In this paper, the factors of affecting surface roughness and profiles accuracy of the machined larege depth diamter ratio aspheric surfaces in ultra-precision grinding process are analyzed theoretically. An ultra-pre...In this paper, the factors of affecting surface roughness and profiles accuracy of the machined larege depth diamter ratio aspheric surfaces in ultra-precision grinding process are analyzed theoretically. An ultra-precision aspheric grinding system is then designed and manufactured. Aerostatic form is adopted to build the spindle of the workpiece, transverse guideway, longitudinal guideway and the spindle of the grinder in this system. The following specification is achieved, such as the turning accuracy of the spindle of the workpiece is 0.05 μm, radial rigidity of the spindle is GE 220N/μm, axial rigidity is GE 160 N/μm, radial rigidity of the guideway is GE 200N/μm, the highest rotational speed of the grinder is 80 000 rev/min and its turning accuracy is 0.1 μm, the resolution of linear displacement of the transverse and longitudinal guideway is 4.9 nm. Adjusting range of this adjusting mechanism is 2 mm in the Y direction, the adjusting accuracy of the precise adjusting mechanism is 0.1 μm. Micro displacement measuring system of this ultra-precision aspheric grinding adopts two-backfeed strategy, and angle displacement back-feed is realized by photoelectric encoder, it’s resolution is 655 360 pulse/rev. after 4 frequency multiplication, it’s angle displacement resolution is achieved 2 621 440 pulse/rev. Straight-line displacement is monitored by single frequency laser interferometer (DLSTAX LTM-20B, made in Japan). This CNC system adopts inimitable bi-arc step length flex CN interpolation algorithm, it’s CN system resolution is 5 nm.So this aspheric grinding system ensures profile accuracy of the machined part. The resolution of this interferometer is 5 nm. Finally, lots of ultra-precision grinding experiments are carried out on this grinding system. Some optical aspheric parts, with profiles accuracy of 0.3 μm, surface roughness less than 0.01 μm, are obtained.展开更多
AIM: To validate whether the platelet count/spleen size ratio can be used to predict the presence of esophageal varices in Mexican patients with hepatic cirrhosis.
Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of re...Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of residual coal pillars.In this study,uniaxial compressive tests of coal specimens with five H/D(2.0,1.5,1.0,0.8 and 0.6)were performed,and the stress,strain and acoustic emission(AE)were monitored.Results show that the uniaxial compressive strength(UCS)and peak strain increase with H/D decreasing.An empirical equation is proposed to calculate the UCS based on the H/D.The AE activities during coal failure process can be separated into four periods.The span of quiet period and rapid decline period shorten with H/D decreasing.The smaller the H/D is,the more complicated the failure characteristics of coal will be.The failure form of coal with H/D of 2.0,1.5,and 1.0 is primarily shear failure,while splitting failure along the axial direction is the mainly mode when H/D is 0.8 or 0.6.The initiation,expansion,aggregation and connection of micro-cracks can be reflected by the real-time spatial evolution of AE event points.展开更多
An elastic vibration model for high length diameter ratio spinning rocket with attitude control system which can be used for trajectory simulation is established. The basic theory of elastic dynamics and vibration dy...An elastic vibration model for high length diameter ratio spinning rocket with attitude control system which can be used for trajectory simulation is established. The basic theory of elastic dynamics and vibration dynamics were both used to set up the elastic vibration model of rocket body. In order to study the problem more conveniently, the rocket's body was simplified to be an even beam with two free ends. The model was validated by simulation results and the test data.展开更多
AIM To determine the laboratory and radiologic parameters, including the platelet count(PC)-to-spleen diameter(SD) ratio as a non-invasive marker that may predict the presence of esophageal varices(EV) in children wit...AIM To determine the laboratory and radiologic parameters, including the platelet count(PC)-to-spleen diameter(SD) ratio as a non-invasive marker that may predict the presence of esophageal varices(EV) in children with cirrhosis.METHODS Eighty-nine patients with cirrhosis, but without a history of variceal bleeding were prospectively included. The children were grouped into 6-12 and 12-18 years of age groups. These groups were also divided into 2 subgroups(presence and absence of EV). All of the patients underwent a complete biochemical and radiologic evaluation. The PC(n/mm^3)-to-SD(mm) ratio was calculated for each patient. RESULTS Sixty-nine of 98(70.4%) patients had EV. The presence of ascites in all age groups was significantly associatedwith the presence of EV. There were no differences in serum albumin levels, PC, SD and the PC-to-SD ratio between the presence and absence of EV groups in both age groups(P > 0.05). CONCLUSION Laboratory and radiologic parameters, including the PC-to-SD ratio as a non-invasive marker(except for the presence of ascites), was inappropriate for detecting EV in children with cirrhosis.展开更多
The electromagnetic,flow,heat transfer and inclusions motion model of the channel-type induction heating(IH)tundish was established,and the effect of the channel diameter on the metallurgical behavior of the tundish w...The electromagnetic,flow,heat transfer and inclusions motion model of the channel-type induction heating(IH)tundish was established,and the effect of the channel diameter on the metallurgical behavior of the tundish was studied.The results show that the magnetic field in the channel of the IH tundish tends to concentrate on the surface layer and the side near the coil.As the channel diameter is increased from 100 to 180 mm,the maximum value of magnetic flux density in the channel decreases by 0.125 T,and the maximum value of electromagnetic force decreases by 11.83×10^(5) N m^(-3);however,the off-center distance of magnetic field increases by 9.4 mm,and the Joule heat in the channel decreases by 1004 kW,which leads to the reduction in temperature rising rate of the tundish from 1.41 to 0.59 K min^(-1).When the channel diameter is 100,140 and 180 mm,the maximum velocity at the channel exit before heating is 0.59,0.29 and 0.18 m s^(-1),and after heating for 1800 s,it is 1.52,1.12 and 0.92 m s^(-1),respectively.In addition,the total inclusions escape ratio after heating for 1800 s with a channel diameter of 140 mm can be reduced by 12.39% compared to that before heating,and the maximum difference of escape ratios for each strand is only 4.51% and 5.32% before heating and after heating for 1800 s,respectively.Compared with the channel diameters of 100 and 180 mm,the channel diameter of 140 mm is more favorable to improve the metallurgical effect of the IH tundish.展开更多
BACKGROUND The maximum outer diameter(MOD)of the appendix is an essential parameter for diagnosing acute appendicitis,but there is space for improvement in ultrasound(US)diagnostic performance.AIM To investigate wheth...BACKGROUND The maximum outer diameter(MOD)of the appendix is an essential parameter for diagnosing acute appendicitis,but there is space for improvement in ultrasound(US)diagnostic performance.AIM To investigate whether combining the ratio of the cross diameters(RATIO)of the appendix with MOD of the appendix can enhance the diagnostic performance of acute appendicitis.METHODS A retrospective study was conducted,and medical records of 233 patients with acute appendicitis and 112 patients with a normal appendix were reviewed.The MOD and RATIO of the appendix were calculated and tested for their diagnostic performance of acute appendicitis,both individually and in combination.RESULTS The RATIO for a normal appendix was 1.32±0.16,while for acute appendicitis it was 1.09±0.07.The cut-off value for RATIO was determined to be≤1.18.The area under the receiver operating characteristic curve(AUC)for diagnosing acute appendicitis using RATIO≤1.18 and MOD>6 mm was 0.870 and 0.652,respectively.There was a significant difference in AUC between RATIO≤1.18 and MOD>6 mm(P<0.0001).When comparing the combination of RATIO≤1.18 and MOD>6 mm with MOD>6 mm alone,the combination showed increased specificity,positive predictive value(PPV),and AUC.However,the sensitivity and negative predictive value decreased.CONCLUSION Combining RATIO of the appendix≤1.18 and MOD>6 mm can significantly improve the specificity,PPV,and AUC in the US diagnosis of acute appendicitis.展开更多
Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） cur...Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） curve.We classify impact craters to three types,which are simple crater,complex crater and basin.Using the most ＇pristine＇ or deepest craters in the data,three kinds of depth-diameter relationships are determined：the linear fit for simple crater is d=0.126D＋0.490 2;the best empirical power fit for complex crater is d=0.327 3D0.625 2;the best empirical power fit for basin is d=0.300 4D0.463 3,where d is the depth of the crater and D is the diameter of the crater,both in kilometers.The depth-diameter relationship for basin is characterized by a lower slope than that for complex craters,demonstrating that this morphologic transition corresponds to a further decrease in the depth of an impact structure relative to its diameter with increasing size.These relationships can then be used to estimate the theoretical depth of any impact radius,and therefore can be used to estimate the pristine shape of the crater around the Oceanus Procellarum area.The study of Oceanus Procellarum will help humankind to learn more about the origin and evolution of the moon.展开更多
Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling proces...Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling process on phase composition and morphology of the whiskers were investigated by TG-DSC（thermo gravimetric-differential scanning calorimeter）, XRD（X-ray diffraction）, and SEM（scanning electron microscope）. Pure K2Ti4O9 potassium titanate whiskers with large length-diameter ratio（r）（over 250） can be obtained at RT/K = 2.9 and TC = 950 ℃.展开更多
Current techniques of forest inventory rely on manual measurements and are slow and labor intensive.Recent developments in computer vision and depth sensing can produce accurate measurement data at significantly reduc...Current techniques of forest inventory rely on manual measurements and are slow and labor intensive.Recent developments in computer vision and depth sensing can produce accurate measurement data at significantly reduced time and labor costs.We developed the ForSense system to measure the diameters of trees at various points along the stem as well as stem straightness.Time use,mean absolute error(MAE),and root mean squared error(RMSE)metrics were used to compare the system against manual methods,and to compare the system against itself(reproducibility).Depth-derived diameter measurements of the stems at the heights of 0.3,1.4,and 2.7 m achieved RMSE of 1.7,1.5,and 2.7 cm,respectively.The ForSense system produced straightness measurement data that was highly correlated with straightness ratings by trained foresters.The ForSense system was also consistent,achieving sub-centimeter diameter difference with subsequent measures and less than 4%difference in straightness value between runs.This method of forest inventory,which is based on depth-image computer vision,is time efficient compared to manual methods and less computationally and technologically intensive compared to Structure-from-Motion(SFM)photogrammetry and ground-based LiDAR or terrestrial laser scanning(TLS).展开更多
Silicon carbide ceramics with different thicknesses/diameter ratios were prepared by using ultra-fine silicon carbide powder with the sintering additives of 1.0 wt% boron and 1.5 wt% carbon. The influence of thickness...Silicon carbide ceramics with different thicknesses/diameter ratios were prepared by using ultra-fine silicon carbide powder with the sintering additives of 1.0 wt% boron and 1.5 wt% carbon. The influence of thickness/diameter ratio on the microstructure and density of SiC ceramics was investigated in detail. The experimental results show that the addition of boron and carbon sintering aids can promote the densification process of SiC ceramic, leading to the low sintering temperature and improve mechanical properties. At 1950 ℃, SiC ceramic with a density of 99% exhibits Young's modulus, hardness, and flexural strength of 476 MPa, 28.3 GPa, and 334 MPa, respectively. It is found that long holding time has a positive effect on the uniformity of the microstructure and density distribution of SiC ceramics with large thickness/diameter ratios. Additionally, the sintering additive of boron can solid-solve into SiC, and then facilitate the phase transformation of SiC to form 6H-SiC and 4H-SiC composite ceramics.展开更多
Objective:Vesicoureteral reflux(VUR)index is a simple,validated tool that reliably predicts significant improvement and spontaneous resolution of primary reflux in children.The aim of this study was to evaluate and co...Objective:Vesicoureteral reflux(VUR)index is a simple,validated tool that reliably predicts significant improvement and spontaneous resolution of primary reflux in children.The aim of this study was to evaluate and compare the ureter diameter ratio(UDR)and VUR index(VURx)of patients treated with endoscopic injection(EI)and ureteroneocystostomy(UNC)methods in the pediatric age group due to primary VUR.Methods:Patients under the age of 18 years old who underwent EI and UNC with the diagnosis of primary VUR between January 2011 and September 2021 were determined as the participants.The UDR was assessed using voiding cystourethrography,and the VURx score was determined prior to treatment based on hospital records included in the study.Results:A total of 255 patients,60(23.5%)boys and 195(76.5%)girls,with a mean age of 76.5(range 13.0e204.0)months,were included in the study.EI was applied to 130(51.0%)patients and UNC was applied to 125(49.0%)patients due to primary VUR.The optimum cut-off for the distal UDR was obtained as 0.17 with sensitivity and specificity of 73.0%and 63.0%,respectively.The positive and negative predictive values were 66.0%and 70.0%,respectively.Conclusion:When the UDR and VURx score are evaluated together for the surgical treatment of primary VUR in the pediatric age group,it is thought that it may be useful in predicting the clinical course of the disease and evaluating surgical treatment options.展开更多
Background Previous studies have shown that an echocardiographic right/left ventricular end-diastolic diameter ratio(RV/LV ratio)≥0.9 is an independent predictor of poor prognosis in patients with acute pulmonary emb...Background Previous studies have shown that an echocardiographic right/left ventricular end-diastolic diameter ratio(RV/LV ratio)≥0.9 is an independent predictor of poor prognosis in patients with acute pulmonary embolism.The prognostic value of the RV/LV ratio in patients with idiopathic pulmonary arterial hypertension(IPAH)is still unknown.Methods We retrospectively enrolled 95 consecutive patients with newly diagnosed IPAH and 16 of them were reevaluated by echocardiography at 3-12 months following targeted therapy.Follow-up data were obtained by telephone interviews and review of the patients’records.Results The RV/LV ratio was in parallel with the severity of World Health Orgnization(WHO)functional class and mean right atrial pressure.The RV/LV ratio was positively correlated with total pulmonary resistance(P P P 2 saturation(P P=0.001),weight and absence of targeted therapy were independent predictors of death.No significant changes in the RV/LV ratio before and after targeted therapy were observed.A baseline RV/LV ratio≥0.84 or a further increase in the RV/LV ratio during targeted therapy indicated a poor prognosis.Conclusions The RV/LV ratio helps to assess the severity of IPAH and serves as an independent predictor of prognosis in patients with IPAH.展开更多
Planktonic foraminifer Globigerinoides ruber(white)and Trilobatus sacculifer are the most frequently used mixedlayer dwelling species for reconstructing past oceanic environments.Specifically,the Mg/Ca ratios of these...Planktonic foraminifer Globigerinoides ruber(white)and Trilobatus sacculifer are the most frequently used mixedlayer dwelling species for reconstructing past oceanic environments.Specifically,the Mg/Ca ratios of these two foraminiferal species have been used for reconstructing tropical/subtropical changes in sea surface temperature(SST).However,these two species have different morphotypes,of which the spatial and temporal differences in Mg/Ca ratios and their influencing factors are still unclear.Our objective is to investigate the potential differences between the Mg/Ca ratios of these different morphotypes of G.ruber(white)and T.sacculifer in the western Philippine Sea(WPS)and determine their implications for the reconstruction of SST and upper-ocean structure.Mg/Ca measurements are made on two basic morphotypes of G.ruber(white)[sensu stricto(s.s.)and sensu lato(s.l.)]and T.sacculifer[with(w)and without(w/o)a sac-like final chamber]on samples of Site MD06-3047B from the WPS.Our results reveal that Mg/Ca ratios of different G.ruber morphotypes show consistent differences;and those of T.sacculifer morphotypes show staged variations since MIS 3.It is suggested to select a single morphotype for reconstructing SST changes using the Mg/Ca ratios of G.ruber and T.sacculifer in the WPS.Furthermore,the Mg/Ca ratios between G.ruber s.s.and G.ruber s.l.[Δ(Mg/Ca)_(G.ruber s.s.-s.l.)]downcore MD06-3047B covaries with indexes of summer monsoon.Combining with the core-top results,showing regional variation of differences in theΔ(Mg/Ca)_(G.ruber s.s.-s.l.)over the western tropical Pacific,we propose thatΔ(Mg/Ca)_(G.ruber s.s.-s.l.)may tend to reflect summer mixed layer depth.展开更多
The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire f...The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire feeding speed and torch oscillating amplitude hare significant effects on the dopth-to-width ratio （D/W） of welds. The D/W ratio of welds increases significantly with the increase of welding speed without the oscillating of welding torch. It increased （from 0. 14 to 0. 26 ） with the increase of wire feeding speed while the torch oscillating. And it decreased linearly with the increase of torch oscillating amplitude. However, the influelwe of oscillating speed, wire extension and welding voltage on the D/W ratio of welds was not obvious.展开更多
Bed morphology is the result of a dynamic response to a complex meandering river system. It is an important factor for the further development of river. Based on the meandering river characterized by a large depth-to-...Bed morphology is the result of a dynamic response to a complex meandering river system. It is an important factor for the further development of river. Based on the meandering river characterized by a large depth-to-width ratio, a theoretical model is established with the coupling of Navier-Stokes （N-S）~ sediment transport, and bed deformation equations. The flow characteristics and bed response of river are obtained with the perturbation method. The research results show that, under the effect of two- dimensional flow disturbance, the bars and pools present the regular response. For a given sinuousness, the amplitude of the bed response can be used as a criterion to judge the bedform stability. The effects of the Reynolds number, disturbance wavenumber, sinuousness, and bed morphology gradient on the bed response development are described.展开更多
At great depth ratio, two methodologies based on the representative strain were improved to extract mechanical properties of metallic engineering structural materials from P-h curve of an indentation response. The imp...At great depth ratio, two methodologies based on the representative strain were improved to extract mechanical properties of metallic engineering structural materials from P-h curve of an indentation response. The improved aspects include： the com- bination of great ratio h1/R=0.1 and h2/R=0.4 replaced h1/R=0.01 and h2/R=0.06 （Cao＇s method） and h1/R=0.1 and h2/R=0.3 （Ogasawara＇s method）; three types of metallic engineering structural materials with obviously different elastic modulus were dealt with to get their calculation parameters, respectively; a new parameter reflecting the effect of work-hardening exponent n was introduced to get the dimensionless function which is independent of n and a relationship between W/（h3σrS） and E^＊/（σrS） at great depth ratio. By using the results of finite element simulation, the efficiency and accuracy of the improved method have been proved, and it showed that the accuracv of the improved method is much better than the former method.展开更多
In this paper, the ratio of powers in the frequency bands of β2 and θ waves in EEG signals (termed as the β2/θ -ratio) was introduced as a potential enhancement in measuring anesthesia depth. The β2/θ -ratio was...In this paper, the ratio of powers in the frequency bands of β2 and θ waves in EEG signals (termed as the β2/θ -ratio) was introduced as a potential enhancement in measuring anesthesia depth. The β2/θ -ratio was compared to the relative β-ratio which had been commercially used in the BIS monitor. Sensitivity and reliability of the β2/θ -ratio and EEG measurement locations were analyzed for their effectiveness in measuring anesthesia depth during different stages of propofol induced anesthesia (awake, induction, maintenance, and emergence). The analysis indicated that 1) the relative β -ratio and β2/θ-ratio derived from the prefrontal, frontal, and the central cortex EEG signals were of substantial sensitivity for capturing anesthesia depth changes. 2) Certain channel positions in the frontal part of the cortex, such as , had the combined benefits of substantial sensitivity and noise resistance. 3) The β2/θ-ratio captured the initial excitation, while the relative β -ratio did not. 4) In the maintenance and emergence stages, the β2/θ -ratio showed improved reliability. Implications: The ratio of powers in EEG frequency bands and derived from the frontal cortex EEG channels has combined benefits of substantial sensitivity and noise resistance in measuring anesthesia depth.展开更多
Compound open channel flows appear in most natural rivers are of great importance in river management and flood control.In this study,large eddy simulations were carried out to simulate the compound open channel flows...Compound open channel flows appear in most natural rivers are of great importance in river management and flood control.In this study,large eddy simulations were carried out to simulate the compound open channel flows with four different depth ratios(hr=0.10,0.25,0.50,and 0.75).The main flow velocity,secondary flow,Reynolds stress,and bed shear stress were obtained from numerical simulations.The depth-averaged stream wise momentum equation was used to quantify the lateral momentum exchange between the main channel and floodplain.The instantaneous coherent structures were presented by the Q criterion method.The impact of hr on flow structure and turbulence charac-teristics was analyzed.The results showed that with the increase of hr,the high velocity area in the main channel shifted to the floodplain,and the dip phenomenon became more obvious;the Reynolds stress largely contributed to the lateral momentum exchange within the flows near the side walls of floodplain;and the vortex structures were found to significantly increase in the floodplain region.展开更多
文摘In this paper, the factors of affecting surface roughness and profiles accuracy of the machined larege depth diamter ratio aspheric surfaces in ultra-precision grinding process are analyzed theoretically. An ultra-precision aspheric grinding system is then designed and manufactured. Aerostatic form is adopted to build the spindle of the workpiece, transverse guideway, longitudinal guideway and the spindle of the grinder in this system. The following specification is achieved, such as the turning accuracy of the spindle of the workpiece is 0.05 μm, radial rigidity of the spindle is GE 220N/μm, axial rigidity is GE 160 N/μm, radial rigidity of the guideway is GE 200N/μm, the highest rotational speed of the grinder is 80 000 rev/min and its turning accuracy is 0.1 μm, the resolution of linear displacement of the transverse and longitudinal guideway is 4.9 nm. Adjusting range of this adjusting mechanism is 2 mm in the Y direction, the adjusting accuracy of the precise adjusting mechanism is 0.1 μm. Micro displacement measuring system of this ultra-precision aspheric grinding adopts two-backfeed strategy, and angle displacement back-feed is realized by photoelectric encoder, it’s resolution is 655 360 pulse/rev. after 4 frequency multiplication, it’s angle displacement resolution is achieved 2 621 440 pulse/rev. Straight-line displacement is monitored by single frequency laser interferometer (DLSTAX LTM-20B, made in Japan). This CNC system adopts inimitable bi-arc step length flex CN interpolation algorithm, it’s CN system resolution is 5 nm.So this aspheric grinding system ensures profile accuracy of the machined part. The resolution of this interferometer is 5 nm. Finally, lots of ultra-precision grinding experiments are carried out on this grinding system. Some optical aspheric parts, with profiles accuracy of 0.3 μm, surface roughness less than 0.01 μm, are obtained.
文摘AIM: To validate whether the platelet count/spleen size ratio can be used to predict the presence of esophageal varices in Mexican patients with hepatic cirrhosis.
基金Projects(51974192,52004172)supported by the National Natural Science Foundation of ChinaProject(51925402)supported by the Distinguished Youth Funds of National Natural Science Foundation of ChinaProject(U1710258)supported by the Joint Funds of National Natural Science Foundation of China and Shanxi Province,China。
文摘Residual coal pillars play an important role in mining the adjacent coal seam safely,managing the gobs and maintaining the stability of abandoned coal mines.The height to diameter ratio(H/D)affects the stability of residual coal pillars.In this study,uniaxial compressive tests of coal specimens with five H/D(2.0,1.5,1.0,0.8 and 0.6)were performed,and the stress,strain and acoustic emission(AE)were monitored.Results show that the uniaxial compressive strength(UCS)and peak strain increase with H/D decreasing.An empirical equation is proposed to calculate the UCS based on the H/D.The AE activities during coal failure process can be separated into four periods.The span of quiet period and rapid decline period shorten with H/D decreasing.The smaller the H/D is,the more complicated the failure characteristics of coal will be.The failure form of coal with H/D of 2.0,1.5,and 1.0 is primarily shear failure,while splitting failure along the axial direction is the mainly mode when H/D is 0.8 or 0.6.The initiation,expansion,aggregation and connection of micro-cracks can be reflected by the real-time spatial evolution of AE event points.
文摘An elastic vibration model for high length diameter ratio spinning rocket with attitude control system which can be used for trajectory simulation is established. The basic theory of elastic dynamics and vibration dynamics were both used to set up the elastic vibration model of rocket body. In order to study the problem more conveniently, the rocket's body was simplified to be an even beam with two free ends. The model was validated by simulation results and the test data.
文摘AIM To determine the laboratory and radiologic parameters, including the platelet count(PC)-to-spleen diameter(SD) ratio as a non-invasive marker that may predict the presence of esophageal varices(EV) in children with cirrhosis.METHODS Eighty-nine patients with cirrhosis, but without a history of variceal bleeding were prospectively included. The children were grouped into 6-12 and 12-18 years of age groups. These groups were also divided into 2 subgroups(presence and absence of EV). All of the patients underwent a complete biochemical and radiologic evaluation. The PC(n/mm^3)-to-SD(mm) ratio was calculated for each patient. RESULTS Sixty-nine of 98(70.4%) patients had EV. The presence of ascites in all age groups was significantly associatedwith the presence of EV. There were no differences in serum albumin levels, PC, SD and the PC-to-SD ratio between the presence and absence of EV groups in both age groups(P > 0.05). CONCLUSION Laboratory and radiologic parameters, including the PC-to-SD ratio as a non-invasive marker(except for the presence of ascites), was inappropriate for detecting EV in children with cirrhosis.
基金funded by the National Natural Science Foundation of China(NSFC)(Grant Nos.51874033 and U1860111).
文摘The electromagnetic,flow,heat transfer and inclusions motion model of the channel-type induction heating(IH)tundish was established,and the effect of the channel diameter on the metallurgical behavior of the tundish was studied.The results show that the magnetic field in the channel of the IH tundish tends to concentrate on the surface layer and the side near the coil.As the channel diameter is increased from 100 to 180 mm,the maximum value of magnetic flux density in the channel decreases by 0.125 T,and the maximum value of electromagnetic force decreases by 11.83×10^(5) N m^(-3);however,the off-center distance of magnetic field increases by 9.4 mm,and the Joule heat in the channel decreases by 1004 kW,which leads to the reduction in temperature rising rate of the tundish from 1.41 to 0.59 K min^(-1).When the channel diameter is 100,140 and 180 mm,the maximum velocity at the channel exit before heating is 0.59,0.29 and 0.18 m s^(-1),and after heating for 1800 s,it is 1.52,1.12 and 0.92 m s^(-1),respectively.In addition,the total inclusions escape ratio after heating for 1800 s with a channel diameter of 140 mm can be reduced by 12.39% compared to that before heating,and the maximum difference of escape ratios for each strand is only 4.51% and 5.32% before heating and after heating for 1800 s,respectively.Compared with the channel diameters of 100 and 180 mm,the channel diameter of 140 mm is more favorable to improve the metallurgical effect of the IH tundish.
文摘BACKGROUND The maximum outer diameter(MOD)of the appendix is an essential parameter for diagnosing acute appendicitis,but there is space for improvement in ultrasound(US)diagnostic performance.AIM To investigate whether combining the ratio of the cross diameters(RATIO)of the appendix with MOD of the appendix can enhance the diagnostic performance of acute appendicitis.METHODS A retrospective study was conducted,and medical records of 233 patients with acute appendicitis and 112 patients with a normal appendix were reviewed.The MOD and RATIO of the appendix were calculated and tested for their diagnostic performance of acute appendicitis,both individually and in combination.RESULTS The RATIO for a normal appendix was 1.32±0.16,while for acute appendicitis it was 1.09±0.07.The cut-off value for RATIO was determined to be≤1.18.The area under the receiver operating characteristic curve(AUC)for diagnosing acute appendicitis using RATIO≤1.18 and MOD>6 mm was 0.870 and 0.652,respectively.There was a significant difference in AUC between RATIO≤1.18 and MOD>6 mm(P<0.0001).When comparing the combination of RATIO≤1.18 and MOD>6 mm with MOD>6 mm alone,the combination showed increased specificity,positive predictive value(PPV),and AUC.However,the sensitivity and negative predictive value decreased.CONCLUSION Combining RATIO of the appendix≤1.18 and MOD>6 mm can significantly improve the specificity,PPV,and AUC in the US diagnosis of acute appendicitis.
基金supported by the 863 Key Project (No. 2004AA735020)the Chang’e Data Special Funding
文摘Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） curve.We classify impact craters to three types,which are simple crater,complex crater and basin.Using the most ＇pristine＇ or deepest craters in the data,three kinds of depth-diameter relationships are determined：the linear fit for simple crater is d=0.126D＋0.490 2;the best empirical power fit for complex crater is d=0.327 3D0.625 2;the best empirical power fit for basin is d=0.300 4D0.463 3,where d is the depth of the crater and D is the diameter of the crater,both in kilometers.The depth-diameter relationship for basin is characterized by a lower slope than that for complex craters,demonstrating that this morphologic transition corresponds to a further decrease in the depth of an impact structure relative to its diameter with increasing size.These relationships can then be used to estimate the theoretical depth of any impact radius,and therefore can be used to estimate the pristine shape of the crater around the Oceanus Procellarum area.The study of Oceanus Procellarum will help humankind to learn more about the origin and evolution of the moon.
基金Funded by the Natural Science Foundation Key Project of Hubei Province(No.2011CDA060)
文摘Pure K2Ti4O9 whiskers were prepared by KDC（Kneading-Drying-Calcination） method with TiO2 and K2CO3 as raw materials. The influences of TiO2/K2CO3 molar ratio（RT/K）, calcination temperature（TC） and cooling process on phase composition and morphology of the whiskers were investigated by TG-DSC（thermo gravimetric-differential scanning calorimeter）, XRD（X-ray diffraction）, and SEM（scanning electron microscope）. Pure K2Ti4O9 potassium titanate whiskers with large length-diameter ratio（r）（over 250） can be obtained at RT/K = 2.9 and TC = 950 ℃.
基金funded in part by the United States Department of Agriculture Forest Service,Northern Research Station,USDA Hardwood Tree Improvement and Regeneration CenterUSDA National Institute of Food and Agriculture McIntire Stennis project (IND011523MS)。
文摘Current techniques of forest inventory rely on manual measurements and are slow and labor intensive.Recent developments in computer vision and depth sensing can produce accurate measurement data at significantly reduced time and labor costs.We developed the ForSense system to measure the diameters of trees at various points along the stem as well as stem straightness.Time use,mean absolute error(MAE),and root mean squared error(RMSE)metrics were used to compare the system against manual methods,and to compare the system against itself(reproducibility).Depth-derived diameter measurements of the stems at the heights of 0.3,1.4,and 2.7 m achieved RMSE of 1.7,1.5,and 2.7 cm,respectively.The ForSense system produced straightness measurement data that was highly correlated with straightness ratings by trained foresters.The ForSense system was also consistent,achieving sub-centimeter diameter difference with subsequent measures and less than 4%difference in straightness value between runs.This method of forest inventory,which is based on depth-image computer vision,is time efficient compared to manual methods and less computationally and technologically intensive compared to Structure-from-Motion(SFM)photogrammetry and ground-based LiDAR or terrestrial laser scanning(TLS).
基金Funded by the National Key Research and Development Plan of China (No.2017YFB0310400)the National Natural Science Foundation of China (No.5167020705)
文摘Silicon carbide ceramics with different thicknesses/diameter ratios were prepared by using ultra-fine silicon carbide powder with the sintering additives of 1.0 wt% boron and 1.5 wt% carbon. The influence of thickness/diameter ratio on the microstructure and density of SiC ceramics was investigated in detail. The experimental results show that the addition of boron and carbon sintering aids can promote the densification process of SiC ceramic, leading to the low sintering temperature and improve mechanical properties. At 1950 ℃, SiC ceramic with a density of 99% exhibits Young's modulus, hardness, and flexural strength of 476 MPa, 28.3 GPa, and 334 MPa, respectively. It is found that long holding time has a positive effect on the uniformity of the microstructure and density distribution of SiC ceramics with large thickness/diameter ratios. Additionally, the sintering additive of boron can solid-solve into SiC, and then facilitate the phase transformation of SiC to form 6H-SiC and 4H-SiC composite ceramics.
文摘Objective:Vesicoureteral reflux(VUR)index is a simple,validated tool that reliably predicts significant improvement and spontaneous resolution of primary reflux in children.The aim of this study was to evaluate and compare the ureter diameter ratio(UDR)and VUR index(VURx)of patients treated with endoscopic injection(EI)and ureteroneocystostomy(UNC)methods in the pediatric age group due to primary VUR.Methods:Patients under the age of 18 years old who underwent EI and UNC with the diagnosis of primary VUR between January 2011 and September 2021 were determined as the participants.The UDR was assessed using voiding cystourethrography,and the VURx score was determined prior to treatment based on hospital records included in the study.Results:A total of 255 patients,60(23.5%)boys and 195(76.5%)girls,with a mean age of 76.5(range 13.0e204.0)months,were included in the study.EI was applied to 130(51.0%)patients and UNC was applied to 125(49.0%)patients due to primary VUR.The optimum cut-off for the distal UDR was obtained as 0.17 with sensitivity and specificity of 73.0%and 63.0%,respectively.The positive and negative predictive values were 66.0%and 70.0%,respectively.Conclusion:When the UDR and VURx score are evaluated together for the surgical treatment of primary VUR in the pediatric age group,it is thought that it may be useful in predicting the clinical course of the disease and evaluating surgical treatment options.
文摘Background Previous studies have shown that an echocardiographic right/left ventricular end-diastolic diameter ratio(RV/LV ratio)≥0.9 is an independent predictor of poor prognosis in patients with acute pulmonary embolism.The prognostic value of the RV/LV ratio in patients with idiopathic pulmonary arterial hypertension(IPAH)is still unknown.Methods We retrospectively enrolled 95 consecutive patients with newly diagnosed IPAH and 16 of them were reevaluated by echocardiography at 3-12 months following targeted therapy.Follow-up data were obtained by telephone interviews and review of the patients’records.Results The RV/LV ratio was in parallel with the severity of World Health Orgnization(WHO)functional class and mean right atrial pressure.The RV/LV ratio was positively correlated with total pulmonary resistance(P P P 2 saturation(P P=0.001),weight and absence of targeted therapy were independent predictors of death.No significant changes in the RV/LV ratio before and after targeted therapy were observed.A baseline RV/LV ratio≥0.84 or a further increase in the RV/LV ratio during targeted therapy indicated a poor prognosis.Conclusions The RV/LV ratio helps to assess the severity of IPAH and serves as an independent predictor of prognosis in patients with IPAH.
基金The National Natural Science Foundation of China under contract Nos 41830539 and 41906063the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.2022QNLM050203the Taishan Scholars Project Funding under contract No.ts20190963。
文摘Planktonic foraminifer Globigerinoides ruber(white)and Trilobatus sacculifer are the most frequently used mixedlayer dwelling species for reconstructing past oceanic environments.Specifically,the Mg/Ca ratios of these two foraminiferal species have been used for reconstructing tropical/subtropical changes in sea surface temperature(SST).However,these two species have different morphotypes,of which the spatial and temporal differences in Mg/Ca ratios and their influencing factors are still unclear.Our objective is to investigate the potential differences between the Mg/Ca ratios of these different morphotypes of G.ruber(white)and T.sacculifer in the western Philippine Sea(WPS)and determine their implications for the reconstruction of SST and upper-ocean structure.Mg/Ca measurements are made on two basic morphotypes of G.ruber(white)[sensu stricto(s.s.)and sensu lato(s.l.)]and T.sacculifer[with(w)and without(w/o)a sac-like final chamber]on samples of Site MD06-3047B from the WPS.Our results reveal that Mg/Ca ratios of different G.ruber morphotypes show consistent differences;and those of T.sacculifer morphotypes show staged variations since MIS 3.It is suggested to select a single morphotype for reconstructing SST changes using the Mg/Ca ratios of G.ruber and T.sacculifer in the WPS.Furthermore,the Mg/Ca ratios between G.ruber s.s.and G.ruber s.l.[Δ(Mg/Ca)_(G.ruber s.s.-s.l.)]downcore MD06-3047B covaries with indexes of summer monsoon.Combining with the core-top results,showing regional variation of differences in theΔ(Mg/Ca)_(G.ruber s.s.-s.l.)over the western tropical Pacific,we propose thatΔ(Mg/Ca)_(G.ruber s.s.-s.l.)may tend to reflect summer mixed layer depth.
文摘The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire feeding speed and torch oscillating amplitude hare significant effects on the dopth-to-width ratio （D/W） of welds. The D/W ratio of welds increases significantly with the increase of welding speed without the oscillating of welding torch. It increased （from 0. 14 to 0. 26 ） with the increase of wire feeding speed while the torch oscillating. And it decreased linearly with the increase of torch oscillating amplitude. However, the influelwe of oscillating speed, wire extension and welding voltage on the D/W ratio of welds was not obvious.
文摘Bed morphology is the result of a dynamic response to a complex meandering river system. It is an important factor for the further development of river. Based on the meandering river characterized by a large depth-to-width ratio, a theoretical model is established with the coupling of Navier-Stokes （N-S）~ sediment transport, and bed deformation equations. The flow characteristics and bed response of river are obtained with the perturbation method. The research results show that, under the effect of two- dimensional flow disturbance, the bars and pools present the regular response. For a given sinuousness, the amplitude of the bed response can be used as a criterion to judge the bedform stability. The effects of the Reynolds number, disturbance wavenumber, sinuousness, and bed morphology gradient on the bed response development are described.
文摘At great depth ratio, two methodologies based on the representative strain were improved to extract mechanical properties of metallic engineering structural materials from P-h curve of an indentation response. The improved aspects include： the com- bination of great ratio h1/R=0.1 and h2/R=0.4 replaced h1/R=0.01 and h2/R=0.06 （Cao＇s method） and h1/R=0.1 and h2/R=0.3 （Ogasawara＇s method）; three types of metallic engineering structural materials with obviously different elastic modulus were dealt with to get their calculation parameters, respectively; a new parameter reflecting the effect of work-hardening exponent n was introduced to get the dimensionless function which is independent of n and a relationship between W/（h3σrS） and E^＊/（σrS） at great depth ratio. By using the results of finite element simulation, the efficiency and accuracy of the improved method have been proved, and it showed that the accuracv of the improved method is much better than the former method.
文摘In this paper, the ratio of powers in the frequency bands of β2 and θ waves in EEG signals (termed as the β2/θ -ratio) was introduced as a potential enhancement in measuring anesthesia depth. The β2/θ -ratio was compared to the relative β-ratio which had been commercially used in the BIS monitor. Sensitivity and reliability of the β2/θ -ratio and EEG measurement locations were analyzed for their effectiveness in measuring anesthesia depth during different stages of propofol induced anesthesia (awake, induction, maintenance, and emergence). The analysis indicated that 1) the relative β -ratio and β2/θ-ratio derived from the prefrontal, frontal, and the central cortex EEG signals were of substantial sensitivity for capturing anesthesia depth changes. 2) Certain channel positions in the frontal part of the cortex, such as , had the combined benefits of substantial sensitivity and noise resistance. 3) The β2/θ-ratio captured the initial excitation, while the relative β -ratio did not. 4) In the maintenance and emergence stages, the β2/θ -ratio showed improved reliability. Implications: The ratio of powers in EEG frequency bands and derived from the frontal cortex EEG channels has combined benefits of substantial sensitivity and noise resistance in measuring anesthesia depth.
基金supported by the Fundamental Research Funds for the Central Universities(Grants No.B200202116 and B200204044)the National Natural Science Foundation of China(Grant No.51879086)the 111 Project from the Minstry of Education and State Administration of Foreign Expert Affairs of China(Grant No.B17015).
文摘Compound open channel flows appear in most natural rivers are of great importance in river management and flood control.In this study,large eddy simulations were carried out to simulate the compound open channel flows with four different depth ratios(hr=0.10,0.25,0.50,and 0.75).The main flow velocity,secondary flow,Reynolds stress,and bed shear stress were obtained from numerical simulations.The depth-averaged stream wise momentum equation was used to quantify the lateral momentum exchange between the main channel and floodplain.The instantaneous coherent structures were presented by the Q criterion method.The impact of hr on flow structure and turbulence charac-teristics was analyzed.The results showed that with the increase of hr,the high velocity area in the main channel shifted to the floodplain,and the dip phenomenon became more obvious;the Reynolds stress largely contributed to the lateral momentum exchange within the flows near the side walls of floodplain;and the vortex structures were found to significantly increase in the floodplain region.
