Ferric and ferrous ion plays critical roles in bioprocesses,their influences in many fields have not been fully explored due to the lack of methods for quantification of ferric and ferrous ions in biological system or...Ferric and ferrous ion plays critical roles in bioprocesses,their influences in many fields have not been fully explored due to the lack of methods for quantification of ferric and ferrous ions in biological system or complex matrix.In this study,an M13 bacteriophage(phage) was engineered for use as a sensor for ferric and ferrous ions via the display of a tyrosine residue on the P8 coat protein.The interaction between the specific phenol group of tyrosine and Fe^(3+)./ Fe^(2+).was used as the sensor.Transmission electron microscopy showed aggregation of the tyrosine-displaying phages after incubation with Fe^(3+) and Fe^(2+).The aggregated phages infected the host bacterium inefficiently.This phenomenon could be utilized for detection of ferric and ferrous ions.For ferric ions,a calibration curve ranging from 200 nmol/L to 8 μmol/L with a detection limit of 58 nmol/L was acquired.For ferrous ions,a calibration curve ranging from 800 nmol/L to 8μmol/L with a detection limit of 641.7 nmol/L was acquired.The assay was specific for Fe^((3+)) and Fe^((2+)) when tested against Ni^(2+),Pb^(2+),Zn^(2+),Mn^(2+),Co^(2+),Ca^(2+),Cu^(2+),Cr^(3+),Ba^(2+),and K^+.The tyrosine displaying phage to Fe^(3+) and Fe^(2+) interaction would have plenty of room in application to biomatenals and bionanotechnology.展开更多
Hepatitis B virus (HBV) is one of the major causes of chronic hepatitis, cirrhosis and liver cancer. In combating HBV infections, HBV diagnosis and vaccination are therefore critical. The hepatitis B virus surface ant...Hepatitis B virus (HBV) is one of the major causes of chronic hepatitis, cirrhosis and liver cancer. In combating HBV infections, HBV diagnosis and vaccination are therefore critical. The hepatitis B virus surface antigen (HBsAg) is a key target molecule in developing vaccines and diagnostic systems. To date, although HBsAg has been expressed in bacteria, yeasts and mammalian cells, there are still limitations in the existing ones, which leave the necessity for searching new HBsAg production methods. In this study, a simple phage display-based method was developed to produce the purified full-length HBsAg molecules for further immunization studies. For this purpose, the HBsAg coding gene was cloned into a pCANTAB5E phagemid vector and expressed on the surface of M13 filamentous phages. The HBsAg-expressing phage nanosystem was then used as immunization agent in BALB/cJ mice. The ELISA results for sera obtained from mice immunized with HBsAg-displaying phage particles revealed an immune response against HBsAg. These results demonstrate the potential use of a full-length antigen to be displayed on phages as cost effective adjuvant-free immunization agents as an alternative to the highly purified and more expensive antigens conjugated with carrier molecules.展开更多
Three-dimensional(3D) display technology—a cutting-edge medium for human-machine interaction—enhances visual information density via image dimensional expansion and reduces the cognitive load to improve the efficien...Three-dimensional(3D) display technology—a cutting-edge medium for human-machine interaction—enhances visual information density via image dimensional expansion and reduces the cognitive load to improve the efficiency of information exchange [1–3].展开更多
Limitations of difference maps showing circulation anomalies are analyzed, and the definition of the local pattern analogue coefficient (LPAC) is given together with the procedure for constructing such a map, followed...Limitations of difference maps showing circulation anomalies are analyzed, and the definition of the local pattern analogue coefficient (LPAC) is given together with the procedure for constructing such a map, followed by an example illustrating its useful application in circulation anomaly.展开更多
Mobile applications(apps for short)often need to display images.However,inefficient image displaying(IID)issues are pervasive in mobile apps,and can severely impact app performance and user experience.This paper first...Mobile applications(apps for short)often need to display images.However,inefficient image displaying(IID)issues are pervasive in mobile apps,and can severely impact app performance and user experience.This paper first establishes a descriptive framework for the image displaying procedures of IID issues.Based on the descriptive framework,we conduct an empirical study of 216 real-world IID issues collected from 243 popular open-source Android apps to validate the presence and severity of IID issues,and then shed light on these issues’characteristics to support research on effective issue detection.With the findings of this study,we propose a static IID issue detection tool TAPIR and evaluate it with 243 real-world Android apps.Encouragingly,49 and 64 previously-unknown IID issues in two different versions of 16 apps reported by TAPIR are manually confirmed as true positives,respectively,and 16 previously-unknown IID issues reported by TAPIR have been confirmed by developers and 13 have been fixed.Then,we further evaluate the performance impact of these detected IID issues and the performance improvement if they are fixed.The results demonstrate that the IID issues detected by TAPIR indeed cause significant performance degradation,which further show the effectiveness and efficiency of TAPIR.展开更多
Beijing Museum of Natural History is located in Chongwen District, close to the Temple of Heaven and Tianqiao Theater. It was founded in 1951 and formally named Beijing Museum of Natural History in 1962.
A method of drawing color spectrogram of speech by using microcomputer is described in this paper , and referred to the metod of drawing spectrogram by computer . With the software and no addition any other aqripment....A method of drawing color spectrogram of speech by using microcomputer is described in this paper , and referred to the metod of drawing spectrogram by computer . With the software and no addition any other aqripment., we can draw color three - dimension spectrogram ( or black -white spectrogram without color monitor ), and it is similar to spectrogram of sonagrapher .展开更多
Trehalose is a disaccharide with many applications in cosmetics,refrigeration,and food.Trehalose synthase is a significant enzyme in trehalose production.Escherichia coli is usually used to express this enzyme heterol...Trehalose is a disaccharide with many applications in cosmetics,refrigeration,and food.Trehalose synthase is a significant enzyme in trehalose production.Escherichia coli is usually used to express this enzyme heterologously.Since E.coli is a pathogenic strain,we chose Corynebacterium glutamicum ATCC13032 as an engineering strain in this study for food safety reasons.Because of its poor permeability,we constructed two recombinant C.glutamicum strains using two anchor proteins,PorH,and short-length NCgl1337,to anchor trehalose synthase from Streptomyces coelicolor on the cell surface and synthesize trehalose directly from maltose.Studies on enzymatic properties indicated that NCgl1337S–ScTreSK246A had better enzyme activity and thermal stability than the free enzyme.After optimizing the whole-cell transformation,the optimal transformation condition was 35°C,pH 7.0,and OD600 of 30.Under this condition,the conversion rate of 300 g/L maltose reached 69.5%in a 5 L fermentor.The relative conversion rate was still above 75%after repeated five times.展开更多
The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisi...The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisiae,three of which[(suppression of exponential defect protein,SED1),(cell wall protein 2,CWP2)and(delayed anaerobic protein 4,DAN4)]were reported to show higher activity of heterologous proteins thanα-agglutinin(AGα1).The performance of yeast-enhanced green fluorescent protein(yeGFP)was evaluated using laser scanning confocal microscopy and flow cytometry.The results showed that the three anchoring regions(SED1,CWP2 and AGα1)successfully displayed yeGFP on the cell wall.To investigate the effect of the three anchoring proteins on the surface display of Rhizopus oryzaeα-amylase(ROA1)and Aspergillus aculeatusβ-glucosidase(BGL1)in C.tropicalis,we constructed surface display gene cassettes for ROA1 and BGL1,respectively.The strains containing the anchoring proteins SED1 and CWP2 showed higher activity of ROA1 and BGL1 than the strains containing the anchoring protein AGα1.The highest ROA1 and BGL1 activities of strains with SED1 were 6.37 U/g CDW and 7.93 U/g CDW,respectively,which were sixfold and eightfold higher than those of strain with AGα1.In addition,we also optimized signal peptides.The results indicated that signal peptides have an impact on enzyme activity.展开更多
Smart electronic textiles with electronic functions like displaying can provide transformative opportunities for wearable devices that traditional rigid devices are hard to realize.A general strategy of enabling texti...Smart electronic textiles with electronic functions like displaying can provide transformative opportunities for wearable devices that traditional rigid devices are hard to realize.A general strategy of enabling textiles to display is weaving light-emitting fibers into textiles and designing control circuits.However,it remains challenging for the current electronic textiles to display full-color images and videos.Here,we demonstrate a large-area integrated electronic textile system(with a size of 72 cm×50 cm)by weaving light-emitting diode(LED)fibers,touch-sensing fibers and polyester fibers,which could display full-color images(with a gamut of 117.6%NTSC)and continuous videos(with a refresh rate of 11.7 Hz)by designing low-voltage supply mode and parallelly transmitting circuits.After integration of touch-sensing fibers,such textile system could achieve various touch display and interactive functions like smart phones or computers,including hand input of text,hand painting,computing and playing games.The stability and durability of textile system withstanding 5000 bending cycles was also demonstrated for wearable applications.The integrated electronic textile system shows similar flexibility and breathability with regular textiles,which is promising to serve as new human-machine interface to change the way in which people interact with electronics.展开更多
High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental sta...High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.展开更多
It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be...It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.展开更多
Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor m...Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.展开更多
Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However...Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However,chromatic aberration remains a serious longstanding problem for diffractive optics,hindering their broader adoption.To overcome the chromatic aberrations for red,green and blue(RGB)light sources,in this paper,we propose a counterintuitive multi-twist structure to achieve narrowband PBOEs without crosstalk,which plays a vital role to eliminate the chromatic aberration.The performance of our designed and fabricated narrowband Pacharatnam-Berry lenses(PBLs)aligns well with our simulation results.Furthermore,in a feasibility demonstration experiment using a laser projector,our proposed PBL system indeed exhibits a diminished chromatic aberration as compared to a broadband PBL.Additionally,polarization raytracing is implemented to demonstrate the versatility of the multi-twist structure for designing any RGB wavelengths with high contrast ratios.This analysis explores the feasibility of using RGB laser lines and quantum dot light-emitting diodes.Overall,our approach enables high optical efficiency,low fabrication complexity,and high degree of design freedom to accommodate any liquid crystal material and RGB light sources,holding immense potential for widespread applications of achromatic PBOEs.展开更多
At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficult...At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficulty.Based on the principle of naked-eye 3D display and the Fresnel optical theory,this paper designs a Fresnel lens array and the star-shaped liquid crystal display(LCD)switch of unit LCD screen to achieve low-crosstalk and high brightness uniformity for the autostereoscopic 3D display.The unit parameters of a 139.7 cm 4K model autostereoscopic 3D displayer are provided and they are optimized by the TracePro software.The results show that when the pitch of the Fresnel lens on the exit surface is 0.304 mm,the width of each serration of Fresnel lens is 0.0234 mm,the length of the Fresnel lens is 2.87 mm,and the center height of star-shaped LCD switch is 0.030 mm,the center length is 0.040 mm,the width of star-shaped LCD switch is 0.050 mm,and the image crosstalk is less than 2%when the viewing distance is 2.50 m.The problem on the brightness of the image in different positions is improved.展开更多
Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—red...Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.展开更多
Eco-friendly quantum-dot light-emitting diodes(QLEDs),which employ colloidal quantum dots(QDs)such as InP,and ZnSe,stand out due to their low toxicity,color purity,and high efficiency.Currently,significant advancement...Eco-friendly quantum-dot light-emitting diodes(QLEDs),which employ colloidal quantum dots(QDs)such as InP,and ZnSe,stand out due to their low toxicity,color purity,and high efficiency.Currently,significant advancements have been made in the performance of cadmium-free QLEDs.However,several challenges persist in the industrialization of ecofriendly QLED displays.For instance,(1)the poor performance,characterized by low photoluminescence quantum yield(PLQY),unstable ligand,and charge imbalance,cannot be effectively addressed with a solitary strategy;(2)the degradation mechanism,involving emission quenching,morphological inhomogeneity,and field-enhanced electron delocalization remains unclear;(3)the lack of techniques for color patterning,such as optical lithography and transfer printing.Herein,we undertake a specific review of all technological breakthroughs that endeavor to tackle the above challenges associated with cadmium-free QLED displays.We begin by reviewing the evolution,architecture,and operational characteristics of eco-friendly QLEDs,highlighting the photoelectric properties of QDs,carrier transport layer stability,and device lifetime.Subsequently,we focus our attention not only on the latest insights into device degradation mechanisms,particularly,but also on the remarkable technological progress in color patterning techniques.To conclude,we provide a synthesis of the promising prospects,current challenges,potential solutions,and emerging research trends for QLED displays.展开更多
The evolution of display backplane technologies has been driven by the relentless pursuit of higher form factor and superior performance coupled with lower power consumption.Current state-of-the-art backplane technolo...The evolution of display backplane technologies has been driven by the relentless pursuit of higher form factor and superior performance coupled with lower power consumption.Current state-of-the-art backplane technologies based on amorphous Si,poly Si,and IGZO,face challenges in meeting the requirements of next-generation displays,including larger dimensions,higher refresh rates,increased pixel density,greater brightness,and reduced power consumption.In this context,2D chalcogenides have emerged as promising candidates for thin-film transistors(TFTs)in display backplanes,offering advantages such as high mobility,low leakage current,mechanical robustness,and transparency.This comprehensive review explores the significance of 2D chalcogenides as materials for TFTs in next-generation display backplanes.We delve into the structural characteristics,electronic properties,and synthesis methods of 2D chalcogenides,emphasizing scalable growth strategies that are relevant to large-area display backplanes.Additionally,we discuss mechanical flexibility and strain engineering,crucial for the development of flexible displays.Performance enhancement strategies for 2D chalcogenide TFTs have been explored encompassing techniques in device engineering and geometry optimization,while considering scaling over a large area.Active-matrix implementation of 2D TFTs in various applications is also explored,benchmarking device performance on a large scale which is a necessary aspect of TFTs used in display backplanes.Furthermore,the latest development on the integration of 2D chalcogenide TFTs with different display technologies,such as OLED,quantum dot,and MicroLED displays has been reviewed in detail.Finally,challenges and opportunities in the field are discussed with a brief insight into emerging trends and research directions.展开更多
基金funded by the National Natural Science Foundation of China (No. 31300829)Natural Science Foundation of Hubei Province of China (No. 2014CFC1117)Open Research Fund Program of the State Key Laboratory of Virology of China (No. 2015IOV002)
文摘Ferric and ferrous ion plays critical roles in bioprocesses,their influences in many fields have not been fully explored due to the lack of methods for quantification of ferric and ferrous ions in biological system or complex matrix.In this study,an M13 bacteriophage(phage) was engineered for use as a sensor for ferric and ferrous ions via the display of a tyrosine residue on the P8 coat protein.The interaction between the specific phenol group of tyrosine and Fe^(3+)./ Fe^(2+).was used as the sensor.Transmission electron microscopy showed aggregation of the tyrosine-displaying phages after incubation with Fe^(3+) and Fe^(2+).The aggregated phages infected the host bacterium inefficiently.This phenomenon could be utilized for detection of ferric and ferrous ions.For ferric ions,a calibration curve ranging from 200 nmol/L to 8 μmol/L with a detection limit of 58 nmol/L was acquired.For ferrous ions,a calibration curve ranging from 800 nmol/L to 8μmol/L with a detection limit of 641.7 nmol/L was acquired.The assay was specific for Fe^((3+)) and Fe^((2+)) when tested against Ni^(2+),Pb^(2+),Zn^(2+),Mn^(2+),Co^(2+),Ca^(2+),Cu^(2+),Cr^(3+),Ba^(2+),and K^+.The tyrosine displaying phage to Fe^(3+) and Fe^(2+) interaction would have plenty of room in application to biomatenals and bionanotechnology.
文摘Hepatitis B virus (HBV) is one of the major causes of chronic hepatitis, cirrhosis and liver cancer. In combating HBV infections, HBV diagnosis and vaccination are therefore critical. The hepatitis B virus surface antigen (HBsAg) is a key target molecule in developing vaccines and diagnostic systems. To date, although HBsAg has been expressed in bacteria, yeasts and mammalian cells, there are still limitations in the existing ones, which leave the necessity for searching new HBsAg production methods. In this study, a simple phage display-based method was developed to produce the purified full-length HBsAg molecules for further immunization studies. For this purpose, the HBsAg coding gene was cloned into a pCANTAB5E phagemid vector and expressed on the surface of M13 filamentous phages. The HBsAg-expressing phage nanosystem was then used as immunization agent in BALB/cJ mice. The ELISA results for sera obtained from mice immunized with HBsAg-displaying phage particles revealed an immune response against HBsAg. These results demonstrate the potential use of a full-length antigen to be displayed on phages as cost effective adjuvant-free immunization agents as an alternative to the highly purified and more expensive antigens conjugated with carrier molecules.
文摘Three-dimensional(3D) display technology—a cutting-edge medium for human-machine interaction—enhances visual information density via image dimensional expansion and reduces the cognitive load to improve the efficiency of information exchange [1–3].
基金The work is supported by the Research Funds of Long-Range Weather Prediction,State Meteorological Ad.ministration.China
文摘Limitations of difference maps showing circulation anomalies are analyzed, and the definition of the local pattern analogue coefficient (LPAC) is given together with the procedure for constructing such a map, followed by an example illustrating its useful application in circulation anomaly.
基金supported by the Leading-Edge Technology Program of Jiangsu Natural Science Foundation of China under Grant No.BK20202001the National Natural Science Foundation of China under Grant No.61932021.
文摘Mobile applications(apps for short)often need to display images.However,inefficient image displaying(IID)issues are pervasive in mobile apps,and can severely impact app performance and user experience.This paper first establishes a descriptive framework for the image displaying procedures of IID issues.Based on the descriptive framework,we conduct an empirical study of 216 real-world IID issues collected from 243 popular open-source Android apps to validate the presence and severity of IID issues,and then shed light on these issues’characteristics to support research on effective issue detection.With the findings of this study,we propose a static IID issue detection tool TAPIR and evaluate it with 243 real-world Android apps.Encouragingly,49 and 64 previously-unknown IID issues in two different versions of 16 apps reported by TAPIR are manually confirmed as true positives,respectively,and 16 previously-unknown IID issues reported by TAPIR have been confirmed by developers and 13 have been fixed.Then,we further evaluate the performance impact of these detected IID issues and the performance improvement if they are fixed.The results demonstrate that the IID issues detected by TAPIR indeed cause significant performance degradation,which further show the effectiveness and efficiency of TAPIR.
文摘Beijing Museum of Natural History is located in Chongwen District, close to the Temple of Heaven and Tianqiao Theater. It was founded in 1951 and formally named Beijing Museum of Natural History in 1962.
文摘A method of drawing color spectrogram of speech by using microcomputer is described in this paper , and referred to the metod of drawing spectrogram by computer . With the software and no addition any other aqripment., we can draw color three - dimension spectrogram ( or black -white spectrogram without color monitor ), and it is similar to spectrogram of sonagrapher .
基金the National Natural Science Foundation of China(No.32171471)Key Research and Development Project of Shandong Province,China(2019JZZY020605)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,Top-notch Academic Programs Project of Jiangsu Higher Education Institutions.
文摘Trehalose is a disaccharide with many applications in cosmetics,refrigeration,and food.Trehalose synthase is a significant enzyme in trehalose production.Escherichia coli is usually used to express this enzyme heterologously.Since E.coli is a pathogenic strain,we chose Corynebacterium glutamicum ATCC13032 as an engineering strain in this study for food safety reasons.Because of its poor permeability,we constructed two recombinant C.glutamicum strains using two anchor proteins,PorH,and short-length NCgl1337,to anchor trehalose synthase from Streptomyces coelicolor on the cell surface and synthesize trehalose directly from maltose.Studies on enzymatic properties indicated that NCgl1337S–ScTreSK246A had better enzyme activity and thermal stability than the free enzyme.After optimizing the whole-cell transformation,the optimal transformation condition was 35°C,pH 7.0,and OD600 of 30.Under this condition,the conversion rate of 300 g/L maltose reached 69.5%in a 5 L fermentor.The relative conversion rate was still above 75%after repeated five times.
基金supported by the 111 Project(No.111-2-06)National Natural Science Foundation of China(32001064)+2 种基金Key Research and Development Program of China(2021YFC2100102-03)China Postdoctoral Science Foundation(2020M671331)Postgraduate Research and Practice Innovation Program of Jiangsu Province(No.KYCX20-1807).
文摘The purpose of this study was to assess the potential application of cell surface display in Candida tropicalis.Surface display gene cassettes were constructed using five anchoring proteins from Saccharomyces cerevisiae,three of which[(suppression of exponential defect protein,SED1),(cell wall protein 2,CWP2)and(delayed anaerobic protein 4,DAN4)]were reported to show higher activity of heterologous proteins thanα-agglutinin(AGα1).The performance of yeast-enhanced green fluorescent protein(yeGFP)was evaluated using laser scanning confocal microscopy and flow cytometry.The results showed that the three anchoring regions(SED1,CWP2 and AGα1)successfully displayed yeGFP on the cell wall.To investigate the effect of the three anchoring proteins on the surface display of Rhizopus oryzaeα-amylase(ROA1)and Aspergillus aculeatusβ-glucosidase(BGL1)in C.tropicalis,we constructed surface display gene cassettes for ROA1 and BGL1,respectively.The strains containing the anchoring proteins SED1 and CWP2 showed higher activity of ROA1 and BGL1 than the strains containing the anchoring protein AGα1.The highest ROA1 and BGL1 activities of strains with SED1 were 6.37 U/g CDW and 7.93 U/g CDW,respectively,which were sixfold and eightfold higher than those of strain with AGα1.In addition,we also optimized signal peptides.The results indicated that signal peptides have an impact on enzyme activity.
基金supported by the Ministry of Science and Technology of the People's Republic of China(MOST)(2022YFA1203001,2022YFA1203002)National Natural Science Foundation of China(NSFC)(T2321003,22335003,T2222005,22175042)Science and Technology Commission of Shanghai Municipality(STCSM)(21511104900)。
文摘Smart electronic textiles with electronic functions like displaying can provide transformative opportunities for wearable devices that traditional rigid devices are hard to realize.A general strategy of enabling textiles to display is weaving light-emitting fibers into textiles and designing control circuits.However,it remains challenging for the current electronic textiles to display full-color images and videos.Here,we demonstrate a large-area integrated electronic textile system(with a size of 72 cm×50 cm)by weaving light-emitting diode(LED)fibers,touch-sensing fibers and polyester fibers,which could display full-color images(with a gamut of 117.6%NTSC)and continuous videos(with a refresh rate of 11.7 Hz)by designing low-voltage supply mode and parallelly transmitting circuits.After integration of touch-sensing fibers,such textile system could achieve various touch display and interactive functions like smart phones or computers,including hand input of text,hand painting,computing and playing games.The stability and durability of textile system withstanding 5000 bending cycles was also demonstrated for wearable applications.The integrated electronic textile system shows similar flexibility and breathability with regular textiles,which is promising to serve as new human-machine interface to change the way in which people interact with electronics.
基金supported by the National Key R&D Program of China(2022YFB3606501,2022YFB3602902)the Key projects of National Natural Science Foundation of China(62234004)+8 种基金the National Natural Science Foundation of China(U23A2092)Pioneer and Leading Goose R&D Program of Zhejiang(2024C01191,2024C01092)Innovation and Entrepreneurship Team of Zhejiang Province(2021R01003)Ningbo Key Technologies R&D Program(2022Z085),Ningbo 3315 Programme(2020A-01-B)YONGJIANG Talent Introduction Programme(2021A-038-B,2021A-159-G)“Innovation Yongjiang 2035”Key R&D Programme(2024Z146)Ningbo JiangBei District public welfare science and technology project(2022C07)the China National Postdoctoral Program for Innovative Talents(grant no.BX20240391)the China Postdoctoral Science Foundation(grant no.2023M743623).
文摘High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.
文摘It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.
基金supported by the National Natural Science Foundation of China(No.62374142)Fundamental Research Funds for the Central Universities(Nos.20720220085 and 20720240064)+2 种基金External Cooperation Program of Fujian(No.2022I0004)Major Science and Technology Project of Xiamen in China(No.3502Z20191015)Xiamen Natural Science Foundation Youth Project(No.3502Z202471002)。
文摘Super-fine electrohydrodynamic inkjet(SIJ)printing of perovskite nanocrystal(PNC)colloid ink exhibits significant potential in the fabrication of high-resolution color conversion microstructures arrays for fullcolor micro-LED displays.However,the impact of solvent on both the printing process and the morphology of SIJ-printed PNC color conversion microstructures remains underexplored.In this study,we prepared samples of CsPbBr3PNC colloid inks in various solvents and investigated the solvent's impact on SIJ printed PNC microstructures.Our findings reveal that the boiling point of the solvent is crucial to the SIJ printing process of PNC colloid inks.Only does the boiling point of the solvent fall in the optimal range,the regular positioned,micron-scaled,conical PNC microstructures can be successfully printed.Below this optimal range,the ink is unable to be ejected from the nozzle;while above this range,irregular positioned microstructures with nanoscale height and coffee-ring-like morphology are produced.Based on these observations,high-resolution color conversion PNC microstructures were effectively prepared using SIJ printing of PNC colloid ink dispersed in dimethylbenzene solvent.
基金supports from the National Key Research and Development Program of China(2023YFB2806803)the National Natural Science Foundation of China(62075127).
文摘Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However,chromatic aberration remains a serious longstanding problem for diffractive optics,hindering their broader adoption.To overcome the chromatic aberrations for red,green and blue(RGB)light sources,in this paper,we propose a counterintuitive multi-twist structure to achieve narrowband PBOEs without crosstalk,which plays a vital role to eliminate the chromatic aberration.The performance of our designed and fabricated narrowband Pacharatnam-Berry lenses(PBLs)aligns well with our simulation results.Furthermore,in a feasibility demonstration experiment using a laser projector,our proposed PBL system indeed exhibits a diminished chromatic aberration as compared to a broadband PBL.Additionally,polarization raytracing is implemented to demonstrate the versatility of the multi-twist structure for designing any RGB wavelengths with high contrast ratios.This analysis explores the feasibility of using RGB laser lines and quantum dot light-emitting diodes.Overall,our approach enables high optical efficiency,low fabrication complexity,and high degree of design freedom to accommodate any liquid crystal material and RGB light sources,holding immense potential for widespread applications of achromatic PBOEs.
基金supported by the 2022 Fujian Provincial Young and Middle-aged Teacher Education and Research Project(Science and Technology)(No.JAT220468)the Xiamen Natural Science Foundation(No.3502Z20227334).
文摘At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficulty.Based on the principle of naked-eye 3D display and the Fresnel optical theory,this paper designs a Fresnel lens array and the star-shaped liquid crystal display(LCD)switch of unit LCD screen to achieve low-crosstalk and high brightness uniformity for the autostereoscopic 3D display.The unit parameters of a 139.7 cm 4K model autostereoscopic 3D displayer are provided and they are optimized by the TracePro software.The results show that when the pitch of the Fresnel lens on the exit surface is 0.304 mm,the width of each serration of Fresnel lens is 0.0234 mm,the length of the Fresnel lens is 2.87 mm,and the center height of star-shaped LCD switch is 0.030 mm,the center length is 0.040 mm,the width of star-shaped LCD switch is 0.050 mm,and the image crosstalk is less than 2%when the viewing distance is 2.50 m.The problem on the brightness of the image in different positions is improved.
基金supported by Basic Science Research Program through the National Research Foundation(NRF)of Korea,funded by the Ministry of Science and ICT(MSIT),Korea[2022R1A2C2091671]by ITECH R&D Program of MOTIE/KEIT(Ministry of Trade,Industry&Energy/Korea Evaluation Institute of Industrial Technology)[20016808].
文摘Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.
基金supported by the Research Projects of Department of Education of Guangdong Province-024CJPT002Special Project of Guangdong Provincial Department of Education in Key Areas (No. 6021210075K)Shenzhen Polytechnic University Research Fund. (No. 6024310006K)
文摘Eco-friendly quantum-dot light-emitting diodes(QLEDs),which employ colloidal quantum dots(QDs)such as InP,and ZnSe,stand out due to their low toxicity,color purity,and high efficiency.Currently,significant advancements have been made in the performance of cadmium-free QLEDs.However,several challenges persist in the industrialization of ecofriendly QLED displays.For instance,(1)the poor performance,characterized by low photoluminescence quantum yield(PLQY),unstable ligand,and charge imbalance,cannot be effectively addressed with a solitary strategy;(2)the degradation mechanism,involving emission quenching,morphological inhomogeneity,and field-enhanced electron delocalization remains unclear;(3)the lack of techniques for color patterning,such as optical lithography and transfer printing.Herein,we undertake a specific review of all technological breakthroughs that endeavor to tackle the above challenges associated with cadmium-free QLED displays.We begin by reviewing the evolution,architecture,and operational characteristics of eco-friendly QLEDs,highlighting the photoelectric properties of QDs,carrier transport layer stability,and device lifetime.Subsequently,we focus our attention not only on the latest insights into device degradation mechanisms,particularly,but also on the remarkable technological progress in color patterning techniques.To conclude,we provide a synthesis of the promising prospects,current challenges,potential solutions,and emerging research trends for QLED displays.
基金supported in part by the National Research Foundation of Korea Grant Number:RS-2024-00448809National Research Foundation of Korea Grant Number:RS-2025-00517255+1 种基金National Research Foundation of Korea Grant Number:No.2021M3H4A1A02056037supported by Basic Science Research Program through the National Research Foundation of Korean(NRF)funded by the Ministry of Education(2020R1A6A1A03040516).
文摘The evolution of display backplane technologies has been driven by the relentless pursuit of higher form factor and superior performance coupled with lower power consumption.Current state-of-the-art backplane technologies based on amorphous Si,poly Si,and IGZO,face challenges in meeting the requirements of next-generation displays,including larger dimensions,higher refresh rates,increased pixel density,greater brightness,and reduced power consumption.In this context,2D chalcogenides have emerged as promising candidates for thin-film transistors(TFTs)in display backplanes,offering advantages such as high mobility,low leakage current,mechanical robustness,and transparency.This comprehensive review explores the significance of 2D chalcogenides as materials for TFTs in next-generation display backplanes.We delve into the structural characteristics,electronic properties,and synthesis methods of 2D chalcogenides,emphasizing scalable growth strategies that are relevant to large-area display backplanes.Additionally,we discuss mechanical flexibility and strain engineering,crucial for the development of flexible displays.Performance enhancement strategies for 2D chalcogenide TFTs have been explored encompassing techniques in device engineering and geometry optimization,while considering scaling over a large area.Active-matrix implementation of 2D TFTs in various applications is also explored,benchmarking device performance on a large scale which is a necessary aspect of TFTs used in display backplanes.Furthermore,the latest development on the integration of 2D chalcogenide TFTs with different display technologies,such as OLED,quantum dot,and MicroLED displays has been reviewed in detail.Finally,challenges and opportunities in the field are discussed with a brief insight into emerging trends and research directions.
