While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anod...A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anode dissolution kinetics.A Mg-air battery prepared using this anode exhibits a cell voltage of 1.626 V at 0.5 mA/cm^(2),reasonable anodic efficiency of 58.17%,and good specific energy of 1730.96 mW·h/g at 10 mA/cm^(2).This performance is attributed to the effective reactive anode surface,the suppressed chunk effect,and weak self-corrosion owing to the homogeneous basal texture.展开更多
This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but...This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but does not hinder the transfer of the electrons at the interface.Fortunately,the addition of Ce,La,and Ca into AZ63 alloy achieves this goal.The Mg-air battery with AZ63X anode in 3.5%Na Cl has an ultrahigh anodic efficiency of 85.7±1.7%and energy-density of 2431±53 mWh g^(-1)with the unique discharge product film,surpassing the values of most reported Mg-air batteries.Furthermore,the alloying elements reduce the anode delamination effect significantly by transforming the block Mg_(17)Al_(12)phase into the connected Mg_(17)Al_(12)structure and fine rod Al_(2)RE and Al_(2)Ca.展开更多
To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency...To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency,and energy are investigated for powders of different polarities.Although the powders have low charge-to-mass ratios(+0.087μC/kg for the positively charged powders and−0.26μC/kg for the negatively charged ones),electrostatic discharges occur approximately every 10 s,with the maximum discharge energy being 800 mJ.Powder polarity considerably influences discharge energy.The positive powders exhibit higher discharge energy than the negative ones,although discharge frequency remains similar for both.Effects of powder charge,humidity,and mass flow on discharge frequency and discharge energy are quantitatively analyzed,providing important insights for the improvement of safety in industrial powder handling.展开更多
Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mecha...Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mechanisms of discharge process under rotary conditions are discussed. The results demonstrate that when the high-voltage electrode is rotating,the distribution patterns of dielectric barrier discharge and the parameters of micro-discharge channels exhibit significant changes. Under a low rotating speed, the discharge patterns present as a series of separated discharge channels, resulting in uniform charge distribution but uneven electric field distribution in the gap. As the rotating speed increases, the electric field and the discharge channels will be affected by the rotation, so the electric field is more evenly distributed in the gap, and the discharge mode changes to a quasi-uniform discharge. With increasing distance from the rotation axis, the electric field strength gradually decreases, and the electric field force experienced by the micro-discharge channels during its formation weakens. Consequently, the average size of the micro-discharge channels increases, indicating that these channels are gradually stretched. The rotation of the electrode generates a significant number of accumulated charges, impacting the number of micro-discharge channels. The number of micro-discharge channels at the center of the electrode increases with rotating speed;however, due to channel stretching, the average size of the micro-discharge channels at the edge of the electrode also increases, leading to a decrease in their overall quantity. The research results reveal the significant impact of the electrode rotation on the characteristics of discharge channels, providing a theoretical basis for further optimal design of the rotating dielectric barrier discharge in various application.展开更多
Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recen...Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recent years.The dams that supply water to most regions of Morocco have faced periods of drought.This led the government to start a large-scale seawater desalination project that shall produce over 2 MM m^(3)/year.The most common environmental impact associated with desalination plants is the high concentration brine discharge which can alter the physical,chemical,and biological properties of the receiving water body,In fact,the increasing number of desalination plants along the coastline amplifies the potential risks that brine discharges pose to marine ecosystems.This highlights the critical need for regulations to manage pollutant concentrations in water,both at the discharge point(Effluent Standards-ES)and in the receiving environment(Ambient Standards-AS).Law 36-15,in its Article 72,grants any natural or legal person,whether public or private,the right to carry out seawater desalination to meet their own water needs or those of other users,in accordance with current legislation and regulations.However,the definition of regulations concerning marine environmental aspects and the substantial limits for discharges has not yet been specified.Indeed,these regulations will need to be developed with due consideration for the local biodiversity.These regulations should also take into account the technical criteria required to determine the compliance point and define the boundaries of the brine discharge impact zone.展开更多
Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was d...Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.展开更多
The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density ...The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.展开更多
Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with ...Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with microwave discharge ion thrusters(which do not require a hollow cathode and are capable of efficient ionization at low pressures).Comparative experiments with different anode structures and single-probe diagnostics revealed that applying a DC bias voltage created a new ionization zone based on microwave discharge.This DC bias increased the sheath potential of the screen grid and led to an elevation in electron temperature and plasma density.It is speculated that the reduced loss of high-energy electrons generated by microwave discharge at the screen grid is the primary reason for the enhanced discharge.By adding a DC bias of approximately 50 V to the microwave discharge,the screen grid current was doubled without a significant increase in discharge power consumption.Under appropriate bias voltages that consider minimizing ion sputtering,DC bias holds promise as a design approach to increase the extracted beam current in microwave ion thrusters.展开更多
Objective:To determine the relationship between the color of vaginal discharge and the volume of vaginal discharge and the types of microorganisms in the genital organs.Methods:Cross-sectional study by conducting vagi...Objective:To determine the relationship between the color of vaginal discharge and the volume of vaginal discharge and the types of microorganisms in the genital organs.Methods:Cross-sectional study by conducting vaginal swab examinations on 56 women with complaints of vaginal discharge in Bareng Lor Village,Klaten,and Sewugalur,Kulon Progo,Indonesia.A vaginal swab was carried out with a Gram examination.Data were coded and analyzed using the chi-c test.Results:The color of vaginal discharge was divided into:non-vaginal discharge 16.1%(9/56),white/clear/mucoid 50%(28/56),greenish/white 14.3%(8/56),brownish white/brown 3.6%(2/56),powdery and white 3.6%(2/56),post coitus bleeding 7.1%(4/56),and other complaints(itching,odor,erosion)5.4%(3/56).The volume of vaginal discharge was divided into:normal 16.1%(9/56),a little 48.2%(27/56),and a lot 35.7%(20/56).The types of microorganisms obtained were:no microorganisms growing 8.9%(5/56),Gram positive cocci/bacilli 7.1%(4/56),Gram negative cocci/bacilli 19.6%(11/56),Gram positive/negative coccobacilli 7.1%(4/56),growth of>2 bacteria 42.9%(24/56),and fungus/yeast cells/clue cells 14.3%(8/56).There is a significant relationship between volume and type of microorganisms(P=0.011),while the relationship between color/type of vaginal discharge and microorganisms is not significantly related.Conclusions:The volume of vaginal discharge reflects the presence of risky microorganisms.展开更多
To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and inst...To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and installing overflow holes in the dividing wall.A three-dimensional turbulent model was developed using ANSYS Fluent to simulate the hydraulic characteristics of both traditional and new baffle-drop shafts across various flow rates.The simulation results demonstrated that the new shaft design allowed for discharge from both the wet and dry sides,significantly improving operational capacity,with the dry side capable of handling 40%of the inlet flow.Compared to the traditional shaft,the new design reduced shaft wall pressures and decreased the mean and standard deviation of pressure on typical baffles by 21%and 63%,respectively,therefore enhancing structural safety.Additionally,the new shaft achieved a 2%-12%higher energy dissipation rate than the traditional shaft across different flow rates.This study offers valuable insights for the design and optimization of drop shafts in deep tunnel drainage systems.展开更多
The air gap at the interface inside the cable terminations for high-speed trains and the partial discharge caused by it are two important factors affecting the insulating performance.The development of air gap and par...The air gap at the interface inside the cable terminations for high-speed trains and the partial discharge caused by it are two important factors affecting the insulating performance.The development of air gap and partial discharge will eventually lead to breakdown faults.To investigate the evolutionary characteristics of the air gap and partial discharge,the simulation models and samples of cable terminations containing defects are constructed in this paper.By analysing the variation law of the electric field and the multidimensional information of partial discharge,the evolution process of the air gap is divided into four wellcharacterised stages.Especially in the third stage,the partial discharge extinction voltage is 51.41%lower than that of the defect-free samples and even lower than the working voltage.The asymmetry of discharge is the most significant factor.The volume of discharge in the third quadrant is significantly higher than that in the first quadrant.This important feature can be applied to the inspection and evaluation of the insulating state of the cable terminations.The partial discharge characteristics of the air gap revealed in this paper are proposed to provide an important theoretical supplement to the study of interface discharges between heterogeneous dielectrics.展开更多
Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone t...Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone to passivation,owing to GeO_(2) accumulation on its surface,resulting in premature discharge termination.In this study,various nano-Ge pyramid structures(GePS)were prepared using chemical etching(CE)and metal-assisted chemical etching(MACE)methods to enhance the specific surface area of the Ge anode,thereby facilitating the dissolution of the passivation layer.This study revealed that the MACE method significantly accelerated the etching rate of the Ge surface,producing exceptional GePS.Furthermore,Ge-air batteries employing Ge anodes prepared using MACE demonstrated an exceptional discharge life of up to 9240 h(385 days).The peak power density reached 3.03mW/cm^(2),representing improvements of more than 2 times and 1.8 times,respectively,compared with batteries using flat Ge anodes.This study presents a straightforward approach to enhance Ge anode performance,thereby expanding the potential applications of Ge-air batteries.展开更多
The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of a...The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of ammonia are measured.The results show that the consumption of NH_(3)/O_(2)and the production of N_(2)/H_(2)change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low temperatures.Secondly,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is established.Based on the reaction path analysis,the simplified mechanism is obtained.The detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified mechanism.Finally,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key species.The results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of species.The consumption of NH_(3)by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O(1S).However,within the sheath,almost all reactions do not occur.Further,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and pre-sheath.Furthermore,the discharge interval has little effect on the sheath structure and gas mixture breakdown.The research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore the influence of transport and chemical reaction kinetics on the oxidative pyrolysis of ammonia.展开更多
Breakage is an important step in the resource processing chain.However,the mechanical crushing methods commonly used today suffer from low energy efficiency and high dust levels.Promoting environmental protection and ...Breakage is an important step in the resource processing chain.However,the mechanical crushing methods commonly used today suffer from low energy efficiency and high dust levels.Promoting environmental protection and improving energy efficiency are crucial to advancing China’s circular economy.Mining companies are actively exploring novel and innovative technologies to significantly cut down on operating costs and minimize emissions of dust and pollutants generated during processing.Recently,high voltage pulse discharge(HVPD)technology has received widespread attention and has been reported to have good application prospects in resource processing.This paper presents an extensive review of the operational principles of HVPD and the unique characteristics it engenders,such as non-polluting,selective material fragmentation,pre-weakening,pre-concentration,and enhanced permeability of coal seams.Additionally,this review explores the potential and obstacles confronting HVPD in industrial contexts,offering fresh insights for HVPD optimization and providing guidance and prospects for industrial deployment and further development.展开更多
The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicy...The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicylic acid(SAL),2,6-dihydroxybenzoic acid(2,6-DHB),and 5-sulfoisophthalic acid(5-sulfoSAL)were selected as potential candidates.Through electrochemical tests,full-cell discharge experiments,and physicochemical characterization,the impact of these complexing agents on the discharge performance of magnesium-air batteries using AZ31 alloy as the anode material was investigated.The results demonstrated that the four complexing agents increased the discharge voltage of the batteries.Notably,SAL could significantly improve the anodic efficiency and the discharge specific capacity,achieving an anodic efficiency of 60.3%and a specific capacity of 1358.3 mA·h/g at a discharge current density of 10 mA/cm^(2).展开更多
The heat transfer coefficient of the water surface is an important parameter in the design of thermal discharge in nuclear power plant engineering.In this study,in situ observations were performed in the northwestern ...The heat transfer coefficient of the water surface is an important parameter in the design of thermal discharge in nuclear power plant engineering.In this study,in situ observations were performed in the northwestern South China Sea near a coastal nuclear power plant to evaluate the applicability of heat transfer coefficient calculation algorithms commonly used in marine thermal discharge engineering in China.The results show that the Regulation for Hydraulic and Thermal Model in Cooling Water Projects(SL 160-2012)is not applicable in calculating the heat transfer coefficient in offshore areas.SL 160-2012 significantly overestimates the heat loss at the sea surface.However,Code for Design of Cooling for Industrial Recirculating Water(GB/T 50102-2014)performs well,and its estimation coefficient is roughly consistent with the estimations of the COARE 3.6 bulk algorithm,which is extensively used in physical oceanography for calculating air-sea heat fluxes,and the Gunneberg formula.In a 3-day observation,the average heat transfer coefficients estimated using these three algorithms were 50.4,48.5,and 48.8 W m^(-2)℃^(-1),respectively,with a deviation of less than 4% among them,whereas that estimated using SL 160-2012 was as high as 176.3 W m^(-2)℃^(-1).The abnormally large value of SL 160-2012 is due to its additional cooling term,which is artificially increased by 100 times because of the incorrect unit conversion used when developing the regulation.If this error is corrected,the value will decrease to 50.5 W m^(-2)℃^(-1),which is very close to the estimation of GB/T 50102-2014.展开更多
Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge ma...Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge machining(EDM)can achieve high-quality machining of microstructures on high-hardness mold steel inserts.This can reduce the manufacturing cost of microfluidic chip molds and extend the service life of molds.However,the EDM process is susceptible to the formation of poor-quality surfaces due to the occurrence of abnormal discharges.To address this issue,this paper presents in-depth research on a novel ultrasonic cavitation-assisted electrical discharge machining method.An ultrasonic transducer is placed in an electrical discharge working fluid to promote the removal of electrical corrosion products through the cavitation effect of the liquid.This can also reduce the occurrence of poor discharge,thereby improving the machining surface quality.The aluminum foil corrosion method is employed to investigate the distribution of ultrasonic action in the electric discharge working fluid.The attenuation law of ultrasonic action in the electric discharge working fluid is also investigated.The range of ultrasonic action is determined,providing a reference for subsequent ultrasonic vibration electric discharge working fluid processing experiments.The results of the aluminum foil tests are used to inform the selection of NAK80 mold steel as the experimental object.The effects of cavitation at three ultrasonic frequencies on the surface microstructure are investigated.The experimental results indicate that ultrasonic cavitation can facilitate the movement of corrosion products in electrical machining,reduce the occurrence of abnormal discharges caused by carbon deposition or the secondary re-melting of metals,and thereby enhance the machining surface quality.展开更多
To the editor:Peer workers-people with personal experiences of using mental health services,trained to provide support to others currently using similar services--are increasingly integrated into the workforce of ment...To the editor:Peer workers-people with personal experiences of using mental health services,trained to provide support to others currently using similar services--are increasingly integrated into the workforce of mental health systems internationally.展开更多
A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between ...A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between morphology and vegetation under similar tidal conditions.Our analysis of correlations and inferences revealed several significant trends in the SRD:(1)an overall expansion of land area and intertidal vegetation,with the most pronounced changes occurring in the eastern sector;(2)the predominance of river discharge influencing the southwestern and northern sectors,contrasted with the primary impact of storm surges in the eastern sector;and(3)three distinct causal relationships among estuarine morphology,vegetation,storm surges,and river discharge:a direct model where river discharge shapes estuarine morphology,a progressive model in which river discharge affects vegetation distribution,subsequently influencing estuarine morphology,and a hybrid model where storm surges directly impact vegetation and indirectly modify its distribution through changes in estuarine morphology.The stability of sediment supply and the role of intertidal vegetation are crucial for the continuous seaward advance,providing a vital foundation for the protection and development of estuarine deltas.展开更多
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
基金partially supported by the National Natural Science Foundation of China(No.51901153)Shanxi Scholarship Council of China(No.2019032)+1 种基金the Natural Science Foundation of Shanxi,China(No.202103021224049)the Shanxi Zhejiang University New Materials and Chemical Research Institute Scientific Research Project,China(No.2022SX-TD025)。
文摘A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anode dissolution kinetics.A Mg-air battery prepared using this anode exhibits a cell voltage of 1.626 V at 0.5 mA/cm^(2),reasonable anodic efficiency of 58.17%,and good specific energy of 1730.96 mW·h/g at 10 mA/cm^(2).This performance is attributed to the effective reactive anode surface,the suppressed chunk effect,and weak self-corrosion owing to the homogeneous basal texture.
基金supported by the National Natural Science Foundation of China(52471095)National Key Research and Development Program of China(Grant No.2023YFC2811404)Natural Science Foundation of Xiamen,China(No.3502Z20227015)。
文摘This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but does not hinder the transfer of the electrons at the interface.Fortunately,the addition of Ce,La,and Ca into AZ63 alloy achieves this goal.The Mg-air battery with AZ63X anode in 3.5%Na Cl has an ultrahigh anodic efficiency of 85.7±1.7%and energy-density of 2431±53 mWh g^(-1)with the unique discharge product film,surpassing the values of most reported Mg-air batteries.Furthermore,the alloying elements reduce the anode delamination effect significantly by transforming the block Mg_(17)Al_(12)phase into the connected Mg_(17)Al_(12)structure and fine rod Al_(2)RE and Al_(2)Ca.
基金The National Natural Science Foundation of China(No.51976039)。
文摘To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency,and energy are investigated for powders of different polarities.Although the powders have low charge-to-mass ratios(+0.087μC/kg for the positively charged powders and−0.26μC/kg for the negatively charged ones),electrostatic discharges occur approximately every 10 s,with the maximum discharge energy being 800 mJ.Powder polarity considerably influences discharge energy.The positive powders exhibit higher discharge energy than the negative ones,although discharge frequency remains similar for both.Effects of powder charge,humidity,and mass flow on discharge frequency and discharge energy are quantitatively analyzed,providing important insights for the improvement of safety in industrial powder handling.
基金Project supported by the National Natural Science Foundation of China (Grant No. 52377135)。
文摘Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mechanisms of discharge process under rotary conditions are discussed. The results demonstrate that when the high-voltage electrode is rotating,the distribution patterns of dielectric barrier discharge and the parameters of micro-discharge channels exhibit significant changes. Under a low rotating speed, the discharge patterns present as a series of separated discharge channels, resulting in uniform charge distribution but uneven electric field distribution in the gap. As the rotating speed increases, the electric field and the discharge channels will be affected by the rotation, so the electric field is more evenly distributed in the gap, and the discharge mode changes to a quasi-uniform discharge. With increasing distance from the rotation axis, the electric field strength gradually decreases, and the electric field force experienced by the micro-discharge channels during its formation weakens. Consequently, the average size of the micro-discharge channels increases, indicating that these channels are gradually stretched. The rotation of the electrode generates a significant number of accumulated charges, impacting the number of micro-discharge channels. The number of micro-discharge channels at the center of the electrode increases with rotating speed;however, due to channel stretching, the average size of the micro-discharge channels at the edge of the electrode also increases, leading to a decrease in their overall quantity. The research results reveal the significant impact of the electrode rotation on the characteristics of discharge channels, providing a theoretical basis for further optimal design of the rotating dielectric barrier discharge in various application.
文摘Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recent years.The dams that supply water to most regions of Morocco have faced periods of drought.This led the government to start a large-scale seawater desalination project that shall produce over 2 MM m^(3)/year.The most common environmental impact associated with desalination plants is the high concentration brine discharge which can alter the physical,chemical,and biological properties of the receiving water body,In fact,the increasing number of desalination plants along the coastline amplifies the potential risks that brine discharges pose to marine ecosystems.This highlights the critical need for regulations to manage pollutant concentrations in water,both at the discharge point(Effluent Standards-ES)and in the receiving environment(Ambient Standards-AS).Law 36-15,in its Article 72,grants any natural or legal person,whether public or private,the right to carry out seawater desalination to meet their own water needs or those of other users,in accordance with current legislation and regulations.However,the definition of regulations concerning marine environmental aspects and the substantial limits for discharges has not yet been specified.Indeed,these regulations will need to be developed with due consideration for the local biodiversity.These regulations should also take into account the technical criteria required to determine the compliance point and define the boundaries of the brine discharge impact zone.
基金supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province (No. 1003016001)。
文摘Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51077032).
文摘The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.
基金National Key R&D Program of China(No.2020YFC2201000).
文摘Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with microwave discharge ion thrusters(which do not require a hollow cathode and are capable of efficient ionization at low pressures).Comparative experiments with different anode structures and single-probe diagnostics revealed that applying a DC bias voltage created a new ionization zone based on microwave discharge.This DC bias increased the sheath potential of the screen grid and led to an elevation in electron temperature and plasma density.It is speculated that the reduced loss of high-energy electrons generated by microwave discharge at the screen grid is the primary reason for the enhanced discharge.By adding a DC bias of approximately 50 V to the microwave discharge,the screen grid current was doubled without a significant increase in discharge power consumption.Under appropriate bias voltages that consider minimizing ion sputtering,DC bias holds promise as a design approach to increase the extracted beam current in microwave ion thrusters.
基金supported by Hibah pengabdian masyarakat internal UMY tahun 2023/2024(No.ID CJ4487-MyHAM).
文摘Objective:To determine the relationship between the color of vaginal discharge and the volume of vaginal discharge and the types of microorganisms in the genital organs.Methods:Cross-sectional study by conducting vaginal swab examinations on 56 women with complaints of vaginal discharge in Bareng Lor Village,Klaten,and Sewugalur,Kulon Progo,Indonesia.A vaginal swab was carried out with a Gram examination.Data were coded and analyzed using the chi-c test.Results:The color of vaginal discharge was divided into:non-vaginal discharge 16.1%(9/56),white/clear/mucoid 50%(28/56),greenish/white 14.3%(8/56),brownish white/brown 3.6%(2/56),powdery and white 3.6%(2/56),post coitus bleeding 7.1%(4/56),and other complaints(itching,odor,erosion)5.4%(3/56).The volume of vaginal discharge was divided into:normal 16.1%(9/56),a little 48.2%(27/56),and a lot 35.7%(20/56).The types of microorganisms obtained were:no microorganisms growing 8.9%(5/56),Gram positive cocci/bacilli 7.1%(4/56),Gram negative cocci/bacilli 19.6%(11/56),Gram positive/negative coccobacilli 7.1%(4/56),growth of>2 bacteria 42.9%(24/56),and fungus/yeast cells/clue cells 14.3%(8/56).There is a significant relationship between volume and type of microorganisms(P=0.011),while the relationship between color/type of vaginal discharge and microorganisms is not significantly related.Conclusions:The volume of vaginal discharge reflects the presence of risky microorganisms.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFD1700802).
文摘To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and installing overflow holes in the dividing wall.A three-dimensional turbulent model was developed using ANSYS Fluent to simulate the hydraulic characteristics of both traditional and new baffle-drop shafts across various flow rates.The simulation results demonstrated that the new shaft design allowed for discharge from both the wet and dry sides,significantly improving operational capacity,with the dry side capable of handling 40%of the inlet flow.Compared to the traditional shaft,the new design reduced shaft wall pressures and decreased the mean and standard deviation of pressure on typical baffles by 21%and 63%,respectively,therefore enhancing structural safety.Additionally,the new shaft achieved a 2%-12%higher energy dissipation rate than the traditional shaft across different flow rates.This study offers valuable insights for the design and optimization of drop shafts in deep tunnel drainage systems.
基金supported by National Natural Science Foundation of China,Grant/Award Number:52377161.
文摘The air gap at the interface inside the cable terminations for high-speed trains and the partial discharge caused by it are two important factors affecting the insulating performance.The development of air gap and partial discharge will eventually lead to breakdown faults.To investigate the evolutionary characteristics of the air gap and partial discharge,the simulation models and samples of cable terminations containing defects are constructed in this paper.By analysing the variation law of the electric field and the multidimensional information of partial discharge,the evolution process of the air gap is divided into four wellcharacterised stages.Especially in the third stage,the partial discharge extinction voltage is 51.41%lower than that of the defect-free samples and even lower than the working voltage.The asymmetry of discharge is the most significant factor.The volume of discharge in the third quadrant is significantly higher than that in the first quadrant.This important feature can be applied to the inspection and evaluation of the insulating state of the cable terminations.The partial discharge characteristics of the air gap revealed in this paper are proposed to provide an important theoretical supplement to the study of interface discharges between heterogeneous dielectrics.
基金financially supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+2 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Germanium(Ge)-air battery,a new type of semiconductor-air battery,has garnered increasing attention owing to its environmental friendliness,safety,and excellent dynamic performance.However,the flat Ge anode is prone to passivation,owing to GeO_(2) accumulation on its surface,resulting in premature discharge termination.In this study,various nano-Ge pyramid structures(GePS)were prepared using chemical etching(CE)and metal-assisted chemical etching(MACE)methods to enhance the specific surface area of the Ge anode,thereby facilitating the dissolution of the passivation layer.This study revealed that the MACE method significantly accelerated the etching rate of the Ge surface,producing exceptional GePS.Furthermore,Ge-air batteries employing Ge anodes prepared using MACE demonstrated an exceptional discharge life of up to 9240 h(385 days).The peak power density reached 3.03mW/cm^(2),representing improvements of more than 2 times and 1.8 times,respectively,compared with batteries using flat Ge anodes.This study presents a straightforward approach to enhance Ge anode performance,thereby expanding the potential applications of Ge-air batteries.
基金Fundamental Research Funds for the Central Universities(M23JBZY00050)National Natural Science Foundation of China(22278032)。
文摘The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of ammonia are measured.The results show that the consumption of NH_(3)/O_(2)and the production of N_(2)/H_(2)change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low temperatures.Secondly,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is established.Based on the reaction path analysis,the simplified mechanism is obtained.The detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified mechanism.Finally,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key species.The results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of species.The consumption of NH_(3)by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O(1S).However,within the sheath,almost all reactions do not occur.Further,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and pre-sheath.Furthermore,the discharge interval has little effect on the sheath structure and gas mixture breakdown.The research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore the influence of transport and chemical reaction kinetics on the oxidative pyrolysis of ammonia.
基金Foundation item:Project(2023YFC2909000) supported by the National Key R&D Program for Young Scientists,ChinaProject(2023JH3/10200010) supported by the Excellent Youth Natural Science Foundation of Liaoning Province,China+3 种基金Project (XLYC2203167) supported by the Liaoning Revitalization Talents Program,ChinaProject(RC231175) supported by the Mid-career and Young Scientific and Technological Talents Program of Shenyang,ChinaProject(2023A03003-2) supported by the Key Special Program of Xinjiang,ChinaProject(N2301026) supported by the Fundamental Research Funds for the Central Universities,China。
文摘Breakage is an important step in the resource processing chain.However,the mechanical crushing methods commonly used today suffer from low energy efficiency and high dust levels.Promoting environmental protection and improving energy efficiency are crucial to advancing China’s circular economy.Mining companies are actively exploring novel and innovative technologies to significantly cut down on operating costs and minimize emissions of dust and pollutants generated during processing.Recently,high voltage pulse discharge(HVPD)technology has received widespread attention and has been reported to have good application prospects in resource processing.This paper presents an extensive review of the operational principles of HVPD and the unique characteristics it engenders,such as non-polluting,selective material fragmentation,pre-weakening,pre-concentration,and enhanced permeability of coal seams.Additionally,this review explores the potential and obstacles confronting HVPD in industrial contexts,offering fresh insights for HVPD optimization and providing guidance and prospects for industrial deployment and further development.
基金supported by the National Natural Science Foundation of China(No.52001015)the Urban Carbon Neutral Science Innovation Foundation of Beijing University of Technology,China(No.053000514124601)the Science and Technology Program of Beijing Municipal Education Commission,China(No.KM201810005007).
文摘The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicylic acid(SAL),2,6-dihydroxybenzoic acid(2,6-DHB),and 5-sulfoisophthalic acid(5-sulfoSAL)were selected as potential candidates.Through electrochemical tests,full-cell discharge experiments,and physicochemical characterization,the impact of these complexing agents on the discharge performance of magnesium-air batteries using AZ31 alloy as the anode material was investigated.The results demonstrated that the four complexing agents increased the discharge voltage of the batteries.Notably,SAL could significantly improve the anodic efficiency and the discharge specific capacity,achieving an anodic efficiency of 60.3%and a specific capacity of 1358.3 mA·h/g at a discharge current density of 10 mA/cm^(2).
基金supported by the Laoshan Laboratory(No.LSKJ202201600)the National Natural Science Foundation of China(No.41821004)。
文摘The heat transfer coefficient of the water surface is an important parameter in the design of thermal discharge in nuclear power plant engineering.In this study,in situ observations were performed in the northwestern South China Sea near a coastal nuclear power plant to evaluate the applicability of heat transfer coefficient calculation algorithms commonly used in marine thermal discharge engineering in China.The results show that the Regulation for Hydraulic and Thermal Model in Cooling Water Projects(SL 160-2012)is not applicable in calculating the heat transfer coefficient in offshore areas.SL 160-2012 significantly overestimates the heat loss at the sea surface.However,Code for Design of Cooling for Industrial Recirculating Water(GB/T 50102-2014)performs well,and its estimation coefficient is roughly consistent with the estimations of the COARE 3.6 bulk algorithm,which is extensively used in physical oceanography for calculating air-sea heat fluxes,and the Gunneberg formula.In a 3-day observation,the average heat transfer coefficients estimated using these three algorithms were 50.4,48.5,and 48.8 W m^(-2)℃^(-1),respectively,with a deviation of less than 4% among them,whereas that estimated using SL 160-2012 was as high as 176.3 W m^(-2)℃^(-1).The abnormally large value of SL 160-2012 is due to its additional cooling term,which is artificially increased by 100 times because of the incorrect unit conversion used when developing the regulation.If this error is corrected,the value will decrease to 50.5 W m^(-2)℃^(-1),which is very close to the estimation of GB/T 50102-2014.
基金supported by the Higher Education Science and Technology Innovation Project of Shanxi Province(No.2022L706)Natural Science Foundation of Jiangsu Province(No.BK20210755).
文摘Polymer microfluidic chips are a common tool in biomedical research,and the production of mold inserts with microscale structures represents a crucial step in the precise molding of these chips.Electrical discharge machining(EDM)can achieve high-quality machining of microstructures on high-hardness mold steel inserts.This can reduce the manufacturing cost of microfluidic chip molds and extend the service life of molds.However,the EDM process is susceptible to the formation of poor-quality surfaces due to the occurrence of abnormal discharges.To address this issue,this paper presents in-depth research on a novel ultrasonic cavitation-assisted electrical discharge machining method.An ultrasonic transducer is placed in an electrical discharge working fluid to promote the removal of electrical corrosion products through the cavitation effect of the liquid.This can also reduce the occurrence of poor discharge,thereby improving the machining surface quality.The aluminum foil corrosion method is employed to investigate the distribution of ultrasonic action in the electric discharge working fluid.The attenuation law of ultrasonic action in the electric discharge working fluid is also investigated.The range of ultrasonic action is determined,providing a reference for subsequent ultrasonic vibration electric discharge working fluid processing experiments.The results of the aluminum foil tests are used to inform the selection of NAK80 mold steel as the experimental object.The effects of cavitation at three ultrasonic frequencies on the surface microstructure are investigated.The experimental results indicate that ultrasonic cavitation can facilitate the movement of corrosion products in electrical machining,reduce the occurrence of abnormal discharges caused by carbon deposition or the secondary re-melting of metals,and thereby enhance the machining surface quality.
基金funded by National Institute for Health Research(NIHR)(RP-PG-1212-20019)。
文摘To the editor:Peer workers-people with personal experiences of using mental health services,trained to provide support to others currently using similar services--are increasingly integrated into the workforce of mental health systems internationally.
基金National Natural Science Foundation of China,No.41906148,No.42271086Rejuvenating Yunnan Talents Support Plan Young Talent Program,No.XDYC-QNRC-2023-0322。
文摘A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between morphology and vegetation under similar tidal conditions.Our analysis of correlations and inferences revealed several significant trends in the SRD:(1)an overall expansion of land area and intertidal vegetation,with the most pronounced changes occurring in the eastern sector;(2)the predominance of river discharge influencing the southwestern and northern sectors,contrasted with the primary impact of storm surges in the eastern sector;and(3)three distinct causal relationships among estuarine morphology,vegetation,storm surges,and river discharge:a direct model where river discharge shapes estuarine morphology,a progressive model in which river discharge affects vegetation distribution,subsequently influencing estuarine morphology,and a hybrid model where storm surges directly impact vegetation and indirectly modify its distribution through changes in estuarine morphology.The stability of sediment supply and the role of intertidal vegetation are crucial for the continuous seaward advance,providing a vital foundation for the protection and development of estuarine deltas.
