The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor ...The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.展开更多
The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstru...The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.展开更多
在相干信号波达方向(direction of arrival,DOA)估计中,当阵列接收到的相干信号处于低信噪比时,DOA估计性能会大大降低。针对该问题,提出一种增强的时空平滑(enhanced spatio-temporal smoothing,ESTS)算法,在使用时空相关矩阵重构接收...在相干信号波达方向(direction of arrival,DOA)估计中,当阵列接收到的相干信号处于低信噪比时,DOA估计性能会大大降低。针对该问题,提出一种增强的时空平滑(enhanced spatio-temporal smoothing,ESTS)算法,在使用时空相关矩阵重构接收数据矩阵的时空平滑(spatio-temporal smoothing,STS)方法的基础上进行了改进。首先对子阵列时空相关矩阵进行平方预处理,然后通过充分利用子阵列时空相关矩阵的协方差和互协方差信息解相干,提高了相干信号的分辨率以及对噪声扰动的鲁棒性。理论分析和统计结果均表明,与其他空间平滑类解相干方法相比,该方法提高了在低信噪比、少快拍数、小角度分离情况下的相干信号DOA估计的去相关性能。展开更多
Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usu...Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.展开更多
With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving...With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving mechanism was still unclear.In this study,direct disintegration of biopolymers and indirect broken of connection point were investigated on the hydrolysis and component separation.Three typical sewer sediment treatment approaches,i.e.,alkaline,thermal and cation exchange treatments were proposed,which represented the hydrolysis-driving forces of chemical hydrolysis,physical hydrolysis and innovative cation bridging break-age.The results showed that the organic and inorganic separation rates of sewer sediment driven by alkaline,thermal and cation exchange treatments reached 21.26%,23.80%,and 19.56%-48.0%,respectively,compared to 4.43%in control.The secondary structure of proteins was disrupted,transitioning from𝛼α-helix to𝛽β-turn and random coil.Meanwhile,much biopolymers were released from solid to the liquid phase.From thermody-namic perspective,sewer sediment deposition was controlled by short-range interfacial interactions described by extended Derjaguin-Landau-Verwey-Overbeek theory.Additionally,the separation of organic and inorganic components was positively correlated with the thermodynamic parameters(Corr=0.87),highlighted the robust-ness of various driving forces.And the flocculation energy barriers were 2.40(alkaline),1.60 times(thermal),and 4.02–4.97 times(cation exchange)compared to control group.The findings revealed the contrition differ-ence of direct disintegration of gelatinous biopolymers and indirect breakage of composition connection sites in sediment composition separation,filling the critical gaps in understanding the specific mechanisms of sediment biopolymer disintegration and intermolecular connection breakage.展开更多
The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a...The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.展开更多
The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant ch...The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant challenges,including high energy consumption,environmental pollution,and inefficient critical metals recovery.In contrast,advanced direct recycling can selectively extract valuable metals while preserving cathode structure,achieving over 99%lithium recovery from lithium iron phosphate.Moreover,by directly repairing defects and crystal structures of spent materials,their electrochemical performance can be effectively restored.Due to significantly reduced energy and reagent inputs,direct recycling cuts processing costs by over 20% and reduces waste emissions by at least 40% compared to conventional methods,making it a promising low-carbon alternative.This review systematically integrates the recent advances in direct recycling of spent batteries as well as the limitations and challenges of existing technologies,and proposes future research pathways to promote resource recycling and sustainable development.展开更多
Objective:To explore the interventional room nursing and its application effects in patients with ischemic stroke treated with tirofiban combined with direct thrombectomy.Methods:A total of 61 patients with ischemic s...Objective:To explore the interventional room nursing and its application effects in patients with ischemic stroke treated with tirofiban combined with direct thrombectomy.Methods:A total of 61 patients with ischemic stroke admitted to our hospital from June 2024 to June 2025 were selected and divided into two groups using the red and blue ball method:the control group(n=30,receiving routine interventional room nursing)and the observation group(n=31,receiving additional tirofiban medication-specific nursing+individualized interventional nursing on the basis of routine nursing).The cerebral hemodynamic indicators,adverse reactions,effectiveness of complication nursing,and nursing satisfaction were compared between the two groups.Results:After 7 days of treatment,the observation group had lower cerebrovascular peripheral resistance and higher mean blood flow velocity and mean blood flow volume compared to the control group(all p<0.05).The observation group had a higher effectiveness rate of complication nursing than the control group,with a statistically significant difference(p<0.05).The nursing satisfaction in the observation group(96.77%)was higher than that in the control group(80.00%),with a statistically significant difference(χ^(2)=4.223,p=0.040<0.05).Conclusion:Tirofiban combined with direct thrombectomy can significantly improve cerebral hemodynamics,enhance the effectiveness of complication nursing,and increase patient satisfaction in patients with ischemic stroke.展开更多
BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Resear...BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.展开更多
A core-shell type Co_(19)-added polyoxometalate H_(17)Na_(4)Cs_(21)[Co_(19)(μ_(3)-OH)_(12)(A-α-SiW_(10)O_(37))_(6)]·8 Cl·12H_(2)O(1)has been made under hydrothermal conditions guided by the lacunary direct...A core-shell type Co_(19)-added polyoxometalate H_(17)Na_(4)Cs_(21)[Co_(19)(μ_(3)-OH)_(12)(A-α-SiW_(10)O_(37))_(6)]·8 Cl·12H_(2)O(1)has been made under hydrothermal conditions guided by the lacunary directing synthetic strategy.Single crystal X-ray diffraction(SXRD)has shown that 19 Co^(2+)are arranged in a flat plane through edge sharing in a mode of 3-4-5-4-3,forming a core-shell type polyanion cluster{Co_(19)(SiW_(10))_6}with a diameter of approximately 2.24 nm.Visible-light-driven photocatalytic hydrogen evolution performance studies have shown that 1 is an efficient heterogeneous water reduction catalyst(WRC)with the H_(2)evolution rate of 2902.5μmol h^(-1)g^(-1).Moreover,the cycle tests indicated that 1 was also a good heterogeneous catalyst.展开更多
Biopolymeric nanocomposites have attracted considerable attention because of their biocompatibility,biodegradability,and unique physicochemical properties.It is essential to manufacture three-dimensional(3D)biocompati...Biopolymeric nanocomposites have attracted considerable attention because of their biocompatibility,biodegradability,and unique physicochemical properties.It is essential to manufacture three-dimensional(3D)biocompatible micro/nanostructures using biopolymeric nanocomposites.Herein,we demonstrate the high-fidelity fabrication of biocompatible 3D features with sub-50 nm resolution using femtosecond laser direct writing(FsLDW)of a biopolymeric nanocomposite composed of egg white and sulfonated graphene(S-graphene).The biopolymer nanocomposite acts as a negative photoresist suitable for water-based lithography.The introduction of S-graphene not only dramatically lowered the laser power threshold but also significantly modulated the morphology of the 3D features constructed by FsLDW.Microstructures with porous,rough,or smooth morphologies were obtained by optimizing the S-graphene concentration and laser scanning speed.The fabricated egg-white/S-graphene microstructures exhibited biocompatibility and environmental degradability.Egg white/S-graphene was also employed to fabricate diffractive gratings with superior optical quality.This study provides a promising method to manufacture biocompatible 3D features with controllable morphology,which has potential applications in biological and photonic fields.展开更多
For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add c...For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add channels to the non-reciprocal optical device and the non-reciprocity can route optical signals and prevent the reverse flow of noise.Using the Scully–Lamb model and gain saturation effect,we accomplish dual-frequency non-reciprocal transmission by introducing nonlinearity into a linear array of four-mode resonators.The accomplishment is directly demonstrated by the non-reciprocal transmission phenomena present in the non-divergent peaks.For example,a directional cyclic amplifier is constructed with non-reciprocal units.Regarding potential applications,non-reciprocal optical systems can be employed in dual-frequency control,parallel information processing,photonic integrated circuits,optical devices and so on.展开更多
The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-m...The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-middle Miocene deformed rocks of the inter-Andean valley between the Western and Central Cordilleras of Colombia.However,uncertainty remains about the age of the latest accretionary phases of the Panama-ChocóBlock.Poorly studied late Miocene volcanic rocks within the northern inter-Andean valley may provide key information to constrain the temporality of that final collision.Here,we study the deformational features of the~12-6 Ma extrusive rocks of the Combia Volcanic Province located in the northwestern Andes(Colombia).We present anisotropy of magnetic susceptibility(AMS)data for pyroclastic and volcanic rocks within the AmagáBasin,an inter-Andean depression with Oligocene-middle Miocene sedimentary rocks that recorded NW-SE compression and NE-SW simple shear caused by the Panama-ChocóBlock collision.We identified that the magnetic fabrics of the extrusive rocks of the Combia Volcanic Province reveal flow directions that indicate the occurrence of ancient volcanoes in the central axis of the AmagáBasin.Some of these fabrics do not contain any deformational features,whereas others record the same structural regime as the Oligocene-middle Miocene sedimentary rocks.We infer that variations in the intensity of the deformation promoted late Miocene local fault reactivations that,in contrast to the Oligocene-middle Miocene deformational events,did not affect the entire AmagáBasin.Age differences among the studied sections can also explain the different deformational patterns identified in the basin.Both interpretations suggest that the most significant collisional events of the Panama-ChocóBlock occurred in the Oligocene-middle Miocene,whereas the formation of the Combia Volcanic Province may have either followed or coincided with the latest stages of the accretion.展开更多
This work evaluates an architecture for decentralized authentication of Internet of Things(IoT)devices in Low Earth Orbit(LEO)satellite networks using IOTA Identity technology.To the best of our knowledge,it is the fi...This work evaluates an architecture for decentralized authentication of Internet of Things(IoT)devices in Low Earth Orbit(LEO)satellite networks using IOTA Identity technology.To the best of our knowledge,it is the first proposal to integrate IOTA’s Directed Acyclic Graph(DAG)-based identity framework into satellite IoT environments,enabling lightweight and distributed authentication under intermittent connectivity.The system leverages Decentralized Identifiers(DIDs)and Verifiable Credentials(VCs)over the Tangle,eliminating the need for mining and sequential blocks.An identity management workflow is implemented that supports the creation,validation,deactivation,and reactivation of IoT devices,and is experimentally validated on the Shimmer Testnet.Three metrics are defined and measured:resolution time,deactivation time,and reactivation time.To improve robustness,an algorithmic optimization is introduced that minimizes communication overhead and reduces latency during deactivation.The experimental results are compared with orbital simulations of satellite revisit times to assess operational feasibility.Unlike blockchain-based approaches,which typically suffer from high confirmation delays and scalability constraints,the proposed DAG architecture provides fast,cost-free operations suitable for resource-constrained IoT devices.The results show that authentication can be efficiently performed within satellite connectivity windows,positioning IOTA Identity as a viable solution for secure and scalable IoT authentication in LEO satellite networks.展开更多
Additive manufacturing(AM)technology has emerged as a viable solution for manufacturing complexshaped WC−Co cemented carbide products,thereby expanding their applications in industries such as resource mining,equipmen...Additive manufacturing(AM)technology has emerged as a viable solution for manufacturing complexshaped WC−Co cemented carbide products,thereby expanding their applications in industries such as resource mining,equipment manufacturing,and electronic information.This review provides a comprehensive summary of the progress of AM technology in WC−Co cemented carbides.The fundamental principles and classification of AM techniques are introduced,followed by a categorization and evaluation of the AM techniques for WC−Co cemented carbides.These techniques are classified as either direct AM technology(DAM)or indirect AM technology(IDAM),depending on their inclusion of post-processes like de-binding and sintering.Through an analysis of microstructure features,the most suitable AM route for WC−Co cemented carbide products with controllable microstructure is identified as the indirect AM technology,such as binder jet printing(BJP),which integrates AM with conventional powder metallurgy.展开更多
Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by g...Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by generating reactive free radicals(RFRs)during photolysis.However,due to the unsatisfactory photoelectric conversion rate,strong absorption by oxygen and water molecules,and other characteristics of VUV radiation,its application and development are hindered,leading to misconceptions regarding high energy consumption and insufficient free radical yield.The objectives of our assessment in this review are as follows:The illumination of the photochemical characteristics of VUV and the reactivity of aqueous solutions.Summarization of accurate UV dose and energy evaluation criteria.Comparison and analysis of the photochemical mechanisms and reaction kinetics of different types of EPs via VUV direct photolysis,as well as the interference origins of typical substrates in water for VUV decontamination.We found that quantities typically reported in VUV photochemical reactions of engineered systems are underreported in low-pressure mercury lamp(LPUV)photochemical reactions,especially a quantitative indicator of the species or energy that induces a chemical reaction.The absence of these quantities has made it difficult to assess the fundamental performance of VUV photolysis fully compared with that of UV-C.Some studies have sought to optimize VUV-advanced reduction processes(VUV-ARP)or VUV reactor treatment of these contaminants;however,an abundant evaluation of the reaction origins and processes between VUV-derived main RFRs and reactants(H_(2)O,O_(2),organic matter,inorganic ions,etc.)is essential,cause these scientific elements will provide the possibility to break the application gap for VUV in the field of EPs treating.Overall,the data compilation,analysis,and research recommendations provided in this review will form the basis for all photochemical reactions initiated by VUV radiation with water as the backing agent.展开更多
High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temp...High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temperature upon shear loading.To better understand the shear fracture behavior and underlying processes of intact granite exposed to thermal-mechanical coupling loading,direct shear tests were conducted utilizing a newly built testing apparatus at varied normal stresses and high temperatures.Influencesof different temperatures and different heating methods(real-time heating and thermal treatment)on the shear mechanical behavior were compared and discussed.Results indicate that shear stress fluctuationswith some small stress drops occur as shear stress is approaching the peak strength under real-time heating,accompanied by more and earlier AE signal uprushes.This suggests that greater cracking events occur earlier during real-time heating than after thermal treatment,resulting in a lower peak shear strength.Furthermore,the peak shear strength,post-peak stress drop,and cohesion rise from room temperature(RT)to 200℃(the peak strength increases by 8%,5.8%,and 9.9%under normal stress of 5 MPa,15 MPa,and 20 MPa,correspondingly),and subsequently decline from 200℃to 400℃.Temperature has a limited impact on shear stiffness from RT to 200℃,but significantlyreduces it from 200℃to 400℃,with drops of 15%,7.9%,and 10%under normal stress of 5 MPa,15 MPa,and 20 MPa,respectively.Moreover,the shear strength and stiffness under real-time heating are lower than those for the thermally treated specimens.The strengthening of intact granite below 200℃upon shear is associated with loss of water and a more compacted structure,while the weakening effect of temperature on shear strength from 200℃to 400℃is due to the new thermal cracks and less brittle and stiff of minerals.展开更多
The establishment of plantations has become a critical approach for reducing greenhouse gas emissions,particularly in fragile environments with carbon sequestration potential.In karst areas,plantations based on fastgr...The establishment of plantations has become a critical approach for reducing greenhouse gas emissions,particularly in fragile environments with carbon sequestration potential.In karst areas,plantations based on fastgrowing afforestation species made significant contributions to enhancing carbon sequestration.However,the impact of understory vegetation on carbon accumulation remains unclear.Especially,the carbon accumulation associated with litter produced during the replacement of understory species receives insufficient attention,which leads to the neglect of the carbon sequestration potential in plantations of karst areas.Leaf is a crucial organ that links the litter production.To explore how leaf traits adapt to competitive environments and drive litter carbon accumulation during understory species replacement,this study observed leaf traits and litter carbon content changes in three types of plantations in the Liujiang River Basin,a typical karst area.A total of 37 sampling plots were selected for field investigation over a twoyear period.Leaf traits,species diversity,vegetation coverage,and litter carbon characteristics in understory vegetation were measured.Variance analysis,allometric equations,and path analysis were used for data analysis.The results showed that most understory species adopted a biomass conservation strategy under high-coverage conditions(>44.27%)and expanded competitive leaf area under low-coverage conditions(<44.27%).However,Bidens pilosa and Miscanthus floridulus exhibited strong competitiveness during understory species replacement.They showed an expansion of competitive leaf area under high-coverage conditions.This competitive strategy reduced species diversity and community specific leaf area.But the rapid expansion of Bidens pilosa and Miscanthus floridulus increased understory vegetation coverage,and their increased specific leaf area facilitated leaf shedding,resulting in significant litter weight accumulation(P<0.05),thereby enhancing litter carbon content per unit area.These competitive strategies were key driving factors for the increase in litter carbon content per square meter,which reached a maximum of 49.6% higher than that in natural grasslands.And the maximum increase in litter carbon accumulation derived from understory vegetation reached 3.37 times from 2023 to 2024 in plantations.In the understory vegetation of plantations,the competitive strategies reflected by leaf adaptation of key competitive species are critical factors influencing litter carbon accumulation.Future research could deeply explore the carbon sequestration effects resulting from the dynamic changes in competition within the understory vegetation of plantations.展开更多
In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbu...In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbulence at various scales,from inertial large-scale motions to small viscous motions.This study analyzes the particle-resolved direct numerical simulation data of particle-laden two-phase flow with multilayers of particles in turbulent flows over static and mobile beds.The double-average method is adopted for energy transfer analysis.The result shows that the alternative streaky bedform in the spanwise directions correlates with the streak structures in the near-wall turbulence in the mobile bed case.The energy redistribution and exchange,as well as the dissipation,are analyzed in detail,and an energy transfer diagram is given in the last to summarize the energy transfer processes.In both the static and mobile bed cases,flow energy is introduced into the system via the work performed by volume forces acting on the mean flow.The viscous dissipations in the double mean and form-induced fields are more pronounced in the static bed case,and the work done by the fluid-particle interfacial stress in the double mean and turbulent fields is more pronounced in the mobile bed case.The prominent energy contribution in the form-induced field is the production by the form-induced stress on the mean strain in the mobile bed case.In addition,sediment transport involving a limited number of mobile particles is insufficient to capture the energy transfer processes that occur over the troughs and may intertwine the energy transfer processes over the mobile particles and the fixed particle bed.展开更多
Exercise produces a decrease in pain sensitivity via an effect called exercise-induced hypoalgesia(EIH).Transcranial direct current stimulation(tDCS),acting on similar analgesic mechanisms as EIH,represents a potentia...Exercise produces a decrease in pain sensitivity via an effect called exercise-induced hypoalgesia(EIH).Transcranial direct current stimulation(tDCS),acting on similar analgesic mechanisms as EIH,represents a potential complementary intervention that may amplify the effects of exercise on pain.This study aimed to explore if anodal tDCS could enhance the effect of exercise on pain compared to exercise alone.A total of 35 healthy participants aged 19–37 years completed a familiarisation session followed by two separate sessions where active and sham tDCS was applied in a randomised cross-over design.The familiarisation session involved familiarisation to the pain assessment and exercise tasks,while the subsequent tDCS sessions involved pain sensitivity assessment,exercise and either anodal tDCS or sham tDCS.tDCS doses were applied at 2 mA over the primary motor cortex for 10 min,with the reference electrode placed over the contralateral supraorbital area.The exercise task involved a sustained isometric grip strength contraction at 35%of maximal voluntary contraction(MVC)until volitional exhaustion.Pain sensitivity was evaluated as pressure pain threshold before tDCS,after tDCS,and after exercise.Across both tDCS conditions,pain threshold was higher after exercise when compared to pre-and post-tDCS measurement.This increase in pain threshold did not differ between active and sham tDCS conditions.Our findings suggest that the hypoalgesic effects of active anodal tDCS over the motor cortex prior to exercise are no greater than the effects of sham tDCS prior to exercise.展开更多
文摘The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.
基金National Key Research and Development Program of China(2024YFB4610803)。
文摘The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.
基金financially supported by the National Natural Science Foundation of China(Nos.22475057 and No.52373262).
文摘Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.
基金supported by Shaanxi Key Research and Development Program(No.2024SF-YBXM-546)the National Natural Science Foundation of China(No.52470161)the State Key Laboratory of Pollution Control and Resource Reuse Foundation(No.PCRRF21007).
文摘With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving mechanism was still unclear.In this study,direct disintegration of biopolymers and indirect broken of connection point were investigated on the hydrolysis and component separation.Three typical sewer sediment treatment approaches,i.e.,alkaline,thermal and cation exchange treatments were proposed,which represented the hydrolysis-driving forces of chemical hydrolysis,physical hydrolysis and innovative cation bridging break-age.The results showed that the organic and inorganic separation rates of sewer sediment driven by alkaline,thermal and cation exchange treatments reached 21.26%,23.80%,and 19.56%-48.0%,respectively,compared to 4.43%in control.The secondary structure of proteins was disrupted,transitioning from𝛼α-helix to𝛽β-turn and random coil.Meanwhile,much biopolymers were released from solid to the liquid phase.From thermody-namic perspective,sewer sediment deposition was controlled by short-range interfacial interactions described by extended Derjaguin-Landau-Verwey-Overbeek theory.Additionally,the separation of organic and inorganic components was positively correlated with the thermodynamic parameters(Corr=0.87),highlighted the robust-ness of various driving forces.And the flocculation energy barriers were 2.40(alkaline),1.60 times(thermal),and 4.02–4.97 times(cation exchange)compared to control group.The findings revealed the contrition differ-ence of direct disintegration of gelatinous biopolymers and indirect breakage of composition connection sites in sediment composition separation,filling the critical gaps in understanding the specific mechanisms of sediment biopolymer disintegration and intermolecular connection breakage.
基金supported in part by the National Key R&D Program of China(No.2024YFA1610700)the National Natural Science Foundation of China(No.12475147)。
文摘The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.
基金supported by the National Science Fund for Distinguished Young Scholars(52425706)。
文摘The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant challenges,including high energy consumption,environmental pollution,and inefficient critical metals recovery.In contrast,advanced direct recycling can selectively extract valuable metals while preserving cathode structure,achieving over 99%lithium recovery from lithium iron phosphate.Moreover,by directly repairing defects and crystal structures of spent materials,their electrochemical performance can be effectively restored.Due to significantly reduced energy and reagent inputs,direct recycling cuts processing costs by over 20% and reduces waste emissions by at least 40% compared to conventional methods,making it a promising low-carbon alternative.This review systematically integrates the recent advances in direct recycling of spent batteries as well as the limitations and challenges of existing technologies,and proposes future research pathways to promote resource recycling and sustainable development.
文摘Objective:To explore the interventional room nursing and its application effects in patients with ischemic stroke treated with tirofiban combined with direct thrombectomy.Methods:A total of 61 patients with ischemic stroke admitted to our hospital from June 2024 to June 2025 were selected and divided into two groups using the red and blue ball method:the control group(n=30,receiving routine interventional room nursing)and the observation group(n=31,receiving additional tirofiban medication-specific nursing+individualized interventional nursing on the basis of routine nursing).The cerebral hemodynamic indicators,adverse reactions,effectiveness of complication nursing,and nursing satisfaction were compared between the two groups.Results:After 7 days of treatment,the observation group had lower cerebrovascular peripheral resistance and higher mean blood flow velocity and mean blood flow volume compared to the control group(all p<0.05).The observation group had a higher effectiveness rate of complication nursing than the control group,with a statistically significant difference(p<0.05).The nursing satisfaction in the observation group(96.77%)was higher than that in the control group(80.00%),with a statistically significant difference(χ^(2)=4.223,p=0.040<0.05).Conclusion:Tirofiban combined with direct thrombectomy can significantly improve cerebral hemodynamics,enhance the effectiveness of complication nursing,and increase patient satisfaction in patients with ischemic stroke.
文摘BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.
基金supported by the National Natural Science Foundation of China(21831001,21571016,91122028)the National Science Fund for Distinguished Young Scholars(20725101)。
文摘A core-shell type Co_(19)-added polyoxometalate H_(17)Na_(4)Cs_(21)[Co_(19)(μ_(3)-OH)_(12)(A-α-SiW_(10)O_(37))_(6)]·8 Cl·12H_(2)O(1)has been made under hydrothermal conditions guided by the lacunary directing synthetic strategy.Single crystal X-ray diffraction(SXRD)has shown that 19 Co^(2+)are arranged in a flat plane through edge sharing in a mode of 3-4-5-4-3,forming a core-shell type polyanion cluster{Co_(19)(SiW_(10))_6}with a diameter of approximately 2.24 nm.Visible-light-driven photocatalytic hydrogen evolution performance studies have shown that 1 is an efficient heterogeneous water reduction catalyst(WRC)with the H_(2)evolution rate of 2902.5μmol h^(-1)g^(-1).Moreover,the cycle tests indicated that 1 was also a good heterogeneous catalyst.
基金financially supported by the National Key Research and Development Program of China(Nos.2024YFB4607402 and 2016YFC1100502)the National Natural Science Foundation of China(Nos.51673208 and 61975213)。
文摘Biopolymeric nanocomposites have attracted considerable attention because of their biocompatibility,biodegradability,and unique physicochemical properties.It is essential to manufacture three-dimensional(3D)biocompatible micro/nanostructures using biopolymeric nanocomposites.Herein,we demonstrate the high-fidelity fabrication of biocompatible 3D features with sub-50 nm resolution using femtosecond laser direct writing(FsLDW)of a biopolymeric nanocomposite composed of egg white and sulfonated graphene(S-graphene).The biopolymer nanocomposite acts as a negative photoresist suitable for water-based lithography.The introduction of S-graphene not only dramatically lowered the laser power threshold but also significantly modulated the morphology of the 3D features constructed by FsLDW.Microstructures with porous,rough,or smooth morphologies were obtained by optimizing the S-graphene concentration and laser scanning speed.The fabricated egg-white/S-graphene microstructures exhibited biocompatibility and environmental degradability.Egg white/S-graphene was also employed to fabricate diffractive gratings with superior optical quality.This study provides a promising method to manufacture biocompatible 3D features with controllable morphology,which has potential applications in biological and photonic fields.
基金supported by the National Nature Science Foundation of China(Grant Nos.12475019 and 12073056)the Major National Science and Technology Project of China(Grant No.BX2024B054)+1 种基金National Lab of Solid State Microstructure of Nanjing University(Grant Nos.M35040,M35053,and M37014)the Natural Science Foundation of Shandong Province(Grant No.ZR2024MA038)。
文摘For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add channels to the non-reciprocal optical device and the non-reciprocity can route optical signals and prevent the reverse flow of noise.Using the Scully–Lamb model and gain saturation effect,we accomplish dual-frequency non-reciprocal transmission by introducing nonlinearity into a linear array of four-mode resonators.The accomplishment is directly demonstrated by the non-reciprocal transmission phenomena present in the non-divergent peaks.For example,a directional cyclic amplifier is constructed with non-reciprocal units.Regarding potential applications,non-reciprocal optical systems can be employed in dual-frequency control,parallel information processing,photonic integrated circuits,optical devices and so on.
基金supported financially by the National Natural Science Foundation of China (Grants W2433104 to V.A.P. and42225402 to J.L.)the China Postdoctoral Science Foundation(Grant 2024M753205 to V.A.P.)+4 种基金the Institute of Geology and Geophysics of the Chinese Academy of Sciences (International Fellowship for Postdoctoral Researchers, Grant 2025PD02 to V.A.P.)an association between ECOS-NORD (France)Colciencias/Icetex (Colombia)(Grant C12U01 to M.I.M.)a junior fellowship scheme of Colciencias (Colombia)(Grant 706-2015 to V.A.P.)supported the undergraduate final project of A.T
文摘The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-middle Miocene deformed rocks of the inter-Andean valley between the Western and Central Cordilleras of Colombia.However,uncertainty remains about the age of the latest accretionary phases of the Panama-ChocóBlock.Poorly studied late Miocene volcanic rocks within the northern inter-Andean valley may provide key information to constrain the temporality of that final collision.Here,we study the deformational features of the~12-6 Ma extrusive rocks of the Combia Volcanic Province located in the northwestern Andes(Colombia).We present anisotropy of magnetic susceptibility(AMS)data for pyroclastic and volcanic rocks within the AmagáBasin,an inter-Andean depression with Oligocene-middle Miocene sedimentary rocks that recorded NW-SE compression and NE-SW simple shear caused by the Panama-ChocóBlock collision.We identified that the magnetic fabrics of the extrusive rocks of the Combia Volcanic Province reveal flow directions that indicate the occurrence of ancient volcanoes in the central axis of the AmagáBasin.Some of these fabrics do not contain any deformational features,whereas others record the same structural regime as the Oligocene-middle Miocene sedimentary rocks.We infer that variations in the intensity of the deformation promoted late Miocene local fault reactivations that,in contrast to the Oligocene-middle Miocene deformational events,did not affect the entire AmagáBasin.Age differences among the studied sections can also explain the different deformational patterns identified in the basin.Both interpretations suggest that the most significant collisional events of the Panama-ChocóBlock occurred in the Oligocene-middle Miocene,whereas the formation of the Combia Volcanic Province may have either followed or coincided with the latest stages of the accretion.
基金This work is part of the‘Intelligent and Cyber-Secure Platform for Adaptive Optimization in the Simultaneous Operation of Heterogeneous Autonomous Robots(PICRAH4.0)’with reference MIG-20232082,funded by MCIN/AEI/10.13039/501100011033supported by the Universidad Internacional de La Rioja(UNIR)through the Precompetitive Research Project entitled“Nuevos Horizontes en Internet de las Cosas y NewSpace(NEWIOT)”,reference PP-2024-13,funded under the 2024 Call for Research Projects.
文摘This work evaluates an architecture for decentralized authentication of Internet of Things(IoT)devices in Low Earth Orbit(LEO)satellite networks using IOTA Identity technology.To the best of our knowledge,it is the first proposal to integrate IOTA’s Directed Acyclic Graph(DAG)-based identity framework into satellite IoT environments,enabling lightweight and distributed authentication under intermittent connectivity.The system leverages Decentralized Identifiers(DIDs)and Verifiable Credentials(VCs)over the Tangle,eliminating the need for mining and sequential blocks.An identity management workflow is implemented that supports the creation,validation,deactivation,and reactivation of IoT devices,and is experimentally validated on the Shimmer Testnet.Three metrics are defined and measured:resolution time,deactivation time,and reactivation time.To improve robustness,an algorithmic optimization is introduced that minimizes communication overhead and reduces latency during deactivation.The experimental results are compared with orbital simulations of satellite revisit times to assess operational feasibility.Unlike blockchain-based approaches,which typically suffer from high confirmation delays and scalability constraints,the proposed DAG architecture provides fast,cost-free operations suitable for resource-constrained IoT devices.The results show that authentication can be efficiently performed within satellite connectivity windows,positioning IOTA Identity as a viable solution for secure and scalable IoT authentication in LEO satellite networks.
基金supported by Major Science and Technology Projects in Fujian Province,China(No.2023HZ021005)State Key Laboratory of Powder Metallurgy,Central South University,ChinaFujian Key Laboratory of Rare-earth Functional Materials,China。
文摘Additive manufacturing(AM)technology has emerged as a viable solution for manufacturing complexshaped WC−Co cemented carbide products,thereby expanding their applications in industries such as resource mining,equipment manufacturing,and electronic information.This review provides a comprehensive summary of the progress of AM technology in WC−Co cemented carbides.The fundamental principles and classification of AM techniques are introduced,followed by a categorization and evaluation of the AM techniques for WC−Co cemented carbides.These techniques are classified as either direct AM technology(DAM)or indirect AM technology(IDAM),depending on their inclusion of post-processes like de-binding and sintering.Through an analysis of microstructure features,the most suitable AM route for WC−Co cemented carbide products with controllable microstructure is identified as the indirect AM technology,such as binder jet printing(BJP),which integrates AM with conventional powder metallurgy.
基金supported by the National Key R&D Program of China(No.2023YFC3210100).
文摘Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by generating reactive free radicals(RFRs)during photolysis.However,due to the unsatisfactory photoelectric conversion rate,strong absorption by oxygen and water molecules,and other characteristics of VUV radiation,its application and development are hindered,leading to misconceptions regarding high energy consumption and insufficient free radical yield.The objectives of our assessment in this review are as follows:The illumination of the photochemical characteristics of VUV and the reactivity of aqueous solutions.Summarization of accurate UV dose and energy evaluation criteria.Comparison and analysis of the photochemical mechanisms and reaction kinetics of different types of EPs via VUV direct photolysis,as well as the interference origins of typical substrates in water for VUV decontamination.We found that quantities typically reported in VUV photochemical reactions of engineered systems are underreported in low-pressure mercury lamp(LPUV)photochemical reactions,especially a quantitative indicator of the species or energy that induces a chemical reaction.The absence of these quantities has made it difficult to assess the fundamental performance of VUV photolysis fully compared with that of UV-C.Some studies have sought to optimize VUV-advanced reduction processes(VUV-ARP)or VUV reactor treatment of these contaminants;however,an abundant evaluation of the reaction origins and processes between VUV-derived main RFRs and reactants(H_(2)O,O_(2),organic matter,inorganic ions,etc.)is essential,cause these scientific elements will provide the possibility to break the application gap for VUV in the field of EPs treating.Overall,the data compilation,analysis,and research recommendations provided in this review will form the basis for all photochemical reactions initiated by VUV radiation with water as the backing agent.
基金support from the Taishan Scholars Program,Key Research Program of Frontier Sciences,Chinese Academy of Sciences(CAS),Grant No.ZDBS-LY-DQC022Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety,Grant No.SKLGME023003.
文摘High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temperature upon shear loading.To better understand the shear fracture behavior and underlying processes of intact granite exposed to thermal-mechanical coupling loading,direct shear tests were conducted utilizing a newly built testing apparatus at varied normal stresses and high temperatures.Influencesof different temperatures and different heating methods(real-time heating and thermal treatment)on the shear mechanical behavior were compared and discussed.Results indicate that shear stress fluctuationswith some small stress drops occur as shear stress is approaching the peak strength under real-time heating,accompanied by more and earlier AE signal uprushes.This suggests that greater cracking events occur earlier during real-time heating than after thermal treatment,resulting in a lower peak shear strength.Furthermore,the peak shear strength,post-peak stress drop,and cohesion rise from room temperature(RT)to 200℃(the peak strength increases by 8%,5.8%,and 9.9%under normal stress of 5 MPa,15 MPa,and 20 MPa,correspondingly),and subsequently decline from 200℃to 400℃.Temperature has a limited impact on shear stiffness from RT to 200℃,but significantlyreduces it from 200℃to 400℃,with drops of 15%,7.9%,and 10%under normal stress of 5 MPa,15 MPa,and 20 MPa,respectively.Moreover,the shear strength and stiffness under real-time heating are lower than those for the thermally treated specimens.The strengthening of intact granite below 200℃upon shear is associated with loss of water and a more compacted structure,while the weakening effect of temperature on shear strength from 200℃to 400℃is due to the new thermal cracks and less brittle and stiff of minerals.
基金supported by the Scientific Research Foundation supported by Yunnan Agricultural University(A3012024035044)International Cooperation and Exchange of the National Natural Science Foundation of China(No.42361144885).
文摘The establishment of plantations has become a critical approach for reducing greenhouse gas emissions,particularly in fragile environments with carbon sequestration potential.In karst areas,plantations based on fastgrowing afforestation species made significant contributions to enhancing carbon sequestration.However,the impact of understory vegetation on carbon accumulation remains unclear.Especially,the carbon accumulation associated with litter produced during the replacement of understory species receives insufficient attention,which leads to the neglect of the carbon sequestration potential in plantations of karst areas.Leaf is a crucial organ that links the litter production.To explore how leaf traits adapt to competitive environments and drive litter carbon accumulation during understory species replacement,this study observed leaf traits and litter carbon content changes in three types of plantations in the Liujiang River Basin,a typical karst area.A total of 37 sampling plots were selected for field investigation over a twoyear period.Leaf traits,species diversity,vegetation coverage,and litter carbon characteristics in understory vegetation were measured.Variance analysis,allometric equations,and path analysis were used for data analysis.The results showed that most understory species adopted a biomass conservation strategy under high-coverage conditions(>44.27%)and expanded competitive leaf area under low-coverage conditions(<44.27%).However,Bidens pilosa and Miscanthus floridulus exhibited strong competitiveness during understory species replacement.They showed an expansion of competitive leaf area under high-coverage conditions.This competitive strategy reduced species diversity and community specific leaf area.But the rapid expansion of Bidens pilosa and Miscanthus floridulus increased understory vegetation coverage,and their increased specific leaf area facilitated leaf shedding,resulting in significant litter weight accumulation(P<0.05),thereby enhancing litter carbon content per unit area.These competitive strategies were key driving factors for the increase in litter carbon content per square meter,which reached a maximum of 49.6% higher than that in natural grasslands.And the maximum increase in litter carbon accumulation derived from understory vegetation reached 3.37 times from 2023 to 2024 in plantations.In the understory vegetation of plantations,the competitive strategies reflected by leaf adaptation of key competitive species are critical factors influencing litter carbon accumulation.Future research could deeply explore the carbon sequestration effects resulting from the dynamic changes in competition within the understory vegetation of plantations.
基金supported by the National Natural Science Foundation of China(Grant Nos.12388101 and 12472221)the Fundamental Research Funds for the Central Universities(Grant No.lzujbky-2024-oy10).
文摘In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbulence at various scales,from inertial large-scale motions to small viscous motions.This study analyzes the particle-resolved direct numerical simulation data of particle-laden two-phase flow with multilayers of particles in turbulent flows over static and mobile beds.The double-average method is adopted for energy transfer analysis.The result shows that the alternative streaky bedform in the spanwise directions correlates with the streak structures in the near-wall turbulence in the mobile bed case.The energy redistribution and exchange,as well as the dissipation,are analyzed in detail,and an energy transfer diagram is given in the last to summarize the energy transfer processes.In both the static and mobile bed cases,flow energy is introduced into the system via the work performed by volume forces acting on the mean flow.The viscous dissipations in the double mean and form-induced fields are more pronounced in the static bed case,and the work done by the fluid-particle interfacial stress in the double mean and turbulent fields is more pronounced in the mobile bed case.The prominent energy contribution in the form-induced field is the production by the form-induced stress on the mean strain in the mobile bed case.In addition,sediment transport involving a limited number of mobile particles is insufficient to capture the energy transfer processes that occur over the troughs and may intertwine the energy transfer processes over the mobile particles and the fixed particle bed.
文摘Exercise produces a decrease in pain sensitivity via an effect called exercise-induced hypoalgesia(EIH).Transcranial direct current stimulation(tDCS),acting on similar analgesic mechanisms as EIH,represents a potential complementary intervention that may amplify the effects of exercise on pain.This study aimed to explore if anodal tDCS could enhance the effect of exercise on pain compared to exercise alone.A total of 35 healthy participants aged 19–37 years completed a familiarisation session followed by two separate sessions where active and sham tDCS was applied in a randomised cross-over design.The familiarisation session involved familiarisation to the pain assessment and exercise tasks,while the subsequent tDCS sessions involved pain sensitivity assessment,exercise and either anodal tDCS or sham tDCS.tDCS doses were applied at 2 mA over the primary motor cortex for 10 min,with the reference electrode placed over the contralateral supraorbital area.The exercise task involved a sustained isometric grip strength contraction at 35%of maximal voluntary contraction(MVC)until volitional exhaustion.Pain sensitivity was evaluated as pressure pain threshold before tDCS,after tDCS,and after exercise.Across both tDCS conditions,pain threshold was higher after exercise when compared to pre-and post-tDCS measurement.This increase in pain threshold did not differ between active and sham tDCS conditions.Our findings suggest that the hypoalgesic effects of active anodal tDCS over the motor cortex prior to exercise are no greater than the effects of sham tDCS prior to exercise.
