The biggest challenge for organic phase change materials(PCMs)used in cold energy storage is to maintain high heat storage capacity while reducing the leakage risk of PCMs during the phase transition process.This is c...The biggest challenge for organic phase change materials(PCMs)used in cold energy storage is to maintain high heat storage capacity while reducing the leakage risk of PCMs during the phase transition process.This is crucial for expanding their applications in the more demanding cold storage field.In this study,novel formstable low-temperature composite PCMs are prepared with mesoporous materials,namely SBA-15 and CMK-3(which are prepared using the template method),as supporting matrices and dodecane as the PCM.Owing to the combined effects of capillary forces within mesoporous materials and interactions among dodecane molecules,both dodecane/SBA-15 and dodecane/CMK-3 exhibit outstanding shape stability and thermal cycling stability even after 200 heating/cooling cycles.In comparison to those of dodecane/SBA-15,dodecane/CMK-3 exhibits superior cold storage performance and higher thermal conductivity.Specifically,the phase transition temperature of dodecane/CMK-3 is-8.81℃ with a latent heat of 122.4 J·g^(-1).Additionally,it has a thermal conductivity of 1.21 W·m^(-1)·K^(-1),which is 9.45 times that of dodecane alone.All these highlight its significant potential for applications in the area of cold energy storage.展开更多
Although lithium-ion batteries(LIBs)currently dominate a wide spectrum of energy storage applications,they face challenges such as fast cycle life decay and poor stability that hinder their further application.To addr...Although lithium-ion batteries(LIBs)currently dominate a wide spectrum of energy storage applications,they face challenges such as fast cycle life decay and poor stability that hinder their further application.To address these limitations,element doping has emerged as a prevalent strategy to enhance the discharge capacity and extend the durability of Li-Ni-Co-Mn(LNCM)ternary compounds.This study utilized a machine learning-driven feature screening method to effectively pinpoint four key features crucially impacting the initial discharge capacity(IC)of Li-Ni-Co-Mn(LNCM)ternary cathode materials.These features were also proved highly predictive for the 50^(th)cycle discharge capacity(EC).Additionally,the application of SHAP value analysis yielded an in-depth understanding of the interplay between these features and discharge performance.This insight offers valuable direction for future advancements in the development of LNCM cathode materials,effectively promoting this field toward greater efficiency and sustainability.展开更多
LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity...LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity decay,and poor cycling performance in conventional lithium-ion battery cathode materials.The charge-discharge processes of LVO span multiple platforms,delivering an impressive specific discharge capacity of 219.4 mAh.g^(-1) at 1C.Remarkably,LVO exhibits a high-capacity retention rate of 81.3%after 800 cycles within the typical operating voltage range of lithium-ion batteries(2.8-4.3V).Rate capability tests and electrochemical impedance spectroscopy(EIS)reveal that,compared to traditional cathode materials,LVO significantly enhances Li*diffusion rates(D_(Li*))and reduces charge transfer resistance(Ret).展开更多
Hydrothermal-sintering method was employed to obtain pure and Li,Co,Mn,Cu and Zn doped La_(2)Ti_(2)O_(7) solid solutions.The substitution sites of doping ions are discussed.X-ray diffraction(XRD)results indicate that ...Hydrothermal-sintering method was employed to obtain pure and Li,Co,Mn,Cu and Zn doped La_(2)Ti_(2)O_(7) solid solutions.The substitution sites of doping ions are discussed.X-ray diffraction(XRD)results indicate that the doped ions were incorporated into the lattice of La_(2)Ti_(2)O_(7) successfully.Transmission electron microscopy(TEM)measurements prove that the doped ions with smaller radius induce the contraction of lattice.The re sults of UV and photo luminescence(PL)tests show that the doped ions cause the red-shift of band gap energies and enhance the concentrations of oxygen vacancies and defects.The electrochemical hydrogen storage properties of the samples were measured at 303 and 333 K,respectively.The discharge capacities of the doped samples keep growing by increasing the cycle number at 333 K.Meanwhile,the doped samples possess better kinetic performances than the pure La_(2)Ti_(2)O_(7).Among the samples,the Mn,Co and Li ions doped samples exhibit better electrochemical hydrogen storage properties.The hydrogen storage properties are closely related with the characteristics of doped ions,crystallite sizes,the content of the oxygen vacancies and defects in the lattice of La_(2)Ti_(2)O_(7).展开更多
It is of necessity to investigate the adjustment of flood discharge capacity in the Lower Yellow River(LYR)because of its profound importance in sediment transport and flood control decision-making,and additionally it...It is of necessity to investigate the adjustment of flood discharge capacity in the Lower Yellow River(LYR)because of its profound importance in sediment transport and flood control decision-making,and additionally its magnitude is influenced by the channel and upstream boundary conditions,which have significantly varied with the ongoing implementation of soil and water conservation measures in the Loess Plateau and the operation of the Xiaolangdi Reservoir.The braided reach between two hydrometric stations of Huayuankou and Gaocun in the LYR was selected as the study area.Different parameters in the study reach during the period 1986-2015 were calculated,covering bankfull discharge(the indicator of flood discharge capacity),the pre-flood geomorphic coefficient(the indicator of channel boundary condition),and the previous five-year average fluvial erosion intensity during flood seasons(the indicator of incoming flow and sediment regime).Functional linkages at scales of section and reach were then developed respectively to quantitatively demonstrate the integrated effects of channel and upstream boundary conditions on the flood discharge capacity.Results show that:(1)the reach-scale bankfull discharge in the pre-dam stage(1986-1999)decreased rapidly by 50%,accompanied with severe channel aggradation and main-channel shrinkage.It recovered gradually as the geometry of main channel became narrower and deeper in the post-dam stage,with the geomorphic coefficient continuously reducing to less than 15 m-12.(2)The response of bankfull discharge to the channel and upstream boundary conditions varied at scales of section and reach,and consequently the determination coefficients differed for the comprehensive equations,with a smallest value at the Jiahetan station and a highest value(0.91)at reach scale.Generally,the verified results calculated using the comprehensive equations agreed well with the corresponding measured values in 2014-2015.(3)The effect of channel boundary condition was more prominent than that of upstream boundary condition on the adjustment of bankfull discharge at the Jiahetan station and the braided reach,which was proved by a larger improvement in determination coefficients for the comprehensive equations and a better performance of geomorphic coefficient on the increase of bankfull discharge.展开更多
This paper invesitages the synergetic effect between high-surface-area carbons, such as Ketjan Black(KB) or Super P(SP) carbon materials, and low-surface-area carbon paper(CP) current collectors and it also examines t...This paper invesitages the synergetic effect between high-surface-area carbons, such as Ketjan Black(KB) or Super P(SP) carbon materials, and low-surface-area carbon paper(CP) current collectors and it also examines their influence on the discharge performance of nonaqueous Li–O2cells. Ultra-large specific discharge capacities are found in the KB/CP cathodes, which are much greater than those observed in the individual KB or CP cathodes. Detailed analysis indicates that such unexpectedly large capacities result from the synergetic effect between the two components. During the initial discharges of KB or SP materials, a large number of superoxide radical(O·-2) species in the electrolytes and Li2O2 nuclei at the CP surfaces are formed, which activate the CP current collectors to contribute considerable capacities. These results imply that CP could be a superior material for current collectors in terms of its contribution to the overall discharge capacity.On the other hand, we should be careful to calculate the specific capacities of the oxygen cathodes when using CP as a current collector; i.e., ignoring the contribution from the CP may cause overstated discharge capacities.展开更多
Ni-Fe rechargeable batteries possess the advantages of long cycle life, high theoretical specific energy, abundant raw material, low price and environmental friendship. It has a wide applied perspective. The advantage...Ni-Fe rechargeable batteries possess the advantages of long cycle life, high theoretical specific energy, abundant raw material, low price and environmental friendship. It has a wide applied perspective. The advantages, disadvantages and preparation methods of iron electrodes were summarized. The influence of four factors on discharge capacity and self-discharge rate of iron electrode were discussed by means of orthogonal experiments, galvanostatic charges and discharges. The influences of graphite on the discharge capacity and self-discharge rate of iron electrode were the most remarkable, the most unapparent influences on the discharge capacity and self-discharge rate were HPMC (hydroxy propoxy methoxy cellulose) and sodium sulphide, respectively. The aim of the present research was to study the effects of graphite, HPMC and iron powder added in the electrodes, sodium sulphide added in the electrolytes on the discharge capacity and self-discharge rate of iron electrodes. The largest discharge capacity of the iron electrodes was 488.5 mAh/g-Fe at 66.4 mA/g-Fe in the first ten cycles, and the average self-discharge rate was 0.367% per hour.展开更多
A series of manganese spinels LiMn2-yMeyO4 （Me = Li, A1, Mg） were prepared and examined by XRD and electrochemical methods. The spinels doped with Li or high content of A1 can exhibit discharge capacity in the 5 V r...A series of manganese spinels LiMn2-yMeyO4 （Me = Li, A1, Mg） were prepared and examined by XRD and electrochemical methods. The spinels doped with Li or high content of A1 can exhibit discharge capacity in the 5 V region, but spinels doped with Mg do not exhibit any 5 V discharge capacity. It is also observed that the 5 V discharge capacity of Li/A1 doped spinels will be greatly suppressed once calcinated at temperatures above 900 ℃ in preparation. It is suggested that the 5 V discharge capacity of Li/A1 doped spinels may be originated from the special chemical/structural characteristics of spinel phases containing Li or high content of A1 prepared at temperatures below 900 ℃.展开更多
A modified piano key weir with a rounded nose and a parapet wall (MPKW) can improve the discharge capacity significantly compared to a standard piano key weir. However, the optimum of the inlet/outlet width ratio (Wi/...A modified piano key weir with a rounded nose and a parapet wall (MPKW) can improve the discharge capacity significantly compared to a standard piano key weir. However, the optimum of the inlet/outlet width ratio (Wi/Wo) on the discharge efficiency of MPKW is still not investigated numerically. The present work utilized the numerical modeling to investigate and analyze the effects of the inlet/outlet key width ratios on the hydraulic characteristics and discharge capacity of the MPKW. To validate the numerical model with the experimental data, the results indicate that the average relative error is 2.96%, which confirms that the numerical model is fairly well to predictthe specifications of flow over on the MPKW. Numerical simulation results indicated that the discharge capacity of the MPKW can be improved up to 8.5% by optimizing the Wi/Wo ratio ranging from 1.53 to 1.67 even if the other parameters of the MPKW keep unchanged. A big Wi/Wo ratio generally leads to an increase in discharge capacity at low heads and a little effect on the discharge efficiency at high heads. The discharge efficiency of the inlet and outlet crests increases up to 9.6% for high heads, while discharge efficiency of the lateral crest decreases up to 23.5% compared with the reference model. The findings of the study revealed that the intrinsic influencing mechanism of the Wi/Wo ratio on the discharge performance of MPKWs.展开更多
Electrochemical energy storage is a promising technology for the integration of renewable energy.Lead-acid battery is perhaps among the most successful commercialized systems ever since thanks to its excellent cost-ef...Electrochemical energy storage is a promising technology for the integration of renewable energy.Lead-acid battery is perhaps among the most successful commercialized systems ever since thanks to its excellent cost-effectiveness and safety records.Despite of 165 years of development,the low energy density as well as the coupled power and energy density scaling restrain its wider application in real life.To address this challenge,we optimized the configuration of conventional Pb-acid battery to integrate two gas diffusion electrodes.The novel device can work as a Pb-air battery using ambient air,showing a peak power density of 183 mW cm^(−2),which was comparable with other state-of-the-art metal-O_(2)batteries.It can also behave as a fuel cell,simultaneously converting H_(2)and air into electricity with a peak power density of 75 mW cm^(−2).Importantly,this device showed little performance degradation after 35 h of the longevity test.Our work shows the exciting potential of lead battery technology and demonstrates the importance of battery architecture optimization toward improved energy storage capacity.展开更多
Li/Ni mixing negatively influences the discharge capacity of lithium nickel oxide and high-nickel ternary cathode materials.However,accurately measuring the Li/Ni mixing degree is difficult due to the preferred orient...Li/Ni mixing negatively influences the discharge capacity of lithium nickel oxide and high-nickel ternary cathode materials.However,accurately measuring the Li/Ni mixing degree is difficult due to the preferred orientation of labbased XRD measurements using Bragg–Brentano geometry.Here,we find that employing spherical harmonics in Rietveld refinement to eliminate the preferred orientation can significantly decrease the measurement error of the Li/Ni mixing ratio.The Li/Ni mixing ratio obtained from Rietveld refinement with spherical harmonics shows a strong correlation with discharge capacity,which means the electrochemical capacity of lithium nickel oxide and high-nickel ternary cathode can be estimated by the Li/Ni mixing degree.Our findings provide a simple and accurate method to estimate the Li/Ni mixing degree,which is valuable to the structural analysis and screening of the synthesis conditions of lithium nickel oxide and high-nickel ternary cathode materials.展开更多
The structures and electrochemical properties of the Ti1.4V0.6Ni ribbon before and after heat treatment are investigated systematically. The structure of the sample is characterized by X-ray powder diffraction analysi...The structures and electrochemical properties of the Ti1.4V0.6Ni ribbon before and after heat treatment are investigated systematically. The structure of the sample is characterized by X-ray powder diffraction analysis. Electrochemical properties including the discharge capacity, the cyclic stability and the high-rate discharge ability are tested. X-ray powder diffraction analysis shows that after heat treatment at 590 °C for 30 min, all samples mainly consist of the icosahedral quasicrystal phase (I-phase), Ti2Ni phase (FCC), V-based solid solution phase (BCC) and C14 Laves phase (hexagonal). Electrochemical measurements show that the maximum discharge capacity of the alloy electrode after heat treatment is 330.9 mA?h/g under the conditions that the discharge current density is 30 mA/g and the temperature is 30 °C. The result indicates that the cyclic stability and the high-rate discharge ability are all improved. In addition, the electrochemical kinetics of the alloy electrode is also studied by electrochemical impedance spectroscopy (EIS) and hydrogen diffusion coefficient (D).展开更多
High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were stu...High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were studied. The re-suits reveal that all the synthesized Ni（OH）2 particles were in sub-micron sizes and greatly agglomerated. Co-, Mg-,Fe- or Mn-doped Ni （OH） 2 was of β-phase with 0.400-0.500 nm crystal interlayer distance, while A1- and Zn-doped products displayed a-phase with larger crystal interlayer spaces. The electrochemical mechanisms of synthe-sized Ni（OH）2 electrodes were discussed by EIS spectra. The specific capacity of Co-doped Ni （OH）2 is 245 mA·h · g^-1, i. e. , 60 mA· h · g^-1 higher than that of Al-doped electrode, which has the highest discharging plat-form of a mid-voltage of 1.30 V.展开更多
3D urchin-like Co3O4 have been successfully prepared by calcination of the urchin-like precursors, which were synthesized through a facile hydrothermal route. The morphology and structure of the 3D urchin-like Co3O4 h...3D urchin-like Co3O4 have been successfully prepared by calcination of the urchin-like precursors, which were synthesized through a facile hydrothermal route. The morphology and structure of the 3D urchin-like Co3O4 have been characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, and X-ray powder diffraction. The as-synthesized Co3O4 products are of urchin-like structures with approximated 5-7 μm in diameter, and are composed of numerous nanoparticles chains with the particles diameter of about 15 nm. This kind of urchin-like Co3O4 exhibits superior energy storage properties with the high capacity of 1.369 Ah/g and its good cyclic stability shows great potential in the rechargeable Li-ion battery.展开更多
Modification of LiFePO4, LiMn2O4 and Li1＋xV3O8 by doping yttrium was investigated. The influences of doping Y on structure, morphology and electrochemical performance of cathode materials were investigated systematic...Modification of LiFePO4, LiMn2O4 and Li1＋xV3O8 by doping yttrium was investigated. The influences of doping Y on structure, morphology and electrochemical performance of cathode materials were investigated systematically. The results indicated that the mechanisms of Y doping in three cathode materials were different, so the influences on the material performance were different. The crystal structure of the three materials was not changed by Y doping. However, the crystal parameters were influenced. The crystal parameters of LiMn2O4 became smaller, and the interlayer distance of （100） crystal plane of Li1-xV3O8 was lengthened after Y doping. The grain size of Y-doped LiFePO4 became smaller and grain morphology became more regular than that of undoped LiFePO4. It indicated that Y doping had no influence on crystal particle and morphology of LiMn2O4. The morphology of Li1＋xV3O8 became irregular and its size became larger with the increase of Y. For LiFePOaand Li1＋xV3O8, both the initial discharge capacities and the cyclic performance were improved by Y doping. For LiMn2O4, the cyclic performance became better and the initial discharge capacities declined with increasing Y doping.展开更多
Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galv...Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system.The gaseous hydrogen absorption and desorption properties were investigated by Sievert’s apparatus and differential scanningcalorimeter(DSC)connected with a H2detector.The results indicated that increasing Ni content significantly improves the gaseousand electrochemical hydrogen storage performances of the as-milled alloys.The gaseous hydrogen absorption capacities andabsorption rates of the as-milled alloys have the maximum values with the variation of the milling time.But the hydrogen desorptionkinetics of the alloys always increases with the extending of milling time.In addition,the electrochemical discharge capacity andhigh rate discharge(HRD)ability of the as-milled alloys both increase first and then decrease with milling time prolonging.展开更多
The effects of surface treatment, particle size distribution,rare earth composition and B additive on the high rate discharge performance of hydrogen storage alloys were investigated. It is found that the activity, di...The effects of surface treatment, particle size distribution,rare earth composition and B additive on the high rate discharge performance of hydrogen storage alloys were investigated. It is found that the activity, discharge capacity and high rate dischargeability of the alloys are improved after physical and chemical modification as a result of the increase of the surface area and formation of the electrocatalysis layers, which increase both the electrochemical reaction rate on the alloy surface and H diffusion rate in the alloy bulk. It is also found that both the over-coarse and over-fine particle size increase the contact resistance of the electrode, resulting in a decrease of discharge capacity, deterioration of high rate dischargeability and lower discharge plateau. In another word, a suitable particle size distribution can enhance the alloy activity, discharge capacity and high rate dischargeability. In addition, the high rate dischargeability is enhanced by increasing La content and decreasing Ce content of the alloy composition because of enlargement of the unit cell volume and the improvement of the surface activity. Moreover, B additive resultes in the formation of the second phase, and makes the alloys easier pulverization, which greatly improves the activity, discharge capacity and high rate dischargeability.展开更多
La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabr...La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabricate the alloys. Theidentification of XRD and SEM reveals that the experimental alloys consist of a major phase LaMgNi4 and a secondary phase LaNi5.The growth of spinning rate results in that the lattice constants and cell volume increase and the grains are markedly refined. Theelectrochemical measurement shows that the as-cast and spun alloys can obtain the maximum discharge capacities just at the firstcycle without any activation needed. With the increase of spinning rate, the discharge capacities of the alloys first increase and thendecline, whereas their cycle stabilities always grow. Moreover, the electrochemical kinetic performances of the alloys first increaseand then decrease with spinning rate growing.展开更多
The La-Mg-Ni-Co-Al-based AB2-type La0.8-xCe0.2YxMgNi3.4Co0.4Al0.1(x=0,0.05,0.1,0.15,0.2)alloys were prepared via melt spinning.The analyses of the X-ray diffraction(XRD)and scanning electron microscopy(SEM)proved that...The La-Mg-Ni-Co-Al-based AB2-type La0.8-xCe0.2YxMgNi3.4Co0.4Al0.1(x=0,0.05,0.1,0.15,0.2)alloys were prepared via melt spinning.The analyses of the X-ray diffraction(XRD)and scanning electron microscopy(SEM)proved that the experimental alloys contain the main phase LaMgNi4 and the second phase LaNi5.Increasing Y content and spinning rate lead to grain refinement and obvious change of the phase abundance without changing phase composition.Y substitution for La and melt spinning make the life-span of the alloys improved remarkably,which is attributed to the improvement of anti-oxidation,anti-pulverization and anti-corrosion abilities.In addition,the discharge capacity visibly decreases with increasing the Y content,while it firstly increases and then decreases with increasing spinning rate.The electrochemical kinetics increases to the optimum performance and then reduces with increasing spinning rate.Moreover,all the alloys achieve to the highest discharge capacities just at the initial cycle without activation.展开更多
In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying....In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying. The discharge capacity of the fast cooled was 83 mAh·g-1 and the slow cooled 121 mAh·g-1. The particle size of the synthesized powder was examined by transmission electron microscopy and distribution of Fe2P was characterized using scanning electron microscopy (SEM). In addition, two-step heat treatment was carried out for better distribution of Fe2P. X-ray diffraction (XRD) and Rietveld refinement reveal that LiFePO4/Fe2P composite consists of 95.77% LiFePO4 and 4.33% of Fe2P.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51906230)the Key scientific and technological projects in Henan Province(Grant No.212102210007)the Project of Zhongyuan Science and Technology Innovation Talents(Grant No.234200510011).
文摘The biggest challenge for organic phase change materials(PCMs)used in cold energy storage is to maintain high heat storage capacity while reducing the leakage risk of PCMs during the phase transition process.This is crucial for expanding their applications in the more demanding cold storage field.In this study,novel formstable low-temperature composite PCMs are prepared with mesoporous materials,namely SBA-15 and CMK-3(which are prepared using the template method),as supporting matrices and dodecane as the PCM.Owing to the combined effects of capillary forces within mesoporous materials and interactions among dodecane molecules,both dodecane/SBA-15 and dodecane/CMK-3 exhibit outstanding shape stability and thermal cycling stability even after 200 heating/cooling cycles.In comparison to those of dodecane/SBA-15,dodecane/CMK-3 exhibits superior cold storage performance and higher thermal conductivity.Specifically,the phase transition temperature of dodecane/CMK-3 is-8.81℃ with a latent heat of 122.4 J·g^(-1).Additionally,it has a thermal conductivity of 1.21 W·m^(-1)·K^(-1),which is 9.45 times that of dodecane alone.All these highlight its significant potential for applications in the area of cold energy storage.
基金supported by the National Natural Science Foundation of China(Nos.52122408,52071023)the Program for Science&Technology Innovation Talents in the University of Henan Province(No.22HASTIT1006)+2 种基金the Program for Central Plains Talents(No.ZYYCYU202012172)the Ministry of Education,Singapore(No.RG70/20)the Opening Project of National Joint Engineering Research Center for Abrasion Control and Molding of Metal Materials,Henan University of Science and Technology(No.HKDNM201906).
文摘Although lithium-ion batteries(LIBs)currently dominate a wide spectrum of energy storage applications,they face challenges such as fast cycle life decay and poor stability that hinder their further application.To address these limitations,element doping has emerged as a prevalent strategy to enhance the discharge capacity and extend the durability of Li-Ni-Co-Mn(LNCM)ternary compounds.This study utilized a machine learning-driven feature screening method to effectively pinpoint four key features crucially impacting the initial discharge capacity(IC)of Li-Ni-Co-Mn(LNCM)ternary cathode materials.These features were also proved highly predictive for the 50^(th)cycle discharge capacity(EC).Additionally,the application of SHAP value analysis yielded an in-depth understanding of the interplay between these features and discharge performance.This insight offers valuable direction for future advancements in the development of LNCM cathode materials,effectively promoting this field toward greater efficiency and sustainability.
基金supported by the National Natural Science Foundation of China(Nos.52125405 and U22A20108)Thailand Science Research and Innovation Fund Chulalongkorn University,National Research Council of Thailand(NRCT)+1 种基金Chulalongkorn University(No.42A660383)the Hub of Talents:Sustainable Materials for Circular Economy,National Research Council of Thailand(NRCT).
文摘LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity decay,and poor cycling performance in conventional lithium-ion battery cathode materials.The charge-discharge processes of LVO span multiple platforms,delivering an impressive specific discharge capacity of 219.4 mAh.g^(-1) at 1C.Remarkably,LVO exhibits a high-capacity retention rate of 81.3%after 800 cycles within the typical operating voltage range of lithium-ion batteries(2.8-4.3V).Rate capability tests and electrochemical impedance spectroscopy(EIS)reveal that,compared to traditional cathode materials,LVO significantly enhances Li*diffusion rates(D_(Li*))and reduces charge transfer resistance(Ret).
基金Project supported by the National Natural Science Foundation of China(51962028,51961032,52061036)Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT23007,NJYT23005,NJYT22064)+1 种基金Natural Science Foundation of Inner Mongolia(2022LHMS05021,2022MS05018)Basic Research Funds for Universities Directly Under the Inner Mongolia Autonomous Region(2023QNJS033)。
文摘Hydrothermal-sintering method was employed to obtain pure and Li,Co,Mn,Cu and Zn doped La_(2)Ti_(2)O_(7) solid solutions.The substitution sites of doping ions are discussed.X-ray diffraction(XRD)results indicate that the doped ions were incorporated into the lattice of La_(2)Ti_(2)O_(7) successfully.Transmission electron microscopy(TEM)measurements prove that the doped ions with smaller radius induce the contraction of lattice.The re sults of UV and photo luminescence(PL)tests show that the doped ions cause the red-shift of band gap energies and enhance the concentrations of oxygen vacancies and defects.The electrochemical hydrogen storage properties of the samples were measured at 303 and 333 K,respectively.The discharge capacities of the doped samples keep growing by increasing the cycle number at 333 K.Meanwhile,the doped samples possess better kinetic performances than the pure La_(2)Ti_(2)O_(7).Among the samples,the Mn,Co and Li ions doped samples exhibit better electrochemical hydrogen storage properties.The hydrogen storage properties are closely related with the characteristics of doped ions,crystallite sizes,the content of the oxygen vacancies and defects in the lattice of La_(2)Ti_(2)O_(7).
基金National Natural Science Foundation of China,No.51725902,No.51579186。
文摘It is of necessity to investigate the adjustment of flood discharge capacity in the Lower Yellow River(LYR)because of its profound importance in sediment transport and flood control decision-making,and additionally its magnitude is influenced by the channel and upstream boundary conditions,which have significantly varied with the ongoing implementation of soil and water conservation measures in the Loess Plateau and the operation of the Xiaolangdi Reservoir.The braided reach between two hydrometric stations of Huayuankou and Gaocun in the LYR was selected as the study area.Different parameters in the study reach during the period 1986-2015 were calculated,covering bankfull discharge(the indicator of flood discharge capacity),the pre-flood geomorphic coefficient(the indicator of channel boundary condition),and the previous five-year average fluvial erosion intensity during flood seasons(the indicator of incoming flow and sediment regime).Functional linkages at scales of section and reach were then developed respectively to quantitatively demonstrate the integrated effects of channel and upstream boundary conditions on the flood discharge capacity.Results show that:(1)the reach-scale bankfull discharge in the pre-dam stage(1986-1999)decreased rapidly by 50%,accompanied with severe channel aggradation and main-channel shrinkage.It recovered gradually as the geometry of main channel became narrower and deeper in the post-dam stage,with the geomorphic coefficient continuously reducing to less than 15 m-12.(2)The response of bankfull discharge to the channel and upstream boundary conditions varied at scales of section and reach,and consequently the determination coefficients differed for the comprehensive equations,with a smallest value at the Jiahetan station and a highest value(0.91)at reach scale.Generally,the verified results calculated using the comprehensive equations agreed well with the corresponding measured values in 2014-2015.(3)The effect of channel boundary condition was more prominent than that of upstream boundary condition on the adjustment of bankfull discharge at the Jiahetan station and the braided reach,which was proved by a larger improvement in determination coefficients for the comprehensive equations and a better performance of geomorphic coefficient on the increase of bankfull discharge.
基金supported by the Natural Science Foundation of the Chinese Academy of Sciences(Grant No.KGZD-EW-202-2)the National Key Basic Research Program of China(Grant No.2014CB921004)the National Natural Science Foundation of China(Grant No.U1232111)
文摘This paper invesitages the synergetic effect between high-surface-area carbons, such as Ketjan Black(KB) or Super P(SP) carbon materials, and low-surface-area carbon paper(CP) current collectors and it also examines their influence on the discharge performance of nonaqueous Li–O2cells. Ultra-large specific discharge capacities are found in the KB/CP cathodes, which are much greater than those observed in the individual KB or CP cathodes. Detailed analysis indicates that such unexpectedly large capacities result from the synergetic effect between the two components. During the initial discharges of KB or SP materials, a large number of superoxide radical(O·-2) species in the electrolytes and Li2O2 nuclei at the CP surfaces are formed, which activate the CP current collectors to contribute considerable capacities. These results imply that CP could be a superior material for current collectors in terms of its contribution to the overall discharge capacity.On the other hand, we should be careful to calculate the specific capacities of the oxygen cathodes when using CP as a current collector; i.e., ignoring the contribution from the CP may cause overstated discharge capacities.
基金This work was supported by the National Natural Science Foundation of China under grant No.50002005Natural Sci ence Foundation of Tianjin under grant No.013606811,which were presided by Shihai YE.
文摘Ni-Fe rechargeable batteries possess the advantages of long cycle life, high theoretical specific energy, abundant raw material, low price and environmental friendship. It has a wide applied perspective. The advantages, disadvantages and preparation methods of iron electrodes were summarized. The influence of four factors on discharge capacity and self-discharge rate of iron electrode were discussed by means of orthogonal experiments, galvanostatic charges and discharges. The influences of graphite on the discharge capacity and self-discharge rate of iron electrode were the most remarkable, the most unapparent influences on the discharge capacity and self-discharge rate were HPMC (hydroxy propoxy methoxy cellulose) and sodium sulphide, respectively. The aim of the present research was to study the effects of graphite, HPMC and iron powder added in the electrodes, sodium sulphide added in the electrolytes on the discharge capacity and self-discharge rate of iron electrodes. The largest discharge capacity of the iron electrodes was 488.5 mAh/g-Fe at 66.4 mA/g-Fe in the first ten cycles, and the average self-discharge rate was 0.367% per hour.
基金Funded partly by the Fundamental Research Funds for the Central Universities (No.WHUT-2012-Ia-029)the Foundation of the Ministry of Education of China for Returned Scholars (No.2007-24)
文摘A series of manganese spinels LiMn2-yMeyO4 （Me = Li, A1, Mg） were prepared and examined by XRD and electrochemical methods. The spinels doped with Li or high content of A1 can exhibit discharge capacity in the 5 V region, but spinels doped with Mg do not exhibit any 5 V discharge capacity. It is also observed that the 5 V discharge capacity of Li/A1 doped spinels will be greatly suppressed once calcinated at temperatures above 900 ℃ in preparation. It is suggested that the 5 V discharge capacity of Li/A1 doped spinels may be originated from the special chemical/structural characteristics of spinel phases containing Li or high content of A1 prepared at temperatures below 900 ℃.
文摘A modified piano key weir with a rounded nose and a parapet wall (MPKW) can improve the discharge capacity significantly compared to a standard piano key weir. However, the optimum of the inlet/outlet width ratio (Wi/Wo) on the discharge efficiency of MPKW is still not investigated numerically. The present work utilized the numerical modeling to investigate and analyze the effects of the inlet/outlet key width ratios on the hydraulic characteristics and discharge capacity of the MPKW. To validate the numerical model with the experimental data, the results indicate that the average relative error is 2.96%, which confirms that the numerical model is fairly well to predictthe specifications of flow over on the MPKW. Numerical simulation results indicated that the discharge capacity of the MPKW can be improved up to 8.5% by optimizing the Wi/Wo ratio ranging from 1.53 to 1.67 even if the other parameters of the MPKW keep unchanged. A big Wi/Wo ratio generally leads to an increase in discharge capacity at low heads and a little effect on the discharge efficiency at high heads. The discharge efficiency of the inlet and outlet crests increases up to 9.6% for high heads, while discharge efficiency of the lateral crest decreases up to 23.5% compared with the reference model. The findings of the study revealed that the intrinsic influencing mechanism of the Wi/Wo ratio on the discharge performance of MPKWs.
基金the funding through the National Natural Science Foundation of China (52272233)Guangdong Basic and Applied Basic Research Foundation (2023A1515011161)
文摘Electrochemical energy storage is a promising technology for the integration of renewable energy.Lead-acid battery is perhaps among the most successful commercialized systems ever since thanks to its excellent cost-effectiveness and safety records.Despite of 165 years of development,the low energy density as well as the coupled power and energy density scaling restrain its wider application in real life.To address this challenge,we optimized the configuration of conventional Pb-acid battery to integrate two gas diffusion electrodes.The novel device can work as a Pb-air battery using ambient air,showing a peak power density of 183 mW cm^(−2),which was comparable with other state-of-the-art metal-O_(2)batteries.It can also behave as a fuel cell,simultaneously converting H_(2)and air into electricity with a peak power density of 75 mW cm^(−2).Importantly,this device showed little performance degradation after 35 h of the longevity test.Our work shows the exciting potential of lead battery technology and demonstrates the importance of battery architecture optimization toward improved energy storage capacity.
基金Project supported by the Natural Science Foundation of Beijing(Grant No.Z200013)the Beijing Municipal Science&Technology(Grant No.Z191100004719001)the National Natural Science Foundation of China(Grant Nos.52325207 and 22005333)。
文摘Li/Ni mixing negatively influences the discharge capacity of lithium nickel oxide and high-nickel ternary cathode materials.However,accurately measuring the Li/Ni mixing degree is difficult due to the preferred orientation of labbased XRD measurements using Bragg–Brentano geometry.Here,we find that employing spherical harmonics in Rietveld refinement to eliminate the preferred orientation can significantly decrease the measurement error of the Li/Ni mixing ratio.The Li/Ni mixing ratio obtained from Rietveld refinement with spherical harmonics shows a strong correlation with discharge capacity,which means the electrochemical capacity of lithium nickel oxide and high-nickel ternary cathode can be estimated by the Li/Ni mixing degree.Our findings provide a simple and accurate method to estimate the Li/Ni mixing degree,which is valuable to the structural analysis and screening of the synthesis conditions of lithium nickel oxide and high-nickel ternary cathode materials.
基金Project (20112216120001) supported by the Doctoral Program of Tertiary Education of the Ministry of Education of ChinaProject(21215141) supported by the Natural Science Foundation of Jilin Province, China+3 种基金Project (20921002) supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of ChinaProjects (21073179, 61106050) supported by the National Natural Science Foundation of ChinaProject (BE2012047) supported by Scientific and Technological Supporting Program of Jiangsu Province of China and GS Yuasa Corporation of JapanProject (11KZ38) supported by and Scientific and Technological Pillar Project of Changchun, China
文摘The structures and electrochemical properties of the Ti1.4V0.6Ni ribbon before and after heat treatment are investigated systematically. The structure of the sample is characterized by X-ray powder diffraction analysis. Electrochemical properties including the discharge capacity, the cyclic stability and the high-rate discharge ability are tested. X-ray powder diffraction analysis shows that after heat treatment at 590 °C for 30 min, all samples mainly consist of the icosahedral quasicrystal phase (I-phase), Ti2Ni phase (FCC), V-based solid solution phase (BCC) and C14 Laves phase (hexagonal). Electrochemical measurements show that the maximum discharge capacity of the alloy electrode after heat treatment is 330.9 mA?h/g under the conditions that the discharge current density is 30 mA/g and the temperature is 30 °C. The result indicates that the cyclic stability and the high-rate discharge ability are all improved. In addition, the electrochemical kinetics of the alloy electrode is also studied by electrochemical impedance spectroscopy (EIS) and hydrogen diffusion coefficient (D).
基金Supported by the National Natural Science Foundation of China(No.20273047).
文摘High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were studied. The re-suits reveal that all the synthesized Ni（OH）2 particles were in sub-micron sizes and greatly agglomerated. Co-, Mg-,Fe- or Mn-doped Ni （OH） 2 was of β-phase with 0.400-0.500 nm crystal interlayer distance, while A1- and Zn-doped products displayed a-phase with larger crystal interlayer spaces. The electrochemical mechanisms of synthe-sized Ni（OH）2 electrodes were discussed by EIS spectra. The specific capacity of Co-doped Ni （OH）2 is 245 mA·h · g^-1, i. e. , 60 mA· h · g^-1 higher than that of Al-doped electrode, which has the highest discharging plat-form of a mid-voltage of 1.30 V.
基金This work was supported by the National Natural Science Foundation of China （No.11074254）, the Ministry of Science and Technology of China （No.2005CB623603）, the Hundred Talent Program of Chinese Academy of Sciences, and the President Foundation of Hefei Institute of Physical Sciences.
文摘3D urchin-like Co3O4 have been successfully prepared by calcination of the urchin-like precursors, which were synthesized through a facile hydrothermal route. The morphology and structure of the 3D urchin-like Co3O4 have been characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, and X-ray powder diffraction. The as-synthesized Co3O4 products are of urchin-like structures with approximated 5-7 μm in diameter, and are composed of numerous nanoparticles chains with the particles diameter of about 15 nm. This kind of urchin-like Co3O4 exhibits superior energy storage properties with the high capacity of 1.369 Ah/g and its good cyclic stability shows great potential in the rechargeable Li-ion battery.
文摘Modification of LiFePO4, LiMn2O4 and Li1＋xV3O8 by doping yttrium was investigated. The influences of doping Y on structure, morphology and electrochemical performance of cathode materials were investigated systematically. The results indicated that the mechanisms of Y doping in three cathode materials were different, so the influences on the material performance were different. The crystal structure of the three materials was not changed by Y doping. However, the crystal parameters were influenced. The crystal parameters of LiMn2O4 became smaller, and the interlayer distance of （100） crystal plane of Li1-xV3O8 was lengthened after Y doping. The grain size of Y-doped LiFePO4 became smaller and grain morphology became more regular than that of undoped LiFePO4. It indicated that Y doping had no influence on crystal particle and morphology of LiMn2O4. The morphology of Li1＋xV3O8 became irregular and its size became larger with the increase of Y. For LiFePOaand Li1＋xV3O8, both the initial discharge capacities and the cyclic performance were improved by Y doping. For LiMn2O4, the cyclic performance became better and the initial discharge capacities declined with increasing Y doping.
基金Projects(51161015,51371094,51471054) supported by the National Natural Science Foundation of China
文摘Nanocrystalline and amorphous LaMg11Ni+x%Ni(x=100,200,mass fraction)alloys were synthesized by mechanicalmilling.The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system.The gaseous hydrogen absorption and desorption properties were investigated by Sievert’s apparatus and differential scanningcalorimeter(DSC)connected with a H2detector.The results indicated that increasing Ni content significantly improves the gaseousand electrochemical hydrogen storage performances of the as-milled alloys.The gaseous hydrogen absorption capacities andabsorption rates of the as-milled alloys have the maximum values with the variation of the milling time.But the hydrogen desorptionkinetics of the alloys always increases with the extending of milling time.In addition,the electrochemical discharge capacity andhigh rate discharge(HRD)ability of the as-milled alloys both increase first and then decrease with milling time prolonging.
文摘The effects of surface treatment, particle size distribution,rare earth composition and B additive on the high rate discharge performance of hydrogen storage alloys were investigated. It is found that the activity, discharge capacity and high rate dischargeability of the alloys are improved after physical and chemical modification as a result of the increase of the surface area and formation of the electrocatalysis layers, which increase both the electrochemical reaction rate on the alloy surface and H diffusion rate in the alloy bulk. It is also found that both the over-coarse and over-fine particle size increase the contact resistance of the electrode, resulting in a decrease of discharge capacity, deterioration of high rate dischargeability and lower discharge plateau. In another word, a suitable particle size distribution can enhance the alloy activity, discharge capacity and high rate dischargeability. In addition, the high rate dischargeability is enhanced by increasing La content and decreasing Ce content of the alloy composition because of enlargement of the unit cell volume and the improvement of the surface activity. Moreover, B additive resultes in the formation of the second phase, and makes the alloys easier pulverization, which greatly improves the activity, discharge capacity and high rate dischargeability.
基金Projects(51371094,51471054)supported by the National Natural Science Foundation of China
文摘La was partially substituted by Ce with the aim of improving the electrochemical hydrogen storage performances ofLa1–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabricate the alloys. Theidentification of XRD and SEM reveals that the experimental alloys consist of a major phase LaMgNi4 and a secondary phase LaNi5.The growth of spinning rate results in that the lattice constants and cell volume increase and the grains are markedly refined. Theelectrochemical measurement shows that the as-cast and spun alloys can obtain the maximum discharge capacities just at the firstcycle without any activation needed. With the increase of spinning rate, the discharge capacities of the alloys first increase and thendecline, whereas their cycle stabilities always grow. Moreover, the electrochemical kinetic performances of the alloys first increaseand then decrease with spinning rate growing.
基金Projects(51761032,51471054)supported by the National Natural Science Foundation of ChinaProject(2015MS0558)supported by the Natural Science Foundation of Inner Mongolia,China
文摘The La-Mg-Ni-Co-Al-based AB2-type La0.8-xCe0.2YxMgNi3.4Co0.4Al0.1(x=0,0.05,0.1,0.15,0.2)alloys were prepared via melt spinning.The analyses of the X-ray diffraction(XRD)and scanning electron microscopy(SEM)proved that the experimental alloys contain the main phase LaMgNi4 and the second phase LaNi5.Increasing Y content and spinning rate lead to grain refinement and obvious change of the phase abundance without changing phase composition.Y substitution for La and melt spinning make the life-span of the alloys improved remarkably,which is attributed to the improvement of anti-oxidation,anti-pulverization and anti-corrosion abilities.In addition,the discharge capacity visibly decreases with increasing the Y content,while it firstly increases and then decreases with increasing spinning rate.The electrochemical kinetics increases to the optimum performance and then reduces with increasing spinning rate.Moreover,all the alloys achieve to the highest discharge capacities just at the initial cycle without activation.
文摘In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying. The discharge capacity of the fast cooled was 83 mAh·g-1 and the slow cooled 121 mAh·g-1. The particle size of the synthesized powder was examined by transmission electron microscopy and distribution of Fe2P was characterized using scanning electron microscopy (SEM). In addition, two-step heat treatment was carried out for better distribution of Fe2P. X-ray diffraction (XRD) and Rietveld refinement reveal that LiFePO4/Fe2P composite consists of 95.77% LiFePO4 and 4.33% of Fe2P.
