The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sinteri...The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sintering aid. Relative density, microstructure, Vickers hardness and bending strength as a function of sintering temperature and additive content were investigated. The experiment results show that liquid phase sintering at low temperature can be realized through adding CUO-16.7% TiO2 to 8YSZ. The Vickers hardness and bending strength of samples with sintering aid are generally much higher than those of samples without sintering aid for all sintering temperatures, and increase with the increase of sintering temperature. When the addition content of CUO-16.7% TiO2 is beyond 0.5%, the relative density, Vickers hardness and bending strength decrease with the increase of the mass ratio of sintering aid. Low additions of sintering aid are beneficial to aiding densification; high additions of sintering aid are detrimental to the sintered properties mainly due to greater amounts of pores generated by the volatilization of oxygen with the eutectic reaction between copper oxide and titanium dioxide. It is found that the fine grain size and high relative density are two main reasons of the high bending strength and Vickers hardness of the materials.展开更多
A rapid and energy-efficient method was presented for preparing CuO-TiO2 nanotube arrays. TiO2 nanotube arrays were first prepared by anodic oxidation using titanium anode and platinum cathode. Then, the formed TiO2 n...A rapid and energy-efficient method was presented for preparing CuO-TiO2 nanotube arrays. TiO2 nanotube arrays were first prepared by anodic oxidation using titanium anode and platinum cathode. Then, the formed TiO2 nanotube arrays and Pt were used as cathode and anode, respectively, for subsequent formation of CuO-TiO2 nanotube arrays, through an electro- chemical process in a solution of 0.1 mol/L CuSO4. The morphology and composition of the CuO-TiO2 nanotube arrays were characterized using field-emission scanning electron microscopy, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, and UV-Vis diffusion reflection spectroscopy （UV-Vis DRS）. XPS and XRD analyses suggested that the Cu element in the nanotubes existed in CuO form, and its content changed along with the voltage during the second electrochemical process. The photocatalytic activities of the CuO-TiO2 nanotube arrays were evaluated by the degradation of a model dye, rhodamine B. The results showed that Cu incorporation aroused wide visible-light adsorption and improved the photocatalytic efficiency of TiO2 nanotube arrays significantly under visible-light irradiation. The stability of the CuO-TiO2 nanotube arrays was also detected.展开更多
基金Project(200805331062) supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProject(2010FJ4061) supported by the Science and Technology Program of Hunan Province,China
文摘The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sintering aid. Relative density, microstructure, Vickers hardness and bending strength as a function of sintering temperature and additive content were investigated. The experiment results show that liquid phase sintering at low temperature can be realized through adding CUO-16.7% TiO2 to 8YSZ. The Vickers hardness and bending strength of samples with sintering aid are generally much higher than those of samples without sintering aid for all sintering temperatures, and increase with the increase of sintering temperature. When the addition content of CUO-16.7% TiO2 is beyond 0.5%, the relative density, Vickers hardness and bending strength decrease with the increase of the mass ratio of sintering aid. Low additions of sintering aid are beneficial to aiding densification; high additions of sintering aid are detrimental to the sintered properties mainly due to greater amounts of pores generated by the volatilization of oxygen with the eutectic reaction between copper oxide and titanium dioxide. It is found that the fine grain size and high relative density are two main reasons of the high bending strength and Vickers hardness of the materials.
基金financially supported by the National Natural Science Foundation of China(No.61173071)the Natural Science Foundation of Henan Province(No.112300413218)the Scientific Research Starting Foundation,Henan Normal University(No.1012)
文摘A rapid and energy-efficient method was presented for preparing CuO-TiO2 nanotube arrays. TiO2 nanotube arrays were first prepared by anodic oxidation using titanium anode and platinum cathode. Then, the formed TiO2 nanotube arrays and Pt were used as cathode and anode, respectively, for subsequent formation of CuO-TiO2 nanotube arrays, through an electro- chemical process in a solution of 0.1 mol/L CuSO4. The morphology and composition of the CuO-TiO2 nanotube arrays were characterized using field-emission scanning electron microscopy, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, and UV-Vis diffusion reflection spectroscopy （UV-Vis DRS）. XPS and XRD analyses suggested that the Cu element in the nanotubes existed in CuO form, and its content changed along with the voltage during the second electrochemical process. The photocatalytic activities of the CuO-TiO2 nanotube arrays were evaluated by the degradation of a model dye, rhodamine B. The results showed that Cu incorporation aroused wide visible-light adsorption and improved the photocatalytic efficiency of TiO2 nanotube arrays significantly under visible-light irradiation. The stability of the CuO-TiO2 nanotube arrays was also detected.
