The concept and development history of rehabilitation environment were summarized in this study,principles and techniques of applying evidence-based design in the design of rehabilitation environment were analyzed,cla...The concept and development history of rehabilitation environment were summarized in this study,principles and techniques of applying evidence-based design in the design of rehabilitation environment were analyzed,classification and functions of landscape elements in rehabilitation environment were particularly discussed.展开更多
Urban children's recreational landscape space is an organic component of urban children's recreational space,genius loci is both a result and a motive in its design.This paper interpreted the connotations of g...Urban children's recreational landscape space is an organic component of urban children's recreational space,genius loci is both a result and a motive in its design.This paper interpreted the connotations of genius loci of urban children's recreational space,the correlation between both,and design elements of urban children's recreational landscape space,in order to provide theoretical support for the design of urban children's recreational landscape space.展开更多
The vacuum plume effects experimental system （PES） is the first experimental system designed to study the effects of vacuum plume in China. The main equipment, a vacuum chamber of 5.5 m in diameter and 12.8 m in len...The vacuum plume effects experimental system （PES） is the first experimental system designed to study the effects of vacuum plume in China. The main equipment, a vacuum chamber of 5.5 m in diameter and 12.8 m in length, and structure design of hinged door are described. The finite element method （FEM） is adopted to analyze the static strength and stability of the PES vacuum chamber. It is demonstrated that the static strength and stability are qualified. For the 5.5 m diameter vacuum chamber door, three design schemes are put forward. After comparisons are made, the single-axis-double-pin hinged door is selected. The FEM is applied to checking its static strength as well as distortions. The results show that the door’s distortion and displacement change mainly due to the gravity of the door which leads to its sinking. The calculated displacement is less than 7.8 mm, while the actual measurement is 5 mm. The single-axis-double-pin hinged door mechanism completely satisfies the design requirements. This innovative structure can be introduced as a reference for the design of large-scale hinged doors.展开更多
This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design metho...This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design method. Comparison of the design provisions of the GB 50011-2010 code and those of the American code ACI 318-14 indicates a possible deficiency in the T-shaped wall design provisions in GB 50011-2010. A case study of a typical T-shaped wall designed in accordance with GB 50011-2010 also indicates the insufficient extent of the boundary element at the non-flange end and overly conservative design of the flange end boundary element. Improved designs for special boundary elements ofT-shaped walls are developed using a displacement-based method. The proposed design formulas produce a longer boundary element at the non-flange end and a shorter boundary element at the flange end, relative to those of the GB 50011-2010 provisions. Extensive numerical analysis indicates that T-shaped walls designed using the proposed formulas develop inelastic drift of 0.01 for both cases of the flange in compression and in tension.展开更多
This paper firstly defined the concept of folk culture block,and then analyzed the significance and planning principle of landscape design in folk culture block,and at last expounded landscape planning and design of f...This paper firstly defined the concept of folk culture block,and then analyzed the significance and planning principle of landscape design in folk culture block,and at last expounded landscape planning and design of folk culture block based on theory of three elements of landscape.展开更多
From the perspectives of hotel road profile,orientation of plant color combination,interpretation of Cultural eco-elements,and landscape design of Embrace Sea Villas Hotel was taken for example to explore the ways of ...From the perspectives of hotel road profile,orientation of plant color combination,interpretation of Cultural eco-elements,and landscape design of Embrace Sea Villas Hotel was taken for example to explore the ways of demonstrating regional cultural characteristics in hotel landscape designs on Hainan Island. Eco-design techniques of tropical landscapes were combined to facilitate the formation of harmonious holiday resort images on the island,and enhance the public acceptance of the characteristic vacation culture of Hainan.展开更多
Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/N...Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/NASTRAN as an important module of software to deal with large and complicated structures and systems with an example to demonstrate the prototype system.展开更多
Structural safety against collapse will be ensured on the condition that stresses and strains in each element of concrete and reinforcement do not exceed the set limits. Different from the general design method, the r...Structural safety against collapse will be ensured on the condition that stresses and strains in each element of concrete and reinforcement do not exceed the set limits. Different from the general design method, the required amounts of longitudinal and stirrup reinforcements in reinforced concrete beam under certain loads by the finite element design method are interactive. There is an approximate hyperbolic relation between them. Considering economy and the design principle that beam should be stronger for shear and weaker for bending, even the yield point of longitudinal reinforcement is taken as reference point for design. According to this point, a real-life beam is designed and the design steps of the finite element method are discussed.展开更多
Designing airfoils according to given pressure (or velocity) distribution is one kind of free boundary problems. Free boundary condition can be coupled with the flow governing equations by variable-domain variational ...Designing airfoils according to given pressure (or velocity) distribution is one kind of free boundary problems. Free boundary condition can be coupled with the flow governing equations by variable-domain variational calculus, which makes it possible to calculate simultaneously the flow field and the free boundary. An accurate deduction of the variable-domain variational principles is taken herein to design airfoils in compressible and incompressible flows. Furthermore, two grid types (H and O) are used in the calculation with better results for the O-type grid. It is shown that convergence is accelerated and good results can be obtained even if the initial guessed airfoil shape is a triangle, demonstrating the strong adaptability of this method.展开更多
Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the e...Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the explicit code LS-DYNA. The manufacturing process for the instrument panel frame consists of tube pre-be nding and final hydroforming. To accomplish hydroforming process design successf ully, a thorough investigation of proper combination of process parameters such as internal hydraulic pressure and axial feeding is carried out by finite element simulation to predict the tube wall thickness and shape. An optimized process parameter combination is obtained and verified by the instrument panel frame hyd roforming experiment. The experiment shows that designed process parameters can be used in real production through FEA simulation, but tubular thinned amplitu de by FEA is less than that with the experiment.展开更多
The efficiency and precision of parameter calibration in discrete element method （DEM） are not satisfactory, and parameter calibration for granular heat transfer is rarely involved. Accordingly, parameter calibratio...The efficiency and precision of parameter calibration in discrete element method （DEM） are not satisfactory, and parameter calibration for granular heat transfer is rarely involved. Accordingly, parameter calibration for granular heat transfer with the DEM is studied. The heat transfer in granular assemblies is simulated with DEM, and the effective thermal conductivity （ETC） of these granular assemblies is measured with the transient method in simulations. The measurement testbed is designed to test the ETC of the granular assemblies under normal pressure and a vacuum based on the steady method. Central composite design （CCD） is used to simulate the impact of the DEM parameters on the ETC of granular assemblies, and the heat transfer parameters are calibrated and compared with experimental data. The results show that, within the scope of the considered parameters, the ETC of the granular assemblies increases with an increasing particle thermal conductivity and decreases with an increasing particle shear modulus and particle diameter. The particle thermal conductivity has the greatest impact on the ETC of granular assemblies followed by the particle shear modulus and then the particle diameter. The calibration results show good agreement with the experimental results. The error is less than 4%, which is within a reasonable range for the scope of the CCD parameters. The proposed research provides high efficiency and high accuracy parameter calibration for granular heat transfer in DEM.展开更多
A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive re...A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive relationships and strength criteria of concrete and steel bars are included, and the progressive cracking and crushing of the concrete are taken into account. Based on the stress distribution obtained by the nonlinear finite element analysis, the amount of reinforcement in the control sections can be computed and adjusted automatically by the program to satisfy the requirement of the design. The amount of reinforcement required in the control sections, which are obtained with the nonlinear finite element analysis, is agreeable to that obtained in the experiment. This shows that the design method of R. C. offshore platform with the nonlinear finite element method proposed by the authors is reliable for practical use.展开更多
In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based d...In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based design process optimization and reuse is put forward and analyzed. Second, the extensible basic-element model of the design process gene is established based on the models of the design process base and the base pair through analyzing the concept and structure of the design process gene and the extensible basic-element as well as its extensibility. Third, the features of divergence and scalability of the extensible basic-element model of the design process gene are discussed for carrying out the extension translation to the design process gene by way of inserting, deleting and updating design process bases. Finally, an example of building extensible basic-element models for the design process base, base pair and design process gene in mechanical product design and the mutation process of the design process gene in airplane design is presented which demonstrates the application of the method proposed in this paper.展开更多
This paper describes the structure of the molds for making polycrystalline diamond compact （PDC） drilling bits. It represents the mold shapes by using the Finite Element technique, and compares the analytical result...This paper describes the structure of the molds for making polycrystalline diamond compact （PDC） drilling bits. It represents the mold shapes by using the Finite Element technique, and compares the analytical results with available experimental data. Based on the results of Finite Element analysis, some areas of stress concentrations are determined, and modifications made, to the PDC （polycrystalline diamond compact） mold. A displacement plot and several stress contour plots are presented. Techniques of the mold design are discussed.展开更多
ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finit...ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finite element method. First, a finite element model is established and the static and dynamic analysis are completed as constraints and loads applied on the finite element model. It is found that both spindle box and gantry are the worst components of assembly in performance. Secondly, the spindle box and gantry are chosen as objects of optimal design separately, aiming to improve their performance. The optimal plans are accomplished on the basis of the minimum volume for the spindle box and the maximum inherent frequency for the gantry subject to the constrains. Finally, the machine tool improved is analyzed statically and dynamically based on the optimal results of the spindle box and gantry. The results show that optimal design with the finite element method increases static and dynamical performances of the XH2408 gantry style numerical control milling machining center and the technique is effective and practical in engineering applications.展开更多
This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pilla...This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pillar size needed for entry protection, and(3) safety of bleeder entries during the advance of an adjacent longwall panel.While the finite element method is by far the most popular engineering design tool of the digital age, widespread use by the mining community has been impeded by the relatively high cost of and the need for lengthy specialized training in numerical methods.Implementation of UT3PC overcomes these impediments in three easy steps.First, a material properties file is prepared for the considered site.Next, mesh generation is automatic through an interactive process.A third and last step is simply execution of the program.Examples using data from several western coal mines illustrate the ease of using the application for analysis of main entries, barrier pillars, and bleeder entry safety.展开更多
The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential u...The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential unconstrained minimization technique, the stress distribution on c rush tooth and it's optimal shape are aquired. After analyzing the results, the relation between stress distribution and structural parameters is presented.展开更多
基金Supported by SRT Program of Nanjing Agricultural University (2009)~~
文摘The concept and development history of rehabilitation environment were summarized in this study,principles and techniques of applying evidence-based design in the design of rehabilitation environment were analyzed,classification and functions of landscape elements in rehabilitation environment were particularly discussed.
基金Sponsored by Jiangxi Provincial Postgraduate Innovation Foundation(YC2015-S133)Jiangxi Provincial Arts and Social Science Program(YG 2015033)
文摘Urban children's recreational landscape space is an organic component of urban children's recreational space,genius loci is both a result and a motive in its design.This paper interpreted the connotations of genius loci of urban children's recreational space,the correlation between both,and design elements of urban children's recreational landscape space,in order to provide theoretical support for the design of urban children's recreational landscape space.
文摘The vacuum plume effects experimental system （PES） is the first experimental system designed to study the effects of vacuum plume in China. The main equipment, a vacuum chamber of 5.5 m in diameter and 12.8 m in length, and structure design of hinged door are described. The finite element method （FEM） is adopted to analyze the static strength and stability of the PES vacuum chamber. It is demonstrated that the static strength and stability are qualified. For the 5.5 m diameter vacuum chamber door, three design schemes are put forward. After comparisons are made, the single-axis-double-pin hinged door is selected. The FEM is applied to checking its static strength as well as distortions. The results show that the door’s distortion and displacement change mainly due to the gravity of the door which leads to its sinking. The calculated displacement is less than 7.8 mm, while the actual measurement is 5 mm. The single-axis-double-pin hinged door mechanism completely satisfies the design requirements. This innovative structure can be introduced as a reference for the design of large-scale hinged doors.
基金International Science&Technology Cooperation Program of China under Grant No.2014DFA70950Tsinghua University Initiative Scientific Research Program under Grant No.2012THZ02-1National Natural Science Foundation of China under Grant No.91315301
文摘This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design method. Comparison of the design provisions of the GB 50011-2010 code and those of the American code ACI 318-14 indicates a possible deficiency in the T-shaped wall design provisions in GB 50011-2010. A case study of a typical T-shaped wall designed in accordance with GB 50011-2010 also indicates the insufficient extent of the boundary element at the non-flange end and overly conservative design of the flange end boundary element. Improved designs for special boundary elements ofT-shaped walls are developed using a displacement-based method. The proposed design formulas produce a longer boundary element at the non-flange end and a shorter boundary element at the flange end, relative to those of the GB 50011-2010 provisions. Extensive numerical analysis indicates that T-shaped walls designed using the proposed formulas develop inelastic drift of 0.01 for both cases of the flange in compression and in tension.
文摘This paper firstly defined the concept of folk culture block,and then analyzed the significance and planning principle of landscape design in folk culture block,and at last expounded landscape planning and design of folk culture block based on theory of three elements of landscape.
基金Sponsored by Hainan Innovation Scientific Research Program of Graduates(hys2011-23)
文摘From the perspectives of hotel road profile,orientation of plant color combination,interpretation of Cultural eco-elements,and landscape design of Embrace Sea Villas Hotel was taken for example to explore the ways of demonstrating regional cultural characteristics in hotel landscape designs on Hainan Island. Eco-design techniques of tropical landscapes were combined to facilitate the formation of harmonious holiday resort images on the island,and enhance the public acceptance of the characteristic vacation culture of Hainan.
文摘Presents the design scheme developed for design of software for Integrated Passive and Active Vibration Control(IPAVC) and the coding of a prototyne system, and the selection of the famous finite element program MSC/NASTRAN as an important module of software to deal with large and complicated structures and systems with an example to demonstrate the prototype system.
文摘Structural safety against collapse will be ensured on the condition that stresses and strains in each element of concrete and reinforcement do not exceed the set limits. Different from the general design method, the required amounts of longitudinal and stirrup reinforcements in reinforced concrete beam under certain loads by the finite element design method are interactive. There is an approximate hyperbolic relation between them. Considering economy and the design principle that beam should be stronger for shear and weaker for bending, even the yield point of longitudinal reinforcement is taken as reference point for design. According to this point, a real-life beam is designed and the design steps of the finite element method are discussed.
文摘Designing airfoils according to given pressure (or velocity) distribution is one kind of free boundary problems. Free boundary condition can be coupled with the flow governing equations by variable-domain variational calculus, which makes it possible to calculate simultaneously the flow field and the free boundary. An accurate deduction of the variable-domain variational principles is taken herein to design airfoils in compressible and incompressible flows. Furthermore, two grid types (H and O) are used in the calculation with better results for the O-type grid. It is shown that convergence is accelerated and good results can be obtained even if the initial guessed airfoil shape is a triangle, demonstrating the strong adaptability of this method.
文摘Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrum ent panel frame by finite element simulation using the explicit code LS-DYNA. The manufacturing process for the instrument panel frame consists of tube pre-be nding and final hydroforming. To accomplish hydroforming process design successf ully, a thorough investigation of proper combination of process parameters such as internal hydraulic pressure and axial feeding is carried out by finite element simulation to predict the tube wall thickness and shape. An optimized process parameter combination is obtained and verified by the instrument panel frame hyd roforming experiment. The experiment shows that designed process parameters can be used in real production through FEA simulation, but tubular thinned amplitu de by FEA is less than that with the experiment.
基金Supported by National Natural Science Foundation of China(Grant Nos.51105092,61403106)International Science and Technology Cooperation Program of China(Grant No.2014DFR50250)the 111 Project,China(Grant No.B07018)
文摘The efficiency and precision of parameter calibration in discrete element method （DEM） are not satisfactory, and parameter calibration for granular heat transfer is rarely involved. Accordingly, parameter calibration for granular heat transfer with the DEM is studied. The heat transfer in granular assemblies is simulated with DEM, and the effective thermal conductivity （ETC） of these granular assemblies is measured with the transient method in simulations. The measurement testbed is designed to test the ETC of the granular assemblies under normal pressure and a vacuum based on the steady method. Central composite design （CCD） is used to simulate the impact of the DEM parameters on the ETC of granular assemblies, and the heat transfer parameters are calibrated and compared with experimental data. The results show that, within the scope of the considered parameters, the ETC of the granular assemblies increases with an increasing particle thermal conductivity and decreases with an increasing particle shear modulus and particle diameter. The particle thermal conductivity has the greatest impact on the ETC of granular assemblies followed by the particle shear modulus and then the particle diameter. The calibration results show good agreement with the experimental results. The error is less than 4%, which is within a reasonable range for the scope of the CCD parameters. The proposed research provides high efficiency and high accuracy parameter calibration for granular heat transfer in DEM.
文摘A design method of reinforced concrete (R. C.) offshore platforms with nonlinear finite element analysis is proposed. According to the method, a computer program is developed. In this program nonlinear constitutive relationships and strength criteria of concrete and steel bars are included, and the progressive cracking and crushing of the concrete are taken into account. Based on the stress distribution obtained by the nonlinear finite element analysis, the amount of reinforcement in the control sections can be computed and adjusted automatically by the program to satisfy the requirement of the design. The amount of reinforcement required in the control sections, which are obtained with the nonlinear finite element analysis, is agreeable to that obtained in the experiment. This shows that the design method of R. C. offshore platform with the nonlinear finite element method proposed by the authors is reliable for practical use.
文摘In this paper a method is developed to model the design process gene based on the extensible basic-element with the purpose of design process optimization and reuse. First, the principle of genetic engineering based design process optimization and reuse is put forward and analyzed. Second, the extensible basic-element model of the design process gene is established based on the models of the design process base and the base pair through analyzing the concept and structure of the design process gene and the extensible basic-element as well as its extensibility. Third, the features of divergence and scalability of the extensible basic-element model of the design process gene are discussed for carrying out the extension translation to the design process gene by way of inserting, deleting and updating design process bases. Finally, an example of building extensible basic-element models for the design process base, base pair and design process gene in mechanical product design and the mutation process of the design process gene in airplane design is presented which demonstrates the application of the method proposed in this paper.
文摘This paper describes the structure of the molds for making polycrystalline diamond compact （PDC） drilling bits. It represents the mold shapes by using the Finite Element technique, and compares the analytical results with available experimental data. Based on the results of Finite Element analysis, some areas of stress concentrations are determined, and modifications made, to the PDC （polycrystalline diamond compact） mold. A displacement plot and several stress contour plots are presented. Techniques of the mold design are discussed.
文摘ANSYS, the software of construction analysis, is used to analyze static and dynamic performances of a XH2408 gantry style numerical control （NC） milling machining center and optimize its construction using the finite element method. First, a finite element model is established and the static and dynamic analysis are completed as constraints and loads applied on the finite element model. It is found that both spindle box and gantry are the worst components of assembly in performance. Secondly, the spindle box and gantry are chosen as objects of optimal design separately, aiming to improve their performance. The optimal plans are accomplished on the basis of the minimum volume for the spindle box and the maximum inherent frequency for the gantry subject to the constrains. Finally, the machine tool improved is analyzed statically and dynamically based on the optimal results of the spindle box and gantry. The results show that optimal design with the finite element method increases static and dynamical performances of the XH2408 gantry style numerical control milling machining center and the technique is effective and practical in engineering applications.
文摘This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pillar size needed for entry protection, and(3) safety of bleeder entries during the advance of an adjacent longwall panel.While the finite element method is by far the most popular engineering design tool of the digital age, widespread use by the mining community has been impeded by the relatively high cost of and the need for lengthy specialized training in numerical methods.Implementation of UT3PC overcomes these impediments in three easy steps.First, a material properties file is prepared for the considered site.Next, mesh generation is automatic through an interactive process.A third and last step is simply execution of the program.Examples using data from several western coal mines illustrate the ease of using the application for analysis of main entries, barrier pillars, and bleeder entry safety.
文摘The load condition of the mineral sizer is discussed. Acoording to three typical load cases presented, FEM and optimization models are established. Computed the model problems by use of ANSYS software and sequential unconstrained minimization technique, the stress distribution on c rush tooth and it's optimal shape are aquired. After analyzing the results, the relation between stress distribution and structural parameters is presented.
