An 1.5D equilibrium evolution code was used to model the time evolution of the first ohmic discharges in the EAST experiment. Good agreement between the simulation and the experimental results was obtained in the plas...An 1.5D equilibrium evolution code was used to model the time evolution of the first ohmic discharges in the EAST experiment. Good agreement between the simulation and the experimental results was obtained in the plasma current, major radius, electron temperature, loop voltage and poloidal field （PF） current for the entire duration of the discharge, which indicates that the code is highly reliable and will allow to further study the EAST discharge. At the same time, the code also simulates some important plasma parameters without experimental measured data yet, such as the plasma minor radius, central and edge safety factors, elongation and triangilarity, which are important in the analysis of EAST data.展开更多
The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and tw...The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and twodimensional particle flow models were established.The principal stress and principal strain distributions surrounding the four-arc-shaped and inverted U-shaped tunnels were investigated,respectively.Numerical results indicated that the dip angle combination of preexisting fractures directly affects the principal stress,principal strain distribution and the failure characteristics around the tunnel.The larger the absolute value of the preexisting fracture inclination angle,the higher the crushing degree of compression splitting near the hance and the larger the V-shaped failure zone.With a decrease in the absolute value of the preexisting fracture inclination angle,the compressive stress concentration of the sidewall with preexisting fractures gradually increases.The types of cracks initiated around the four-arc-shaped tunnel and the inverted U-shape tunnel are different.When the fractures are almost vertical,they have a significant influence on the stress of the sidewall force of the four-arc-shaped tunnel.When the fractures are almost horizontal,they have a significant influence on the stress of the sidewall of the inverted U-shaped tunnel.The findings provide a theoretical support for the local strengthening design of the tunnel supporting structure.展开更多
It is important to calibrate micro-parameters for applying partied flow code(PFC)to study mechanical characteristics and failure mechanism of rock materials.Uniform design method is firstly adopted to determine the mi...It is important to calibrate micro-parameters for applying partied flow code(PFC)to study mechanical characteristics and failure mechanism of rock materials.Uniform design method is firstly adopted to determine the microscopic parameters of parallel-bonded particle model for three-dimensional discrete element particle flow code(PFC3D).Variation ranges of microscopic of the microscopic parameters are created by analyzing the effects of microscopic parameters on macroscopic parameters(elastic modulus E,Poisson ratio v,uniaxial compressive strengthσc,and ratio of crack initial stress to uniaxial compressive strengthσci/σc)in order to obtain the actual uniform design talbe.The calculation equations of the microscopic and macroscopic parameters of rock materials can be established by the actual uniform design table and the regression analysis and thus the PFC3D microscopic parameters can be quantitatively determined.The PFC3D simulated results of the intact and pre-cracked rock specimens under uniaxial and triaxial compressions(including the macroscopic mechanical parameters,stress−strain curves and failure process)are in good agreement with experimental results,which can prove the validity of the calculation equations of microscopic and macroscopic parameters.展开更多
Following the success of the audio video standard （AVS） for 2D video coding, in 2008, the China AVS workgroup started developing 3D video （3DV） coding techniques. In this paper, we discuss the background, technica...Following the success of the audio video standard （AVS） for 2D video coding, in 2008, the China AVS workgroup started developing 3D video （3DV） coding techniques. In this paper, we discuss the background, technical features, and applications of AVS 3DV coding technology. We introduce two core techniques used in AVS 3DV coding： inter-view prediction and enhanced stereo packing coding. We elaborate on these techniques, which are used in the AVS real-time 3DV encoder. An application of the AVS 3DV coding system is presented to show the great practical value of this system. Simulation results show that the advanced techniques used in AVS 3DV coding provide remarkable coding gain compared with techniques used in a simulcast scheme.展开更多
Discontinuities are often considered as important factors responsible for the instability caused by shear failure in engineering rock mass,and energy-driven instability is the root cause of rock failure.However,few st...Discontinuities are often considered as important factors responsible for the instability caused by shear failure in engineering rock mass,and energy-driven instability is the root cause of rock failure.However,few studies focus on the energy evolution during the failure process using a three-dimensional(3D)numerical model.In this study,a series of laboratory direct shear tests on rock-like samples is numer-ically simulated using bonded particle models(BPMs)with multiple combinations of discontinuous in the particle flow code(PFC3D),in which the location and size of the particles conform to the uniform distribution.The effects of joint row number and inclination on the stress-strain characteristics and failure mode of rock were studied from the perspective of microcrack growth and energy evolution.The results showed that,when the number of joint rows Nr>1,the shear failure region does not change with the increase of Nr for the type B(2-columnn multiple-row at center)and the type C(2-column multiple-row at edge)as compared to the type A(1-column multiple-row at center)joint models.Notably,joints significantly increase the post-peak energy dissipation but have little effect on the proportion of energy before the peak.Friction consumes most of the energy while kinetic energy accounts for less than 1%of total energy during the shear process.Peak elastic strain energy follows the variation trend of peak shear displacement.The development and accumulation of microcracks directly affect the energy dissipation,and there is a significant linear relationship between the cumulative number of critical microcracks and the critical dissipated energy at the failure,when the dip direction of joints is opposite to the shear direction,more microcracks will be accumulated at the peak time,resulting in more energy dissipation.The results contribute to deeply understanding the shear failure process of non-persistent jointed mass.展开更多
A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unr...A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unreinforced and H-V reinforced foundations are simulated by PFC2D method. The interface between particles and reinforcements, and the reinforcement mechanism of the H-V reinforced foundations are studied through stress distribution graphs, displacement vector graphs and contact force graphs. The simulation results demonstrate that the vertical elements of the H-V reinforcement keep the particles from being displaced under the applied load. The H-V reinforcement can distribute the load uniformly over a wider area, thereby improving the bearing capacity of soil foundation.展开更多
After the extension of depth modeling mode 4(DMM-4)in 3D high efficiency video coding(3D-HEVC),the computational complexity increases sharply,which causes the real-time performance of video coding to be impacted.To re...After the extension of depth modeling mode 4(DMM-4)in 3D high efficiency video coding(3D-HEVC),the computational complexity increases sharply,which causes the real-time performance of video coding to be impacted.To reduce the computational complexity of DMM-4,a simplified hardware-friendly contour prediction algorithm is proposed in this paper.Based on the similarity between texture and depth map,the proposed algorithm directly codes depth blocks to calculate edge regions to reduce the number of reference blocks.Through the verification of the test sequence on HTM16.1,the proposed algorithm coding time is reduced by 9.42%compared with the original algorithm.To avoid the time consuming of serial coding on HTM,a parallelization design of the proposed algorithm based on reconfigurable array processor(DPR-CODEC)is proposed.The parallelization design reduces the storage access time,configuration time and saves the storage cost.Verified with the Xilinx Virtex 6 FPGA,experimental results show that parallelization design is capable of processing HD 1080p at a speed above 30 frames per second.Compared with the related work,the scheme reduces the LUTs by 42.3%,the REG by 85.5%and the hardware resources by 66.7%.The data loading speedup ratio of parallel scheme can reach 3.4539.On average,the different sized templates serial/parallel speedup ratio of encoding time can reach 2.446.展开更多
A new three-dimensional(3D) audio coding approach is presented to improve the spatial perceptual quality of 3D audio. Different from other audio coding approaches, the distance side information is also quantified, and...A new three-dimensional(3D) audio coding approach is presented to improve the spatial perceptual quality of 3D audio. Different from other audio coding approaches, the distance side information is also quantified, and the non-uniform perceptual quantization is proposed based on the spatial perception features of the human auditory system, which is named as concentric spheres spatial quantization(CSSQ) method. Comparison results were presented, which showed that a better distance perceptual quality of 3D audio can be enhanced by 5.7%~8.8% through extracting and coding the distance side information comparing with the directional audio coding, and the bit rate of our coding method is decreased of 8.07% comparing with the spatial squeeze surround audio coding.展开更多
A reduction in the track width of magnetic recording systems results in a welcome increase in Areal Density(AD),but can severely deteriorate system performance in the unfortunate appearance of extreme Inter-Track Inte...A reduction in the track width of magnetic recording systems results in a welcome increase in Areal Density(AD),but can severely deteriorate system performance in the unfortunate appearance of extreme Inter-Track Interference(ITI).The effect of severe ITI may be mitigated by using coding schemes.In this paper,therefore,we present a rate-5/62-Dimensional(2D)modulation code based on a proposed Single-Reader/Two-track Reading(SRTR)technique to cope with this serious problem in staggered Bit-Pattemed Magnetic Recording(BPMR)systems.We then evaluate the Bit-Error Rate(BER)performance of the proposed system in the presence of media noises,e.g.,position and size fluctuations.Our simulation results indicate that,at the same User Density(UD),the proposed system performs better than an uncoded system by about 1.0 dB at the BER of 105 and is also superior to the conventional recording system.展开更多
To reduce the computational complexity and storage cost caused by wedge segmentation algorithm,a scheme of simplifying wedge matching is proposed.It takes advantage of the correlation of the wedge separation line of d...To reduce the computational complexity and storage cost caused by wedge segmentation algorithm,a scheme of simplifying wedge matching is proposed.It takes advantage of the correlation of the wedge separation line of depth map and the direction of intra-prediction for 3D high-efficiency video coding(3D-HEVC).According to the difference of wedge segmentation between adjacent edge and opposite edge,a set only including 104×4 wedgelet templates is given.By expanding of the wedge wave of a certain minimum unit,a simple separation line acquisition method for different size of depth block is put forward.Furthermore,based on the array processor(DPR-CODEC)developed by project team,an efficient parallel scheme of the improved wedge segmentation mode prediction is introduced.By the scheme,prediction unit(PU)size can be changed randomly from 4×4 to 8×8,16×16,and 32×32,which is more in line with the needs of the HEVC standard.Veri-fied with test sequence in HTM16.1 and the Xilinx virtex-6 field programmable gate array(FPGA)respectively,the experiment results show that the proposed methods save 99.2%of the storage space and 63.94%of the encoding time,the serial/parallel acceleration ratio of each template reaches 1.84 in average.The coding performance,storage and resource consumption are considered for both.展开更多
This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weather...This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weathering on limestone using the freezing and thawing(F-T)for 40 cycles.The mechanical parameters of the samples were measured at the end of the 40th cycle.In the second configuration,a series of specimens underwent salt crystallization(S-C)tests for 20 cycles.Experimental results were validated using discrete element method(DEM).Next,the weathered limestone model with dimensions of 108 mm54 mm were prepared.The weathering layers were tested at four different thicknesses(i.e.2.5 mm,5 mm,7.5 mm,and 10 mm)and three different positions(at the surface,5 mm under the rock surface,and 10 mm under the rock surface).According to the results,weathering depth and thickness have a considerable effect on the failure process.The results also showed a correlation between the values of compressive strength and failure mechanisms associated with the weathering layer.The numerical results revealed that the tension crack was the dominant factor.Additionally,with increasing weathering thickness,Young's modulus,crack initiation stress,and final strength decreased in constant weathering depth.The results also demonstrated that the failure progress of the numerical models was similar to that observed in the laboratory.展开更多
We explore the properties of 4110 nuclides from Z=5 to Z=82 with the Sky3D code and the composition of the outer crust in magnetars under extreme magnetic fields.The effects of the variation in nuclear masses due to m...We explore the properties of 4110 nuclides from Z=5 to Z=82 with the Sky3D code and the composition of the outer crust in magnetars under extreme magnetic fields.The effects of the variation in nuclear masses due to magnetic fields on the outer crust are comprehensively studied.The neutron-drip transition pressure,equation of state,and neutron fraction in the outer crust are also discussed.展开更多
基金National Natural Science Foundation of China(No.10505022)the National Meg-Science Engineering Project of the Chinese Government
文摘An 1.5D equilibrium evolution code was used to model the time evolution of the first ohmic discharges in the EAST experiment. Good agreement between the simulation and the experimental results was obtained in the plasma current, major radius, electron temperature, loop voltage and poloidal field （PF） current for the entire duration of the discharge, which indicates that the code is highly reliable and will allow to further study the EAST discharge. At the same time, the code also simulates some important plasma parameters without experimental measured data yet, such as the plasma minor radius, central and edge safety factors, elongation and triangilarity, which are important in the analysis of EAST data.
基金Project(41807241) supported by the National Natural Science Foundation of ChinaProject(2021M693544) supported by China Postdoctoral Science FoundationProject(2022JM-160) supported by the Natural Science Basic Research Program of Shaanxi,China。
文摘The complexity of a rock masses structure can lead to high uncertainties and risk during underground engineering construction.Laboratory tests on fractured rock-like materials containing a tunnel were conducted,and twodimensional particle flow models were established.The principal stress and principal strain distributions surrounding the four-arc-shaped and inverted U-shaped tunnels were investigated,respectively.Numerical results indicated that the dip angle combination of preexisting fractures directly affects the principal stress,principal strain distribution and the failure characteristics around the tunnel.The larger the absolute value of the preexisting fracture inclination angle,the higher the crushing degree of compression splitting near the hance and the larger the V-shaped failure zone.With a decrease in the absolute value of the preexisting fracture inclination angle,the compressive stress concentration of the sidewall with preexisting fractures gradually increases.The types of cracks initiated around the four-arc-shaped tunnel and the inverted U-shape tunnel are different.When the fractures are almost vertical,they have a significant influence on the stress of the sidewall force of the four-arc-shaped tunnel.When the fractures are almost horizontal,they have a significant influence on the stress of the sidewall of the inverted U-shaped tunnel.The findings provide a theoretical support for the local strengthening design of the tunnel supporting structure.
基金Projects(51474251,51874351)supported by the National Natural Science Foundation,China。
文摘It is important to calibrate micro-parameters for applying partied flow code(PFC)to study mechanical characteristics and failure mechanism of rock materials.Uniform design method is firstly adopted to determine the microscopic parameters of parallel-bonded particle model for three-dimensional discrete element particle flow code(PFC3D).Variation ranges of microscopic of the microscopic parameters are created by analyzing the effects of microscopic parameters on macroscopic parameters(elastic modulus E,Poisson ratio v,uniaxial compressive strengthσc,and ratio of crack initial stress to uniaxial compressive strengthσci/σc)in order to obtain the actual uniform design talbe.The calculation equations of the microscopic and macroscopic parameters of rock materials can be established by the actual uniform design table and the regression analysis and thus the PFC3D microscopic parameters can be quantitatively determined.The PFC3D simulated results of the intact and pre-cracked rock specimens under uniaxial and triaxial compressions(including the macroscopic mechanical parameters,stress−strain curves and failure process)are in good agreement with experimental results,which can prove the validity of the calculation equations of microscopic and macroscopic parameters.
文摘Following the success of the audio video standard （AVS） for 2D video coding, in 2008, the China AVS workgroup started developing 3D video （3DV） coding techniques. In this paper, we discuss the background, technical features, and applications of AVS 3DV coding technology. We introduce two core techniques used in AVS 3DV coding： inter-view prediction and enhanced stereo packing coding. We elaborate on these techniques, which are used in the AVS real-time 3DV encoder. An application of the AVS 3DV coding system is presented to show the great practical value of this system. Simulation results show that the advanced techniques used in AVS 3DV coding provide remarkable coding gain compared with techniques used in a simulcast scheme.
基金supported by the National Natural Science Foundation of China(Grant No.41825018)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904).
文摘Discontinuities are often considered as important factors responsible for the instability caused by shear failure in engineering rock mass,and energy-driven instability is the root cause of rock failure.However,few studies focus on the energy evolution during the failure process using a three-dimensional(3D)numerical model.In this study,a series of laboratory direct shear tests on rock-like samples is numer-ically simulated using bonded particle models(BPMs)with multiple combinations of discontinuous in the particle flow code(PFC3D),in which the location and size of the particles conform to the uniform distribution.The effects of joint row number and inclination on the stress-strain characteristics and failure mode of rock were studied from the perspective of microcrack growth and energy evolution.The results showed that,when the number of joint rows Nr>1,the shear failure region does not change with the increase of Nr for the type B(2-columnn multiple-row at center)and the type C(2-column multiple-row at edge)as compared to the type A(1-column multiple-row at center)joint models.Notably,joints significantly increase the post-peak energy dissipation but have little effect on the proportion of energy before the peak.Friction consumes most of the energy while kinetic energy accounts for less than 1%of total energy during the shear process.Peak elastic strain energy follows the variation trend of peak shear displacement.The development and accumulation of microcracks directly affect the energy dissipation,and there is a significant linear relationship between the cumulative number of critical microcracks and the critical dissipated energy at the failure,when the dip direction of joints is opposite to the shear direction,more microcracks will be accumulated at the peak time,resulting in more energy dissipation.The results contribute to deeply understanding the shear failure process of non-persistent jointed mass.
基金the National Natural Science Foundation of China (Nos. 41202215 and 40972192)the Innovation Program of Shanghai Municipal Education Commission (No. 11ZZ88)the Innovation Foundation of Shanghai University
文摘A two-dimensionM discrete element code, particle flow code （PFC2D）, is employed to investigate foundations reinforced with horizontal-vertical （H-V） inclusions. The initial states and loading processes of both unreinforced and H-V reinforced foundations are simulated by PFC2D method. The interface between particles and reinforcements, and the reinforcement mechanism of the H-V reinforced foundations are studied through stress distribution graphs, displacement vector graphs and contact force graphs. The simulation results demonstrate that the vertical elements of the H-V reinforcement keep the particles from being displaced under the applied load. The H-V reinforcement can distribute the load uniformly over a wider area, thereby improving the bearing capacity of soil foundation.
基金Supported by the National Natural Science Foundation of China(No.61834005,61772417,61802304,61602377,61874087,61634004)the Shaanxi Province Key R&D Plan(No.2020JM-525,2021GY-029,2021KW-16)。
文摘After the extension of depth modeling mode 4(DMM-4)in 3D high efficiency video coding(3D-HEVC),the computational complexity increases sharply,which causes the real-time performance of video coding to be impacted.To reduce the computational complexity of DMM-4,a simplified hardware-friendly contour prediction algorithm is proposed in this paper.Based on the similarity between texture and depth map,the proposed algorithm directly codes depth blocks to calculate edge regions to reduce the number of reference blocks.Through the verification of the test sequence on HTM16.1,the proposed algorithm coding time is reduced by 9.42%compared with the original algorithm.To avoid the time consuming of serial coding on HTM,a parallelization design of the proposed algorithm based on reconfigurable array processor(DPR-CODEC)is proposed.The parallelization design reduces the storage access time,configuration time and saves the storage cost.Verified with the Xilinx Virtex 6 FPGA,experimental results show that parallelization design is capable of processing HD 1080p at a speed above 30 frames per second.Compared with the related work,the scheme reduces the LUTs by 42.3%,the REG by 85.5%and the hardware resources by 66.7%.The data loading speedup ratio of parallel scheme can reach 3.4539.On average,the different sized templates serial/parallel speedup ratio of encoding time can reach 2.446.
基金supported by National High Technology Research and Development Program of China (863 Program, No. 2015AA016306)National Nature Science Foundation of China (No. 61662010, 61231015, 61471271, 61761044, 61762005)
文摘A new three-dimensional(3D) audio coding approach is presented to improve the spatial perceptual quality of 3D audio. Different from other audio coding approaches, the distance side information is also quantified, and the non-uniform perceptual quantization is proposed based on the spatial perception features of the human auditory system, which is named as concentric spheres spatial quantization(CSSQ) method. Comparison results were presented, which showed that a better distance perceptual quality of 3D audio can be enhanced by 5.7%~8.8% through extracting and coding the distance side information comparing with the directional audio coding, and the bit rate of our coding method is decreased of 8.07% comparing with the spatial squeeze surround audio coding.
基金This work was patially supported by the Thailand Research Fund under the grant number RSA6080051,College of Advanced Manufacturing Innovation(AMD),and King Mongkut's Institute of Technology Ladkrabang(KMIIL),Thailand.
文摘A reduction in the track width of magnetic recording systems results in a welcome increase in Areal Density(AD),but can severely deteriorate system performance in the unfortunate appearance of extreme Inter-Track Interference(ITI).The effect of severe ITI may be mitigated by using coding schemes.In this paper,therefore,we present a rate-5/62-Dimensional(2D)modulation code based on a proposed Single-Reader/Two-track Reading(SRTR)technique to cope with this serious problem in staggered Bit-Pattemed Magnetic Recording(BPMR)systems.We then evaluate the Bit-Error Rate(BER)performance of the proposed system in the presence of media noises,e.g.,position and size fluctuations.Our simulation results indicate that,at the same User Density(UD),the proposed system performs better than an uncoded system by about 1.0 dB at the BER of 105 and is also superior to the conventional recording system.
基金the National Natural Science Foundation of China(No.61834005,61772417,61802304,61602377,61874087,61634004)Shaanxi International Science and Technology Cooperation Program(No.2018KW-006).
文摘To reduce the computational complexity and storage cost caused by wedge segmentation algorithm,a scheme of simplifying wedge matching is proposed.It takes advantage of the correlation of the wedge separation line of depth map and the direction of intra-prediction for 3D high-efficiency video coding(3D-HEVC).According to the difference of wedge segmentation between adjacent edge and opposite edge,a set only including 104×4 wedgelet templates is given.By expanding of the wedge wave of a certain minimum unit,a simple separation line acquisition method for different size of depth block is put forward.Furthermore,based on the array processor(DPR-CODEC)developed by project team,an efficient parallel scheme of the improved wedge segmentation mode prediction is introduced.By the scheme,prediction unit(PU)size can be changed randomly from 4×4 to 8×8,16×16,and 32×32,which is more in line with the needs of the HEVC standard.Veri-fied with test sequence in HTM16.1 and the Xilinx virtex-6 field programmable gate array(FPGA)respectively,the experiment results show that the proposed methods save 99.2%of the storage space and 63.94%of the encoding time,the serial/parallel acceleration ratio of each template reaches 1.84 in average.The coding performance,storage and resource consumption are considered for both.
文摘This study investigated the effects of weathering depth and thickness on the failure mechanisms of rock samples through experimental and numerical methods.The first configuration involved conducting artificial weathering on limestone using the freezing and thawing(F-T)for 40 cycles.The mechanical parameters of the samples were measured at the end of the 40th cycle.In the second configuration,a series of specimens underwent salt crystallization(S-C)tests for 20 cycles.Experimental results were validated using discrete element method(DEM).Next,the weathered limestone model with dimensions of 108 mm54 mm were prepared.The weathering layers were tested at four different thicknesses(i.e.2.5 mm,5 mm,7.5 mm,and 10 mm)and three different positions(at the surface,5 mm under the rock surface,and 10 mm under the rock surface).According to the results,weathering depth and thickness have a considerable effect on the failure process.The results also showed a correlation between the values of compressive strength and failure mechanisms associated with the weathering layer.The numerical results revealed that the tension crack was the dominant factor.Additionally,with increasing weathering thickness,Young's modulus,crack initiation stress,and final strength decreased in constant weathering depth.The results also demonstrated that the failure progress of the numerical models was similar to that observed in the laboratory.
基金Supported by the Changsha Municipal Natural Science Foundation(kq2007004)the Science Research Key Project of Education Department of Hunan Province(21A0186)the Construct Program of the Key Discipline in Hunan Province,China。
文摘We explore the properties of 4110 nuclides from Z=5 to Z=82 with the Sky3D code and the composition of the outer crust in magnetars under extreme magnetic fields.The effects of the variation in nuclear masses due to magnetic fields on the outer crust are comprehensively studied.The neutron-drip transition pressure,equation of state,and neutron fraction in the outer crust are also discussed.
