Diamonds were formed in the mantle lithosphere,mostly at depths of 150~200km in the centres of Precambrian cratons,the buoyant ancient cores of continents.From there they were normally transported into the upper crust...Diamonds were formed in the mantle lithosphere,mostly at depths of 150~200km in the centres of Precambrian cratons,the buoyant ancient cores of continents.From there they were normally transported into the upper crust in kimberlite pipes whose diamonds are largely colourless and light yellow related to trace element N(Ia type),although brown,green,and more rarely blue-coloured diamonds are related to lattice defect and trace amounts of H,more rarely B and Ni.Pink diamonds are extremely rare in the approximately 90 diamondiferous pipes mined globally.Although small quantities have been discovered elsewhere,about 90%have been mined from the ca.1.3Ga Argyle diamond pipe in Western Australia,with the Arkhangelskaya diamond pipe in Russia the only other significant source.The pink colour at both Argyle and Arkhangelskaya is unrelated to trace elements and instead results from absorption of light from nanoscale(550nm)defects related to shear stress and plastic deformation.Macroscopically,defects are shown by glide planes,lamellae,and grain lines imposed on the originally colourless diamonds derived from their mantle source.The key question is why these defects were uniquely acquired in diamonds in the Argyle and Arkhangelskaya pipes.Unlike most diamondiferous pipes,Argyle is a rare diamondiferous volatile-rich lamproite pipe that was emplaced into the multiply deformed and rifted NNE-trending Halls Creek Orogen on the margin of the Kimberley Craton.Similarly,Arkhangelskaya in the Devonian Lomonosov kimberlite cluster is a volatile-rich low-Ti type kimberlite,a close relative to lamproite,that was emplaced into the multiply deformed Lapland-Kola Orogen on the rifted margin of the Kola Craton.These craton margins are underlain by subduction-induced volatile-enriched metasomatized mantle lithosphere in contrast to the more primeval mantle under craton centres.It is thus likely that shear stresses were exacerbated at Argyle and Arkangelskaya by rapid vertical emplacement of the anomalous volatile-enriched magmas at supercritical pressures and temperatures,that induced catastrophic phase separation of these volatiles and'mini seismic events'during rapid pressure drops during ascent from 200km depth to the surface.Such a mechanism is consistent with the presence of strongly resorbed and plastically deformed small brown industrial diamonds in the Argyle pipe.From a China perspective,it is potentially important that at 1.3Ga the alkaline Argyle pipe in northern Australia is placed adjacent to the North China Craton(NCC),with numerous world-class mineral deposits including the giant ca.1.4~1.2Ga alkaline Bayan Obo REE system on its margin.However,it is the southeastern margin of the Yangtze Craton and the Jiangnan Orogen with their lamproite pipes derived from metasomatized mantle lithosphere that present the most prospective regions for pink diamond occurrences.展开更多
The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor depositio...The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor deposition,combined with in situ optical emission spectroscopy,enables precise control over growth modes through plasma parameter tuning.In this study,we examine how methane concentration,microwave power,and gas pressure influence plasma species and,consequently,the growth modes of heteroepitaxial diamond by optical emission spectroscopy and scanning electron microscope.At low nucleation densities,increased methane concentrations promote the transition from faceted polyhedral to ballas structures,driven by elevated C_(2) radical concentrations in the plasma.Conversely,at higher nucleation densities,gas pressure,and substrate temperature dominate growth mode determination,leading to diverse morphologies,such as planar,polycrystalline,octahedral,and step-flow growth.These findings elucidate the interplay among plasma species,growth parameters,and growth mode,offering critical insights for optimizing growth conditions and preparing heteroepitaxial diamond films in a specific growth mode.展开更多
Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.W...Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.We investigated the formation of nitrogen-induced diaph-ite structures(hybrid diamond-graphite phases)and their role in changing the conductivity.Nitrogen doping in a hy-drogen-rich plasma environment promotes the emergence of unique sp^(3)-sp^(2)bonding interfaces,where diamond grains are covalently integrated with graphitic domains,facilitating a structure-driven electronic transition.High-resolution transmis-sion electron microscopy and selected area electron diffraction reveal five-fold,six-fold and twelve-fold symmetries,along with an atypical{200}crystallographic reflection,confirming diaphite formation in 5%and 10%N-doped UNCD films,while high-er doping levels(15%and 20%)result in extensive graphitization.Raman spectroscopy tracks the evolution of sp^(2)bonding with increasing nitrogen content,while atomic force microscopy and X-ray diffraction indicate a consistent diamond grain size of~8 nm.Cryogenic electronic transport measurements reveal a conductivity increase from 8.72 to 708 S/cm as the nitrogen dop-ing level increases from 5%to 20%,which is attributed to defect-mediated carrier transport and 3D weak localization.The res-ulting conductivity is three orders of magnitude higher than previously reported.These findings establish a direct correlation between diaphite structural polymorphism and tunable electronic properties in nitrogen-doped UNCD films,offering new ways for defect-engineering diamond-based electronic materials.展开更多
Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machin...Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.展开更多
Ag-Cu-In-Ti low-temperature filler was used to braze the diamond and copper,and the effects of brazing temperature and soaking time on the microstructure and mechanical properties of the joints were investigated.In ad...Ag-Cu-In-Ti low-temperature filler was used to braze the diamond and copper,and the effects of brazing temperature and soaking time on the microstructure and mechanical properties of the joints were investigated.In addition,the joint formation mechanism was discussed,and the correlation between joint microstructure and mechanical performance was established.Results show that adding appropriate amount of In into the filler can significantly reduce the filler melting point and enhance the wettability of filler on diamond.When the brazing temperature is 750°C and the soaking time is 10 min,a uniformly dense braze seam with excellent metallurgical bonding can be obtained,and its average joint shear strength reaches 322 MPa.The lower brazing temperature can mitigate the risk of diamond graphitization and also reduce the residual stresses during joining.展开更多
Diamond coatings possess numerous excellent properties,making them desirable materials for high-performance surface applications.However,without a revolutionary surface modification method,the surface roughness and fr...Diamond coatings possess numerous excellent properties,making them desirable materials for high-performance surface applications.However,without a revolutionary surface modification method,the surface roughness and friction behavior of diamond coatings can impede their ability to meet the demanding requirements of advanced engineering surfaces.This study proposed the thermal stress control at coating interfaces and demonstrated a novel process of precise graphenization on conventional diamond coatings surface through laser induction and mechanical cleavage,without causing damage to the metal substrate.Through experiments and simulations,the influence mechanism of surface graphitization and interfacial thermal stress was elucidated,ultimately enabling rapid conversion of the diamond coating surface to graphene while controlling the coating’s thickness and roughness.Compared to the original diamond coatings,the obtained surfaces exhibited a 63%-72%reduction in friction coefficients,all of which were below 0.1,with a minimum of 0.06,and a 59%-67%decrease in specific wear rates.Moreover,adhesive wear in the friction counterpart was significantly inhibited,resulting in a reduction in wear by 49%-83%.This demonstrated a significant improvement in lubrication and inhibition of mechanochemical wear properties.This study provides an effective and cost-efficient avenue to overcome the application bottleneck of engineered diamond surfaces,with the potential to significantly enhance the performance and expand the application range of diamond-coated components.展开更多
This article provides an overview of the laboratory-grown diamonds seen at GIA over the last 15 years.During that time,the diamond industry has witnessed an exponential increase in the quantity and quality of laborato...This article provides an overview of the laboratory-grown diamonds seen at GIA over the last 15 years.During that time,the diamond industry has witnessed an exponential increase in the quantity and quality of laboratory-grown diamonds and,therefore,these products’ability to be commercialized on a large scale.It presents a brief summary of the HPHT and CVD growth processes and then explores some of the major trends observed since GIA began providing synthetic diamond grading reports in 2007.These trends include the shift towards larger and colorless stones.It also shows a shift towards CVD diamonds dominating the supply of laboratory-grown diamonds submitted for grading reports and that the majority of these have been subjected to post-growth HPHT treatment.In addition,we briefly discuss some methods and strategies used for identification such as the distinguishing gemological characteristics and some recent approaches in advanced testing.Finally,we present an array of laboratory-grown diamonds that are currently unusual,however,these may become more common in the future.展开更多
Lonsdaleite,also known as hexagonal diamond,is an allotrope of carbon with a hexagonal crystal structure,which was discovered in the nanostructure of the Canyon Diablo meteorite.Theoretical calculations have shown tha...Lonsdaleite,also known as hexagonal diamond,is an allotrope of carbon with a hexagonal crystal structure,which was discovered in the nanostructure of the Canyon Diablo meteorite.Theoretical calculations have shown that this structure gives it exceptional physical properties that exceed those of cubic diamond,making it highly promising for groundbreaking applications in superhard cutting tools,wide-bandgap semiconductor devices,and materials for extreme environments.As a result,the controllable synthesis of hexagonal diamond has emerged as a cutting-edge research focus in materials science.This review briefly outlines the progress in this area,with a focus on the mechanisms governing its key synthesis conditions,its intrinsic physical properties,and its potential applications in various fields.展开更多
Diamond combines many unique properties,including high stability,strong optical dispersion,excellent mechanical strength,and outstanding thermal conductivity.Its structure,surface groups,and electrical conductivity ar...Diamond combines many unique properties,including high stability,strong optical dispersion,excellent mechanical strength,and outstanding thermal conductivity.Its structure,surface groups,and electrical conductivity are also tunable,increasing its functional versatility.These make diamond and its related materials,such as its composites,highly promising for various applications in energy fields.This review summarizes recent advances and key achievements in energy storage and conversion,covering electrochemical energy storage(e.g.,batteries and supercapacitors),electrocatalytic energy conversion(e.g.,CO_(2)and nitrogen reduction reactions),and solar energy conversion(e.g.,photo-(electro)chemical CO_(2)and nitrogen reduction reactions,and solar cells).Current challenges and prospects related to the synthesis of diamond materials and the technologies for their energy applications are outlined and discussed.展开更多
A specific revised HFCVD apparatus and a novel process combining HFCVD and polishing technique were presented to deposit the micro-and nano-crystalline multilayered ultra-smooth diamond（USCD） film on the interior-ho...A specific revised HFCVD apparatus and a novel process combining HFCVD and polishing technique were presented to deposit the micro-and nano-crystalline multilayered ultra-smooth diamond（USCD） film on the interior-hole surface of WC-Co drawing dies with aperture ranging from d1.0 mm to 60 mm.Characterization results indicate that the surface roughness values（Ra） in the entry zone,drawing zone and bearing zone of as-fabricated USCD coated drawing die were measured as low as 25.7,23.3 and 25.5 nm,respectively.Furthermore,the friction properties of USCD films were examined in both dry sliding and water-lubricating conditions,and the results show that the USCD film presents much superior friction properties.Its friction coefficients against ball-bearing steel,copper and silicon nitride balls（d4 mm）,is always lower than that of microcrystalline diamond（MCD） or WC-Co sample,regardless of the lubricating condition.Meanwhile,it still presents competitive wear resistance with the MCD films.Finally,the working lifetime and performance of as-fabricated USCD coated drawing dies were examined under producing low-carbon steel pipes in dry-sliding and water-lubricating conditions.Under the water-lubricating drawing condition,its production significantly increases by about 20 times compared with the conventional WC-Co drawing dies.展开更多
The features of optical defects in a chemical vapor deposition (CVD) synthetic type Ⅱ a diamond were characterized using photoluminescence (PL) spectroscopy, before and after electron irradiation. The sample was cut ...The features of optical defects in a chemical vapor deposition (CVD) synthetic type Ⅱ a diamond were characterized using photoluminescence (PL) spectroscopy, before and after electron irradiation. The sample was cut within a {100} growth layer, and irradiated with 2 MeV electrons along the <100> axis. PL spectra of sample were collected under 532 nm and 355 nm laser excitation, at room temperature and 77 K, and linear scanning analysis along incident depth was applied to determine the distribution of defects. The pre-irradiation characterization results revealed uniformly distributed PL centers at 389 nm, 469 nm, 533 nm, 575 nm (ZPL of NV 0), 637 nm (ZPL of NV -), and 736.7/737.1 nm (ZPL doublet of SiV -). After irradiation, the differential responses of these as-grown defects were observed, alongside the emergence of irradiation-induced defects, namely 489 nm center, H3 center (ZPL at 504 nm) and GR1 center (ZPL at 741 nm). The maximum penetration depth of 2 MeV electron-irradiation induced defects was determined to be 2.1 mm. This work primarily presents the depth profiles of both as-grown and irradiation-induced defects in 2 MeV electrons irradiated diamond. The result provides experimental data for better understanding of the radiation effect in diamonds. Serving as a reference for diamond enhancement by electron irradiation.展开更多
The interfacial strength has a significant impact on mechanical properties of diamond composites.In this work,polycrystalline diamonds(PCDs)with medium-entropy alloy(MEA)binders and traditional Co binder were prepared...The interfacial strength has a significant impact on mechanical properties of diamond composites.In this work,polycrystalline diamonds(PCDs)with medium-entropy alloy(MEA)binders and traditional Co binder were prepared at high-pressure and high-temperature.Microstructures and interfacial strengths are carefully characterized using TEM.The results show that diamond particles are well bonded to form skeletons in all PCDs.The interfaces between MEA binders and diamond can be fully coherent.Due to the effect of Cr element and Cr-carbide,the PCD with Co_(50) Ni_(40) Fe_(10)-Cr_(3)C_(2) binder exhibits the highest interfacial bonding strength(1176.6 MPa)and highest fracture toughness(9.97 MPa m^(1/2)).The mechanical analyses indicate that both the interface and diamond skeleton have important effects on the fracture toughness of PCD.The interface with a higher bonding strength,a higher engineering strain and a higher elastic modulus can endure more stress,thereby improving the fracture toughness.展开更多
It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament ch...It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament chemical vapor deposition setup,followed by annealing treatment under different temperatures at ambient pressure.The results indicate that when the annealing temperature increases from 700℃ to 1000℃,the size of the 2D-diamond found in the samples gradually increases from close to 20 nm to around 30 nm.Meanwhile,the size and number of amorphous carbon spheres and Ta-containing compounds between the graphene layers gradually increase.As the annealing temperature continues to rise to 1100℃,a significant aggregation of Ta-containing compounds is observed in the samples,with no diamond structure detected.This further confirms that monodisperse Ta atoms play a key role in graphene phase transition into 2D-diamond.This study provides a novel method for the ambient-pressure phase transition of graphene into 2D-diamond.展开更多
With the global oil and gas industry increasingly targeting ultra-deep well development,the demand for wear resistance in polycrystalline diamond compact(PDC)bits is increasing.However,further improvement of the mecha...With the global oil and gas industry increasingly targeting ultra-deep well development,the demand for wear resistance in polycrystalline diamond compact(PDC)bits is increasing.However,further improvement of the mechanical properties of PDC incurs prohibitively elevated costs and stringent technological challenges.Here,we present a two-stage high-pressure infiltration(HPI)methodology involving cobalt removal pretreatment followed by lubricant infiltration.The successful infiltration of lubricants into diamond micropores has been systematically verified,and the effects of lubricant phase composition,infiltration pressure,and temperature on infiltration depth have been thoroughly investigated.Fractal dimension analysis characterizes the pore structure of cobalt-removed diamonds,revealing a strong correlation between the fractal dimension and friction coefficient reduction.Tribological testing confirms the formation of lubricating films at friction interfaces,achieving a 71.5%reduction in the coefficient of friction for lubricant-containing diamond materials.This straightforward strategy opens a gate to developing the next generation of self-lubricating diamond materials.展开更多
文摘Diamonds were formed in the mantle lithosphere,mostly at depths of 150~200km in the centres of Precambrian cratons,the buoyant ancient cores of continents.From there they were normally transported into the upper crust in kimberlite pipes whose diamonds are largely colourless and light yellow related to trace element N(Ia type),although brown,green,and more rarely blue-coloured diamonds are related to lattice defect and trace amounts of H,more rarely B and Ni.Pink diamonds are extremely rare in the approximately 90 diamondiferous pipes mined globally.Although small quantities have been discovered elsewhere,about 90%have been mined from the ca.1.3Ga Argyle diamond pipe in Western Australia,with the Arkhangelskaya diamond pipe in Russia the only other significant source.The pink colour at both Argyle and Arkhangelskaya is unrelated to trace elements and instead results from absorption of light from nanoscale(550nm)defects related to shear stress and plastic deformation.Macroscopically,defects are shown by glide planes,lamellae,and grain lines imposed on the originally colourless diamonds derived from their mantle source.The key question is why these defects were uniquely acquired in diamonds in the Argyle and Arkhangelskaya pipes.Unlike most diamondiferous pipes,Argyle is a rare diamondiferous volatile-rich lamproite pipe that was emplaced into the multiply deformed and rifted NNE-trending Halls Creek Orogen on the margin of the Kimberley Craton.Similarly,Arkhangelskaya in the Devonian Lomonosov kimberlite cluster is a volatile-rich low-Ti type kimberlite,a close relative to lamproite,that was emplaced into the multiply deformed Lapland-Kola Orogen on the rifted margin of the Kola Craton.These craton margins are underlain by subduction-induced volatile-enriched metasomatized mantle lithosphere in contrast to the more primeval mantle under craton centres.It is thus likely that shear stresses were exacerbated at Argyle and Arkangelskaya by rapid vertical emplacement of the anomalous volatile-enriched magmas at supercritical pressures and temperatures,that induced catastrophic phase separation of these volatiles and'mini seismic events'during rapid pressure drops during ascent from 200km depth to the surface.Such a mechanism is consistent with the presence of strongly resorbed and plastically deformed small brown industrial diamonds in the Argyle pipe.From a China perspective,it is potentially important that at 1.3Ga the alkaline Argyle pipe in northern Australia is placed adjacent to the North China Craton(NCC),with numerous world-class mineral deposits including the giant ca.1.4~1.2Ga alkaline Bayan Obo REE system on its margin.However,it is the southeastern margin of the Yangtze Craton and the Jiangnan Orogen with their lamproite pipes derived from metasomatized mantle lithosphere that present the most prospective regions for pink diamond occurrences.
基金funded by the National Key Research and Development Program of China(Grant No.2022YFB3608602)the National Natural Science Foundation of China(Grant Nos.62404215 and 62574199)Instrument and Equipment Development Project of CAS(Grant No.PTYQ2024TD0003)。
文摘The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor deposition,combined with in situ optical emission spectroscopy,enables precise control over growth modes through plasma parameter tuning.In this study,we examine how methane concentration,microwave power,and gas pressure influence plasma species and,consequently,the growth modes of heteroepitaxial diamond by optical emission spectroscopy and scanning electron microscope.At low nucleation densities,increased methane concentrations promote the transition from faceted polyhedral to ballas structures,driven by elevated C_(2) radical concentrations in the plasma.Conversely,at higher nucleation densities,gas pressure,and substrate temperature dominate growth mode determination,leading to diverse morphologies,such as planar,polycrystalline,octahedral,and step-flow growth.These findings elucidate the interplay among plasma species,growth parameters,and growth mode,offering critical insights for optimizing growth conditions and preparing heteroepitaxial diamond films in a specific growth mode.
文摘Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.We investigated the formation of nitrogen-induced diaph-ite structures(hybrid diamond-graphite phases)and their role in changing the conductivity.Nitrogen doping in a hy-drogen-rich plasma environment promotes the emergence of unique sp^(3)-sp^(2)bonding interfaces,where diamond grains are covalently integrated with graphitic domains,facilitating a structure-driven electronic transition.High-resolution transmis-sion electron microscopy and selected area electron diffraction reveal five-fold,six-fold and twelve-fold symmetries,along with an atypical{200}crystallographic reflection,confirming diaphite formation in 5%and 10%N-doped UNCD films,while high-er doping levels(15%and 20%)result in extensive graphitization.Raman spectroscopy tracks the evolution of sp^(2)bonding with increasing nitrogen content,while atomic force microscopy and X-ray diffraction indicate a consistent diamond grain size of~8 nm.Cryogenic electronic transport measurements reveal a conductivity increase from 8.72 to 708 S/cm as the nitrogen dop-ing level increases from 5%to 20%,which is attributed to defect-mediated carrier transport and 3D weak localization.The res-ulting conductivity is three orders of magnitude higher than previously reported.These findings establish a direct correlation between diaphite structural polymorphism and tunable electronic properties in nitrogen-doped UNCD films,offering new ways for defect-engineering diamond-based electronic materials.
基金financial support from the National Key Research and Development Program of China(2018YFA0703400)the Fundamental Research Funds for the Provincial Universities of Zhejiang(GK239909299001021)+1 种基金the Ninth China Association for Science and Technology Youth Talent Lift Project Support Plan(KYZ015324002)the Changjiang Scholars Program of Chinese Ministry of Education。
文摘Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.
基金National MCF Energy R&D Program(2019YFE03100400)。
文摘Ag-Cu-In-Ti low-temperature filler was used to braze the diamond and copper,and the effects of brazing temperature and soaking time on the microstructure and mechanical properties of the joints were investigated.In addition,the joint formation mechanism was discussed,and the correlation between joint microstructure and mechanical performance was established.Results show that adding appropriate amount of In into the filler can significantly reduce the filler melting point and enhance the wettability of filler on diamond.When the brazing temperature is 750°C and the soaking time is 10 min,a uniformly dense braze seam with excellent metallurgical bonding can be obtained,and its average joint shear strength reaches 322 MPa.The lower brazing temperature can mitigate the risk of diamond graphitization and also reduce the residual stresses during joining.
基金support from the National Natural Science Foundation of China(NSFC)[No.52475464,52475463]National Natural Science Foundation of Jiangsu Province(No.BK20231442)+4 种基金the Fundamental Research Funds for the Central Universities(No.NS2024032)the International Joint Laboratory of Sustainable Manufacturing,Ministry of Education and the Fundamental Research Funds for the Central Universities(No.NG2024007)China Scholarship Council(No.202206830048)the Foundation of the Graduate Innovation Center,Nanjing University of Aeronautics and Astronautics(No.kfjj20200510)Funding for Outstanding Doctoral Dissertation in NUAA(No.BCXJ23-09)。
文摘Diamond coatings possess numerous excellent properties,making them desirable materials for high-performance surface applications.However,without a revolutionary surface modification method,the surface roughness and friction behavior of diamond coatings can impede their ability to meet the demanding requirements of advanced engineering surfaces.This study proposed the thermal stress control at coating interfaces and demonstrated a novel process of precise graphenization on conventional diamond coatings surface through laser induction and mechanical cleavage,without causing damage to the metal substrate.Through experiments and simulations,the influence mechanism of surface graphitization and interfacial thermal stress was elucidated,ultimately enabling rapid conversion of the diamond coating surface to graphene while controlling the coating’s thickness and roughness.Compared to the original diamond coatings,the obtained surfaces exhibited a 63%-72%reduction in friction coefficients,all of which were below 0.1,with a minimum of 0.06,and a 59%-67%decrease in specific wear rates.Moreover,adhesive wear in the friction counterpart was significantly inhibited,resulting in a reduction in wear by 49%-83%.This demonstrated a significant improvement in lubrication and inhibition of mechanochemical wear properties.This study provides an effective and cost-efficient avenue to overcome the application bottleneck of engineered diamond surfaces,with the potential to significantly enhance the performance and expand the application range of diamond-coated components.
文摘This article provides an overview of the laboratory-grown diamonds seen at GIA over the last 15 years.During that time,the diamond industry has witnessed an exponential increase in the quantity and quality of laboratory-grown diamonds and,therefore,these products’ability to be commercialized on a large scale.It presents a brief summary of the HPHT and CVD growth processes and then explores some of the major trends observed since GIA began providing synthetic diamond grading reports in 2007.These trends include the shift towards larger and colorless stones.It also shows a shift towards CVD diamonds dominating the supply of laboratory-grown diamonds submitted for grading reports and that the majority of these have been subjected to post-growth HPHT treatment.In addition,we briefly discuss some methods and strategies used for identification such as the distinguishing gemological characteristics and some recent approaches in advanced testing.Finally,we present an array of laboratory-grown diamonds that are currently unusual,however,these may become more common in the future.
基金the National Natural Science Foundation of China(12274170 and 52225203)。
文摘Lonsdaleite,also known as hexagonal diamond,is an allotrope of carbon with a hexagonal crystal structure,which was discovered in the nanostructure of the Canyon Diablo meteorite.Theoretical calculations have shown that this structure gives it exceptional physical properties that exceed those of cubic diamond,making it highly promising for groundbreaking applications in superhard cutting tools,wide-bandgap semiconductor devices,and materials for extreme environments.As a result,the controllable synthesis of hexagonal diamond has emerged as a cutting-edge research focus in materials science.This review briefly outlines the progress in this area,with a focus on the mechanisms governing its key synthesis conditions,its intrinsic physical properties,and its potential applications in various fields.
基金西南大学中央高校基本科研业务费项目(SWU-KT22030)重庆市教育委员会科学技术研究项目(KJQN202300205)Deutsche Forschungsgemeinschaft(DFG,German Research Foundation,457444676).
文摘Diamond combines many unique properties,including high stability,strong optical dispersion,excellent mechanical strength,and outstanding thermal conductivity.Its structure,surface groups,and electrical conductivity are also tunable,increasing its functional versatility.These make diamond and its related materials,such as its composites,highly promising for various applications in energy fields.This review summarizes recent advances and key achievements in energy storage and conversion,covering electrochemical energy storage(e.g.,batteries and supercapacitors),electrocatalytic energy conversion(e.g.,CO_(2)and nitrogen reduction reactions),and solar energy conversion(e.g.,photo-(electro)chemical CO_(2)and nitrogen reduction reactions,and solar cells).Current challenges and prospects related to the synthesis of diamond materials and the technologies for their energy applications are outlined and discussed.
基金Project(51005154) supported by the National Natural Science Foundation of ChinaProject(12CG11) supported by the Chenguang Program of Shanghai Municipal Education Commission,ChinaProject(201104271) supported by the China Postdoctoral Science Foundation Special Funded Project
文摘A specific revised HFCVD apparatus and a novel process combining HFCVD and polishing technique were presented to deposit the micro-and nano-crystalline multilayered ultra-smooth diamond（USCD） film on the interior-hole surface of WC-Co drawing dies with aperture ranging from d1.0 mm to 60 mm.Characterization results indicate that the surface roughness values（Ra） in the entry zone,drawing zone and bearing zone of as-fabricated USCD coated drawing die were measured as low as 25.7,23.3 and 25.5 nm,respectively.Furthermore,the friction properties of USCD films were examined in both dry sliding and water-lubricating conditions,and the results show that the USCD film presents much superior friction properties.Its friction coefficients against ball-bearing steel,copper and silicon nitride balls（d4 mm）,is always lower than that of microcrystalline diamond（MCD） or WC-Co sample,regardless of the lubricating condition.Meanwhile,it still presents competitive wear resistance with the MCD films.Finally,the working lifetime and performance of as-fabricated USCD coated drawing dies were examined under producing low-carbon steel pipes in dry-sliding and water-lubricating conditions.Under the water-lubricating drawing condition,its production significantly increases by about 20 times compared with the conventional WC-Co drawing dies.
基金This work is supported by National Natural Science Foundation of China(No.42372054)。
文摘The features of optical defects in a chemical vapor deposition (CVD) synthetic type Ⅱ a diamond were characterized using photoluminescence (PL) spectroscopy, before and after electron irradiation. The sample was cut within a {100} growth layer, and irradiated with 2 MeV electrons along the <100> axis. PL spectra of sample were collected under 532 nm and 355 nm laser excitation, at room temperature and 77 K, and linear scanning analysis along incident depth was applied to determine the distribution of defects. The pre-irradiation characterization results revealed uniformly distributed PL centers at 389 nm, 469 nm, 533 nm, 575 nm (ZPL of NV 0), 637 nm (ZPL of NV -), and 736.7/737.1 nm (ZPL doublet of SiV -). After irradiation, the differential responses of these as-grown defects were observed, alongside the emergence of irradiation-induced defects, namely 489 nm center, H3 center (ZPL at 504 nm) and GR1 center (ZPL at 741 nm). The maximum penetration depth of 2 MeV electron-irradiation induced defects was determined to be 2.1 mm. This work primarily presents the depth profiles of both as-grown and irradiation-induced defects in 2 MeV electrons irradiated diamond. The result provides experimental data for better understanding of the radiation effect in diamonds. Serving as a reference for diamond enhancement by electron irradiation.
基金financially supported by the Regional Innova-tion and Development Joint Funds of the National Natural Science Foundation of China(No.U20A20236)the Central South Univer-sity Innovation-Driven Research Programme(No.2023CXQD030)the Huaqiao University Engineering Research Center of Brittle Materials Machining(MOE,No.2023IME-002).
文摘The interfacial strength has a significant impact on mechanical properties of diamond composites.In this work,polycrystalline diamonds(PCDs)with medium-entropy alloy(MEA)binders and traditional Co binder were prepared at high-pressure and high-temperature.Microstructures and interfacial strengths are carefully characterized using TEM.The results show that diamond particles are well bonded to form skeletons in all PCDs.The interfaces between MEA binders and diamond can be fully coherent.Due to the effect of Cr element and Cr-carbide,the PCD with Co_(50) Ni_(40) Fe_(10)-Cr_(3)C_(2) binder exhibits the highest interfacial bonding strength(1176.6 MPa)and highest fracture toughness(9.97 MPa m^(1/2)).The mechanical analyses indicate that both the interface and diamond skeleton have important effects on the fracture toughness of PCD.The interface with a higher bonding strength,a higher engineering strain and a higher elastic modulus can endure more stress,thereby improving the fracture toughness.
基金supported by the Key Project of the National Natural Science Foundation of China(Grant No.U1809210)the International Science Technology Cooperation Program of China(Grant No.2014DFR51160)+3 种基金the One Belt and One Road International Cooperation Project from the Key Research and Development Program of Zhejiang Province,China(Grant No.2018C04021)the National Natural Science Foundation of China(Grant Nos.50972129,50602039,and 52102052)the Fund from Institute of Wenzhou,Zhejiang University(Grant Nos.XMGL-CX-202305 and XMGLKJZX-202307)the Project from Tanghe Scientific&Technology Company(Grant No.KYY-HX-20230024).
文摘It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament chemical vapor deposition setup,followed by annealing treatment under different temperatures at ambient pressure.The results indicate that when the annealing temperature increases from 700℃ to 1000℃,the size of the 2D-diamond found in the samples gradually increases from close to 20 nm to around 30 nm.Meanwhile,the size and number of amorphous carbon spheres and Ta-containing compounds between the graphene layers gradually increase.As the annealing temperature continues to rise to 1100℃,a significant aggregation of Ta-containing compounds is observed in the samples,with no diamond structure detected.This further confirms that monodisperse Ta atoms play a key role in graphene phase transition into 2D-diamond.This study provides a novel method for the ambient-pressure phase transition of graphene into 2D-diamond.
基金supported by the National Natural Science Foundation of China(grant number:52203375 and 52073254)。
文摘With the global oil and gas industry increasingly targeting ultra-deep well development,the demand for wear resistance in polycrystalline diamond compact(PDC)bits is increasing.However,further improvement of the mechanical properties of PDC incurs prohibitively elevated costs and stringent technological challenges.Here,we present a two-stage high-pressure infiltration(HPI)methodology involving cobalt removal pretreatment followed by lubricant infiltration.The successful infiltration of lubricants into diamond micropores has been systematically verified,and the effects of lubricant phase composition,infiltration pressure,and temperature on infiltration depth have been thoroughly investigated.Fractal dimension analysis characterizes the pore structure of cobalt-removed diamonds,revealing a strong correlation between the fractal dimension and friction coefficient reduction.Tribological testing confirms the formation of lubricating films at friction interfaces,achieving a 71.5%reduction in the coefficient of friction for lubricant-containing diamond materials.This straightforward strategy opens a gate to developing the next generation of self-lubricating diamond materials.
