The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density ...The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.展开更多
In order to evaluate the electrochemical properties of aluminum alloy anode under high current densities in alkaline electrolyte, the galvanostatic discharge, potentiodynamic polarization and hydrogen evolution tests ...In order to evaluate the electrochemical properties of aluminum alloy anode under high current densities in alkaline electrolyte, the galvanostatic discharge, potentiodynamic polarization and hydrogen evolution tests of three experimental Al?Mg?Sn?In?(Ga) alloys were performed. The results show that the alloying element gallium improves the working potentials of experimental Al?Mg?Sn?In alloys under different discharge current densities. The average working potentials of the alloys containing gallium can reach?1.3 V under current density ranging from 650 to 900 mA/cm2, while those of alloy without Ga are only?1.0 V. Such phenomenon is attributed to the solid solution which can form amalgam with aluminum matrix. Such an amalgam can form the hydrolyzed species during the discharge process and lead to the corrosion infiltrating into aluminum matrix.展开更多
The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemic...The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemical and discharge tests. Results show that the synergetic effects of the dissolved Mn and Mn-modifying Al_(3)Fe intermetallic decrease the weight loss and inhibit the hydrogen evolution of commercial purity Al in Na OH solution when minor Mn is introduced. However, more Mn addition leads to the formation of Al_6Mn intermetallic,which has little effect on the weight loss, but accelerates the hydrogen evolution. Mn introduction plays a positive role in activating Al anodes, resulting in a decrease in the anodic polarization and an increase in the discharge voltage. Among all the commercial purity Al-x Mn anodes, 0.1 wt% Mn addition exhibits the best discharge efficiency for Al-air battery.展开更多
We studied cycle time （0.01-10 s with triangular input waves） and poling history （continuous versus fresh poling） dependent electric energy storage and discharge behaviors in poly（vinylidene fluoride-co-hexafluor...We studied cycle time （0.01-10 s with triangular input waves） and poling history （continuous versus fresh poling） dependent electric energy storage and discharge behaviors in poly（vinylidene fluoride-co-hexafluoropropylene） [P（VDF- HFP）] films using the electric displacement -- the electric field （D-E） hysteresis loop measurements. Since the permanent dipoles in PVDF are orientational in nature, it is generally considered that both charging and discharging processes should be time and poling history dependent. Intriguingly, our experimental results showed that the charging process depended heavily on the cycle time and the prior poling history, and thus the D-E hysteresis loops had different shapes accordingly. However, the discharged energy density did not change no matter how the D-E loop shape varied due to different measurements. This experimental result could be explained in terms of reversible and irreversible polarizations. The reversible polarization could be charged and discharged fairly quickly （〈 5 ms for each process）, while the irreversible polarization depended heavily on the poling time and the prior poling history. This study suggests that it is only meaningful to compare the discharged energy density for PVDF and its copolymer films when different cycle times and poling histories are used.展开更多
A novel type of porous magnesium electrode with a stable 3D copper foam as current collectors for the organic magnesium-air battery was prepared by both amperostatic and pulsed electrodeposition of magnesium on copper...A novel type of porous magnesium electrode with a stable 3D copper foam as current collectors for the organic magnesium-air battery was prepared by both amperostatic and pulsed electrodeposition of magnesium on copper foam substrates in an electrolyte of 1 mol/L EtMgBr/THF solution, respectively. Optimal parameters of the pulsed electrodeposition were obtained using a bending cathode at the right angle. The surface morphology of the porous electrode was investigated by SEM, and the discharging performance of the porous magnesium electrode was detected by the chronoamperometric measurement. The electrochemical stability of 3D copper foam current collectors was examined by cyclic voltammetry, SEM and ICP-OES analyses. The results show that the rate capability of the porous magnesium electrode with a stable 3D copper foam as a current collector is better than that of the planar magnesium electrode, and the rate capability of the porous magnesium electrode prepared by the pulsed electrodeposition is superior to that of the porous magnesium electrode prepared by the amperostatic electrodeposition. The 3D structure of copper foam current collectors of the porous magnesium electrode could keep stable during the discharging process.展开更多
A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effec...A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effect of metal as a liquid fuel, we report here the impact of the thermal and electrochemical oxidation behavior of nano Sn （-100 nm）, comparing with micro-sized （-5 μm） and macro-sized （4350 μm） Sn. The thermogravimetric analysis and the monitoring OCV test indicate that the distinct property of nano-sized Sn results in a favorable thermal oxidation behavior near the melting point and a promising power performance due to enhanced fuel transport to the anode. However, the accumulated Sn oxide at the reaction interface during a discharge test towards the limitation of further electrochemical oxidation.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51077032).
文摘The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.
基金Project supported by the Open Fund of the State Key Laboratory of Powder Metallurgy,China
文摘In order to evaluate the electrochemical properties of aluminum alloy anode under high current densities in alkaline electrolyte, the galvanostatic discharge, potentiodynamic polarization and hydrogen evolution tests of three experimental Al?Mg?Sn?In?(Ga) alloys were performed. The results show that the alloying element gallium improves the working potentials of experimental Al?Mg?Sn?In alloys under different discharge current densities. The average working potentials of the alloys containing gallium can reach?1.3 V under current density ranging from 650 to 900 mA/cm2, while those of alloy without Ga are only?1.0 V. Such phenomenon is attributed to the solid solution which can form amalgam with aluminum matrix. Such an amalgam can form the hydrolyzed species during the discharge process and lead to the corrosion infiltrating into aluminum matrix.
基金financially supported by Anhui Provincial Natural Science Foundation (No. 1808085ME123)the Projects of International Cooperation and Exchanges in Anhui Provincial Key Project of Research and Development Plan (No.1804b06020363)the Priority Funding Scheme for Innovative Projects for Overseas Chinese Students in Anhui Province。
文摘The self-corrosion, electrochemical and discharge behavior of commercial purity Al anode via Mn modification in Al-air battery was studied by the hydrogen evolution, weight loss, electrical conductivity, electrochemical and discharge tests. Results show that the synergetic effects of the dissolved Mn and Mn-modifying Al_(3)Fe intermetallic decrease the weight loss and inhibit the hydrogen evolution of commercial purity Al in Na OH solution when minor Mn is introduced. However, more Mn addition leads to the formation of Al_6Mn intermetallic,which has little effect on the weight loss, but accelerates the hydrogen evolution. Mn introduction plays a positive role in activating Al anodes, resulting in a decrease in the anodic polarization and an increase in the discharge voltage. Among all the commercial purity Al-x Mn anodes, 0.1 wt% Mn addition exhibits the best discharge efficiency for Al-air battery.
基金supported by ONR(N00014-05-1-0338)NSF(DMR-0907580)
文摘We studied cycle time （0.01-10 s with triangular input waves） and poling history （continuous versus fresh poling） dependent electric energy storage and discharge behaviors in poly（vinylidene fluoride-co-hexafluoropropylene） [P（VDF- HFP）] films using the electric displacement -- the electric field （D-E） hysteresis loop measurements. Since the permanent dipoles in PVDF are orientational in nature, it is generally considered that both charging and discharging processes should be time and poling history dependent. Intriguingly, our experimental results showed that the charging process depended heavily on the cycle time and the prior poling history, and thus the D-E hysteresis loops had different shapes accordingly. However, the discharged energy density did not change no matter how the D-E loop shape varied due to different measurements. This experimental result could be explained in terms of reversible and irreversible polarizations. The reversible polarization could be charged and discharged fairly quickly （〈 5 ms for each process）, while the irreversible polarization depended heavily on the poling time and the prior poling history. This study suggests that it is only meaningful to compare the discharged energy density for PVDF and its copolymer films when different cycle times and poling histories are used.
基金Project(20973124)supported by the National Natural Science Foundation of ChinaProject supported by Key Laboratory of Superlight Materials and Surface Technology,Ministry of Education(Harbin Engineering University),China
文摘A novel type of porous magnesium electrode with a stable 3D copper foam as current collectors for the organic magnesium-air battery was prepared by both amperostatic and pulsed electrodeposition of magnesium on copper foam substrates in an electrolyte of 1 mol/L EtMgBr/THF solution, respectively. Optimal parameters of the pulsed electrodeposition were obtained using a bending cathode at the right angle. The surface morphology of the porous electrode was investigated by SEM, and the discharging performance of the porous magnesium electrode was detected by the chronoamperometric measurement. The electrochemical stability of 3D copper foam current collectors was examined by cyclic voltammetry, SEM and ICP-OES analyses. The results show that the rate capability of the porous magnesium electrode with a stable 3D copper foam as a current collector is better than that of the planar magnesium electrode, and the rate capability of the porous magnesium electrode prepared by the pulsed electrodeposition is superior to that of the porous magnesium electrode prepared by the amperostatic electrodeposition. The 3D structure of copper foam current collectors of the porous magnesium electrode could keep stable during the discharging process.
基金the financial support from the R&D Convergence Program of NST (National Research Council of Science & Technology) of Republic of Korea
文摘A new type of a high temperature liquid metal-air energy storage cell based on solid oxide electrolyte has been successfully demonstrated at 750 ℃ by feeding metal Sn. In order to understanding the initial size effect of metal as a liquid fuel, we report here the impact of the thermal and electrochemical oxidation behavior of nano Sn （-100 nm）, comparing with micro-sized （-5 μm） and macro-sized （4350 μm） Sn. The thermogravimetric analysis and the monitoring OCV test indicate that the distinct property of nano-sized Sn results in a favorable thermal oxidation behavior near the melting point and a promising power performance due to enhanced fuel transport to the anode. However, the accumulated Sn oxide at the reaction interface during a discharge test towards the limitation of further electrochemical oxidation.
