Mineral exploration is done by different methods. Geophysical and geochemical studies are two powerful tools in this field. In integrated studies, the results of each study are used to determine the location of the dr...Mineral exploration is done by different methods. Geophysical and geochemical studies are two powerful tools in this field. In integrated studies, the results of each study are used to determine the location of the drilling boreholes. The purpose of this study is to use field geophysics to calculate the depth of mineral reserve. The study area is located 38 km from Zarand city called Jalalabad iron mine. In this study, gravimetric data were measured and mineral depth was calculated using the Euler method. 1314 readings have been performed in this area. The rocks of the region include volcanic and sedimentary. The source of the mineralization in the area is hydrothermal processes. After gravity measuring in the region, the data were corrected, then various methods such as anomalous map remaining in levels one and two, upward expansion, first and second-degree vertical derivatives, analytical method, and analytical signal were drawn, and finally, the depth of the deposit was estimated by Euler method. As a result, the depth of the mineral deposit was calculated to be between 20 and 30 meters on average.展开更多
An understanding of the amount and type of aerosols present in the atmosphere is required for the atmospheric correction of satellite imagery. A sensitivity analysis of the atmospheric inputs to the MOD09 software has...An understanding of the amount and type of aerosols present in the atmosphere is required for the atmospheric correction of satellite imagery. A sensitivity analysis of the atmospheric inputs to the MOD09 software has shown that uncertainty in the estimation of Aerosol Optical Depth (AOD) has the greatest impact on the accuracy of atmospheric correction of MODIS data. The MOD09 software used for the generation of surface reflectance products estimates the AOD of the atmosphere at the time of image acquisition. AOD measurements retrieved from MODIS were compared with near-simultaneous AErosol RObotic NETwork (AERONET) data over three sites in Australia, using time-series of MODIS surface reflectance products. The results of the study provide an important independent validation of ACRES MODIS Surface Reflectance Products. This procedure may be applied to long time series MODIS data for estimating the accuracy of MOD09 retrieved AOD.展开更多
Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove ...Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove regional trends. Major similarities in magnetic field orientation and intensities were observed at identical locations on both the regional and TMI data grids. From the regional and TMI gridded datasets, the residual dataset was generated which represents the very shallow geological features of the basin. Processing this residual data grid using the Source Parameter Imaging (SPI) for magnetic depth suggests that the estimated depths to magnetic sources in the basin range from about 271 m to 3552 m. The highest depths are located in two main locations somewhere around the central portion of the study area which correspond to the area with positive magnetic susceptibilities, as well as the areas extending outwards across the eastern boundary of the study area. Shallow magnetic depths are prominent towards the NW portion of the basin and also correspond to areas of negative magnetic susceptibilities. The basin generally exhibits a variation in depth of magnetic sources with high, average and shallow depths. The presence of intrusive igneous rocks was also observed in this basin. This characteristic is a pointer to the existence of geologic resources of interest for exploration in the basin.展开更多
Gravity survey was done at the Eburru area to estimate the source depth locations and delineate the fault boundaries using 3D Euler deconvolution. Gravity data was collected using CG-5 gravimeter. Gravity data reducti...Gravity survey was done at the Eburru area to estimate the source depth locations and delineate the fault boundaries using 3D Euler deconvolution. Gravity data was collected using CG-5 gravimeter. Gravity data reductions were done by applying drift correction, latitude correction, free air correction, Bouguer correction and terrain correction to the observed raw data to obtain complete bouguer anomaly (CBA). The CBA data was transferred to Oasis montaj software for Euler deconvolution processing. The 3D Euler deconvolution was carried out to determine and estimate the depth of the density bodies. Euler deconvolution locates the gravity anomaly source and estimates its depth from the gravity observation level. Euler deconvolution was preferred to other filtering methods in this study as solutions are only determined over identified analytic signal peaks, the window size varies according to anomaly size and the final solution involves only a few more precise depth estimates. The Euler deconvolution was performed using structural indices of 0.5, 1.0 and 2.0. Results from this analysis indicated that the CBA values in this study area range from gravity values of -272 mGal to -286 mGal and residual Bouguer anomaly amplitude range between -3 mGal and 3.4 mGal. The 0.5, 1.0 and 2.0 structural indices generated five solutions at depth range of 433 m - 2269 m, 801 m - 1433 m and 1170 m - 2246 m respectively occurring almost at the same locations on gravity highs. The deep structures were observed to occur in the northern part of the study area, and interpreted to be dense intruding masses likely to be trapped by the overlying cap rock at these depths. These could be geothermal heat sources that can be exploited to generate geothermal energy.展开更多
Analysis of Argo float trajectories at 1 000 m and temperature at 950 m in the North Atlantic between November 2003 and January 2005 demonstrates the existence of two different circulation modes with fast transition b...Analysis of Argo float trajectories at 1 000 m and temperature at 950 m in the North Atlantic between November 2003 and January 2005 demonstrates the existence of two different circulation modes with fast transition between them. Each mode has a pair of cyclonic - anticyclonic gyres. The difference is the location of the cyclonic gyre. The cyclonic gyre stretches from southeast to northwest in the first mode and from the southwest to the northeast in the second mode. The observed modes strongly affect the heat and salt transport in the North Atlantic. In particular, the second mode slows down the westward transport of the warm and saline water from the Mediterranean Sea.展开更多
The hypocentral depths of more than 200 Chinese earthquakes, of magnitudes from M 8.6 to M 3.0, are calculated from macroseismic data carried on earthquake catalogs, by using the formula for macroseismic hypocen...The hypocentral depths of more than 200 Chinese earthquakes, of magnitudes from M 8.6 to M 3.0, are calculated from macroseismic data carried on earthquake catalogs, by using the formula for macroseismic hypocentral depths and the formula for general solution of macroseismic hypocentral depths. The results are plotted on maps to show their geographical distribution. It can be seen that most Chinese earthquakes are shollow ones. Of the 200 earthquakes calculated, 162(81.0%) hypocenters are shallower than 9 km, of which 111 (55.5%) hypocenters are shallower than 5 km. Such shallow earthquakes are mostly distributed in the provinces near to the North South Earthquake Belt, while the rest are scattered in the other provinces(except Zhejiang province). Earthquakes of medium(between 10 and 20 km) depth are relatively few (32 in number, 15.0%); they are distributed along the North South Earthquake Belt, and the western part of Xinjiang Uygur Autonomous Region and in provinces Shaanxi, Shanxi and Shandong (along the Tanlu Fracture Zone, crossing the sea to northeast China). Deep earthquakes are rare, being scattered in south Yunnan and the east end of Inner Mongolia Uygur Autonomous Region.展开更多
Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with ...Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with SD measurements from in situ observations and passive microwave remote sensing of Advanced Microwave Scanning Radiometer-EOS （AMSR-E） and snow cover measurements of the Interactive Multisensor Snow and Ice Mapping System （IMS）. AMSR-E SD at 25 km spatial resolution was retrieved from AMSR-E products of snow density and snow water equivalent and then corrected using the SD from in situ observations and IMS snow cover. Corrected AMSR-E SD images were then resampled to act as ＂virtual＂ in situ observations to combine with the real in situ observations to interpolate at 4 km spatial resolution SD using the Cressman method. Finally, daily SD data generation for several regions of China demonstrated that the method is well suited to the generation of higher spatial resolution SD data in regions with a lower Digital Elevation Model （DEM） but not so well suited to regions at high altitude and with an undulating terrain, such as the Tibetan Plateau. Analysis of the longer time period SD data generation for January between 2003 and 2010 in northern Xinjiang also demonstrated the feasibility of the method.展开更多
文摘Mineral exploration is done by different methods. Geophysical and geochemical studies are two powerful tools in this field. In integrated studies, the results of each study are used to determine the location of the drilling boreholes. The purpose of this study is to use field geophysics to calculate the depth of mineral reserve. The study area is located 38 km from Zarand city called Jalalabad iron mine. In this study, gravimetric data were measured and mineral depth was calculated using the Euler method. 1314 readings have been performed in this area. The rocks of the region include volcanic and sedimentary. The source of the mineralization in the area is hydrothermal processes. After gravity measuring in the region, the data were corrected, then various methods such as anomalous map remaining in levels one and two, upward expansion, first and second-degree vertical derivatives, analytical method, and analytical signal were drawn, and finally, the depth of the deposit was estimated by Euler method. As a result, the depth of the mineral deposit was calculated to be between 20 and 30 meters on average.
文摘An understanding of the amount and type of aerosols present in the atmosphere is required for the atmospheric correction of satellite imagery. A sensitivity analysis of the atmospheric inputs to the MOD09 software has shown that uncertainty in the estimation of Aerosol Optical Depth (AOD) has the greatest impact on the accuracy of atmospheric correction of MODIS data. The MOD09 software used for the generation of surface reflectance products estimates the AOD of the atmosphere at the time of image acquisition. AOD measurements retrieved from MODIS were compared with near-simultaneous AErosol RObotic NETwork (AERONET) data over three sites in Australia, using time-series of MODIS surface reflectance products. The results of the study provide an important independent validation of ACRES MODIS Surface Reflectance Products. This procedure may be applied to long time series MODIS data for estimating the accuracy of MOD09 retrieved AOD.
文摘Aeromagnetic data over the Mamfe Basin have been processed. A regional magnetic gridded dataset was obtained from the Total Magnetic Intensity (TMI) data grid using a 3 × 3 convolution (Hanning) filter to remove regional trends. Major similarities in magnetic field orientation and intensities were observed at identical locations on both the regional and TMI data grids. From the regional and TMI gridded datasets, the residual dataset was generated which represents the very shallow geological features of the basin. Processing this residual data grid using the Source Parameter Imaging (SPI) for magnetic depth suggests that the estimated depths to magnetic sources in the basin range from about 271 m to 3552 m. The highest depths are located in two main locations somewhere around the central portion of the study area which correspond to the area with positive magnetic susceptibilities, as well as the areas extending outwards across the eastern boundary of the study area. Shallow magnetic depths are prominent towards the NW portion of the basin and also correspond to areas of negative magnetic susceptibilities. The basin generally exhibits a variation in depth of magnetic sources with high, average and shallow depths. The presence of intrusive igneous rocks was also observed in this basin. This characteristic is a pointer to the existence of geologic resources of interest for exploration in the basin.
文摘Gravity survey was done at the Eburru area to estimate the source depth locations and delineate the fault boundaries using 3D Euler deconvolution. Gravity data was collected using CG-5 gravimeter. Gravity data reductions were done by applying drift correction, latitude correction, free air correction, Bouguer correction and terrain correction to the observed raw data to obtain complete bouguer anomaly (CBA). The CBA data was transferred to Oasis montaj software for Euler deconvolution processing. The 3D Euler deconvolution was carried out to determine and estimate the depth of the density bodies. Euler deconvolution locates the gravity anomaly source and estimates its depth from the gravity observation level. Euler deconvolution was preferred to other filtering methods in this study as solutions are only determined over identified analytic signal peaks, the window size varies according to anomaly size and the final solution involves only a few more precise depth estimates. The Euler deconvolution was performed using structural indices of 0.5, 1.0 and 2.0. Results from this analysis indicated that the CBA values in this study area range from gravity values of -272 mGal to -286 mGal and residual Bouguer anomaly amplitude range between -3 mGal and 3.4 mGal. The 0.5, 1.0 and 2.0 structural indices generated five solutions at depth range of 433 m - 2269 m, 801 m - 1433 m and 1170 m - 2246 m respectively occurring almost at the same locations on gravity highs. The deep structures were observed to occur in the northern part of the study area, and interpreted to be dense intruding masses likely to be trapped by the overlying cap rock at these depths. These could be geothermal heat sources that can be exploited to generate geothermal energy.
基金The Naval Postgraduate School and the National Natural Science Foundation of China
文摘Analysis of Argo float trajectories at 1 000 m and temperature at 950 m in the North Atlantic between November 2003 and January 2005 demonstrates the existence of two different circulation modes with fast transition between them. Each mode has a pair of cyclonic - anticyclonic gyres. The difference is the location of the cyclonic gyre. The cyclonic gyre stretches from southeast to northwest in the first mode and from the southwest to the northeast in the second mode. The observed modes strongly affect the heat and salt transport in the North Atlantic. In particular, the second mode slows down the westward transport of the warm and saline water from the Mediterranean Sea.
文摘The hypocentral depths of more than 200 Chinese earthquakes, of magnitudes from M 8.6 to M 3.0, are calculated from macroseismic data carried on earthquake catalogs, by using the formula for macroseismic hypocentral depths and the formula for general solution of macroseismic hypocentral depths. The results are plotted on maps to show their geographical distribution. It can be seen that most Chinese earthquakes are shollow ones. Of the 200 earthquakes calculated, 162(81.0%) hypocenters are shallower than 9 km, of which 111 (55.5%) hypocenters are shallower than 5 km. Such shallow earthquakes are mostly distributed in the provinces near to the North South Earthquake Belt, while the rest are scattered in the other provinces(except Zhejiang province). Earthquakes of medium(between 10 and 20 km) depth are relatively few (32 in number, 15.0%); they are distributed along the North South Earthquake Belt, and the western part of Xinjiang Uygur Autonomous Region and in provinces Shaanxi, Shanxi and Shandong (along the Tanlu Fracture Zone, crossing the sea to northeast China). Deep earthquakes are rare, being scattered in south Yunnan and the east end of Inner Mongolia Uygur Autonomous Region.
基金Meteorological Research in the Public Interest,No.GYHY201106014Beijing Nova Program,No.2010B037China Special Fund for the National High Technology Research and Development Program of China(863 Program),No.412230
文摘Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with SD measurements from in situ observations and passive microwave remote sensing of Advanced Microwave Scanning Radiometer-EOS （AMSR-E） and snow cover measurements of the Interactive Multisensor Snow and Ice Mapping System （IMS）. AMSR-E SD at 25 km spatial resolution was retrieved from AMSR-E products of snow density and snow water equivalent and then corrected using the SD from in situ observations and IMS snow cover. Corrected AMSR-E SD images were then resampled to act as ＂virtual＂ in situ observations to combine with the real in situ observations to interpolate at 4 km spatial resolution SD using the Cressman method. Finally, daily SD data generation for several regions of China demonstrated that the method is well suited to the generation of higher spatial resolution SD data in regions with a lower Digital Elevation Model （DEM） but not so well suited to regions at high altitude and with an undulating terrain, such as the Tibetan Plateau. Analysis of the longer time period SD data generation for January between 2003 and 2010 in northern Xinjiang also demonstrated the feasibility of the method.
