[Objectives] To optimize the extraction process of total flavonoids in stems of Mallotus apelta. [Methods]On the basis of singlefactor test,with volume fraction of ethanol,extraction time and ratio of solvent as indep...[Objectives] To optimize the extraction process of total flavonoids in stems of Mallotus apelta. [Methods]On the basis of singlefactor test,with volume fraction of ethanol,extraction time and ratio of solvent as independent variables,the content of total flavonoids as dependent variables,the completely secondary response surface regression fitting was conducted on the independent and dependent variables,and the Response Surface Method was used to optimize the optimum extraction process of total flavonoids in Mallotus apelta stems and predict the optimum process. [Results] The optimum extraction process of total flavonoids in Mallotus apelta was determined as follows: ethanol concentration of 71. 5%; extraction time of 154. 6 min; solid-liquid ratio of 1∶19. 2; total flavonoids content of 7. 060 mg/g; fitted binomial squared correlation coefficient R^2= 0. 8751.[Conclusions]Composite Design/Response Surface Method could be used in the extraction process optimization of total flavonoids in Mallotus apelta stems,the mathematical model established had high prediction accuracy,the method was simple and operability was good.展开更多
The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the rel...The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the relationships among the length,width,height,and spacing of pin fins;the maximum temperature and temperature difference of the battery module;and the pressure drop of the liquid-cooling plate.Model accuracy is verified via variance analysis.The new liquid-cooling plate enables the power battery to work within an optimal temperature range.Appropriately increasing the length,width,and height and reducing the spacing of pin fins could reduce the temperature of the power battery module and improve the temperature uniformity.However,the pressure drop of the liquid-cooling plate increases.The structural parameters of the pin fins are optimized to minimize the maximum temperature and the temperature difference of the battery module as well as the pressure drop of the liquid-cooling plate.The errors between the values predicted and actual by the simulation test are 0.58%,4%,and 0.48%,respectively,which further verifies the model accuracy.The results reveal the influence of the structural parameters of the pin fins inside the liquid-cooling plate on its heat dissipation performance and pressure drop characteristics.A theoretical basis is provided for the design of liquid-cooling plates in power batteries and the optimization of structural parameters.展开更多
BACKGROUND Sorafenib has been the conventional treatment for advanced hepatocellular carcinoma(HCC)since 2008.While radiological complete responses are extremely rare,improved supportive care and multidisciplinary app...BACKGROUND Sorafenib has been the conventional treatment for advanced hepatocellular carcinoma(HCC)since 2008.While radiological complete responses are extremely rare,improved supportive care and multidisciplinary approaches in clinical practice may explain the recent increase in case reports and retrospective series documenting such responses.CASE SUMMARY This case series describes 3 patients with advanced HCC who achieved durable complete responses using first-line sorafenib therapy,even in the presence of portal vein thrombosis or extrahepatic spread,and highlights the potential for sustained remission in selected patients.Dermatologic toxicity and non-viral etiology may correlate with favorable outcomes;however,reliable predictive biomarkers for sorafenib response are lacking.CONCLUSION Future research into the etiology and molecular differences in HCC is necessary to develop more personalized therapy options.展开更多
To achieve the goals of sustainable development of the energy system and the construction of a lowcarbon society,this study proposes a multi-energy storage collaborative optimization strategy for industrial park that ...To achieve the goals of sustainable development of the energy system and the construction of a lowcarbon society,this study proposes a multi-energy storage collaborative optimization strategy for industrial park that integrates the laddered carbon trading mechanism with demand response.Firstly,a dual dimensional DR model is constructed based on the characteristics of load elasticity.The alternativeDRenables flexible substitution of energy loads through complementary conversion of electricity/heat/cold multi-energy sources,while the price DR relies on timeof-use electricity price signals to guide load spatiotemporal migration;Secondly,the LCT mechanism is introduced to achieve optimal carbon emission costs through a tiered carbon quota allocation mechanism.On this basis,an optimization decision model is established with the core objective of maximizing the annual net profit of the park.The objective function takes into account energy sales revenue,generator unit costs,and investment and operation costs of multiple types of energy storage facilities.Themodel constraint system covers three key dimensions:dynamic operation constraints of power generation units,including unit output limits,ramping capability,and minimum start-stop time;the physical boundary of an electric/hot/cold multi-energy storage system involves energy storage capacity and charge/discharge efficiency;The multi-energy network coupling balance equation ensures that the energy conversion and transmission process satisfies the law of conservation of energy.Using CPLEX mathematical programming solver for simulation verification,construct an energy storage capacity configuration decision process that includes LCT-DR synergistic effect.The research results show that compared with the traditional single energy storage configuration mode,this strategy effectively enhances the economic feasibility and engineering practicality of industrial park operation by coordinating demand side resource scheduling and finely controlling carbon costs,while maintaining stable system operation.Its methodological framework provides a technical path that combines theoretical rigor and practical operability for the low-carbon transformation of regional integrated energy systems.展开更多
Foliar uptake of airborne metal(loid)s plays a crucial role in metal(loid)accumulation in plant organs and is influ-enced by the size and emission sources of aerosols.Given the high enrichment of toxic metal(loid)s in...Foliar uptake of airborne metal(loid)s plays a crucial role in metal(loid)accumulation in plant organs and is influ-enced by the size and emission sources of aerosols.Given the high enrichment of toxic metal(loid)s in submicron-scale particulates(PM1),this study established a PM1 exposure system to examine airborne metal(loid)accu-mulation and foliar physiological responses in Oryza sativa L.The results showed that the concentrations of Cu,Zn,As,Pb,and Cd in the leaves and grains were influenced not only by the airborne metal(loid)levels but also by the specific nature of the PM1 particles.The quantitative model for PM1-associated Pb entry into leaf tissue indicated that foliar Pb accumulation was primarily driven by particle adhesion,followed by hydrophilic pene-tration and trans-stomatal liquid film migration,accounting for 87%–89%of the total accumulation.The strong hygroscopicity and high Pb activity of PM1 emitted from waste incineration(WI)increased the Pb absorption coefficient via the hydrophilic and liquid film migration pathway.In contrast,the high hydrophobicity of PM1 from coal burning(CB)led to greater retention of Pb on leaf surfaces.Both foliar reactive oxygen metabolism and photosynthesis indices were sensitive to air pollution.Foliar metal(loid)accumulation and airborne PM1 concentration accounted for the variance in physiological responses in rice leaves.Our results also indicated that Pb was the key element in PM1 emissions from both coal burning(CB)and waste incineration(WI)responsible for significant physiological changes in rice leaves.展开更多
Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immun...Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.展开更多
The seismic design forces of nonstructural components(NSCs)in buildings are closely related to floor acceleration response amplification.To investigate the differences in acceleration responses of structures with diff...The seismic design forces of nonstructural components(NSCs)in buildings are closely related to floor acceleration response amplification.To investigate the differences in acceleration responses of structures with different structural types,fundamental periods,and seismic design levels,56 reinforced concrete and steel structures with fundamental periods ranging from 0.37 s to 5.68 s were selected.For each structure,100 sets of earthquake motions were used as inputs for elastic time history analysis.Based on the resulting 26,500 sets of floor acceleration response data,the amplification rules of peak floor acceleration/peak ground acceleration(PFA/PGA)along the height of various structures and the corresponding floor response spectrum characteristics were studied.The nonlinear changes of PFA/PGA along the height of long period structures were compared with the codes of different countries.Moreover,more suitable prediction equations were proposed based on the structural characteristics.Finally,to solve the issue that existing research still cannot accurately reflect the acceleration amplification coefficient of NSCs with different dynamic characteristics in main structures with different periods,a normalized floor response spectrum is proposed that can simultaneously consider the effects of input ground motion characteristics and the main structure,which can be better used in the seismic design of NSCs.展开更多
Owing to the inherent limitation of the internal pulse ionization chamber within the AlphaGUARD PQ2000 radon monitor,that is,its inability to discriminate the energy levels of α particles,the ingress of^(220)Rn from ...Owing to the inherent limitation of the internal pulse ionization chamber within the AlphaGUARD PQ2000 radon monitor,that is,its inability to discriminate the energy levels of α particles,the ingress of^(220)Rn from the surrounding environment,along with its decay progeny,poses a substantive challenge in accurately determining the^(222)Rn concentration in the measurement outcomes.Among these,the protracted influence primarily stems from the two enduring decay progenies,namely^(212)Pb with a half-life of 10.64 h and^(212)Bi with a half-life of 60.54 min.This study explored the influence of^(220)Rn progeny on the measurement results of an AlphaGUARD PQ2000 radon monitor by developing a theoretical calculation model.The response coefficient related to the residual^(220)Rn progeny within the AlphaGUARD PQ2000 radon monitor was experimentally validated.In addition,this study investigated the effects of temperature and wind speed on the sensitivity of the instrument to^(220)Rn gas.The research findings revealed commendable agreement between the experimentally measured response coefficients of the residual^(220)Rn progeny and the corresponding values derived from the theoretical model.Notably,both the response coefficients of the AlphaGUARD PQ2000 radon monitor to^(220)Rn gas and its internal residual^(220)Rn progeny increased with elevated temperatures and increased wind speeds,providing a reference for correcting the impact of^(220)Rn and its progeny on the measurement results of^(222)Rn concentration obtained using the AlphaGUARD PQ2000 radon monitor.展开更多
The paper designs a novel material-level specimen and its dedicated fixture suitable for applying Combined high-and low-Cycle Fatigue(CCF)loads.Unlike full-scale or simulation specimens,the CCF specimen eliminates geo...The paper designs a novel material-level specimen and its dedicated fixture suitable for applying Combined high-and low-Cycle Fatigue(CCF)loads.Unlike full-scale or simulation specimens,the CCF specimen eliminates geometrically induced stress gradients in the test region.Experimental data on CCF life and strain responses of ZSGH4169 alloy are acquired under different CCF loads.The Maximum Strain within Each(MSE)CCF cycle is demonstrated to be independent of the Low-Cycle Fatigue(LCF)loads and High-Cycle Fatigue(HCF)stress amplitudes,but exhibits a correlation with the Cycle Ratio of HCF/LCF(Rf).The growth law of MSE changes from linear to logarithmic as Rfdecreases.Strain amplitudes in the dwell stage,observed unaffected by Rf,are quantified as a function of LCF nominal stresses and HCF stress amplitudes.However,under a defined CCF load,strain amplitudes in the dwell stage remain constant.Strain peaks in the dwell stage in a single CCF cycle decrease in a power function with increasing HCF cycles.展开更多
Aiming at the uniform features of acceleration response spectra, two scalar periods-the response spectral predominant period Tp and the smoothed spectral predominant period To are employed to normalize the abscissa of...Aiming at the uniform features of acceleration response spectra, two scalar periods-the response spectral predominant period Tp and the smoothed spectral predominant period To are employed to normalize the abscissa of the normalized response spectra （NRS） of ground motions, respectively. Engineering characteristics of 5% -damped NRS, and the bi-normalized response spectra （BNRS） are investigated accounting for the effects of soil condition and fault distance. Nearly 600 horizontal ground motion components during the Chi-Chi earthquake are included in the analysis. It shows that the NRS strongly depends on soil condition and fault distance. However, soil condition and distance have only a slight influence on two kinds of BNRS. Dispersion analysis indicates that such normalization can reduce scatter in the derivation of response spectral shapes. Finally, a parametric analysis of the scalar periods （Tp, To） is performed and then compared with those of previous studies. These special and particular aspects of earthquake response spectra and scalar periods need to be considered in developing earthquake-resistant design criteria.展开更多
In many practical structures, physical parameters of material and applied loads have random property.To optimize this kind of structures,an optimum mathematical model was built.This model has reliability constraints o...In many practical structures, physical parameters of material and applied loads have random property.To optimize this kind of structures,an optimum mathematical model was built.This model has reliability constraints on dynamic stress and displacement and upper & lower limits of the design variables. The numerical characteristic of dynamic response and sensitivity of dynamic response based on probability of structure were deduced respectively. By equivalent disposing, the reliability constraints were changed into conventional forms. The SUMT method was used in the optimization process.Two examples illustrate the correctness and practicability of the optimum model and solving approach.展开更多
Gust response alleviation is very important for helicopters which have strong coupling and vibration. Gust disturbance not only influences the ride quality and the precision of the weapon delivery, but also affects to...Gust response alleviation is very important for helicopters which have strong coupling and vibration. Gust disturbance not only influences the ride quality and the precision of the weapon delivery, but also affects to the structural fatigue load and the strength. The method of an optimal control law to suppress the gust disturbance for helicopters is presented. The optimization requires the minimization of the vertical overload at the pilot′s seat, the attitude variation and the control energy consumption under the gust disturbance. Based on the original control system, the new system can be easily realized by adding a vertical speed feedback passage. In order to develop the real-time operational flight control system, the optimized control law is written in C language. The hybrid simulations prove that the performance of gust response alleviation and the efficiency of digitalization are satisfactory.展开更多
Device robust-design is inherently a multiple-objective optimization problem.Using design of experiments (DoE) combined with response surface methodology (RSM) can satisfy the great incentive to reduce the number of t...Device robust-design is inherently a multiple-objective optimization problem.Using design of experiments (DoE) combined with response surface methodology (RSM) can satisfy the great incentive to reduce the number of technology CAD(TCAD) simulations that need to be performed.However,the errors of RSM models might be large enough to diminish the validity of the results for some nonlinear problems.To find the feasible design space,a new method with objectives-oriented design in generations that takes the errors of RSM model into account is presented.After the augment design of experiments in promising space according to the results of RSM model in current generation,the feasible space will be emerging as the model errors deceasing.The results on FIBMOS examples show that the methodology is efficient.展开更多
Statistical experimental designs were used to optimize the process of phenol degradation by Candida tropicalis Z-04, isolated from phenol-degrading aerobic granules. The most important factors influencing phenol degra...Statistical experimental designs were used to optimize the process of phenol degradation by Candida tropicalis Z-04, isolated from phenol-degrading aerobic granules. The most important factors influencing phenol degradation （p 〈 0.05）, as identified by a two-level Plackett-Burman design with 11 variables, were yeast extract, phenol, inoculum size, and temperature. Steepest ascent method was undertaken to determine the optimal regions of these four significant factors. Central composite design （CCD） and response surface analysis were adopted to further investigate the mutual interactions between these variables and to identify their optimal values that would generate maximum phenol degradation. The analysis results indicated that interactions between yeast extract and temperature, phenol and temperature, inocuhim size and temperature affected the response variable （phenol degradation） significantly. The predicted results showed that the maximum removal efficiency of phenol （99.10%） could be obtained under the optimum conditions of yeast extract 0.41 g/L, phenol 1.03 g/L, inoculum size 1.43% （V/V） and temperature 30.04℃. These predicted values were further verified by validation experiments. The excellent correlation between predicted and experimental values confirmed the validity and practicability of this statistical optimum strategy. This study indicated the excellent ability of C. tropicalis Z-04 in degrading high-strength phenol. Optimal conditions obtained in this experiment laid a solid foundation for further use of this microorganism in the treatment of highstrength phenol effluents.展开更多
The aim of this paper is to investigate and optimize the preparation of scutellarin(SCU)-loaded HP-β-CD/chitosan(CS) nanoparticles(CD/CS-SCU-NPs). CD/CS-SCU-NPs were prepared by ionic cross-linking method and the pro...The aim of this paper is to investigate and optimize the preparation of scutellarin(SCU)-loaded HP-β-CD/chitosan(CS) nanoparticles(CD/CS-SCU-NPs). CD/CS-SCU-NPs were prepared by ionic cross-linking method and the process and formulation variables were optimized using response surface methodology(RSM) with a three-level, three factor Box–Behnken design(BBD).The independent variables were the added amounts of CS, sodium tripolyphosphate(TPP)and Pluronic F-68 during the preparation. Dependent variables(responses) were particle size and entrapment efficiency. Mathematical equations and respond surface plots were used to correlate independent and dependent variables.The preparation process and formulation variables were optimized to achieve minimum particle size and maximum entrapment efficiency by calculating the overall desirability value(OD). The optimized NP formulation was characterized for particle size, PDI, zeta potential, entrapment efficiency and in vitro drug release.According to the results, an optimized CD/CS-SCU-NP formulation was prepared. Results for particle size, PDI, zeta potential and entrapment efficiency were found to be around 200 nm,0.5, 25 mV, and 70% respectively. For in vitro study, the release of SCU from the NPs exhibited a biphasic release and was in accordance with Higuchi equation. The optimized preparation was simple with the probability for industrialization. The combination use of RSM, BBD and overall desirability values could provide a promising application for incorporating CD into CS nanoparticles as drug delivery carrier and help develop lab-scale procedures.展开更多
In order to improve the design results for the reconfigurable frequency response masking FRM filters an improved design method based on second-order cone programming SOCP is proposed.Unlike traditional methods that se...In order to improve the design results for the reconfigurable frequency response masking FRM filters an improved design method based on second-order cone programming SOCP is proposed.Unlike traditional methods that separately design the proposed method takes all the desired designing modes into consideration when designing all the subfilters. First an initial solution is obtained by separately designing the subfilters and then the initial solution is updated by iteratively solving a SOCP problem. The proposed method is evaluated on a design example and simulation results demonstrate that jointly designing all the subfilters can obtain significantly lower minimax approximation errors compared to the conventional design method.展开更多
A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to ...A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.展开更多
This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a l...This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.展开更多
Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in ...Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.展开更多
The optimal design and effectiveness of three control systems,tuned viscous mass damper(TVMD),tuned inerter damper(TID)and tuned mass damper(TMD),on mitigating the seismic responses of base isolated structures,were sy...The optimal design and effectiveness of three control systems,tuned viscous mass damper(TVMD),tuned inerter damper(TID)and tuned mass damper(TMD),on mitigating the seismic responses of base isolated structures,were systematically studied.First,the seismic responses of the base isolated structure with each control system under white noise excitation were obtained.Then,the structural parameter optimizations of the TVMD,TID and TMD were conducted by using three different objectives.The results show that the three control systems were all effective in minimizing the root mean square value of seismic responses,including the base shear of the BIS,the absolute acceleration of structural SDOF,and the relative displacement between the base isolation floor and the foundation.Finally,considering the superstructure as a structural MDOF,a series of time history analyses were performed to investigate the effectiveness and activation sensitivity of the three control systems under far field and near fault seismic excitations.The results show that the effectiveness of TID and TMD with optimized parameters on mitigating the seismic responses of base isolated structures increased as the mass ratio increases,and the effectiveness of TID was always better than TMD with the same mass ratio.The TVMD with a lower mass ratio was more efficient in reducing the seismic response than the TID and TMD.Furthermore,the TVMD,when compared with TMD and TID,had better activation sensitivity and a smaller stroke.展开更多
基金Supported by Chinese Medicine Science and Technology Project of Guangxi Administration of Traditional Chinese Medicine(GZLC14-31)Science and Technology Research and Development Program of Guilin Bureau of Technology(20130403-4)+1 种基金Guangxi"2011 Collaborative Innovation Center"-Zhuang and Yao Medicine Collaborative Innovation Center(Gui201320)the Autonomous Region-Level College Students’ Innovation and Entrepreneurship Training Program(201710601082)
文摘[Objectives] To optimize the extraction process of total flavonoids in stems of Mallotus apelta. [Methods]On the basis of singlefactor test,with volume fraction of ethanol,extraction time and ratio of solvent as independent variables,the content of total flavonoids as dependent variables,the completely secondary response surface regression fitting was conducted on the independent and dependent variables,and the Response Surface Method was used to optimize the optimum extraction process of total flavonoids in Mallotus apelta stems and predict the optimum process. [Results] The optimum extraction process of total flavonoids in Mallotus apelta was determined as follows: ethanol concentration of 71. 5%; extraction time of 154. 6 min; solid-liquid ratio of 1∶19. 2; total flavonoids content of 7. 060 mg/g; fitted binomial squared correlation coefficient R^2= 0. 8751.[Conclusions]Composite Design/Response Surface Method could be used in the extraction process optimization of total flavonoids in Mallotus apelta stems,the mathematical model established had high prediction accuracy,the method was simple and operability was good.
基金supported by the Education and Teaching Research Project of Universities in Fujian Province(FBJY20230167).
文摘The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the relationships among the length,width,height,and spacing of pin fins;the maximum temperature and temperature difference of the battery module;and the pressure drop of the liquid-cooling plate.Model accuracy is verified via variance analysis.The new liquid-cooling plate enables the power battery to work within an optimal temperature range.Appropriately increasing the length,width,and height and reducing the spacing of pin fins could reduce the temperature of the power battery module and improve the temperature uniformity.However,the pressure drop of the liquid-cooling plate increases.The structural parameters of the pin fins are optimized to minimize the maximum temperature and the temperature difference of the battery module as well as the pressure drop of the liquid-cooling plate.The errors between the values predicted and actual by the simulation test are 0.58%,4%,and 0.48%,respectively,which further verifies the model accuracy.The results reveal the influence of the structural parameters of the pin fins inside the liquid-cooling plate on its heat dissipation performance and pressure drop characteristics.A theoretical basis is provided for the design of liquid-cooling plates in power batteries and the optimization of structural parameters.
文摘BACKGROUND Sorafenib has been the conventional treatment for advanced hepatocellular carcinoma(HCC)since 2008.While radiological complete responses are extremely rare,improved supportive care and multidisciplinary approaches in clinical practice may explain the recent increase in case reports and retrospective series documenting such responses.CASE SUMMARY This case series describes 3 patients with advanced HCC who achieved durable complete responses using first-line sorafenib therapy,even in the presence of portal vein thrombosis or extrahepatic spread,and highlights the potential for sustained remission in selected patients.Dermatologic toxicity and non-viral etiology may correlate with favorable outcomes;however,reliable predictive biomarkers for sorafenib response are lacking.CONCLUSION Future research into the etiology and molecular differences in HCC is necessary to develop more personalized therapy options.
基金funded by Science and Technology Projects from State Grid Corporation of China,(Research on Adaptive Balance Optimization and Simulation Technology of Industrial community Energy System with High Proportion of Distributed Energy,No.:5100-202355752A-3-4-SY).
文摘To achieve the goals of sustainable development of the energy system and the construction of a lowcarbon society,this study proposes a multi-energy storage collaborative optimization strategy for industrial park that integrates the laddered carbon trading mechanism with demand response.Firstly,a dual dimensional DR model is constructed based on the characteristics of load elasticity.The alternativeDRenables flexible substitution of energy loads through complementary conversion of electricity/heat/cold multi-energy sources,while the price DR relies on timeof-use electricity price signals to guide load spatiotemporal migration;Secondly,the LCT mechanism is introduced to achieve optimal carbon emission costs through a tiered carbon quota allocation mechanism.On this basis,an optimization decision model is established with the core objective of maximizing the annual net profit of the park.The objective function takes into account energy sales revenue,generator unit costs,and investment and operation costs of multiple types of energy storage facilities.Themodel constraint system covers three key dimensions:dynamic operation constraints of power generation units,including unit output limits,ramping capability,and minimum start-stop time;the physical boundary of an electric/hot/cold multi-energy storage system involves energy storage capacity and charge/discharge efficiency;The multi-energy network coupling balance equation ensures that the energy conversion and transmission process satisfies the law of conservation of energy.Using CPLEX mathematical programming solver for simulation verification,construct an energy storage capacity configuration decision process that includes LCT-DR synergistic effect.The research results show that compared with the traditional single energy storage configuration mode,this strategy effectively enhances the economic feasibility and engineering practicality of industrial park operation by coordinating demand side resource scheduling and finely controlling carbon costs,while maintaining stable system operation.Its methodological framework provides a technical path that combines theoretical rigor and practical operability for the low-carbon transformation of regional integrated energy systems.
基金supported by the National Natural Science Foundation of China(Nos.42077367 and 21677123).
文摘Foliar uptake of airborne metal(loid)s plays a crucial role in metal(loid)accumulation in plant organs and is influ-enced by the size and emission sources of aerosols.Given the high enrichment of toxic metal(loid)s in submicron-scale particulates(PM1),this study established a PM1 exposure system to examine airborne metal(loid)accu-mulation and foliar physiological responses in Oryza sativa L.The results showed that the concentrations of Cu,Zn,As,Pb,and Cd in the leaves and grains were influenced not only by the airborne metal(loid)levels but also by the specific nature of the PM1 particles.The quantitative model for PM1-associated Pb entry into leaf tissue indicated that foliar Pb accumulation was primarily driven by particle adhesion,followed by hydrophilic pene-tration and trans-stomatal liquid film migration,accounting for 87%–89%of the total accumulation.The strong hygroscopicity and high Pb activity of PM1 emitted from waste incineration(WI)increased the Pb absorption coefficient via the hydrophilic and liquid film migration pathway.In contrast,the high hydrophobicity of PM1 from coal burning(CB)led to greater retention of Pb on leaf surfaces.Both foliar reactive oxygen metabolism and photosynthesis indices were sensitive to air pollution.Foliar metal(loid)accumulation and airborne PM1 concentration accounted for the variance in physiological responses in rice leaves.Our results also indicated that Pb was the key element in PM1 emissions from both coal burning(CB)and waste incineration(WI)responsible for significant physiological changes in rice leaves.
基金supported by the National Natural Science Foundation of China(Nos.82573045,82460602,82560459)the Hainan Provincial Graduate Student Innovative Research Project(No.Qhys2024-440).
文摘Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.
基金Natural Science Foundation of China under Grant Nos.52078471,52078472 and 52208509National Key Research and Development Plan of China under Grant No.2019YFE0112700+2 种基金Natural Science Foundation of Heilongjiang Province under Grant No.LH2022E121Special Project for Basic Scientific Research Business Expenses of the Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2022C04Director’s Fund Director’s Fund of Earthquake Agency of Inner Mongolia Autonomous Region under Grant No.2023MS10。
文摘The seismic design forces of nonstructural components(NSCs)in buildings are closely related to floor acceleration response amplification.To investigate the differences in acceleration responses of structures with different structural types,fundamental periods,and seismic design levels,56 reinforced concrete and steel structures with fundamental periods ranging from 0.37 s to 5.68 s were selected.For each structure,100 sets of earthquake motions were used as inputs for elastic time history analysis.Based on the resulting 26,500 sets of floor acceleration response data,the amplification rules of peak floor acceleration/peak ground acceleration(PFA/PGA)along the height of various structures and the corresponding floor response spectrum characteristics were studied.The nonlinear changes of PFA/PGA along the height of long period structures were compared with the codes of different countries.Moreover,more suitable prediction equations were proposed based on the structural characteristics.Finally,to solve the issue that existing research still cannot accurately reflect the acceleration amplification coefficient of NSCs with different dynamic characteristics in main structures with different periods,a normalized floor response spectrum is proposed that can simultaneously consider the effects of input ground motion characteristics and the main structure,which can be better used in the seismic design of NSCs.
基金supported by the National Natural Science Foundation of China(No.12175102)Hunan Provincial Natural Science Foundation(No.2022JJ40346)the 2022 Hunan Provincial University Student Innovation and Entrepreneurship Training Program(No.S202210555144).
文摘Owing to the inherent limitation of the internal pulse ionization chamber within the AlphaGUARD PQ2000 radon monitor,that is,its inability to discriminate the energy levels of α particles,the ingress of^(220)Rn from the surrounding environment,along with its decay progeny,poses a substantive challenge in accurately determining the^(222)Rn concentration in the measurement outcomes.Among these,the protracted influence primarily stems from the two enduring decay progenies,namely^(212)Pb with a half-life of 10.64 h and^(212)Bi with a half-life of 60.54 min.This study explored the influence of^(220)Rn progeny on the measurement results of an AlphaGUARD PQ2000 radon monitor by developing a theoretical calculation model.The response coefficient related to the residual^(220)Rn progeny within the AlphaGUARD PQ2000 radon monitor was experimentally validated.In addition,this study investigated the effects of temperature and wind speed on the sensitivity of the instrument to^(220)Rn gas.The research findings revealed commendable agreement between the experimentally measured response coefficients of the residual^(220)Rn progeny and the corresponding values derived from the theoretical model.Notably,both the response coefficients of the AlphaGUARD PQ2000 radon monitor to^(220)Rn gas and its internal residual^(220)Rn progeny increased with elevated temperatures and increased wind speeds,providing a reference for correcting the impact of^(220)Rn and its progeny on the measurement results of^(222)Rn concentration obtained using the AlphaGUARD PQ2000 radon monitor.
基金co-supported by the National Natural Science Foundation of China(51805017)National Science and Technology Project(J2017-IV-0012-0049)+1 种基金National Science and Technology Project,China(J2019-IV-0007-0075)the Fundamental Research Funds for the Central Universities,China(JKF-20240036).
文摘The paper designs a novel material-level specimen and its dedicated fixture suitable for applying Combined high-and low-Cycle Fatigue(CCF)loads.Unlike full-scale or simulation specimens,the CCF specimen eliminates geometrically induced stress gradients in the test region.Experimental data on CCF life and strain responses of ZSGH4169 alloy are acquired under different CCF loads.The Maximum Strain within Each(MSE)CCF cycle is demonstrated to be independent of the Low-Cycle Fatigue(LCF)loads and High-Cycle Fatigue(HCF)stress amplitudes,but exhibits a correlation with the Cycle Ratio of HCF/LCF(Rf).The growth law of MSE changes from linear to logarithmic as Rfdecreases.Strain amplitudes in the dwell stage,observed unaffected by Rf,are quantified as a function of LCF nominal stresses and HCF stress amplitudes.However,under a defined CCF load,strain amplitudes in the dwell stage remain constant.Strain peaks in the dwell stage in a single CCF cycle decrease in a power function with increasing HCF cycles.
基金China Postdoctoral Science Foundation ( No20060400826)
文摘Aiming at the uniform features of acceleration response spectra, two scalar periods-the response spectral predominant period Tp and the smoothed spectral predominant period To are employed to normalize the abscissa of the normalized response spectra （NRS） of ground motions, respectively. Engineering characteristics of 5% -damped NRS, and the bi-normalized response spectra （BNRS） are investigated accounting for the effects of soil condition and fault distance. Nearly 600 horizontal ground motion components during the Chi-Chi earthquake are included in the analysis. It shows that the NRS strongly depends on soil condition and fault distance. However, soil condition and distance have only a slight influence on two kinds of BNRS. Dispersion analysis indicates that such normalization can reduce scatter in the derivation of response spectral shapes. Finally, a parametric analysis of the scalar periods （Tp, To） is performed and then compared with those of previous studies. These special and particular aspects of earthquake response spectra and scalar periods need to be considered in developing earthquake-resistant design criteria.
文摘In many practical structures, physical parameters of material and applied loads have random property.To optimize this kind of structures,an optimum mathematical model was built.This model has reliability constraints on dynamic stress and displacement and upper & lower limits of the design variables. The numerical characteristic of dynamic response and sensitivity of dynamic response based on probability of structure were deduced respectively. By equivalent disposing, the reliability constraints were changed into conventional forms. The SUMT method was used in the optimization process.Two examples illustrate the correctness and practicability of the optimum model and solving approach.
文摘Gust response alleviation is very important for helicopters which have strong coupling and vibration. Gust disturbance not only influences the ride quality and the precision of the weapon delivery, but also affects to the structural fatigue load and the strength. The method of an optimal control law to suppress the gust disturbance for helicopters is presented. The optimization requires the minimization of the vertical overload at the pilot′s seat, the attitude variation and the control energy consumption under the gust disturbance. Based on the original control system, the new system can be easily realized by adding a vertical speed feedback passage. In order to develop the real-time operational flight control system, the optimized control law is written in C language. The hybrid simulations prove that the performance of gust response alleviation and the efficiency of digitalization are satisfactory.
文摘Device robust-design is inherently a multiple-objective optimization problem.Using design of experiments (DoE) combined with response surface methodology (RSM) can satisfy the great incentive to reduce the number of technology CAD(TCAD) simulations that need to be performed.However,the errors of RSM models might be large enough to diminish the validity of the results for some nonlinear problems.To find the feasible design space,a new method with objectives-oriented design in generations that takes the errors of RSM model into account is presented.After the augment design of experiments in promising space according to the results of RSM model in current generation,the feasible space will be emerging as the model errors deceasing.The results on FIBMOS examples show that the methodology is efficient.
基金supported by the National Natural Science Foundation of China (No.50778110)
文摘Statistical experimental designs were used to optimize the process of phenol degradation by Candida tropicalis Z-04, isolated from phenol-degrading aerobic granules. The most important factors influencing phenol degradation （p 〈 0.05）, as identified by a two-level Plackett-Burman design with 11 variables, were yeast extract, phenol, inoculum size, and temperature. Steepest ascent method was undertaken to determine the optimal regions of these four significant factors. Central composite design （CCD） and response surface analysis were adopted to further investigate the mutual interactions between these variables and to identify their optimal values that would generate maximum phenol degradation. The analysis results indicated that interactions between yeast extract and temperature, phenol and temperature, inocuhim size and temperature affected the response variable （phenol degradation） significantly. The predicted results showed that the maximum removal efficiency of phenol （99.10%） could be obtained under the optimum conditions of yeast extract 0.41 g/L, phenol 1.03 g/L, inoculum size 1.43% （V/V） and temperature 30.04℃. These predicted values were further verified by validation experiments. The excellent correlation between predicted and experimental values confirmed the validity and practicability of this statistical optimum strategy. This study indicated the excellent ability of C. tropicalis Z-04 in degrading high-strength phenol. Optimal conditions obtained in this experiment laid a solid foundation for further use of this microorganism in the treatment of highstrength phenol effluents.
基金supported by the Academic Research Fund,Faculty of Science,National University of Singapore,R148-000-180-112
文摘The aim of this paper is to investigate and optimize the preparation of scutellarin(SCU)-loaded HP-β-CD/chitosan(CS) nanoparticles(CD/CS-SCU-NPs). CD/CS-SCU-NPs were prepared by ionic cross-linking method and the process and formulation variables were optimized using response surface methodology(RSM) with a three-level, three factor Box–Behnken design(BBD).The independent variables were the added amounts of CS, sodium tripolyphosphate(TPP)and Pluronic F-68 during the preparation. Dependent variables(responses) were particle size and entrapment efficiency. Mathematical equations and respond surface plots were used to correlate independent and dependent variables.The preparation process and formulation variables were optimized to achieve minimum particle size and maximum entrapment efficiency by calculating the overall desirability value(OD). The optimized NP formulation was characterized for particle size, PDI, zeta potential, entrapment efficiency and in vitro drug release.According to the results, an optimized CD/CS-SCU-NP formulation was prepared. Results for particle size, PDI, zeta potential and entrapment efficiency were found to be around 200 nm,0.5, 25 mV, and 70% respectively. For in vitro study, the release of SCU from the NPs exhibited a biphasic release and was in accordance with Higuchi equation. The optimized preparation was simple with the probability for industrialization. The combination use of RSM, BBD and overall desirability values could provide a promising application for incorporating CD into CS nanoparticles as drug delivery carrier and help develop lab-scale procedures.
基金The National Natural Science Foundation of China(No.61231002,61273266,61375028)the Ph.D.Programs Foundation of Ministry of Education of China(No.20110092130004)
文摘In order to improve the design results for the reconfigurable frequency response masking FRM filters an improved design method based on second-order cone programming SOCP is proposed.Unlike traditional methods that separately design the proposed method takes all the desired designing modes into consideration when designing all the subfilters. First an initial solution is obtained by separately designing the subfilters and then the initial solution is updated by iteratively solving a SOCP problem. The proposed method is evaluated on a design example and simulation results demonstrate that jointly designing all the subfilters can obtain significantly lower minimax approximation errors compared to the conventional design method.
基金Projects(51275235, 50975135) supported by the National Natural Science Foundation of ChinaProject(U0934004) supported by the Natural Science Foundation of Guangdong Province, ChinaProject(2011CB707602) supported by the National Basic Research Program of China
文摘A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.
基金supported by the National Iranian Copper Industry Co.
文摘This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.
基金supported by the National Key Research and Development Program of China (No. 2016YFB0200700)the National Nature Science Foundation of China (No. 11872089, No. 11572024, No. 11432002)Defence Industrial Technology Development Programs of China (No. JCKY2016601B001, No. JCKY2016204B101, No. JCKY2017601B001) for the financial supports
文摘Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.
基金National Key Research and Development Program of China under Grant No.2017YFC0703600 and No.2017YFC0703604。
文摘The optimal design and effectiveness of three control systems,tuned viscous mass damper(TVMD),tuned inerter damper(TID)and tuned mass damper(TMD),on mitigating the seismic responses of base isolated structures,were systematically studied.First,the seismic responses of the base isolated structure with each control system under white noise excitation were obtained.Then,the structural parameter optimizations of the TVMD,TID and TMD were conducted by using three different objectives.The results show that the three control systems were all effective in minimizing the root mean square value of seismic responses,including the base shear of the BIS,the absolute acceleration of structural SDOF,and the relative displacement between the base isolation floor and the foundation.Finally,considering the superstructure as a structural MDOF,a series of time history analyses were performed to investigate the effectiveness and activation sensitivity of the three control systems under far field and near fault seismic excitations.The results show that the effectiveness of TID and TMD with optimized parameters on mitigating the seismic responses of base isolated structures increased as the mass ratio increases,and the effectiveness of TID was always better than TMD with the same mass ratio.The TVMD with a lower mass ratio was more efficient in reducing the seismic response than the TID and TMD.Furthermore,the TVMD,when compared with TMD and TID,had better activation sensitivity and a smaller stroke.
