on the operation of vending machines. The vending machine is a machine that automatically dispenses products such as drinks, tickets, sandwiches and biscuits, by inserting change or credit card into the machine. This technological feat is due to the advent of sensors. A sensor is a part of the measurement chain, it receives the quantity to be measured and provides information directly linked to this quantity. However, these vending robots are faced with malfunctions linked to sensor jams. The identification of the jam phenomenon was possible thanks to the inspection and monitoring of the various sensors installed on the vending robot. And Cadence software was used to model, control and locate the jammed sensor(s). The various tests were carried out by setting the robot in motion to better understand the causes of the phenomenon. The jam is therefore the phenomenon which triggers the sensors permanently, which causes the automatic vending robot to stop functioning. And this jam was due to the presence of water droplets on the sensor or dirt. This presence of water droplets on the sensor is linked to an increase in temperature. Controlling the temperature and locating the jammed sensor has made it possible to considerably reduce jamming and its harmful effects on the vending machine robot.展开更多
To mitigate risks associated with the prescription examination,marking,dispensing,checking,and review of non-integral-dosage drugs in Pharmacy Intravenous Admixture Service(PIVAS),we formed a project team.Employing th...To mitigate risks associated with the prescription examination,marking,dispensing,checking,and review of non-integral-dosage drugs in Pharmacy Intravenous Admixture Service(PIVAS),we formed a project team.Employing the failure mode and effect analysis(FMEA)management method,we identified potential risks in four critical steps of the non-integral-dosage drug dispensing process within PIVAS drug management:prescription verification,mixed allocation,and verification.For each step,we assigned scores for severity,incidence,and detectability,subsequently calculating the Risk Priority Number(RPN)to prioritize identified risks.Targeted measures for improvement were developed for steps with the highest RPN values.A total of 31 risk factors were documented in the management of non-integral-dosage drugs,with the dispensing process being particularly vulnerable.Specific measures were devised for eight high RPN risks.Following a 3-month optimization and improvement period,RPN values and incidences of internal differences were significantly reduced.The implemented measures demonstrated effective risk control.Notably,we established a comprehensive conversion system for partial-dose drug dispensing,directly translating into a volume of suction fluid for dispensing personnel based on doctor orders.This eliminated the need for manual secondary calculations,thereby standardizing and automating the dispensing of non-integral-dosage drugs in PIVAS.Simultaneously,our project team conducted a dissolution test on 23 types of drugs with non-integral dosage,revealing that the solvent volume increased for 11 types after dissolution.The dosage conversion for partial dosage was recalibrated based on the volume of the final solution to ensure dosage accuracy.Through the application of failure mode and effect analysis,we systematically managed the risks associated with non-integral-dosage drugs in PIVAS.This approach addressed safety concerns in the dispensing process,reduced errors,and ensured the safe and precise administration of medication to patients.展开更多
This paper aims to thoroughly explore the teaching reform of Traditional Chinese Medicine(TCM)dispensing technology in higher vocational colleges,with a focus on the Traditional Chinese Medicine Skills Competition.By ...This paper aims to thoroughly explore the teaching reform of Traditional Chinese Medicine(TCM)dispensing technology in higher vocational colleges,with a focus on the Traditional Chinese Medicine Skills Competition.By analyzing the current teaching status and main challenges of TCM dispensing technology,and aligning with the requirements of the skills competition,a series of detailed and practical teaching reform measures are proposed.These measures are designed to comprehensively improve the teaching quality of TCM dispensing technology in higher vocational colleges,enhance students’practical skills and professional qualities,and ultimately meet the demand for high-quality,skilled talents in the field of TCM.展开更多
The aim of this paper is to highlight the role of pharmaceutical care at community pharmacies in Pakistan. The paper draws on the literature related to current dispensing practices at community pharmacies in developin...The aim of this paper is to highlight the role of pharmaceutical care at community pharmacies in Pakistan. The paper draws on the literature related to current dispensing practices at community pharmacies in developing countries as well as in Pakistan. There are approximately 63,000 community pharmacies in Pakistan, and according to an estimate, 80% of the medicines are being distributed through this channel to majority of the population. They often lack adequate facilities, staffing and equipments. Absence of pharmacists and their roles being performed by the non-qualified personnel working at community pharmacies are a common practice. There are 8102 pharmacists who are categorized as a category, 31,000 pharmacy technicians categorized in B & C category in the country. There is a shortage of pharmacists who could be engaged for ensuring good pharmacy practices. There are only ten percent of the total pharmacists who work at community pharmacies in the country according to the Pharmacy Council of Pakistan. All kind of medicines are freely available irrespective of their status as prescription or over the counter drugs. The paper highlights that the professional role of pharmacist in hospitals and community pharmacies is switching from dispensing and sale of drugs, to patient counselling. But, the concept of pharmaceutical care at community pharmacies has not been acknowledged yet in Pakistan. The process of prescription handling is poor and patients are often treated without a proper prescription. Prescription validation, drug labeling and patient counseling are the missing components in effective patient management at the community pharmacies. The paper concludes that although laws exist, but due to lack of accountability and weak regulatory framework their proper implementation is not witnessed. Moreover, due to lack of research and evidence related to problems in dispensing practices in healthcare system of Pakistan, the counteractive actions for resolving these problems are limited.展开更多
Al_2O_3–CaO–SiC-based ceramic composites with four different compositions were sintered at 1700℃ for 3 h in an air furnace. The phase analysis, microstructural characterization, and elemental composition determinat...Al_2O_3–CaO–SiC-based ceramic composites with four different compositions were sintered at 1700℃ for 3 h in an air furnace. The phase analysis, microstructural characterization, and elemental composition determination of the developed composites were performed by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), and energy-dispersive X-ray(EDAX) analysis, respectively. The shrinkage, thermal properties, and electrical resistivity of the composites were also studied. The experimental results showed the effects of adding silicon carbide and calcia to alumina on the thermal, electrical, and shrinkage properties of the resultant composites. Among the four investigated ceramic composites, the one composed of 99 wt% alumina, 0.5 wt% CaO, and 0.5 wt% SiC exhibited the best characteristics for use as a potting material in a dispenser cathode of a microwave tube. The material exhibited slight expansion instead of shrinkage during drying or firing. Other properties of the composite powder, such as its thermal properties and electrical resistivity, were comparable to those of a commercial alumina powder.展开更多
Correct drug labelling is central for ensuring proper drug dispensing and thus for patient safety. Labelling errors may result in adverse health outcomes. The objective of this study was, therefore, to assess the effe...Correct drug labelling is central for ensuring proper drug dispensing and thus for patient safety. Labelling errors may result in adverse health outcomes. The objective of this study was, therefore, to assess the effect of labelling on the quality of drug dispensing and patient knowledge about dispensed drugs in Jimma University model and specialized hospital outpatient Pharmacies. Individual packages with prescribed drugs were examined using pretested questionnaire and observational check lists during the dispensing process. Patients’ knowledge about drugs dispensed to them was assessed at the exit interview using a pretested questionnaire. Out of 743 prescribed drugs, 682 (91.8%) were dispensed to 426 patients. The average labelling score (range from 0 to 6) of dispensed drugs in Model and Outpatient pharmacy was 2.00 (95% CI 1.97 to 2.04) and 1.73 (95% CI 1.6 to 1.8) respectively, with overall average labelling score of 1.90 (95% CI 1.84 to 1.91). The average patient knowledge score (range from 0 t0 5) was 3.45 (95% CI 3.31 to 3.59) and 3.5 (95% CI 3.35 to 3.64) for model and outpatient pharmacy, respectively, while the overall average knowledge score was 3.46 (95% CI 3.37 to 3.57). Major labelling problems were absence of patient’s name and dose followed by frequency of administration, duration of treatment, and the reason for prescription. Literacy status of patients had a significant effect on their knowledge (p 0.05). We recommend that corrective measures targeting both, labelling and patients’ knowledge should be implemented to improve the patients’ safety and drug therapy adherence.展开更多
Parametric Accelerated Life Testing (ALT) was used to improve the reliability of ice-maker system with a fractured helix upper dispenser in field. By using bond graphs and state equations, a variety of mechanical load...Parametric Accelerated Life Testing (ALT) was used to improve the reliability of ice-maker system with a fractured helix upper dispenser in field. By using bond graphs and state equations, a variety of mechanical loads in the assembly were analyzed. The acceleration factor was derived from a generalized life-stress failure model with a new load concept. To reproduce the failure modes and mechanisms causing the fracture, new sample size equation was derived. The sample size equation with the acceleration factor also enabled the parametric accelerated life testing to quickly reproduce early failure in field. Consequently, the failure modes and mechanisms found were identical with those of the failed sample. The design of this testing should help an engineer uncover the design parameters affecting the reliability of fractured helix upper dispenser in field. By eliminating the design flaws, gaps and weldline, the B1 life of the redesign of helix upper dispenser is now guaranteed to be over 10 years with a yearly failure rate of 0.1% that is the reliability quantitative test specifications (RQ).展开更多
基金support from NTU Presidential Postdoctoral Fellowship.
文摘Jetting-based bioprinting facilitates contactless drop-on-demand deposition of subnanoliter droplets at well-defined positions to control the spatial arrangement of cells,growth factors,drugs,and biomaterials in a highly automated layer-by-layer fabrication approach.Due to its immense versatility,jetting-based bioprinting has been used for various applications,including tissue engineering and regenerative medicine,wound healing,and drug development.A lack of in-depth understanding exists in the processes that occur during jetting-based bioprinting.This review paper will comprehensively discuss the physical considerations for bioinks and printing conditions used in jetting-based bioprinting.We first present an overview of different jetting-based bioprinting techniques such as inkjet bioprinting,laser-induced forward transfer bioprinting,electrohydrodynamic jet bioprinting,acoustic bioprinting and microvalve bioprinting.Next,we provide an in-depth discussion of various considerations for bioink formulation relating to cell deposition,print chamber design,droplet formation and droplet impact.Finally,we highlight recent accomplishments in jetting-based bioprinting.We present the advantages and challenges of each method,discuss considerations relating to cell viability and protein stability,and conclude by providing insights into future directions of jetting-based bioprinting.
基金supported by National Natural Science Foundation of China (No.50175064)
文摘Based on the characteristics of parallel dispensers in automated picking system, an order-picking optimization problem is presented. Firstly, the working principle of parallel dispensers is introduced, which implies the time cost of picking each order is influenced by the order-picking sequence. So the order-picking optimization problem can be classified as a dynamic traveling salesman problem （TSP）. Then a mathematical model of the problem is established and an improved max-min ant system （MMAS） is adopted to solve the model. The improvement includes two aspects. One is that the initial assignment of ants depends on a probabilistic formula instead of a random deployment; the other is that the heuristic factor is expressed by the extra picking time of each order instead of the total. At last, an actual simulation is made on an automated picking system with parallel dispensers. The simulation results proved the optimization value and the validity of improvement on MMAS.
基金supported by China Scholarship Council (Grant No.2007102074)National Natural Science Foundation of China (Grant No.50175064)+2 种基金Georgia Institute of Technology Visiting Research EngineerProgram of the United States (Grant No. 2401247)Graduate InnovationFoundation of Shandong University, China (Grant No. yzc09066)Costal International Logistics Company of the United States (Project No.20080727)
文摘Slotting strategy heavily influences the throughput and operational cost of automated order picking system with multiple dispenser types, which is called the complex automated order picking system （CAOPS）. Existing research either focuses on one aspect of the slotting optimization problem or only considers one part of CAOPS, such as the Low-volume Dispensers, to develop corresponding slotting strategies. In order to provide a comprehensive and systemic approach, a fluid-based slotting strategy is proposed in this paper. The configuration of CAOPS is presented with specific reference to its fast-picking and restocking subsystems. Based on extended fluid model, a nonlinear mathematical programming model is developed to determine the optimal volume allotted to each stock keeping unit （SKU） in a certain mode by minimize the restocking cost of that mode. Conclusion from the allocation model is specified for the storage modules of high-volume dispensers and low-volume dispensers. Optimal allocation of storage resources in the fast-picking area of CAOPS is then discussed with the aim of identifying the optimal space of each picking mode. The SKU assignment problem referring to the total restocking cost of CAOPS is analyzed and a greedy heuristic with low time complexity is developed according to the characteristics of CAOPS. Real life application from the tobacco industry is presented in order to exemplify the proposed slotting strategy and assess the effectiveness of the developed methodology. Entry-item-quantity （EIQ） based experiential solutions and proposed-model-based near-optimal solutions are compared. The comparison results show that the proposed strategy generates a savings of over 18% referring to the total restocking cost over one-year period. The strategy proposed in this paper, which can handle the multiple dispenser types, provides a practical quantitative slotting method for CAOPS and can help picking-system-designers make slotting decisions efficiently and effectively.
文摘The life of impregnated Ba-W cathodes with a new construction have been evaluated using an accelerated life test at three different temperatures (1170℃,1130℃,1090℃) and constant current density (2A/cm^2).According to the relationship of life with operating temperatures,an accelerated equation has been set up.The cathode life at normal operating temperature is deducted based on the accelerated equation.The results show that life of the novel cathode exceeds 190,000 hour at a current density of 2A/cm^2.
基金Supported by the National Natural Science Foundation of China (No. 60871053)the Major State Basic Research Development Program of China (No. 2013CB328901)
文摘In order to obtain higher emission performance than that of a traditional M-type cathode, we have developed a new type impregnated dispenser cathode. The new cathode is impregnated with a new active substance with molar ratio of 26BaO·29SrO·8Sc2O3 ·7CaO·Al2O3 . This paper introduces the emission performance, surface active material, and work function of the new cathode. At 1100℃B , the DC current density and pulse current density are 30.6±1.0 A/cm2 and 171.6±2.8 A/cm2 , respectively, 2.1 and 5.4 times of that of an M-type cathode. The work function of the new cathode is 1.668± 0.002 eV. High concentration O-Al-Sc-Sr-Ba and O-Al-Sc-Ba are found in the pores and at pore edges, respectively. By comparing the emission performances and surface characteristics of as-polished and as-cleaned cathodes, it is proposed that, the emission around pore ends forms the major part of the total emission for the new cathodes.
文摘A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emission current density and more uniform emission on the cathode surface.The cathode is suitable for using as an electron emitter for microwave tubes,especially magnetrons.
基金Supported by the National Science Fund for Distinguished Young Scholars of China (No.60125104).
文摘A new type of dispenser cathode with dual-layer (Os-W/Re) is developed. The cathode coated with Os-W/Re shows better emission performance than the cathode coated with Os-W alloy. X-ray Photoelectron Spectroscopy (XPS) spectra demonstrate that ternary alloy coating (Os-W-Re) formed on the surface of the cathode with dual-layer (Os-W/Re) after full activation is the major reason why it has better emission than the cathode with Os-W alloy. The surface of each variety of the cathode is characterized with Scanning Electron Microscope (SEM) before and after activation: the emitting surface of the cathode with Os-W alloy after ageing appeared non-adherence (flaking) in localized areas, which is one of the reasons for non-uniform emission. However, the surface of the cathode with dual-layer (Os-W/Re) does not present film peeling under the same conditions. Thus it ensures better emission uniformity and functional reliability for the dispenser cathode.
基金Sponsored by the Ministerial Level Advanced Research Foundation (G423BQ0110)
文摘The problem of H2 output feedback control for generalized system with structural uncertainties is studied using linear matrix inequality approach. A sufficient condition Of linear matrix inequality is presented such that the closed-loop system is stable and satisfies H2 performance for all admissible uncertainties. Furthermore, the solution of the controller is given. An H2 output feedback controller is designed in the airborne dispenser pitch channel, and the simulation results show that the controller is effective.
文摘The radar cross section (RCS) of dispenser and its components is computed by graphical electromagnetic computing (GRECO) method, which bases on physical optics (PO) method. A satisfied agreement is gotten between computed and measured results outdoor. The results show that the main scattering source of the dispenser is the mirror reflecting of the body; in the most crucial nose-on region, the nose mirror reflecting plays important role; the corner reflecting is important to the fins' RCS. The corresponding measures to reduce dispenser's RCS are proposed. It is indicated that to reduce RCS, shaping should be adopts first, while aerodynamic characteristics and stealth characteristics should be considered synthetically during the design of dispenser.
文摘Purpose: To evaluate the impact of training of dispensers on the process of case management of ARI at community pharmacies in context to history taking and provision of advice working at community pharmacies in Islamabad, Pakistan. Method: A randomized, controlled, blinded intervention study was designed and implemented. Before the implementation of intervention, a baseline study was performed to assess the process of case management for ARI at community pharmacies. The study population included all community pharmacy outlets in Islamabad. After data collection, data was analyzed. The result of the study revealed that the overall process of disease management of ARI at community pharmacies in Pakistan is not satisfactory. Pharmacies of Islamabad which were visited in pre intervention phase (118) were divided into two geographical regions A (intervention) and B (control). From which thirty pharmacies were selected randomly from each region. The targeted group of the interventions was drug sellers. Keeping in view the results of the base line study an educational intervention was designed to improve the case management of ARI at community pharmacies in Pakistan. Results: No significant difference (p ≤ 0.05) was seen in the process of history taking and advice provision in case of ARI management at community pharmacies between pre and post control groups. On the other hand significant difference in the process of history taking and provision of advice for ARI was observed in the intervention group before and after training. Conclusion: The study has highlighted that improvements in the current dispensing practices at community pharmacies are possible through appropriate educational interventions. The dispensers have the potential to provide fast and low cost healthcare to the masses in the country where the presence of doctors and qualified pharmacist is low;to date they are an untapped and underutilized source in the country.
基金Supported by National Nature Science Foundation of China(10575090)State Key Laboratory of Advanced Materials (Beijing University of Science and Technology, 20082D-10)
文摘The experimental results of studies of four kinds of cathode emitting intense electron beams are demonstrated under multi-pulsed mode based on an experimental setup including two multi-pulse high voltage sources.The tested cathodes include velvet,carbon fibers,carbon nano-tubes （CNTs） and dispenser cathodes.The results indicate that all four are able to emit multi-pulsed beams.For velvet,carbon fiber and CNTs,the electron induced cathode plasma emission may be the main process and this means that there are differences in beam parameters from pulse to pulse.For dispenser cathodes tested in the experiment,although there is a little difference from pulse to pulse for some reason,thermal-electric field emission may be the main process.
文摘Background More and more Chinese drink hot water from water dispensers while many children were scalded due to this change. The present study aimed to propose a feasible strategy for prevention. Methods A retrospective study was conducted for all water dispensers related pediatric burns admitted to Changhai Hospital from January 2005 to December 2009. Results The number of new cases and incidences of pediatric burns due to hot water from water dispensers was significantly increasing year after year. In the total 238 involved cases, 175 cases happened on males and 78.9% were at the age of 1-4 years. The burn areas were mainly located in upper extremities. All water dispensers in the surveyed families had no isolate protection devices and 85.2% of their locations were easy for children to reach. Nearly half of the children were in the same room with their guardians when injured. Total 196 burned children were playing the taps of water dispensers before injured, unfortunately, 80.6% of them have not been stopped until burned. Conclusion As the kind of burns is quite serious and with bad outcome, some recommendations should be followed, such as buying water dispensers with protection devices, keeping children from touching them and so on.
基金funded by the Macao Science and Technology Development Fund(FDCT Nos.001/2023/ALC,0123/2022/A,0006/2020/AKP,and 005/2023/SKL)the Natural Science Foundation of Guangdong Province,China(No.2020A1515010922)+1 种基金the Shenzhen-Hong Kong-Macao S&T Program(Category C,No.SGDX2020110309420200)the Research Fund of University of Macao(Nos.MYRG-GRG2023-00198-ICMS,CPG2024-00038-ICMS and SRG2022-00052-ICMS)。
文摘Pinelliae Rhizoma(PR),known as Banxia in Chinese,Hange in Japanese,and Banha in Korean,is a renowned herbal medicine in East Asia derived from the dry tuber of Pinellia ternata(Thunb.)Breit.(PT).It is extensively utilized in dispensing granules,classical prescriptions,and herbal formulas to treat various conditions,including cough,infection,phlegm,nausea,asthma,and inflammation.Despite numerous studies on PR and its classical prescriptions over recent decades,a comprehensive synthesis of available evidence regarding its multifunctional roles and therapeutic potential is lacking.This review aims to address this gap by examining emerging evidence from metabonomics,preclinical studies,and clinical trials,while exploring potential trends and prospects for future research.A systematic literature search was conducted across six electronic databases,including Pub Med,Web of Science,Scopus,Science Direct,Wanfang,and China National Knowledge Infrastructure,to identify relevant articles on PR published until March 2023.PR contains 107 compounds with diverse pharmacological activities,including anti-inflammatory,immune regulatory,anti-viral,anti-cancer,anti-asthma,antitussive and expectorant,antioxidant,anti-obesity,anti-atherosclerosis,antimicrobial,emetic and anti-emetic,anti-convulsant and anti-epileptic,sedative and hypnotic,learning and memory enhancement,and anti-depressant effects.Metabonomic studies suggest that raw PR may exhibit cardiotoxicity and pregnancy toxicity while showing no apparent hepatorenal toxicity.However,limited pharmacokinetic investigations on PR constrain its clinical translation.Furthermore,clinical safety data on PR is scarce,with only four clinical trials assessing its positive effects in pediatric epilepsy,nausea and vomiting,soft tissue injury,and chronic sinus tract.This review aims to enhance understanding of PR and provide valuable information and recommendations for further research and development of herbal medicine.
文摘This study aims to identify the causes of sensor jams and its impact on the operation of vending machines. The vending machine is a machine that automatically dispenses products such as drinks, tickets, sandwiches and biscuits, by inserting change or credit card into the machine. This technological feat is due to the advent of sensors. A sensor is a part of the measurement chain, it receives the quantity to be measured and provides information directly linked to this quantity. However, these vending robots are faced with malfunctions linked to sensor jams. The identification of the jam phenomenon was possible thanks to the inspection and monitoring of the various sensors installed on the vending robot. And Cadence software was used to model, control and locate the jammed sensor(s). The various tests were carried out by setting the robot in motion to better understand the causes of the phenomenon. The jam is therefore the phenomenon which triggers the sensors permanently, which causes the automatic vending robot to stop functioning. And this jam was due to the presence of water droplets on the sensor or dirt. This presence of water droplets on the sensor is linked to an increase in temperature. Controlling the temperature and locating the jammed sensor has made it possible to considerably reduce jamming and its harmful effects on the vending machine robot.
基金Anhui Provincial Health Research Project Fund(Grant No.AHWJ2023-BAc20143)Pharmaceutical Research Exploration Fund of the First Affiliated Hospital of University of Science and Technology of China(Grant No.YJKJJ04)14th Five Year Plan Anhui Province Medical and Health Clinical Key Specialty Construction Project Support.
文摘To mitigate risks associated with the prescription examination,marking,dispensing,checking,and review of non-integral-dosage drugs in Pharmacy Intravenous Admixture Service(PIVAS),we formed a project team.Employing the failure mode and effect analysis(FMEA)management method,we identified potential risks in four critical steps of the non-integral-dosage drug dispensing process within PIVAS drug management:prescription verification,mixed allocation,and verification.For each step,we assigned scores for severity,incidence,and detectability,subsequently calculating the Risk Priority Number(RPN)to prioritize identified risks.Targeted measures for improvement were developed for steps with the highest RPN values.A total of 31 risk factors were documented in the management of non-integral-dosage drugs,with the dispensing process being particularly vulnerable.Specific measures were devised for eight high RPN risks.Following a 3-month optimization and improvement period,RPN values and incidences of internal differences were significantly reduced.The implemented measures demonstrated effective risk control.Notably,we established a comprehensive conversion system for partial-dose drug dispensing,directly translating into a volume of suction fluid for dispensing personnel based on doctor orders.This eliminated the need for manual secondary calculations,thereby standardizing and automating the dispensing of non-integral-dosage drugs in PIVAS.Simultaneously,our project team conducted a dissolution test on 23 types of drugs with non-integral dosage,revealing that the solvent volume increased for 11 types after dissolution.The dosage conversion for partial dosage was recalibrated based on the volume of the final solution to ensure dosage accuracy.Through the application of failure mode and effect analysis,we systematically managed the risks associated with non-integral-dosage drugs in PIVAS.This approach addressed safety concerns in the dispensing process,reduced errors,and ensured the safe and precise administration of medication to patients.
文摘This paper aims to thoroughly explore the teaching reform of Traditional Chinese Medicine(TCM)dispensing technology in higher vocational colleges,with a focus on the Traditional Chinese Medicine Skills Competition.By analyzing the current teaching status and main challenges of TCM dispensing technology,and aligning with the requirements of the skills competition,a series of detailed and practical teaching reform measures are proposed.These measures are designed to comprehensively improve the teaching quality of TCM dispensing technology in higher vocational colleges,enhance students’practical skills and professional qualities,and ultimately meet the demand for high-quality,skilled talents in the field of TCM.
文摘The aim of this paper is to highlight the role of pharmaceutical care at community pharmacies in Pakistan. The paper draws on the literature related to current dispensing practices at community pharmacies in developing countries as well as in Pakistan. There are approximately 63,000 community pharmacies in Pakistan, and according to an estimate, 80% of the medicines are being distributed through this channel to majority of the population. They often lack adequate facilities, staffing and equipments. Absence of pharmacists and their roles being performed by the non-qualified personnel working at community pharmacies are a common practice. There are 8102 pharmacists who are categorized as a category, 31,000 pharmacy technicians categorized in B & C category in the country. There is a shortage of pharmacists who could be engaged for ensuring good pharmacy practices. There are only ten percent of the total pharmacists who work at community pharmacies in the country according to the Pharmacy Council of Pakistan. All kind of medicines are freely available irrespective of their status as prescription or over the counter drugs. The paper highlights that the professional role of pharmacist in hospitals and community pharmacies is switching from dispensing and sale of drugs, to patient counselling. But, the concept of pharmaceutical care at community pharmacies has not been acknowledged yet in Pakistan. The process of prescription handling is poor and patients are often treated without a proper prescription. Prescription validation, drug labeling and patient counseling are the missing components in effective patient management at the community pharmacies. The paper concludes that although laws exist, but due to lack of accountability and weak regulatory framework their proper implementation is not witnessed. Moreover, due to lack of research and evidence related to problems in dispensing practices in healthcare system of Pakistan, the counteractive actions for resolving these problems are limited.
基金financial support of Council of Scientific and Industrial Research (CSIR), India Through network Project (No. MTDDC-PSC0101)
文摘Al_2O_3–CaO–SiC-based ceramic composites with four different compositions were sintered at 1700℃ for 3 h in an air furnace. The phase analysis, microstructural characterization, and elemental composition determination of the developed composites were performed by X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), and energy-dispersive X-ray(EDAX) analysis, respectively. The shrinkage, thermal properties, and electrical resistivity of the composites were also studied. The experimental results showed the effects of adding silicon carbide and calcia to alumina on the thermal, electrical, and shrinkage properties of the resultant composites. Among the four investigated ceramic composites, the one composed of 99 wt% alumina, 0.5 wt% CaO, and 0.5 wt% SiC exhibited the best characteristics for use as a potting material in a dispenser cathode of a microwave tube. The material exhibited slight expansion instead of shrinkage during drying or firing. Other properties of the composite powder, such as its thermal properties and electrical resistivity, were comparable to those of a commercial alumina powder.
文摘Correct drug labelling is central for ensuring proper drug dispensing and thus for patient safety. Labelling errors may result in adverse health outcomes. The objective of this study was, therefore, to assess the effect of labelling on the quality of drug dispensing and patient knowledge about dispensed drugs in Jimma University model and specialized hospital outpatient Pharmacies. Individual packages with prescribed drugs were examined using pretested questionnaire and observational check lists during the dispensing process. Patients’ knowledge about drugs dispensed to them was assessed at the exit interview using a pretested questionnaire. Out of 743 prescribed drugs, 682 (91.8%) were dispensed to 426 patients. The average labelling score (range from 0 to 6) of dispensed drugs in Model and Outpatient pharmacy was 2.00 (95% CI 1.97 to 2.04) and 1.73 (95% CI 1.6 to 1.8) respectively, with overall average labelling score of 1.90 (95% CI 1.84 to 1.91). The average patient knowledge score (range from 0 t0 5) was 3.45 (95% CI 3.31 to 3.59) and 3.5 (95% CI 3.35 to 3.64) for model and outpatient pharmacy, respectively, while the overall average knowledge score was 3.46 (95% CI 3.37 to 3.57). Major labelling problems were absence of patient’s name and dose followed by frequency of administration, duration of treatment, and the reason for prescription. Literacy status of patients had a significant effect on their knowledge (p 0.05). We recommend that corrective measures targeting both, labelling and patients’ knowledge should be implemented to improve the patients’ safety and drug therapy adherence.
文摘Parametric Accelerated Life Testing (ALT) was used to improve the reliability of ice-maker system with a fractured helix upper dispenser in field. By using bond graphs and state equations, a variety of mechanical loads in the assembly were analyzed. The acceleration factor was derived from a generalized life-stress failure model with a new load concept. To reproduce the failure modes and mechanisms causing the fracture, new sample size equation was derived. The sample size equation with the acceleration factor also enabled the parametric accelerated life testing to quickly reproduce early failure in field. Consequently, the failure modes and mechanisms found were identical with those of the failed sample. The design of this testing should help an engineer uncover the design parameters affecting the reliability of fractured helix upper dispenser in field. By eliminating the design flaws, gaps and weldline, the B1 life of the redesign of helix upper dispenser is now guaranteed to be over 10 years with a yearly failure rate of 0.1% that is the reliability quantitative test specifications (RQ).
