Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelas...Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.展开更多
A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing m...A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.展开更多
Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,u...Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,uni-axial quasi-static and dynamic tensile tests at strain rates of 10^(-4),1,10,100,and 250 s^(-1)were carried out.In order to investigate the influence of stress state on the deformation and fracture parameters,specimens with various geometries were used in the experiments.Stress strain curves and fracture strains of the GJS-450 alloy in the strain rate range of 10^(-4)to 250 s^(-1)were obtained.A strain rate-dependent plastic flow model was proposed to describe the mechanical behavior in the corresponding strain-rate range.The available damage model was extended to take the strain rate into account and calibrated based on the analysis of local fracture strains.Simulations with the proposed plastic flow model and the damage model were conducted to observe the deformation and fracture process.The results show that the strain rate has obviously nonlinear effects on the yield stress and fracture strain of GJS-450 alloys.The predictions with the proposed plastic flow and damage models at various strain rates agree well with the experimental results,which illustrates that the rate-dependent plastic flow and damage models can be used to describe the mechanical behavior of cast iron alloys at elevated strain rates.The proposed plastic flow and damage models can be used to describe the deformation and fracture analysis of materials with similar properties.展开更多
The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and f...The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and failure mechanism of Xiyu conglomerate collected from Momoke Water Control Project,southwestern China,were analyzed and discussed based on the experimental results of triaxial compression test and 3D X-ray computed tomography test.The results show that with increasing confining pressure,the deformation characteristics and all characteristic stresses increase monotonically,while the dilation angle and dilatancy index decrease,and exponential function model can accurately describe the evolution rule of dilatancy index with confining pressure.While the porosity is negatively correlated with confining pressure.The failure modes of Xiyu conglomerate include axial tensile cracks,shear cracks,local cross cracks and cracks around gravel.With increasing confining pressure,the failure modes transform from tension cracks to shear cracks.A non-associated micromechanical damage model considering pressure dependent matrix presenting tension-compression asymmetry is proposed and applied to Xiyu conglomerate with pores and a large number of gravels.By comparing numerical calculations and experimental results,the proposed micromechanical plastic damage model is able to describe the mechanical behavior of Xiyu conglomerate.展开更多
Fatigue life and reliability of aero-engine blade are always of important significance to flight safety.The establishment of damage model is one of the key factors in blade fatigue research.Conventional linear Miner＇...Fatigue life and reliability of aero-engine blade are always of important significance to flight safety.The establishment of damage model is one of the key factors in blade fatigue research.Conventional linear Miner＇s sum method is not suitable for aero-engine because of its low accuracy.A back propagation neutral network（BPNN） based on the combination of Levenberg-Marquardt（LM） and finite element method（FEM） is used to describe process of nonlinear damage accumulation behavior in material and predict fatigue life of the blade.Fatigue tests of standard specimen made from TC4 are carried out to obtain material fatigue parameters and S-N curve.A nonlinear continuum damage model（CDM）,based on the BPNN with one hidden layer and ten neurons,is built to investigate the nonlinear damage accumulation behavior,in which the results from the tests are used as training set.Comparing with linear models and previous nonlinear models,BPNN has the lowest calculation error in full load range.It has significant accuracy when the load is below 500 MPa.Especially,when the load is 350 MPa,the calculation error of the BPNN is only 0.4%.The accurate model of the blade is built by using 3D coordinate measurement technology.The loading cycle in fatigue analysis is defined from takeoff to cruise in 10 min,and the load history is obtained from finite element analysis（FEA）.Then the fatigue life of the compressor blade is predicted by using the BPNN model.The final fatigue life of the aero-engine blade is 6.55 104 cycles（10 916 h） based on the BPNN model,which is effective for the virtual design of aero-engine blade.展开更多
To study rock damage characteristics under long-term freeze-thaw cycles and loads,rock freeze-thaw and creep damage factors were defined based on nuclear magnetic resonance porosity and volume strain,respectively.The ...To study rock damage characteristics under long-term freeze-thaw cycles and loads,rock freeze-thaw and creep damage factors were defined based on nuclear magnetic resonance porosity and volume strain,respectively.The damage factor is introduced into the basic rheological element,and the non-linear creep damage constitutive model and freeze-thaw rock equation are established to describe non-linear creep characteristics under a constant load.Simultaneously,the creep test of freeze-thaw rock under step loading is performed.Based on the test data,the applicability and accuracy of the creep damage freeze-thaw rock model are analyzed and verified.The results show that freeze-thaw cycles result in continuous rock pore structure damage and deterioration,and nuclear magnetic resonance porosity enhancement.The constant load induces increasing rock plastic deformation,volume,and creep aging damage.As the loading stress increases,the instantaneous rock elastic parameters increase,and the rheological elastic and viscosity parameters decrease.Furthermore,the damage degradation of freeze-thaw cycles weakens the rock viscoplasticity,resulting in a rapid decrease in the viscosity parameter with an increase in freeze-thaw cycles.Generally,the continuous damage of the rock is degraded,and the long-term strength decreases continuously.展开更多
The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-e...The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel’s inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface’s ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.展开更多
Hitherto, perilous rock is the weakest topic in disasters studies. Specially, damage of control fissure under loads is one key technique in study of develop mechanism of perilous rock. Damage division of end area of c...Hitherto, perilous rock is the weakest topic in disasters studies. Specially, damage of control fissure under loads is one key technique in study of develop mechanism of perilous rock. Damage division of end area of control fissure was defined by authors, then calculation methods of timed-Poisson＇s ratio and timed-Young＇s modulus were established in damage mechanics theory. Further, the authors set up damage constitutive equation of control fissure, which founds important basis to numerical simulation for control fissure to develop.展开更多
Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock se...Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.展开更多
In the present paper, a micromechanically based damage model for microcrack-weakened solids is developed. The concept of the domain of microcrack growth (DMG) is defined and used to describe the damage state and the a...In the present paper, a micromechanically based damage model for microcrack-weakened solids is developed. The concept of the domain of microcrack growth (DMG) is defined and used to describe the damage state and the anisotropic properties of brittle materials. After choosing an appropriate fracture criterion of microcrack, we obtain the analytical expression of DMG under a monotonically in- creasing proportional plane stress. Under a complex loading path, the evolution equation of DMG and the overall effective compliance tensor of damaged materials are given.展开更多
The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit dia...The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit diagram(FFLD)was transformed into a stress-based(σ-FFLD)and effective plastic strain(EPS)vs triaxiality(η)plot to remove the excess dependency of fracture limits over the strains.For the prediction of fracture limits,seven different damage models were calibrated.The Oh model displayed the best ability to predict the fracture locus with the least absolute error.Though the experimentally obtained fracture limits have only been used for the numerical analysis,none of the considered damage models predicted the fracture strains over the entire considered range of stress triaxiality(0.33<η<0.66).The deep drawing process window helped to determine wrinkling,safe and fracture zones while drawing the cylindrical cups under different temperature and lubricating conditions.Further,the highest drawing ratio of 2 was achieved at 673 K under the lubricating condition.All the numerically predicted results of both stretch forming and deep drawing processes using the Hill 1948 anisotropic yielding function were found to be good within the acceptable range of error.展开更多
Based on the analysis of the deformation in an infinite isotropic elastic matrix with an embedded elliptic crack under far field coupled tensile and shear stresses, the energy release rate and a mixed fracture criteri...Based on the analysis of the deformation in an infinite isotropic elastic matrix with an embedded elliptic crack under far field coupled tensile and shear stresses, the energy release rate and a mixed fracture criterion are obtained using an energy balance approach. The additional compliance tensor induced by a single opening elliptic microcrack in a representative volume element is derived, and the effect of microcracks with random orientations is analyzed with the Taylor＇s scheme by introducing an appropriate probability density function. A micromechanical damage model for rocks and concretes is obtained and is verified with experimental results.展开更多
The frost durability of concrete is considered from structural engineering points of view.Specific failure process is analyzed and a damage model is established,which can describe the deterioration of concrete during ...The frost durability of concrete is considered from structural engineering points of view.Specific failure process is analyzed and a damage model is established,which can describe the deterioration of concrete during the whole freeze thawing process.The model is verified by test data.The parameters of model can explain the effect of pore structures or water to binder ratio on frost durability of concrete.展开更多
A new non-Euclidean continuum damage model is proposed to investigate the zonal disintegration phenomenon of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition as well as the tota...A new non-Euclidean continuum damage model is proposed to investigate the zonal disintegration phenomenon of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition as well as the total elastic stress field distributions.The elastic stress fields of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition axe obtained.If the elastic stresses of the surrounding rocks satisfy the strength criterion of the deep rock masses,the number,size and location of fractured and nonfractured zones are determined.The effect of physico-mechanical parameters of the surrounding rocks on the zonal disintegration phenomenon is studied and numerical computation is carried out.It is found from numerical results that the number,size and location of fractured and non-fractured zones are sensitive to the physico-mechanical parameters of the surrounding rocks.展开更多
To accurately describe damage within coal, digital image processing technology was used to determine texture parameters and obtain quantitative information related to coal meso-cracks. The relationship between damage ...To accurately describe damage within coal, digital image processing technology was used to determine texture parameters and obtain quantitative information related to coal meso-cracks. The relationship between damage and mesoscopic information for coal under compression was then analysed. The shape and distribution of damage were comprehensively considered in a defined damage variable, which was based on the texture characteristic. An elastic-brittle damage model based on the mesostructure information of coal was established. As a result, the damage model can appropriately and reliably replicate the processes of initiation, expansion, cut-through and eventual destruction of microscopic damage to coal under compression. After comparison, it was proved that the predicted overall stress-strain response of the model was comparable to the experimental result.展开更多
This paper introduces a stiffness reduction based model developed by the authors to characterize accumulative fatigue damage in unidirectional plies and(0/θ/0)composite laminates in fiber reinforced polymer(FRP)compo...This paper introduces a stiffness reduction based model developed by the authors to characterize accumulative fatigue damage in unidirectional plies and(0/θ/0)composite laminates in fiber reinforced polymer(FRP)composite laminates.The proposed damage detection model is developed based on a damage evolution mechanism,including crack initiation and crack damage progress in matrix,matrix-fiber interface and fibers.Research result demonstrates that the corresponding stiffness of unidirectional composite laminates is reduced as the number of loading cycles progresses.First,three common models in literatures are presented and compared.Tensile viscosity,Young’s modulus and ultimate tensile stress of composites are incorporated as key factors in this model and are modified in accordance with temperature.Four types of FRP composite property parameters,including Carbon Fiber Reinforced Polymer(CFRP),Aramid Fiber Reinforced Polymer(AFRP),Glass Fiber Reinforced Polymer(GFRP),and Basalt Fiber Reinforced Polymer(BFRP),are considered in this research,and a comparative parameter study of FRP unidirectional composite laminates with different off-angle plies using control variate method are discussed.It is concluded that the relationship between the drop in stiffness and the number of cycles also shows three different regions,following the mechanism of damage of FRP composites and the matrix is the dominant factor determined by temperature,while fiber strength is the dominant factor that determine the reliability of composite.展开更多
With the risk of disappearing for the rock paintings considering long-term exposure in Helan Mountain,the freeze-thaw(F-T)cycling experiments were carried out with 12-hour F-T cycling(0,10,20,30,and 40 F-T cycles)unde...With the risk of disappearing for the rock paintings considering long-term exposure in Helan Mountain,the freeze-thaw(F-T)cycling experiments were carried out with 12-hour F-T cycling(0,10,20,30,and 40 F-T cycles)under five kinds of confining pressures(5,10,20,30,and 40 MPa).The acoustic emission(AE)detect technology was used to reveal the rock fracturing characteristics during the triaxial compression test whole process.The stress-strain relation changes along with different confining pressures and F-T cycles.Peak stress and residual stress changes along with different confining pressures and damages,and the variation of axial stress-AE ringing counts-time changes along with different confining pressures and F-T cycles.The damage variable with AE parameter under F-T and force coupling was defined for the first time,and the damages model was established.The experimental results show that the F-T cycles lead to the decrease of rock strength and the gradual transformation of compression failure mode from brittleness to plasticity.The confining pressure provides a certain ability to resist deformation and inhibit crack growth for rock samples after F-T cycles.The temporal and spatial evolution law of AE counts well corresponds to the loading and failure process of the rock samples.The AE 3D positioning technology can accurately capture the development position and direction of internal cracks and pores of rock,and the failure form is conical shear failure.The established damage model has a better fittingness between the theoretical calculation results and the test results,and is reasonable to be used in the future for protection of Helan Mountain rock painting.展开更多
A long-term damage cumulative model for the duration of load effect of structural timber is proposed in this paper, which is economical in analysis as well as involving long-term hygrothermal effect. Based on the Mine...A long-term damage cumulative model for the duration of load effect of structural timber is proposed in this paper, which is economical in analysis as well as involving long-term hygrothermal effect. Based on the Miner linear damage cumulative theory, the cumulative damage model is applied to analyze the annual hygrothermal, daily cyclic thermal and daily cyclic relative humidity＇s effect on load-duration behavior and to calculate the sum of damage in one year. The results indicate that the annual and daily hygrothermal effect should be taken into consideration when calculating the damage accumulation, in which the influence levels from large to small are annual hygrothermal, daily relative humidity and daily thermal effect, Considering both annual and daily hygrothermal variations as external loads the long-term model is determined. Its application to service-life prediction of a historic timber structure verifies the feasibility and high-efficiency of the proposed approach.展开更多
Based on the Gurson-Tvergaard-Needleman(GTN)damage model considering the defect damage evolution,the influence of void defects caused by the casting process on cast steel nodes mechanical properties was studied.Firstl...Based on the Gurson-Tvergaard-Needleman(GTN)damage model considering the defect damage evolution,the influence of void defects caused by the casting process on cast steel nodes mechanical properties was studied.Firstly,based on the GTN damage model,the model s parameter combination of G20Mn5N cast steel was given.Then,the mechanical properties of cast steel nodes were evaluated using the GTN damage model in ABAQUS software,and the influence of model parameters on the failure results was investigated.The results show that the cast steel node considering the GTN damage model fails under 1.93 times of the load.The bearing capacity is lower than that of the bilinear model,and the failure speed is faster.Changes in model parameters will cause a shift in the failure critical point.Meanwhile,the plastic strain index affects the void volume fractions,which shows different variation laws under uniaxial tensile and cyclic loads.Therefore,the GTN damage model establishes the relationship between the micro-defects and macro-mechanical properties of materials,which can better simulate the failure results of structures.展开更多
Based on fluid mechanics, thermodynamics and damage mechanics, thermal-hydro-mechanical （THM） coupling damage model of brittle rock is established by analyzing THM coupling mechanism, where THM coupling damage varia...Based on fluid mechanics, thermodynamics and damage mechanics, thermal-hydro-mechanical （THM） coupling damage model of brittle rock is established by analyzing THM coupling mechanism, where THM coupling damage variable DTHM is dominated by TH coupling damage variable DTH, TM coupling damage variable DTM and HM coupling damage variable DHM, and DTH is firstly expressed in term of dimensionless total thermal conductivity of the water Nu. Permeability test, uni-axial compression test and THM coupling test are conducted to measure the permeability, elastic modulus and THM coupling stress-strain curves of brittle rock. The tested values of THM coupling elastic modulus E＇HM are in good agreement with the predicted values of THM coupling elastic modulus ETHM, which can verify the newly established THM coupling damage model.展开更多
基金supported by the China Scholarship Council Program(Grant No.202008320274)it is also supported by Technical University of Munich.
文摘Localized rock failures,like cracks or shear bands,demand specific attention in modeling for solids and structures.This is due to the uncertainty of conventional continuum-based mechanical models when localized inelastic deformation has emerged.In such scenarios,as macroscopic inelastic reactions are primarily influenced by deformation and microstructural alterations within the localized area,internal variables that signify these microstructural changes should be established within this zone.Thus,localized deformation characteristics of rocks are studied here by the preset angle shear experiment.A method based on shear displacement and shear stress differences is proposed to identify the compaction,yielding,and residual points for enhancing the model's effectiveness and minimizing subjective influences.Next,a mechanical model for the localized shear band is depicted as an elasto-plastic model outlining the stress-displacement relation across both sides of the shear band.Incorporating damage theory and an elasto-plastic model,a proposed damage model is introduced to replicate shear stressdisplacement responses and localized damage evolution in intact rocks experiencing shear failure.Subsequently,a novel nonlinear mathematical model based on modified logistic growth theory is proposed for depicting the shear band's damage evolution pattern.Thereafter,an innovative damage model is proposed to effectively encompass diverse rock material behaviors,including elasticity,plasticity,and softening behaviors.Ultimately,the effects of the preset angles,temperature,normal stresses and the residual shear strength are carefully discussed.This discovery enhances rock research in the proposed damage model,particularly regarding shear failure mode.
基金supported by the Independent Innovation Research Program of China University of Petroleum(East China)(No.27RA2215005)。
文摘A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.
基金Supported by National Natural Science Foundation of China (Grant Nos.12202205,U1730101)the Federal Ministry of Economic Affairs and Energy (BMWi)via the German Federation of Industrial Research Associations‘Otto von Guericke’e.V. (AiF) (IGF-Nr.19567N)Forschungsvereinigung Automobiltechnik e.V. (FAT)。
文摘Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry.To study the mechanical behavior of a typical ductile cast iron(GJS-450)with nodular graphite,uni-axial quasi-static and dynamic tensile tests at strain rates of 10^(-4),1,10,100,and 250 s^(-1)were carried out.In order to investigate the influence of stress state on the deformation and fracture parameters,specimens with various geometries were used in the experiments.Stress strain curves and fracture strains of the GJS-450 alloy in the strain rate range of 10^(-4)to 250 s^(-1)were obtained.A strain rate-dependent plastic flow model was proposed to describe the mechanical behavior in the corresponding strain-rate range.The available damage model was extended to take the strain rate into account and calibrated based on the analysis of local fracture strains.Simulations with the proposed plastic flow model and the damage model were conducted to observe the deformation and fracture process.The results show that the strain rate has obviously nonlinear effects on the yield stress and fracture strain of GJS-450 alloys.The predictions with the proposed plastic flow and damage models at various strain rates agree well with the experimental results,which illustrates that the rate-dependent plastic flow and damage models can be used to describe the mechanical behavior of cast iron alloys at elevated strain rates.The proposed plastic flow and damage models can be used to describe the deformation and fracture analysis of materials with similar properties.
基金supported by National Natural Science Foundation of China(Nos.12102129 and 12072102)the Water Science and Technology Special Fund of Xinjiang Uygur Autonomous Region(No.XSKJ-2023-30)+1 种基金the Central University Basic Research Fund of China(Nos.B220202014 and B230201059)the Key Laboratory of Safe Mining of Deep Metal Mines,Ministry of Education(No.DM2022B01)。
文摘The complex and special mechanical properties of Xiyu conglomerate are of great significance to the construction of water conservancy and hydropower engineering.The crack characteristic stress,dilatancy behavior,and failure mechanism of Xiyu conglomerate collected from Momoke Water Control Project,southwestern China,were analyzed and discussed based on the experimental results of triaxial compression test and 3D X-ray computed tomography test.The results show that with increasing confining pressure,the deformation characteristics and all characteristic stresses increase monotonically,while the dilation angle and dilatancy index decrease,and exponential function model can accurately describe the evolution rule of dilatancy index with confining pressure.While the porosity is negatively correlated with confining pressure.The failure modes of Xiyu conglomerate include axial tensile cracks,shear cracks,local cross cracks and cracks around gravel.With increasing confining pressure,the failure modes transform from tension cracks to shear cracks.A non-associated micromechanical damage model considering pressure dependent matrix presenting tension-compression asymmetry is proposed and applied to Xiyu conglomerate with pores and a large number of gravels.By comparing numerical calculations and experimental results,the proposed micromechanical plastic damage model is able to describe the mechanical behavior of Xiyu conglomerate.
基金supported by National Natural Science Foundation of China (Grant No. 60879002)Tianjin Municipal Science and Technology Support Plan of China (Grant No. 10ZCKFGX03800)
文摘Fatigue life and reliability of aero-engine blade are always of important significance to flight safety.The establishment of damage model is one of the key factors in blade fatigue research.Conventional linear Miner＇s sum method is not suitable for aero-engine because of its low accuracy.A back propagation neutral network（BPNN） based on the combination of Levenberg-Marquardt（LM） and finite element method（FEM） is used to describe process of nonlinear damage accumulation behavior in material and predict fatigue life of the blade.Fatigue tests of standard specimen made from TC4 are carried out to obtain material fatigue parameters and S-N curve.A nonlinear continuum damage model（CDM）,based on the BPNN with one hidden layer and ten neurons,is built to investigate the nonlinear damage accumulation behavior,in which the results from the tests are used as training set.Comparing with linear models and previous nonlinear models,BPNN has the lowest calculation error in full load range.It has significant accuracy when the load is below 500 MPa.Especially,when the load is 350 MPa,the calculation error of the BPNN is only 0.4%.The accurate model of the blade is built by using 3D coordinate measurement technology.The loading cycle in fatigue analysis is defined from takeoff to cruise in 10 min,and the load history is obtained from finite element analysis（FEA）.Then the fatigue life of the compressor blade is predicted by using the BPNN model.The final fatigue life of the aero-engine blade is 6.55 104 cycles（10 916 h） based on the BPNN model,which is effective for the virtual design of aero-engine blade.
基金Projects(41502327,51474252,51774323)supported by the National Natural Science Foundation of ChinaProject(2020JJ4712)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(CX20190221)supported by the Hunan Provincial Innovation Foundation for Postgraduate,ChinaProject(ZJRMG-2018-Z03)supported by the Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province,China。
文摘To study rock damage characteristics under long-term freeze-thaw cycles and loads,rock freeze-thaw and creep damage factors were defined based on nuclear magnetic resonance porosity and volume strain,respectively.The damage factor is introduced into the basic rheological element,and the non-linear creep damage constitutive model and freeze-thaw rock equation are established to describe non-linear creep characteristics under a constant load.Simultaneously,the creep test of freeze-thaw rock under step loading is performed.Based on the test data,the applicability and accuracy of the creep damage freeze-thaw rock model are analyzed and verified.The results show that freeze-thaw cycles result in continuous rock pore structure damage and deterioration,and nuclear magnetic resonance porosity enhancement.The constant load induces increasing rock plastic deformation,volume,and creep aging damage.As the loading stress increases,the instantaneous rock elastic parameters increase,and the rheological elastic and viscosity parameters decrease.Furthermore,the damage degradation of freeze-thaw cycles weakens the rock viscoplasticity,resulting in a rapid decrease in the viscosity parameter with an increase in freeze-thaw cycles.Generally,the continuous damage of the rock is degraded,and the long-term strength decreases continuously.
文摘The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel’s inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface’s ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.
基金Project supported by the Natural Science Foundation of Chongqing (No.2005BA7008)the Fund of Key Laboratory of the Ministry of Education of China (No.200310)
文摘Hitherto, perilous rock is the weakest topic in disasters studies. Specially, damage of control fissure under loads is one key technique in study of develop mechanism of perilous rock. Damage division of end area of control fissure was defined by authors, then calculation methods of timed-Poisson＇s ratio and timed-Young＇s modulus were established in damage mechanics theory. Further, the authors set up damage constitutive equation of control fissure, which founds important basis to numerical simulation for control fissure to develop.
基金funded by the National Natural Science Foundation of China(Grant Nos.51578543)。
文摘Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.
基金The project supported by National Natural Science Foundation of China
文摘In the present paper, a micromechanically based damage model for microcrack-weakened solids is developed. The concept of the domain of microcrack growth (DMG) is defined and used to describe the damage state and the anisotropic properties of brittle materials. After choosing an appropriate fracture criterion of microcrack, we obtain the analytical expression of DMG under a monotonically in- creasing proportional plane stress. Under a complex loading path, the evolution equation of DMG and the overall effective compliance tensor of damaged materials are given.
基金Science and Engineering Research Board,Government of India(ECR/2016/001402)BITS-Pilani,Hyderabad Campus。
文摘The stretch forming and the deep-drawing processes were carried out at 300 and 673 K to determine the safe forming and fracture limits of IN625 alloy.The experimentally obtained strain-based fracture forming limit diagram(FFLD)was transformed into a stress-based(σ-FFLD)and effective plastic strain(EPS)vs triaxiality(η)plot to remove the excess dependency of fracture limits over the strains.For the prediction of fracture limits,seven different damage models were calibrated.The Oh model displayed the best ability to predict the fracture locus with the least absolute error.Though the experimentally obtained fracture limits have only been used for the numerical analysis,none of the considered damage models predicted the fracture strains over the entire considered range of stress triaxiality(0.33<η<0.66).The deep drawing process window helped to determine wrinkling,safe and fracture zones while drawing the cylindrical cups under different temperature and lubricating conditions.Further,the highest drawing ratio of 2 was achieved at 673 K under the lubricating condition.All the numerically predicted results of both stretch forming and deep drawing processes using the Hill 1948 anisotropic yielding function were found to be good within the acceptable range of error.
基金the National Natural Science Foundation of China (Nos.E50725414 and E50621403).
文摘Based on the analysis of the deformation in an infinite isotropic elastic matrix with an embedded elliptic crack under far field coupled tensile and shear stresses, the energy release rate and a mixed fracture criterion are obtained using an energy balance approach. The additional compliance tensor induced by a single opening elliptic microcrack in a representative volume element is derived, and the effect of microcracks with random orientations is analyzed with the Taylor＇s scheme by introducing an appropriate probability density function. A micromechanical damage model for rocks and concretes is obtained and is verified with experimental results.
基金theNationalNaturalScienceFoundationofChina (No .5 0 2 780 39)
文摘The frost durability of concrete is considered from structural engineering points of view.Specific failure process is analyzed and a damage model is established,which can describe the deterioration of concrete during the whole freeze thawing process.The model is verified by test data.The parameters of model can explain the effect of pore structures or water to binder ratio on frost durability of concrete.
基金supported by the National Natural Science Foundation of China(Nos.51279218,51021001 and 51078371)Natural Science Foundation Project of CQ CSTC(No.CSTC,2009BA4046)the Fundamental Research Funds forthe Central Universities(No.CDJZR10205501)
文摘A new non-Euclidean continuum damage model is proposed to investigate the zonal disintegration phenomenon of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition as well as the total elastic stress field distributions.The elastic stress fields of the surrounding rocks around deep spherical tunnels under hydrostatic pressure condition axe obtained.If the elastic stresses of the surrounding rocks satisfy the strength criterion of the deep rock masses,the number,size and location of fractured and nonfractured zones are determined.The effect of physico-mechanical parameters of the surrounding rocks on the zonal disintegration phenomenon is studied and numerical computation is carried out.It is found from numerical results that the number,size and location of fractured and non-fractured zones are sensitive to the physico-mechanical parameters of the surrounding rocks.
基金funding by the National Natural Science Foundation of China(Nos.51474039 and 51404046)the Project of Shanxi Provincial Federation of Coalbed Methane Research(No.2013012010)the Science Foundation of North University of China(No.XJJ2016033)
文摘To accurately describe damage within coal, digital image processing technology was used to determine texture parameters and obtain quantitative information related to coal meso-cracks. The relationship between damage and mesoscopic information for coal under compression was then analysed. The shape and distribution of damage were comprehensively considered in a defined damage variable, which was based on the texture characteristic. An elastic-brittle damage model based on the mesostructure information of coal was established. As a result, the damage model can appropriately and reliably replicate the processes of initiation, expansion, cut-through and eventual destruction of microscopic damage to coal under compression. After comparison, it was proved that the predicted overall stress-strain response of the model was comparable to the experimental result.
文摘This paper introduces a stiffness reduction based model developed by the authors to characterize accumulative fatigue damage in unidirectional plies and(0/θ/0)composite laminates in fiber reinforced polymer(FRP)composite laminates.The proposed damage detection model is developed based on a damage evolution mechanism,including crack initiation and crack damage progress in matrix,matrix-fiber interface and fibers.Research result demonstrates that the corresponding stiffness of unidirectional composite laminates is reduced as the number of loading cycles progresses.First,three common models in literatures are presented and compared.Tensile viscosity,Young’s modulus and ultimate tensile stress of composites are incorporated as key factors in this model and are modified in accordance with temperature.Four types of FRP composite property parameters,including Carbon Fiber Reinforced Polymer(CFRP),Aramid Fiber Reinforced Polymer(AFRP),Glass Fiber Reinforced Polymer(GFRP),and Basalt Fiber Reinforced Polymer(BFRP),are considered in this research,and a comparative parameter study of FRP unidirectional composite laminates with different off-angle plies using control variate method are discussed.It is concluded that the relationship between the drop in stiffness and the number of cycles also shows three different regions,following the mechanism of damage of FRP composites and the matrix is the dominant factor determined by temperature,while fiber strength is the dominant factor that determine the reliability of composite.
基金Funded by the National Natural Science Foundation of China(Nos.11662015,51768059 and 51468053)。
文摘With the risk of disappearing for the rock paintings considering long-term exposure in Helan Mountain,the freeze-thaw(F-T)cycling experiments were carried out with 12-hour F-T cycling(0,10,20,30,and 40 F-T cycles)under five kinds of confining pressures(5,10,20,30,and 40 MPa).The acoustic emission(AE)detect technology was used to reveal the rock fracturing characteristics during the triaxial compression test whole process.The stress-strain relation changes along with different confining pressures and F-T cycles.Peak stress and residual stress changes along with different confining pressures and damages,and the variation of axial stress-AE ringing counts-time changes along with different confining pressures and F-T cycles.The damage variable with AE parameter under F-T and force coupling was defined for the first time,and the damages model was established.The experimental results show that the F-T cycles lead to the decrease of rock strength and the gradual transformation of compression failure mode from brittleness to plasticity.The confining pressure provides a certain ability to resist deformation and inhibit crack growth for rock samples after F-T cycles.The temporal and spatial evolution law of AE counts well corresponds to the loading and failure process of the rock samples.The AE 3D positioning technology can accurately capture the development position and direction of internal cracks and pores of rock,and the failure form is conical shear failure.The established damage model has a better fittingness between the theoretical calculation results and the test results,and is reasonable to be used in the future for protection of Helan Mountain rock painting.
基金Supported by the National Natural Science Foundation of China (50708083)
文摘A long-term damage cumulative model for the duration of load effect of structural timber is proposed in this paper, which is economical in analysis as well as involving long-term hygrothermal effect. Based on the Miner linear damage cumulative theory, the cumulative damage model is applied to analyze the annual hygrothermal, daily cyclic thermal and daily cyclic relative humidity＇s effect on load-duration behavior and to calculate the sum of damage in one year. The results indicate that the annual and daily hygrothermal effect should be taken into consideration when calculating the damage accumulation, in which the influence levels from large to small are annual hygrothermal, daily relative humidity and daily thermal effect, Considering both annual and daily hygrothermal variations as external loads the long-term model is determined. Its application to service-life prediction of a historic timber structure verifies the feasibility and high-efficiency of the proposed approach.
基金The National Key Research and Development Program of China(No.2017YFC0805100)the National Natural Science Foundation of China(No.51578137)the Priority Academic Program Development of Jiangsu Higher Education Institutions,the Open Research Fund Program of Jiangsu Key Laboratory of Engineering Mechanics.
文摘Based on the Gurson-Tvergaard-Needleman(GTN)damage model considering the defect damage evolution,the influence of void defects caused by the casting process on cast steel nodes mechanical properties was studied.Firstly,based on the GTN damage model,the model s parameter combination of G20Mn5N cast steel was given.Then,the mechanical properties of cast steel nodes were evaluated using the GTN damage model in ABAQUS software,and the influence of model parameters on the failure results was investigated.The results show that the cast steel node considering the GTN damage model fails under 1.93 times of the load.The bearing capacity is lower than that of the bilinear model,and the failure speed is faster.Changes in model parameters will cause a shift in the failure critical point.Meanwhile,the plastic strain index affects the void volume fractions,which shows different variation laws under uniaxial tensile and cyclic loads.Therefore,the GTN damage model establishes the relationship between the micro-defects and macro-mechanical properties of materials,which can better simulate the failure results of structures.
基金Project(11072269) supported by the National Natural Science Foundation of ChinaProject(20090162110066) supported by the Research Fund for the Doctoral Program of Higher Education of China
文摘Based on fluid mechanics, thermodynamics and damage mechanics, thermal-hydro-mechanical （THM） coupling damage model of brittle rock is established by analyzing THM coupling mechanism, where THM coupling damage variable DTHM is dominated by TH coupling damage variable DTH, TM coupling damage variable DTM and HM coupling damage variable DHM, and DTH is firstly expressed in term of dimensionless total thermal conductivity of the water Nu. Permeability test, uni-axial compression test and THM coupling test are conducted to measure the permeability, elastic modulus and THM coupling stress-strain curves of brittle rock. The tested values of THM coupling elastic modulus E＇HM are in good agreement with the predicted values of THM coupling elastic modulus ETHM, which can verify the newly established THM coupling damage model.
