In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based po...In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based positioning error sources.The method focused on overcoming the abnormal observations in satellite observation data caused by railway environment rather than the positioning results.Specifically,the relative positioning experimental platform was built and the zero-baseline method was firstly employed to evaluate the carrier phase data quality,and then,GNSS combined observation models were adopted to construct the detection values,which were applied to judge abnormal-data through the dual-frequency observations.Further,ambiguity fixing optimization was investigated based on observation data selection in partly-blocked environments.The results show that the proposed method can effectively detect and address abnormal observations and improve positioning stability.Cycle slips and gross errors can be detected and identified based on dual-frequency global navigation satellite system data.After adopting the data selection strategy,the ambiguity fixing percentage was improved by 29.2%,and the standard deviation in the East,North,and Up components was enhanced by 12.7%,7.4%,and 12.5%,respectively.The proposed method can provide references for train positioning performance optimization in railway environments from the perspective of positioning error sources.展开更多
Since the coal mine in-pit personnel positioning system neither can effectively achieve the function to detect the uniqueness of in-pit coal-mine personnel nor can identify and eliminate violations in attendance manag...Since the coal mine in-pit personnel positioning system neither can effectively achieve the function to detect the uniqueness of in-pit coal-mine personnel nor can identify and eliminate violations in attendance management such as multiple cards for one person, and swiping one's cards by others in China at present. Therefore, the research introduces a uniqueness detection system and method for in-pit coal-mine personnel integrated into the in-pit coal mine personnel positioning system, establishing a system mode based on face recognition + recognition of personnel positioning card + release by automatic detection. Aiming at the facts that the in-pit personnel are wearing helmets and faces are prone to be stained during the face recognition, the study proposes the ideas that pre-process face images using the 2D-wavelet-transformation-based Mallat algorithm and extracts three face features: miner light, eyes and mouths, using the generalized symmetry transformation-based algorithm. This research carried out test with 40 clean face images with no helmets and 40 lightly-stained face images, and then compared with results with the one using the face feature extraction method based on grey-scale transformation and edge detection. The results show that the method described in the paper can detect accurately face features in the above-mentioned two cases, and the accuracy to detect face features is 97.5% in the case of wearing helmets and lightly-stained faces.展开更多
High frequency pulsating voltage injection method is a good candidate for detecting the initial rotor position of permanent magnet synchronous motor.However,traditional methods require a large number of filters,which ...High frequency pulsating voltage injection method is a good candidate for detecting the initial rotor position of permanent magnet synchronous motor.However,traditional methods require a large number of filters,which leads to the deterioration of system stability and dynamic performance.In order to solve these problems,a new signal demodulation method is proposed in this paper.The proposed new method can directly obtain the amplitude of high-frequency current,thus eliminating the use of filters,improving system stability and dynamic performance and saving the work of adjusting filter parameters.In addition,a new magnetic polarity detection method is proposed,which is robust to current measurement noise.Finally,experiments verify the effectiveness of the method.展开更多
With the increasing necessities for reliable printed circuit board(PCB) product, there has been a considerable demand for high speed and high precision vision positioning system. To locate a rectangular lead component...With the increasing necessities for reliable printed circuit board(PCB) product, there has been a considerable demand for high speed and high precision vision positioning system. To locate a rectangular lead component with high accuracy and reliability, a new visual positioning method was introduced. Considering the limitations of Ghosal sub-pixel edge detection algorithm, an improved algorithm was proposed, in which Harris corner features were used to coarsely detect the edge points and Zernike moments were adopted to accurately detect the edge points. Besides, two formulas were developed to determine the edge intersections whose sub-pixel coordinates were calculated with bilinear interpolation and conjugate gradient method. The last experimental results show that the proposed method can detect the deflection and offset, and the detection errors are less than 0.04° and 0.02 pixels.展开更多
Currently, most researches use signals, such as the coil current or voltage of solenoid, to identify parameters; typically, parameter identification method based on variation rate of coil current is applied for positi...Currently, most researches use signals, such as the coil current or voltage of solenoid, to identify parameters; typically, parameter identification method based on variation rate of coil current is applied for position estimation. The problem exists in these researches that the detected signals are prone to interference and difficult to obtain. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which adds a new group of secondary winding to the coil of the ordinary switching electromagnet. On the basis of electromagnetic coupling theory analysis and simulation research of the magnetic field regarding the primary and secondary winding coils, and in accordance with the fact that under PWM control mode varying core position and operating current of windings produce different characteristic of flux increment of the secondary winding. The flux increment of the electromagnet winding can be obtained by conducting time domain integration for the induced voltage signal of the extracted secondary winding, and the core position from the two-dimensional fitting curve of the operating winding current and flux-linkage characteristic quantity of solenoid are calculated. The detecting and testing system of solenoid core position is developed based on the theoretical research. The testing results show that the flux characteristic quantity of switching electromagnet magnetic circuit is able to effectively show the core position and thus to accomplish the non-displacement transducer detection of the said core position of the switching electromagnet. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which provides a new theory and method for switch solenoid to control the proportional valve.展开更多
A kind of self organizing artificial neural network used for weld detection is presented in this paper, and its concepts and issues are discussed. The network can transform the weld visual information into typical pa...A kind of self organizing artificial neural network used for weld detection is presented in this paper, and its concepts and issues are discussed. The network can transform the weld visual information into typical patterns and match with the weld data collected on line, and so realize the accurate detection of the weld position in arc welding process.展开更多
A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright ...A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright spot is pegged on the object to be measured and imaged to the target of CCD camera through a telescopic lens. The CCD target converts the optical signal to equivalent electric signal. The video frequency signal is digitized to an array of 512×512 pixels by the analog to digital converter (ADC), then transmitted to the computer. The computer controls the data acquisition, conducts image processing and detects the location of the target spot. Comparing the current position with the original position of the spot, the displacement of object is obtained. With the aid of analysis software, the system can achieve the resolution of 0 01 mm in the 6 m distance from the object to the point of observation. To meet the need of practice, the measuring distance can be extended to 100 m or even farther.展开更多
The Global Positioning System(GPS)plays an indispensable role in the control of Unmanned Aerial Vehicle(UAV).However,the civilian GPS signals,transmitted over the air without any encryption,are vulnerable to spoofing ...The Global Positioning System(GPS)plays an indispensable role in the control of Unmanned Aerial Vehicle(UAV).However,the civilian GPS signals,transmitted over the air without any encryption,are vulnerable to spoofing attacks,which further guides the UAV on deviated positions or trajectories.To counter the GPS,,m spoofing on UAV system and to detect the position/trajectory anomaly in real time,a motion state vector based stack long short-term memory trajectory prediction scheme is firstly proposed,leveraging the temporal and spatial features of UAV kinematics.Based on the predicted results,an ensemble voting-based trajectory anomaly detection scheme is proposed to detect the position anomalies in real time with the information of motion state sequences.The proposed prediction-based trajectory anomaly detection scheme outperforms the existing offline detection schemes designed for fixed trajectories.Software In The Loop(SITL)based online prediction and online anomaly detection are demonstrated with random 3D flight trajectories.Results show that the coefficient of determination(R^(2))and Root Mean Square Error(RMSE)of the prediction scheme can reach 0.996 and 3.467,respectively.The accuracy,recall,and F1-score of the proposed anomaly detection scheme can reach 0.984,0.988,and 0.983,respectively,which outperform deep ensemble learning,LSTM-based classifier,machine learning classifier and GA-XGBoost based schemes.Moreover,results show that compared with LSTM-based classifier,the average duration(from the moment starting an attack to the moment the attack being detected)and distance of the proposed scheme are reduced by 24.4%and 19.5%,respectively.展开更多
A small and weak target detection method is proposed in this work that outperforms all other methods in terms of real-time capability.It is the first time that two-dimensional(2D)images are processed using only one-di...A small and weak target detection method is proposed in this work that outperforms all other methods in terms of real-time capability.It is the first time that two-dimensional(2D)images are processed using only one-dimensional1D structuring elements in a morphology-based approach,enabling the real-time hardware implementation of the whole image processing method.A parallel image readout and processing structure is introduced to achieve an ultra-low latency time on the order of nanoseconds,and a hyper-frame resolution in the time domain can be achieved by combining the row-by-row structure and the electrical rolling shutter technique.Experimental results suggest that the expected target can be successfully detected under various interferences with an accuracy of 0.1 pixels(1σ)under the worst sky night test condition and that a centroiding precision of better than 0.03 pixels(1σ)can be reached for static tests.The real-time detection method with high robustness and accuracy is attractive for application to all types of real-time small target detection systems,such as medical imaging,infrared surveillance,and target measurement and tracking,where an ultra-high processing speed is required.展开更多
With the help of surgical navigation system,doctors can operate on patients more intuitively and accurately.The positioning accuracy and real-time performance of surgical instruments are very important to the whole sy...With the help of surgical navigation system,doctors can operate on patients more intuitively and accurately.The positioning accuracy and real-time performance of surgical instruments are very important to the whole system.In this paper,we analyze and design the detection algorithm of surgical instrument location mark,and estimate the posture of surgical instrument.In addition,we optimized the pose by remapping.Finally,the algorithm of location mark detection proposed in this paper and the posture analysis data of surgical instruments are verified and analyzed through experiments.The final result shows a high accuracy.展开更多
With the aim of addressing the visual positioning problem of board-to-board(BTB)jacks during the automatic assembly of flexible printed circuit(FPC)in mobile phones,an FPC-BTB jack detection method based on the optimi...With the aim of addressing the visual positioning problem of board-to-board(BTB)jacks during the automatic assembly of flexible printed circuit(FPC)in mobile phones,an FPC-BTB jack detection method based on the optimized You Only Look Once,version 5(YOLOv5)deep learning algorithm was proposed in this study.An FPC-BTB jack real-time detection and positioning system was developed for the real-time target detection and pose output synchronization of the BTB jack.On that basis,a visual positioning experimental platform that integrated a UR5e manipulator arm and Hikvision industrial camera was built for BTB jack detection and positioning experiments.As indicated by the experimental results,the developed FPC-BTB jack detection and positioning system for BTB target recognition and positioning achieved a success rate of 99.677%.Its average detection accuracy reached 99.341%,the average confidence of the detected target was 91%,the detection and positioning speed reached 31.25 frames per second,and the positioning deviation was less than 0.93 mm,which conforms to the practical application requirements of the FPC assembly process.展开更多
Objective: to study the difference and value of immunohistochemical technique and conventional technique in pathological diagnosis of tumor. Methods: 67 cases of tumor patients were treated in our hospital from April ...Objective: to study the difference and value of immunohistochemical technique and conventional technique in pathological diagnosis of tumor. Methods: 67 cases of tumor patients were treated in our hospital from April 2019 to December 2020. The two groups of patients were performed with immunohistochemical technique and routine detection. The immunohistochemical detection was taken as the study group and the routine detection as the control group. The diagnostic effect of the two groups was compared and the value of immunohistochemical technology was analyzed. Results: the detection effect of the study group was significantly better than that of the control group, and the positive detection rate was significantly better than that of the control group, and the detection satisfaction score of the patients in the immunohistochemical technology examination was also significantly higher, the differences were statistically significant (P < 0.05). Conclusion: from the perspective of detection effect, the positive rate of immunohistochemistry is higher, and from the satisfaction of detection patients, patients have higher acceptance of immunohistochemical technology. Therefore, in tumor detection of patients, immunohistochemical technology should be used more.展开更多
基金Project(52272339)supported by the National Natural Science Foundation of ChinaProject(2023YFB390730303)supported by the National Key Research and Development Program of China+2 种基金Project(L2023G004)supported by the Science and Technology Research and Development Program of China State Railway Group Co.,Ltd.Project(QZKFKT2023-005)supported by the State Key Laboratory of Heavy-duty and Express High-power Electric Locomotive,ChinaProject(2022JZZ05)supported by the Open Foundation of MOE Key Laboratory of Engineering Structures of Heavy Haul Railway(Central South University),China。
文摘In this paper,a novel train positioning method considering satellite raw observation data was proposed,which aims to promote train positioning performance from an innovative perspective of the train satellite-based positioning error sources.The method focused on overcoming the abnormal observations in satellite observation data caused by railway environment rather than the positioning results.Specifically,the relative positioning experimental platform was built and the zero-baseline method was firstly employed to evaluate the carrier phase data quality,and then,GNSS combined observation models were adopted to construct the detection values,which were applied to judge abnormal-data through the dual-frequency observations.Further,ambiguity fixing optimization was investigated based on observation data selection in partly-blocked environments.The results show that the proposed method can effectively detect and address abnormal observations and improve positioning stability.Cycle slips and gross errors can be detected and identified based on dual-frequency global navigation satellite system data.After adopting the data selection strategy,the ambiguity fixing percentage was improved by 29.2%,and the standard deviation in the East,North,and Up components was enhanced by 12.7%,7.4%,and 12.5%,respectively.The proposed method can provide references for train positioning performance optimization in railway environments from the perspective of positioning error sources.
基金financial supports from the National Natural Science Foundation of China (No. 51134024)the National High Technology Research and Development Program of China (No. 2012AA062203)are gratefully acknowledged
文摘Since the coal mine in-pit personnel positioning system neither can effectively achieve the function to detect the uniqueness of in-pit coal-mine personnel nor can identify and eliminate violations in attendance management such as multiple cards for one person, and swiping one's cards by others in China at present. Therefore, the research introduces a uniqueness detection system and method for in-pit coal-mine personnel integrated into the in-pit coal mine personnel positioning system, establishing a system mode based on face recognition + recognition of personnel positioning card + release by automatic detection. Aiming at the facts that the in-pit personnel are wearing helmets and faces are prone to be stained during the face recognition, the study proposes the ideas that pre-process face images using the 2D-wavelet-transformation-based Mallat algorithm and extracts three face features: miner light, eyes and mouths, using the generalized symmetry transformation-based algorithm. This research carried out test with 40 clean face images with no helmets and 40 lightly-stained face images, and then compared with results with the one using the face feature extraction method based on grey-scale transformation and edge detection. The results show that the method described in the paper can detect accurately face features in the above-mentioned two cases, and the accuracy to detect face features is 97.5% in the case of wearing helmets and lightly-stained faces.
基金supported by the National Natural Science Foundation of China under Grant 51991384Anhui Provincial Major Science and Technology Project under Grant 202203c08020010。
文摘High frequency pulsating voltage injection method is a good candidate for detecting the initial rotor position of permanent magnet synchronous motor.However,traditional methods require a large number of filters,which leads to the deterioration of system stability and dynamic performance.In order to solve these problems,a new signal demodulation method is proposed in this paper.The proposed new method can directly obtain the amplitude of high-frequency current,thus eliminating the use of filters,improving system stability and dynamic performance and saving the work of adjusting filter parameters.In addition,a new magnetic polarity detection method is proposed,which is robust to current measurement noise.Finally,experiments verify the effectiveness of the method.
基金Project(51175242)supported by the National Natural Science Foundation of ChinaProject(BA2012031)supported by the Jiangsu Province Science and Technology Foundation of China
文摘With the increasing necessities for reliable printed circuit board(PCB) product, there has been a considerable demand for high speed and high precision vision positioning system. To locate a rectangular lead component with high accuracy and reliability, a new visual positioning method was introduced. Considering the limitations of Ghosal sub-pixel edge detection algorithm, an improved algorithm was proposed, in which Harris corner features were used to coarsely detect the edge points and Zernike moments were adopted to accurately detect the edge points. Besides, two formulas were developed to determine the edge intersections whose sub-pixel coordinates were calculated with bilinear interpolation and conjugate gradient method. The last experimental results show that the proposed method can detect the deflection and offset, and the detection errors are less than 0.04° and 0.02 pixels.
基金supported by National Natural Science Foundation of China(Grant No.51175362)
文摘Currently, most researches use signals, such as the coil current or voltage of solenoid, to identify parameters; typically, parameter identification method based on variation rate of coil current is applied for position estimation. The problem exists in these researches that the detected signals are prone to interference and difficult to obtain. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which adds a new group of secondary winding to the coil of the ordinary switching electromagnet. On the basis of electromagnetic coupling theory analysis and simulation research of the magnetic field regarding the primary and secondary winding coils, and in accordance with the fact that under PWM control mode varying core position and operating current of windings produce different characteristic of flux increment of the secondary winding. The flux increment of the electromagnet winding can be obtained by conducting time domain integration for the induced voltage signal of the extracted secondary winding, and the core position from the two-dimensional fitting curve of the operating winding current and flux-linkage characteristic quantity of solenoid are calculated. The detecting and testing system of solenoid core position is developed based on the theoretical research. The testing results show that the flux characteristic quantity of switching electromagnet magnetic circuit is able to effectively show the core position and thus to accomplish the non-displacement transducer detection of the said core position of the switching electromagnet. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which provides a new theory and method for switch solenoid to control the proportional valve.
基金Guangdong Provincial Natural Science Foundation of China
文摘A kind of self organizing artificial neural network used for weld detection is presented in this paper, and its concepts and issues are discussed. The network can transform the weld visual information into typical patterns and match with the weld data collected on line, and so realize the accurate detection of the weld position in arc welding process.
文摘A CCD position detecting system measuring the displacement and deformation of structure is presented. The measure method takes advantage of the position detecting technique based on digital image processing. A bright spot is pegged on the object to be measured and imaged to the target of CCD camera through a telescopic lens. The CCD target converts the optical signal to equivalent electric signal. The video frequency signal is digitized to an array of 512×512 pixels by the analog to digital converter (ADC), then transmitted to the computer. The computer controls the data acquisition, conducts image processing and detects the location of the target spot. Comparing the current position with the original position of the spot, the displacement of object is obtained. With the aid of analysis software, the system can achieve the resolution of 0 01 mm in the 6 m distance from the object to the point of observation. To meet the need of practice, the measuring distance can be extended to 100 m or even farther.
基金supported in part by the National Natural Science Foundation of China(No.62271076)in part by the Fundamental Research Funds for the Central Universities,China(No.2242022k60006).
文摘The Global Positioning System(GPS)plays an indispensable role in the control of Unmanned Aerial Vehicle(UAV).However,the civilian GPS signals,transmitted over the air without any encryption,are vulnerable to spoofing attacks,which further guides the UAV on deviated positions or trajectories.To counter the GPS,,m spoofing on UAV system and to detect the position/trajectory anomaly in real time,a motion state vector based stack long short-term memory trajectory prediction scheme is firstly proposed,leveraging the temporal and spatial features of UAV kinematics.Based on the predicted results,an ensemble voting-based trajectory anomaly detection scheme is proposed to detect the position anomalies in real time with the information of motion state sequences.The proposed prediction-based trajectory anomaly detection scheme outperforms the existing offline detection schemes designed for fixed trajectories.Software In The Loop(SITL)based online prediction and online anomaly detection are demonstrated with random 3D flight trajectories.Results show that the coefficient of determination(R^(2))and Root Mean Square Error(RMSE)of the prediction scheme can reach 0.996 and 3.467,respectively.The accuracy,recall,and F1-score of the proposed anomaly detection scheme can reach 0.984,0.988,and 0.983,respectively,which outperform deep ensemble learning,LSTM-based classifier,machine learning classifier and GA-XGBoost based schemes.Moreover,results show that compared with LSTM-based classifier,the average duration(from the moment starting an attack to the moment the attack being detected)and distance of the proposed scheme are reduced by 24.4%and 19.5%,respectively.
基金support by the China NSF projects(Nos.61505094,61377012 and 51522505).
文摘A small and weak target detection method is proposed in this work that outperforms all other methods in terms of real-time capability.It is the first time that two-dimensional(2D)images are processed using only one-dimensional1D structuring elements in a morphology-based approach,enabling the real-time hardware implementation of the whole image processing method.A parallel image readout and processing structure is introduced to achieve an ultra-low latency time on the order of nanoseconds,and a hyper-frame resolution in the time domain can be achieved by combining the row-by-row structure and the electrical rolling shutter technique.Experimental results suggest that the expected target can be successfully detected under various interferences with an accuracy of 0.1 pixels(1σ)under the worst sky night test condition and that a centroiding precision of better than 0.03 pixels(1σ)can be reached for static tests.The real-time detection method with high robustness and accuracy is attractive for application to all types of real-time small target detection systems,such as medical imaging,infrared surveillance,and target measurement and tracking,where an ultra-high processing speed is required.
基金supported by the Sichuan Science and Technology Program(2021YFQ0003).
文摘With the help of surgical navigation system,doctors can operate on patients more intuitively and accurately.The positioning accuracy and real-time performance of surgical instruments are very important to the whole system.In this paper,we analyze and design the detection algorithm of surgical instrument location mark,and estimate the posture of surgical instrument.In addition,we optimized the pose by remapping.Finally,the algorithm of location mark detection proposed in this paper and the posture analysis data of surgical instruments are verified and analyzed through experiments.The final result shows a high accuracy.
基金supported by the NSFC-Shenzhen Robot Basic Research Center project(U2013204)the National Natural Science Foundation of China(61973196 and 62373225).
文摘With the aim of addressing the visual positioning problem of board-to-board(BTB)jacks during the automatic assembly of flexible printed circuit(FPC)in mobile phones,an FPC-BTB jack detection method based on the optimized You Only Look Once,version 5(YOLOv5)deep learning algorithm was proposed in this study.An FPC-BTB jack real-time detection and positioning system was developed for the real-time target detection and pose output synchronization of the BTB jack.On that basis,a visual positioning experimental platform that integrated a UR5e manipulator arm and Hikvision industrial camera was built for BTB jack detection and positioning experiments.As indicated by the experimental results,the developed FPC-BTB jack detection and positioning system for BTB target recognition and positioning achieved a success rate of 99.677%.Its average detection accuracy reached 99.341%,the average confidence of the detected target was 91%,the detection and positioning speed reached 31.25 frames per second,and the positioning deviation was less than 0.93 mm,which conforms to the practical application requirements of the FPC assembly process.
文摘Objective: to study the difference and value of immunohistochemical technique and conventional technique in pathological diagnosis of tumor. Methods: 67 cases of tumor patients were treated in our hospital from April 2019 to December 2020. The two groups of patients were performed with immunohistochemical technique and routine detection. The immunohistochemical detection was taken as the study group and the routine detection as the control group. The diagnostic effect of the two groups was compared and the value of immunohistochemical technology was analyzed. Results: the detection effect of the study group was significantly better than that of the control group, and the positive detection rate was significantly better than that of the control group, and the detection satisfaction score of the patients in the immunohistochemical technology examination was also significantly higher, the differences were statistically significant (P < 0.05). Conclusion: from the perspective of detection effect, the positive rate of immunohistochemistry is higher, and from the satisfaction of detection patients, patients have higher acceptance of immunohistochemical technology. Therefore, in tumor detection of patients, immunohistochemical technology should be used more.
