Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,u...Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,uni-axial quasi-static and dynamic tensile tests at strain rates of 10^(-4),1,10,100,and 250 s^(-1)were carried out.In order to investigate the influence of stress state on the deformation and fracture parameters,specimens with various geometries were used in the experiments.Stress strain curves and fracture strains of the GJS-450 alloy in the strain rate range of 10^(-4)to 250 s^(-1)were obtained.A strain rate-dependent plastic flow model was proposed to describe the mechanical behavior in the corresponding strain-rate range.The available damage model was extended to take the strain rate into account and calibrated based on the analysis of local fracture strains.Simulations with the proposed plastic flow model and the damage model were conducted to observe the deformation and fracture process.The results show that the strain rate has obviously nonlinear effects on the yield stress and fracture strain of GJS-450 alloys.The predictions with the proposed plastic flow and damage models at various strain rates agree well with the experimental results,which illustrates that the rate-dependent plastic flow and damage models can be used to describe the mechanical behavior of cast iron alloys at elevated strain rates.The proposed plastic flow and damage models can be used to describe the deformation and fracture analysis of materials with similar properties.展开更多
Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock se...Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.展开更多
The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit dia...The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit diagram(FFLD)was transformed into a stress-based(σ-FFLD)and effective plastic strain(EPS)vs triaxiality(η)plot to remove the excess dependency of fracture limits over the strains.For the prediction of fracture limits,seven different damage models were calibrated.The Oh model displayed the best ability to predict the fracture locus with the least absolute error.Though the experimentally obtained fracture limits have only been used for the numerical analysis,none of the considered damage models predicted the fracture strains over the entire considered range of stress triaxiality(0.33<η<0.66).The deep drawing process window helped to determine wrinkling,safe and fracture zones while drawing the cylindrical cups under different temperature and lubricating conditions.Further,the highest drawing ratio of 2 was achieved at 673 K under the lubricating condition.All the numerically predicted results of both stretch forming and deep drawing processes using the Hill 1948 anisotropic yielding function were found to be good within the acceptable range of error.展开更多
Non aqueous reactive polymer materials produced by the reaction of isocyanate and polyol have been widely used in infrastructure construction,which may be subjected to explosion loads during complex service conditions...Non aqueous reactive polymer materials produced by the reaction of isocyanate and polyol have been widely used in infrastructure construction,which may be subjected to explosion loads during complex service conditions.The blast response of composite materials is a crucial aspect for applications in engineering structures potentially subjected to extreme loadings.In this work,damage caused to rebar reinforced polymer slabs by surface explosive charges was studied experimentally and numerically.A total of 6 field tests were carried out to investigate the performances of the failure modes of rebar reinforced polymer slabs under contact and near-field explosions.The influence of explosive quantity(10-40 g)and stand-off distances(0-20 cm)at the damage modes were studied.The results show that the failure modes of rebar reinforced polymer slabs under near-field explosion mainly were bending and surface spalling,while under the impact of contact explosion,the failure modes were craters of the top surface,spalling of the bottom surface,and middle perforation.Furthermore,a detailed fully coupled model was developed and validated with the test data.The influences of explosive quantity and slab thickness on rebar reinforced polymer slabs under contact explosion were studied.Based on this,the calculation formula between breach diameter,explosive quantity,and slab thickness is fitted.展开更多
Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative id...Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.展开更多
Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature ...Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature treatment were conducted with a ϕ75 mm split Hopkinson tension bar (SHTB) to investigate the mesoscopic fracture and damage properties of rock. An improved scanning electron microscopy (SEM) experimental method was used to analyze the tensile fracture surfaces of rock samples. Qualitative and quantitative analyses were performed to assess evolution of mesoscopic damage of heat-damaged rock under tensile loading. A constitutive model describing the mesoscopic fractal damage under thermo-mechanical coupling was established. The results showed that the high temperatures significantly reduced the tensile strength and fracture surface roughness of the red sandstone. The three-dimensional (3D) reconstruction of the fracture surface of the samples that experienced tensile failure at 900 °C showed a flat surface. The standard deviation of elevation and slope angle of specimen fracture surface first increased and then decreased with increasing temperature. The threshold for brittle fracture of the heat-damaged red sandstone specimens was 600 °C. Beyond this threshold temperature, local ductile fracture occurred, resulting in plastic deformation of the fracture surface during tensile fracturing. With increase of temperature, the internal meso-structure of samples was strengthened slightly at first and then deteriorated gradually, which was consistent with the change of macroscopic mechanical properties of red sandstone. The mesoscopic characteristics, such as the number, mean side length, maximum area, porosity, and fractal dimension of crack, exhibited an initial decline, followed by a gradual increase. The development of microcracks in samples had significant influence on mesoscopic fractal dimension. The mesoscopic fractal characteristics were used to establish a mesoscopic fractal damage constitutive model for red sandstone, and the agreement between the theoretical and experimental results validated the proposed model.展开更多
Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelas...Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.展开更多
The trade-off between mechanistic interpretability,operational convenience,and predictive accuracy is challenging for predicting the lifetime of lithium-ion batteries.To resolve this contradiction,we propose a damage ...The trade-off between mechanistic interpretability,operational convenience,and predictive accuracy is challenging for predicting the lifetime of lithium-ion batteries.To resolve this contradiction,we propose a damage model based on fatigue damage theory and electrochemical impedance spectroscopy.The causal relationship of“fatigue damage→resistance increase→capacity fading”is revealed to describe the underlying mechanism.Charge transfer resistance is chosen as the variable to ensure the convenience of data acquisition.To verify the accuracy of the model,the electrochemical impedance spectrum and capacity of a graphene-coated silicon electrode at two charging rates are collected and analyzed.50% and 75% of the measured data are utilized as inputs to compare the prediction capabilities of the proposed damage model and the existing empirical model.The particle filter algorithm is adopted to train the parameters of both models.The maximum prediction error of the damage model is less than 3%,showing better prediction accuracy and medium-term prediction stability than the empirical model.Our work demonstrates that the proposed damage model is an effective way to resolve contradictions in lifetime prediction.展开更多
A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing m...A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.展开更多
Cemented tailings backfill(CTB)is a crucial support material for ensuring the long-term stability of underground goafs.A comprehensive understanding of its compressive mechanical behavior is essential for improving en...Cemented tailings backfill(CTB)is a crucial support material for ensuring the long-term stability of underground goafs.A comprehensive understanding of its compressive mechanical behavior is essential for improving engineering safety.Although extensive studies have been conducted on the uniaxial compressive properties of CTB,damage constitutive models that effectively capture its damage evolution process remain underdeveloped,and its failure mechanisms are not yet fully clarified.To address these gaps,this study conducted systematic uniaxial compression tests on CTB specimens prepared with varying cement-tailings ratios.The results revealed distinct compaction and softening phases in the stress−strain curves.A lower cement-tailings ratio significantly reduced the strength and deformation resistance of CTB,along with a decrease in elastic energy accumulation at peak stress and dissipation energy in the post peak stage.Based on these findings,a modified damage constitutive model was developed by introducing a correction factor,enabling accurate simulation of the entire uniaxial compression process of CTB with different cement-tailings ratios.Comparative analysis with classical constitutive models validated the proposed model’s accuracy and applicability in describing the compressive behavior of CTB.Furthermore,particle size distribution and acoustic emission tests were employed to investigate the influence of cement-tailings ratio on failure mechanisms.The results indicated that a lower cement-tailings ratio leads to coarser particle sizes,which intensify shear-related acoustic emission signals and ultimately result in more pronounced macroscopic shear failure.This study provides theoretical support and practical guidance for the optimal design of CTB mix ratios.展开更多
Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a ...Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a statistical damage constitutive model and energy evolution mechanisms.Initially,integrating the principle of effective stress and the Hoek-Brown criterion,a statistical damage constitutive model for gas-bearing coal is established and validated through triaxial compression tests under different gas pressures to verify its accuracy and applicability.Subsequently,employing energy evolution mechanism,two energy characteristic parameters(elastic energy proportion and dissipated energy proportion)are analyzed.Based on the damage stress thresholds,the damage evolution characteristics of gas bearing coal were explored.Finally,by integrating energy characteristic parameters with damage parameters,a novel brittleness index is proposed.The results demonstrate that the theoretical curves derived from the statistical damage constitutive model closely align with the test curves,accurately reflecting the stress−strain characteristics of gas-bearing coal and revealing the stress drop and softening characteristics of coal in the post-peak stage.The shape parameter and scale parameter represent the brittleness and macroscopic strength of the coal,respectively.As gas pressure increases from 1 to 5 MPa,the shape parameter and the scale parameter decrease by 22.18%and 60.45%,respectively,indicating a reduction in both brittleness and strength of the coal.Parameters such as maximum damage rate and peak elastic energy storage limit positively correlate with coal brittleness.The brittleness index effectively captures the brittleness characteristics and reveals a decrease in brittleness and an increase in sensitivity to plastic deformation under higher gas pressure conditions.展开更多
Gas storage in abandoned mines is one way to reuse waste space resources.The surrounding rock of gas storage reservoirs in underground roadways undergoes damage and deformation under the cyclic loading of gas charging...Gas storage in abandoned mines is one way to reuse waste space resources.The surrounding rock of gas storage reservoirs in underground roadways undergoes damage and deformation under the cyclic loading of gas charging and discharging,which can pose a risk to the safety of the reservoirs.This study establishes a true triaxial numerical model of rock mass with the discrete element method(DEM)and explores the crack evolution of surrounding rock of underground gas storage during cyclic loading and unloading.Also,a damage evolution model in numerical analysis considering residual deformation is developed to explain the experimental results.As was revealed,cyclic loading and unloading resulted in fatigue damage in the specimen and caused strength deterioration of the specimen.During the loading process,the uniformly distributed force chains of the rock mass redistributed,evolving gradually to mostly transverse force chains.This contributed to the appearance of blank areas in the force chains when through cracks appear.The ratio of tensile cracks to shear cracks gradually decreases and finally stabilizes at 7:1.The damage evolution model considering residual strain can be mutually verified with the numerical simulation results.Based on the DEM model,it was found that there was a certain threshold of confining pressure.When the confining pressure exceeded 30 MPa,the deformation to ductility of sandstone samples began to accelerate,with a greater residual strength.This study provides a theoretical basis for analyzing the long-term mechanical behavior of surrounding rock of gas storage in abandoned mines.展开更多
The paper is to design and construct a coupled elasto-plasticity damage constitutive model for concrete.Based on the energy dissipation principle,the Hsieh-Ting-Chen four-parameter yield function is used.The model can...The paper is to design and construct a coupled elasto-plasticity damage constitutive model for concrete.Based on the energy dissipation principle,the Hsieh-Ting-Chen four-parameter yield function is used.The model can reflect different strength characteristics of concrete in tension and compression,and reduce the limitation and lacuna of the traditional damage constitutive models for concrete.Furthermore,numerical test for concrete stress-strain relation under uniaxial tension and compression is given.Moreover,the damage process of concrete gravity dam is calculated and analyzed in seismic load.Compared with other damage constitutive models,the proposed model contains only one unknown parameter and the other parameters can be found in the Hsieh-Ting-Chen four-parameter yield function.The same damage evolution law,which is used for tension and compression,is good for determining stress-strain constitutive and damage characteristics in complex stress state.This coupled damage constitutive models can be applied in analyzing damage of concrete gravity dam and arch dam.展开更多
A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in pol...A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rockand allow for numerical replication of crack damage progression through initiation and propagation ofmicro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the pastfor brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi modelshas limited its application to two-dimensional （2D） codes. The proposed approach is implemented inNeper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files thatcan be read directly into 3DEC. A series of Unconfined Compressive Strength （UCS） tests are simulated in3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate therelationship between each micro-parameter and the model＇s macro-response. The possibility of numericalreplication of the classical U-shape strength curve for anisotropic rocks is also investigated innumerical UCS tests by using complex-shaped （elongated） grains that are cemented to one another alongtheir adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models foraccurate replication of the mechanical behaviour of isotropic and anisotropic （containing a fabric） rocks. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
This paper developed a statistical damage constitutive model for deep rock by considering the effects of external load and thermal treatment temperature based on the distortion energy.The model parameters were determi...This paper developed a statistical damage constitutive model for deep rock by considering the effects of external load and thermal treatment temperature based on the distortion energy.The model parameters were determined through the extremum features of stress−strain curve.Subsequently,the model predictions were compared with experimental results of marble samples.It is found that when the treatment temperature rises,the coupling damage evolution curve shows an S-shape and the slope of ascending branch gradually decreases during the coupling damage evolution process.At a constant temperature,confining pressure can suppress the expansion of micro-fractures.As the confining pressure increases the rock exhibits ductility characteristics,and the shape of coupling damage curve changes from an S-shape into a quasi-parabolic shape.This model can well characterize the influence of high temperature on the mechanical properties of deep rock and its brittleness-ductility transition characteristics under confining pressure.Also,it is suitable for sandstone and granite,especially in predicting the pre-peak stage and peak stress of stress−strain curve under the coupling action of confining pressure and high temperature.The relevant results can provide a reference for further research on the constitutive relationship of rock-like materials and their engineering applications.展开更多
The oxide dispersion strengthening(ODS)high entropy alloy(HEA)exhibits the high elevated temperature performance and radiation resistance due to severe atomic lattice distortion and oxide particles dispersed in matrix...The oxide dispersion strengthening(ODS)high entropy alloy(HEA)exhibits the high elevated temperature performance and radiation resistance due to severe atomic lattice distortion and oxide particles dispersed in matrix,which is expected to become the most promising structural material in the next generation of nuclear energy systems.However,microstructure and damage evolution of irradiated ODS HEA under loading remain elusive at submicron scale using the existing simulations owing to a lack of atomic-lattice-distortion information from a micromechanics description.Here,the random field theory informed discrete dislocation dynamics simulations based on the results of high-resolution transmission electron microscopy are developed to study the dislocation behavior and damage evolution in ODS HEA considering the influence of severe lattice distortion and nanoscale oxide particle.Noteworthy,the damage behavior shows an unusual trend of the decreasing-to-increasing transition with the continuous loading process.There are two main types of damage micromechanics generated in irradiated ODS HEA:the dislocation loop damage in which the damage is controlled by irradiation-induced dislocation loops and their evolution,the strain localization damage in which the damage comes from the dislocation multiplication in the local plastic region.The oxide particle hinders the dislocation movement in the main slip plane,and the lattice distortion induces the dislocation sliding to the secondary slip plane,which promotes the dislocation cross-slip and dislocation loop annihilation,and thus reduces the material damage in the elastic damage stage.These findings can deeply understand atomic-scale damage mechanism and guide the design of ODS HEA with high radiation resistance.展开更多
The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and f...The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and failure mechanism of Xiyu conglomerate collected from Momoke Water Control Project,southwestern China,were analyzed and discussed based on the experimental results of triaxial compression test and 3D X-ray computed tomography test.The results show that with increasing confining pressure,the deformation characteristics and all characteristic stresses increase monotonically,while the dilation angle and dilatancy index decrease,and exponential function model can accurately describe the evolution rule of dilatancy index with confining pressure.While the porosity is negatively correlated with confining pressure.The failure modes of Xiyu conglomerate include axial tensile cracks,shear cracks,local cross cracks and cracks around gravel.With increasing confining pressure,the failure modes transform from tension cracks to shear cracks.A non-associated micromechanical damage model considering pressure dependent matrix presenting tension-compression asymmetry is proposed and applied to Xiyu conglomerate with pores and a large number of gravels.By comparing numerical calculations and experimental results,the proposed micromechanical plastic damage model is able to describe the mechanical behavior of Xiyu conglomerate.展开更多
Slope stability analysis is a classical mechanical problem in geotechnical engineering and engineering geology.It is of great significance to study the stability evolution of expansive soil slopes for engineering cons...Slope stability analysis is a classical mechanical problem in geotechnical engineering and engineering geology.It is of great significance to study the stability evolution of expansive soil slopes for engineering construction in expansive soil areas.Most of the existing studies evaluate the slope stability by analyzing the limit equilibrium state of the slope,and the analysis method for the stability evolution considering the damage softening of the shear zone is lacking.In this study,the large deformation shear mechanical behavior of expansive soil was investigated by ring shear test.The damage softening characteristic of expansive soil in the shear zone was analyzed,and a shear damage model reflecting the damage softening behavior of expansive soil was derived based on the damage theory.Finally,by skillfully combining the vector sum method and the shear damage model,an analysis method for the stability evolution of the expansive soil slope considering the shear zone damage softening was proposed.The results show that the shear zone subjected to large displacement shear deformation exhibits an obvious damage softening phenomenon.The damage variable equation based on the logistic function can be well used to describe the shear damage characteristics of expansive soil,and the proposed shear damage model is in good agreement with the ring shear test results.The vector sum method considering the damage softening behavior of the shear zone can be well applied to analyze the stability evolution characteristics of the expansive soil slope.The stability factor of the expansive soil slope decreases with the increase of shear displacement,showing an obvious progressive failure behavior.展开更多
In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furt...In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furthermore,the evolution of microstructural characteristics and sintering-induced mechanical properties were separately obtained by the field emission scanning electron microscope(FE-SEM)and nanoindenter,providing inputs for damage modeling.Meanwhile,the critical compressive strain of TBCs at room temperature was acquired using 3D digital image correlation(3D-DIC)technology to characterize the interfacial damage combined with the experimentally observed buckling modes.The re-sults demonstrate that not only does oxidative damage exist in the TBCs system due to thermally grown oxide(TGO)growth,but additional damage is generated by thermal cycling and sintering behavior,re-spectively.Then,a nonlinear cumulative interfacial damage model considering multiple failure factors is developed to predict TBCs’life.The error between the measured damage and calculated damage is less than 15%,showing good prediction accuracy.展开更多
As one of the most common occurring geological landforms in deep rock formations, the dynamic mechanical properties of layered composite rock bodies under impact loading have been widely studied by scholars. To study ...As one of the most common occurring geological landforms in deep rock formations, the dynamic mechanical properties of layered composite rock bodies under impact loading have been widely studied by scholars. To study the dynamic properties of soft and hard composite rocks with different thickness ratios, this paper utilizes cement, quartz sand and gypsum powder to construct soft and hard composite rock specimens and utilizes a combination of indoor tests, numerical calculations, and theoretical analyses to investigate the mechanical properties of soft and hard composite rock bodies. The test results reveal that:(1) When the proportion of hard rock increases from 20% to 50%, the strength of the combined rock body increases by 69.14 MPa and 87 MPa when the hard rock face and soft rock face are loaded, respectively;however, when the proportion of hard rock is the same, the compressive strength of the hard rock face impact is 9%-17% greater than that of the soft rock face impact;(2) When a specimen of soft and hard combined rock body is subjected to impact loading, the damage mode involves mixed tension and shear damage, and the cracks generally first appear at the ends of the specimen, then develop on the laminar surface from the impact surface, and finally end in the overall damage of the soft rock part. The development rate and the total number of cracks in the same specimen when the hard rock face is impacted are significantly greater than those when the soft rock face is impacted;(3) By introducing Weibull’s statistical strength theory to establish the damage variables of soft-hard combined rock bodies, combined with the DP strength criterion, the damage model and the Kelvin body are concatenated to obtain a statistical damage constitutive model, which can better fit the full stress-strain curve of soft-hard combined rock body specimens under a single impact load.展开更多
基金Supported by National Natural Science Foundation of China (Grant Nos.12202205,U1730101)the Federal Ministry of Economic Affairs and Energy (BMWi)via the German Federation of Industrial Research Associations‘Otto von Guericke’e.V. (AiF) (IGF-Nr.19567N)Forschungsvereinigung Automobiltechnik e.V. (FAT)。
文摘Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,uni-axial quasi-static and dynamic tensile tests at strain rates of 10^(-4),1,10,100,and 250 s^(-1)were carried out.In order to investigate the influence of stress state on the deformation and fracture parameters,specimens with various geometries were used in the experiments.Stress strain curves and fracture strains of the GJS-450 alloy in the strain rate range of 10^(-4)to 250 s^(-1)were obtained.A strain rate-dependent plastic flow model was proposed to describe the mechanical behavior in the corresponding strain-rate range.The available damage model was extended to take the strain rate into account and calibrated based on the analysis of local fracture strains.Simulations with the proposed plastic flow model and the damage model were conducted to observe the deformation and fracture process.The results show that the strain rate has obviously nonlinear effects on the yield stress and fracture strain of GJS-450 alloys.The predictions with the proposed plastic flow and damage models at various strain rates agree well with the experimental results,which illustrates that the rate-dependent plastic flow and damage models can be used to describe the mechanical behavior of cast iron alloys at elevated strain rates.The proposed plastic flow and damage models can be used to describe the deformation and fracture analysis of materials with similar properties.
基金funded by the National Natural Science Foundation of China(Grant Nos.51578543)。
文摘Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.
基金Science and Engineering Research Board,Government of India(ECR/2016/001402)BITS-Pilani,Hyderabad Campus。
文摘The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit diagram(FFLD)was transformed into a stress-based(σ-FFLD)and effective plastic strain(EPS)vs triaxiality(η)plot to remove the excess dependency of fracture limits over the strains.For the prediction of fracture limits,seven different damage models were calibrated.The Oh model displayed the best ability to predict the fracture locus with the least absolute error.Though the experimentally obtained fracture limits have only been used for the numerical analysis,none of the considered damage models predicted the fracture strains over the entire considered range of stress triaxiality(0.33<η<0.66).The deep drawing process window helped to determine wrinkling,safe and fracture zones while drawing the cylindrical cups under different temperature and lubricating conditions.Further,the highest drawing ratio of 2 was achieved at 673 K under the lubricating condition.All the numerically predicted results of both stretch forming and deep drawing processes using the Hill 1948 anisotropic yielding function were found to be good within the acceptable range of error.
基金supported by the National Natural Science Foundation of China(Grant Nos.52009126,51939008)Foundation of Hubei Key Laboratory of Blasting Engineering(Grant No.BL202104)First-class Project Special Funding of Yellow River Laboratory(No.YRL22IR08)。
文摘Non aqueous reactive polymer materials produced by the reaction of isocyanate and polyol have been widely used in infrastructure construction,which may be subjected to explosion loads during complex service conditions.The blast response of composite materials is a crucial aspect for applications in engineering structures potentially subjected to extreme loadings.In this work,damage caused to rebar reinforced polymer slabs by surface explosive charges was studied experimentally and numerically.A total of 6 field tests were carried out to investigate the performances of the failure modes of rebar reinforced polymer slabs under contact and near-field explosions.The influence of explosive quantity(10-40 g)and stand-off distances(0-20 cm)at the damage modes were studied.The results show that the failure modes of rebar reinforced polymer slabs under near-field explosion mainly were bending and surface spalling,while under the impact of contact explosion,the failure modes were craters of the top surface,spalling of the bottom surface,and middle perforation.Furthermore,a detailed fully coupled model was developed and validated with the test data.The influences of explosive quantity and slab thickness on rebar reinforced polymer slabs under contact explosion were studied.Based on this,the calculation formula between breach diameter,explosive quantity,and slab thickness is fitted.
基金Projects(2021RC3007,2020RC3090)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProjects(52374150,52174099)supported by the National Natural Science Foundation of China。
文摘Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.
基金supported by The National Natural Science Foundation of China(Grant Nos.12272411 and 42007259).
文摘Understanding the mesoscopic tensile fracture damage of rock is the basis of evaluating the deterioration process of mechanical properties of heat-damaged rock. For this, tensile tests of rocks under high-temperature treatment were conducted with a ϕ75 mm split Hopkinson tension bar (SHTB) to investigate the mesoscopic fracture and damage properties of rock. An improved scanning electron microscopy (SEM) experimental method was used to analyze the tensile fracture surfaces of rock samples. Qualitative and quantitative analyses were performed to assess evolution of mesoscopic damage of heat-damaged rock under tensile loading. A constitutive model describing the mesoscopic fractal damage under thermo-mechanical coupling was established. The results showed that the high temperatures significantly reduced the tensile strength and fracture surface roughness of the red sandstone. The three-dimensional (3D) reconstruction of the fracture surface of the samples that experienced tensile failure at 900 °C showed a flat surface. The standard deviation of elevation and slope angle of specimen fracture surface first increased and then decreased with increasing temperature. The threshold for brittle fracture of the heat-damaged red sandstone specimens was 600 °C. Beyond this threshold temperature, local ductile fracture occurred, resulting in plastic deformation of the fracture surface during tensile fracturing. With increase of temperature, the internal meso-structure of samples was strengthened slightly at first and then deteriorated gradually, which was consistent with the change of macroscopic mechanical properties of red sandstone. The mesoscopic characteristics, such as the number, mean side length, maximum area, porosity, and fractal dimension of crack, exhibited an initial decline, followed by a gradual increase. The development of microcracks in samples had significant influence on mesoscopic fractal dimension. The mesoscopic fractal characteristics were used to establish a mesoscopic fractal damage constitutive model for red sandstone, and the agreement between the theoretical and experimental results validated the proposed model.
基金supported by the China Scholarship Council Program(Grant No.202008320274)it is also supported by Technical University of Munich.
文摘Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.
基金supported by the National Natural Science Foundation of China(12021002,12472183,and 12041201).
文摘The trade-off between mechanistic interpretability,operational convenience,and predictive accuracy is challenging for predicting the lifetime of lithium-ion batteries.To resolve this contradiction,we propose a damage model based on fatigue damage theory and electrochemical impedance spectroscopy.The causal relationship of“fatigue damage→resistance increase→capacity fading”is revealed to describe the underlying mechanism.Charge transfer resistance is chosen as the variable to ensure the convenience of data acquisition.To verify the accuracy of the model,the electrochemical impedance spectrum and capacity of a graphene-coated silicon electrode at two charging rates are collected and analyzed.50% and 75% of the measured data are utilized as inputs to compare the prediction capabilities of the proposed damage model and the existing empirical model.The particle filter algorithm is adopted to train the parameters of both models.The maximum prediction error of the damage model is less than 3%,showing better prediction accuracy and medium-term prediction stability than the empirical model.Our work demonstrates that the proposed damage model is an effective way to resolve contradictions in lifetime prediction.
基金supported by the Independent Innovation Research Program of China University of Petroleum(East China)(No.27RA2215005)。
文摘A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.
基金Project(52374153)supported by the National Natural Science Foundation of ChinaProject(kq2502150)supported by the Natural Science Foundation of Changsha,China。
文摘Cemented tailings backfill(CTB)is a crucial support material for ensuring the long-term stability of underground goafs.A comprehensive understanding of its compressive mechanical behavior is essential for improving engineering safety.Although extensive studies have been conducted on the uniaxial compressive properties of CTB,damage constitutive models that effectively capture its damage evolution process remain underdeveloped,and its failure mechanisms are not yet fully clarified.To address these gaps,this study conducted systematic uniaxial compression tests on CTB specimens prepared with varying cement-tailings ratios.The results revealed distinct compaction and softening phases in the stress−strain curves.A lower cement-tailings ratio significantly reduced the strength and deformation resistance of CTB,along with a decrease in elastic energy accumulation at peak stress and dissipation energy in the post peak stage.Based on these findings,a modified damage constitutive model was developed by introducing a correction factor,enabling accurate simulation of the entire uniaxial compression process of CTB with different cement-tailings ratios.Comparative analysis with classical constitutive models validated the proposed model’s accuracy and applicability in describing the compressive behavior of CTB.Furthermore,particle size distribution and acoustic emission tests were employed to investigate the influence of cement-tailings ratio on failure mechanisms.The results indicated that a lower cement-tailings ratio leads to coarser particle sizes,which intensify shear-related acoustic emission signals and ultimately result in more pronounced macroscopic shear failure.This study provides theoretical support and practical guidance for the optimal design of CTB mix ratios.
基金Project(52274096)supported by the National Natural Science Foundation of ChinaProject(WS2023A03)supported by the State Key Laboratory Cultivation Base for Gas Geology and Gas Control,China。
文摘Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a statistical damage constitutive model and energy evolution mechanisms.Initially,integrating the principle of effective stress and the Hoek-Brown criterion,a statistical damage constitutive model for gas-bearing coal is established and validated through triaxial compression tests under different gas pressures to verify its accuracy and applicability.Subsequently,employing energy evolution mechanism,two energy characteristic parameters(elastic energy proportion and dissipated energy proportion)are analyzed.Based on the damage stress thresholds,the damage evolution characteristics of gas bearing coal were explored.Finally,by integrating energy characteristic parameters with damage parameters,a novel brittleness index is proposed.The results demonstrate that the theoretical curves derived from the statistical damage constitutive model closely align with the test curves,accurately reflecting the stress−strain characteristics of gas-bearing coal and revealing the stress drop and softening characteristics of coal in the post-peak stage.The shape parameter and scale parameter represent the brittleness and macroscopic strength of the coal,respectively.As gas pressure increases from 1 to 5 MPa,the shape parameter and the scale parameter decrease by 22.18%and 60.45%,respectively,indicating a reduction in both brittleness and strength of the coal.Parameters such as maximum damage rate and peak elastic energy storage limit positively correlate with coal brittleness.The brittleness index effectively captures the brittleness characteristics and reveals a decrease in brittleness and an increase in sensitivity to plastic deformation under higher gas pressure conditions.
基金National Natural Science Foundation of China,Grant/Award Numbers:U22A20598,52104107National Key Research and Development Program of China,Grant/Award Numbers:2023YFC2907300,2019YFE0118500,2019YFC1904304Natural Science Foundation of Jiangsu Province,Grant/Award Number:BK20200634。
文摘Gas storage in abandoned mines is one way to reuse waste space resources.The surrounding rock of gas storage reservoirs in underground roadways undergoes damage and deformation under the cyclic loading of gas charging and discharging,which can pose a risk to the safety of the reservoirs.This study establishes a true triaxial numerical model of rock mass with the discrete element method(DEM)and explores the crack evolution of surrounding rock of underground gas storage during cyclic loading and unloading.Also,a damage evolution model in numerical analysis considering residual deformation is developed to explain the experimental results.As was revealed,cyclic loading and unloading resulted in fatigue damage in the specimen and caused strength deterioration of the specimen.During the loading process,the uniformly distributed force chains of the rock mass redistributed,evolving gradually to mostly transverse force chains.This contributed to the appearance of blank areas in the force chains when through cracks appear.The ratio of tensile cracks to shear cracks gradually decreases and finally stabilizes at 7:1.The damage evolution model considering residual strain can be mutually verified with the numerical simulation results.Based on the DEM model,it was found that there was a certain threshold of confining pressure.When the confining pressure exceeded 30 MPa,the deformation to ductility of sandstone samples began to accelerate,with a greater residual strength.This study provides a theoretical basis for analyzing the long-term mechanical behavior of surrounding rock of gas storage in abandoned mines.
基金Project supported by the National Natural Science Foundation of China(Nos.51109029,51178081,51138001 and 51009020)the China Postdoctoral Science Foundation(No.20110491535)the State Key Development Program for Basic Research of China (No.2013CB035905)
文摘The paper is to design and construct a coupled elasto-plasticity damage constitutive model for concrete.Based on the energy dissipation principle,the Hsieh-Ting-Chen four-parameter yield function is used.The model can reflect different strength characteristics of concrete in tension and compression,and reduce the limitation and lacuna of the traditional damage constitutive models for concrete.Furthermore,numerical test for concrete stress-strain relation under uniaxial tension and compression is given.Moreover,the damage process of concrete gravity dam is calculated and analyzed in seismic load.Compared with other damage constitutive models,the proposed model contains only one unknown parameter and the other parameters can be found in the Hsieh-Ting-Chen four-parameter yield function.The same damage evolution law,which is used for tension and compression,is good for determining stress-strain constitutive and damage characteristics in complex stress state.This coupled damage constitutive models can be applied in analyzing damage of concrete gravity dam and arch dam.
文摘A grain-based distinct element model featuring three-dimensional （3D） Voronoi tessellations （randompoly-crystals） is proposed for simulation of crack damage development in brittle rocks. The grainboundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rockand allow for numerical replication of crack damage progression through initiation and propagation ofmicro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the pastfor brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi modelshas limited its application to two-dimensional （2D） codes. The proposed approach is implemented inNeper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files thatcan be read directly into 3DEC. A series of Unconfined Compressive Strength （UCS） tests are simulated in3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate therelationship between each micro-parameter and the model＇s macro-response. The possibility of numericalreplication of the classical U-shape strength curve for anisotropic rocks is also investigated innumerical UCS tests by using complex-shaped （elongated） grains that are cemented to one another alongtheir adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models foraccurate replication of the mechanical behaviour of isotropic and anisotropic （containing a fabric） rocks. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
基金Project(11272119)supported by the National Natural Science Foundation of China。
文摘This paper developed a statistical damage constitutive model for deep rock by considering the effects of external load and thermal treatment temperature based on the distortion energy.The model parameters were determined through the extremum features of stress−strain curve.Subsequently,the model predictions were compared with experimental results of marble samples.It is found that when the treatment temperature rises,the coupling damage evolution curve shows an S-shape and the slope of ascending branch gradually decreases during the coupling damage evolution process.At a constant temperature,confining pressure can suppress the expansion of micro-fractures.As the confining pressure increases the rock exhibits ductility characteristics,and the shape of coupling damage curve changes from an S-shape into a quasi-parabolic shape.This model can well characterize the influence of high temperature on the mechanical properties of deep rock and its brittleness-ductility transition characteristics under confining pressure.Also,it is suitable for sandstone and granite,especially in predicting the pre-peak stage and peak stress of stress−strain curve under the coupling action of confining pressure and high temperature.The relevant results can provide a reference for further research on the constitutive relationship of rock-like materials and their engineering applications.
基金support from the National Natural Science Foundation of China(Nos.U2267252,12372069,12302083,and 12172123)the China Postdoctoral Sci-ence Foundation(No.2023M731061)+2 种基金the Natural Science Founda-tion of Hunan Province(No.2022JJ20001)the Hunan Provin-cial Innovation Foundation for Postgraduate(No.CX20220378)support from the National Science Foundation(Nos.DMR-1611180,1809640,and 2226508).
文摘The oxide dispersion strengthening(ODS)high entropy alloy(HEA)exhibits the high elevated temperature performance and radiation resistance due to severe atomic lattice distortion and oxide particles dispersed in matrix,which is expected to become the most promising structural material in the next generation of nuclear energy systems.However,microstructure and damage evolution of irradiated ODS HEA under loading remain elusive at submicron scale using the existing simulations owing to a lack of atomic-lattice-distortion information from a micromechanics description.Here,the random field theory informed discrete dislocation dynamics simulations based on the results of high-resolution transmission electron microscopy are developed to study the dislocation behavior and damage evolution in ODS HEA considering the influence of severe lattice distortion and nanoscale oxide particle.Noteworthy,the damage behavior shows an unusual trend of the decreasing-to-increasing transition with the continuous loading process.There are two main types of damage micromechanics generated in irradiated ODS HEA:the dislocation loop damage in which the damage is controlled by irradiation-induced dislocation loops and their evolution,the strain localization damage in which the damage comes from the dislocation multiplication in the local plastic region.The oxide particle hinders the dislocation movement in the main slip plane,and the lattice distortion induces the dislocation sliding to the secondary slip plane,which promotes the dislocation cross-slip and dislocation loop annihilation,and thus reduces the material damage in the elastic damage stage.These findings can deeply understand atomic-scale damage mechanism and guide the design of ODS HEA with high radiation resistance.
基金supported by National Natural Science Foundation of China(Nos.12102129 and 12072102)the Water Science and Technology Special Fund of Xinjiang Uygur Autonomous Region(No.XSKJ-2023-30)+1 种基金the Central University Basic Research Fund of China(Nos.B220202014 and B230201059)the Key Laboratory of Safe Mining of Deep Metal Mines,Ministry of Education(No.DM2022B01)。
文摘The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and failure mechanism of Xiyu conglomerate collected from Momoke Water Control Project,southwestern China,were analyzed and discussed based on the experimental results of triaxial compression test and 3D X-ray computed tomography test.The results show that with increasing confining pressure,the deformation characteristics and all characteristic stresses increase monotonically,while the dilation angle and dilatancy index decrease,and exponential function model can accurately describe the evolution rule of dilatancy index with confining pressure.While the porosity is negatively correlated with confining pressure.The failure modes of Xiyu conglomerate include axial tensile cracks,shear cracks,local cross cracks and cracks around gravel.With increasing confining pressure,the failure modes transform from tension cracks to shear cracks.A non-associated micromechanical damage model considering pressure dependent matrix presenting tension-compression asymmetry is proposed and applied to Xiyu conglomerate with pores and a large number of gravels.By comparing numerical calculations and experimental results,the proposed micromechanical plastic damage model is able to describe the mechanical behavior of Xiyu conglomerate.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFC1509901).
文摘Slope stability analysis is a classical mechanical problem in geotechnical engineering and engineering geology.It is of great significance to study the stability evolution of expansive soil slopes for engineering construction in expansive soil areas.Most of the existing studies evaluate the slope stability by analyzing the limit equilibrium state of the slope,and the analysis method for the stability evolution considering the damage softening of the shear zone is lacking.In this study,the large deformation shear mechanical behavior of expansive soil was investigated by ring shear test.The damage softening characteristic of expansive soil in the shear zone was analyzed,and a shear damage model reflecting the damage softening behavior of expansive soil was derived based on the damage theory.Finally,by skillfully combining the vector sum method and the shear damage model,an analysis method for the stability evolution of the expansive soil slope considering the shear zone damage softening was proposed.The results show that the shear zone subjected to large displacement shear deformation exhibits an obvious damage softening phenomenon.The damage variable equation based on the logistic function can be well used to describe the shear damage characteristics of expansive soil,and the proposed shear damage model is in good agreement with the ring shear test results.The vector sum method considering the damage softening behavior of the shear zone can be well applied to analyze the stability evolution characteristics of the expansive soil slope.The stability factor of the expansive soil slope decreases with the increase of shear displacement,showing an obvious progressive failure behavior.
基金supported by the National Natural Science Foundation of China(Grant Nos.12202028,52022007,51905510)the National Science and Technology Major Project(Grant Nos.J2019-IV-0009-0077,J2019-IV-0006-0074,J2019-IV-0016-0084).
文摘In this work,heat treatment experiments at 1050 and 1100℃were carried out on single-crystal su-peralloy specimens coated with the electron beam physical vapor deposition(EB-PVD)thermal barrier coating(TBC)system.Furthermore,the evolution of microstructural characteristics and sintering-induced mechanical properties were separately obtained by the field emission scanning electron microscope(FE-SEM)and nanoindenter,providing inputs for damage modeling.Meanwhile,the critical compressive strain of TBCs at room temperature was acquired using 3D digital image correlation(3D-DIC)technology to characterize the interfacial damage combined with the experimentally observed buckling modes.The re-sults demonstrate that not only does oxidative damage exist in the TBCs system due to thermally grown oxide(TGO)growth,but additional damage is generated by thermal cycling and sintering behavior,re-spectively.Then,a nonlinear cumulative interfacial damage model considering multiple failure factors is developed to predict TBCs’life.The error between the measured damage and calculated damage is less than 15%,showing good prediction accuracy.
基金supported by the Xi’an Key Laboratory of Geotechnical and Underground Engineering Open Fund Project (XKLGUEKF20-03)the Natural Science Basic Research Program of Shaanxi Province General Project-Youth Project(2024JC-YBQN-0258)。
文摘As one of the most common occurring geological landforms in deep rock formations, the dynamic mechanical properties of layered composite rock bodies under impact loading have been widely studied by scholars. To study the dynamic properties of soft and hard composite rocks with different thickness ratios, this paper utilizes cement, quartz sand and gypsum powder to construct soft and hard composite rock specimens and utilizes a combination of indoor tests, numerical calculations, and theoretical analyses to investigate the mechanical properties of soft and hard composite rock bodies. The test results reveal that:(1) When the proportion of hard rock increases from 20% to 50%, the strength of the combined rock body increases by 69.14 MPa and 87 MPa when the hard rock face and soft rock face are loaded, respectively;however, when the proportion of hard rock is the same, the compressive strength of the hard rock face impact is 9%-17% greater than that of the soft rock face impact;(2) When a specimen of soft and hard combined rock body is subjected to impact loading, the damage mode involves mixed tension and shear damage, and the cracks generally first appear at the ends of the specimen, then develop on the laminar surface from the impact surface, and finally end in the overall damage of the soft rock part. The development rate and the total number of cracks in the same specimen when the hard rock face is impacted are significantly greater than those when the soft rock face is impacted;(3) By introducing Weibull’s statistical strength theory to establish the damage variables of soft-hard combined rock bodies, combined with the DP strength criterion, the damage model and the Kelvin body are concatenated to obtain a statistical damage constitutive model, which can better fit the full stress-strain curve of soft-hard combined rock body specimens under a single impact load.
