It is proposed a digital signal processing （DSP） controller used in the control system of six degree-of-freedom （DOF） giant magnetostrictive smart structure （GMSS）. Also are presented the controller design and i...It is proposed a digital signal processing （DSP） controller used in the control system of six degree-of-freedom （DOF） giant magnetostrictive smart structure （GMSS）. Also are presented the controller design and its implementation, the embedded adaptive least mean-square （LMS） control algorithm and the real-time experiments of GMSS. Three programs are embedded in this controller. Of them are the adaptive LMS control algorithm and the other two which are used to search for the optimal values for the initial weight vectors. Moreover, the work flow and the control approach of the GMSS with the DSP controller are introduced. The experimental results indicate that the DSP controller has better control precision and real-time property, and the damping effect is up to 20 dB-30 dB.展开更多
A novel current chopping mode was used in a switched reluctance motor drive system to make full use of the characteristics of digital signal processor (DSP) TMS320F240. The necessity of this 180° phase-shift curr...A novel current chopping mode was used in a switched reluctance motor drive system to make full use of the characteristics of digital signal processor (DSP) TMS320F240. The necessity of this 180° phase-shift current control (PSCC) mode is introduced first and then the principle of PSCC covering both hardware requirement and software programming is described in detail. The analysis made indicated that with this mode, the chopping frequency in winding can reach 20 kHz with 10 kHz power switches and the control frequency can reach 40 kHz at the same time. Subsequently, based on the linear and nonlinear mathematical models of the switched reluctance motor (SRM), some simulation work has been done. The simulation results show that when this mode is applied to SRM drive (SRD) system, the current waveform becomes better. So the ripple of the torque is reduced simultaneously and the vibration and acoustic noise are reduced involuntarily. Stationary tests show that the acoustic noise is greatly diminished. Finally, some experiments were made using a 50 kW SRD system for electric vehicle (EV). Experimental results indicate that this mode can be implemented feasibly and it has a good action on the SRD system.展开更多
就电动机变频调速自动控制系统的设计与实现展开研究。首先,给出了电动机变频调速自动控制系统整体框架,并详细阐述了数字信号处理器(Digital Signal Processor,DSP)技术。在软件设计部分,针对DSP技术存在控制复杂度高的问题,引入比例-...就电动机变频调速自动控制系统的设计与实现展开研究。首先,给出了电动机变频调速自动控制系统整体框架,并详细阐述了数字信号处理器(Digital Signal Processor,DSP)技术。在软件设计部分,针对DSP技术存在控制复杂度高的问题,引入比例-积分-微分(Proportional-Integral-Derivative,PID)控制策略简化控制流程,并提出了基于模糊控制的电动机变频调速自动控制方法,以实现更精确的变频调速控制。系统应用测试结果表明,新系统控制误差低至1.2%,波动范围小且故障率低至0.01次/h,使得系统稳定性指数(System Stability Index,SSI)仅为0.95,说明本研究为电动机变频调速领域的自动化和智能化提供了有价值的参考。展开更多
Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in orde...Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in order to reduce cost in the testing phase. Nowadays, real time PV simulators are obtained by using analog and/or digital components. In this paper, a real-time simulation of a PV system with a boost converter was proposed using only the digital signal processor （DSP） processor with two DC voltage sources to emulate the temperature and irradiation in the PV system. A MATLAB/ Simulink environment was used to develop the real-time PV system with a boost converter into a C-program and build it into a DSP controller TMS320F28335. Besides, the performance of the real-time DSP-based PV was tested in different temperature and irradiation conditions to observe the P-V and V-I characteristics. Further, the performance of the PV with a boost converter was tested at different temperatures and irradiations using MPPT algorithms. This scheme was tested through simulation and the results were validated with that of standard conditions given in the PV data sheets. Implementation of this project helped to attract more researchers to study renewable energy applications without real sources. This might facilitate the study of PV systems in a real-time scenario and the evaluation of what should be expected for PV modules available in the market.展开更多
This paper presents the field oriented vector control scheme for synchronous reluctance motor (SRM) drives, where current controller followed by hysteresis comparator is used. The test motor has a star-connected wound...This paper presents the field oriented vector control scheme for synchronous reluctance motor (SRM) drives, where current controller followed by hysteresis comparator is used. The test motor has a star-connected wound stator and a segmental rotor of the multiple barrier type with an external incremental encoder to sense rotor position. The magnetic characteristics of this motor are described using 2D finite element method, which is used firstly for rotor design of SRM. The field oriented vector control, that regulates the speed of the SRM, is provided by a quadrature axis current command developed by the speed controller. The simulation includes all realistic components of the system. This enables the calculation of currents and voltages in different parts of the voltage source inverter (VSI) and motor under transient and steady state conditions. Implementation has been done in MATLAB/Simulink. A study of hysteresis control scheme associated with current controllers has been made. Experimental results of the SRM control using TMS320F24X DSP board are presented. The speed of the SRM is successfully controlled in the constant torque region. Experimental results of closed loop speed control of the SRM are given to verify the proposed scheme.展开更多
基金National Natural Science Foundation of China for Key Project (60534020)Key Subject Foundation of Beijing (XK100060526)National 973 Research Program (G2002cb312205-02)
文摘It is proposed a digital signal processing （DSP） controller used in the control system of six degree-of-freedom （DOF） giant magnetostrictive smart structure （GMSS）. Also are presented the controller design and its implementation, the embedded adaptive least mean-square （LMS） control algorithm and the real-time experiments of GMSS. Three programs are embedded in this controller. Of them are the adaptive LMS control algorithm and the other two which are used to search for the optimal values for the initial weight vectors. Moreover, the work flow and the control approach of the GMSS with the DSP controller are introduced. The experimental results indicate that the DSP controller has better control precision and real-time property, and the damping effect is up to 20 dB-30 dB.
文摘A novel current chopping mode was used in a switched reluctance motor drive system to make full use of the characteristics of digital signal processor (DSP) TMS320F240. The necessity of this 180° phase-shift current control (PSCC) mode is introduced first and then the principle of PSCC covering both hardware requirement and software programming is described in detail. The analysis made indicated that with this mode, the chopping frequency in winding can reach 20 kHz with 10 kHz power switches and the control frequency can reach 40 kHz at the same time. Subsequently, based on the linear and nonlinear mathematical models of the switched reluctance motor (SRM), some simulation work has been done. The simulation results show that when this mode is applied to SRM drive (SRD) system, the current waveform becomes better. So the ripple of the torque is reduced simultaneously and the vibration and acoustic noise are reduced involuntarily. Stationary tests show that the acoustic noise is greatly diminished. Finally, some experiments were made using a 50 kW SRD system for electric vehicle (EV). Experimental results indicate that this mode can be implemented feasibly and it has a good action on the SRD system.
文摘就电动机变频调速自动控制系统的设计与实现展开研究。首先,给出了电动机变频调速自动控制系统整体框架,并详细阐述了数字信号处理器(Digital Signal Processor,DSP)技术。在软件设计部分,针对DSP技术存在控制复杂度高的问题,引入比例-积分-微分(Proportional-Integral-Derivative,PID)控制策略简化控制流程,并提出了基于模糊控制的电动机变频调速自动控制方法,以实现更精确的变频调速控制。系统应用测试结果表明,新系统控制误差低至1.2%,波动范围小且故障率低至0.01次/h,使得系统稳定性指数(System Stability Index,SSI)仅为0.95,说明本研究为电动机变频调速领域的自动化和智能化提供了有价值的参考。
文摘Recently, real-time simulation of renewable energy sources are indispensible for evaluating the performance of the maximum power point tracking （MPPT） controller, especially in the photovoltaic （PV） system in order to reduce cost in the testing phase. Nowadays, real time PV simulators are obtained by using analog and/or digital components. In this paper, a real-time simulation of a PV system with a boost converter was proposed using only the digital signal processor （DSP） processor with two DC voltage sources to emulate the temperature and irradiation in the PV system. A MATLAB/ Simulink environment was used to develop the real-time PV system with a boost converter into a C-program and build it into a DSP controller TMS320F28335. Besides, the performance of the real-time DSP-based PV was tested in different temperature and irradiation conditions to observe the P-V and V-I characteristics. Further, the performance of the PV with a boost converter was tested at different temperatures and irradiations using MPPT algorithms. This scheme was tested through simulation and the results were validated with that of standard conditions given in the PV data sheets. Implementation of this project helped to attract more researchers to study renewable energy applications without real sources. This might facilitate the study of PV systems in a real-time scenario and the evaluation of what should be expected for PV modules available in the market.
文摘This paper presents the field oriented vector control scheme for synchronous reluctance motor (SRM) drives, where current controller followed by hysteresis comparator is used. The test motor has a star-connected wound stator and a segmental rotor of the multiple barrier type with an external incremental encoder to sense rotor position. The magnetic characteristics of this motor are described using 2D finite element method, which is used firstly for rotor design of SRM. The field oriented vector control, that regulates the speed of the SRM, is provided by a quadrature axis current command developed by the speed controller. The simulation includes all realistic components of the system. This enables the calculation of currents and voltages in different parts of the voltage source inverter (VSI) and motor under transient and steady state conditions. Implementation has been done in MATLAB/Simulink. A study of hysteresis control scheme associated with current controllers has been made. Experimental results of the SRM control using TMS320F24X DSP board are presented. The speed of the SRM is successfully controlled in the constant torque region. Experimental results of closed loop speed control of the SRM are given to verify the proposed scheme.
